MARTINI OUTDOOR ENG

lighting

out

1Index

contents by product

the company

lighting technology design

understanding the catalogue

street lighting

spotlights

urban

residential

basic lighting technology principles

symbols used

lamp index

photometric curves for the lamps

anti-vandal screw kit

index of codes/pages

2

4

8

9

14

118

168

212

318

320

322

328

330

332

Acuto Almira

BellBicubo

BilicoCeppoClasseDemi

EdoFratto QGiulius

HonoInoxaLars

Lux 98Lux 180/260Lux 350/400

MartinoMinitotem

Moove IP65Moove Palo

Naxos

10017818160802801748426829031610830631412012413616628415418234

NetworkNod

Novi 620/450/380Novi Palo

OsioOsio Pil

Piana 130/360/460PilaPilo

Pilo UpPolesRiga

Roof IP65 Sea

SettoSlim

SpilloSpritz

SquadraTotemTwin 4

Twin 1-2-3Wally

Walkie Car 160Walkie Car 230/300

Walkie EcoWalkie Plus

Walkie TalkieZen

25017019418825225621430329830120628831046172164280566627432/44148264224218228294230312

2New

New

New

Products - contents

Street lighting

Urban

Spotlights

Nod 170

Novi Palo 188

Moove Palo 182

Novi 620/450/380 192

Pali 206

Moove IP65154

Setto 172

Bicubo 160

Lux 350/400 136

Demi84

Martino 166

Lux 98120

Bell-Twin 4 18

Squadra66

Squadra-Bilico 80

Naxos-Twin 434

Slim 164

Twin 1-2-3 148

Lux 180/260 124

Acuto100

Spritz56

Hono108

Sea 46

Almira178

Classe174

3contents - Products

Residential

Network 250

Walkie Eco 228

Piana 214

Pila 303

Lars314

Totem 274

Wally 264

Pilo 298

Walkie Plus294

Fratto Q 290

Inoxa 306

Roof IP65310

Zen312

Edo 268

Walkie Talkie 230

Walkie Car 230/300 218

Riga 288

Pilo Up 301

Osio Pil 256

Ceppo - Spillo 280

Minitotem 284

Giulius316

Osio 252

Walkie Car 160 224

5The company

In 1925 Timoteo Martini, father of the current chairman, founded Lampadari Martini, a small company producing professionally crafted lighting fixtures in Milan. The Martini Illuminazione Group comprises Martini S.p.A. (established in 1971 at Concordia sulla Secchia in the province of Modena), Sames S.p.A (purchased in 1995 and transferred from Moncalieri to the same manufacturing premises) and, since 2006, Sothis (a company specialising in the production of decorative STRASS glass lamps). In over eighty years of commercial activity, the group has become a leading organisation within the industry. The Martini group conducts in-depth research into product design and construction, and monitors the technical lighting performance of the resulting fixtures. This means a vast array of products can be used in a variety of ways, from indoor lighting for offices and workplaces, commercial environments, reception areas, cultural sites and museums to outdoor applications such as urban and street lighting. 170 people are employed at the Martini Illuminazione group manufacturing sites, which cover a total area of 21,500 square metres.

Through the consolidated experience of a large team of architects and lighting designers, Martini has been offering assistance in the design and development of lighting schemes for years, from the preliminary research phase right through

to the selection of individual products and technical lighting calculations.The requirements of each project are always carefully assessed, so as to guide the design and check the actual impact of the light on the environment, in order to adhere to the standards governing every indoor and outdoor installation. Martini group designers use technical lighting calculation software to offer solutions which enhance the various product and light source types, optimising performance and comfort and therefore saving energy in every architectural context (through the application of outdoor LED products, for example).A lighting technology design centre has recently been established in Milan and showrooms opened in Rome, Moscow and Saint Petersburg as part of a constantly-evolving programme.

All fixtures are designed for use in conjunction with the most up-to-date light sources: halogen, fluorescent, metal halide and sodium vapour, with particular emphasis on LED technology; they are also subjected to an ISO 9001 certified quality control process, during which they are tested and checked in our own in-house laboratory. Special attention is also given to making sure that current legislation is observed in all relevant countries, and that the technical and lighting features of the products are assessed and certified correctly.

6The company

The products are designed using the most up-to-date modelling and three-dimensional prototyping software, in accordance with ISO EN 9001-2008 quality system procedures. A group of in-house technicians designs and develops reflectors using special software which checks data accuracy and helps to optimise performance in terms of the energy used; the calculated values are then verified in the test laboratory.

Departments are created in accordance with the latest logistics criteria, and structured so that components and semi-processed parts can be located quickly through barcode management. Specialist staff are given continuous training to guarantee reliability and quality during all processing phases.The processes are supported by semi-automated equipment, which helps to reduce lighting fixture manufacturing times. Furthermore, at the end of the line, full functional tests are conducted on the finished product.

Research and development

Mechanics workshop

7The company

Assembly department

Shipping warehouse

Painting department

8Lighting technology design

Commercial spacesKuwait City Shop (Kuwait)

Urban areasParco Leonardo, Rome (Italy)

WorkplacesAlcopa Project (Russia)

The company has accumulated a wealth of experience in the field of lighting technology over a period of many years; coupled with its close partnerships with designers and architects, this has led to the creation of many technical solutions for indoor lighting, urban lighting and the accent lighting used to enhance buildings and monuments.Our planning and design research is carried out across Italy and overseas. It is extremely flexible and can be adapted to suit the requirements of each customer, offering continuous support so as to develop the best possible technological solutions.

Museum applicationsGalereya Slavinskogo (Russia)

designer

photometric data

installation examples

9Demi armatura stradale Demi

design: Lapo Grassellini

Risultato del connubio tra ricerca este-tica e innovazione tecnologica Demi un apparecchio dalla forma classica ed elegante, equipaggiato con i migliori componenti tecnici.Proposto con molteplici tipi di bracci e tre tipi di ottiche: stradale, rotosimmetri-ca e sidewalk. Demi risponde perfetta-mente alle molteplici esigenze dellillu-minazione stradale e urbana.

ottica stradale ottica sidewalk otticarotosimmetrica

16 17

6868 8686

70W

SHP-EE27

100W

MH-TE40

100W

SHP-TE40

70W

MH-TE27

70W

SHP-TE27

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

70W

MHG12

ottica rotosimmetrica DemiDemi ottica stradale

Sorgente Potenza Attacco P[Kg] Codice

SHP 70W E27 11,0 75238.68MH-T / SHP-T 70W E27 11,0 75239.68MH-T / SHP-T 100W E40 11,5 75240.68MH-T / SHP-T 150W E40 12,0 75241.68MH-T 250W E40 12,5 75242.68SHP-T 250W E40 12,5 75243.68

241

520

IP66 0,10alimentazione elettromagnetica integrata

Sorgente Potenza Attacco P[Kg] Codice

MH 35W G12 11,0 75254.68MH 70W G12 11,0 75255.68MH 100W G12 12,0 75256.68

IP66 0,10alimentazione elettromagnetica integrata

241

520

22 23


armatura stradale DemiDemi

Tipologie di ottiche

CorpoCalotta in lamiera di alluminio, anello e corpo in alluminio pressofuso, vetro pia-no temprato, ottica in alluminio, viti in acciaio inox e componenti che garanti-scono un grado di protezione IP66 e una classe di isolamento II.Apertura del vano ottico dal basso me-diante due viti in acciaio inox.

SorgentiLampade ad alogenuri metallici tubolari da 70W a 250W, lampade al sodio ad alta pressione da 70W a 250W e lam-pada da 70W elissoidale al sodio. Nella

versione rotosimmetrica lampada da 35W a 100W ad alogenuri metallici con attacco G12.

EmissioniDisponibile nella versione stradale , roto-simmetrica e sidewalk.

AlimentazioniElettrificazione di tipo elettromagnetico con condensatore di rifasamento e ac-cenditore temporizzato.

ColoriGrigio satinato.

bilaterale alternata

Esempi di istallazioni

unilateralestrada e ciclopedonale

ottica stradale ottica sidewalk

valvola di compensazione della pressione

Manto stradale C2, q0=0,070H= altezza apparecchio [m]B= larghezza strada [m]I= distanza fra i pali [m]Lm= luminanza media mantenuta [cd/m ]Uo= uniformit generale della luminanzaUL= uniformit longitudinale della luminanzaTI= indice di abbagliamento fisiologico [%]Em= illuminamento medio [lx] Emin= illuminamento minimo [lx]

MH-T 70W E27

H B I Em Emin

4,00 4,00 18,50 20 5

SHP-T 250W E40

H B I Lm Uo UL TI

10,00 10,00 37,00 1,2 0,4 0,7 10

Ottica sidewalk

Lottica sidewalk ideale per percorsi pedonali e piste ciclabili, pu essere abbinata all'ottica stradale senza inteferire con il traffico veicolare; il sistema ottico permette di ottenere elevate interdistanze con conseguente risparmio energetico.Categoria illuminotecnica: S1

Ottica stradale

Lottica stradale studiata e realizzata in modo da concentrare la maggior parte del flusso sul manto stradale prospicente con conseguente riduzione delle installazioni, dei costi di manutenzione e di energia elettrica.Il sistema ottico permette di ottenere un'elevata e uniforme luminanza della carreggia-ta garantendo contemporaneamente la limitazione dell'abbagliamento.Categoria illuminotecnica: ME3a

ottica rotosimmetrica

18 19

Understanding the catalogue

Martini S.p.A. has a policy of constant product research and development. We therefore reserve the right to remove products from the catalogue or to modify any parts, details or finishes considered necessary to the improvement of the technical performance or appearance of a product, or in response to construction-related or commercial requirements. These changes may be made at any time and without notice. The layouts and colours shown in the photographs are for illustrative purposes only.

designer

colour finish

technical dataclassification

photometric data

fixture code

fixture name

description

focus of the range

product photograph

fixture namedesigner

product photograph

product features

product focus

still life/setting

types of optic

installation examples

diagram, measurements in mm

Total weight of the fixture (Kg), packaging included.

10


colour codes

light sources

00 standard32 embossed-effect grey38 extra-light grey68 satin-finish grey86 anthracite grey79 corten finishing

INC incandescent lampsAL halogen lampsFL fluorescent lampsMH metal halide lampsSHP high-pressure sodium lampsSHP-E high-pressure sodium lampsLEDs Light Emitting Diodes

NOTE: Fixtures in the catalogue are supplied without lamps unless otherwise stated.

code composition example

lamp family progressive number

product family wiring or other option

light source colour code

Light source Wattage Socket Code

FL TC-L 218 W 2G11 76888.68__

1111


Satin-finish grey

Anthracite grey

Corten finishing

14

3

SHP

MH

128

armatura stradale a tenuta stagna IP65 Naxos 460 - emissione luminosa stradale

Grigiocod. 32

SHP-T, 1x250W E40alimentazione elettromagnetica

ottica stradale

apparecchio 75067.32


ottica stradale


MH-T, 1x100W E40alimentazione elettromagnetica

ottica stradale



ottica stradale



ottica stradale



ottica stradale


Per accessori vedi pag. 139Per gamma pali vedi pag. 140/141

Per braccio Twin 4 vedi pag. 133Per curve fotometriche vedi pag. 144

ESTERNI ED ARREDO URBANO

3

SHP

MH

128

211

46

0

36

5

282


Grigiocod. 32


ottica stradale



ottica stradale



ottica stradale



ottica stradale



ottica stradale



ottica stradale





Bell / Twin 4

Naxos / Twin 4

Sea

Spritz

Bell 460 28

Naxos 57041

Bell 570 29

Twin 4 44

Bell 380 25

Naxos 46040

Sea 46054

Spritz 46064

Sea 38052

Spritz 38062

Twin 4 32

15

New

New

Street lighting

spotlight 70

arm type 174

arm type 378

arm type 276

Bilico arm80

street fixture 90

rotosymmetrical91

sidewalk92

Hono 460 116

Hono 380 115

Demi

Squadra / Squadra-Bilico

Hono

sidewalk106

street fixture 104

Acuto

16

Demi

Bell

Squadra

Squadra-Bilico Naxos

Acuto

Spritz HonoSea

Street lights

17

t01:00 03:00 04:41 07:00 09:00 11:00

W

100

50

70

W

t

100

50

01:00 03:00 05:00 07:00 09:00 11:00

Control gear customisation

Electromagnetic control gear with ignitor and PFC capacitor (standard version).

Electromagnetic unitFull-power operation for the entire operating cycle.

Electronic unit with flow adjuster Combined full-power and reduced-power operation.

Electronic control gear with integrated flow adjuster that reduces energy consumption and allows for operating the SHP lamp at both full-power or reduced-power, which ensures up to 35% energy saving when operating the system. Device available for 70W, 100W and 150W SHP lamps.

Thanks to the electronic control gear installed on each fixture, the light flow can be adjusted to save energy without having to mount control systems upstream of the circuit.

To order the street light equipped with electronic control gear and flow adjuster, it is necessary to add the suffix R to the code.

SPECIFICATIONS

Power supply 230V~50Hz (180-260V~)

Efficiency 0.93

Operating temperature -40C / +50C

Output power (W) 70W / 100W / 150W

Timer (fixed programming) h 04:41 min

Dimensions (WxDxH) 97.3x167x53 mm

Power factor correction cos >0.8

Weight 1,150 g

Advantages:- single fixtures can be controlled - significant energy saving- longer average lamp life- reduction in operating costs- compact dimensions for any type

of fixture- reduced amortisation period

18

Bell / Twin 4 programme

design: Studio Archea

Bell 380

Bell 460

19

Bell / Twin 4

Bell, with its distinctive asymmetrical double truncated cone shape, is available in three sizes with various optics, meaning the fixtures can be used in town centres, along cycle lanes and in traditional street lighting schemes.The various versions are available with two types of projection, one asymmetrical for large spaces directly in front of the installation and one "street" type model with lateral projection. Bell 380 is recommended for pathways, pedestrian walkways and cycle lanes; Bell 460 and 570 for motorised traffic routes, motorway slip roads and roundabouts. The light projection features of the street reflector used in Bell 460 and 570 include excellent uniformity, wide spacing and a low level of glare, regardless of whether metal halide lamps or high-pressure sodium lamps are used. The flat transparent glass and the carefully designed optic guarantee excellent performance levels and light distribution in both street and asymmetrical versions.

Bell 570

20

Bell / Twin 4 programme

Types of optic

Road surface C2, q0=0.070H= fixture height [m]B = road width [m]I= distance between poles [m]Lm= average maintained luminance [cd/m2]Uo= general uniformity of luminance UL= longitudinal uniformity of luminance TI= physiological glare index [%]Em= average illuminance [lx] Emin= minimum illuminance [lx]

MH 70 W RX7s

H B I Em Emin

5.00 8.00 14.00 20 5

MH 70 W RX7s

H B I Em Emin

4.00 4.00 17.50 22 5

MH 150 W E40

H B I Lm Uo UL TI

8.00 8.00 28.50 1.2 0.4 0.6 6

Sidewalk optic

The sidewalk optic is ideal for pedestrian walkways and cycle paths, and can be combined with the street optic without interfering with road traffic; the optic system also helps to save energy by increasing spacing distances.Illumination class: S1

Asymmetrical optic

Frontal projection for large spaces. Where this optic is used, fixtures can be installed around the perimeter of the area to be illuminated.Illumination class: S1

Street optic

The street optic has been designed so as to concentrate most of the light it produces onto the road surface below, meaning that fewer installations are required and thus limiting maintenance and electricity costs.The optic system can be used to achieve high and uniform luminance on the road while limiting glare.Illumination class: ME3b

21

programme Bell / Twin 4

22

4,000

6,000

8,000

10,000

22

Bell street fixture

fixed attachmentadjustableattachment

the Bell pole-top street fixture is available in single, double, triple and tower configurations.

23

street fixture Bell

Alignment adjustment

Adjustable pole and wall-mounting system means the fixture can be positioned so that it is perfectly parallel to the ground. The photograph illustrates how the fixture can be rotated between 0 and + 20.

Easy installation

The installation steps are simple and require only one operator.After installation, the cable is no longer visible.

Opening the ring by rotating it a turn.

Rotating the parabolic optic by 5; disconnecting the 2-pole electrical connector in order to remove the optic from the body.

Rotating the electrified plate by 5; disconnecting the 3-pole electrical connector in order to view the electrical components.

The closure ring can be removed in order to make maintenance procedures easier for the installer.

Accessing the fixture

The glass support ring is hinged to the body of the fixture, offering simplified maintenance.

Safety during maintenance

All versions are fitted with a mechanical disconnection switch which cuts the electricity supply off when the ring is opened.

Installing the street fixture

The simplicity of the fixture and its accessories means the installation procedure can be carried out by just one operator. All components inside the end cap are fixed together using a steel cable and secured to the die-cast aluminium body.

No tools required for maintenance

The special design of the fixture has made it possible to obtain a versatile and functional product which can be installed by any operator and which is suitable for use in complex overall arrangements (e.g. traffic-heavy roads, town centres, etc.). The option of unfastening the various components (see illustrations) without the use of tools makes it a unique product amongst street fixtures.

24


Bell 380/460/570 street fixture

BodyThe body (available in three sizes: 380/460/570) and the glass support ring are made using die-cast aluminium, and the pole-mounting device is in cast aluminium. The ring is recessed and fixed in place by four stainless steel 1/4 turn captive knobs, which hold the ring against the gasket; the ring is also hinged using a concealed system which facilitates maintenance procedures. The safety glass is temepered. The fixture is subjected to anti-oxidation treatment and given an embossed paint finish with high surface resistance, which makes it suitable for outdoor installation.

Light sourcesMetal halide and high-pressure sodium lamps from 70 W to 250 W.

EmissionsSidewalk, asymmetrical and street optics.

Power supplyThe wiring is electromagnetic, with a capacitor and timed ignitor to protect the components when the lamps are exhausted and no longer work. The wiring assembly is installed on an extractable bracket fitted with quick connectors.

AccessoriesPole attachment with 1, 2, 3 and 4 arms and adjustable attachment. Fixed and adjustable wall attachment.

Colours Embossed-effect grey, anthracite grey or corten finishing.

25

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

176 28

9

2

85

3

80

86 7932

street fixture Bell 380

Light source Wattage Socket W [kg] Code

MH 35 W G12 11.0 76961.__MH / SHP 70 W RX7s 11.0 76966.__MH / SHP 150 W RX7s-24 11.5 76967.__

IP65 0.078 m2

integrated electromagnetic control gear

sidewalk optic


MH 35 W G12 10.0 76962.__MH / SHP 70 W RX7s 10.0 76968.__MH / SHP 150 W RX7s-24 10.5 76969.__

IP65 0.078 m2


asymmetrical optic

26

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

120

110

113

120

110

113

86 7932

Bell 380 components

60 H = 105 78024.__ 89 H = 105 78028.__ 102 H = 105 78032.__ 120 H = 155 78134.__ 142 H = 180 78136.__ 171 H = 180 78138.__

60 H = 105 78025.__ 89 H = 105 78029.__ 102 H = 105 78033.__ 120 H = 155 78135.__ 142 H = 180 78137.__ 171 H = 180 78139.__

60 H = 105 78026.__ 89 H = 105 78030.__ 102 H = 105 78034.__

60 H = 105 78027.__ 89 H = 105 78031.__ 102 H = 105 78035.__

60 H = 105 78036.__ 89 H = 105 78037.__ 102 H = 105 78038.__

78039.__

78110.__

pole joint 1 arm

pole joint 2 arms

pole joint3 arms

pole joint4 arms

pole jointadjustable(from 0 to +20)

wall attachmentfixed

wall attachment adjustable(from 0 to +20)

+ +

guide to ordering

fixture pole page 206 joint

27

Bell 380

28

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

211 34

6

3

65

4

60

86 7932

Bell 460 street fixture


MH-T / SHP-T 100 W E40 14.5 76979.__MH-T / SHP-T 150 W E40 15.0 76973.__MH-T 250 W E40 16.0 76975.__SHP-T 250 W E40 16.0 76977.__

IP65 0.112 m2

integrated electromagnetic control gear; dual wattage ballast for SHP-T lamp available on request

road optic



IP65 0.112 m2


asymmetrical optic

29

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

261 4

28

4

64

5

70

86 7932

street fixture Bell 570


MH-T / SHP-T 100 W E40 22.5 76996.__MH-T / SHP-T 150 W E40 23.0 76990.__MH-T 250 W E40 24.0 76992.__SHP-T 250 W E40 24.0 76994.__MH-T / SHP-T 400 W E40 24.5 76998.__

IP65 0.164 m2


asymmetrical optic

30

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

261 4

28

4

64

5

70

86 7932

Bell 570 street fixture


MH-T / SHP-T 100 W E40 22.5 76997.__MH-T / SHP-T 150 W E40 23.0 76991.__MH-T 250 W E40 24.0 76993.__SHP-T 250 W E40 24.0 76995.__MH-T / SHP-T 400 W E40 24.5 76999.__

IP65 0.164 m2


road optic

31

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

140

160

115

140

160

115

86 7932

components Bell 460/570

60 H = 155 78074.__ 89 H = 155 78078.__ 102 H = 155 78082.__ 120 H = 155 78086.__ 142 H = 180 78090.__ 171 H = 180 78094.__

60 H = 155 78075.__ 89 H = 155 78079.__ 102 H = 155 78083.__ 120 H = 155 78087.__ 142 H = 180 78091.__ 171 H = 180 78095.__

102 H = 155 78084.__ 120 H = 155 78088.__ 142 H = 180 78092.__ 171 H = 180 78096.__

78099.__

78111.__

pole joint 1 arm

pole joint2 arms

pole joint3 arms

pole joint4 arms



wall attachmentadjustable(from 0 to +20)

102 H = 155 78085.__ 120 H = 155 78089.__ 142 H = 180 78093.__ 171 H = 180 78097.__

60 H = 155 78100.__ 89 H = 155 78101.__ 102 H = 155 78102.__ 120 H = 155 78103.__ 142 H = 180 78104.__ 171 H = 180 78105.__

+ +

guide to ordering


3232

Twin 4 arms for Bell 460/570

Illustration of the Twin 4 double arm system for Bell 460 and Bell 570.Satin-finish grey painted steel arm structure, cast aluminium pole attachment and stainless steel component fixing screws.

Twin 4 single arm systemL = 1200 mm


33

1000

540

1300

648

H

2600

648

540

H

2000

86 7932

arms for Bell 460/570 Twin 4

Twin 4 single arm 1200 code 78115.__

double joint 102 H = 155 78009.__ 120 H = 155 78013.__ 142 H = 180 78017.__ 171 H = 180 78021.__

102 H = 155 78008.__ 120 H = 155 78012.__ 142 H = 180 78016.__ 171 H = 180 78020.__

single joint


Twin 4 double arm 1500code 78130.__


+ + +

guide to ordering

fixture pole page 206 joint (1-piece pack) arm

34

Naxos / Twin 4 programme


Naxos 460

Naxos 460

35

Naxos / Twin 4

The Naxos range, with its distinctive asymmetrical truncated cone shape, consists of two different-sized versions featuring different optics, meaning the fixtures can be used in town centres and in traditional street lighting schemes.All versions of Naxos are available with two types of projection, one asymmetrical for large spaces directly in front of the installation and one "street" type model with lateral projection. The light projection features of the street reflector include excellent uniformity, wide spacing and a low level of glare, regardless of whether metal halide lamps or high-pressure sodium lamps are used.The flat transparent glass and the carefully designed optic guarantee excellent performance levels and light distribution in both street and asymmetrical versions.

Naxos 570

36

Naxos / Twin 4 programme

Wall-mounted installation eliminates the need for a pole in applications where space is limited and guarantees continuity, whether street or asymmetrical fixtures are used.

Types of optic

Installation examples

Bilateral, in the centre of the road


MH-T 100 W E40

H B I Em Emin

8.00 12.00 17.00 15.00 7

MH-T 150 W E40

H B I Lm Uo UL TI

8.00 8.00 29.60 1.2 0.4 0. 6 6

Asymmetrical optic


Street optic


37

programme Naxos / Twin 4

38

+20

4,000

6,000

8,000

10,000

Naxos street fixture

fixed joint

adjustable attachment from 0 to + 20

the Naxos street fixture is available in single, double, triple and tower configurations.

39


street fixture Naxos 460/570

BodyThe body (available in two sizes: 460/570) and glass support ring are made using die-cast aluminium, while the pole-fixing system is made using cast aluminium and the arm is made using steel. The ring is recessed and locked in place using four captive screws which hold the ring against the gasket; it is also hinged using a concealed system in order to facilitate maintenance procedures.Tempered safety glass and aluminium reflector fixed to the body.All models are fitted with a disconnection switch in order to guaranteee maximum safety during maintenance procedures.

Light sourcesMetal halide and high-pressure sodium lamps from 70 W to 250 W, with E40 socket.

EmissionsAsymmetrical and street optics.

Power supplyThe wiring is electromagnetic, with a capacitor and timed ignitor to protect the components when the lamps are exhausted and no longer work. The wiring assembly is installed on an extractable bracket fitted with quick connectors.The wide choice of lamps and wattage levels available guarantees maximum flexibility of application, in the lighting of both public and private areas.



side hinge on glass support ring

mechanical disconnection switch

concealed electricity cable

40

3

SHP

MH

128

65IP

SHP-T E40

65IP

MH-T E40

65IP

MH-T E40

65IP

SHP-T E40

65IP

SHP-T E40

65IP

MH-T E40

211

46

0

36

5

282


Grigiocod. 32


ottica stradale



ottica stradale



ottica stradale



ottica stradale



ottica stradale



ottica stradale





100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

211

3

65

4

60

86 7932

Naxos 460 street fixture



IP65 0.083 m2


road optic

IP65 0.083 m2


asymmetrical optic



41

3

SHP

MH

128

65IP

SHP-T E40

65IP

MH-T E40

65IP

MH-T E40

65IP

SHP-T E40

65IP

SHP-T E40

65IP

MH-T E40

211

46

0

36

5

282


Grigiocod. 32


ottica stradale



ottica stradale



ottica stradale



ottica stradale



ottica stradale



ottica stradale





100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

261

4

75

5

70

86 7932

street fixture Naxos 570





IP65 0.125 m2


road optic

IP65 0.125 m2


asymmetrical optic

42

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

140

160

115

140

160

115

86 7932

+ +

Naxos 460/570 components

60 H = 155 78074.__ 89 H = 155 78078.__ 102 H = 155 78082.__ 120 H = 155 78086.__ 142 H = 180 78090.__ 171 H = 180 78094.__

60 H = 155 78075.__ 89 H = 155 78079.__ 102 H = 155 78083.__ 120 H = 155 78087.__ 142 H = 180 78091.__ 171 H = 180 78095.__

102 H = 155 78084.__ 120 H = 155 78088.__ 142 H = 180 78092.__ 171 H = 180 78096.__

78099.__

78111.__

pole joint1 arm

pole joint2 arms

pole joint3 arms

pole joint4 arms




102 H = 155 78085.__ 120 H = 155 78089.__ 142 H = 180 78093.__ 171 H = 180 78097.__

60 H = 155 78100.__ 89 H = 155 78101.__ 102 H = 155 78102.__ 120 H = 155 78103.__ 142 H = 180 78104.__ 171 H = 180 78105.__

guide to ordering


43

Naxos

44

Twin 4 arm for Naxos 460 - 570

Illustration of the Twin 4 double arm system for Naxos 460 and Naxos 570.Satin-finish grey painted steel arm atructure, cast aluminium pole attachment and stainless steel component fixing screws.



45

1000

540

1300

648

H

2600

648

540

H

2000

86 7932

+ + +

arm for Naxos 460/570 Twin 4

guide to ordering

fixture pole page 206 joint (1-piece pack) arm


double joint 102 H = 155 78009.__ 120 H = 155 78013.__ 142 H = 180 78017.__ 171 H = 180 78021.__

102 H = 155 78008.__ 120 H = 155 78012.__ 142 H = 180 78016.__ 171 H = 180 78020.__

single joint




46

Sea street fixture


Sea 380

Sea 460

4747

Sea

The Sea range, with its distinctive truncated cone shape and cylindrical top part, consists of two different-sized versions featuring different optics, meaning the fixtures can be used in town centres, along cycle lanes and in traditional street lighting schemes.Sea versions are available with three types of projection, one asymmetrical for large spaces directly in front of the installation, one sidewalk type and one "street" type model with lateral projection. Sea 380 is recommended for pathways, pedestrian walkways and cycle lanes; Sea 460 is recommended for motorised traffic routes, motorway slip roads, roundabouts and vehicle transit and loading/unloading areas near buildings.The light projection features of the street reflector used in Sea 460 include excellent uniformity, wide spacing and a low level of glare, regardless of whether metal halide lamps or high-pressure sodium lamps are used.The flat transparent glass and the carefully designed optic guarantee excellent performance levels and light distribution in both street and asymmetrical versions.

Sea 460

48

Sea street fixture

Types of optic

MH 70 W RX7s

H B I Em Emin

6.00 8.00 16.00 17 5

MH 70 W RX7s

H B I Em Emin

4.00 4.00 16.00 21 5

MH-T 150 W E40

H B I Lm Uo UL TI

8.00 7.00 29.60 1.2 0.4 0.5 7

Sidewalk optic


Asymmetrical optic


Street optic

The street optic has been designed so as to concentrate most of the light it produces onto the road surface below, meaning that fewer installations are required and thus limiting maintenance and electricity costs.The optic system can be used to achieve high and uniform luminance on the road while limiting glare.Illumination class: ME3c


49

street fixture Sea

50

+20

4,000

6,000

8,000

10,000

50

Sea street fixture

the pole-mounted Sea street fixture is available in single, double, triple and tower configurations.fixed joint

adjustable joint from 0 to + 20

51


street fixture Sea 380/460

BodyBody (available in two sizes: 380/460) and glass support made using die-cast aluminium and pole-fixing system made using cast aluminium.The ring is recessed and locked in place using four captive screws which hold the ring against the gasket; it is also hinged using a concealed system in order to facilitate maintenance procedures.Tempered safety glass and aluminium reflector fixed to the body.All models are fitted with a disconnection switch in order to guaranteee maximum safety during maintenance procedures.









52

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

202

2

85

3

80

86 7932

Sea 380 street fixture


MH / SHP 70 W RX7s 9.40 75144.__MH / SHP 150 W RX7s-24 9.40 75145.__

IP65 0.067 m2


sidewalk optic



IP65 0.067 m2


asymmetrical optic

53

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

120

110

113

120

110

113

86 7932

components Sea 380

60 H = 105 78024.__ 89 H = 105 78028.__ 102 H = 105 78032.__ 120 H = 155 78134.__ 142 H = 180 78136.__ 171 H = 180 78138.__

60 H = 105 78025.__ 89 H = 105 78029.__ 102 H = 105 78033.__ 120 H = 155 78135.__ 142 H = 180 78137.__ 171 H = 180 78139.__

60 H = 105 78026.__ 89 H = 105 78030.__ 102 H = 105 78034.__

60 H = 105 78027.__ 89 H = 105 78031.__ 102 H = 105 78035.__

60 H = 105 78036.__ 89 H = 105 78037.__ 102 H = 105 78038.__

78039.__

78110.__

pole joint 1 arm

pole joint 2 arms

pole joint3 arms

pole joint4 arms



wall attachmentadjustable(from 0 to +20)

+ +

guide to ordering


54

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

245

3

65

4

60

86 7932

Sea 460 street fixture



IP65 0.094 m2


road optic



IP65 0.094 m2


asymmetrical optic

55

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

140

160

115

140

160

115

86 7932

components Sea 460

60 H = 155 78074.__ 89 H = 155 78078.__ 102 H = 155 78082.__ 120 H = 155 78086.__ 142 H = 180 78090.__ 171 H = 180 78094.__

60 H = 155 78075.__ 89 H = 155 78079.__ 102 H = 155 78083.__ 120 H = 155 78087.__ 142 H = 180 78091.__ 171 H = 180 78095.__

102 H = 155 78084.__ 120 H = 155 78088.__ 142 H = 180 78092.__ 171 H = 180 78096.__

78099.__

78111.__

pole joint1 arm

pole joint 2 arms

pole joint3 arms

pole joint4 arms


wall attachment fixed


102 H = 155 78085.__ 120 H = 155 78089.__ 142 H = 180 78093.__ 171 H = 180 78097.__

60 H = 155 78100.__ 89 H = 155 78101.__ 102 H = 155 78102.__ 120 H = 155 78103.__ 142 H = 180 78104.__ 171 H = 180 78105.__

+ +

guide to ordering


56

Spritz street fixture

design: Luca Trazzi

The Spritz range, with its distinctive truncated cone shape, consists of two different-sized versions featuring different optics, meaning the fixtures can be used in town centres, along cycle lanes and in traditional street lighting schemes.The various versions of Spritz are available with two types of projection, one asymmetrical for large spaces directly in front of the installation and one "street" type model with lateral projection. Spritz 380 is recommended for pathways, pedestrian walkways and cycle lanes; Spritz 460 is recommended for motorised traffic routes, motorway slip roads, roundabouts and vehicle transit and loading/unloading areas near buildings.

The light projection features of the street reflector used in Spritz 460 include excellent uniformity, wide spacing and a low level of glare, regardless of whether metal halide lamps or high-pressure sodium lamps are used.The flat transparent glass and the carefully designed optic guarantee excellent performance levels and light distribution in both street and asymmetrical versions.

Spritz 380

5757

Spritz

Spritz 460

58


Types of optic

Road surface C2, q0=0.070H= fixture height [m]B = road width [m]I= distance between poles [m]Lm= average maintained luminance [cd/m2]Uo= ratio of minimum luminance to average luminance over the entire carriageway surfaceUL= ratio of minimum luminance to maximum luminance along the centre line between each laneTI= debilitating glare index

MH-T 100 W E40

H B I Em Emin

8.00 12.00 16.50 15 6

MH 70 W RX7s

H B I Em Emin

4.00 4.00 17.50 22 5

MH-T 150 W E40

H B I Lm Uo UL TI

8.00 7.00 29.60 1.2 0.4 0.5 7

Sidewalk optic


Asymmetrical optic


Street optic


59

street fixture Spritz

60

+20

4,000

6,000

8,000

10,000

60


fixed jointadjustable jointfrom 0 to 20

the pole-mounted Spritz street fixture is available in single, double, triple and tower configurations.

61

design: Luca Trazzi

street fixture Spritz 380/460

BodyCast aluminium body available in two sizes (380/460) and die-cast aluminium glass support; cast aluminium pole-fixing system.The ring is recessed and locked in place using four captive screws which hold the ring against the gasket; it is also hinged using a concealed system in order to facilitate maintenance procedures.Tempered safety glass and aluminium reflector fixed to the body.All models are fitted with a disconnection switch in order to guaranteee maximum safety during maintenance procedures.









62

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

207

290

2

85

3

80

86 7932

Spritz 380 street fixture



IP65 0.073 m2


sidewalk optic



IP65 0.073 m2


asymmetrical optic

63

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

120

110

113

120

110

113

86 7932

components Spritz 380

60 H = 105 78024.__ 89 H = 105 78028.__ 102 H = 105 78032.__ 120 H = 155 78134.__ 142 H = 180 78136.__ 171 H = 180 78138.__

60 H = 105 78025.__ 89 H = 105 78029.__ 102 H = 105 78033.__ 120 H = 155 78135.__ 142 H = 180 78137.__ 171 H = 180 78139.__

60 H = 105 78026.__ 89 H = 105 78030.__ 102 H = 105 78034.__

60 H = 105 78027.__ 89 H = 105 78031.__ 102 H = 105 78035.__

60 H = 105 78036.__ 89 H = 105 78037.__ 102 H = 105 78038.__

78039.__

78110.__

pole joint 1 arm

pole joint 2 arms

pole joint3 arms

pole joint4 arms




+ +

guide to ordering


64

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

251

350

3

65

4

60

86 7932

Spritz 460 street fixture



IP65 0.106 m2


road optic



IP65 0.106 m2


asymmetrical optic

65

H

10

4

H

10

4

H

10

4

H

10

4

H

12

4

140

160

115

140

160

115

86 7932

components Spritz 460

60 H = 155 78074.__ 89 H = 155 78078.__ 102 H = 155 78082.__ 120 H = 155 78086.__ 142 H = 180 78090.__ 171 H = 180 78094.__

60 H = 155 78075.__ 89 H = 155 78079.__ 102 H = 155 78083.__ 120 H = 155 78087.__ 142 H = 180 78091.__ 171 H = 180 78095.__

102 H = 155 78084.__ 120 H = 155 78088.__ 142 H = 180 78092.__ 171 H = 180 78096.__

78099.__

78111.__

pole joint 1 arm

pole joint2 arms

pole joint3 arms

pole joint4 arms




102 H = 155 78085.__ 120 H = 155 78089.__ 142 H = 180 78093.__ 171 H = 180 78097.__

60 H = 155 78100.__ 89 H = 155 78101.__ 102 H = 155 78102.__ 120 H = 155 78103.__ 142 H = 180 78104.__ 171 H = 180 78105.__

+ +

guide to ordering


66

Squadra

design: Matteo Nunziati, Alessandro Scandola

with Bilico armpage 80

wall-mountedpage 70

with arm type 1page 74

for a wider range, see catalogue

67

Squadra

The Squadra range offers many different fixture, arm and pole combinations, meaning it is suitable for a large number of applications which integrate into the surrounding environment. The lighting designer can tailor the individual system features by installing symmetrical, asymmetrical, sidewalk and street optics.



68

Squadra

Types of optic


Symmetrical optic

Symmetrical light distribution to guarantee good levels of horizontal lighting.

MH 70 W RX7s

H B I Em Emin

6.00 8.00 14.00 10 3

MH 70 W RX7s

H B I Em Emin

4.00 4.00 18.00 21 5

MH 150 W RX7s-24

H B I Lm Uo UL TI

6.00 6.00 20.00 1.3 0.4 0.6 3

Sidewalk optic


Asymmetrical optic


Street optic


69

design: Matteo Nunziati, Alessandro Scandola

spotlight Squadra

BodyThe die-cast aluminium body, curved tempered glass, super purity aluminium optics, stainless steel screws and integrated electrical components guarantee the fixture conforms to IP65 protection degree and insulation class II standards. Light source replacement and maintenance procedures are facilitated by the simple design of the fixture, which also ensures it is easier to clean, without having to alter its position.Steel bracket wall-mounting or standard pole-mounting options make the Squadra system a complete solution, suitable for even the most varied applications.

Light sourcesDouble-cap metal halide lamps (RX7s, Fc2); 70, 150 or 250 W. High-pressure sodium lamps with the same electrical characteristics can also be installed in the same body.

EmissionsSymmetrical, asymmetrical, sidewalk and street optics for metal halide and sodium lamps.

Power supplyIntegrated electromagnetic control gear unit with phased circuit or electronic control gear for the fluorescent lamp version.

AccessoriesFixing brackets for wall/ceiling or floor.Cut-off screen.

ColoursSatin-finish grey, anthracite grey or corten finishing.

example of correctinstallation

example of incorrectinstallation

70

70W

MHRX7s

250W

MHFc2

2x42W

TC-TEGX24q-4

150W

MHRX7s-24

70W

SHPRX7s

250W

SHPFc2

150W

SHPRX7s-24

80

116

260

465

42540

68 86 79

Squadra symmetrical emission


MH 35 W G12 7.30 76021.__MH / SHP 70 W RX7s 7.30 76001.__MH / SHP 150 W RX7s-24 8.70 76000.__MH 250 W Fc2 9.50 76002.__SHP 250 W Fc2 9.50 76003.__


FL TC-TE 242 W GX24q-4 6.00 76020.__

accessories

wall, floor or ceiling-mounting attachmentcode 76027.__

cut-off bafflecode 76025.00

IP65 0.041integrated electromagnetic control gear

IP65 0.041integrated electronic control gear

71

70W

MHRX7s

250W

MHFc2

150W

MHRX7s-24

70W

SHPRX7s

250W

SHPFc2

150W

SHPRX7s-24

80

116

260

465

42540

68 86 79

asymmetrical emission Squadra



accessories




72

150W

MHRX7s-24

70W

MHRX7s

250W

MHFc2

150W

SHPRX7s-24

70W

SHPRX7s

250W

SHPFc2

70W

MHRX7s

150W

MHRX7s-24

80

116

260

465

42540

68 86 79

Squadra sidewalk emission, street emission



accessories



IP65 0,041 sidewalk emissionintegrated electromagnetic control gear


MH 70 W RX7s 7.30 76016.__MH 150 W RX7s-24 8.50 76018.__

IP65 0,041 street emissionintegrated electromagnetic control gear

73

Squadra

74

4,500

4,000

5,500

6,000

design: Martini Staff

Squadra arm type 1

The type 1 arms, together with the many poles available and the Squadra fixture, make it suitable for use in urban and public environments. The professional optics and compact nature of the fixture, together with its pleasant appearance, are capable of satisfying all client requests.

double armsingle arm

75

367

317

86 86

626 1092

68 86 79

arm type 1 Squadra

single type 1 armfor pole top 60 code 76028.__

For information on ordering poles, see page 206

double type 1 armfor pole top 60 code 76029.__

76

4,500

3,500

design: Pier Filippo Ferrari

Squadra arm type 2

double armsingle arm

The range types and pole customisation options make it possible to develop a vis-ually simple product. Suitable for a wide range of different installations.

77

22351176

68 86 79

arm type 2 Squadra

Type 2 single armfor pole top 89code 76335.__

Type 2 double armfor pole top 89code 76336.__


78

4,500

3,500

design: Gianluca Sgalippa

Squadra arm type 3

Lighting system can be installed to poles or wall-mounted and is designed for urban or residential areas. There are many different technical solutions available: single arm, double arm and wall-mounting arm.

single arm and double arm. wall-mounting arm

79

658 1030 1800

250

400

400

400

105

105

250

250

68 86 79

arm type 3 Squadra

Type 3 arm wall-mountedcode 76339.__

single type 3 armfor pole top 89code 76337.__

double type 3 armfor pole top 89code 76338.__


80

6,000

5,000

4,000

design: Barin, Facchinetti, Lazzeri, Zorzoli

Squadra/Bilico arm

The result of in-depth research into the relationships defining the city, the Bilico arm showcases the features of logic and attention to detail, combined with just the right amount of expressive vitality.

81

960

1040

68 86 79

arm Squadra/Bilico

Bilico attachment for pole top 60 code 76024.__


82

68 86 79

Squadra

Description Diagram Code

single arm type 1for pole top 60

76028.__

double arm type 1for pole top 60

76029.__


76335.__

double arm type 2for pole top 89 76336.__

arm type 3wall-mounted

76339.__


76337.__

double arm type 3for pole top 89

76338.__

Bilico attachment for pole top 60 76024.__

83

Squadra

84

Demi street fixture


The result of research into aesthetics and technological innovation, Demi has a classic and elegant shape but is also equipped with the very best technical components.It is available with many types of arm and three different optics: street, rotosymmetrical and sidewalk. Demi is the perfect solution to the many requirements of street and urban lighting.

road optic sidewalk optic rotosymmetrical optic

85

Demi

86

Demi

Types of optic

bilateral alternate layout


unilateral street and cycle path/pedestrian layout


MH-T 70 W E27

H B I Em Emin

4.00 4.00 18.50 20 5

SHP-T 250 W E40

H B I Lm Uo UL TI

10.00 10.00 37.00 1.2 0.4 0.7 10

Sidewalk optic


Street optic

The street optic has been designed so as to concentrate most of the light it produces onto the road surface below, meaning that fewer installations are required and thus limiting maintenance and electricity costs.The optic system can be used to achieve high and uniform luminance on the road while limiting glare.Illumination class: ME3a

87


street fixture Demi

BodySheet aluminium cap, die-cast aluminium ring and body, tempered flat glass, aluminium optic, stainless steel screws and components which guarantee the fixture meets IP66 protection degree and insulation class II standards.The optical assembly can be opened from the bottom, using two stainless steel screws.

Light sourcesTubular metal halide lamps from 70 W to 250 W, high-pressure sodium lamps from 70 W to 250 W, and 70 W ellipsoidal

sodium lamp. In the rotosymmetrical version, metal halide lamp with G12 socket, from 35 W to 100 W.

EmissionsAvailable in street, rotosymmetrical and sidewalk versions.

Power supplyElectromagnetic wiring with capacitor and timed ignitor.

ColoursSatin-finish grey, anthracite grey or corten finishing.

road optic sidewalk opticpressure balancing valve

rotosymmetrical optic

88

Demi street fixture

Fixture installation and maintenance

The simplicity of the fixture and its components means installation and lamp replace-ment procedures can be safely performed by a single operator.

Hooking the fixture onto the pole attachment using a fall-prevention system, for subsequent securing by means of stainless steel screws; adjusting the head on the horizontal axis.

Releasing the parabolic optic hinged to the ring; easy lamp replacement.

Opening the optical assembly using two stainless steel screws; cutting off the electricity supply using a mechanical disconnection switch.

89

Demi

90

70W

SHP-EE27

100W

MH-TE40

100W

SHP-TE40

70W

MH-TE27

70W

SHP-TE27

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

520

240

68 86 79

Demi street optic


SHP-E 70 W E27 11.0 75238.__MH-T / SHP-T 70 W E27 11.0 75239.__MH-T / SHP-T 100 W E40 11.5 75240.__MH-T / SHP-T 150 W E40 12.0 75241.__MH-T 250 W E40 12.5 75242.__SHP-T 250 W E40 12.5 75243.__


91

70W

MHG12

520

240

68 86 79

rotosymmetrical optic Demi


MH 35 W G12 11.0 75254.__MH 70 W G12 11.0 75255.__MH 100 W G12 12.0 75256.__


92

70W

SHP-EE27

150W

MH-TE40

100W

MH-TE40

100W

SHP-TE40

70W

MH-TE27

600

90 90

0

Imax=437.59 cd/klm

C0-180 =58

CIE

DIN

CEN

=0.60GI=0.006SPREAD 6.3 StrettoTHROW 56.5 CortoSLI 4.5

KB2

G3D6

70W

SHP-TE27

150W

SHP-TE40

240

520

68 86 79

Demi sidewalk optic


SHP-E 70 W E27 11.0 75248.__MH-T / SHP-T 70 W E27 11.0 75249.__MH-T / SHP-T 100 W E40 11.5 75250.__MH-T / SHP-T 150 W E40 12.0 75251.__


93

Demi

94


Demi arms

Pole-top Arm 360Vertical arm

Attachments for poles with diameter of 60 - 90 - 102 mm


95

240

445

6

0

800

139

5

20 60 545

240

500

160

900

60

635

5

20

240

168

435

60

906

360

5

20

68 86 79

arms Demi

Attachment size [mm] Code Vertical arm

60 75266.__

90 75291.__

102 75296.__

Attachment size [mm] Code Arm 360

60 75263.__

90 75292.__

102 75297.__

Attachment size [mm] Code Pole-top

60 75260.__

96

240

168

480

785

5

20

60 1331

240

168

396

564

480

1520

5

20

60 2068

68 86 79

Demi arms


60 75264.__

90 75293.__

102 75298.__


60 75265.__

90 75294.__

102 75299.__

97

435

906

360

240

5

20

60

458

1331

785

520

60

240

68 86 79

arms Demi

Attachment size [mm] Code Arm 360 double

60 75267.__


60 75268.__

98

480

2068

1520

5

20

60

240

68 86 79

Demi arms


60 75269.__


99

Demi

100

60 mm

design: Martini Staff

Acuto street fixture

BodyDie-cast upper and lower cap, tempered flat glass, aluminium optics, stainless steel screws and other components to ensure IP65 protection rating and insulation class II.The optics section can be opened from the top using a mechanical lock system requiring no tools. Rear mount (0 or 90) suitable for poles having a top diameter of 60 mm.

Light sourcesTubular metal halide lamps (70 W to 250 W), high-pressure sodium lamps (70 W to 250 W), and ellipsoidal sodium lamp (70 W).

EmissionsAvailable in street and sidewalk versions.

Power supplyElectromagnetic power supply with power-factor correction capacitor and timed igni-tor. All versions are fitted with a mechani-cal disconnection switch which cuts the electricity supply off when the upper cap is opened.

ColoursExtra-light grey.

street optics

Pole mount 60 mm

sidewalk optic

101

Acuto

Types of optics

two sides alternate layout


single side

Road surface C2, q0=0.070H= fixture height [m]B = road width [m]I= distance between poles [m]Lm= average maintained luminance [cd/m2]Uo= general uniformity of luminanceUL= longitudinal uniformity of luminanceTI= physiological glare index [%]Em= mean illuminance [lx] Emin= minimum illuminance [lx]

MH-T 70W E27

H B I Em Emin

4.00 4.00 20 19 5

SHP-T 150W E40

H B I Lm Uo UL TI

8.00 8.00 30 1.0 0.6 0.7 7

Sidewalk optics

The sidewalk optics is ideal for pedestrian walkways and cycle paths, and can be combined with the street optics without interfering with road traffic. Allowing in-creased spacing distances, this optical system also provides energy savings.Lighting category S1

Street optics

The street optics has been designed and manufactured to concentrate most of the light flux onto the road surface below, requiring less fixtures and reducing mainte-nance and power requirements.The optical system provides high and uniform levels of luminance on the road, while limiting glare.Lighting category: ME3a

102

a b

Installation and maintenance

The reduced weight and the elongated shape of this fixture make it suitable for safe installation by a single operative. All internal components are safely secured to the lower cap to allow for easy inspection of the electrical parts.

Horizontal adjustment of the head: 90 pole installation (fig. a) and 0 pole installa-tion (fig. b).

The upper caps swings open and is held in position with a side retaining arm to allow easy inspection of all electrical components.

To ensure safe replacement of compo-nents, the power supply is isolated by a mechanical disconnection switch oper-ated by the opening of the cap.

The optics section can be opened from the top using a mechanical spring lock sys-tem requiring no tools.

Acuto street fixture

103

Acuto

104

70W

SHP-EE27

100W

MH-TE40

100W

SHP-TE40

70W

MH-TE27

70W

SHP-TE27

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

835

710

165

320

29019

2

60

60

38

Acuto street optics


SHP-E 70 W E27 8.80 75340.38MH-T / SHP-T 70 W E27 8.80 75341.38MH-T / SHP-T 100 W E40 8.80 75342.38MH-T / SHP-T 150 W E40 8.80 75343.38MH-T 250 W E40 9.80 75344.38SHP-T 250 W E40 9.80 75345.38

IP65 0,10integrated electromagnetic control gearFor information on ordering poles, see page 206

105

Acuto

106

70W

SHP-EE27

150W

MH-TE40

100W

MH-TE40

100W

SHP-TE40

70W

MH-TE27

600

90 90

0

Imax=437.59 cd/klm

C0-180 =58

CIE

DIN

CEN

=0.60GI=0.006SPREAD 6.3 StrettoTHROW 56.5 CortoSLI 4.5

KB2

G3D6

70W

SHP-TE27

150W

SHP-TE40

835

710

165

320

29019

2

60

60

38

Acuto sidewalk optics


SHP-E 70 W E27 8.80 75348.38MH-T / SHP-T 70 W E27 8.80 75349.38MH-T / SHP-T 100 W E40 8.80 75350.38MH-T / SHP-T 150 W E40 8.80 75351.38

IP65 0.10integrated electromagnetic control gearFor information on ordering poles, see page 206

107

Acuto

108

Hono street fixture

design: Mauro Saito

The Hono range, with its distinctive truncated cone shape, consists of two different-sized versions featuring different optics, meaning the fixtures can be used in town centres, along cycle lanes and in traditional street lighting schemes.Hono versions are available with three types of projection, one asymmetrical for large spaces directly in front of the installation, one sidewalk type and one "street" type model with lateral projection. Hono 380 is recommended for pathways, pedestrian walkways and cycle lanes; Hono 460 is recommended for motorised

traffic routes, motorway slip roads, roundabouts and vehicle transit and loading/unloading areas near buildings.The light projection features of the street reflector used in Hono 460 include excellent uniformity, wide spacing and a low level of glare, regardless of whether metal halide lamps or high-pressure sodium lamps are used. The flat transparent glass and the carefully designed optic guarantee excellent performance levels and light distribution in both street and asymmetrical versions.

Hono 380

109

Hono

Hono 460

110

Hono street fixture

Types of optic

MH 70 W RX7s

H B I Em Emin

6.00 8.00 14.00 15 3

MH 70 W RX7s

H B I Em Emin

5.00 4.00 18.50 22 5

MH-T 150 W E40

H B I Lm Uo UL TI

8.00 8.00 28.50 1.3 0.4 0.5 8

Sidewalk optic


Asymmetrical optic


Street optic



111

street fixture Hono

112

4,000

6,000

8,000

10,000

Hono street fixture

the street fixture is available in single and double arm configurations

113

68 86

778

70

1940

870

1270

70

840

970

70

808

70

2540

arms Hono

Hono 380 double arm code 75636.__

Hono 460 single arm code 75637.__

Hono 380 single arm code 75635.__

Hono 460 double arm code 75638.__


114

design: Mauro Saito

Hono 380/460 street fixture

BodyCast aluminium body available in two sizes (380/460) and die-cast aluminium glass support; cast aluminium pole-fixing system. The ring is recessed and locked in place using four captive screws which hold the ring against the gasket; it is also hinged using a concealed system in order to facilitate maintenance procedures. Tempered front safety glass. Anti-oxidant surface treatment and embossed paint finish with high surface resistance. All models are fitted with a disconnection switch in order to guarantee maximum safety during maintenance procedures.




AccessoriesWide range of buried base poles.Pole attachment with 1 and 2 arms.

Colours Embossed-effect grey or anthracite grey.

Hono 460Hono 380



115

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

70W

MHRX7s

150W

MHRX7s-24

70W

SHPRX7s

150W

SHPRX7s-24

650

2

85

3

80

8632

street fixture Hono 380



IP65 0.139 m2


asymmetrical optic



IP65 0.139 m2


sidewalk optic

116

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

250W

MH-TE40

150W

SHP-TE40

250W

SHP-TE40

100W

MH-TE40

100W

SHP-TE40

150W

MH-TE40

150W

SHP-TE40

250W

MH-TE40

250W

SHP-TE40

920

3

65

4

60

8632

Hono 460 street fixture



IP65 0.245 m2


road optic



IP65 0.245 m2


asymmetrical optic

117

Hono

118

spotlight 400 146

Twin 1-2-3148

spike 123

spotlight 260 133

spotlight 122

bollard 180132

spotlight 180 124

spotlight 350 142

Lux 98

Lux 180/260

Lux 350/400 / Twin 1-2-3

119

Spotlights

spotlight 154

spotlight 160

spotlight 164

spotlight 166

Moove IP65

Bicubo

Slim

Martino

120

design: Luca Trazzi

Lux 98 spotlight

BodyDie-cast aluminium body and ring, sheet steel support bracket. The control gear compartment is created using an aluminium extrusion closed off at the ends with two die-cast aluminium caps. All fixtures are fitted with hinges which allow rotation on the horizontal axis and the vertical axis.The positioning of four screws on the outside of the ring ensures excellent gasket compression which, in turn, guarantees a watertight seal. Anti-oxidant treatment and painted finish.

Light sourcesQT-12 halogen lamp with GY6.35 socket.CDm-Tm metal halide lamp with PGJ5 socket.QT-14 lamp at mains voltage with G9 socket.

EmissionsTwo different optics offer spot and flood emission, with halogen and metal halide lamps.

Power supplyIntegrated electronic transformer, or direct from the electricity mains.

AccessoriesFixing bracket, rods and spike.

Colours Embossed-effect grey or anthracite grey.

horizontal aim positioning (360)

vertical aim positioning (240)


121

spotlight Lux 98

Types of optic

Spot optic

Suitable for the illumination of small architectural details: spires, vaults and capitals.

Flood optic

Suitable for the uniform illumination of small surfaces: monuments, fountains and ornamental gardens.

QT-14 48 W G9

L Emed

3.00 0.64 370

QT-14 48 W G9

L Emed

3.00 2.24 52

MH Mini Master Color 20 W PGJ5

L Emed

3.00 0.63 808

MH Mini Master Color 20 W PGJ5

L Emed

3.00 2.24 113

L = distance of the spotlight from the wall [m] = diameter of the illuminated surface [m]Emed = average illuminance [lux]

122

48W

QT-14G9

48W

QT-14G9

35W

QT-12GY6,35

20W

MHPGJ5

35W

QT-12GY6,35

20W

MHPGJ5

9

8

129

104

9

8

104

275

65x65

8632

Lux 98 spotlight

Light source Wattage Socket Optic W [kg] Code

AL QT-14 48 W G9 S 1.00 75655.__AL QT-14 48 W G9 F 1.00 75656.__

IP65

rods (L=660mm) for wall installation for code 75655 and 75656code 75771.__

plate for wall and ground installation code 75778.__

accessories


AL QT-12 35 W GY6.35 S 4.00 75651.__AL QT-12 35 W GY6.35 F 4.00 75652.__MH Mini Master Colour 20 W PGJ5 S 4.00 75653.__MH Mini Master Colour 20 W PGJ5 F 4.00 75654.__

IP65integrated electronic control gearside cable outlet

bracket for wall installation for code 75651, 75652, 75653 and 75654code 75772.68 code 75772.86

123

48W

QT-14G9

48W

QT-14G9

35W

QT-12GY6,35

20W

MHPGJ5

35W

QT-12GY6,35

20W

MHPGJ5

9

8

104

345

250

80X80

9

8

220

250

104

75

8632

spotlight, spike Lux 98


AL QT-12 35 W GY6.35 S 5.00 75672.__AL QT-12 35 W GY6.35 F 5.00 75674.__MH Mini Master Colour 20 W PGJ5 S 5.00 75676.__MH Mini Master Colour 20 W PGJ5 F 5.00 75678.__

IP65integrated electronic control gearbottom cable outletremoving the spike, wall and floor installation are possible.


AL QT-14 48 W G9 S 2.00 75688.__AL QT-14 48 W G9 F 2.00 75690.__

IP65fixture with power supply cable L= 3 mbottom cable outletremoving the spike, wall and floor installation are possible.

124

design: Luca Trazzi

Lux 180/260 spotlight

easy access to the lamp compart-ment

BodyDie-cast aluminium body and ring, sheet steel support bracket. The control gear compartment is created using an aluminium extrusion closed off at the ends with two die-cast aluminium caps. All fixtures are fitted with hinges which allow rotation on the horizontal axis and the vertical axis.The positioning of four screws on the outside of the ring ensures excellent gasket compression which, in turn, guarantees a watertight seal. Furthermore, one of the screws has a hinge for easy access to the lamp compartment. Anti-oxidant treatment and painted finish.

Light sourcesHalogen lamps with GY6.35 and G53 socket.

Metal halide lamp with PGJ5, G12 and GX8.5 socket.TC-TE fluorescent lamp with GX24q-2 socket.

EmissionsTwo different optics offer spot and flood emission, with halogen and metal halide lamps.

Power supplyIntegrated electronic transformer, or direct from the electricity mains.

AccessoriesFixing bracket, rods and spike.


horizontal aim positioning (360)

vertical aim positioning (240)

Lux 180

Lux 260


125

spotlight Lux 180

Super spot optic

Suitable for the illumination of architectural details: spires, vaults and capitals.

Types of optic for Lux 180

QT-12 50 W GY6.35

L Emed

3.00 0.26 1200

QT-12 50 W GY6.35

L Emed

3.00 0.94 211

QT-12 50 W GY6.35

L Emed

3.00 2.20 78

MH 35 W G12

L Emed

3.00 0.38 4232

MH 35 W G12

L Emed

3.00 0.94 872

MH 35 W G12

L Emed

3.00 2.04 277


Flood optic

Suitable for the uniform illumination of surfaces: facades, large green spaces and large architectural constructions.

Spot optic

Suitable for the illumination of large architectural details: monuments, fountains and gardens.

126

Lux 260 spotlight

MH 70 W G12

L Emed

3.00 0.30 18948

MH 70 W G12

L Emed

3.00 0.88 1889

MH 70 W G12

L Emed

3.00 2.12 350


Types of optic for Lux 260

Super spot optic

Suitable for the illumination of architectural details: spires, statues and capitals.

Spot optic

Suitable f

MARTINI OUTDOOR ENG

Documents

Transcript of MARTINI OUTDOOR ENG