Master CatalogMaster Catalog - plews-edelmann CatalogMaster Catalog. 2 ... Part Number Reference...
Transcript of Master CatalogMaster Catalog - plews-edelmann CatalogMaster Catalog. 2 ... Part Number Reference...
Weatherly Index 144Catalog No. ACD-2002Supersedes #C94
Weatherly Index 144Catalog No. ACD-2002Supersedes #C94
• Tire Repair Materials & Hardware
• Air Hose, Couplings, Tools & Accessories
• Tire Repair Materials & Hardware
• Air Hose, Couplings, Tools & Accessories
Master CatalogMaster Catalog
2
Inde
x
IndexIndex
Tire Repair Materials & AccessoriesCold Patches & Bike Kits ..................................................3On-The-Wheel Tire Repair Kits..........................................4Cements, Chemicals & Sealants ....................................5-6Tire & Tube Patches..........................................................7Heavy-Duty Tire Repair ....................................................8Repair Application Charts ................................................9Tire Service Center & Repair Kits ..............................10-11Tire Repair Power Tools & Accessories ....................12-13Buffer Stones & Chucks..................................................14
Tire/Tube Valves & AccessoriesSnap-In Valves ................................................................17Clamp-In Valves ........................................................18-19Truck & Bus Valves....................................................20-21Special, Miscellaneous, Air-Liquid Valves..................22-24Valve Extensions........................................................25-26Valve Cores & Caps ..................................................27-28
Tire Service ToolsTire Pressure Gauges ................................................29-31Service Tools ..................................................................32Inflator Gauges and Hoses ........................................33-34Visualizer II ....................................................................35Air Line Chucks ..............................................................36
Blow Guns & AccessoriesSafety Blow Guns............................................................37Standard Blow Guns ......................................................38Blow Gun Accessories ....................................................39
Filters, Regulators & LubricatorsAir Preparation................................................................40Filters – Construction ................................................41-42Gauges ......................................................................41-42Filters – Mini, Compact, Modular, Standard....................44Coalescing Filters ............................................................45Regulators ......................................................................45Lubricator – Microfog ....................................................46Lubricator – Oil Fog ........................................................46Piggyback Filter/Regulators ............................................47Regulator – Filter – Lubricators ......................................48Desiccant Dryers ............................................................51Adapters & Accessories ..................................................52
Air Line Brass Hose Fittings & AccessoriesBarbed and Brass Hose Fittings ................................53-55Hose Crimpers & Ferrules ..............................................56Airline Accessories ....................................................57-58Pneumatic Valves............................................................59Mist Coolant Unit & Accessories ....................................60
Hose ProductsRecoil Hose & Accessories........................................61-62Hose Assemblies, Air/Multi-Purpose Hose ................63-64Air Hose Reels ................................................................65
Pneumatic Couplers & PlugsIntroduction, Features/Benefits ......................................66Combo Couplers ............................................................67Lincoln Series ................................................................67ARO Series ................................................................67-68Automotive Standard ................................................68-70Industrial Series ........................................................70-71Straight-Thru Couplers ..................................................72Diamond-U Interchange ..................................................72Coupler Interchange........................................................73Plug Interchange ............................................................74
Part Number Reference GuidePart Number to Page Number ..................................84-88
Cold Patch Tire Repair
Cold Patch Rubber RepairCold Patch Rubber Repair
Cold Patches
11-004 Bicycle Tube Foil-Back Repair Kit. Handy kit easily fits in pocket.Contains foil backed patches, .25 oz. cement, abrasive paper and directions.Moisture resistant plastic case.
11-004
3
Camel No. Description
Tire
Rep
air K
its
On-the-Wheel Tire Repair KitsOn-the-Wheel Tire Repair Kits
4
Repair Kits
Inserts & String Repairs
15-161 Refill Kit for 15-162. 10 strings.15-162 Super-Grip Emergency Tire Repair Kit. Contains our mostpopular Super-Grip probe, open-eye tool, .30 fl. oz. Universal Cementand 5 radial inserts. For all bias ply and non-speed rated radial tires.15-163 Emergency Repair Kit. Very popular. Contains 15-172 (openeye needle) and 15-174 (Probe) screwdriver type tools. For all bias plyand non-speed rated radial tires.15-164 Refill Kit. Use for 15-163. Contains 5 refill strips and .30 fl.oz. Universal Cement.15-165 Emergency Repair Radial Tire Kit. This handy kit easily fits inthe glove box of any car. Contains 10 repair strings and a closed-eyeneedle. Not for speed rated radial tires.15-168 Tubeless Tire Repair Kit. Contains 6 assorted straight plugs,.30 fl. oz. Universal Cement and an open-eye needle. Not for use onradial tires. 15-169 Perma-Strip Patch. Emergency repair kit for bias ply andnon-steel belted radial tires. Six strips, cement, and an open eyeneedle included.15-170 Perma-Strip Patch Refill Kit. Contains 12 strips, .30 fl. oz.Universal Cement. Refill for the 15-169.
15-179 Perma Strip Patch 1/4" x 2". For bias ply and non-steel beltedradial tire repairs. Box of 50.15-184 4" Radial Inserts. For most auto and light truck radial tireemergency repairs. Box of 20.15-206 7" String Repairs. For bias ply and tubeless tire emergencyrepairs. Box of 50.15-207 7-1/2" Heavy-Duty String Type Repairs. For bias ply and radialtire nail hole emergency repairs. Box of 50.15-280 4" Steel Belted Radial Inserts. These inserts are our bestselling for radial tire emergency repair. Box of 60.15-281 7" Steel Belted Radial Truck Insert. Heavy duty inserts areexcellent for emergency repairs of nail holes in truck tires. Contains onesealed bag of 30 inserts.
WARNING: Keep tire repair kits away from children. Always use eye protection when working on tires. Do no attempt on-the-wheelrepairs on tires inflated with a gas propelled tire sealant. Follow sealant manufacturer’s directions for deflating tire and removing thetire from the rim. Have tire promptly repaired by the installation of a permanent patch. It is recommended that a trained repair personinspect the inside of the tire carefully for injury to ensure that the puncturing object did not cause further damage.
15-162
15-16315-164
15-165
15-168
15-169
15-179
15-184
15-207
15-281
15-206
15-161Camel No. Description
Cements
CementsCements
5
Nonflammable Boot Cement
Universal Cement. 2 fl. oz. tube.Universal Cement. 1/4 pint (4 fl. oz.) can.Universal Cement. 1/2 pint (8 fl. oz.) can.Universal Cement. 1 quart. Can fits 14-149 dealer cabinet.
1/2 Pint.
1/2 Pint chemical Vulcanizing, flammable.
12-07712-08512-08612-089
12-087
12-287
Cam-Cure® Flammable Cement. For professional use.
Cam-Cure® Heavy-Duty Nonflammable Cement. For use on heavy-duty applications. Must be Cam-Cure® Repair Units to insure a permanent bond.
CAUTION: Use in well ventilated area. Avoid prolonged breathing or inhalation of vapors. Chlorinated solvent is an eye and skinirritant. If splashed in eyes, flush with water for 15 minutes. If ingested, do not induce vomiting. Call physician or Poison ControlCenter immediately.
12-287
12-077
12-086 12-087
Camel No. Description
Chem
ical
s &
Sea
lant
s
Chemicals & SealantsChemicals & Sealants
6
Chemicals
12-090 Bead Sealer. Quart can with brush in cap. Prevents bead leaksand eases tire installation.
12-092 Nonflammable Liquid Buffer/Cleaner. Quart can with “squirt top."Used to clean rubber so patches will adhere properly. Use prior to all power buffing.
12-093 Nonflammable Spray Liquid Buffer. 16 oz. aerosol can.
12-095 “Stuf" Concentrated Tire Mounting Lubricant with Rust Inhibitor.Eight lb. pail makes five gallons when mixed with warm water. Stops rubber squeaks, easy to use and safe.
12-096 Rubber Lubricant and Preservative. Large 40 pound pail. Same product as 12-095.
12-097 Rubber Lubricant. Cleans and preserves tires, rubber parts, floor mats and vinyl tops. One gallon bottle.
Sealants
12-072 Tire Sealant. One gallon bottle with pump.
12-078 Tire Sealant. Convenient 8 fl. oz. squeeze bottle. Perfect sizefor small trailers, wheelbarrows and other small tire vehicles.
12-079 Tire Sealant. The 16 fl. oz. squeeze bottle is just the rightamount for lawn tractors, golf carts, trailers and ATVs.
Camel Seal Tire Sealant: The solution to bead leaks, small tire puncturesand slow leaks. Will not dry out, separate, damage the wheel, or freeze to -32°F. Seal small leaks up to 1/8" in diameter. Great for farm and industrialtractors, construction equipment and off-road tires.
CAUTION: Use in well ventilated area. Avoid prolonged breathing or inhalation of vapors. Chlorinated solvent is an eye and skinirritant. If splashed in eyes, flush with water for 15 minutes. If ingested, do not induce vomiting. Call physician or Poison ControlCenter immediately.
12-090 12-092
12-093
12-095
12-097
12-072
12-078 12-079
Camel No. Description
Tire &Tube Patches
Tire & Tube PatchesTire & Tube Patches
7
14-400
14-403
14-408
14-134
Tube Tire Repair Kit. For tire and tube repairs.Contains patches, .30 fl. oz. cement and buffer. 403020302020
Foil-Back Repair Units
1-1/4"1-1/2"1-3/4"2-1/8"3-1/8"4" x 1-7/8"6" x 2-7/8"
50303030303010
RoundRoundRoundRoundRoundOvalOval
14-40014-40114-40214-40314-40414-40814-40914-134 Foil Back Repair Kit. Contains (4) 1-1/4" Repair units. (1) .30 Fl.
oz. cement. (1) Thumb buffer.
Qty. TypeCamel No. Size
2-1/4"3-1/4"4-1/8"
Tire Repair Kit for D-I-Y radial repairs. Contains patches, .30 fl. oz. cement and buffer. 302010
Sm. RoundMed. RoundLg. Round
14-132
14-13714-13914-140
Chembond® Tube and Bias Ply Patches
1-5/8"2-1/4"3-1/8"1-1/2" x 2-1/2"1-7/8" x 3-7/8"2-5/8" x 5-3/4"
Sm. RoundMed. RoundLg. RoundSm. OvalMed. OvalLg. Oval
14-130
14-15214-15314-15414-15714-15814-159
Used for repairing tubes and tires where fabric reinforcement is not required. Repairunits feature a foil backing that keeps the repair fresh. Conveniently packed. For bestresults use with Camel-Cure® Cement.
These world famous patches are available in two shapes and six sizes. Pure rubber flowsinto the injury. May be applied with Universal Cement or an electric vulcanizer.
Radial Patches
RADIAL PATCHES: Used for nail hole injuries in auto and light truck tires. Heavier con-struction than Chembond patches. Utilize buffer cleaner and Universal Cement for a strong repair.
14-130
14-13214-153 14-158
14-139See price sheet for packaging options.
Heav
y-Du
ty T
ire R
epai
r
Heavy-Duty Tire RepairHeavy-Duty Tire Repair
8
Reinforced Unitized Boots
3-1/4"4-1/2"6"7-3/8"8-3/4"10-3/4"
3-3/16" x 3-3/16"4-1/2" x 4-1/2"6" x 6"7-3/8" x 7-3/8"
222345
2010101010
6
2/Bag1/Bag1/Bag1/Bag
Nail holeSmallMediumMed. Lg.LargeTruck
Nail holeSmallMediumMed. Lg.
13-10213-10313-10513-10613-10713-108
13-12313-12613-12713-128
Qty. TypeCamel No. Size Plies
Boots Packed in Hang-Up Printed Poly Bags
Right angle cord construction uses high tensile cords for strength.Won’t dry out or self-cure. May be used with cement or a spotter.Not for use on tubeless tires.
Universal Repair Units
Bias Ply Repair Units
11
11224
3020
3020101010
2-1/2"3-1/4"
2-1/2"3-1/4"4"5"6-1/2"
13-45113-452
13-25113-25213-25313-25413-255
Qty. SizeCamel No. Ply
Cam-Cure® Universal and Bias Ply Repair Units. Each repair features our exclusive centerline construction to insure that the repair unit is centered over injury. All repair units have been tested byan independent laboratory for all applicable DOT tests. They meet orexceed these requirements and outlast many competitive products,both foreign and domestic.
Feature square woven fabric construction and may be used for radial andbias-ply tire repairs when used with Cam-Cure® cement.
For bias ply tires only. Bead arrow is clearly marked. Has four centering lines.
Radial Repair Units For Radial Tires Only.
12223
20201010
5
2-1/4" x 3"2-3/4" x 4-1/2"3" x 4-1/8"3" x 6-3/4"4" x 7-1/2"
13-31013-31213-32013-32213-340
Plug-N-Patch for Radial and Bias Ply Tires
15-290 Small Reinforced Plug-N-Patch. For up to 1/8" crown puncture. Box of 15.15-291 Medium Reinforced Plug-N-Patch. For up to 1/4" crown puncture. Box of 10.15-295 Small Round Molded Rubber Plug-N-Patch.For auto and truck nail hole injuries. Designed with moldedin straight pin. 1/8" stem size. Box of 48.15-296 Medium Round Molded Rubber Plug-N-Patch.For auto and truck nail hole injuries. Designed with moldedin straight pin. 1/4" stem size. Box of 20.15-297 Large Round Molded Rubber Plug-N-Patch.For truck injuries caused by nails and screws. Designedwith molded in straight pin. 3/8" stem size. Box of 20.15-298 Plug-N-Patch Repair Kit. Contains (1) 15-295,(1) 15-296, (1) .30 fl. oz. cement.
NOTE: The Plug-N-Patch will repair tires with nail hole injuries in the crown or side wall including speed rated radial tires (for specificssee your Tire Owners Manual). Repair unit is cemented on inside of tire and pushed through injury hole (which should be drilled out with atapered drill). The metal quill or pin is pulled with pliers until repair unit seats. Stitch Plug-N-Patch down from the inside and cut off excessplug rubber so it is flush with tread or sidewall.
13-106
13-451
13-251
13-310
15-298
See price sheet for packaging options.
13-230 Cam Cure Repair Kit. Contains (2) 13-452 patch, (1) .30 fl. oz. cement.
Application Chart
Application ChartApplication Chart
9
Inch mm 4 6-8 10-12 14-16 18-20 22-24 6-18 8-12 14-18 20-24
FarmImplement
1/2"(15mm) 1 1/2"(40mm)3/4"(20mm) 1 1/4"(30mm)
6.50 - 10.0013-322 11.00 - 14.00
7.00 - 15.5
13-312 3/8"(10mm) 3/8"(10mm) 3/8"(10mm) 3/8"(10mm) All Sizes
3/8"(10mm) 3 1/8"(80mm)13-340 1/2"(15mm) 2 3/4"(70mm) 3/4"(20mm) 3/4"(20mm)
3/4"(20mm) 2 3/8"(60mm)
3/8"(10mm) 3/8"(10mm)1"(25mm) 2 3/8"(60mm)
1/2"(15mm) 2 3/8"(60mm)3/4"(20mm) 2"(50mm)
1/4"(5mm) 1/2"(15mm) 1/4"(5mm) 1/4"(5mm) All Sizes
2 Cords x 3/4"(20mm) 6.50 - 14.001 Cord x 1 1/2"(40mm) 7.00 - 15.5
8.25 - 14.009.00 - 15.5
1/2"(15mm) 1 1/2"(40mm) 125-2303/4"(20mm) 1 1/4"(30mm) P155-235
13-310 up to 1/8" (3mm) up to 1/8" (3mm) All Sizes13-312 1/4"(5mm) 1/4"(5mm) 1/4"(5mm) 1/4"(5mm) All Sizes
3/8" 10 13-252 13-253 13-253 13-254 13-255 13-253 13-252 13-253 13-254
1" 25 13-253 13-254 13-255 13-254 13-253 13-254 13-255
2" 50 13-255 13-255 13-255 13-255 13-256
4" 100
Bias Ply Selection Chart
1/4" 6 13-251 13-251 13-252 13-252 13-252 13-252 13-252 13-252 13-252 13-252
1/2" 15 13-253 13-253 13-254 13-254 13-255 13-254 13-252 13-253 13-254
1-1/2" 35 13-254 13-254 13-255 13-255 13-253 13-254 13-255
3" 75
5" 125
INJURY
NOTREPAIRABLE
B B
A
C
Radial Selection Chart
8.25 - 14.009.00 - 15.5
3/8"(10mm) 2 3/8"(60mm)13-340 1/2"(15mm) 1 1/2"(40mm) 1/2"(15mm) 1/2"(15mm)
3/4"(20mm) 1"(25mm)
13-310 up to 1/4" (5mm) up to 1/4" (5mm) All Sizes
13-320 1 1/4"(30mm) 3/4"(20mm) 3/4"(20mm) 3/4"(20mm) All Sizes
Camel No.Sidewall Max. Injury Size
(Inches, mm)W L
Tread & Shoulder Max. InjurySize (Inches, mm)W L
TireWidth/Type
A-B NON-REPAIRABLE AREA
6.00 - 7.00 2 1/2", 63mmPassenger and truck tires 1 1/2", 38mm
7.50 - 16.00 3", 75mm17.5 - 23.5 3 1/2", 90mm24.00 - 29.5 5", 125mm30.00 - 33.5 6", 150mm36.00 - 50.5 7 1/2", 190mm
Max. Injury Width Bias Ply Rating of Tire Reinforced repair with less than 50% of plies damaged.
6.00 - 7.507 R - 8.5 R
175R - 215R(6 - 8 PR)
13-310
13-312
13-320
13-322
13-340
13-310
13-312
13-320
2 Cords x 1 1/2"(40mm)1 Cord x 3 1/8" (80mm)
up to 1/8" (3mm)
up to 1/4" (5mm)
up to 1/8" (3mm)
up to 1/4" (5mm)
3/8" (10mm) 3/8" (10mm)
1/2"(15mm) 1/2"(15mm)
1/2"(15mm) 1/2"(15mm)
3/4"(20mm) 3/4"(20mm)
1"(25mm) 1"(25mm)
8.25 - 10.009.00 - 11.00
11.00 - 14.0012.00 - 15.5
Pass
-en
ger
Car
Ligh
t Tru
ckM
ediu
m a
nd H
eavy
-Dut
y Tr
ucks
Trac
-to
r
Tire
Ser
vice
Cen
ter &
Rep
air K
its
Tire Service Center & Repair KitsTire Service Center & Repair Kits
10/11
Dealer Kit
Contains our most popular T-handle tools, 1/4 pint of universalcement and two boxes of 15-184 radial repairs. Box keeps toolsorganized, with reclosable lid.
String Repairs, 10 each.Super Grip Rasp, 1 each.Super Grip Split-eye needle, 1 each..59 fl. oz. cement.
15-28015-22515-22412-965
15-262 Emergency Off-Road Tire Repair Kit
Comes in handy tool pouch.15-262 Contents:
CAUTION: Puncture repairs made “on-the-wheel” are classified as an emergency repair. If an emergency repair is made, thetire must not be run more than 100 miles at speeds no greater than 50 MPH until tire is removed from the rim, inspected carefully,and a permanent repair is made.
15-189
15-178
15-262
Repair Kits
Heavy-Duty Truck Tire Emergency Repair Kit. Contains everything needed for emergency repairs on the largest truck tires. Contains heavy-duty all steel split-eye T-handle tools with Sheffield steel shaft. 8" spiralcement tool, 2 oz. tube of Universal Cementand 15 heavy-duty inserts. All packed in aheavy reclosable vinyl pouch.
15-282
15-178 Perma-Strip Patch Kit. This kit is an excellent kit for off-road tiressuch as ATVs and farm tires. Contains 50 repair strips, 12-086 univer-sal cement, one 15-210 open-eye needle and one 15-212 probe.
15-282Camel offers a wide variety of bulk stringproducts and hand tools. Contact ourCustomer Service Department for details.
Camel No. Description
Camel No. Description
15-189
Tire Repair Power Tools &
Accessories
12/13
Tire Repair Power Tools & AccessoriesTire Repair Power Tools & Accessories
WARNING: Always use eye protection when working with tires. These tools are designed for tire repairsonly. If tire is speed rated, consult tire manufacturer’s owner’s manual regarding authorized repair to tire andwhether speed rating would still apply. We recommend breaking the tire down and using a patch to repairinjuries in conjunction with a plug. Do not attempt an on-the-wheel repair on tires inflated with a gas propelledsealant. Follow sealant manufacturer’s directions for deflating and removing the tire from the rim. Have tirepromptly repaired by installation of a permanent patch. Failure to follow these safety instructions exactly mayresult in personal injury and/or property damage.
D-I-Y Tire Repair Tools
Professional Stitchers
Open-Eye Repair Needle.Probe for Tire Repair.
15-17215-174
Super-Grip Open-Eye Needle.Super-Grip Tire Probe.Super-Grip Split-Eye Needle.Replacement Shaft for 15-231.Heavy-Duty Truck Needle.Spiral-Grip Cement Needle.Open Eye 8" Truck Tire Needle.
Ryan Awl. 3-1/2" shaft.
15-22415-22515-22715-23015-23115-23215-249
17-274
1/16" face x 1-1/2" diameter.1/4" face x 1-1/2" diameter.1/4" face x 2" diameter.
17-24417-24517-246
Best Quality Professional Tools
3/16" diameter - 7" blade.Combination Buffer/Stitcher. Blister pack.
17-27617-237
Professional Heavy-Duty Tire Reamers
Tire Probe Awls. Used to inspect injuries in tire and remove smallstones and debris.
Corrugated style with screw tip.
Ball bearing stitcher with hardened steel wheel and varnished woodenhandle. Made in the USA.
Tire Service Tools, Knives and Tire Scraper
Taper Point Knife. Sturdy wooden handle.17-248
Tire Marking Crayons
Tire Lettering Stick. Restores the white on hollow and raisedletters on tires. Blister packed.Yellow Tire Marking Crayon. Blister packed.Tire Crayons. Shop pack of 12 boxes with 12 yellow crayonsper box (144 crayons).Cotton Applicator Swab.
17-235
17-23617-253
17-295
These products, as well as all tire tools should never be used by persons unless they have been trained proper-ly according to O.S.H.A. Regulation #29CFR 1910.177 entitled “Servicing Single Piece and Multi-Piece Wheels."
Professional Air Buffers
Vane Repair Kit. For Supreme Buffer.Supreme High Speed Air Buffer. Light-duty buffer for automotive tires and tubes. 0-10,000 RPM.High Speed Air Buffer. Heavy-duty buffer for truck and tractor tire repairs. 0-16,000 RPM.
18-26318-264
18-266
Camel No. Description
15-172
15-174
15-232
17-237
17-245
17-235
17-236
17-295
18-264
18-266
15-249
15-231
15-227
17-274
17-248
Buffe
r Sto
nes,
Chu
cks
Buffer Stones, ChucksBuffer Stones, Chucks
14
Cones, Brushes, and Wheels
Camel No. Description
18-259 Heavy Duty Automotive Buffing Cone. 2-1/2" diameter. Maximum speed 25,000 RPM.
18-260 Standard Automotive Buffing Cone. 2" diameter. Maximum speed 25,000 RPM.
18-259
18-260
These products, as well as all tire tools, should never be used by personsunless they have been trained properly according to O.S.H.A. Regulation#29CFR 1910.177 entitled “Servicing Single Piece and Multi-Piece Wheels."
Chucks and Adapters
Threaded Adapter. 1-7/8" long, with washer and nut formounting tools on 3/8" arbor hole - 26 FPT.
Adapter. 1-11/16" x 3/8" - 26 FPT. Contains two washers andone nut for tools with 3/8" arbor hole. Use with 18-140 chuck.
18-141
18-146
18-146
18-259
18-260
18-141
Snap-In Valves
Snap-In ValvesSnap-In Valves
17
30-412-230-412-5030-412-500
2 pack50 pack500 pack
TR 412 Snap-In ValveFits smaller wheel sizes like hand trucks,wheelbarrows, golf carts, and other spe-cialty vehicles with .453" diameter rimhole. Effective length 7/8". Maximuminflation pressure 60 PSI.
TUBELESS SNAP-IN TIRE VALVESWARNING: The conventional tubelesstire snap-in valves on this page should notbe used with tubeless tires where cold infla-tion exceeds (or may exceed) 65 PSI. Do notuse these valves in rims exceeding .156" inthickness. For thicker applications use ahigh pressure snap-in or a clamp-in valve.To protect you and your tires, all tire valvesshould be replaced when cracks first appear.New tire valves are recommended each timenew tubeless tires are installed...also whensnow tires are mounted or removed.
Snap-In Valves for .453" Rim Holes
30-413-230-413-1030-413-5030-413-500
2 pack*10 pack50 pack500 pack
TR 413. 1-1/4" Effective length.
30-414-230-414-1030-414-5030-414-500
2 pack*10 pack50 pack500 pack
TR 414. 1-1/2" Effective length.
30-418-230-418-1030-418-5030-418-500
2 pack*10 pack50 pack500 pack
TR 418. 2" Effective length.
30-423-430-423-1030-423-5030-423-500
4 pack*10 pack50 pack500 pack
TR 423. 2-1/2" Effective length.
Chrome Sleeve Snap-In Valves.
30-13630-136-50
4 pack*50 pack 413SC-50
Used for .453" diameter rim holes. Do notuse on tires that exceed 65 PSI or onrims that exceed .156" thickness.
TR 413. 1-1/4" Effective length.
30-1864 pack*TR 418. 2" Effective length.
Chrome Sleeve and Nut Dress-up Kits.
30-316-4 (Fits TR413)
30-318-4 (Fits TR418)
4 pack*4 pack*
Used to dress-up rubber snap-in valves.Includes 4 sleeves and 4 chrome nuts.Display packed.
WARNING:Do not use snap-invalves on tires thatexceed a cold infla-tion pressure of 60PSI. Do not use onrims that exceed.156 thickness.
Snap-In Valves for .625" Rim Holes
30-415-230-415-1030-415-5030-415-500
2 pack*10 pack50 pack500 pack
Camel No.Quantity
TR 415. 1-1/4" Effective length.
Special Purpose,High Pressure Snap-In Valve
30-600-1030-600-5030-600-500
10 pack50 pack500 pack
500 pack
TR 600 “HP” Tubeless High PressureSnap-In Valve. Rated to 80 PSI, includescore and cap. .453", 1.27" effective length.Not for rims over 205" thick.
30-425-430-425-1030-425-5030-425-500
4 pack*10 pack50 pack500 pack
TR 425. 2" Effective length.
TR 801. .625" rim hole and 1.31 effective length.
*Display Package.
Camel No.Quantity
30-801-500
30-136
30-186
30-413
30-418
30-415
30-425
30-600
30-801
30-316
Clam
p-In
Val
ves
Clamp-In ValvesClamp-In Valves
18/19
Truck Tubeless Valves - 540 Series
TRNo. A
BREF. Y° Cap Core O-Ring
CamelNo.
32-543-1032-547-10
543D545D
2.313.50
1.382.60
6060
75727572
54055405
543-3543-3
Designed for use with 9.7 cm (.328") rim hole. Rubber O-Ring forms a seal when valve isclamped to rim by tightening hex nut. Designed specifically for use in aluminum wheels.
Tubeless Single Bend Clamp-In Valve
509 4-3/4"32-309-10For one piece drop center aluminum disc wheels with 5/8" rim holes. Has 90° bend.
32-543-10
30-430
30-472
30-445
30-463
32-309
30-472-5 417
TR 417 Clamp-In Valve for Front Wheel Drive
Use on Cadillac El Dorado and Oldsmobile Toronado through 1978.
TR 430 Tubeless Clamp-in Motorcycle Valve
30-430-1010 pack
5 pack
Camel No.Quantity
Fully threaded stem for use on many rim thicknesses. “O” ring seal. Effective length 1-3/16", fits .327" valve hole.
Clamp-In Tubeless Tire Valves
TR No.
Effective Length Packaging
Nickel plated metal valves can be installed in all passenger cars, light trucks andindustrial rims with .453" or .625" valve holes. Rubber grommet forms a seal whenvalve is clamped to rim by tightening hex nut. Maximum inflation pressure is 130 PSI.Includes 2 rubber grommets.
CamelNo
30-463
30-463-5030-463-500
416416416416416
1-1/4"1-1/4"1-1/4"1-1/4"
2"
1 per box10 per box50 per box500 per box50 per box
CAUTION:Due to productiontechniques, the rimvalve hole shouldbe checked forburrs and cleaned if necessary.
AmfloNo.
702D*702702-50
1 per card
Packaging
30-445
Camel No.
Chrome plated clamp-in valves are easily installed in all types of passenger carwheels with .453" or .625" valve holes.
5991B High Performance Tire Valve
TR No.
430
These products, as well as alltire tools should only be used bytrained individuals according toO.S.H.A. Regulation #29CFR1910.177 entitled “ServicingSingle Piece and Multi-PieceWheels.”
*Display Packs
Clamp-In Valves
Truck, Bus ValvesTruck, Bus Valves
20/21
Straight Clamp-In Valve
500500570570570571571571572572572573573573501575574574
2"2"3-1/8"3-1/8"3-1/8"3-3/8"3-3/8"3-3/8"3-3/4"3-3/4"3-3/4"4-3/8"4-3/8"4-3/8’1-1/2"1-1/8"5"5"
32-200-1032-200-10032-201-1032-201-10032-201-25032-202-1032-202-10032-202-25032-203-1032-203-10032-203-25032-204-1032-204-10032-204-25032-205-1032-207-1032-208-5032-208-250
TR No.EffectiveLength Hex NutCamel No.
For use in one piece drop center rims with 5/8" diameter sidemount valve holes.
595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4595-4
These valves may be bent to the desired configuration in accordance with tubeless valve dimension chart in sectioneight (8) of Tire and Rim Book, made to order.
Used on Volvo, Mack and Iveco imported trucks. Fits.382 dia. (9.7mm) rim hole. Includes O ring, nut, coreand cap. 10 pack. (See chart on right.)
Import Truck Tubeless Valves (ETRO)
*Display pack
Camel No. Michelin No. Etro No. DIN NO. A* B* C* D
32-608-10 1485 V3-20-4 87MS9.7 .98/25 2.36/60 27°
* Inches and Millimeters
32-200
32-204
32-205
32-608
33-306
Tube/Screw on Valves
78A33-306-5
TR No.
5-25/32"
LengthCamel No.
Standard Tube Convertible Valves. Valves can be bent as needed.May be applied with heat vulcanization or Universal Cement.
Spec
ial V
alve
s
Special ValvesSpecial Valves
22
Tank ValvesWARNING: Product is designed foruse with compressed air tanks. Be cer-tain the tank valve is securely threadedinto the vessel or tank wall. Read airtank manufacturer’s caution statementregarding maximum air pressure. Donot attempt to over fill tank. Failure tofollow these specifications and direc-tions exactly may result in personalinjury and/or property damage.
High-Pressure Inflating Connections
These valves are constructed of special stainless steel bodies and are intended for use in high pressureair-charged units such as shock absorber struts, hydraulic pressure accumulators, surge cylinders, andpneumatic systems. These valves have a special feature which warns of unreleased air pressure when thevalve is being separated from the outlet. Contact our customer service department for further informationon military and commercial adaptions. 1/2"-20 U.N.F.-3A threads for connection to container.
Schrader No. AN/MS No. Cap Core Working Pressure
4361S798
AN-6287MS28889-2
25252525
2300T 3,0005,000
These high-pressure inflating connections attach securely by hand or wrench to the valve cap threads of high-pressure valves. Can be fitted to gauging and inflating devices by a variety of methods. Various angles permiteasy attachment to hard to reach valves.
SchraderNo.
FitsThread
SizeAir Line
Connection
Max.Pressure
Rating (PSIG) Configuration
RecommendedMax. Torque
To Valve Mouth* Remarks
556
2755
6116
5784
.305-32
.305-32
.305-32
.305-32
1/8" NPT Male
3/8"-24 thread for 3/16" flare tubefitting, meets MS 33656E3
1/8" NPT Female
7/16"-20 thread for 1/4" flaretube fitting, meets MS 33656E4
3,000
3,000
3,000
5,000
Air line connection 90°to axis of valve
Air line connection 90°to axis of valve
Air line connection 70°to axis of valve
Air line connection 70°to axis of valve
50 in.-lb.
50 in.-lb.
30 in.-lb.
30 in.-lb.
Has core depressor pincopper sealing washer
Has core depressor pin,copper sealing washer
Hard fiber sealing washer
Hard fiber sealing washer
It may be necessary to replace sealing washers after a number of uses to insure sealing on valve mouth.
Tank Valves
Camel No.
Amflo No. NPT
EffectiveLength Pack
38-900-1038-906-10
701700*701-2701-42
1/8"1/8"1/4"1/4"
29/32"17/32"3/4"barbed
1 pack10 pack10 pack10 pack
SchraderNo. Descr.
StandardPack Stem Core Cap NPT
StemMaterial
For air tanks, steel barrels, compressors, and other pneumatic containers where dependable automatic airvalves are needed. Valves are equipped with standard valve core and sealing caps for operating pressures to200 PSI. These valves have NPT male threads and allow for external length variations by use of short coreonly or internal protrusion of core housing into container.
1468L-61498L-6
Tank ValveTank Valve
2525
1468-11498-1
8500T8500T
6300C6300C
1/8"1/4"
Brass/NPBrass
High Pressure Valves
*Display Package +Amflo No. 700 is available in 10 pk.
1468L-6
38-900
38-906
701-2
556/2755
6116
1498L-6
7984361S
Miscellaneous Valves
Miscellaneous/Standard Bore Air-Liquid/Agricultural ValvesMiscellaneous/Standard Bore Air-Liquid/Agricultural Valves
23/24
31-013-531-015-5
1315
1-3/8"1-3/8"
.406
.651
Tube Type Passenger Valves
Special compound cushion gum base allows bonding of valve to the tube usinghot or cold (chemical bond). 5 per pack.
Camel No.
TR No.EffectiveLength
ShankDiameter
31-336-100
Rim Hole Bushing
Used to reduce the size of large rim holes so TR-13 valve fits more snugly.100 per pack.
*Display Package.
31-013
31-015
31-336
Air-Liquid Core Housings & Accessories
Core Housing. Screws into air-liquid valves and extensions shown here. Features O-ring seal.34-963-10 (TR-CH-3) 10 per box
Nylon Rim Nut.34-282-25 100 per box
Fluid Adapter
Fits standard bore air-water valves (tube & tubeless), after core housing is movedto extension mouth.
Fluid Adapter Set. Permits fast filling of tires for ballast. Fits tube and tubelessvalves and extensions shown here (core housing removed). Includes extra bush-ings listed for standard bore valves and old 9251-type valves. Button valve on sidereleases air displaced by fluid. Hose connection is 3/4" standard garden hose.
34-955 1 per box
34-963
34-282-25
34-955
38-314
Valv
e Ex
tens
ions
25
Passenger Car Extensions
38-313-5038-313-25038-313-50038-313-1000
50 pack250 pack500 pack1,000 pack
Camel No. Packaging
Double Sealing Extensions. Valves have two O-rings for high pressure applications.
38-314-438-314-50
4 pack*50 pack
Chrome Plated Brass 3/4" Extensions. Long lasting chrome finish.
38-315-438-315-50
4 pack*50 pack
Chrome Plated Brass 1-1/4" Extensions. Long lasting chrome finish.
38-324-438-324-1038-324-50
4 pack*10 pack50 pack
Black Nylon 3/4" Extensions.
38-325-438-325-1038-325-50
4 pack*10 pack50 pack
Black Nylon 1-1/4" Extensions.
38-326-438-326-50
4 pack*50 pack
Black Plastic 1-1/2" Extensions.
Schrader valve extensions provide a seal against contaminants whileextending the valve mouth for convenient access. Fits standard .305-32"valve cap threads.
* Display package
38-313
38-326
38-324
Valve ExtensionsValve Extensions
26
Valve Extensions
Valve ExtensionsValve Extensions
Dual Wheel Valve Extension
Display pack of 2Bulk pack of 10
38-40038-400-10
7"7"
Effective Length PackagesCamel No.
Rubber 6.3" flexible extensions provide easy access to inner dual wheels onmotor homes and other vehicles with small dual wheels. Includes clamp tosecure hose to wheel. Installs with simple hand tools in minutes.
Standard Truck Extensions
3-1/16"6-1/16"5-1/16"1-3/8"4-7/16"1-13/32"2-7/323-1/8"4-1/8"
38-430-1038-432-1038-436-1038-472-1038-474-1038-475-1038-476-1038-477-1038-478-10
Schrader No. LengthCamel No.
Screws onto standard .305" - 32 valve cap threads to make valve mouth moreaccessible for air service.
*Display package
38-400
38-430
38-436
38-430
38-436
38-475
Valv
e Co
res
Valve CoresValve Cores
27
38-790
6035
Special Valve Cores
MoldedNitrile
BlackNitrile
1000-2000 psig (oiled)
70-2000 psig (dry)
0 to +165 100+38-805-100
38-810-100
SchraderNo.
CamelNo.
OperatingPressure
Range (PSI)
OperatingTemp.
Range (°F)
Opening Pressure(PSIG)
SealingMaterial
Plug / PlungerPackSize
Aircraft shock strut and hydraulic accumulator use. Meets specifications AN-809-1 and MIL-C-5499.
NaturalTeflon
BlackNitrile
1000-2000 psig (oiled)
70-2000 psig (dry)
0 to +165 70Hydraulic accumulator use.
Airplane
NaturalTeflon
WhiteSilicone
1000-400 psigpeaks of 500
-65 to +350peaks of +500
706035
General purpose high-pressure, heat-resisting applications. Meets specification MIL-V-27317 and TRC-4.
Standard Valve Cores
RedTeflon
RedSilicone
1000-200 psiapeaks of 300
-65 to +300peaks of +400
90
These valve cores all have .206"-36 threads and are compatible with existing USA, ETRTO and ISO standards.
Recommended for all truck, bus and commercial applications. Meets specification ZZ-V-25 and TR C-1.
GreenTeflon
BlackNitrile
1000-200 psiapeaks of 300
-40 to +225 6038-830-100
38-790-438-790-100
General purpose valve use. Meets specifications ZZ-V-25 and TR-C-1.
* 5 pack. **Display pack.
CAUTION: These products should not be used in applications which do not fully comply with recom-mended operating specifications. For use other than specified, or with media other than air or inert gaseswhen not specified, consult for manufacturer approval.
38-810
Plunger Pin
Plug GasketSpring Inside
Plunger Seat Washer
Valve Caps
Valve CapsValve Caps
28
Standard Valve Caps
CamelNo.
AmfloNo.
SealingWasherMaterial
OperatingPressure
Range (PSIA)
OperatingTemperatureRange (°F)
PackSize Description Finish
TRNumber
38-772-4*38-772-100
38-772B-100
38-600-4*38-600-100
941-100
940-100
NitrileNitrile
Nitrile
NitrileNitrile
0-2000-200
0-200
0-2000-200
-40 to +165-40 to +165
-40 to +165
-40 to +165-40 to +165
4*100
100
4*100
Same as No. 7572VDome-shaped top and guideon skirt for easy applicationto valve threads. Same as No. 7572V
Same as No. 2316CAll purpose cap with screw-driver top for removing andinserting valve cores. Hasguide on skirt for easyapplication to valve threads.
N/PN/P
Black
N/PN/P
VC3VC3
VC3
VC2VC2
Fit .305"–32 Threads on Standard Type Valves
38-750-100
38-714-100
38-712-4*38-712-100
Nitrile
Neoprene
NitrileNitrile
0-250
0-5000
0-2500-250
-40 to +200
-65 to +160
-40 to +200-40 to +200
100
100
4*100
Heavy-duty cap with specialheat resistant rubber washer.Has guide on skirt for easyapplication to valve threads.Made from hexagon rod forwrench application. Maximumtorque 10 inch-pounds. Hasspecial sealing washer forhigh pressure use. Conformsto Military Spec. MIL-C-5000and MS-20813.Same as No. 5998For use on chrome sleeve andhigh performance valves.
VC 5
38-505*38-505-100
38-505-500
943-1000-1000-1000-2000-100
0 to +1000 to +100-40 to 1650 to +100
4*100100 †
500
Same as No. 660VBlack flexible plastic cap hasno sealing unit.Same as No. 660V
BlackBlackBlackBlack
VC 8VC 8
VC 8* Display pack. **5 pack. †Has sealing unit. For use on cars, trucks and commercial applications.
N/P
Yellow
ChromeChrome
Heavy Duty and Heat Resisting Caps
Plastic Caps
CAUTION: Theseproducts should notbe used in applica-tions which do notfully comply with rec-ommended operatingspecifications. For useother than specified,or with media otherthan air or inert gaseswhen not specified,consult for manufac-turer approval.
38-77238-712 38-505 38-714
Properly inflated tires can:
40-406
40-408
40-399
40-395
• Reduce chances of blowouts• Always check tire pressure when tires are cold
• Improve gas mileage up to 10%• Improve tire life up to 30%
“Pen
cil T
ype”
Pre
ssur
e Ga
uges
“Pencil Type” Pressure Gauges“Pencil Type” Pressure Gauges
29
Pocket Gauges
40-400
Amflo No.Camel No.
Pocket Gauge. Calibrated from 10 to 50 PSI in 1 PSI increments and 75 to 325 inKPA increments. Nylon indicator bar. Chrome plated barrel.
5 pack
40-408
Straight-On Pocket Gauge. Calibrated from 10 to 50 PSI in 1 PSI increments and 75 to325 in KPA increments. Silver anodized barrel with push-on head and nylon indicator bar.
Dial Gauges
Low Pressure Dial Gauge. For go-carts, air shocks, all low pressure tires, racing tires and other low pressure applications. Rubber bumper protects dial case. Slide valve allows locking-in tire pressure afterremoval from tire. Calibrated 0-16 PSI and in KPA.
906AD*40-406
High Pressure Truck Gauge. Calibrated 20 to 120 PSI in 2 PSI increments and 150 to800 in KPA increments. Silver anodized finish.
Quantity
1 pack
1 pack
5 pack
1 pack
40-435Dial Gauge with Bleeder. 0-60 PSI.
10 pack
40-399
Low Pressure GaugeUse with air shocks and low pressure tires. Calibrated from 1 to 20 PSI in 1/2 PSI increments and 10 to 130in KPA increments. Nylon indicator bar and anodized barrel.
1 pack40-395
Tread Depth GaugeSteel indicator bar. Calibrated from 0 to 1" in 1/32". With pocket clip.
1 pack
40-400
High Pressure Tire Gauge. Calibrated fro 20 to 120 PSI.40-412
Heavy-Duty Pressure Gauges/Gauge Displays
Heavy-Duty Pressure Gauges/Gauge DisplaysHeavy-Duty Pressure Gauges/Gauge Displays
30/31
Truck and Bus Pressure Gauge
902D (5 pack)40-403
Amflo No.Camel No. Schrader No. Quantity
Our best selling heavy duty gauge with dual foot chuck. Calibrated 10 to 150 PSIin 2 PSI increments on nylon bar.
980 Series Dual Range Master Dial Gauges
0-600-160
1 PSI2 PSI
10 KPA20 KPA
0-4000-1100
980-60980-160D*
Swivel dual foot with hose. Extremely accurate. Dual calibrated in PSI and KPA.Available boxed or on display card.
Dial Gauges
903D*Same as above, but has unbreakable aluminum indicator bar.
908D*40-407
Pocket Type Dual Head Gauge. Calibrated from 20 to 120 PSI, in 2 PSI increments,durable chrome plated finish.
980-160D*
Dual Range Dial Gauge. 0-160 PSI in 2 PSI increments. Similar to 980 series (below). 1 pack.
RangePSI
SmallestDivision
RangeKPA
SmallestDivisionAmflo No.
904D*93509350-D
1 pack100 pack10 pack
40-40240-402-100
Air/Liquid Tractor Gauge. For tractor tires that contain ballast. Calibrated 10-50PSI, silver anodized finish.
1 pack
1 pack100 pack
1 pack
40-052
Reverse 30° dual foot head makes it easy to read pressure on inner dual wheels.Calibrated 10 to 150 PSI, with metal bar. Chrome finish. Carded.
1 pack
*Display Package
40-850 20 Piece “Increase Your Gas Mileage” Gauge Display
Tire Gauge DisplaysEye catching displays includes 10 or 20 standard tire gauges in vibrant colors –red, blue, black, chrome and metallic green. Designed to accommodate peghook or counter top display, wherever your store traffic is heaviest. The gaugesare calibrated on 4 sides 10-50 PSI in 1 lb.
40-403
903D
40-407
962D
980-160D
40-402
WARNING: For best results check tire pressure whenthe tires are cold or when the vehicle has not been driven forseveral hours. Readings taken after prolonged driving athigh speeds will increase tire pressure causing a false read-ing. Check tire pressure at least once a week or as neces-sary. Consult your Owner’s Manual for the recommended airpressure for your tires. These gauges have been accuratelycalibrated and inspected. For continued accuracy, take careof them as you would any precision instrument.
40-850
Tire
Ser
vice
Too
ls
Tire Service ToolsTire Service Tools
32
41-067
41-469
4-Way Tire Valve Repair Tool
922D*922 (Amflo 10 pack)
41-067*
Amflo No.Camel No.
Repairs core and stem threads. Has core screwdriver and broken core extractor. 1 pack.
Valve Core Extracting Tool
921 (Amflo 10 pack)41-469*All metal construction. 1 pack.
Valve Core Extractor With Plastic Handle
41-444 (1 pack)
Tube Deflating Aspirator
926 526241-460
Removes air quickly by creating a vacuum effect when air is applied to threadedchuck. 1 pack.
Valve Fishing Tool
41-466
Centers valve in rim hole while mounting tires. For use on .453" and .625" rim holes.1 pack.
Tubeless Tire Inserting Tool
41-506Used for installation and removal of rubber snap-in valves. 1 pack
Double Use Tool
41-068For deflating tire tube and core removal. 1 pack
Cap and Core Tool
8769A
Grip and holds core bridge and cap to provide means of inserting cores in hard toreach valves.
*Display Package
41-444
41-466
41-506
8769A
41-460
41-068
Inflator Gauges & Hoses
Inflator Gauges & HosesInflator Gauges & Hoses
33
150
151
100
101
135
180D
97-329
WARNING: For best results, check tire pressure when tires are cold or when vehicle has not been driven for several hours. Readings takenafter prolonged driving at high speeds will increase tire pressure causing a false reading. Check tire pressure at least once a week or asnecessary. Consult your owner’s manual for the recommended air pressure for your tires. Gauges have been accurately calibrated andinspected. For continued accuracy, take care of them as you would any precision instrument.
Use ONLY oil free and water free compressed air. Maximum pressure of air source should NOT exceed 220 PSI. DO NOT use for inflating or checking pressure on air/liquid tires or other tires containing corrosive materials.
Standard Series
150D150 (boxed)
Amflo No.Camel No.
(Amflo 150 type) Features chrome platedcastings with brass internal parts for long life.Solid brass bar is calibrated 10 to 90 PSI in 2 PSI increments.Straight-On Tapered Chuck Inflator. With 12" hose. Standard unit for commercial applications. 1 pack.
151
Swivel Dual Foot Chuck Inflator. With 12" hose. Use on motor homes andother vehicles with smaller dual wheels. 1 pack.
Heavy-Duty Series
(Amflo 100 type.) Heavy chrome plated castingswith protective sleeve over dial tube. Plated steelhandle is riveted to body. Solid brass bar is cali-brated 10 to 120 PSI in 2 PSI increments.
100D100 (boxed)
Straight-On Tapered Chuck Inflator. With 12" hose.
101D101 (boxed)
40-591
Swivel Dual Foot Chuck Inflator. Has 12"hose. For use on motor homes and othervehicles with smaller dual wheels.
Highly Accurate Dial Inflator. Easy to read dialis calibrated 0 to 160 PSI. Unit is protected with aheavy rubber cushion “bumper.” The taperedchuck and swivel dual foot make getting into tightspots easy. A must for racing tires and truckfleets. 1 pack
135
Inflator Gauge with Sight Glass. Calibrated 12to 120 PSI. Sturdy cast aluminum body. Hoseis 12" long with plated dual foot chuck. 1 pack.
180D
Cartridge for sight glass (as listed above).1 pack.97-329
Infla
tor G
auge
s, H
oses
& P
ress
ure
Equa
lizer
Inflator Gauges, Hoses & Pressure EqualizerInflator Gauges, Hoses & Pressure Equalizer
34
Amflo No.Camel No.
Master Air & Replacement Hose
Replacement Hose Assemblies for Air Line Inflators Gauges. Hose assemblies on thispage have standard 3/8" - 24 UNF male threads and will fit inflator gauges in addition tomany other products. Hose is flexible, oil and ozone resistant rubber. 1 pack.
3910S3911
110112113153159
12" whipend no chuck 1/4" NPT swivel end.12" hose with straight chuck. Display package.12" hose with dual foot chuck.Replacement indicator bar for (150 series) inflator gauge. 1 pack.Replacment valve unit for (150 series) inflator gauge. 1 pack.
Standard Bore Inflating GaugeReplacement Hose
Inflates and checks pressure of passenger cars, motorcycles and trucks. Has a five foot hose length.Dual calibrated 10 to 170 PSI and .7 to 12 bar. Calibrated in two pound increments. 1 per box.110
112
3910S
Visualizer II® Pressure Equalizer
Visualizer II‚ - Dual Tire Pressure Equalizer – Extend Tread Life up to 30%Visualizer II, state-of-the-art tire pressure equalizer allows air to flow freely betweendual tires to maintain equal Inflation. Visualizer II connects tire valves to an equaliza-tion module that equalizes pressure between inside and outside tires. Unit allowsvehicle operator to visually check for correct tire pressure.
• Chrome plated housing• Heavy-duty construction• Factory preset tire inflation levels• Provides accurate callibration• Easy installation• Single valve inflation• Automatic safety cut-off• Color-coded pressure indicators• Stainless steel braided hose with nickel-plated fittings
Eliminate costly maintenance and wear problems. Install Visualizer IIdual tire equalizer on tractors, trailers and medium-duty trucks, evenones with chrome hub caps. Visualize the benefits of proper and balanced dual tire inflation on your fleet.
• Increases fuel mileage• Reduces blowout risk• Decreases tire maintenance• No valve core removal required• Extends tread life• Improves traction• System removal not required for tire service
Unit is color-coded to provide proper inflation information. RED under inflation, GREEN indicates proper inflation and YELLOW over inflation.
Without Visualizer II With Visualiizer IIAs tires heat up, tire pressures Equal tire pressures maintainedincrease unequally for optimal performance
Visualizer II® Mounting KitsVisualizer II® Mounting Kits
35
Mounting Kits
How to Order Visualizer II®
Visualizer II is available in 5 pound increments – from 60 psi tp 120 psi.• Specify the psi setting required: 1125-90, 1125-95, 1125-100,
1125-105, 1125-110, 1125-115 0r 1125-120.• Includes two hoses to connect both tires to Visualizer II.• For more Visualizer II information, contact Schrader-Bridgeport customer service.
1125 Kit 3 Stainless steel replacement hose kit.
1125 Kit 6 Strap bracket for Mack, International tractors and others with 3/4" axle bolts.
1125 Kit 10 Tractor and trailer axles with hubodometer.
1125 Kit 12 5/8" universal application strap bracket
1125 Kit 15 Center hub mount for most tractor and trailer axles with 5/8" hub bolt holes including Kenworth, Peterbilt, Navistar and others.
1125 Kit 18 Wheel mount for all wheels with hub-piloted wheel bolts and chrome hub caps or hubodometer with 7/8" bolt holes.
1125 Kit 19 Wheel mount for all wheels with stud piloted wheel bolts and chrome hub caps or hubodometer with 1 1/8" bolt holes.
1125 Kit 21 For truck and trailer axles with oil seals.
Visualizer II offers specialized kits to meet the requirements of most vehicles.
LIMITED WARRANTY: Schrader-Bridgeport warrants its products to be free from defects in material and workmanship for a period of 30days from the date of purchase. This warranty shall be null and void if product is improperly installed or altered.
Kit No. Description
Air Line Chucks for Inflator Gauges OnlyChucks have no shut-off valve and will notwork on live air lines.
Air Line Chucks for Live Air Lines OnlyChucks have a built in shut-off valve and willnot work on inflator gauges.
Camel No. Amflo No.Combination Chuck 50-061W/401 1/4" I.D. hose barb.
1/4" NPTF Ball Foot Chuck 104D (Brass)104 (10 pack)
50-062 104ZND (Zinc)
1/4" NPTF Ball 50-621Foot w/ Clip 104CAD (Brass)
104CA (Brass 10 pack)
1/4" NPTF Angle Chuck
1/4" NPTF Lock-On Chuck119 (10 pack)
1/4" NPTF Dual Safety 118DLock-On Chuck
1/4" NPTF Straight Chuck 126 (10 pack)
1/4" NPTF Dual Foot 50-065 109DChucks - Angled
1/4" NPTF Dual Foot Straight 50-435 108Chuck 121 (12")
Repair KitsDual foot repair kit, 1 kit per bag, 97-352Dual foot washers, 10 per bag 97-353Ball foot chuck repair kit, 1 per bag 97-350Ball foot washers, 10 per bag 97-351
Camel No. Amflo No.
104G (Brass 10 pack)
104GCA (Brass 10 pack)
105 (10 pack)
120 (10 pack)
117 (1 pack)
127 (10 pack)106 (Barb)
107 (1 pack)
97-312 97-353
97-351
Air C
huck
s
Air ChucksAir Chucks
36
204-30A
212
217D
219D
204-30-3
208
204-30ST
Safety Blow Guns
Safety Blow GunsSafety Blow Guns
37
WARNING: Blow guns on this page are designed for use on regulated compressed air lines only. Inlet pressure must not exceed 150 PSI. Thesesafety blow guns utilize special tips that prevent pressure buildup if tip is blocked or “dead ended.” Complies with OSHA 1910.242b and 1910.95requirements when used on a regulated air line of 150 PSI or less. Use personal protective equipment, (safety goggles) and/or chip guards, barri-er screens and ear protection. Failure to follow these specifications and directions exactly may result in personal injury and/or property damage.
Safety Blow Guns
204-30AD*204-30A (boxed)
51-124
Amflo No.Camel No.
Safety blow guns shown on this page have safety tips which prevent buildup of tip pressure in theevent the outlet is obstructed or “dead ended." In compliance with OSHA 1910.242b and 1910.95requirements when used on an air line of 150 PSI or less. Use personal protective equipment,safety goggles, chip guarding barrier screens and ear protection.
1/4" NPTF inlet and 1/8" outlet.Tamper-proof tip swivels and cannot be removed. Tip pressure will not exceed 30 PSIwhen inlet pressure is 150 PSI or less. Installed restrictors reduce tip pressure to 30 PSI.1 pack.
204-30
Cross-Drilled Tip Bypass. Features solid tip construction. Restrictors reduce tip pressureto 30 PSI. Tip pressure will not exceed 30 PSI when inlet pressure is 150 PSI or less. 1 pack.
212 (boxed)
Strata-Flo Blow Gun. Special design concentrates air into a powerful stream. Nothrough-hole design prevents dangerous pressure buildup and reduces air turbulencemaking it much quieter than most blow guns. 1 pack.
Automotive SeriesIndustrial Series
217D*219D*51-119
Adjustable Pocket Blow Gun. Knurled tip provides positive grip. Ten packs are avail-able in Amflo also. 1 pack.
204-30STD*204-30ST (boxed)
Variable Flow Star Tip Blow Gun. Innovative design lets trigger control air flow for alltypes of jobs. Star tip prevents dangerous pressure buildup and is very quiet. Brassinlet and valve. Swiss Made. 1 pack.
208D*208 (boxed)
Standard Safety Blow Gun. Slotted venturi tip prevents pressure buildup. Venturieffect draws more air than standard blow guns. 1 pack.
204-30-6Safety Blow Gun with 6" Extension. Same as 204-30-3D, except has 6" extension. 1 pack.
204-30-12Safety Blow Gun with 12" Extension. Same as 204-30-3D, except has 12" extension. 1 pack.
*Display Package
206-30D
226D
220TD
200K
200
211D
205ATSafe
ty B
low
Gun
s
Safety Blow GunsSafety Blow Guns
38
Standard Blow Guns
200D200 (boxed)
Amflo No.Camel No.
Standard Series Blow Guns. 1/4" NPTF inlet and 1/8" NPTF outlet. Rugged construc-tion with hang hook. Accepts a full range of accessories. 1 pack.
201D201
51-123
Rubber Tipped Blow Gun. Provides leak proof seal for blowing out lines. Rubber tip isexcellent for body shops as it will not mar painted surfaces. 1 pack.
200K51-004
Deluxe Blow Gun Kit. Popular kit containing standard blow gun and 4 tip accessoriesin display package. 1 pack.
Economy Blow Gun. Press side to regulate air flow. Excellent for inflating balloons. 1 pack.
205ATD205AT (boxed)
Angle Tip Blow Gun. Heavy-duty construction and rubber tip. Excellent for blowing out auto-matic transmissions. 1 pack.
Heavy-Duty Series Blow Guns
206-30D*
Heavy-Duty Blow Gun. Built for rugged applications. Extra strong casting provideslong service life. Has 1/4" NPTF inlet and 1/8" nozzle thread. 1 pack.
205D*205 (boxed)
Heavy-Duty Blow Gun. Use in construction and other rugged applications. Standard 1/8"NPT nozzle thread. 1 pack.
226 (boxed)
211 (boxed 10 pack)
Booster Blow Gun. Delivers extra wide spray pattern. Additional air is drawn throughholes around nozzle. 1 pack.
Siphon Spray Guns
220TD*220T
51-536
Blows air/liquids. Excellent for cleaning engines. Complete with 8 feet plastic tubing.1 pack.
223TD*
Blows air/liquids to clean auto engines. Contains control valve to regulate density ofmist. Complete with 8 feet plastic tubing. 1 pack.
CAUTION: Blow guns listed on this page do not have a safety bypass to prevent tip pressure buildup inthe event of blockage. These blow guns comply with the requirements of OSHA 1910.242b when used ona regulated line of 30 PSI or less. Use male threaded plug (1/4" NPT). Make sure plug is securely tight-ened to blow gun. Do not retap or modify the threads of the blow gun for a nonstandard plug. Do not pointblow gun tips at people or animals. Keep tip pointed away from your body. Always wear eye and ear pro-tection when using blow guns. Failure to follow these specifications and directions exactly may result inpersonal injury and/or property damage.
Heavy-Duty Series Blow Guns
*Display Package
201
Blow Gun Accessories
Blow Gun AccessoriesBlow Gun Accessories
39
Blow Gun Accessories
Amflo No.Camel No. Size
Blow gun tips and extensions on this page have 1/8" NPT male threads. Read warning statement below before using blow gun accessories.
6" extensions200-E6Standard Chrome Plated Extensions. 1/4" tubing. 1 pack.
200NTD*
Five Pack of Blow Gun Tips. Popular assortment of 5 stainless steel tubes withchrome plated, brass fittings.
.134"
.095"
.065"
.050"
.042"
200NT-1200NT-2200NT-3200NT-4200NT-5
Replacement needles:
8" extensions200F8Flexible Metal Extensions. Use for air or coolant lines.
6"12"
204E6204E12
Safety Extensions. Extensions have safety bypass and cannot be dead ended.1 pack.
200T (boxed/10)Standard Replacement Tip. Use on Amflo blow guns 200 and 205, and on Camel 51-122.
202D (Display pack)202 (Boxed/10)
Replacement Rubber Tip Nozzle. For making air tight connections for blowing outlines, or cleaning delicate molds where a metal tip might scratch the mold.
209 (10/boxed)
Safety Nozzle. Additional air is drawn through side holes and prevents buildups.Replacement for Amflo 208 and Camel 51-342. (Amflo design is slotted).
213Strata-Flo Tip. Improves performance, reduces air consumption and noise. 1 pack.
221 (1/pack)
Siphon Nozzle Tip. Use with any blow gun having 1/8" NPT female nozzle port. Barbed extension will fit tubing or hose with 1/4" ID.
40-205RKHeavy Duty Blow Gun Valve Repair Kit. Contains valve stem, O-rings, spring and nut.1 pack.
WARNING: Do not use needle tip extension on compressed air lines where air pressure exceeds30 PSI. Do not block the tip. Always wear eye protection and personal protective equipment whenusing blow guns. Do not point tip at people or animals when using compressed air, keep the tippointed away from your body. Failure to follow these specifications and warnings exactly may resultin personal injury and/or property damage.
Air Flow Data To assist you in selectingthe blow gun best suited for your applicationrefer to the chart below. It shows a comparisonof actual compressed air consumed in CFM, toair delivered at tip end in CFM. Flow data isbased on inlet pressure of 100 PSI.
AmfloNo.
Air (CFM)Consumed
Air (CFM)Delivered
200201205211204-30A208226212206-30
81191081126614
8119101116804021
200T
200-E6
204E12
221
*Display Package
Filte
rs, R
egul
ator
s, L
ubric
ator
s
Filters, Regulators, LubricatorsFilters, Regulators, Lubricators
40
Compressed Air SystemsTo set up an efficient air system, several things should be considered: Proper flow of air by using theright size equipment; filters should be used to remove foreign matter from the air to prolong tool life;regulators should be used where air needs to be regulated to maintain proper pressure; and lubricatorsshould be used where pneumatic air tools require lubrication.
Air Preparation Equipment
Filters
Contaminants from the atmos-phere (dust, moisture, pollutants)are drawn into the air system atthe compressor intake. Sludge,oil and foreign matter may beadded to the air systems by thecompressor itself. Contaminatedair can interfere with the air driv-en device operation and, in time,damage it. Compressed air fil-ters, installed upstream from theair driven device, remove con-taminants as well as most watercondensate from the flowingcompressed air. Some applica-tions require extremely clean airvirtually free of oil aerosols,vapors, and hydrocarbons. Oilremoval (coalescing) and oilvapor removal (adsorbing) filtersare used in these applications.
Regulators
Air driven devices are designed towork at a certain pressure. Mostdevices will operate at pressuresin excess of that recommended.However, operating at higherpressures can cause excesstorque, force and wear and canwaste compressed air. The bestoperation and life of the devicecan be obtained by using the cor-rect pressure level. A regulatoris used to reduce and maintainthe pressure at a level required by the device.
Filter/Regulators
A filter/regulator combines thefunctions of a filter and a regula-tor, as described in the previousparagraphs, into one compactspace-saving unit.
Lubricators
Most moving parts require sometype of lubrication. The efficiencyof cylinders, valves and airmotors can be greatly improved if they are supplied with therequired lubrication. Air drivendevices can be lubricated byusing an air line lubricator, adevice for adding lubrication oil inaerosol form into the com-pressed air line. The air passingthrough the lubricator transportsthe lubricant to air tools, cylin-ders or other air driven deviceswhere the lubricant is depositedon moving and sliding surfacesto reduce friction and wear.Most lubricators have a propor-tional oil delivery feature whichautomatically provides a nearlyconstant oil-to-air ratio over awide range of air flows.
Filters, Gauges, RegulatorsFilters, Gauges, Regulators
41/42
Gauges
General Purpose Pressure GaugesPressed steel case with shatterproof crystal and brass fitting. Used for air, water, oil, or other fluids which are compatible with brass and bronze. Available boxed or in display packs. Nominal accuracy 3-2-3%. 1 pack.
BOTTOM MOUNT GAUGE
Dial Diameter
2"2"2"2"
PipeThread
1/4" NPT1/4" NPT1/4" NPT1/4" NPT
RangePSI
0-150-600-1600-300
Amflo No.
1012-151012-601012-1601012-300
BACK MOUNT GAUGE
Dial Diameter
1-1/2"1-1/2"
2"2"2"
PipeThread
1/8" NPT1/8" NPT1/8" NPT1/4" NPT1/4" NPT
RangePSI
0-600-1600-1600-1600-300
Amflo No.
1101-601101-1601111-1601112-1601112-300
MiniaturePorts ..................................1/4"Flow SCFM .........................21
PortSize
BodySize
Poly Bowl
Mini 1/4" 3000
Filters - Construction
Parts & AccessoriesBodySize
MountingBracket
5 µmElement
Mini 3062 3073 3076
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Polycarbonate Bowl: 150 psigMaximum Temperature: 125° F
WARNING: Units in this catalog are intended for use in industrial compressed air systems only. Do not use where pressureor temperature may exceed maximum rated operating condition. See specifications. Use metal bowl on applications where aplastic bowl might be exposed to substances that are incompatible with polycarbonate. These filters are not designed for usewith fluids other than air, for non-industrial application, or for life support systems.
*Approximate flow at 90 psig inlet pressure and 5 psid pressure drop.
SCFM = “Cubic ft/min” at Standard Ambient Condition Gauges Sold Separately
Regulators
MiniaturePorts ..............................1/4"Flow SCFM ......................15
PortSize
BodySize
WithoutGauge
PlasticPanel Nut
Mini 1/4" 3100
Parts & AccessoriesBodySize
MountingBracket
Mini 3076 3161 3166
SpecificationsFluid: Compressed AirMaximum Inlet Pressure: 250 psigMaximum Temperature: 125º FGauge Port: 2-1/8" NPTOutlet Range: 5 - 125 psi
Filters, Regulators, Lubricators
Filte
rs
FiltersFilters
44
StandardPorts ....1/4"-3/8"-1/2"-3/4"-1"SCFM.... 70 -150 -425
MetalBowl
Filters - Mini, Compact, Modular, Standard
Parts & Accessories
BodySize
PortSize
PolyBowl
3/8" 1/4" 4010A-99 4011A-993/8" 3/8" 4020A-99 4021A-993/8" 3/8" 4024A-99
(w/ auto drain)
1/2" 1/2" 4030 40311/2" 3/4" 4032 4040
Hi Flow1" 3/4" 4041*1" 1" 4050*For Auto Drain order 40464096 Manual Drain Kit
3/8" 4066A-99 4063A-99 4074A-99 4079A-99 4071A-991/2" 4093 4092 4095 4094 47721" 4068 4065 4272 4090
40 µmElement
5 µmElement
PolyBowl
BodySize
MountingBracket
MetalBowl
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig (10.3 bar)Metal Bowl: 250 psig (17.2 bar)Maximum Temperature –Transparent Bowl: 125ºF (52ºC)Metal Bowl: 175ºF (79ºC)
Bowl O-RingBody Size Sight Glass Auto Drain
3/8" 4782 4277A 40701/2" 47831" 4781 4278 4046
Auto Drain – 4060Manual Drain – 4096
Gauges Sold Separately
Filters, Regulators
Filters, RegulatorsFilters, Regulators
45
StandardPorts .......................3/8"-1/2"Flow SCFM .............75 150
BodySize
Coalescing Filters
Parts & AccessoriesPolyBowl
MetalBowl
BodySize
Rplc.Sight Glass
MountingBracket
PolyBowl
MetalBowl
PortSize
1/2" 1/2" 4033
1/2" 4097 4095 4094 4772 4278 4783
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig (10.3 bar)Metal Bowl: 250 psig (17.2 bar)Maximum Temperature –Transparent Bowl: 125°F (52°C)Metal Bowl: 150°F (66°C)
.01pmElement
MiniaturePorts ..............................1/4"Flow SCFM .................... 20
CompactPorts .......................1/4"-3/8"Flow SCFM ............. 50
StandardPorts .....1/4"-3/8"-1/2"-3/4"-1"SCFM.... 70 -150 -425
PortSize
WithoutGauge
BodySize
BodySize
With Gauge
WithoutGauge
Mini 1/4" 4100/4102* 4100D
Regulators
Parts & Accessories Parts & Accessories
Parts & Accessories
PanelNut
BodySize
Rplc.Knob
Reg. RepairKit
WithoutGauge
BodySize
Mini 4160 4161 4166 4790
PortSize
1/4" 1/4" 41191/4" 3/8" 4118
PortSize
3/8" 1/4" 4115A-99
3/8" 3/8" 4125A-99
1/2" 1/2" 41351/2" 3/4" 41451" 3/4" 41411" 1" 4155
1/4" 4760 4763 4757 4791
3/8" 4162A-99 4778 4167A 47921/2" 4772 4773 4776 47931" 4165 4169 Non-Rplc
SpecificationsFluid: Compressed AirMaximum Inlet Pressure: 300 psigTemperature Range –Mini: 0º to 150º FAll Others: 0º to 175ºFGauge Port: 2-1/8" NPT (full flow)Outlet Range: 5 - 125 psi
SpecificationsFluid: Compressed AirMaximum Inlet Pressure: 300 psigTemperature Range: 0º to 150º FGauge Port: 2-1/8" NPT (full flow)Outlet Range: 5 - 125 psi Specifications
Fluid: Compressed AirMaximum Inlet Pressure: 300 psigTemperature Range: 0º to 175º FGauge Port: 2-1/4" NPT (full flow)Outlet Range: 5 - 125 psi
BodySize
MountingBracket
w/Panel
Reg. Repair Kit
PanelNut
Rplc.Knob
MountingBracket
w/ Panel
PanelNut
Reg. RepairKit
BodySize
Rplc.Knob
MountingBracket
* Non-Repairable Regulator
BowlO-Ring
Gauges Sold Separately
Lubr
icat
ors
LubricatorsLubricators
46
MiniaturePorts ...............................................1/4"SCFM...............................................5
StandardPorts ..........1/4"-3/8"-1/2"-3/4"-1"SCFM.......... 35 -150 -425
PortSize
BodySize
BodySize
Poly Bowl
Mini 1/4" 4200
Lubricator - Microfog
Parts & Accessories
Parts & Accessories
PolyBowl
MetalBowl
Mini 4264 4269 4160 4171 4794 4780
PortSize
3/8" 1/4" 4215A-993/8" 3/8" 4225A-99 4226A-991/2" 3/8" 42181/2" 1/2" 4235 42361/2" 3/4" 4245 42461" 1" 4255
3/8" 4265A-99 4269 4071A N/A 4283 4795 47821/2" 4285 4286 4772 4773 4283 4284 4796 47831" 4272 4090 N/A 4283 4797 4781
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig Maximum Temperature –Transparent Bowl: 125°F Metal Bowl: 175°F
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig
Maximum Temperature –Transparent Bowl: 125°F Metal Bowl: 175°F
Adj.Dome
SealKit
FillPlug
BowlO-Ring
Mount.Bracket
MetalBowl
PanelNut
BodySize
PolyBowl
FillPlug
BowlO-Ring
Mount.Bracket
MetalBowl
SealKit
BodySize
PolyBowl
StandardPorts .....1/4"-3/8"-1/2"-3/4"-1"SCFM..... 35 -150 -425
BodySize
Lubricator - Oil Fog
Parts & Accessories
PolyBowl
MetalBowl
PortSize
3/8" 1/4" 4210A-99 4211A-99 3/8" 3/8" 4220A-99 4221A-991/2" 1/2" 4230 42311/2" 3/4" 4240 42411" 1" 4242 4250
3/8" 4265A-99 4270A-99 4071A-99 4282 4795 47821/2" 4285 4286 4772 4282 4796 47831" 4272 4090 4282 4797 4781 4096
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig
Maximum Temperature –Transparent Bowl: 125°F Metal Bowl: 175°F
Adj.Dome
W/O’RingFill
PlugBowl
O-RingDrain
KitMount.Bracket
MetalBowl
BodySize
PolyBowl
Gauges SoldSeparately
MiniaturePorts ..............................1/4"SCFM ............................. 20
StandardPorts .....1/4"-3/8"-1/2"-3/4"-1"SCFM..... 75 -150
PortSize
BodySize
Poly Bowl
MetalBowl
Mini 1/4" 4300
Piggyback Filter/Regulator
Parts & Accessories Parts & Accessories
BodySize
PortSize
PolyBowl
3/8" 1/4" 4310A-99 4311A-993/8" 3/8" 4320A-99 4321A-991/2" 1/2" 4330 43311/2" 3/4" 4340 4341
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig Maximum Temperature –Transparent Bowl: 125°F Metal Bowl: 175°F Gauge Port: 2-1/8" NPT (full flow)Outlet Range: 5 - 125 psi
SpecificationsFluid: Compressed airMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig Maximum Temperature –Transparent Bowl: 125°F Metal Bowl: 175°FGauge Port: 2-1/4" NPT (full flow)Outlet Range: 5 - 125 psi
PolyBowl
Metal Bowl
BodySize
40 µmElement
BowlO-Ring
Rplc.Knob
MountingBracket
1/4" 4062 4073 4078* 4160 4166
BodySize
1/4" 4790 4780
*Replacement metal bowl has an auto drainand no sight glass.
PolyBowl
Metal Bowl
BodySize
40 µmElement
Reg.Repair Kit
Reg.Repair Kit
MountingBracket
3/8" 4066A 4074A-99 4079A-99 4162A-99 4167A1/2" 4093 4095 4094 4772 4776
BowlO-Ring
Rplc.Knob
BodySize3/8" 4792 47821/2" 4793 4783
Gauges Sold Separately.
Filters, Regulators
Filters, RegulatorsFilters, Regulators
47
Filte
rs, R
egul
ator
s, L
ubric
ator
s
Filters, Regulators, LubricatorsFilters, Regulators, Lubricators
48
MiniaturePorts ..............................1/4"SCFM..............................5
StandardPorts ....1/4"-3/8"-1/2"-3/4"-1"SCFM.... 75 -150 425
PortSize
BodySize
Poly Bowl
PolyBowl
MetalBowl
Mini 1/4" 4405
Regulator - Filter - Lubricator
Parts & Accessories
Parts & Accessories
BodySize
PortSize
3/8" 1/4" 4410A-99 4411A-993/8" 3/8" 4420A-99 4421A-991/2" 1/2" 4430 44311/2" 3/4" 4440 44411" 1" 4450
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig Maximum Temperature –Transparent Bowl: 125°F Metal Bowl: 175°F Gauge Port: 2-1/8" NPT (full flow)Outlet Range: 5 - 125 psi
SpecificationsFluid: Compressed AirMaximum Inlet Pressure –Transparent Bowl: 150 psig Metal Bowl: 250 psig Maximum Temperature –Transparent Bowl: 125°FMetal Bowl: 175°F Gauge Port: 2-1/4" NPT (full flow)Outlet Range: 5 - 125 psi
BodySize
PolyBowl
MetalBowl
Mini 4066A-99 4063A-99 4166 4790 4780 4794
FILTERS
PolyBowl
MetalBowl
LUBRICATOR
4264 4269Mini 4073 4078
BowlO-Ring
FillPlug
Reg.Repair
Kit
5 µmElement
RplcKnob
BodySize
40 µmElement
PolyBowl
MetalBowl
BodySize
FILTERS
PolyBowl
MetalBowl
LUBRICATOR
4265A-99 42694285 4286
4272
4074A-99 4079A-994095 4094
4272
3/8"1/2"1"
Reg.Repair
Kit3/8" 4066A-99 4063A-99 4071A-99 4167A 4795 4782 47921/2" 4093 4092 4770 4776 4796 4783 47931" 4068 4065 4165 4169 4797 4781
BowlO-Ring
RplcKnob
Mount.Bracket
5 µmElement
FillPlug
BodySize
40 µmElement
Gauges Sold Separately.
51
Filters, Regulators, Lubricators
Desiccant Dryers
APPLICATION: Compact Desiccant Dryers have been engineeredto deliver extremely dry compressed air to protect pneumaticallyoperated equipment from the adverse effects of moisture. Thecombination of efficient performance and compact size make themideally suited for applications when dry air is needed.Maximum working pressure 300 PSI.
DESICCANT DRYER DUTY CYCLE • % OF USAGE
MODEL NUMBER56-081
25% 33% 59% 100%20* 15* 10* 5*
*Estimated hours of use before desiccant needs replace-ment or regeneration using the below assumptions.Desiccant life will be shorter at higher temperatures andhigh humidity.
ASSUMPTIONS:A regular filter with automatic drain and an oil removalfilter are used as a prefiltering system immediatelyahead of the desiccant dryer. A regular filter may berequired after the desiccant dryer to remove any desic-cant dust.
Initial Pressure = 100 PSIGAmbient Temperature = 65° FRelative Humidity = 80%Inlet Dewpoint Temperature = 50° F (This is a factorof ambient temperature and relative humidity).
SPECIFICATIONS:
Maximum Rated Operating Conditions:Metal Bowl with Sight Glass: 250 PSIG (17.2 Bar);120° F (48° C)FLUID: Compressed Air OnlyPORT SIZE: 1/2"
FILTER ELEMENTS:Internal Inlet Filter - 70 Micron Porous PolypropyleneInternal Outlet Filter - 40 Micron Sintered Bronze
RUBBER PARTS: Buna-NBODY: Head-AluminumBOWL: Steel-internally coated to prevent rust. Withpolyethermide Sight Glass.
Color Change. When desiccant bead has changedcolor from dark blue to pink the entire desiccant mustbe replaced or regenerated by placing it in a dryingoven at 275° F until it turns dark blue again.
WARNING: These dryers are intended for use in compressed air systems only. Do not use where pressure or temperature may exceedmaximum rated operating conditions.Sight glass is made of a unique high chemical resistant resin. However, the sight glass will crack if exposed to solvents containing ethylacetate, methylene dichloride, methylethylketone, M.E.K.), phenol, 1, 1, 2-trichloroethane, xylene, benzyl alcohol, dichlorobenzene aswell as other harmful substances. If you have a particular concern, check with a General Electric office for further information on polyether-mide resin.These units are not to be used on life support systems or breathing air systems. Failure to follow the recommendations contained in thiswarning may result in personal injury and/or property damage.
ORDERING INFORMATION
PortSizeP.T.F.
BowlSize
Flow Ratein SCFM
OrderNumber
1/2" 1 qt. 10 56-081
Replacement BeadsOne Quart 56-082
56-081
56-082
Filters, Regulators, LubricatorsFilters, Regulators, Lubricators
4162A-99
Accessories and Components for New Modular 1/4, 3/8 and 1/2" Body Size FRLsDimensions in inches (mm)
Quickclamp Wall Mounting Bracket
QuikclampAmFlo NumberCompact Style 4761Modular 1/2 Body 4769Maximum Pressure: 250 psig (17 bar)Maximum Temperature:Compact 150°F (65°C)Modular 175°F (79°C)
Use with all compact and 1/2" modular products toprovide modular installation capability. Flanges on theproducts slide into V grooves in the Quikclamp. Twoface-sealing o-rings in the Quikclamp provide a posi-tive seal when the clamp is closed and the captivescrew is tightened.
A Quikclamp adds:
Compact0.26" (5.5 mm) to the overall length of a combinationunit. Screw with a 5/32" (4mm) hex or a T25 Torxwrench.
Modular0.54" (13.6 mm) to the overall length of a combinationunit. Screw with a 5/32" (4 mm) hex or a T25 Torxwrench.
Quikclamp and Wall Mounting BracketAmFlo Number:Compact Style 4762Modular 1/2 Body 4771See preceding paragraphs for descriptions anddimensions.
CompactUse 3/16" (6mm) screws to mount bracket to wall.
ModularUse 7/32" (6mm) screws to mount bracket to wall.
Compact -1/50" (38)Modular - 2.00"(51)
Panel Nut
Use to panel mount new modular 1/2" reg. and 1/2" combinations.
AmFlo Number:
4763 (Plastic) Compact4773 (Zinc) Modular
A B C
Compact 2/32(59) 0.55 (14) 2.91 (74)
Modular 3.25 (83) 0.95 (24) 4.0 (102)
Use with the preceding Quikclamp toprovide secure mounting to a wall,machine panel or other flat surface.
Compact Style 4759
Use 3/16" (5mm) screws to mountbracket to wall.
Modular 1/2" (1mm) body size 4770
Use 7/32" (6 mm) screws to mountbracket to wall.
Wall Mounting Bracket
Use to secure compact and 1/2" modular single units.
AmFlo Numbers:
Compact style 4760Modular 1/2" body style 4772
Use 3/16" (5mm) screws to mount bracket to wall.
FRL
Adap
ters
& A
cces
sorie
s
FRL Adapters & AccessoriesFRL Adapters & Accessories
52
401
444S
461
463
442
402
608
580
Barbed Hose Fittings
Barbed Hose FittingsBarbed Hose Fittings
53
Solid Brass Male Hose Barb Fittings
52-03952-03852-037
52-492
1/8"1/8"1/4"1/4"1/4"1/4"1/4"3/8"3/8"3/8"-243/8"1/2"3/4"
1/8"1/4"1/4"1/4"5/16"3/8"1/2"1/4"3/8"1/4"1/2"1/2"3/4"
NPTHoseID
CamelNo.
399404401401D405406408604606398608808814
AmfloNo.
6363
63626361
Select fitting to match hose inside diameter.*All packages contain 10 fittings. Amflo partnumbers with D suffix indicate display packs.
Male Ball Swivels
1/4"1/4"
1/4"3/8"
444S446S
Fitting may swivel and rotate without kinking or twisting of hose.
Male Swivel Fittings
1/4"1/4" 401SPermits rotation of fitting without kinking or twisting of hose.
Hi-Volume Male Swivel Fittings1/4"3/8" 406S
Solid Brass Female Fittings1/4"1/4"
1/4"3/8"
441461
Two Piece Swivel Female Fittings1/4"1/4"
1/4"5/16"
442452
NPTHose IDCamel
No.Amflo
No.
One Piece Female Swivel Fittings
1/4"3/8" 463
NPTHose IDCamel
No.Amflo
No.
Permits rotation of fitting without kinkingor twisting of hose.
Solid Brass Hose Splicers
52-04652-044
1/4"3/8"1/2"
402602802
Hose Clamps
5/16"5/16"
1/4" to 5/8"3/8" to 7/8"
AmfloNo.
CamelNo.
ClampWidth
Hose O.D.Range
580581
Gear type clamps permit quick hose repairwith simple tools. Stainless band, plated steelscrew. 10 pack.
Hose Splicer and Clamps Kits
3/8" Barb w/ clamp 411D
Use to repair hose in-line repairs or installnew hose end fittings.
AmfloNo.
CamelNo.Hose Size
CAUTION: Fittings must be secured to hose with either hose clamps or crimped-on ferrules with a hose crimper. Hose barbs are intended for use on compressed air onlywith a maximum working pressure of 300 PSI.
401L 446SL
402L
344X
366T
3404
3403 RET 366R
265
344U930
Bras
s Ho
se F
ittin
gs
Brass Hose FittingsBrass Hose Fittings
54
Lock-On Hose Barb Male
401L406L
1/4"3/8"
1/4"1/4"
Lock-On Hose Barb Male Ball Swivel
446SL3/8" 1/4"
Lock-On Hose Barb Splicers402L1/4"
NPT ThreadHose ID Amflo No.Lock-On Hose Barbs. Designed to use with Amflo’s speciallock-on hose. No ferrules or hose clamps are required. Not tobe used with conventional hose. All lock-on packages contain10 fittings unless otherwise marked.
Female Crosses
344X366X
1/4" NPT3/8" NPT
Excellent for running several air lines from a common supplyhose. Solid brass.
Female Tees
344T366T
1/4" NPT3/8" NPT
Run two lines from a common feed. Solid brass.
Three-Way Manifold
3404*3406*3408
1/4" NPTF3/8" NPTF1/2" NPTF
1/4" NPTF1/4" NPTF1/4" NPTF
Strong machined aluminum construction. Each manifoldaccepts three outlet hoses or couplers. * 3404 and 3406available in display packs.
Brass In-Line Swivels
344R366R
1/4" male / female NPT3/8" male / female NPT
Uniswivel
344U1/4" NPTF x 1/4" NPTM
Brass Drain Cocks
930931
1/4"1/16"
1/4"1/8"
NPTFlow Passage Amflo No.
Tank Safety Valve
265-RET1/4" 1/4" NPT(125 PSI)
Safety valve is furnished with relief pressure preset.
NPTFlow Passage Amflo No.
360° swivel action. 300 PSI.
Flat Brass Contruction.3/8" NPTF 1/4" NPTF 3403RET
Brass Hose Fittings
Brass Hose FittingsBrass Hose Fittings
55
Male Pipe Thread
1/4"1/4"1/4"1/4"3/8"1/2"
1/4"1/4"3/8"3/8"3/8"1/2"
1/2"19/32"5/8"23/32"21/32"7/8"
Hose I.D.Hose O.D. NPT Camel No.
418419620623624828
Male Pipe Couplings
1/4"1/4"1/4"3/8"1/2"
1/8"1/4"3/8"3/8"1/2"
324344346366388
Amflo No.
Male NPTMale NPT Camel No. Amflo No.
Solid brass NPT.
Bushings and Adaptors
1/8"1/4"1/4"1/4"3/8"3/8"
1/4"1/8"3/8"1/2"1/4"1/2"
324F342F346F348F364F368F
Solid brass.
Female NPTMale NPT Amflo No.
Pipe Coupling Female NPT
1/4" x 1/4" 344FSolid brass.
CAUTION: Check hose O.D. and I.D. accurately before ordering. All packagescontain 10 fittings.
419
344
346F
344F
Hose
Crim
pers
and
Fer
rule
s
Hose Crimpers and FerrulesHose Crimpers and Ferrules
56
Standard Hose Crimper
85555-001
Amflo No.Camel No.
WARNING: The products on this page are designed for use on compressed air lines only. Select fitting to match hose diameter. Fittings must be secured with the proper size crimped-onferrule. Do not exceed the pressure limitation of the hose and/or air operated devices beingused. Failure to follow these directions exactly may cause fittings to separate from hose andmay result in personal injury and/or property damage.
Provides production capabilities and “big tool" crimping advantages at a much lower cost.Heavy duty ductile iron castings and hardened steel dies provide long service life and posi-tive crimping. Includes five dies for crimping 1/4" braid to 3/8" double braided hose.
Replacement Dies for Crimping Tools (above)
856-1856-2856-3856-4856-5856-7856-8856-9856-10
Size
5/8" (.6250)37/64" (.5781)17/32" (.5312)31/64" (.4844)11/16" (.6875)7/16" (.4375)3/4" (.7500)13/16" (.8175)3/8" (.3750)
Brass Ferrules
7321-507322-507323-507325-507326-507327-507328-507329-507330-507331-507332-507333-507334-507335-503952-505029A-507242A-50
.478"
.500"
.527"
.562"
.593"
.625"
.656"
.687"
.718"
.750"
.781"
.812"
.825"
.850"
.875"
.900"
.937"
Use with hose barb fittings. Make sure ferruleclosely matches hose O.D. Use with hosecrimpers on this page. Camel ferrules are 25 per box. Amflo ferrules are 50 per box.
Lock-On Hose Assembly Tool
845
Simplifies the coupling of lock-on hoseand fittings. Hose is placed in the self-tightening clamp while light pressure onthe handle easily presses the speciallock-on fitting into the hose. Adaptors for 1/4" and 3/8" fittings are included.
Amflo No.Amflo No. Ferrule I.D.
855
856-3
845
7325-50
7329-50
Air Line Accessories
Air Line AccessoriesAir Line Accessories
57
WARNING: These air regulators are intended for use in compressed air systems only. Do not use where pressure or temperature canexceed rated operating conditions. See specifications. These air regulators are not designed for use with fluids other than air, for non-industrial applications, or for life support systems.
Disposable In-Line Filter
1027 Simple, one-piece aluminum housing with 40micron porous bronze element. 1/4" NPTF inlet and1/4" NPTM outlet.
Lubricants
1220-1 Light Pneumatic Tool Oil. 92 SUS at 75 F 1 pt..1220-4 Light Pneumatic Tool Oil. 92 SUS at 75 F 4 oz.1220-8 Light Pneumatic Tool Oil. 1 gallon U.S.1420 Compressor Oil. 1 quart
Amflo No.
Tamperproof In-Line Regulators
Tamperproof Fixed Pressure Setting. Preset at the factory. Can be installed with safety in mind.
Balanced Popet Design. Will not chatter or drift. Factory outlet setting will not change even when inlet pressure varies100 PSI. Regulator inlet rating 400 PSI. Unit only delivers line pressure. Delivery pressure is a function of flow.
High Flow Capabitlty. Can be restricted for low flow requirements.
Streamlined Low Profile Shape. For neat installation and space saving requirements (1/4" NPTF).
Easy to Install. No brackets or special tools required. Regulator will function in any position.
High Strength Aluminum Alloy. Anodized for corrosion protection, also color coded. Other settings available upon request.
1/4" 2109 (40lbs) Blue Band 2112 (90 lbs) Red Band2111 (70 lbs) Gold Band 2113 (100 lbs) Silver Band
2114 (110 lbs) Brass Band
Amflo No. Amflo No.
1420
1220-1
1027
Air L
ine
Acce
ssor
ies
Air Line AccessoriesAir Line Accessories
58
Large Capacity Portable Air Tank
54-510
AmfloNo.
CamelNo.
Heavy-duty construction, 12-1/4" diameter by 20-3/8" long. Has 6 galloncapacity at 125 PSI. Includes: pressure gauge, filler valve and 4 feet ofhose with ball foot chuck. Cannot be sold in New Jersey in compliancewith state laws.
1012-16054-515Replacement Dial Gauge. For 54-510 air tank.
54-516Replacement Hose and Fittings.
54-517Replacement Manifold and Fittings.
880
Bell rings when auto tire passes over the hose. Easy to install and wirefor 110 volt, 3 wire ground cord. UL Listed.
Control Switch
Driveway Signal Bell
880CSLate Bell Switch.
Hose Anchor-End Plug
880N
Signal Bell Hose
494-100494-500
100'500'
Durable rubber hose.
Brass Bicycle Pump Fitting
705706
3/16"1/4"
Screw-on swivel chuck for most hand operated tire pumps.
AmfloNo.
BarbSize
54-510
880
880CS
880N
706
Pneumatic Valves
Pneumatic ValvesPneumatic Valves
59
Throttle Valve
235 (boxed)
Amflo No.
Amflo No. NPTM
O.S.H.A. STANDARD 1910.147This procedure establishes the minimum requirements for the lockoutor tagout of energy isolating devices. It shall be used to ensure thatthe machines or equipment are isolated from all potentially hazardousenergy, and locked out or tagged out before employees perform anyservicing or maintenance activities. Stored energy such as hydraulicsystems and air pressure must be dissipated or restrained by methodssuch as blocking, bleeding down, etc.
WARNING: Valves on this page are intended for compressed airlines or water lines only. All have a maximum rated pressure of 300PSI unless otherwise noted.
Controls air flow from near shut-off to full flow. Knurled knobis graduated. Spring loaded ball and detent hold setting. Solidbrass construction. 1/4" NPTF outlet.
Lever Action Two Way Valve
240
Chrome plated die cast body. Buna-N seals for air and water.1/4" NPTF inlet and outlet.
Three Way Slide Valve
250260
1/8"1/4"
NPTF
1/8"1/4"
Heavy duty fast acting in-line valve for air and fluid shut off.Plated construction with knurled sleeve allows easy movementforward and back.
Button Valve
24630 CFM at 100 PSI28 CFM at 90 PSI25 CFM at 80 PSI23 CFM at 70 PSI
0 CFM at 0 PSI
1/4"
Solid brass construction. Buna-N seal. Two-way is normally closed.Rated at 175 PSI.
Bleeder Valve
711 (boxed)710
1/8" NPTM.
Simple push button for bleeding compressed air lines or liquidsystems. Plated brass. 10 pack.
Amflo No. Standard Ball Valve (size)Standard Two Piece Ball Valves
130213031306
1/4"3/8"3/4"
For all commercial and general industrial applications.Pressure rating 600 PSI, steam rating 150 WP, temperaturerange -20°F to 370°F. Female NPT.
240
711
1304
235
260
246
Mis
t Coo
lant
Uni
t and
Acc
esso
ries
Mist Coolant Unit and AccessoriesMist Coolant Unit and Accessories
60
40
40R
43W
273
270A
Radiator Faucet
40
Amflo No.
Aluminum spout. 1/4" NPTF inlet thread.
Radiator Faucet with Rubber Nozzle
40RShock proof molded rubber nozzle protects painted finish. 1/4" NPTF. 60 PSI.
41R
Radiator Faucet with Rubber Nozzle. Shock proof molded rubber nozzle. Garden hose inlet thread.
Kink-it Radiator FillerLightweight easy to operate. Garden hose inlet thread. Press side of rubber tube toopen valve.
43W
Mist Coolant Unit
270A
For machine shop use in milling, drilling, grinding and for crankshaft turning equip-ment. Sets up in seconds, uses powerful compound magnet to hold it firm.
270A-T 12" Spray Line Assembly. 1 each.Repair Parts:
Faucets - Features chrome plated bodies with brass internal parts and self adjusting u-cup packing. Handles are riveted and spouts are reinforced for long service life. Lever controlledoperating valve. Oil resistant.
Mist Coolant Concentrate
273-4
Specially formulated for all metals, including aluminum. Cools and lubricates, inhibitsrust. Contains no nitrites. 1 gallon.
Recoil Hose
Recoil HoseRecoil Hose
61
14-25
6-12
4-25
Recoil Hose - Standard, Nylon 11, Double Swivels, 200 PSI
1/4" x 12', 1/4" Swivel Fittings Yellow1/4" x 25', 1/4" Swivel Fittings YellowDisplay Pack 4-25 Yellow3/8" x 12', 3/8" Swivel Fittings Yellow3/8" x 25', 3/8" Swivel Fittings Yellow3/8" x 12', 1/4" Swivel Fittings Yellow3/8" x 25', 1/4" Swivel Fittings Yellow1/2" x 25', 1/2" Swivel Fittings Yellow1/2" x 50', 1/2" Swivel Fittings Yellow
4-124-254-25D6-126-256-12A6-25A8-258-50
Description ColorAmflo
No.
55-461
CamelNo.
Recoil Hose-Bulk (no fittings), 200 PSI
3/8" x 100' Bulk Recoil Hose Red1/2" x 100' Bulk Recoil Hose Red
6-1008-100
Recoil Hose-Heavy Duty, Double Swivel, 280 PSI
1/4" x 1', Heavy Duty, 1/4" male Double Swivels Blue1/4" x 25', Heavy Duty, 1/4" male Double Swivels Blue1/4" x 50', Heavy Duty, 1/4" male Double Swivels Blue3/8" x 12', Heavy Duty, 3/8" male Double Swivels Blue3/8" x 25', Heavy Duty, 3/8" male Double Swivels Blue
14-1214-2514-5016-1216-25
All Standard Recoil Hose 200 psi All Heavy Duty Recoil Hose 280 psi All Polyurethane Recoil Hose 130 psi
KEEP OUT OF REACH OF CHILDRENWARNING: This product is designed for use on regulated compressed air lines or on air compressors where air pressure does not exceed200 PSI. Do not exceed the pressure limitation of the hose and/or air operated devices being used. Failure to follow these specificationsand directions exactly may result in personal injury and/or property damage.
Reco
il Ho
se
Recoil HoseRecoil Hose
62
Replacement Fitting Kits
1/4" fitting, nut insert, ferrule, spring guard for 1/4" I.D. hose3/8" fitting, nut insert, ferrule, spring guard for 3/8" I.D. hose1/2" fitting, nut insert, ferrule, spring guard for 1/2" I.D. hose
4-06-08-0
(fitting, nut insert, ferrule, spring guard) - NYLON
Polyurethane Hose Assemblies with Pigtails/Male Solid
1/4" x 10' Polyurethane with pigtails, 1/4" male solids Yellow1/4" x 20' Polyurethane with pigtails, 1/4" male solids Yellow1/4" x 30' Polyurethane with pigtails, 1/4" male solids Yellow3/8" x 10' Polyurethane with pigtails, 3/8" male solids Yellow3/8" x 30' Polyurethane with pigtails, 3/8" male solids Yellow3/8" x 20' Polyurethane with pigtails, 1/4" male solids Yellow1/2" x 10' Polyurethane with pigtails, 1/2" male solids Yellow1/2" x 20' Polyurethane with pigtails, 1/2" male solids Yellow
24-1024-2024-3026-1026-3026-20A28-1028-20
Description ColorAmflo No.
24-10
4-0
6-0
8-0
Recoil Hose-Fitted, Double Swivel- Nylon 6 “Economy"1/4" x 25' Economy hose, 1/4" Double Swivel Yellow1/4" x 50' Economy hose, 1/4" Double Swivel Yellow
4-25E4-50E
Hose Assemblies
Hose AssembliesHose Assemblies
63
PVC - Light Weight
ColorAmflo No.
522-50522-100524-25524-25A524-50524-50A524-100A
YellowYellowBlueBlueBlueBlueBlue
PSI
250250300300300300300
Description
1/4" x 50', 1/4" Fittings1/4" x 100', 1/4" Fittings3/8" x 25', 3/8" Fittings3/8" x 25', 1/4" Fittings3/8" x 50', 3/8" Fittings3/8" x 50', 1/4" Fittings3/8" x 100', 1/4" Fittings
PVC
554-25A with Board/Sleeves554-50A with Board/Sleeves554-100A with Board/Sleeves
BlueBlueBlue
300300300300300300
3/8" x 25", 1/4" Fittings3/8" x 50', 1/4" Fittings3/8" x 100', 1/4" Fittings
576-25A576-50A578-50A
3/8" x 25', 1/4" Fittings3/8" x 50', 1/4" Fittings3/8" x 100', 1/4" Fittings
Day Glo OrangeDay Glo OrangeDay Glo Green
Rubber
512-25 Heavy Duty512-50 Heavy Duty512-100 Heavy Duty514-25A Heavy Duty514-50 Heavy Duty514-50A Heavy Duty515-50 Heavy Duty515-50A Heavy Duty552-50A with Board/Sleeves552-100A with Board/Sleeves555-50A with Board/Sleeves
RedRedRedRedRedRedRedRedRedRedGray
300 300300300300300300300300300300
1/4" x 25', 1/4" Fittings1/4" x 50', 1/4" Fittings1/4" x 100', 1/4" Fittings3/8" x 25', 1/4" Fittings3/8" x 50', 3/8" Fittings3/8" x 50', 1/4" Fittings1/2" x 50', 1/2" Fittings1/2" x 50', 3/8" Fittings3/8" x 25', 1/4" Fittings3/8" x 50', 1/4" Fittings3/8" x 50', 1/4" Fittings
Rubber – Bulk Reels
506L-500 Lock On508L-500 Lock On512-500 Heavy Duty514-500 Heavy Duty515-500 Heavy Duty
GrayGrayRedRedRed
300300300300300
1/4" x 500'3/8" x 500'1/4" x 500'3/8" x 500'1/2" x 500'
KEEP OUT OF REACH OF CHILDRENWARNING: This product is designed for use on regulated compressed air lines or on air compressors where air pressure does not exceed 300PSI. Do not exceed the pressure limitation of the hose and/or ai roperated devices being used. Failure to follow these specifications anddirections exactly may result in personal injury and/or property damage.
512-25
522-50
576-50A
552-50A
555-50A
554-50A
Air /
Mul
ti-Pu
rpos
e Ho
se
Hose Assemblies, Air / Multi-Purpose HoseHose Assemblies, Air / Multi-Purpose Hose
64
Lead-In and Whip Hose
ColorAmflo No.
25L-24B25L-24BD25L-60BD28L-24BD28L-60B37L-24B37L-30B37L-30BD37L-72B37L-72BD
GrayGrayGrayGrayGrayGrayGrayGrayGrayGray
PSI
300300300300300300300300300300
Description
1/4" x 24" Ball Swivel Lead-In1/4" x 24" Display Pack1/4" x 60" Display Pack1/4" x 24" Display Pack1/4" x 60" Lead-In with Valve3/8" x 24" Lead-In, 1/4" (M) x 1/4" (F)3/8" x 30" Lead-In, 1/4" Ball Swivel3/8" x 30" Display Pack3/8" x 72" Lead-In, 1/4" Ball Swivel3/8" x 72" Display Pack
Heavy Duty Hose
Lock-On HoseAir Hose
Amflo No.
506L-500508L-500
Size and Length
1/4" x 500'3/8" x 500'
Special hose designed for lock-on fittingswhich are much quicker to use and do notneed ferrules. Cut hose to length and pushin fitting. The special weave of the hosegrips fitting and holds it securely beyondburst strength of the hose itself. Doesn’trequire crimping.
Warning: Use only fittings madespecifically for Lock-On hose.Conventional barb type will not holdsecurely. Working pressure 250 PSI.
512-500*514-500*515-500*
1/4"3/8"1/2"
.531
.688
.844
300300300
Smooth red cover is tough and resistantto oil and grease. Hose has same quali-ties as standard duty hose but has higherPSI ratings.
Signal Bell Hose. Durable rubber hose.200 PSI. Black.
Other Hose
494-100494-500 Heavy-Duty, Bulk Reel
28L-24BD
37L-30B
AmfloNo.
AmfloNo. Size
Air Hose Reels
Air Hose ReelsAir Hose Reels
65
Features:
• Spring tension brake• All steel construction• Solid brass 1/4" fittings• Comfortable swivel handle• Can be mounted in any direction• Reel capacity is 150' of 5/8" O.D. hose
Non-Retractable Hose Reel
Amflo No.
500HR-RET
501HR-RET502HR-RET
Description
Reel with 3/8" X 50' PVC Hose – IncludesBonus Blow Gun KitReel and Hose OnlyReel Only
Features:
• All steel construction for industrial applications.• Spring powered auto rewind• Ideal for mounting on the wall, floor or ceiling• Guide arm adjustable for different angles• Valve assembly handles up to 250 psi and 25 cfm• Locking ratchet brake
Retractable Hose Reel
Amflo No.
510HR-RET
505HR-RET
515HR-RET
520HR-RET
522HR-RET
525HR-RET
550HR-RET
Description
Reel with 3/8" X 25'Rubber HoseReel with 3/8" X 50'Rubber HoseReel with 1/2" X 50'Rubber HoseStainless SteelReel with 3/8" X 25'Rubber HoseEnclosed Reel with 3/8" X 30' Rubber HoseEnclosed Reel with 3/8" X 50' Rubber HosePlastic Enclosed Garden HoseRetractable Reel 75'
Bonus!
Blow Gun KitIncluded With500HR-RET
Coup
lers
& P
lugs
Couplers & PlugsCouplers & Plugs
66
Quick disconnect couplers are the fastest, easiest, and most reliable means of joining pneumatic and fluid transfer lines.All quick disconnect couplers work on the same principle:
• Hardened balls or pins engage a groove in the coupler plug to hold it securely against a soft seal while permitting the assembly toswivel, thereby preventing kinking or twisting of hose.
• A sliding sleeve releases the locking balls when retracted, permitting the plug to be inserted or removed. The sleeve automatically returns to the locked position when released.
• An automatic shutoff valve in the coupler seals instantly upon uncoupling, eliminating the need for a separate shutoff.
Introduction
Long Service Life. Zinc plating provides a non-corrosivefinish. Heat treating hardens critical wear points. MoldedBuna-n seals create a leak proof connection.Efficient Performance. Tubular valve design provides highflow rates. Steel locking balls ensure connection holds tightunder the most rugged applications. Spring loaded slidingouter sleeve allows quick connect/disconnect.
Features / Benefits
2345678 9
10
10 20 30 40 50 60 80 100 150 200
11
20
1/4" S
ERIES
3/8" S
ERIES
1/2" S
ERIES
3/4" S
ERIES
Pressure Drop - PSI
Flowrate - CFM
100 PSI Inlet Pressure80 PSI Inlet Pressure
Rated Pressure (PSI)Temperature RangeLocking DeviceForce Required to connect (lbs)With 80 PSI initial pressureWith 100 PSI initial pressureVacuum Data (inches Hg)Disconnected (coupler only)Connected
300
4 balls
1720
27.4
300
6 balls
1921
27.4
300
6 balls
4753
27.4
1/4" 3/8" 1/2"
Body SizeSPECIFICATIONS
-40°to 240°F
Not recommended
Hansen . . . . . . . . . . . . . . .2 NarrowLincoln . . . . . . . . . . . . . . .1 Narrow, 1 WideDiamond U . . . . . . . . . . . .3 NarrowAro . . . . . . . . . . . . . . . . . .1 WideAuto Stnd 1/4, 3/8 . . . . . .1 NarrowAuto & Ind. Stnd 1/2 . . . . .4 Narrow
COUPLER STYLE GROOVE CONFIGURATION
Many Sizes & Styles. Available in 1/4, 3/8, 1/2, 3/4inch bodies with male and female pipe threads, hosebarb or lock-on ends for every application.Interchangeability. Fully interchangeable with couplersand plugs made by other manufacturers. (See inter-change chart).
HOW TO IDENTIFY COUPLER STYLEPERFORMANCE
Coupler Plug Connected
Locking Balls Groove Shutoff Valve Seal Sliding Sleeve
Couplers & Plugs
Couplers & PlugsCouplers & Plugs
67
C60
C61
C27
C28
C38
C37
Combo Coupler®
1/4" Series 1/4" NPT female1/4" Series 1/4" NPT male
C60C61
Amflo No.Camel No.
The solution for coupler confusion. Now one coupler fits 1/4" Aro Style, 1/4" AutomotiveStandard and 1/4" Industrial Interchange plugs. Convenient push-to-connect brass design.Temperature range -40°F to +240°F. Made is the USA.
WARNING: Use only on compressed air lines at a maximum pressure of 250 PSI for ComboCoupler®. For safety, do not exceed the pressure limitation of the hose and or air operateddevice you are using. Not for use with food stuffs or ingestible products.
1/4" Series Lincoln Long Nose Type “A"
MaleFemale
1/4"1/4"
SteelSteel 61-548
C27C28
61-55061-551
CP27CP28
ThreadType
NPTSize
TypeMetal
CamelNo.
AmfloNo.
CamelNo.
AmfloNo.
Plated steel couplers have hardened steel balls and stainless steel springs. Couplerplugs are heat treated to reduce wear on critical mating surfaces. The Lincoln Series ofplugs are easily identified by the long plug end. The couplers are identified with onenarrow and one wide groove on the sleeve. Couplers interchange with Lincoln as wellas units produced by other manufacturers. Maximum working pressure 300 PSI.
1/4" Series (Aro Series) Type “B"
MaleMaleMaleFemaleFemaleFemaleHose BarbHose BarbHose BarbLock-On Barb
1/4"1/4"3/8"1/4"1/4"3/8"1/4"3/8"3/8"3/8"
SteelBrassSteelSteelBrassSteelSteelSteelBrassSteel
61-526
C37
C37-03C38C38BC38-23C38-42C38-44
61-528
61-529
CP37CP37BCP37-03CP38CP38BCP38-23CP37-42
CP37-44BCP37-44L
Plated steel couplers have hardened steel balls and stainless steel springs. Couplerplugs are heat treated to reduce wear on critical mating surfaces. The Aro Series ofplugs are easily identified by the distinct appearance of the plug. The couplers areidentified with one wide groove on the sleeve. Couplers interchange with Aro 210series as well as units produced by other manufacturers. Maximum working pressure
Retail Pack (blister card) 61-555 One female 1/4" NPT Coupler, One Male 1/4" NPT
COUPLERS PLUGS
WARNING: Use only on compressedair lines at a maximum pressure of300 PSI. For safety, do not exceed thepressure limitation of the hose and/orair operated device you are using. Notfor use with food or ingestible prod-ucts. If this product has a hose barb,make sure hose barb size matches theinside diameter of the hose you areusing. All hose barb fittings must besecured to the hose with a hose clampor crimped-on ferrule. Failure to fol-low these directions exactly may resultin injury and/or property damage.
See price sheet for packaging options.
Coup
lers
& P
lugs
Couplers & PlugsCouplers & Plugs
68
C45
C46
CP37
C35
C36
CP36
C1
CP1 C2
CP2 C2-44
1/4" Series (Aro Series) Type “B" Coupler and Plug Set
61-530
Camel No.
Retail pack of one female 1/4" NPT coupler and one male 1/4" NPT plug on an attractiveblister card.
1/4" Series (Aro Push-to-Connect) Type “B"Push-to-connect couplers are automatically connected by pushing the plug into thecoupler. Especially useful for hooking up implements. Allows one hand operation.Maximum working pressure 300 PSI.
ThreadType
NPTSize
TypeMetal
CamelNo.
AmfloNo.
CamelNo.
AmfloNo.
COUPLERS PLUGS
MaleFemale
1/4"1/4"
SteelSteel
C45C46
CP37CP38
3/8" Aro Series (Maximum working pressure 300 PSI)
MaleFemale
3/8"3/8"
SteelSteel
C35C36
CP35CP36
1/4" Automotive Standard Series Type “C"
MaleMaleMaleFemaleFemaleFemaleHose BarbHose BarbLock-On BarbLock-On Barb
1/4"1/4"3/8"1/4"1/4"3/8"1/4"3/8"1/4"3/8"
SteelBrassSteelSteelBrassSteelSteelSteelSteelSteel
61-523
C1C1BC1-03C2C2BC2-23C2-42C2-44
C2-44L
61-538
61-539
CP1CP1BCP1-03CP2CP2BCP2-23CP1-42CP1-44CP1-42LCP1-44L
Plated steel couplers have hardened steel balls and stainless steel springs. Couplerplugs are heat treated to reduce wear on critical mating surfaces. The AutomotiveSeries couplers interchange with Tru-Flate 10 and 100 type series as well as unitsproduced by other manufacturers. Maximum working pressure 300 PSI.
See price sheet for packaging options.
Couplers & Plugs
Couplers & PlugsCouplers & Plugs
69
CP121/4" Recapper Series
FemaleFemaleFemale
1/4"1/4"1/4"
SteelBrassBrass
C2RC2RB
CP12
ThreadType
NPTSize
TypeMetal
CamelNo.
AmfloNo.
CamelNo.
AmfloNo.
.302-32 Std.
.482-26 2-3/4"
.302-32 Std.
Thread/Length
COUPLERS PLUGS
3/8" Automotive Standard Series Type “G"Plated steel couplers have hardened steel balls and stainless steel springs. Couplerplugs are heat treated to reduce wear on critical mating surfaces. Maximum workingpressure 300 PSI.
MaleMaleMaleFemaleFemaleFemaleHose BarbHose BarbLock-On BarbLock-On Barb
1/4"3/8"1/2"1/4"3/8"1/2"3/8"1/2"1/4"3/8"
SteelSteelSteelSteelSteelSteelSteelSteelSteelSteel
C7C5C5-04C8C6C6-24C6-44C6-45
CP7CP5
CP8CP6CP6-24CP5-44
CP5-42LCP5-44L
ThreadType
NPTSize
TypeMetal
CamelNo.
AmfloNo.
CamelNo.
AmfloNo.
COUPLERS PLUGS
C7
CP7
C8
CP8
See price sheet for packaging options.
Coup
lers
& P
lugs
Couplers & PlugsCouplers & Plugs
70
1/2" Automotive Standard Series Type “F"Plated steel couplers have hardened steel balls and stainless steel springs. Coupler plugs are heattreated to reduce wear on critical mating surfaces. Maximum working pressure 300 PSI.MaleMaleFemaleFemaleHose Barb
3/8"1/2"3/8"1/2"1/2"
SteelSteelSteelSteelSteel
61-563
C9-03C9C10-23C10C10-45
CP9-03CP9CP10-23CP10CP9-45
MaleMaleMaleMaleFemaleFemaleFemaleFemaleHose BarbHose BarbHose BarbHose BarbLock-On BarbLock-On BarbFemale
1/4"1/4"3/8"3/8"1/4"1/4"3/8"3/8"1/4"1/4"3/8"3/8"1/4"3/8"1/4"
SteelBrassSteelBrassSteelBrassSteelBrassSteelBrassSteelBrassSteelSteelSteel
61-574
61-573
C21C21BC21-03C21-03BC20C20BC20-23C20-23BC20-42C20-42BC20-44C20-44BC20-42LC20-44L
61-578
61-579
61-023
CP21CP21BCP21-03CP21-03BCP20CP20BCP20-23CP20-23BCP21-42
CP21-44CP21-44BCP21-42LCP21-44LCP22
1/4" Industrial Interchange Series Type “D"Plated steel couplers have hardened steel balls and stainless steel springs. Couplerplugs are heat treated to reduce wear on critical mating surfaces. The IndustrialInterchange Series couplers interchange with Aro, Foster, Milton as well as units pro-duced by other manufacturers. Maximum working pressure 300 PSI.
(.302-32)
C9-03
CP10
C21
C20
C20-44 C20-42L
CP21-44
C9
ThreadType
NPTSize
TypeMetal
CamelNo.
AmfloNo.
CamelNo.
AmfloNo.
COUPLERS PLUGS
See price sheet for packaging options.
Couplers & Plugs
Couplers & PlugsCouplers & Plugs
71
ThreadType
NPTSize
TypeMetal
CamelNo.
AmfloNo.
CamelNo.
AmfloNo.
Female 1/4" Steel C40
COUPLERS PLUGS
CamelNo.
61-572
1/4" Industrial Interchange Series Type “D" Coupler and Plug SetRetail pack of one female 1/4" NPT coupler and one male 1/4" NPT plug on blister card.
1/4" Industrial Interchange (Push-to-Connect) Type “D"
MaleMaleMaleFemaleFemaleFemaleHose BarbHose BarbHose BarbLock-On Barb
1/4"3/8"1/2"1/4"3/8"1/2"1/4"3/8"1/2"3/8"
SteelSteelSteelSteelSteelSteelSteelSteelSteelSteel
C25-02C25C25-04C26-22C26C26-24
C26-44C26-45C26-44L
CP25-02CP25CP25-04CP26-22CP26CP26-24
CP25-44CP25-45CP25-44L
3/8" Industrial Series Type “E"WARNING: Couplers and Plugs listed in this section are intended for use on com-pressed air lines only. All have a maximum rated working pressure of 300 PSI.
MaleMaleFemaleFemaleHose Barb
3/8"1/2"3/8"1/2"1/2"
SteelSteelSteelSteelSteel
C9-03C9C10-23C10C10-45
CP17-03CP17
CP18CP17-45
1/2" Industrial InterchangeWARNING: Couplers and Plugs listed in this section are intended for use on com-pressed air lines only. All have a maximum rated working pressure of 300 PSI.
WARNING: Use only on compressed air lines at a maximum pressure of 300 PSI. For safety, do not exceed the pressure limitation of the hoseand/or air operated device you are using. Not for use with food stuffs or ingestible products. If this product has a hose barb, make sure hosebarb size matches the inside diameter of the hose you are using. All hose barb fittings must be secured to the hose with a hose clamp orcrimped-on ferrule. Failure to follow these directions exactly may cause product to fail and may result in injury and/or property damage.
C40
CP26
C9-03
C9
C10RCP17-03CP17
C25
See price sheet for packaging options.
Coup
lers
& P
lugs
Couplers & PlugsCouplers & Plugs
72
ThreadType
NPTSize
TypeMetal
AmfloNo.
Amflo(Steel)
Amflo(Brass)
MaleMaleMaleFemaleFemaleFemaleFemaleFemale
1/8"1/4"3/8"1/4"1/8"1/4"3/8"1/2"
BrassBrassBrassBrassBrassBrassBrassBrass
CST1B
CST17B
CST4BCST6BCST8B
CPST3BCPST5BCPST17BCPST2B
CPST6B
CPST3CPST5
CPST6
COUPLERS PLUGS
Straight-Thru CouplersThese couplers and plugs have no valves. Smooth straight-thru bore allows maximumflow. Made from solid brass bar stock. Couplers have stainless steel springs and balls.Excellent for carpet cleaners, vacuum service and pressure washers. For pressure rat-ings use table below. Interchanges with Parker ST type.
ThreadType
NPTSize
TypeMetal
AmfloNo.
AmfloNo.
MaleFemale
1/4"1/4"
SteelSteel
C31C30
CP33CP34
COUPLERS PLUGS
1/4" Diamond-U InterchangeThese couplers and plugs interchange only with Diamond-U which is primarily foundon the West Coast. Maximum operating pressure 300 PSI.
Body
Brass
Steel
1/8"
2500
2600
1/4"
5200
5500
3/8"
2700
3500
1/2"
2200
2700
Straight-Thru Pressure Specifications (in PSI).
These sturdy key rings are the finest available. Similar to 1/8" pneumatic coupler andplug sets with heavy nickel plating. Will provide years of reliable service and security.Available on counter cards, in 10 packs or on blister cards. Made in USA.PackageSize
CamelNo.
AmfloNo.
Blister Card10 Pack
900D900
Coupler and Plug Key Rings
Repair Kit
859W (boxed)1/4" Coupler repair kit with seals for in-field repairs. 1 pack.
CST5B
CPST5
CPST5B
CST6B
CPST6
CPST6B
900
See price sheet for packaging options.
Coupler Interchange
Coupler InterchangeCoupler Interchange
73
C27C28
Amflo
61-48661-548
Camel
61-48661-548
Bridgeport
790NA
Milton
35273528
Schrader
13-42413-434
TruFlate
90-64590-644
NAPA
NA815
Lincoln
C37C38C45C46
61-52761-52661-58161-518
61-52761-52661-58161-518
NANANANA
35253526NANA
13-32413-334
NANA
90-61490-61290-67990-613
NA862NANA
C1C2C2R
61-52461-52361-487
61-52461-52361-487
786785787
350335043505
13-12513-13413-136
90-61090-60090-609
NANANA
C5C6C7C8
61-55461-55361-47861-476
61-55461-55361-47861-476
18061805NA
1803
35153516NA
3521
13-60413-61213-60213-610
90-65690-65490-68490-686
NANANANA
C9C10C10-23
61-56461-56361-472
61-56461-56361-472
181618151813
351135123516
13-70413-71213-710
90-66490-66290-690
651008652008652006
C20C21C20-23C21-03C40C41
61-57361-574NANA61-01361-011
61-57361-57461-10361-10161-01361-011
715716718719755756
5142-125141-125263-125140-125138-125139-12
13-23413-22413-23613-22613-75513-756
90-67090-672
NANA
90-61590-617
612004611004612006631006
NANA
C25C26C25-02C25-04
61-48361-482NANA
61-48361-48261-11061-111
18361835NANA
NA3541NANA
13-52613-536
NANA
90-68290-68090-62590-627
641006642006641004641008
C9-03C9C9-06C10
NANANANA
61-47361-56461-46061-563
18141816NA
1815
NA3511NA
3512
13-70213-704
NA13-712
90-66890-664
NA90-662
LN3103LN3003
210-3103NA
210-3103NA
TF3103TF3003
NA
TF4304TF4204TF4104TF4004
530552055005
3003310332033303
FM3003FM3103
430442044104NA
51055305NA
5205
651106651008651012652008
Foster
1/4" Series Lincoln Long Nose Type “A"
1/4" Series Automotive Type “C"
1/2" Series Automotive Type “F"
3/8" Series Automotive Type “G"
1/4" Series Aro Type “B"
1/4" Series Industrial Type “D"
1/2" Series Industrial Type “H"
3/8" Series Industrial Type “E"
Plug
Inte
rcha
nge
Plug InterchangePlug Interchange
74
CP27CP28
61-55061-551
61-55061-551
791792
35313532
12-42412-434
90-64890-650
1165911661
LN10LN11
CP37CP38
61-52861-529
61-52861-529
777778
35293530
12-32412-334
90-61890-620
1332913331
210-10210-11
CP1CP2
61-53861-539
61-53861-539
783784
35063504
12-12413-134
90-62690-600
NANA
TF10TF11
CP5CP6CP7CP8
61-55861-55961-48061-481
61-55861-55961-48061-476
1807180818091810
3517351835193520
12-60412-61212-60212-610
90-65890-66090-68590-687
NANANANA
TF42TF43TF40TF41
CP9CP10CP10-23
61-56861-56961-475
61-56861-56961-475
181718181820
35133514NA
12-70412-71212-710
90-66690-66890-691
NANANA
54-555-553-5
CP20CP21CP20-23CP21-03
61-57961-578
NA61-535
61-57961-57861-10361-535
728727732733
5139-115138-115263-11
NA
12-23412-224
NA12-226
90-67690-674
NA90-677
630204630104630106631006
11-310-315-314-3
CP25CP26CP25-02C25-04
61-48461-485
NANA
61-48461-48561-11761-118
183718381839NA
35423543NANA
12-52612-536
NANA
90-68390-681
NANA
640106640206640104640108
42-443-440-4NA
CP17-03CP17CP17-06
61-13361-134
NA
61-13361-13461-135
18191817NA
35373513NA
12-70212-704
NA
90-68990-666
NA
NA630204
NA
52-554-5NA
1/2" Series Industrial Type “H"
3/8" Series Industrial Type “E"
1/4" Series Industrial Type “D"
1/2" Series Automotive Type “F"
3/8" Series Automotive Type “G"
1/4" Series Automotive Type “C"
1/4" Series Aro Type “B"
1/4" Series Lincoln Long Nose Type “A"
Amflo Camel Bridgeport Milton Schrader TruFlate NAPA Lincoln Foster
Numerical Index
Numerical IndexNumerical Index
84
Cold Patch Repair11-004 3
On-the Wheel RepairKits15-161 415-162 415-163 415-164 415-165 415-168 415-169 415-170 415-179 415-184 415-206 415-207 415-280 415-281 4
Cements12-077 512-085 512-086 512-087 512-089 512-287 5
Chemicals & Sealants12-072 612-078 612-079 612-090 612-092 612-093 612-095 612-096 612-097 6
Tire & Tube Patches14-132 714-134 714-137 714-139 714-140 714-130 714-152 714-153 7
14-154 714-157 714-158 714-159 714-400 714-401 714-402 714-403 714-404 714-408 714-409 7
Heavy-Duty TireRepair13-102 813-103 813-105 813-106 813-107 813-108 813-123 813-126 813-127 813-128 813-230 813-251 813-252 813-253 813-254 813-255 813-310 813-312 813-320 813-322 813-340 813-451 813-452 815-290 815-291 815-295 815-296 815-297 815-298 8
Service Center &Repair Kits15-189 10
15-262 10
Tire Service Center &Repair12-087 1115-178 1115-282 11
Tire Repair Hand Tools15-172 1215-174 1215-224 1215-225 1215-227 1215-230 1215-231 1215-232 1215-249 1217-235 1217-236 1217-237 1217-244 1217-245 1217-246 1217-248 1217-253 1217-274 1217-276 1217-295 12
Tire Repair PowerTools & Accessories18-263 1318-264 1318-266 13
Buffer Stones,Brushes & Chucks18-141 1418-146 1418-259 1418-260 14Snap-In Valves30-136 1730-186 1730-316 1730-318 17
30-412 1730-413 1730-414 1730-415 1730-418 1730-423 1730-425 1730-600 1730-801 17
Clamp-In Valves32-309 1832-543 1832-547 1832-946 1832-985 18
Clamp-In Valves30-430 1930-445 1930-463 1930-472 19
Truck, Bus Valves32-200 2032-201 2032-202 2032-203 2032-204 2032-205 2032-207 2032-208 2032-608 2033-306 2138-900 2238-906 22
Special Valves700 22701-2 22701-42 22
Special, Misc., Ag.Valves & Extensions31-013 2331-015 2331-336 2334-282 24
34-955 2434-963 2438-313 2538-314 2538-315 2538-324 2538-325 2538-326 2538-400 2638-430 2638-432 2638-436 2638-472 2638-474 2638-475 2638-476 2638-477 2638-478 26
Valve Cores & Caps37-828 2738-810 2738-830 2738-505 2838-600 2838-712 2838-714 2838-750 2838-772 2838-790 27941-100 28943-100 28
Pressure Gauges40-395 2940-400 2940-406 2940-408 2940-412 2940-435 2940-399 29
Tire Service Tools41-067 3241-068 3241-444 3241-460 32
Part No. Pg No. Part No. Pg No. Part No. Pg No. Part No. Pg No. Part No. Pg No.
Num
eric
al In
dex
Numerical IndexNumerical Index
85
41-466 3241-469 3241-506 32
Inflator Gauges,Hoses & Equalizer1125 34
Pressure Gauges902D 30903D 30906AD 29908D 30980-160D 30
Tire Service Tools921 32922 32922D 32
Inflator Gauges &Hoses100 33100D 33101 33101D 33108D 33110 34112 34113 34135 33150 33150D 33151 33153 34159 34180D 33
Air Chucks104 36104CA 36104CAD 36104D 36104G 36
104GCA 36104ZND 36105 36106 36107 36108 36109D 36117 36118D 36119 36120 36121 36126 36127 36
Blow Guns &Accessories200 38200D 38200E6 39200F8 39200K 38200NT-1 39200NT-2 39200NT-3 39200NT-4 39200NT-5 39200NTD 39200T 39201 38201D 38202 39202D 39204 E12 39204 E6 39204-30 37204-30-12 37204-30-6 37204-30A 37204-30ST 37204-30STD 37205 38205AT 38205ATD 38
205D 38206-30D 38208 37208D 37209 39211 38212 37213 39217D 37219D 37220T 38220TD 38221 39223TD 38226 38
Filters, Regulators,Lubricators, Gauges &Accessories1012-15 411012-160 411012-300 411012-60 411101-160 411101-60 411111-160 411112-160 411112-300 413000 413062 41, 433063 41, 433066 41, 433071 41-433072 413075 413076 41-433100 423159 42, 433161 42, 433162 42, 433163 423282 424010A-99 444011A-99 44
4020A-99 444021A-99 444024A-99 444030 444031 444032 444033 454040 444041 444050 444060 44, 454062 44, 474066A 474066A-99 44, 484066A-99 44,
48-504070 444071A-99 44, 46,
48, 494073 44, 47, 484074A-99 44, 45,
47-504079A-99 44, 45,
47-504092 44, 484093 44, 47-504094 44, 45,
47-504095 44, 45,
47-504096 44, 464097 454100 44, 454100D 454102 454115A-99 454118 454119 454125A-99 45, 504135 454141 454145 454155 454160 45-47
4161 454162A-99 45, 47,
50, 524165 45, 484167A 45, 47-504169 45, 484200 464210A-99 464211A-99 464215A-99 464220A-99 464221A-99 464225A-99 464226A-99 464230 464231 464235 464236 464240 464241 464242 464245 464246 464250 464255 464264 46, 484265A-99 464265A-99 48-504269 46, 48-504270A-99 464272 44, 46, 484282 464283 464285 46, 48-504286 46, 48-504300 474310A-99 474311A-99 474320A-99 474321A-99 474330 474331 474340 474341 47
Part No. Pg. No. Part No. Pg. No. Part No. Pg. No. Part No. Pg. No. Part No. Pg. No.
Numerical Index
Numerical IndexNumerical Index
86
4405 484410A-99 484411A-99 484420A-99 484421A-99 484430 484431 484440 484441 484450 484757 45, 47-504759 48, 49, 524760 45-47,
50, 524761 524762 524763 45, 46, 524769 524770 48-50, 524771 524772 44-47, 524773 45, 46, 524776 45, 47-504780 44, 46-484782 44, 46-504783 44-50
Barbed Hose Fittings398 53399 53401 53401S 53402 53404 53406 53406S 53408 53411D 53441 53442 53444S 53446S 53452 53461 53
463 53580 53581 53602 53602D 53606 53608 53802 53808 53814 53
Brass Hose Fittings324 55324F 553403RET 543404 543406 543408 54342F 55344 55344F 55344R 54344T 54344U 54344X 54346 55346F 55348F 55364F 55366 55366R 54366T 54366X 54368F 55388 55401L 54402L 54406L 54418 55419 55446SL 54520 55604 54
620 55623 55624 55828 55930 54931 54
Crimper & Ferrules3952-50 565029A-50 567242A-50 567321-50 567322-50 567323-50 567325-50 567326-50 567327-50 567328-50 567329-50 567330-50 567331-50 567332-50 567333-50 567334-50 567335-50 56845 56855 56856-1 56856-10 56856-2 56856-3 56856-4 56856-5 56856-7 56856-8 56856-9 56
Air Line Accessories1027 571220-1 571220-4 571220-8 571420 57
2109 572111 572112 572113 572114 57494-100 58494-100 58
Air Line & CoolantAccessories54-510 5854-515 5854-516 5854-517 58705 58706 58880 58880CS 58880N 58
Pneumatic Valves1304 59235 59240 59246 59250 59260 59710 59711 59
Mist Coolant Unit &Accessories270A 60270A-T 60273-4 6040 6040R 6041R 6043W 60
Recoil Hose &Accessories14-12 6114-25 61
14-50 6116-12 6116-25 6124-10 6224-20 6224-30 6226-10 6226-20A 6226-30 6228-10 6228-20 624-0 624-12 614-25 614-25D 614-25E 624-50E 625-50E 626-0 626-100 616-12 616-12A 616-25 616-25A 618-0 628-100 618-25 618-50 61
Hose Assemblies25L-24B 6425L-24BD 6425L-60BD 6428L-24BD 6428L-60B 6437L-24B 6437L-30B 6437L-30BD 6437L-72B 6437L-72BD 64506L-500 63, 64508L-500 63, 64512-100 63512-25 63
Part No. Pg. No. Part No. Pg. No. Part No. Pg. No. Part No. Pg. No. Part No. Pg. No.
Num
eric
al In
dex
Numerical IndexNumerical Index
88
512-50 63
512-500 63, 64
514-25A 63
514-50 63
514-50A 63
514-500 63, 64
515-50 63
515-50A 63
515-500 63, 64
522-100 63
522-50 63
524-100A 63
524-25 63
524-25A 63
524-50 63
535-50A 63
552-100A 63
552-50A 63
552-50A-30 63
554-100A 63
554-100A-54 63
554-25A 63
554-50A 63
554-50A-10 63
555-50A 63
576-25A 63
576-25A-10 63
576-50A 63
578-50A 63
578-50A-30 63
Air Hose Reels
500HR-RET 65
501HR-RET 65
502HR-RET 65
505HR-RET 65
510HR-RET 65
515HR-RET 65
520HR-RET 65
522HR-RET 65
525HR-RET 65
550HR-RET 65
Couplers & Plugs859W 72900 72C1 68C1-03 68C10 70, 71C10-23 70, 71C10-45 70, 71C1B 68C2 68C20 70C20-23 70C20-42 70C20-42B 70C20-42L 70C20-44 70C20-44B 70C20-44L 70C20B 70C21 70C21-03 70C21-03B 70C21B 70C2-23 68C2-42 68C2-44 68C2-44L 68C25 71C25-02 71C25-04 71C26 71C26-22 71C26-24 71C26-44 71C26-44L 71C26-45 71C27 67C28 67C2B 68C2R 69C2RB 69C30 72C31 72C35 68
C36 68C37 67C37-03 67C38 67C38-23 67C38-42 67C38-44 67C38B 67C40 71C45 68C46 68C5 69C5-04 69C6 69C60 67C61 67C6-24 69C6-44 69C6-45 69C7 69C8 69C9 70, 71C9-03 70, 71CP1 68CP10 70CP10-23 70CP1-03 68CP12 69CP1-42 68CP1-42L 68CP1-44 68CP1-44L 68CP17 71CP17-03 71CP17-45 71CP18 71CP1B 68CP2 68CP20 70CP20-23 70CP20B 70CP21 70CP21-03 70CP21-03B 70
CP21-42 70CP21-42L 70CP21-44 70CP21-44B 70CP21-44L 70CP21B 70CP22 70CP2-23 68CP25 71CP25-02 71CP25-04 71CP25-44 71CP25-44L 71CP25-45 71CP26 71CP26-22 71CP26-24 71CP27 67CP28 67CP2B 68CP33 72CP34 72CP35 68CP36 68CP37 67, 68CP37-03 67CP37-42 67CP37-44B 67CP37-44L 67CP38 67, 68CP37B 67CP38-23 67CP38B 67CP5 69CP5-42L 69CP5-44 69CP5-44L 69CP6 69CP6-24 69CP7 69CP8 69CP9 70CP9-03 70CP9-45 70
CPST2B 72CPST3B 72CPST5 72CPST5B 72CPST6 72CPST6B 72CPST7B 72CST17B 72CST1B 72CST4B 72CST6B 72CST8B 72
Special Valves
1468L-6 22
1498L-6 22
2755 22
4361S 22
556 22
5784 226116 22798 22
Valve Cores6035 27
Inflator Gauges, Hose& Equalizer1125 KIT 351125 KIT 10 351125 KIT 12 351125 KIT 15 351125 KIT 18 351125 KIT 19 351125 KIT 21 351125 KIT 3 351125 KIT 6 351125-100 351125-105 351125-110 351125-115 351125-120 351125-90 351125-95 35
Part No. Pg. No. Part No. Pg. No. Part No. Pg. No. Part No. Pg. No. Part No. Pg. No.
Identification Chart ActualSize
1/4"
CO
UP
LE
R1/
4" P
LU
G
INDUSTRIAL AUTOMOTIVE ARO LINCOLN DIAMOND-U
Telephone ...............................................................(800) 770-4639
Fax...........................................................................(815) 288-3388
Website URL......................................www.plews-edelmann.com
Route 38, Airport Industrial ParkDixon, IL 61021
© 2007 Printed in USA