mediCAD Web More Highlights mediCAD · 2019-09-11 · New v sion iCAD ® 6 • Multi ... •...
Transcript of mediCAD Web More Highlights mediCAD · 2019-09-11 · New v sion iCAD ® 6 • Multi ... •...
• ®®®
210 mm
mediCAD Hectec GmbHOpalstr. 54 | DE-84032 Altdorf / Landshut / Germany | Phone +49 871 330 203-0 | [email protected]
Prin
t no.
803
/ 09
-201
9 - A
ll rig
hts r
eser
ved
www.mediCAD.eumediCAD® Web is available as a stand-alone product or through direct integration via Siemens teamplay.
Shoulder 3D• Supported image formats: : CT, Low Dose CT, CBCT, MRI• Automatic landmark detection• Removal of metallic structures:
e.g. implants and screws• Artifact reduction in images displaying implants
Especially for corrective planning• Automatic humerus segmentation
Spine 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI and X-Ray• Automatic MRT and CT segmentation• Quick and easy planning of the sagittal balance• First module in mediCAD®OR
For interoperative monitoring of preoperative planning
Flexibility
mediCAD® Web offers maximum flexibility. As a web application, you can access the planning software
when and where you want. Log in from your tablet or any other device via an internet browser to start
working.
Efficiency
Due to the reduced workflow, which has been deliberately simplified and limited to the essential com-
ponents, as well as our support, planning can be carried out with the greatest possible efficiency.
Clarity
The mediCAD® Web user interface is simple, modern and easy to understand. An intuitive planning
process ensures that the software is easy to use.
Cost savings
Central user administration and simple administration via the server helps to save costs. Cumbersome
client setup and virtualization is no longer required.
Audit-compliance
mediCAD® Web is certified as a medical device and fulfills all requirements for saving the planning in
the hospital systems in an audit-proof manner. Together with the qualified training courses conducted
by mediCAD Hectec GmbH, the software guarantees users audit-compliance.
5 points in favor of mediCAD® Web
and other highlights
ServiceQualityFuture
mediCAD® 3D mediCAD® 6More Highlights
Knee 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI, X-Ray• Automatic landmark detection• Removal of metallic structures
e.g. implants, screws (artifacts) and a hide function for bones/implants• Automatically provides information on the rotation of the femoral
component in relation to the transepicondylar axis and the posterior condyle tangential
• Measurement of postoperative rotation • Configurable planning wizard
(TKA and hybrid planning)• Simple size determination without leg axis measurements• Femoral / tibial torsion measurement• Posterior tibial slope measurement
Knee 3D Sport• Patellofemoral measurements
TT-TG distance, TT-PCL, sulcus angle, trochlear depth, femoral and tibial torsion (according to Waidelich, Schneider and Jend), Trochlea classification (according to Dejour)
• Corrective osteotomy• Leg axis measurement
HTO and DFO planning, double-level osteotomies, derotations, tibial posterior slope measurements
License for mixed operation with mediCAD® 6mediCAD® Web
www.mediCAD.eu www.mediCAD.eu
Hip• Hip Autoplan
with automated landmark detection and wizard function
• Pediatrics New measurements:
- Southwick angle - Metaphyseal-diaphyseal angle - Tibiofemoral angle - Epiphyseal index - ACE angle - Acetabular index
Trauma 2D• Plate bending
Customize the plates to fit the anatomy• New measuring methods - Roof arc angle
- Diaphyseal fracture angle measurement - Metaphyseal fracture angle measurement
Hip 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI• Automatic landmark detection• Removal of metallic structures,
e.g. implants and screws.• Ideal support for corrective planning
- Artifact reduction - Configurable wizard function - Automatic femoral shaft size recognition - Automatic recommendation function for cup size (based on CJC) - ROM function with color system - Automatic femur segmentation
C U S T O M I Z E DI M P L A N T S
Knee• Knee Autoplan
with automated landmark detection and wizard function
Long Leg• Osteotomy Autoplan
with automated landmark detection and wizard function
• Torsion Measurement - New TT-PCL measurement - Femoral and tibial torsion (according to Waidlich) - MRI compatible Customized Implants
Query Client 3.0• New user administration / group administration. • MPL file import• Secure password assignment, with separate password
(encrypted) for the system administrator • Optimized database administration• Automatic deletion of database caches and
MPL files after a defined amount of time• Share plannings in organisation• Simple client installation using MSI (Microsoft Window Installer)• DICOM: Configuration of query character sets • Individual configuration of output modality • Removal of specific DICOM-tags from Export • Import from PACS can be activated/deactivated• Auto Query / auto search function• New modern design
3 D P R I N T I N G
3D Printing
• Direct integration in mediCAD® 6• Fast transfer of planning data.• Synchronization for clinic and implant manufacturers.• Planning of individual prostheses using the DICOM dataset sent
by the customer.• Provision of the planning software mediCAD® 3D and the
appropriate interface for your design software.
Integrated in mediCAD® 6
mediCAD®Services
mediCAD® Services is an independent portal that offers access to our services.
services.mediCAD.cloud
Create 3D models of anatomical regions and print them in 3D. The prints can be ordered out of mediCAD® planning software and are available in two different materials. Benefit from a real preoperative view of operating regions.
New version mediCAD® 6
• Multi-window support• Direct connection to mediCAD® Services• Dark mode / bright mode• Layer function- create different plans• Mixed licensing: mediCAD® Classic and mediCAD® Web
use same license.• Guaranteed MDR conformity until 2020• Updated data protection and data security guidelines• New and improved video tutorials explaining the functions• Several bug fixes in all functions / modules
S E R V I C E S
New platform for sharing information related to arthroplasty• Encyclopedia• Knowledge from experts• Practical knowledge• Publishing platform for studies and reference reports
www.endo-base.com
www.mediCAD.eu www.mediCAD.eu
The mediQR PACS interface was replaced as of July 1, 2019 by the Query Client
Further highlights and technical improvements concerning your security of investment:
Integrated in mediCAD® 6
Hip• Hip Autoplan
with automated landmark detection and wizard function
• Pediatrics New measurements:
- Southwick angle - Metaphyseal-diaphyseal angle - Tibiofemoral angle - Epiphyseal index - ACE angle - Acetabular index
Trauma 2D• Plate bending
Customize the plates to fit the anatomy• New measuring methods - Roof arc angle
- Diaphyseal fracture angle measurement - Metaphyseal fracture angle measurement
Hip 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI• Automatic landmark detection• Removal of metallic structures,
e.g. implants and screws.• Ideal support for corrective planning
- Artifact reduction - Configurable wizard function - Automatic femoral shaft size recognition - Automatic recommendation function for cup size (based on CJC) - ROM function with color system - Automatic femur segmentation
C U S T O M I Z E DI M P L A N T S
Knee• Knee Autoplan
with automated landmark detection and wizard function
Long Leg• Osteotomy Autoplan
with automated landmark detection and wizard function
• Torsion Measurement - New TT-PCL measurement - Femoral and tibial torsion (according to Waidlich) - MRI compatible Customized Implants
Query Client 3.0• New user administration / group administration. • MPL file import• Secure password assignment, with separate password
(encrypted) for the system administrator • Optimized database administration• Automatic deletion of database caches and
MPL files after a defined amount of time• Share plannings in organisation• Simple client installation using MSI (Microsoft Window Installer)• DICOM: Configuration of query character sets • Individual configuration of output modality • Removal of specific DICOM-tags from Export • Import from PACS can be activated/deactivated• Auto Query / auto search function• New modern design
3 D P R I N T I N G
3D Printing
• Direct integration in mediCAD® 6• Fast transfer of planning data.• Synchronization for clinic and implant manufacturers.• Planning of individual prostheses using the DICOM dataset sent
by the customer.• Provision of the planning software mediCAD® 3D and the
appropriate interface for your design software.
Integrated in mediCAD® 6
mediCAD®Services
mediCAD® Services is an independent portal that offers access to our services.
services.mediCAD.cloud
Create 3D models of anatomical regions and print them in 3D. The prints can be ordered out of mediCAD® planning software and are available in two different materials. Benefit from a real preoperative view of operating regions.
New version mediCAD® 6
• Multi-window support• Direct connection to mediCAD® Services• Dark mode / bright mode• Layer function- create different plans• Mixed licensing: mediCAD® Classic and mediCAD® Web
use same license.• Guaranteed MDR conformity until 2020• Updated data protection and data security guidelines• New and improved video tutorials explaining the functions• Several bug fixes in all functions / modules
S E R V I C E S
New platform for sharing information related to arthroplasty• Encyclopedia• Knowledge from experts• Practical knowledge• Publishing platform for studies and reference reports
www.endo-base.com
www.mediCAD.eu www.mediCAD.eu
The mediQR PACS interface was replaced as of July 1, 2019 by the Query Client
Further highlights and technical improvements concerning your security of investment:
Integrated in mediCAD® 6
Hip• Hip Autoplan
with automated landmark detection and wizard function
• Pediatrics New measurements:
- Southwick angle - Metaphyseal-diaphyseal angle - Tibiofemoral angle - Epiphyseal index - ACE angle - Acetabular index
Trauma 2D• Plate bending
Customize the plates to fit the anatomy• New measuring methods - Roof arc angle
- Diaphyseal fracture angle measurement - Metaphyseal fracture angle measurement
Hip 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI• Automatic landmark detection• Removal of metallic structures,
e.g. implants and screws.• Ideal support for corrective planning
- Artifact reduction - Configurable wizard function - Automatic femoral shaft size recognition - Automatic recommendation function for cup size (based on CJC) - ROM function with color system - Automatic femur segmentation
C U S T O M I Z E DI M P L A N T S
Knee• Knee Autoplan
with automated landmark detection and wizard function
Long Leg• Osteotomy Autoplan
with automated landmark detection and wizard function
• Torsion Measurement - New TT-PCL measurement - Femoral and tibial torsion (according to Waidlich) - MRI compatible Customized Implants
Query Client 3.0• New user administration / group administration. • MPL file import• Secure password assignment, with separate password
(encrypted) for the system administrator • Optimized database administration• Automatic deletion of database caches and
MPL files after a defined amount of time• Share plannings in organisation• Simple client installation using MSI (Microsoft Window Installer)• DICOM: Configuration of query character sets • Individual configuration of output modality • Removal of specific DICOM-tags from Export • Import from PACS can be activated/deactivated• Auto Query / auto search function• New modern design
3 D P R I N T I N G
3D Printing
• Direct integration in mediCAD® 6• Fast transfer of planning data.• Synchronization for clinic and implant manufacturers.• Planning of individual prostheses using the DICOM dataset sent
by the customer.• Provision of the planning software mediCAD® 3D and the
appropriate interface for your design software.
Integrated in mediCAD® 6
mediCAD®Services
mediCAD® Services is an independent portal that offers access to our services.
services.mediCAD.cloud
Create 3D models of anatomical regions and print them in 3D. The prints can be ordered out of mediCAD® planning software and are available in two different materials. Benefit from a real preoperative view of operating regions.
New version mediCAD® 6
• Multi-window support• Direct connection to mediCAD® Services• Dark mode / bright mode• Layer function- create different plans• Mixed licensing: mediCAD® Classic and mediCAD® Web
use same license.• Guaranteed MDR conformity until 2020• Updated data protection and data security guidelines• New and improved video tutorials explaining the functions• Several bug fixes in all functions / modules
S E R V I C E S
New platform for sharing information related to arthroplasty• Encyclopedia• Knowledge from experts• Practical knowledge• Publishing platform for studies and reference reports
www.endo-base.com
www.mediCAD.eu www.mediCAD.eu
The mediQR PACS interface was replaced as of July 1, 2019 by the Query Client
Further highlights and technical improvements concerning your security of investment:
Integrated in mediCAD® 6
• ®®®
210 mm
mediCAD Hectec GmbHOpalstr. 54 | DE-84032 Altdorf / Landshut / Germany | Phone +49 871 330 203-0 | [email protected]
Prin
t no.
803
/ 09
-201
9 - A
ll rig
hts r
eser
ved
www.mediCAD.eumediCAD® Web is available as a stand-alone product or through direct integration via Siemens teamplay.
Shoulder 3D• Supported image formats: : CT, Low Dose CT, CBCT, MRI• Automatic landmark detection• Removal of metallic structures:
e.g. implants and screws• Artifact reduction in images displaying implants
Especially for corrective planning• Automatic humerus segmentation
Spine 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI and X-Ray• Automatic MRT and CT segmentation• Quick and easy planning of the sagittal balance• First module in mediCAD®OR
For interoperative monitoring of preoperative planning
Flexibility
mediCAD® Web offers maximum flexibility. As a web application, you can access the planning software
when and where you want. Log in from your tablet or any other device via an internet browser to start
working.
Efficiency
Due to the reduced workflow, which has been deliberately simplified and limited to the essential com-
ponents, as well as our support, planning can be carried out with the greatest possible efficiency.
Clarity
The mediCAD® Web user interface is simple, modern and easy to understand. An intuitive planning
process ensures that the software is easy to use.
Cost savings
Central user administration and simple administration via the server helps to save costs. Cumbersome
client setup and virtualization is no longer required.
Audit-compliance
mediCAD® Web is certified as a medical device and fulfills all requirements for saving the planning in
the hospital systems in an audit-proof manner. Together with the qualified training courses conducted
by mediCAD Hectec GmbH, the software guarantees users audit-compliance.
5 points in favor of mediCAD® Web
and other highlights
ServiceQualityFuture
mediCAD® 3D mediCAD® 6More Highlights
Knee 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI, X-Ray• Automatic landmark detection• Removal of metallic structures
e.g. implants, screws (artifacts) and a hide function for bones/implants• Automatically provides information on the rotation of the femoral
component in relation to the transepicondylar axis and the posterior condyle tangential
• Measurement of postoperative rotation • Configurable planning wizard
(TKA and hybrid planning)• Simple size determination without leg axis measurements• Femoral / tibial torsion measurement• Posterior tibial slope measurement
Knee 3D Sport• Patellofemoral measurements
TT-TG distance, TT-PCL, sulcus angle, trochlear depth, femoral and tibial torsion (according to Waidelich, Schneider and Jend), Trochlea classification (according to Dejour)
• Corrective osteotomy• Leg axis measurement
HTO and DFO planning, double-level osteotomies, derotations, tibial posterior slope measurements
License for mixed operation with mediCAD® 6mediCAD® Web
www.mediCAD.eu www.mediCAD.eu
• ®®®
210 mm
mediCAD Hectec GmbHOpalstr. 54 | DE-84032 Altdorf / Landshut / Germany | Phone +49 871 330 203-0 | [email protected]
Prin
t no.
803
/ 09
-201
9 - A
ll rig
hts r
eser
ved
www.mediCAD.eumediCAD® Web is available as a stand-alone product or through direct integration via Siemens teamplay.
Shoulder 3D• Supported image formats: : CT, Low Dose CT, CBCT, MRI• Automatic landmark detection• Removal of metallic structures:
e.g. implants and screws• Artifact reduction in images displaying implants
Especially for corrective planning• Automatic humerus segmentation
Spine 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI and X-Ray• Automatic MRT and CT segmentation• Quick and easy planning of the sagittal balance• First module in mediCAD®OR
For interoperative monitoring of preoperative planning
Flexibility
mediCAD® Web offers maximum flexibility. As a web application, you can access the planning software
when and where you want. Log in from your tablet or any other device via an internet browser to start
working.
Efficiency
Due to the reduced workflow, which has been deliberately simplified and limited to the essential com-
ponents, as well as our support, planning can be carried out with the greatest possible efficiency.
Clarity
The mediCAD® Web user interface is simple, modern and easy to understand. An intuitive planning
process ensures that the software is easy to use.
Cost savings
Central user administration and simple administration via the server helps to save costs. Cumbersome
client setup and virtualization is no longer required.
Audit-compliance
mediCAD® Web is certified as a medical device and fulfills all requirements for saving the planning in
the hospital systems in an audit-proof manner. Together with the qualified training courses conducted
by mediCAD Hectec GmbH, the software guarantees users audit-compliance.
5 points in favor of mediCAD® Web
and other highlights
ServiceQualityFuture
mediCAD® 3D mediCAD® 6More Highlights
Knee 3D• Supported image formats: CT, Low Dose CT, CBCT, MRI, X-Ray• Automatic landmark detection• Removal of metallic structures
e.g. implants, screws (artifacts) and a hide function for bones/implants• Automatically provides information on the rotation of the femoral
component in relation to the transepicondylar axis and the posterior condyle tangential
• Measurement of postoperative rotation • Configurable planning wizard
(TKA and hybrid planning)• Simple size determination without leg axis measurements• Femoral / tibial torsion measurement• Posterior tibial slope measurement
Knee 3D Sport• Patellofemoral measurements
TT-TG distance, TT-PCL, sulcus angle, trochlear depth, femoral and tibial torsion (according to Waidelich, Schneider and Jend), Trochlea classification (according to Dejour)
• Corrective osteotomy• Leg axis measurement
HTO and DFO planning, double-level osteotomies, derotations, tibial posterior slope measurements
License for mixed operation with mediCAD® 6mediCAD® Web
www.mediCAD.eu www.mediCAD.eu