Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The...
-
Upload
gregory-hinchman -
Category
Documents
-
view
216 -
download
1
Transcript of Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The...
![Page 1: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/1.jpg)
![Page 2: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/2.jpg)
Manufacturing Processes for a 4 Layer Multi-layer PCB
Section through PCB
Via hole
SMD Pad
The following presentationcovers the main processesduring the production ofa 4 layer or a multi-layer PCB.
The diagrams which followrepresent a section througha PCB, as indicatedin red.
Tracks under solder mask
+44 (0)1992 510000
![Page 3: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/3.jpg)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)Layer 3 (Inner)
COPPER FOIL
COPPER FOIL
PRE-PREG
PRE-PREG
INNER LAYER (CORE)
Copper Laminate
Typical Layer Construction - 4 Layer PCB
1. Multilayer PCB’s have inner tracking layers which are individually processed layer pairs which require bonding and connecting to form the finished PCB.
4 Layer PCB’s
+44 (0)1992 510000
![Page 4: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/4.jpg)
Inner Layer Processing
Layer 2 (Inner)
Layer 3 (Inner)
Core
Copper Laminate (Dielectric)
• For Multilayer PCB’s Inner layer Core materials are usually processed as “Layer pairs”
• Core materials can be typically 0.2mm thick which come pre coated with a ½ oz copper foil.
+44 (0)1992 510000
![Page 5: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/5.jpg)
Layer 2 (Inner)
Layer 3 (Inner)
Core
Laminating and Imaging of Internal Layers
UV sensitive film is laminated over top and bottomsurfaces of the CoreAreas of the Core where no copper is required are left exposed
Inner Layer Imaging
• The addition of the inner layer track patterns to layers 2 and 3.
+44 (0)1992 510000
![Page 6: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/6.jpg)
Core
• The etch process produces an ‘etch back’ or undercut of the tracks. This can be specified by the W / W1 parameters
• This means that tracks will end up approximately0,025 mm (0.001”) thinner than the original design.
Inner Layer Etching
Etch Process - Remove Exposed Copper
Copper Removed
Layer 2 (Inner)
Layer 3 (Inner)
+44 (0)1992 510000
![Page 7: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/7.jpg)
Core
Remove Laminating Film
Layer 2 (Inner)
Layer 3 (Inner)
Film Strip
• The laminated film is removed prior to AOI inspection.
+44 (0)1992 510000
![Page 8: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/8.jpg)
Core
Completed Inner Layer Core
Layer 2 (Inner)
Layer 3 (Inner)
All inner layer Core materials are processed as “Layer Pairs” prior to Bonding
At this stage the Cores are inspected visually (AOI) and defective Cores rejected
Sometimes a surface treatment is applied to the Cores to aid with the Bonding process
AOI Inspection
• Automatic Optical Inspection (AOI).
• Inner layers are scanned and compared to Gerber data for errors.
+44 (0)1992 510000
![Page 9: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/9.jpg)
Layer stackup
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
Layer Stackup
• The order in which the layers are to be bonded together.
• The outer layer copper foils, layers 1 and 4 are purchased in sheet form. For a 1 oz finished copper weight typically a ½ oz foil would be used during bonding process to form the outer layers.
+44 (0)1992 510000
![Page 10: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/10.jpg)
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
Layer stackup
FOIL
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
+44 (0)1992 510000
![Page 11: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/11.jpg)
Layer stackup
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
FOIL
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
+44 (0)1992 510000
![Page 12: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/12.jpg)
Layer stackup
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
FOIL
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
+44 (0)1992 510000
![Page 13: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/13.jpg)
Layer stackup
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
FOIL
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
+44 (0)1992 510000
![Page 14: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/14.jpg)
Layer stackup
FOIL
PRE-PREG
PRE-PREG
FOIL
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
+44 (0)1992 510000
![Page 15: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/15.jpg)
Layer stackup
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
PRE-PREG
PRE-PREG
FOIL
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
+44 (0)1992 510000
![Page 16: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/16.jpg)
Layer stackup
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
FOIL
PRE-PREG
PRE-PREG
FOIL
+44 (0)1992 510000
![Page 17: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/17.jpg)
Bonding – Heat
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
Layer 1 (Outer)
Layer 4 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
FOIL
FOIL
PRE-PREG
PRE-PREG
INNER LAYER
FOIL
PRE-PREG
PRE-PREG
FOIL
Bonding
• Once the layers are built up heat is applied over a period of time, this is to allow the Pre-Preg material time to melt and flow evenly between the layers, this is in effect the material that sticks the layers together.
+44 (0)1992 510000
![Page 18: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/18.jpg)
Bonding – Multilayer Press
Layer 1 (Outer)
Layer 2 (Inner)
Layer 3 (Inner)
Layer 4 (Outer)
FOIL
PRE-PREG
PRE-PREG
FOIL
Bonding
• Layers are pressed together over a set period of time typically a bonding cycle will last for approx. 4 hours.
• Bonding capacity would depend on the number of openings and size of press.
+44 (0)1992 510000
![Page 19: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/19.jpg)
Drilling of a Panel
Layer 1
Layer 4
Copper Laminate Drilled Hole
Drilling
• The holes are drilled for both thru-hole components and via connections. Once plated this will form the connection from 1 side of the PCB to the other, at the same time connecting the inner layers where required.
+44 (0)1992 510000
![Page 20: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/20.jpg)
Electroless Copper ProcessAddition of Copper to all Exposed Surfaces
Layer 1
Layer 2
Layer 3
Layer 4
Copper Drilled Hole
Plating
• Plating is the same process for 2 or 4 Layer.
• The aim is plate down the barrel of the hole to make the connection from 1 side of the PCB to the other.
+44 (0)1992 510000
![Page 21: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/21.jpg)
Layer 1
Layer 2
Layer 3
Layer 4
Laminating and Imaging of External Layers
UV sensitive film is laminated over top and bottomsurfaces of PCBIt is then exposed and developed, leaving an exposed image of the PCB pattern
Copper
• The outer layer track patterns are photo-imaged onto the panels using UV sensitive film.
Imaging
+44 (0)1992 510000
![Page 22: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/22.jpg)
Layer 1
Layer 2
Layer 3
Layer 4
Electro-plating Process 1Additional Copper to all Exposed Surfaces
Laminated Film Plate Additional Copper
• Electro-plating increases the copper thickness on the outer layers and through the barrel of the hole. The copper foils for a 4 layer or the starting copper weight on 2 layer boards is most commonly ½ oz the plating then increases the finished copper weight to the desired 1oz each side.
Plating
+44 (0)1992 510000
![Page 23: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/23.jpg)
Layer 1
Layer 2
Layer 3
Layer 4
Electro-plating Process 2Add Tin over Exposed Copper Areas
Laminated Film Additional CopperTin Plating
Tin Plating
• A tin plate is added to all exposed copper areas, this act as a mask during the etching process.
+44 (0)1992 510000
![Page 24: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/24.jpg)
Layer 1
Layer 4
Electro-plating Process 3Remove Laminated Film
Laminated Film Removed Tin Plating
Layer 2
Layer 3
Film Strip
• The laminated film is removed to expose copper areas ready for the etching process.
+44 (0)1992 510000
![Page 25: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/25.jpg)
Etch Process - Remove Exposed Copper
Copper Removed Tin Plating
• The etching process removes unwanted areas of copper.
• The etch process produces an ‘etch back’ or undercut of the tracks.
• This means that tracks will end up approximately0,025 mm (0.001”) thinner than the original design.
Etching Process
Layer 1
Layer 4
Layer 2
Layer 3
+44 (0)1992 510000
![Page 26: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/26.jpg)
Layer 1
Layer 2
Layer 3
Layer 4
Tin Strip - Remove Tin Plating
Tin Plating Removed
• The Removal of Tin will very slightly reduce the copper thickness (T) on the outer layers
Tin Strip
+44 (0)1992 510000
![Page 27: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/27.jpg)
PCB is now complete except forsurface finishes and panel routing/punching
Layer 4
Layer 1
Via Hole SMD PadTracks
Tracks
+44 (0)1992 510000
![Page 28: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/28.jpg)
Solder Mask ApplicationImage, Develop and Cure
Layer 4
Layer 1
UV Image, Develop and Cure
• The image is semi cured and then UV image exposed.
• Any areas that are not exposed to the UV light are then dissolved in the developer, exposing the areas where the final surface finish is required.
Solder Mask
+44 (0)1992 510000
![Page 29: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/29.jpg)
Surface Finish Process
Layer 4
Layer 1
Apply Solder to Exposed Copper Areas
• Surface Finish (Tin / Lead, Gold, Silver, OSP, Tin) is usually only added to pads. The solder mask prevents coating of any other areas.
Surface Finish
+44 (0)1992 510000
![Page 30: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/30.jpg)
Component Ident
R34
IC3
R34
IC3
SCL2 9624
Ident / Silk Screen
• An optional component Ident or Silk Screen is printed onto the PCB.
+44 (0)1992 510000
![Page 31: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/31.jpg)
Routing or Punching
Routing or Punching
• The circuit profile is then punched or routed.
+44 (0)1992 510000
![Page 32: Manufacturing Processes for a 4 Layer Multi-layer PCB Section through PCB Via hole SMD Pad The following presentation covers the main processes during.](https://reader035.fdocuments.in/reader035/viewer/2022062511/551814d0550346a7318b45ce/html5/thumbnails/32.jpg)
Testing and Inspection
All PCB’s are 100% Electrically tested
All PCB’s are 100% Visually Inspected
+44 (0)1992 510000