MERZ Dental Brochure
-
Upload
skillbond-direct-ltd -
Category
Documents
-
view
261 -
download
7
description
Transcript of MERZ Dental Brochure
01494 448474 | [email protected] | www.skillbond.com
Open Monday to Friday 8.30am - 5.00pm. [Order online 24 hours]
2| www.skillbond.com
QUALITY BASED ON COMPETENCE100% Made in Germany
Modern prosthetics require base acrylics that offer a natural, aestheticappearance and are also not obvious to those with whom the patientcomes into contact. The dental materials produced by Merz Dentalmeet these requirements. They remain stable when subject to me-chanical, chemical, bacterial and thermal load, retain an accurate fitwhile being worn, are plaque-resistant, and are not subject to disco-louration.
For 60 years, Merz Dental has been producing prosthetic acrylicsbased on its own cutting-edge procedures and production techni-ques, and using only high-grade, superior quality polymers and colorants made in Germany at its company headquarters in Lütjenburg, Schleswig-Holstein.
Weropress® CC
Combipress N/LM CC
PremEco® Line CC
Promolux® HI HC
Promolux® HC
✔ ✔ ✔ ✔ ✔ ✔ ✔
complete dentures
partial dentures
hybrid prostheses,cover dentures,
combined dentures
bite appliances,shields
- ✔ ✔ ✔ ✔ ✔ ✔
✔ - ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ - - ✔ ✔
✔ ✔ ✔ - - ✔ ✔
1
relining materials
repairs,additions
modelcasting
QUALITY BASED ON COMPETENCE100% Made in Germany
Modern prosthetics require base acrylics that offer a natural, aestheticappearance and are also not obvious to those with whom the patientcomes into contact. The dental materials produced by Merz Dentalmeet these requirements. They remain stable when subject to me-chanical, chemical, bacterial and thermal load, retain an accurate fitwhile being worn, are plaque-resistant, and are not subject to disco-louration.
For 60 years, Merz Dental has been producing prosthetic acrylicsbased on its own cutting-edge procedures and production techni-ques, and using only high-grade, superior quality polymers and colorants made in Germany at its company headquarters in Lütjenburg, Schleswig-Holstein.
Weropress® CC
Combipress N/LM CC
PremEco® Line CC
Promolux® HI HC
Promolux® HC
✔ ✔ ✔ ✔ ✔ ✔ ✔
complete dentures
partial dentures
hybrid prostheses,cover dentures,
combined dentures
bite appliances,shields
- ✔ ✔ ✔ ✔ ✔ ✔
✔ - ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ - - ✔ ✔
✔ ✔ ✔ - - ✔ ✔
1
relining materials
repairs,additions
modelcasting
QUALITY BASED ON COMPETENCE100% Made in Germany
Modern prosthetics require base acrylics that offer a natural, aestheticappearance and are also not obvious to those with whom the patientcomes into contact. The dental materials produced by Merz Dentalmeet these requirements. They remain stable when subject to me-chanical, chemical, bacterial and thermal load, retain an accurate fitwhile being worn, are plaque-resistant, and are not subject to disco-louration.
For 60 years, Merz Dental has been producing prosthetic acrylicsbased on its own cutting-edge procedures and production techni-ques, and using only high-grade, superior quality polymers and colorants made in Germany at its company headquarters in Lütjenburg, Schleswig-Holstein.
Weropress® CC
Combipress N/LM CC
PremEco® Line CC
Promolux® HI HC
Promolux® HC
✔ ✔ ✔ ✔ ✔ ✔ ✔
complete dentures
partial dentures
hybrid prostheses,cover dentures,
combined dentures
bite appliances,shields
- ✔ ✔ ✔ ✔ ✔ ✔
✔ - ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ - - ✔ ✔
✔ ✔ ✔ - - ✔ ✔
1
relining materials
repairs,additions
modelcasting
QUALITY BASED ON COMPETENCE100% Made in Germany
Modern prosthetics require base acrylics that offer a natural, aesthetic appearance and are also not obvious to those with whom the patient comes into contact. The dental materials produced by Merz Dental meet these requirements. They remain stable when subject to mechanical, chemical, bacterial and thermal load, retain an accurate fit while being worn, are plaque-resistant, and are not subject to discolouration.For 60 years, Merz Dental has been producing prosthetic acrylics based on its own cutting-edge procedures and production techniques, and using only high-grade, superior quality polymers and colourants made in Germany at its company headquarters in Lütjenburg, Schleswig-Holstein.
ACRYLICS FOR LIFEPMMA polymethyl methacrylate
Polymethyl methacrylate (PMMA) has become part and parcel of ourdaily lives, and is one of the high-performance materials used for avariety of purposes. We trust PMMA in many areas of our lives, be itin the home, in technology or in medicine, for example ‒ and theseare just some of the application areas. PMMA is also used in aviationfor airplane windows, in optics for lenses and optical fibres, in joint re-placement as a cement for artificial hips, as well as in ophthalmologyfor artificial lens implants (intraocular lenses). In dentistry and dentaltechnology, PMMA has proven its worth for over 60 years thanks to itssuperior elasticity and impact strength, as well as its plaque and tem-perature resistance and stable form.
The dental polymethyl methacrylates developed by Merz Dental and produced using our own procedural technologies are part of thelatest and most innovative material generation. Their strength andstability as a medical product is due to exceptionally pure polymerswith varying geometries that are adapted to one another and prepa-red in multiple phases. The same applies with regard to curing therequired monomers so that cross-linked macromolecular networkstructures that are stable in the oral environment, dense and shock-absorbent can be achieved when processing prosthetic acrylics.One of the first dental materials to exhibit a cross-linked, and as aresult, three-dimensional network structure, was the interpenetratingpolymer network (IPN for short). It was developed and launched onthe market by Merz Dental in Lütjenburg.
2
Skillbond Merz Dental 2014
|3 +44(0)1494 448474 | [email protected] | www.skillbond.com
ACRYLICS FOR LIFEPMMA polymethyl methacrylate
Polymethyl methacrylate (PMMA) has become part and parcel of ourdaily lives, and is one of the high-performance materials used for avariety of purposes. We trust PMMA in many areas of our lives, be itin the home, in technology or in medicine, for example ‒ and theseare just some of the application areas. PMMA is also used in aviationfor airplane windows, in optics for lenses and optical fibres, in joint re-placement as a cement for artificial hips, as well as in ophthalmologyfor artificial lens implants (intraocular lenses). In dentistry and dentaltechnology, PMMA has proven its worth for over 60 years thanks to itssuperior elasticity and impact strength, as well as its plaque and tem-perature resistance and stable form.
The dental polymethyl methacrylates developed by Merz Dental and produced using our own procedural technologies are part of thelatest and most innovative material generation. Their strength andstability as a medical product is due to exceptionally pure polymerswith varying geometries that are adapted to one another and prepa-red in multiple phases. The same applies with regard to curing therequired monomers so that cross-linked macromolecular networkstructures that are stable in the oral environment, dense and shock-absorbent can be achieved when processing prosthetic acrylics.One of the first dental materials to exhibit a cross-linked, and as aresult, three-dimensional network structure, was the interpenetratingpolymer network (IPN for short). It was developed and launched onthe market by Merz Dental in Lütjenburg.
2
ACRYLICS FOR LIFEPMMA polymethyl methacrylate
Polymethyl methacrylate (PMMA) has become part and parcel of our daily lives, and is one of the high-performance materials used for a variety of purposes. We trust PMMA in many areas of our lives, be it in the home, in technology or in medicine, for example and these are just some of the application areas. PMMA is also used in aviation for airplane windows, in optics for lenses and optical fibres, in joint replacement as a cement for artificial hips, as well as in ophthalmology for artificial lens implants (intraocular lenses). In dentistry and dental technology, PMMA has proven its worth for over 60 years thanks to its superior elasticity and impact strength, as well as its plaque and temperature resistance and stable form.
The dental polymethyl methacrylates developed by Merz Dental and produced using our own procedural technologies are part of the latest and most innovative material generation. Their strength and stability as a medical product is due to exceptionally pure polymers with varying geometries that are adapted to one another and prepared in multiple phases. The same applies with regard to curing the required monomers so that cross-linked macromolecular network structures that are stable in the oral environment, dense and shock absorbent can be achieved when processing prosthetic acrylics. One of the first dental materials to exhibit a cross-linked, and as a result, three-dimensional network structure, was the interpenetrating polymer network (IPN for short). It was developed and launched on the market by Merz Dental in Lütjenburg.
Skillbond Dental technology you can trust
4| Call us today 01494 448474
9
PremEco® LineFurther system components
PremEco® Line set-up waxTemperature-resistant modeling wax for all work processes in thefield of prosthetics with high softening temperature and inconspi-cuous colouring for the wax try-in.
PremEco® Line alginate isolation solutionSuited for processing hot-curing and cold-curing polymers.
PremEco® Line precision gelHighly precise special duplicating gel on a hydrocolloid agar-agarbase for denture casting and the fabrication of model cast frames,easy processing in conventional duplicating devices.
PremEco® Line casting flaskRobust, distortion-free duplicating flask used with the acrylic casting technique to produce partial and full acrylic prosthetics,model cast prosthetics, double-crown and cover denture prosthetics, as well as for all types of bite splints.
Swiss JetAll-in-one flask
The Swiss Jet flask for the injection, injection pressing mouldingand casting method is an all-rounder. The corrosion resistant flasks,which close precisely due to the cone fit and which are designed forthe highest continuous stresses, are easy to handle and do not require any additional installations such as compressed air and aspecial water connection.
C
SMZ087
SMZ088
SMZ089
SMZ090
SMZ091
SMZ092
£4.46
£12.56
£53.96
£67.46
£17.96
£160.11
PremEco Set-Up Wax Rosa 5 95g
PremEco Set-Up Wax Rosa 22 500g
PremEco Set-Up Wax Rosa 120 2268g
PremEco Line Precision Gel 6kg
PremEco Line Alginate Iso Solution 1lt
PremEco Pouring Flask dia 110mm
PremEco® LinePourable denture processing system
SYSTEM COMPONENTS
PremEco® Line set-up waxTemperature-resistant modelling wax for all work processes in the field of prosthetics with high softening temperature and inconspicuous colouring for the wax try-in.
PremEco® Line alginate isolation solutionSuited for processing hot-curing and cold-curing polymers.
PremEco® Line precision gelHighly precise special duplicating gel on a hydrocolloid agar-agar base for denture casting and the fabrication of model cast frames, easy processing in conventional duplicating devices.
PremEco® Line casting flaskRobust, distortion-free duplicating flask used with the acrylic casting technique to produce partial and full acrylic prosthetics, model cast prosthetics, double-crown and cover denture prosthetics, as well as for all types of bite splints.
With acrylics and techniques evolving in Prosthetics the PremEco Line is an innovative system moving with the times. Pourable systems help to create a cleaner working environment for technicians and reduce the working time spent on processing dentures. In recent years the disposal of gypsum has become an increased problem. By using a pourable system the laboratory is reducing its gypsum footprint and becoming more environmentally friendly. Merz Dental are providing a system that is user-friendly with great final results.
Offers
9
PremEco® LineFurther system components
PremEco® Line set-up waxTemperature-resistant modeling wax for all work processes in thefield of prosthetics with high softening temperature and inconspi-cuous colouring for the wax try-in.
PremEco® Line alginate isolation solutionSuited for processing hot-curing and cold-curing polymers.
PremEco® Line precision gelHighly precise special duplicating gel on a hydrocolloid agar-agarbase for denture casting and the fabrication of model cast frames,easy processing in conventional duplicating devices.
PremEco® Line casting flaskRobust, distortion-free duplicating flask used with the acrylic casting technique to produce partial and full acrylic prosthetics,model cast prosthetics, double-crown and cover denture prosthetics, as well as for all types of bite splints.
Swiss JetAll-in-one flask
The Swiss Jet flask for the injection, injection pressing mouldingand casting method is an all-rounder. The corrosion resistant flasks,which close precisely due to the cone fit and which are designed forthe highest continuous stresses, are easy to handle and do not require any additional installations such as compressed air and aspecial water connection.
C
9
PremEco® LineFurther system components
PremEco® Line set-up waxTemperature-resistant modeling wax for all work processes in thefield of prosthetics with high softening temperature and inconspi-cuous colouring for the wax try-in.
PremEco® Line alginate isolation solutionSuited for processing hot-curing and cold-curing polymers.
PremEco® Line precision gelHighly precise special duplicating gel on a hydrocolloid agar-agarbase for denture casting and the fabrication of model cast frames,easy processing in conventional duplicating devices.
PremEco® Line casting flaskRobust, distortion-free duplicating flask used with the acrylic casting technique to produce partial and full acrylic prosthetics,model cast prosthetics, double-crown and cover denture prosthetics, as well as for all types of bite splints.
Swiss JetAll-in-one flask
The Swiss Jet flask for the injection, injection pressing mouldingand casting method is an all-rounder. The corrosion resistant flasks,which close precisely due to the cone fit and which are designed forthe highest continuous stresses, are easy to handle and do not require any additional installations such as compressed air and aspecial water connection.
C
Skillbond Merz Dental 2014
|5 +44(0)1494 448474 | [email protected] | www.skillbond.com
PremEco® LinePOURABLE DENTURE PROCESSING SYSTEM
Option 11 x PremEco line Casting flask 110mm1 x 1kg Weropress Cold cure polymer1 x 1ltr Weropress Cold cure monomer1 x PremEco line Colourisation stains kit1 x PremEco line Monomer 100ml1 x PremEco line wax 120 sheets box1 x PremEco line Alginate solution1 x PremEco line precision gel 6.5kg1 x PremEco line tooth sieve1 x Large Acrylic Mixing Pot 70ml
SPECIAL PRICE £514.00
Option 2As Option 1 with 2 x PremEco line Casting flask 110mm
SPECIAL PRICE £658.00
Option 3As Option 1 with 4 x PremEco line Casting flask 110mm
SPECIAL PRICE £945.00
ALL PRICES EXCLUDE VAT & CARRIAGE SUBJECT TO AVAILABILITY - E & OE. PRICES THROUGHOUT VALID UNTIL 31ST MARCH 2014.
9
PremEco® LineFurther system components
PremEco® Line set-up waxTemperature-resistant modeling wax for all work processes in thefield of prosthetics with high softening temperature and inconspi-cuous colouring for the wax try-in.
PremEco® Line alginate isolation solutionSuited for processing hot-curing and cold-curing polymers.
PremEco® Line precision gelHighly precise special duplicating gel on a hydrocolloid agar-agarbase for denture casting and the fabrication of model cast frames,easy processing in conventional duplicating devices.
PremEco® Line casting flaskRobust, distortion-free duplicating flask used with the acrylic casting technique to produce partial and full acrylic prosthetics,model cast prosthetics, double-crown and cover denture prosthetics, as well as for all types of bite splints.
Swiss JetAll-in-one flask
The Swiss Jet flask for the injection, injection pressing mouldingand casting method is an all-rounder. The corrosion resistant flasks,which close precisely due to the cone fit and which are designed forthe highest continuous stresses, are easy to handle and do not require any additional installations such as compressed air and aspecial water connection.
C
Weropress®
The all-rounder
5
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
FEATURES and BENEFITS■ reliable and simple to measure powder-liquid system
■ suitable for the injection, press and pouring method
■ reliable, colour-stable storage and processing
■ high flexural strength tolerates large undercuts such as maxillarytuber during devesting
■ excellent polishing features
■ superior colour stability
■ colours are coordinated with all Merz Dental denture base materials
■ high plaque-resistance thanks to most modern PMMA-formulation
■ no late discolouring thanks to advanced catalyst system
■ biocompatibility tested
■ cadmium free
COLOURSpinkH-pinkclearL1 - pink veinedC34 - dark pink-opaque, veinedCS41 - pink-bluishpink veined - with red vinyl fibres
COLD-CURING POLYMERS
C
Weropress®
The all-rounder
5
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
FEATURES and BENEFITS■ reliable and simple to measure powder-liquid system
■ suitable for the injection, press and pouring method
■ reliable, colour-stable storage and processing
■ high flexural strength tolerates large undercuts such as maxillarytuber during devesting
■ excellent polishing features
■ superior colour stability
■ colours are coordinated with all Merz Dental denture base materials
■ high plaque-resistance thanks to most modern PMMA-formulation
■ no late discolouring thanks to advanced catalyst system
■ biocompatibility tested
■ cadmium free
COLOURSpinkH-pinkclearL1 - pink veinedC34 - dark pink-opaque, veinedCS41 - pink-bluishpink veined - with red vinyl fibres
COLD-CURING POLYMERS
C
Skillbond Dental technology you can trust
6| email [email protected]
SMZ290
SMZ293
SMZ067
SMZ068
SMZ069
SMZ070
SMZ071
SMZ072
SMZ073
SMZ074
SMZ075
SMZ076
SMZ077
£15.06
£56.83
£15.06
£56.83
£15.06
£56.83
£15.06
Weropress CS41 100g
Weropress CS41 1000g
Weropress Clear 100g
Weropress Clear 1000g
Weropress C34 DPO V 100g
Weropress C34 DPO V 1000g
Weropress L1 - Pink Veined 100g
Weropress L1 - Pink Veined 1000g
Weropress Pink Veined 1000g
Weropress Monomer 100ml
Weropress Monomer 1000ml + cups
Weropress Shade Tab
Weropress Measuring Cups Set
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
Weropress®The all-rounder
Features and benefits• reliable and simple to measure powder-
liquid system
• suitable for the injection, press and pouring method
• reliable, colour-stable storage and processing
• high flexural strength tolerates large undercuts such as maxillary tuber during devesting
• excellent polishing features
• superior colour stability
• colours are coordinated with all Merz Dental denture base materials
• high plaque-resistance thanks to most modern PMMA-formulation
• no late discolouring thanks to advanced catalyst system
• biocompatibility tested
• cadmium free
Colourspink
clear
L1 - pink veined
C34 - dark pink-opaque, veined
pink veined - with red vinyl fibres
CS41 - pink-bluish
Offers
Weropress®
The all-rounder
5
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
FEATURES and BENEFITS■ reliable and simple to measure powder-liquid system
■ suitable for the injection, press and pouring method
■ reliable, colour-stable storage and processing
■ high flexural strength tolerates large undercuts such as maxillarytuber during devesting
■ excellent polishing features
■ superior colour stability
■ colours are coordinated with all Merz Dental denture base materials
■ high plaque-resistance thanks to most modern PMMA-formulation
■ no late discolouring thanks to advanced catalyst system
■ biocompatibility tested
■ cadmium free
COLOURSpinkH-pinkclearL1 - pink veinedC34 - dark pink-opaque, veinedCS41 - pink-bluishpink veined - with red vinyl fibres
COLD-CURING POLYMERS
C
Weropress®
The all-rounder
5
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
FEATURES and BENEFITS■ reliable and simple to measure powder-liquid system
■ suitable for the injection, press and pouring method
■ reliable, colour-stable storage and processing
■ high flexural strength tolerates large undercuts such as maxillarytuber during devesting
■ excellent polishing features
■ superior colour stability
■ colours are coordinated with all Merz Dental denture base materials
■ high plaque-resistance thanks to most modern PMMA-formulation
■ no late discolouring thanks to advanced catalyst system
■ biocompatibility tested
■ cadmium free
COLOURSpinkH-pinkclearL1 - pink veinedC34 - dark pink-opaque, veinedCS41 - pink-bluishpink veined - with red vinyl fibres
COLD-CURING POLYMERS
C
Skillbond Merz Dental 2014
£56.83
£56.83
£13.01
£52.78
|7 +44(0)1494 448474 | [email protected] | www.skillbond.com
SMZ055
SMZ056
SMZ057
SMZ058
SMZ059
SMZ060
SMZ061
SMZ063
SMZ064
£16.20
£101.86
£16.20
£101.86
£11.04
Promolux High Impact L1 - PV 100g
Promolux High Impact L1 - PV 1000g
Promolux Hi Imp C34 - DPO V 100g
Promolux Hi Imp C34 - DPO V 1000g
Promolux High Impact 100ml
Promolux Hi Imp 500ml inc m/cups
Promolux Hi Imp 1000ml inc m/cups
Promolux High Impact Shade Tab
Promolux Hi Imp Measuring Cups Set
Denture base acrylic for partial, full and implant supported prosthetics. Complies with all requirements for High Impact acrylics according to EN ISO 20795-1 type 1 class 1 flask and injection moulding procedures.
Promolux® HIGH IMPACTFor highest demands
Features and benefits• 300% higher impact resistance compared
to conventional heat-curing acrylics
• 200% higher impact strength compared to conventional heat-curing acrylics
• residual monomer < 2%
• cadmium and Phthalate free
• easy handling
• for the injection and pressing technique
• usual application and processing
• easy to polish
• colours co-ordinated with the Merz Dental denture base materials
• colour stable thanks to advanced catalyst system
• high plaque-resistance thanks to most modern PMMA formulation
• biocompatibility tested
• for additions and relines
Colourspink
L1 - pink veined
C34 - dark pink-opaque veined
11
HOT-CURING POLYMERS
Promolux® HIgH IMPACTFor highest demands
Denture base acrylic for partial, full and implant supported prosthetics. Complies with all requirements for High Impact acrylics according to EN ISO 20795-1 type 1 class 1.
FEATURES and BENEFITS■ 300% higher impact resistance compared to conventional
heat-curing acrylics.
■ 200% higher impact strength compared to conventional heat-curing acrylics.
■ residual monomer < 2%
■ cadmium and Phthalate free
■ easy handling
■ for the injection and pressing technique
■ usual application and processing
■ easy to polish
■ colours co-ordinated with the Merz Dental denture base materials.
■ colour stable thanks to advanced catalyst system
■ high plaque-resistance thanks to most modern PMMA-formulation
■ biocompatibility tested
■ for addtions and relines
COLOURSpinkL1 - pink veinedC34 - dark pink-opaque, veined
C11
HOT-CURING POLYMERS
Promolux® HIgH IMPACTFor highest demands
Denture base acrylic for partial, full and implant supported prosthetics. Complies with all requirements for High Impact acrylics according to EN ISO 20795-1 type 1 class 1.
FEATURES and BENEFITS■ 300% higher impact resistance compared to conventional
heat-curing acrylics.
■ 200% higher impact strength compared to conventional heat-curing acrylics.
■ residual monomer < 2%
■ cadmium and Phthalate free
■ easy handling
■ for the injection and pressing technique
■ usual application and processing
■ easy to polish
■ colours co-ordinated with the Merz Dental denture base materials.
■ colour stable thanks to advanced catalyst system
■ high plaque-resistance thanks to most modern PMMA-formulation
■ biocompatibility tested
■ for addtions and relines
COLOURSpinkL1 - pink veinedC34 - dark pink-opaque, veined
C
Skillbond Dental technology you can trust
£27.41
£49.01
Offers
8| www.skillbond.com
ACRYLIC ACCESSORIES TOOTH SIEVEFor effective use of the PremEco® Line range Practical and long lasting
SEU004
SEU005
SEU006
SAS027
£12.99
£20.50
£19.50
£5.66
Small Acrylic Pot 5ml (Pack of 3)
Medium Acrylic Pot 30ml (Pack of 2)
Large Acrylic Pot 70ml (Pack of 1)
Plaster / Acrylic Spatula
SMZ001
SMZ002
SMZ004
£15.36
£15.36
£15.36
Tooth Sieve Red
Tooth Sieve Blue
Tooth Sieve Yellow
Skillbond Merz Dental 2014
Merz Dental Papillameter Merz Dental AlameterFor determining the width of the upper lip The Papillameter is a measuring device used to achieve more accurate and personalised aesthetic results in making dentures and denture-related implant cases. It is designed to take a measurement of the width of your patient’s upper lip. This enables the dental technician simply and accurately to establish the length of the upper anterior teeth for each individual patient.• Easy to use• Accurate lip measurement• Simple aid in determining the length of the anteriors• Time-saving• Autoclavable
For selecting anterior mouldsThe Alameter is a useful tool for evaluating suitable upper anterior moulds, i.e. artegral anteriors.When the nose width is measured, the Alameter calculates the approximate width of the tooth mould, which matches the patient’s physiognomy. The result is a tooth selection that harmonises with the facial appearance of the patient.• Easy to use• Rapid selection of tooth moulds
SMZ307 Alameter & Papillameter £39.28
A tool to organise teeth during the wax boiling-off process. The sieve is jaw shaped, each tooth lies in a separate compartment in corresponding order to the wax set-up. Different cases can be handled at the same time without mix ups thanks to clear colour differentiation.
|9 +44(0)1494 448474 | [email protected] | www.skillbond.com
Set 1 - PremEco® Line Staining Kit Monomer 100ml, Shell, Coral, Anemone, Opal, Topaz, Ruby & Sapphire 1 each x 8gm
SPECIAL PRICE £86.44
• due to chemically homogeneous MMA base, strong bond with PremEco® Line denture cast acrylic
• easy processing due to direct application in the duplicating mould (gel, hydrocolloid or silicone)
• form and colour design
• natural colour effect through layering technique
• extremely easy to polish
• colour-stable
• minimal polymer shrinking
• small variety in order to fulfil the highest esthetic demands
• plaque resistant
• cadmium free
Superb-quality and particularly long-lasting shade characterisation of acrylic prosthetics and saddles comes from within and is thus superior to stains. Based on cold-curing PMMA the Prosthetic Colour System is especially suited for laying the colours. Durability
and colour stability are of benefit in addition to the simple processing. For shade customisation of artificially replicated gingiva, standard and intensive shades are provided that offer a natural appearance and can be mixed together as required.
Features and benefits
SMZ106
SMZ107
SMZ108
SMZ109
SMZ110
SMZ111
SMZ112
SMZ113
Range of applicationIndividual colour characterisation of the artificial gingival and total prostheses
PremEco® LinePROTHETIK COLOR SYSTEM Colour comes from within
ColoursStandard colours Intensive colours
Shell
Coral
Anemone
Opal
Topaz
Ruby
Sapphire
SMZ114
SMZ115
SMZ116
SMZ117
SMZ118
SMZ119
SMZ120
SMZ102
£13.50
£13.50
£13.50
£13.50
£13.50
£13.50
£13.50
£14.48
PremEco Line PCS Refill Shell 8g
PremEco Line PCS Refill Coral 8g
PremEco Line PCS Refill Anemone 8g
PremEco Line PCS Refill Int Opal 8g
PremEco Line PCS Refill Int Topaz 8g
PremEco Line PCS Refill Int Ruby 8g
PremEco PCS Refill Int Sapphire 8g
PremEco Line Monomer 100ml
£71.96
£122.84
£73.59
£73.59
£73.59
£27.00
£27.00
£27.00
PremEco Line Prothetik Col Sys Set 1
PremEco Line Prothetik Col Sys Set 2
PremEco Line PCS Refill Shell 100g
PremEco Line PCS Refill Coral 100g
PremEco PCS Refill Anemone 100g
PremEco Line PCS Refill Shell 35g
PremEco Line PCS Refill Coral 35g
PremEco PCS Refill Anemone 35g
Skillbond Dental technology you can trust
Offers
10| Call us today 01494 448474
PremEco® Line Precision GelAlternative processing methods for customers who do not have a gel melting machine, but would like to work with PremEco® Line Precision Gel
OPTION 1 Using a microwave1. Soak the plaster model with wax set-up in water for
approx 5min.
2. After 5minutes dry the model with air and place the plaster model in the casting flask.
3. Put 350-400g of small cut up PremEco® Line gel pieces with 20ml tap water into a plastic or ceramic bowl.
4. Start to microwave on full power for approx. 3-4min. Make sure the gel does not start to boil. Open the microwave during the melting process several times to stir the contents.
5. Approx 95°C have been reached when the gel froths up. Handle with care and make sure the gel does not overheat!
6. Let the liquefied gel slowly cool down to 49°C by using a thermometer and stirring it constantly for 3min. Place the bowl in to cold water whilst stirring.
7. Pour the gel, which now has reached a temperature of 45-49°C into the casting flask.
8. For the cooling down period place the filled casting flask into a bowl with approx 3cm cold water for approx 45min.
OPTION 2 Using a sauce pan on a heated plate1 - 2. Same procedure as option 1 applies for these steps
3. Heat 350-400g of small cut pieces of PremEco® Line gel with 25 ml tap water in a sauce pan at highest level for 3min. until the gel liquefies. Stir constantly during the melting process. The gel must not boil.
4. Make sure that the gel does not heat up more than 95°C. Always check the temperature of the gel during the heating process by using a thermometer.
5 - 8. Same procedure as option 1 applies for these following steps
IMPORTANT NOTE:Do not store used and new gel in the same container and never mix used and new material during the process. The quality of the material can be affected by contamination (e.g. dirt).
The gel should not be re-heated more than 12 times as the physical characteristics and quality cannot be guaranteed thereafter.
Processing Methods
Promolux High Impact AcrylicThis acrylic can be used for:
• Injection process as specified by manufacturer
• Conventional flasking technique
Dosage and application:
Mixing ratio: 27.5g powder: 11ml liquid
Weropress AcrylicThis acrylic can be used for:
• Pouring method (Casting process)
• Injection process
• Pack and flask (Press process)
Please refer to the information on the Merz Dental website and the instruction of use included with the acrylics depending on the processing method. There are different mixing ratios for different applications.
The product properties are based on compliance with the instructions of use.
|11 +44(0)1494 448474 | [email protected] | www.skillbond.com15
Combitray® CCTray material
Dimensionally-stable tray material that offers flexural strength with ashort dwell time for the fabrication of custom impression trays, baseplates and intraoral registration templates. Does not contain aminesand separates from plaster by itself thanks to a cutting-edge chemicalformulation.
FEATURES and BENEFITS■ short mixing and dwell time■ long processing interval, 4 min■ does not stick to hands and is not oily■ simple and reliable shaping and adaption■ no unpleasant odours, does not contain amines■ can be supplemented with identical material■ easily removed from the model following curing, separates from
plaster models by itself■ high flexural strength, comparable products tolerate an average of
39 MPa, Combitray CC supports 53 Mpa, which corresponds tomaterial strength of approx. 5 kg/mm2
■ low shrinkage, dimensionally stable■ no smearing when cutting and milling
SHADESwhitepink
C
Flexural strength, tray material60
50
40
30
20
10
0
[MP
a]
Commercially-available Commercially-available Commercially-available tray material 1 tray material 2 tray material 3
COMBITRAY® CC
2628
40
53
Average flexural strength (commercially-available tray materials)
Combitray CC®Tray material
Dimensionally-stable tray material that offers flexural strength with a short dwell time for the fabrication of custom impression trays, base plates and intra oral registration templates. Does not contain amines and separates from plaster by itself thanks to a cutting-edge chemical formulation.
FEATURES and BENEFITS• short mixing and dwell time
• long processing interval, 4 min
• does not stick to hands and is not oily
• simple and reliable shaping and adaptation
• no unpleasant odours, does not contain amines
• can be supplemented with identical material
• easily removed from the model following curing, separates from plaster models by itself
• high flexural strength, comparable products tolerate an average of 39 MPa, Combitray CC supports 53 MPa, which corresponds to material strength of approx 5kg/mm2
• low shrinkage, dimensionally stable
• no smearing when cutting and milling
SHADESWhite
Pink
£51.30
£16.20
£51.30
£16.20
£10.80
£17.10
SMZ079
SMZ078
SMZ081
SMZ080
SMZ082
SMZ083
Combitray® CC Pink 1250g
Combitray® CC Pink 125g
Combitray® CC White 1250g
Combitray® CC White 125g
Combitray® CC Liquid 50ml
Combitray® CC Liquid 500ml
Offers
12|
The next generation artegral is the adaption to contemporary needs with added value for the modern user. Aesthetic and function of matured kind. In constructive dialogue with users, the artegral anterior was designed closest to nature, new moulds developed leaving prosthetics newly interpreted.
The PosteriorContemporary removable prosthetics require intelligent materials. They should resist abrasion, without provoking potentially damaging hyperbalances and their consequences. On the other hand, they must be fracture-proof to guarantee a long wearing life in tertiary structures.
• Fully anatomical, cusp angle 25°
• Full bodied like a natural tooth
• Clear centric for natural and artificial antagonists
• Time-saving handling: basal shaped, integrated set-up aid Preventive Shift Groove® (PSG®)
SizesAll upper and lower posteriors made of OMP-N® and HMP-N® are available in five sizes:
XL = extra large, L = large, M = medium, S = small & XS = extra small
ShadesAvailable in all 16 Classic Vita Shades A1 – D4 and BL1 – BL4
email [email protected]
The Anterior• new, additional anterior moulds: BO, BI and IT
• perfect light-refraction
• life-like layers
• 19 upper and 10 lower anterior moulds
• ideal for hybrid and implant constructions as well as for full and partial prosthetics
• plaque-resistant, made of Organic Modified Polymer-Network (OMP-N®)
• Perfect light refraction
• Lively looking layers
• Ideal for hybrid and implant constructions
• Plaque resistant, made of Organic Modified Polymer-Network® (OMP-N®)
The CBI®-SystemThe artegral® moulds continue the innovative and function-orientated standard of the efficient CBI®-System.
C-mould = cervical emphasized - striking, firm, masculine
B-mould = body emphasized - harmonious, neutral
BI-mould = body-incisal emphasized
BO-mould = body-oval emphasized
I-mould = incisal emphasized – grace, elegance, feminine
IT-mould = incisal-triangular emphasized
All upper and lower anteriors C, B and I are offered in three or more sizes.
S = small, M = medium & L = large
Anterior & Posterior Teeth
Anterior Sets
RRP £15.76 Posterior Sets
RRP £14.23
|13 +44(0)1494 448474 | [email protected] | www.skillbond.com
A-D Shade Guide Highlights Time-Proven A-D ShadesShade communication between dentists and dental technicians is eminently important. Only a reliable and well-proven shade guide can be successfully used for this important function.
Millions of dentists and dental laboratories all over the world have opted for the shade guide with the classical shades designated A1 to D4 in recent years. And many manufacturers of veneering ceramics, composites, denture teeth, but also restorative materials have followed the market and introduced this user-friendly shade standard for their products.
This development offers many advantages for dentists and laboratories alike, for example, the freedom to use materials offered different manufacturers rather than being restricted to a single one.
In order to preserve this standard and to keep it independent, DeguDent, Heraeus Kulzer, Ivoclar Vivadent, Merz Dental and Wieland Dental + Technik decided to join forces in providing standardized shade guides for dentists and dental technicians.
Their A-D Shade Guide Workgroup, which is open to all dental manufacturers, has the aim to promote an established and generally recognized shade standard to ensure that dental professionals can meet their treatment objectives reliably and - by implication - more economically. This reliable common standard will be implemented consistently in the product portfolios offered by all member companies.
In addition to the well-known 16 standard shades of the A-D Shade guide, it features four optional new bleach shades (BL1–BL4) available on a separate shade guide module.
The new A-D Shade Guide will enable dentists and dental technicians to continue working with the familiar A to D shades and the four new bleach shades: consistently, reliably and with excellent shade fidelity.
Made of Organic Modified Polymer-Network (OMP-N®) and Highly Modified Polymer-Network (HMP-N®) for the combination and hybrid prosthetics
Anterior & Posterior Teeth
arte
gral
®
DER SEITENZAHNn Vollanatomisch, Höckerneigung 25°n Körperhaft wie ein natürlicher Zahnn Eindeutige Zentrik für natürliche und künstliche
Antagonistenn Zeitsparendes Handling: basale Form, integrierte
Aufstellhilfe, Preventive Shift Groove® (PSG®)n Auch aus Highly Modified Polymer-Network®
(HMP-N®) für die Kombi- und Hybrid-Prothetik
THE POSTERIORn Fully anatomical, cusp angle 25°n Full bodied like a natural toothn Clear centric for natural and artificial antagonistsn Time-saving handling: basal shaped, integrated
set-up aid Preventive Shift Groove® (PSG®)n Also in Highly Modified Polymer-Network®
(HMP-N®) for partial, complete and hybrid denture prosthetics
DENTE POSTERIOREn Anatomico, inclinazione delle cuspidi 25°n Funzionalità naturalen Relazione di centrica univoca per antogonisti
naturali o artificialin Risparmio di tempo: forma o profilo basale, ausilio
di posizionamento sagittale integrato, Preventive Shift Groove® (PSG®)
n Composto da Highly Modified Polymer-Network®
(HMP-N®) per protesi combinata e protesi ibrida
POSTERIORn Anatómico, inclinación cuspídea 25°n Formas dentales naturales, según el cuerpon Posición céntrica clara para los antagonistas
artificiales y naturalesn Ahorro de tiempo en el manejo: forma basal, auxilar
basal integrado, Preventive Shift Groove® (PSG®)n También de Highly Modified Polymer-Network®
(HMP-N®)
POSTERIEURn Anatomique, inclinaison des cuspides 25°n Corporelle comme une dent naturellen Centrique évidente pour antagonistes naturels
et artificielsn Handling rapide : forme basale, aide au montage
sagittal intégré, Rainure basale brevetée, Preventive Shift Groove® (PSG®)
n Egalement de Highly Modified Polymer-Network®
(HMP-N®)
MZSGBAS
MZSGBASBL
MZSGBLE
£33.20
£46.20
£15.40
A-D Shade guide Basic
A-D Shade guide Basic + Bleach
Shade guide BL1-BL4
14| www.skillbond.com
The Modern Art of Teeth Polystar® Selection is a harmonious synthesis between sophisticated esthetics, modern shapes and the natural occlusal concept - The Modern Art of Teeth.This posterior tooth is an alternative option with a reduced cusp angle that works well with the artegral anterior teeth.
The Polystar® Selection tooth convinces with its exceptional colouring, which gives it a brilliant and individual look. Based on a well-arranged variety of shapes, a solution can be found for every prosthetic case.
Polystar® Selection posteriors with their occlusal surface are modelled on the adult tooth and can be set up within a short time. The preventive sliding groove PSG® prevents rotative and tipping movements of the tooth, especially in cases when hard modern modelling waxes are being used. The spherical approximal contact surfaces offer a firm sagittal point of orientation in the process of trial fitting. Convex occlusal ridges provide a high shearing capability for the patient.
The Polystar® Selection tooth is a universal tooth that was developed at high quality standards. Made of OMP-N® (Organic Polymer Modified-Network), the level of cross-linking is identical to the integral® tooth line and guarantees one of the highest abrasive densities that unfilled artificial teeth have reached until now.
Range of application:• combined fixed-removable dental prostheses
• implant-supported dental prostheses (secondary construction)
• model cast prostheses
• total prosthetics
• partial dentures
• immediate and temporary dentures
ShadesAvailable in all classic 16 V-shades A1 – D4 & BL1 – BL4
Material and advantages• highly networked quality tooth made of Organic
Modified Polymer-Network (OMP-N®)
• temperature-resistant and kind to tissue
• chemically and colour-stable
• very easy to process and to polish
• abrasion-resistant OMP-N® resin
• Semi-anatomical, cusp angle 15°
• Four-layer set-up
• Defined centric occlusion by tripodizing
• Design modelled on the adult tooth, minor grinding-in due to integrated medium-grade movement paths
• Dimensioned like a natural posterior
• Effective variety with upper and lower posterior moulds in four sizes each
• Time-saving set-up due to sagittal set-up aid
• Shift groove with pending patent, Preventive Shift Groove® (PSG), prevents rotating and tilting movements of the tooth during wax set-up
• Works in all conventional occlusal concepts
• Identical shape and size of the left and the right posteriors by means of CAD/CAM technology
Posterior Teeth
Posterior Sets RRP £12.44
|15 +44(0)1494 448474 | [email protected] | www.skillbond.com
SAVE TIMENo time consuming layering. Choose from the artVeneer range which is colourstable up to 0.5mm.The incisal back protection supports incisor guidance and at the same time assists with shaping and modelling, while providing an aesthetic reserve, especially beneficial when working close to metal margins.In the artVeneer posteriors the occlusal adjustment and support at the partially edentulous arch is quick and efficient with the large occlusal opening angle as with the artegral posteriors.
COMBINATIONSartVeneer® & artegral® tooth linesThe digital manufacturing process of the artVeneers and the artegral tooth line allows perfect combination of the veneers and the artegral teeth, ie. 1:1.
THE RESULTHarmonious function and aesthetics with the natural single-tooth appearance, particularly with combined fixed and removable dentures. It allows backward planning for an aesthetic set up, especially beneficial for conventional techniques.
artVeneer® 16 V-Classic shades A1-D4 + BL1-BL4
MATERIAL ADVANTAGES OF SYSTEM COMPONENTS
• PMMA-based artVeneers and artDentine compounds guarantee homogeneity and plaque resistance
• The highly-crosslinked macromolecules on nano level form a dense, durable network
• The filler and fibre-free Organic Modified Polymer Network (OMP-N®) is abrasion-resistant and tissue-friendly
• The high flexural strength of more than 90 MPa
and the high elasticity are particularly resistant to deformation stresses of the artVeneer in cast dentures and combined dentures
• PMMA acts as a shock-absorber, it is colour-stable and has a natural fluorescence and colour effect
• Outstanding polishability
• Chemical bonding between PMMA-based artConcept components and all conventional base acrylics
Anterior Sets RRP £14.84Posterior Sets RRP £19.80
Veneering System
artVeneer®
artDentineartOpaqueartPrimeartConnect
VENEER AESTHETICS
artConcept®
artConcept_Broschuere_EN_Neu_Veneer_Folder 23.02.12 10:38 Seite 1
16| Call us today 01494 448474
VENEERING IN SECONDS WITH FULLY ANATOMICAL SINGLE-TOOTH CHARACTERISTICS
SAVE TIME WITH NO LIMITS IN FUNCTIONartVeneers offer a wide range of solutions at a high aesthetic level. Supplemented by a range of tooth-coloured PMMA acrylics and matching opaquers, primers and bonding agents, the artConcept product range meets all contemporary requirements for durability, plaque resistance, and high strength combined with elasticity, which is particularly important for combined dentures such as telescopic prosthetics.
artVeneer/artConcept OPTION 1artegral teeth/artVeneers/artConcept cabinet • Tooth cabinet 5 drawers ( with 2 shades artegral teeth upper/lower ant/post
and artVeneer upper/lower ant/post to be selected by the customer) • 15 sets of artegral anteriors shade 1• 6 sets of artegral posteriors shade 1• 15 sets of artVeneer anteriors shade 1• 6 sets of artVeneer posteriors shade 1• 15 sets of artegral anteriors shade 2 • 6 sets of artegral posteriors shade 2• 15 sets of artVeneer anteriors shade 2• 6 sets of artVeneer posteriors shade 2• 1 x 35g artDentine powder (shade accord. to shade 1)• 1 x 35g artDentine powder (shade accord. to shade 2)• 1 x 100ml artDentine monomer• 1 x 50ml artConnect• 1 x 5ml artPrime• 1 x 3g artOpaque (shade accord. to shade 1)• 1 x 3g artOpaque (shade accord. to shade 2)• 1 x 3g artOpaque Gum light (with build-in primer)• 1 x 35g artVeneer wax• 1 x pack of brushes (10)• 1 x brush tip holder• 1 x short brush• 1 x mixing trays pack of 10• 1 x applications syringe
£1,779.00
Skillbond Merz Dental 2014
|17 +44(0)1494 448474 | [email protected] | www.skillbond.com
RANGE OF APPLICATION• Telescopic and conical crowns
• Attachment constructions
• Bar constructions
• Implant constructions
• Model-cast constructions
• Overdentures
• Partial and full dentures
• Aesthetic try-ins
• Laboratory-fabricated temporaries
artVeneer/artConcept OPTION 2artVeneer Show Case• artVeneer show case (living mould guide with 1
selected shade)
• 15 sets of artVeneer anteriors
• 6 sets of artVeneer posteriors
• 1 x 35g artDentine powder (shade accord. to shade 1)
• 1 x 100ml artDentine monomer
• 1 x 50ml artConnect
• 1 x 5ml artPrime
• 1 x 3g artOpaque (shade accord. to shade 1)
£495.00
artVeneer/artConcept OPTION 3artVeneer Show Case• artVeneer show case (living mould guide with 1
selected shade)
• 29 sets of artVeneer anteriors
• 10 sets of artVeneer posteriors
• 1 x 35g artDentine powder (shade accord. to shade 1)
• 1 x 100ml artDentine monomer
• 1 x 50ml artConnect
• 1 x 5ml artPrime
• 1 x 3g artOpaque (shade accord. to shade 1)
£890.00
artVeneer/artConcept Intro Kits in one selected shade of A2, A3, A3.5 comprises of • 1 set of artVeneer upper anteriors
• 1 set of artVeneer upper posteriors
• 1 x 35g artDentine powder (shade accord. to shade 1)
• 1 x 50ml artDentine monomer
• 1 x 7ml artConnect
• 1 x 3ml artPrime
• 1 x 3g artOpaque (shade accord. to shade 1)
Skillbond Dental technology you can trust
SMZ008
SMZ009
SMZ010
£143.00
£143.00
£143.00
Intro Kit A2
Intro Kit A3
Intro Kit A3.5
18| email [email protected]
SMZ015
SMZ016
SMZ017
SMZ018
SMZ019
SMZ020
SMZ021
SMZ022
SMZ023
SMZ024
SMZ040
SMZ042
SMZ043
SMZ046
SMZ041
SMZ025
SMZ026
SMZ027
SMZ028
SMZ029
SMZ030
SMZ031
SMZ032
SMZ033
SMZ034
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£41.36
£14.36
£18.29
£18.29
£80.55
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
£29.25
artDentine Polymer 35g A1
artDentine Polymer 35g A2
artDentine Polymer 35g A3
artDentine Polymer 35g A3.5
artDentine Polymer 35g A4
artDentine Polymer 35g B1
artDentine Polymer 35g B2
artDentine Polymer 35g B3
artDentine Polymer 35g B4
artDentine Polymer 35g C1
artDentine Monomer 100ml
artConnect 50ml
artOpaque 3g O1 (A2, B1, B2, B3, C2, C3, D2, D3, BL1, BL2)
artOpaque 3g Cervical
artPrime 5ml
artDentine Polymer 35g C2
artDentine Polymer 35g C3
artDentine Polymer 35g C4
artDentine Polymer 35g D2
artDentine Polymer 35g D3
artDentine Polymer 35g D4
artDentine Polymer 35g BL1
artDentine Polymer 35g BL2
artDentine Polymer 35g BL3
artDentine Polymer 35g BL4
artDentineCold-curing PMMA acrylic (powder and liquid) in all 16 V-Classic and 4 bleach shades
Enamel shades are also available. For more information please contact us
artConnectAdhesive for bonding dental acrylics to PMMA veneers
artOpaqueLight-curing opaquer to cover metal frameworks
artPrimeAdhesive for bonding dental opaquer to metal
artDentine Monomer
SMZ049
SMZ050
SMZ051
SMZ052
SMZ053
SMZ054
£6.07
£3.51
£2.25
£5.04
£4.49
£1.44
artVeneer WAX 35g
Pack of brushes (10)
Brush tip holder (1)
Short brush (1)
Mixing trays (6)
Application syringe (1)
artVeneer® WAXFixation wax for artVeneer
Sundries
SMZ047
SMZ048
£49.35
£49.35
artOpaque GUM 3g light
artOpaque GUM 3g dark
artOpaque GUMPaste opaquer with integrated primer
SMZ044£18.29
artOpaque 3g O2 (A3, A4, B4, C4, D4)
SMZ045£18.29
artOpaque 3g O3 (A1, A3.5, C1, BL3, BL4)
Skillbond Merz Dental 2014
|19 +44(0)1494 448474 | [email protected] | www.skillbond.com
Preparation Tips
artVeneer®
artDentineartOpaqueartPrimeartConnect
VENEER AESTHETICS
artConcept®
artConcept_Broschuere_EN_Neu_Veneer_Folder 23.02.12 10:38 Seite 1
1000s OF
PRODUCTS
ALWAYS IN
STOCK!!!
The Valley Centre Gordon Road High Wycombe Bucks HP13 6EQ UK
Tel +44 (0)1494 448474Fax +44 (0)1494 430924
PROSTHETICACRYLICS
Quality made in Germany
TRAINING COURSE OPTIONS
Full TIF Denture Set-Up Course Germany/UK
Hands-On PremEco Line Pourable Acrylic & Characterisation
with Roy Davies – Oakview Dental Lab, Saunderton, Bucks
Hands-On artVeneer/artConcept Veneering System with Chris Parkman – Wessex Dental Lab, Poole, Dorset
Please call 01494 448474 to book your place…