MAZAK INTEGREX 300 4S / 1500 U

KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

2

MACHINE INFO

Manufacturer

Type

Year of manufacture

Control

Machine number

Automatic cutting

New milling spindle

MAZAK INETGREX 300 4S / 1500 U | | 2

with a complete and extensive set of tool holders and tools

EQUIPMENT

| 3 MAZAK INETGREX 300 4S / 1500 U |

Main spindle and counter spindle B-axis Y-axis 5 axes simultaneous 40-slot tool magazine 2 hydraulic three-jaw chucks KITAGAWA B-210 1 collet chuck Documentation / Machine parameters on CD and much more… (see below)

TECHNICAL DATA Capacity Chuck size

Maximum swing

Swing over cross slide

Swing during Y-axis process

Maximum machining diameter

Bar work capability

Max. machining length

Max. support weight

Main spindle Rotating speed

Acceleration and deceleration time

Trough-hole diameter

Motor output (half-hourly rating)

Max. torque Secondary spindle Rotating speed

Acceleration and deceleration time

Trough-hole diameter

Motor output (half-hourly rating)

Max. torque Milling head Type

Tool shank type (milling/turning)

Tool size O.D. turning I.D. turning Milling tool (max.)

| 4 MAZAK INETGREX 300 4S / 1500 U |

| 5 MAZAK INETGREX 300 4S / 1500 U |

90° indexing time

Motor output (20% ED)

Maximum torque (20% ED)

Milling spindle speed

Acceleration and deceleration time

Orientation time (12.000 0) Feed axes Rapid feed rate X / Y / Z

Movement stroke X / Y / Z Others Coolant tank capacity

Power requirement (continuous)

Air pressure

Total air capacity Machine dimensions and weight, approx. Machine (with magazine, excl. oil pan) Height of centers Lenght Width Height

Floor space required

Weight (incl. oil pan)

| 6 MAZAK INETGREX 300 4S / 1500 U |

Noise Noise level (LWA) Unconfirmed level (K) Measuring conditions Measuring method Measuring position

The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission and exposure levels, this cannot be used reliably to determine whether or not further precautions are required. Factors that influence the actual level or exposure of the work-force include the characteristics of the work room, the other sources of noise, etc. i.e. the number of machines and other adjacent processes, and the length of time for which an operator is exposed to the noise. Also the permissible exposure level can vary from country to country. This information, however, will enable the user of the machine to make a better evaluation or the hazard and risk.

MILLING SPINDLE PROTOCOL

| 7 MAZAK INETGREX 300 4S / 1500 U |

GEOMETRY PROTOCOL

| 8 MAZAK INETGREX 300 4S / 1500 U |

| 9 MAZAK INETGREX 300 4S / 1500 U |

| 10 MAZAK INETGREX 300 4S / 1500 U |

MACHINE PICTURES

| 11 MAZAK INETGREX 300 4S / 1500 U |

| 12 MAZAK INETGREX 300 4S / 1500 U |

| 13 MAZAK INETGREX 300 4S / 1500 U |

TRANSPORT PLAN

Thank you very much for your interest

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

KISTNER GmbH & Co. KG | Industriestrasse 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

Diapositiva numero 1Diapositiva numero 2Diapositiva numero 3Diapositiva numero 4Diapositiva numero 5Diapositiva numero 6Diapositiva numero 7Diapositiva numero 8Diapositiva numero 9Diapositiva numero 10Diapositiva numero 11Diapositiva numero 12Diapositiva numero 13Diapositiva numero 14