Quick Manuel

R5300 Bluetooth Stereo Headset

1. Check the packing.

It contains 1 piece Bluetooth Headset and 1 piece USB Charging Cable.

2. Turn On/Turn Off.

Turn on the bluetooth headset, the Power Light is green. Turn off the bluetooth headset, the

Power Light is red.

Turn on:

Press and hold power for about 5 seconds, the headset beeps, and try to connect to the last

model to support HFP Bluetooth devices and the green indicator light flashes slowly. If the

headset has not been paired with any device, it will automatically enter pairing mode (green

light flashes quickly). When the headset is connected to a device and available for use, the

green light flashes slowly.

Turn off:

Please hold power key about 2 seconds. Headset beeps and the red light will be light up for a

while.

3. Match and connect.

a. If the headset had not matched with any device, please turn on the headphone first.

b. Once the headset matches with device, then the green light will flash rapidly.

c. If the headset has been paired with other devices, make sure that the headset is off, then

hold power button around 8 seconds until the green indicator light flashes quickly. Within 3

minutes, you can start the Bluetooth feature of the device to searche for Bluetooth device.

d. Please select this headset from the found list. Maybe you need to enter the password 0000 to

pair with your device and connect.

e. Once connected, then the green light will flash slowly.

4. Enjoy Music

a. If you enjoy music, please connect the headset to bluetooth device whic support A2DP

bluetooth mode.

b. Playing a song, please select the song from the music player, and then press the power

button.

c.To pause or resume playback, press the power button.

d. When there is a call in while enjoying music, the music player will be suspended, then it will

continue playing after the call ends.

5. Call

To answer or end a call, just one press the power button. To reject the call, please press the

power button continously.

6. 90-degree rotating ear

You can rotate the ear flat by 90 degree and then it is convenient to be carried.

7. Function

Volume knob:

- volume up : push upward

- volume down : push downward

Low voltage alarm functions - when the battery power is not enough, every 5 minutes headset

will buzz once, and red lights flashing

The automatic shutdown function - the headset will turned off when not connected in 30

minutes

Headset restore function: if headphones stops working, need to reset headphones, please let

earphones connected to charge line, at this time it will be reset.

8. battery charging

Please plug in USB charging line at the headphone jack cover from computer or any 5-V USB

adapter. When charging, the red light is on. It may take 3 hours for the battery to be fully

charged. When finished, the green light is on. It can provide up to 15 hours of talk time or 12

hours of music playing time.

9. troubleshooting

Solution 1.

1. determine the bluetooth connection equipment is open and working properly.

2.check the headset battery if electricity shortage, charging before use.

3.matching process, not at the same time open multiple bluetooth headset or bluetooth, also

have many sets of bluetooth headset, sure matching headset for boot state, close other

headphones, prevent interference matching process.

4. sure headphones in matching state and input the correct password bluetooth headset.

5. as above method is still can't solve problems, please to matching, reference headset

matching and that link.

Solution2

a. increase the volume of the headset

b.determine your headset and even at this time the equipment has been successful in

connection.

c. Short distance from to accept the phenomenon

Solution3

Check whether the transmitter has the same frequency equipment work, and other equipment

will be far away from the headset.

Connect operation caution

Use headphones in before, you must give the headset with compatible device matching and

connected to the headphones will be compatible devices.

1. Most headphones with eight device matching, but one can only its connected to a support

HFP mode and the other a support A2DP mode of the equipment.

2. You can use equipment through the headset play music.

3. The headset connected to the last use manual HFP model of equipment support (for example,

in the broken connection,) please close and then open the headset. You may need to

equipment for the corresponding setting, so that headphones can be connected to the

equipment.

4. Will connect to the last use headphones manual support A2DP mode of the equipment,

please short press the power button.

Battery and charging instructions

1. If it is first time use battery, or if the battery for a long time not to use, it may need to

connect the charging line, and then terminates the connection and to charge the battery to

start line.

2. If the battery power has completely exhausted, may need to wait for a few minutes, will be

charging instructions symbols.

3. Charging line need not when, please disconnect it with equipment link, please do not will

completely battery connection in charging online, because of the excessive charge will shorten

battery life, if already completely battery ashore battery itself in time will discharge.

4. Headphones in charge state can normal use.

Other matters needing attention

To get the best sound quality headphones effect, please correct headphones, earphones logo

on the L for the left, R for the right; Do not disassemble the hardware; Clean headset use dry,

soft cotton products, etc.;

We suggest that you take the following precautionary measures;

1. Please take the moderate volume enjoy music, in case of hearing a bad influence.

2. Please do not use this product in exposed liquid, moisture or moisture overweight

environment;

3. When the temperature exceeds set temperature range 0 degrees to 40 degrees, not the

operation of this product. (if the specified temperature range beyond environment, please close

equipment, let temperature stability in the operation of the specified scope to continue to

operate)

Wireless aspects instructions

This product launch for 2.4 GHz wireless frequency, meet European R & TTE Directive 1999/5 /

EC demand, the radiation not to damage the body (far less than the cell phone radiation)

wireless transmitting cause electromagnetic signals, such as in the use of cardiac pacemaker or

related auxiliary instrument body place, be careful.