Measurement and Dimensional Analysis Unit 1. Making Measurements Length - the distance between any...
-
Upload
rudolph-richards -
Category
Documents
-
view
218 -
download
1
Transcript of Measurement and Dimensional Analysis Unit 1. Making Measurements Length - the distance between any...
Making MeasurementsLength - the distance between any two points (m or cm)
Mass - the quantity of matter in an object (kg or g)
Volume - a measure of space, in cubic units (m3 or cm3)
Weight - the force with which gravity pulls on a quantity of matter (measured in Newtons)
Temperature - the degree of hotness or coldness of a body or environment (measured in Celsius or Kelvin)
Units of MeasurementScientists use the International System of Units (SI) for consistency
Quantity UnitAbbreviatio
nLength meter mMass kilogram kgTime second s
Temperature kelvin KElectric Current ampere A
Amount of substance
mole mol
SI Prefixes for large measurements
1 km = 1,000 m
Prefix Symbol MeaningMultiple of base
unit
kilo- k thousand 1,000
mega-
M million 1,000,000
giga- G billion 1,000,000,000
SI Prefixes for small measurements
1 centimeter = 0.01 meters
Prefix Symbol MeaningMultiple of base
unit
deci- d tenth 0.1
centi- c hundredth 0.01
milli- m thousandth 0.001
micro- μ millionth 0.000 001
nano- n billionth 0.000 000 001
Calculating Volume of a Box
1.Measure the length.
2.Measure the width.
3.Measure the height.
4.Calculate the volume
• V = l * w * h
• Units3 (cm3, m3, etc)
Reading a Graduated Cylinder
1. Always look at the graduated cylinder at eye-level (not above it or below).
2. Always measure the volume from the BOTTOM of the menicus (the curved surface of the liquid)
Warm Up
• Open up to page 12 in your notebook, and answer the following question IN COMPLETE SENTENCES:
1. How can this information be used in everyday life?
2. What types of measurements will I be using in my future jobs?
Key Conversion Factors1 cm = 10 mm
1 m = 100 cm
1 m = 1000 mm
1 km = 1000 m
• *The base unit (meters) can be changed to other units (grams, liters, etc). Prefixes remain the same (centi-, milli-, kilo-)
Dimensional AnalysisSo, how do we know how many meters are in 4.6 kilometers?
We use dimensional analysis to convert from one unit to another!
Dimensional Analysis1. Write down what you know, with units.
2. Set up a T-chart.
3. Fill in the units FIRST, making sure that given units cancel out.
4. Add your key conversion factor into your T-chart.
5. If necessary, continue steps 3 and 4 until you reach your desired answer.
Practice # 1So, how do we know how many meters are in 4.6 kilometers?
1. Write down what you know, with units.
2. Set up a T-chart.
3. Fill in the units FIRST, making sure that given units cancel out.
4. Add your key conversion factor into your T-chart.