Mechanical analysis of Foam and plastic honeycomb panels
8
Mechanical analysis of Foam and plastic honeycomb panels Simon Gonzalez
description
Mechanical analysis of Foam and plastic honeycomb panels. Simon Gonzalez. Foam Panel. Composition of Foam Panel FR4 skins Blue plastic mesh Glued with Araldite 2011 (side 1) and Araldite AY-103 (side 2) Aluminum frame - PowerPoint PPT Presentation
Transcript of Mechanical analysis of Foam and plastic honeycomb panels
Mechanical analysis of Foam and plastic honeycomb panels
Simon Gonzalez
Foam Panel• Composition of Foam Panel
– FR4 skins– Blue plastic mesh– Glued with Araldite 2011 (side
1) and Araldite AY-103 (side 2) – Aluminum frame
• Scans of the panel were done on both sides along the length and width of the panel.
Results From Side 1
• Standard deviation from measurements (in mm)– 0.16411 for Z(136)– 0.11056 for Z(288)– 0.06977 for Z(527)– 0.05125 for Z(688)
400 600 800 1000 1200 1400 16000
0.5
1
1.5
2
2.5
3
3.5
4
ref. - Z(136)ref. - Z(288)ref. - Z(527)ref. - Z(688)
Edge A to C
• Standard deviation from measurements (in mm)– 0.05451 for Z(200)– 0.07511 for Z(400)– 0.05545 for Z(715)– 0.05803 for Z(900)
400 500 600 700 800 900 1000 1100 1200 1300 1400
-0.2
0
0.2
0.4
0.6
0.8
1
ref. - Z(200)ref. - Z(400)ref. - Z(715)ref. - Z(900)
Edge B to D
Results From Side 2
400 600 800 1000 1200 1400 16000
2
4
6
8
10
12
ref. - Z(108)ref. - Z(511)
Edge A to C
• Standard deviation from measurements (in mm)– 0.0387 for Z(108)– 0.0439 for Z(511)
400 500 600 700 800 900 1000 1100 1200 1300 1400
-0.7
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
ref - Z(400)ref - Z(715)ref - Z(900)ref - Z(200)
Edge B to D
• Standard deviation from measurements (in mm)– 0.03568 for Z(400)– 0.03909 for Z(715)– 0.03947 for Z(900)– 0.02269 for Z(200)
• The graphs is generated by subtracting the panel form the marble reference.
Large Honeycomb Panel• Consist of a plastic
honeycomb.
• Scans of the panel were done on both sides along the length and width of the panel.
Results From Side 1 Edge and Side 2 Edge A to B
0 200 400 600 800 1000 1200 1400 1600 1800 2000
-7
-6
-5
-4
-3
-2
-1
0
1
ref. - Z(117)
ref. - Z(441)
ref. - Z(791)
ref. - Z(1163)
Side 1 Edge A to B
• Standard deviation from measurements (in mm)– 0.05247 for Z(117)– 0.0846 for Z(441)– 0.08411 for Z(791)– 0.09544 for Z(1163)
0 500 1000 1500 2000 2500
-6
-5
-4
-3
-2
-1
0
1
2
3
4
ref. - Z(52.64)ref. - Z(771.36)
Side 2 Edge A to B
• Standard deviation from measurements (in mm)– 0.0999 for Z(52.64)– 0.07321 for Z(771.36)
Results From Side 1(edges C to D and D to C), Side 2 (edges C to D and D to C)
200 400 600 800 1000 1200 1400 1600 1800
-8
-6
-4
-2
0
2
4
6
8
10
CD ref. -Z(401.82)
CD ref. - Z(986.5)
DC ref. - Z(400.72)
DC ref. - Z(987.4)
Side 1
• Standard deviation from measurements (in mm)– 0.1965 for Z(401.82)– 0.14259 for Z(986.5)– 0.25678 for Z(400.72)– 0.22024 for Z(987.4)
200 400 600 800 1000 1200 1400 1600 1800
-3
-2
-1
0
1
2
3
4
5
6
CD ref. - Z(403.57)
CD ref. - Z(984.18)
DC ref. - Z(402)
DC ref. - Z(983)
Side 2
• Standard deviation from measurements (in mm)– 0.2421 for Z(403.57)– 0.19152 for Z(984.18)– 0.17784 for Z(402)– 0.11398 for Z(983)
Results From Curve Side 1(edges C to D and D to C), Side 2 (edges C to D and D to
C)
200 400 600 800 1000 1200 1400 1600 1800
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
0.4
CD line - (ref. - Z(401.82))DC line - (ref. - Z(400.72))CD line - (ref. - Z(986.5))DC line - (ref. - Z(987.4))
Side 1
• Standard deviation from measurements (in mm)– 0.0348 for Z(401.82)– 0.0513 for Z(400.72)– 0.0439 for Z(986.5)– 0.0317 for Z(987.4)
200 400 600 800 1000 1200 1400 1600 1800
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
CD line - (ref. - Z(403.57))CD line - (ref. - Z(984.18))DC line - (ref. - Z(402.00))DC line - (ref. - Z(983))
Side 2
• Standard deviation from measurements (in mm)– 0.0379 for Z(403.57)– 0.0255 for Z(402.00)– 0.0340 for Z(984.18)– 0.0379 for Z(983)
