Megatech ELECTRICAL/ELECTRONIC SYSTEMS principles of electricity and electronics. ... CAN bus System...
Transcript of Megatech ELECTRICAL/ELECTRONIC SYSTEMS principles of electricity and electronics. ... CAN bus System...
ELECTRICAL/ELECTRONIC SYSTEMS
Locktronics Electricity/Electronic Trainer Model: MEG-LOC70 & MEG-LOC
Introduction to
Motors and Generators
(MEGLOC-7444)
The Locktronics system consists of electronic components mounted underneath tough molded polystyrene carriers
with the appropriate circuit symbol displayed on the upper surface of each carrier and the component mounted se
curely beneath it. Circuits are assembled by inserting the component carriers between the metal baseboard pillars
which act as connectors. The final uncluttered layout clearly resembles the theoretical circuit diagram where each
component is displayed/ accessible over the board. This "active schematic" kit allows students to gain a foundation in
the principles of electricity and electronics. It provides hands-on working knowledge of voltage, current, and resis
tance with series and parallel circuits. Graphic symbols are screened onto each components acrylic background. A
very affordable unit. Other kits available:
Electricity, magnetism
and materials solution
(MEGLOC-9071)
Sensors and control in
automotive applications
(MEGLOC-9834}
CAN bus System & Operation Trainer Model: MEG-CANbus
This kit is a fully functioning CAN bus system, mimicking ve
hicle operation by using 4 MIAC Electronics Control Units
representing Instrument panel, Front ECU, Powertrain con
trol, and Rear ECU. A fifth MIAC is used for system diagno
sis, releasing faults and viewing CAN bus messages. Stu
dents are tasked with setting up a fully working CAN bus
system, inserting faults and using hardware and software
tools to understand fault diagnosis procedures and practice.
The solution includes component carriers, base board, a
power supply, and storage trays and is supplied with a full
curriculum pack including teacher's notes.
•
AC Principles for Automotive
Technicians solution
(MEGLOC-8222)
Indicative Picture for Reference Only
(Available w/ Engineering Panel: MEGCANbus-EP)
Training Programs for NATEF Certification • 800-767-MEGA • www.megatechcorp.com (O)��I
Megatech
ELECTRICAL/ELECTRONIC SYSTEMS CLASSIC SERIES TRAINERS
Each trainer is made from live components, mounted on a Mylar (erasable) surface, with heavy t-molded trim and are
predrilled for steel wall mount brackets (optional) for classroom security. Each board can keep 2-3 students active doing
hands on skill development. The courseware is competency based including; information sheets, instruction sheets, stu
dent self-check, instructor's final checklist, and check out activities.
MEG80101
Instrument Panel
MEG80102
Distributorless Ignition
MEG80103
Electronic Ignition
MEG80104
Alternator System
MEG80105
Starter System
-i
MEG80109
Power Door Lock
MEG80106
Directional/Hazard
MEG80110
Power Window
MEG80113
Blower Motor
MEG80107
Lighting System
MEG80111
Radio System
MEG80114
Cooling System
-
MEG80115
Power Seat
MEG80108
Horn/Alarm
MEG80112
Wiper/Washer
(O}:::':b I Training Programs for NATEF Certification • 800-767-MEGA • www.megatechcorp.com
ELECTRICAL/ELECTRONIC SYSTEMS SERIES 2000 TRAINERS
The series 2000 is derived from Megatech's surface mounted panel trainers with the addition of computerized fault in
sertion and classroom management software that can be added optionally. The system uses a fault box that is manually
or computer controlled to set challenges for students to diagnose and fix. Each trainer can keep 2-3 students on task
learning hands-on automotive skills. (Requires Fault Network Device: MEG701514 or manual switches available)
MEG801012M
Instrument Panel
MEG801022M
Distributorless Ignition
MEG801032M
Electronic Ignition
MEG801042M
Alternator System
MEG801052M
Starter System
MEG801062M
Directional/Hazard
MEG801072M
lighting System
MEG801082M
Horn/Alarm
MEG801092M
Power Door Lock
MEG801102M
Power Window
MEG801112M
Radio System MEG801122M
Wiper/Washer
MEG801132M
Blower Motor
MEG801142M
Cooling Fan
MEG801152M
Power Seat
Training Programs for NATEF Certification • 800-767-MEGA • www.megatechcorp.com
ELECTRICAL/ELECTRONIC SYSTEMS
II =.,Li\�
GM SET Model: MEG-GMSET
• GM Specialized Electronics
training course
• Actual GM components
. 1-1 ·--
. l!l
. 1-1 • •U.K
:�
• Stage 1, 2, and 3 GM curriculum
• Separate tip jacks for DC, AC,
and fixed 5 and 12 VDC power
• Silk screen schematic symbol of
the component
Automotive Electro Trainer Model: MEGLECTRO/MEGLECTR0-2
• Students gain a foundation in the
principles of electricity & electronics
• Provides "hands on" working knowl
edge of voltage, current and resis
tance w/ series & parallel circuits
• MEGLECTRO-2 includes faults deliv
ered via toggle switch
• Built in switchable power supply
FACTORY TRAINERS
SUBARU.
Automotive Electro Trainer Model: MEGLECTRO-S
• Designed for Subaru of America
training centers
• Provides "hands on" working knowl
edge of voltage, current and resis
tance w/ series & parallel circuits
• (10) Modules w/ Baseboard
• Curriculum Included
Toyota Electrical Program Model: MEG-623T
• Basic electricity trainer used in
Toyota T-10 training programs
• Follows 622 & 623 courses
• Actual Toyota Parts
• Foundation in the basic principles
of electricity and electronics
• OEM curriculum
Automotive Electro Trainer w/ STEM Concepts Model: MEGLECTRO-STEM
• Includes all features of MEGLECTRO-2
• Built in switchable power supply
• Faults delivered via toggle switch
• Components used for building cir
cuits are permanently mounted to
the acrylic top
• All components have test points
between the banana jack and the
STEM CONCEPTS APPLIED!!
• Discovering Hybrid Modes of
Operation
• Thermistors
• Cadium Sulfide LDRs
• PN Junction/LED
• Series Connected LEDs
• Pulse Width Modulation
component • Zener Diodes & MOSFET
CG}::'�I Training Programs for NATEF Certification • 800-767-MEGA • www.megatechcorp.com
ELECTRICAL/ELECTRONIC SYSTEMS
Basic Electrical Modules/ Advanced Electronic Systems Model: MEGFORD-EE / MEGFORD-ET
Megatech designed and built these modules used by Ford Motor Company worldwide at their factory, Ford ASSET and
Ford MLR Training Centers. The program is packaged for a minimum 9 students and covers basic electrical concepts
using individual boards containing actual working automotive components to build different circuits. These flame pol
ished Plexiglas boards are silk screened with tip jacks and numbers to make building circuits easier.
Ji"-nl).'(. I. , I, 11-f U�'f
FE-4
MEGFORD-EE: Basic Electrical Modules {Includes 20+ modules, call for a complete list)
__ n-u
---
MEGFORD-ET: Basic Electronic Modules {Includes 15 modules, call for a complete list)
This specialized program is divided into two categories: basic electricity program which allows the student to transfer
fundamental theory lessons into real work skills, and a basic electronic course that includes solid state components
that generate different signals. Collectively, these two terrific programs provide a solid foundation from which anyone
serious about obtaining marketable skills in the constantly changing automotive world can learn.
Air Bag Trainer, Redeployable (S.R.S) Model: MEG-80115
With the Megatech (S.R.S.) Air Bag Trainer, the student
can learn the operation, testing and troubleshooting of
an actual operating deployable air bag . Because of the
dangers involved with automotive live air bags, it is im
portant that the student have the necessary knowledge
and skills to practice with the Megatech trainer. A bank
of switches can provide fault insertions and have the stu
dent do the diagnostics. The impact sensors, the wiring
diagram and other components are based on Toyota
parts.
Training Programs for NATEF Certification • 800-767-MEGA • www.megatechcorp.com