Manual de Partes Trido 80

7/17/2019 Manual de Partes Trido 80

http://slidepdf.com/reader/full/manual-de-partes-trido-80 1/31

Spare parts list for

Flush pump

Ersatzteilliste für

Spülpumpe

TRIDO ® 80

Printed Matter No. 6991 0593 50i



2



Spare parts list for

Flush pump

Ersatzteilliste für

Spülpumpe

TRIDO ® 80

Printed Matter No. 6991 0593 50i

ATLAS COPCO CRAELIUS ABSTOCKHOLM, SWEDEN 2005-09



To be read before ordering

1. When ordering spare parts, please state Descriptionand part number of the spare part (not the Ref. no.)as well as type designation and serial number.

2. Parts which are included in a subassembly are givenimmediately after this part and are preceded by adash in the description column.

Symbols that may occur:

*) Placed instead of part number in part number column, means that the indicated part is normally notDelivered separately. Can be ordered as a kit, seepoint 2.

**) Optional

A) When ordering, please state part number, hosedimension and length.

B) Se separate list according to the List of contents.

The number stated in the figure indicate the pages in the spare parts list on which the different parts will be found.Bildens positionsnummer indikerar på vilken sida som detaljen är placerad.

4

TRIDO ® 80 Flush pump

Läs detta innan du beställer reservdelar:

1. Ange artikelns namn och detaljnummer (inte baraRef. nr.) och även maskinens typ- och serienummer vid beställning av reservdelar.

2. Delar som ingår i huvudartikeln nämns efter dennaoch föregås av ett streck i “Beskrivningskolumnen”.

Teckenförklaring:

*) Ersätter detaljnummer, vilket innebär att detaljen van-ligtvis inte levereras separat utan ingår i en sats, sepunkt 2.

**) Extra utrustning

A) Ange detaljnummer, slangdimension och längd.

B) Se innehållsförteckningen.

TRIDO ® 80E

TRIDO ® 80A

TRIDO ® 80DG

TRIDO ® 80EG

TRIDO ® 80H2S

TRIDO ® 80 WP



5

Innehåll Sida

TRIDO®80E .............................................................10

Spolpump................................................................20

TRIDO®80A .............................................................12

Spolpump................................................................20TRIDO®80DG ..........................................................14

Spolpump................................................................20

TRIDO®80EG ..........................................................16

Spolpump................................................................20

TRIDO®80H2S.........................................................18

Spolpump................................................................20

Säkerhetsventil .......................................................22

Startenhet ...............................................................22

Extra utrustning.......................................................24Sugslang kompl. ...........................................24Tryckslang kompl..........................................24 Ackumulatorsats ...........................................24Flödesmätarsats ...........................................24Flödeskontroll enhet .....................................24

Konstantflödesventil................................................26

TRIDO 80H Extra H2S-kit.......................................27

TRIDO®80 WP.........................................................29

Contents page

TRIDO® 80E ............................................................10

Flush pump .............................................................20

TRIDO® 80A ............................................................12

Flush pump .............................................................20TRIDO® 80DG .........................................................14

Flush pump .............................................................20

TRIDO®80EG ..........................................................16

Flush pump .............................................................20

TRIDO®80H2S.........................................................18

Flush pump .............................................................20

Safety valve ............................................................22

Starting unit.............................................................22

Optional equipment.................................................24Suction hose compl. .....................................24Pressure hose compl....................................24 Accumulator kit compl. .................................24Flow measure kit compl................................24Flow control unit ...........................................24

Flow control valve ...................................................26

TRIDO 80H option H2S-kit ....................................27

TRIDO®80WP..........................................................29



Vor der Ersatzteilbestellung lesen:

1. Bei der Ersatzteilbestellung bitte die Teilbenennungund die Ersatzteilnummer (10-stellig), Ausfuhrungstyp und Serienummer der Maschineangeben.

2. Teile, die einer Montagegruppe angehören sindunmittelbar danach aufgegliedert und durch einen

Strich in der Spalte “Bezeichnung” gekennzeichnet.

Verwendete Symbole:

*) Ein Sternchen anstelle einer Teilenummer bedeutet,daß das so gekennzeichnete Teil normalerweisegesondert geliefert wird. Kann auch im Set bestelltwerden, siehe Punkt 2.

**) Auf Sonderwunsch lieferbar.

A) Bei Bestellung bitte Teilnummer und Schlauchgröße,-länge, -durchmesser usw. angeben!.

B) Siehe separate Liste!.

Die Ziffern in dieser Abbildung entsprechen den Seiten der Ersatzteilliste, auf denen die gekennzeichneten Teile zu findensind.I numeri indicati nelle figure si riferiscono alle pagine di questo listino parti di ricambio in cui si possono trovare i singolicomponenti

6

Leggere prima di ordinare:

1. Quando ordinate un ricambio, perfavore indicate”Description”, ”Part number” ma non il ”Ref.no” e,possibilmente, modello e numero di serie dellamacchina.

2. I ricambi che sono inclusi in un sottoinsieme sonoelencati immediatamente dopo questa parte sono

preceduti da un trattino nella colonna ”Description”.

Simboli utilizzati:

*) Collocato, in sostituzione del ”part number”nell´apposita colonna, indica che quel ricambionormalmente non è consegnabile separatamente.Può essere ordinato solo in un kit, vedi punto 2.

**) Accessorie.

A) Trattandosi di flessibili idraulici, preghiamo specifica-re, oltre al ”part number”, anche dimensioni e lung-hezza!

B) Consultare la lista specifica facendo riferimento

all´indice!

TRIDO ® 80 Flush pumpTRIDO ® 80E

TRIDO ® 80A

TRIDO ® 80DG

TRIDO ® 80EG

TRIDO ® 80H2S

TRIDO ® 80 WP



Inhalt Seite

TRIDO® 80E ............................................................10

Spülpumpe..............................................................20

TRIDO® 80A ............................................................12

Spülpumpe..............................................................20TRIDO® 80DG .........................................................14

Spülpumpe..............................................................20

TRIDO®80EG ..........................................................16

Spülpumpe..............................................................20

TRIDO®80H2S.........................................................18

Spülpumpe..............................................................20

Sicherheitsventil......................................................22

Motor ausschalter ...................................................22

Sonderausrüstung...................................................24Saugschlauch kompl.....................................24Druckschlauch kompl....................................24 Akkumulatorsatz kompl.................................24Flussmessersatz kompl. ...............................24Flusskontrollesatz kompl. .............................24

Flusskontrolleventil .................................................26

TRIDO®80H sonderausrüstung H2S-satz ...............27

TRIDO®80 WP.........................................................29

7

Indice Pagina

TRIDO® 80E ............................................................10

Corpo pompa ..........................................................20

TRIDO® 80A ............................................................12

Corpo pompa ..........................................................20TRIDO® 80DG .........................................................14

Corpo pompa ..........................................................20

TRIDO®80EG ..........................................................16

Corpo pompa ..........................................................20

TRIDO®80H2S.........................................................18

Corpo pompa ..........................................................20

Valvola di sicurezza ................................................22

Avviamento .............................................................22

Attrezzature opzionali .............................................24Flessibili di aspirazione.................................24Flessibili di mandata .....................................24 Accumulatore ................................................24Flussometro ..................................................24Regolatore di portata unità completa ...........24

Valvola regolatrice di portata ..................................26

TRIDO 80H opzionali H2S......................................27

TRIDO®80 WP.........................................................29



Information pour la commande

1. Prière de spécifier la description et le numéro de lapièce (et non sa référence) ainsi que la d´esignationde type et le numéro de série de la machine ou del’unité.

2. Les pièces faisant partie d’un sous-ensemble partielsont indiquées immédiatement après celui-ci et sont

précédées d’un tiret dans la colonne de ladescription.

Symboles utilisés:

*) Placé au lieu du numéro de pièce, dans la colonnedu numéro de pièce, pour indiquer que la pièce n’estnormalement pas livrée séparément. Voir point 2pour savoir si la pièce est également livrée en kit.

**) Option.

A) Lors de la commande, prière de spécifier le numérode pièce ainsi que la longueur et les dimensions duflexible.

S) Voir la liste séparée selon Sommaire.

Considerar antes de hacer un pedido

1. Al solicitar piezas de repuesto, sirvase indicar ladesignación y el numero de la pieza (No su númerode referencia) asi como el tipo de maguina y númerode serie.

2. Las piezas que formant parte de un subconjuntovienen relacionadas immediatamente despues del

subconjunto y vienen precedidas de un guíon.

Indicacion de los simbolos:

*) Colocados en lugar número de la pieza significa quela pieza indicada no se suministra separadamente.Se puede pedir como parte de juego. Ver punto 2arriba.

**) Opcional

A) Cuando efectue el pedido, indicar la designación dela pieza y el diametro de la manguera, longitud, etc.

S) Ver en lista a parte de acuerdo con la relacion decontenido.

Les nombres indiqués dans la figure donnent les numéros des pages de la liste des pièces de rechange qui contiennentles pièces concernées .El número indicada en la se figura a la pagina de la lista repuestos en la cual se pueden encontrar los números de partes.

8

TRIDO ® 80 Flush pumpTRIDO ® 80E

TRIDO ® 80A

TRIDO ® 80DG

TRIDO ® 80EG

TRIDO ® 80H2S

TRIDO ® 80 WP



Sommaire Page

TRIDO®80E .............................................................10

Pompe dínjection ...................................................20

TRIDO®80A .............................................................12

Pompe dínjection ...................................................20TRIDO®80DG ..........................................................14


TRIDO®80EG ..........................................................16


TRIDO®80H2S.........................................................18


Soupape de sûrete´ ................................................22

Unite´de démarrage................................................22

Equipment en option...............................................24Flexible dáspiration compl...........................24Flexible de pression compl...........................24Kit dáccumulateur compl.............................24Kit de débitmëtre compl................................24Contrôleur de débit compl. ...........................24

Régulateur de débit ................................................26

TRIDO 80H en option H2S.....................................27

TRIDO®80 WP.........................................................29

Contenido Pagina

TRIDO®80E .............................................................10

Bomba de barrido ...................................................20

TRIDO®80A .............................................................12

Bomba de barrido ...................................................20TRIDO®80DG ..........................................................14

Bomba de barrido ...................................................20

TRIDO®80EG ..........................................................16

Bomba de barrido ...................................................20

TRIDO®80H2S.........................................................18

Bomba de barrido ...................................................20

Válvula de seguridad ..............................................22

Arrancador ..............................................................22

Equipo opcional ......................................................24Manguera de succiòn (completa) .................24Manguera de pressiòn..................................24 Acumulador (juego completo).......................24Medidor de flujo (juego completo) ................24Unidad de control de flujo.............................24

Vàlvula de control de flujo ......................................26

TRIDO 80H opcional H-2S .....................................27

TRIDO®80 WP.........................................................29

9



TRIDO ® 80E

8492 0209-23

10

38

37

36

11

3

1

27

32

4628

42

39

34

29 306 23 7 10 24 46 8

9

15

20

21 22 45 5 41 42 43 44 35 25

13

2

12

49

14



11

TRIDO ® 80E

8492 0209-23

Ref. No. Part No. Qty. Description Bezeichnung Notes

1 8492 0208-08 1 Flush pump ( S ).................................. Spülpumpe ( S )..................................2 3715 7568-00 1 Nipple .................................................. Nippel.................................................. R 1” - NPTF 1”3 3715 7643-80 1 Safety valve,.( S )................................ Sicherheitsventil ( S )..........................5 3715 7298-00 1 Key ...................................................... Keil ......................................................6 3715 7311-00 1 Frame.................................................. Rahmen ..............................................

7 0144 3368-03 3 Screw................................................... Schraube............................................. U6S UNC 1/2”x578 3715 7310-00 2 Motor bracket ...................................... Motorkonsole ......................................9 0560 1309-00 1 Elbow................................................... Winkelstück......................................... R 1 1/2” x KR 1 1/2”

10 0301 2358-00 3 Washer................................................ Scheibe ............................................... BRS 13 x 24 x 211 3715 7971-00 1 Gauge.................................................. Manometer.......................................... 0 - 100 bar

12 3715 7341-00 1 Nut....................................................... Mutter..................................................13 0661 1049-00 2 Seal ring .............................................. Dichtscheibe ....................................... Tredo 2314 3715 7550-00 1 Nipple .................................................. Nippel.................................................. R 1” x R 1”15 3715 7580-00 1 Nipple .................................................. Nippel.................................................. R 1 1/2” x R 2”20 3715 7313-00 1 Belt guard............................................ Riemenschutz .....................................

21 0147 1326-03 6 Screw................................................... Schraube............................................. M6S 8 x 30 FZB22 0291 1110-00 6 Lock nut............................................... Gegenmutter....................................... M8 FZB23 3715 7314-00 1 Pulley................................................... Riemenscheibe ................................... Dia.400 x 3 SPZ24 3715 7316-00 3 V-belt................................................... Keilriemen ........................................... SPZ 190025 3716 2102-00 1 Pulley................................................... Riemenscheibe ................................... Dia.190 x 3 SPZ

27 3715 7324-00 1 El.motor............................................... El.motor............................................... 7,5 kW,1500 rpm28 0147 1403-03 4 Screw................................................... Schraube............................................. M6S 12 x 40 FZB29 0291 1112-00 4 Lock nut............................................... Gegenmutter....................................... M 1230 0301 2358-00 8 Washer................................................ Scheibe............................................... BRB 13 x 2432 3715 8597-80 1 Starter ( S ).......................................... Motor ausschalter ( S ) .......................

34 0147 1362-03 2 Screw................................................... Schraube............................................. M6S 10 x 2535 3715 7295-00 1 Key ...................................................... Keil ......................................................36 0653 0905-05 1 Seal washer......................................... Dichtscheibe ....................................... 5,2 x 9,5 x1,537 3715 8542-00 1 Adapter ................................................ Adapter ...............................................38 3176 8270-00 1 Nipple .................................................. Nippel.................................................. UN 3/4 - 16 - R 3/8

39 0300 8006-00 4 Washer................................................ Scheibe............................................... SRKB 11 x 2841 0147 1379-03 1 Screw................................................... Schraube............................................. M6S 10 x 110 FZB42 0291 1111-00 3 Lock nut............................................... Gegenmutter....................................... M 1043 0301 2344-00 2 Washer................................................ Scheibe............................................... BRB 10,5 x 2244 3715 7841-00 1 Spacer tube ......................................... Distanzhülse .......................................

45 0306 3103-00 4 Washer................................................ Scheibe ............................................... UB 1146 0147 1401-03 4 Screw................................................... Schraube............................................. M6S 12 x 30 FZB47 3715 8631-00 2 Screw................................................... Schraube.............................................48 0266 2112-00 2 Nut....................................................... Mutter.................................................. M6M 12 FZB49 0663 9186-00 1 O-ring................................................... O-ring.................................................. 29,75 x 3,53

Optional equipment.( S ) ..........................................Sonderausstattung ( S )

3715 7317-90 1 Suction hose ( S )................................ Saugschlauch ( S ) ............................. 2” x 6m.

3715 7327-90 1 Pressure hose ( S ) ............................. Druckschlauch( S ) ............................. 1” x 10m.3715 7362-90 1 Spare parts kit ..................................... Reservestücksatz................................3715 7898-oo 1 Pulley Ø 90.......................................... Riemenscheibe Ø 90 .......................... For / vor 40 l/min.3715 7328-00 1 Pulley Ø 140........................................ Riemenscheibe Ø 140 ........................ For /vor motor 60 Hz

3050 0056-90 1 Flow control unit. ( S ) ......................... Flusskontrollesatz ( S ) .......................3715 8559-90 1 Flow measure kit ( S ) ......................... Flussmessersatz ( S ) .........................3715 8557-90 1 Accumulator kit ( S )............................ Akkumulatorsatz ( S ) .........................3716 1343-00 3 V-belt ................................................... Keilriemen ........................................... SPZ 1800



12

TRIDO ® 80A

8492 0209 15

58

59

60

11

31

40

50

51

553328275539107386

9

15

56 57

41 42 47 5 43 44 4645 55 25 26 31 29 30 61

52

54

53

32

48

49

34

35

36

3713

2

12

62

14



13

TRIDO ® 80A

8492 0209 15


1 8492 0208-08 Flush pump ( S ) .................................. Spülpumpe ( S ) ................................2 3715 7568-00 1 Nipple.....................................................Nippel ................................................R 1” - NPTF 1”3 3715 7643-80 1 Safety valve,.( S )...................................Sicherheitsventil ( S )........................5 3715 7298-00 1 Key.........................................................Keil ....................................................6 3715 7311-00 1 Frame.....................................................Rahmen.............................................

7 0144 3368-03 3 Screw................................................... Schraube............................................. U6S UNC 1/2”x578 3715 7310-00 2 Motor bracket ...................................... Motorkonsole ......................................9 0560 1309-00 1 Elbow................................................... Winkelstück......................................... R 1 1/2” x KR 1 1/2”

10 0301 2358-00 3 Washer................................................ Scheibe ............................................... BRS 13 x 24 x 211 3715 7971-00 1 Gauge.................................................. Manometer.......................................... 0 - 100 bar

12 3715 7341-00 1 Nut....................................................... Mutter..................................................13 0661 1049-00 2 Seal ring .............................................. Dichtscheibe ....................................... Tredo 2314 3715 7550-00 1 Nipple .................................................. Nippel.................................................. R 1” x R 1”15 3715 7580-00 1 Nipple .................................................. Nippel.................................................. R 1 1/2” x R 2”25 3715 7328-00 1 Pulley................................................... Riemenscheibe ................................... Dia.140 x 3 SPZ

26 0337 7169-00 1 Key ...................................................... Keil......................................................27 3050 0040-00 1 Air motor.............................................. Luftmotor............................................. MZH 4228 3715 7319-00 1 Motor bracket ...................................... Motorkonsole ......................................29 0147 1403-03 4 Screw................................................... Schraube............................................. M6S 12 x 4030 0291 1112-00 4 Lock nut............................................... Gegenmutter....................................... M12 LM6M

31 9090 0515-00 1 Silencer................................................ Geräuschdämpfer ............................... R 1”32 9090 1852-90 1 Bracket ................................................ Konsole ...............................................33 3715 7529-00 1 Bracket ................................................ Konsole ...............................................34 8202 5205-50 1 Air lubricator ........................................ Nebelschmierapparat.......................... MAXIDIM 25A35 9090 1849-90 1 Mounting kit......................................... Montierungssatz..................................

36 8202 0105-60 1 Air filter ................................................ Luftfilter ............................................... MAXIFIL 25A-B37 9000 0303-00 3 Claw coupling...................................... Klauenkopplung .................................. R 1”38 3715 7314-00 1 Pulley................................................... Riemenscheibe ................................... Dia.400 x 3 SPZ39 3715 7316-00 3 V-belt................................................... Keilriemen ........................................... SPZ 1900

40 3715 7313-00 1 Belt guard............................................ Riemenschutz .....................................41 0147 1326-03 4 Screw................................................... Schraube............................................. M6S 8 x 30 FZB42 0291 1110-00 4 Lock nut............................................... Gegenmutter....................................... M8 LM6M43 0147 1379-03 1 Screw................................................... Schraube............................................. M6S 10 x 110 FZB44 0291 1111-00 1 Lock nut............................................... Gegenmutter....................................... M10 LM6M45 0301 2344-00 2 Washer ............................................... Scheibe............................................... BRB 10,5 x 22

46 3715 7841-00 1 Spacer tube ......................................... Distanzhülse .......................................47 0306 3103-00 4 Washer................................................ Scheibe ............................................... UB 1148 0160 6108-00 3 Screw................................................... Schraube............................................. M6S 8 x 20 FZB49 0291 1110-00 3 Lock nut............................................... Gegenmutter....................................... M8 LM6M§§50 0147 1362-02 2 Screw................................................... Schraube............................................. M6S 10 x 25

51 0266 2111-00 2 Nut....................................................... Mutter.................................................. M6M 10 FZB52 9030 0500-00 1 Hose .................................................... Schlauch ............................................ 60053 9000 0312 00 2 Claw coupling...................................... Klauenkopplung .................................. R 3/4”

54 0347 6108-00 2 Hose clamp ......................................... Schlauch klemme................................ 26 - 3555 0147 1399-03 4 Screw................................................... Schraube............................................. M6S 12 x 22

56 3715 8631-00 2 Screw................................................... Schraub...............................................57 0266 2112-00 2 Nut....................................................... Mutter.................................................. M6M 12 FZB58 0653 0905-05 1 Seal washer......................................... Dichtscheibe ....................................... 5,2 x 5,5 x 1,559 3715 8542-00 1 Adapter ................................................ Adapter ............................................... R 1/4 - UN 3/4 - 1660 3176 8270-00 1 Nipple .................................................. Nippel.................................................. UN 3/4 - 16 - R 3/8

61 3715 8613-00 4 Washer................................................ Scheibe ...............................................62 0663 9186-00 1 O-ring................................................... O-ring.................................................. 29,75 x 3,53

Optional equipment.( S ) ..........................................Sonderausstattung ( S )

3715 7317-90 1 Suction hose ( S )................................ Saugschlauch ( S ) ............................. 2” x 6m.3715 7327-90 1 Pressure hose ( S ) ............................. Druckschlauch ( S ) ......................... 1” x 10m.

3715 7362-90 1 Spare parts kit ..................................... Reservestücksatz................................3715 7898-oo 1 Pulley Ø 90.......................................... Riemenscheibe Ø 90 .......................... For / vor 40 l/min.3050 0056-90 1 Flow control unit ( S ) .......................... Flusskontrollesatz ( S ) .......................

3715 8559-90 1 Flow messure kit ( S ) ......................... Flussmessersatz ( S ) .........................3715 8557-90 1 Accumulator kit ( S )............................ Akkumulatorsatz ( S ) .........................



14

TRIDO ® 80DG

8492 0209-98

3627

28

16

35

25

34

26

15

50

2122

24 49

19

18 14

20 23

29 31

178 39

6

48

42

17

31

37

41 6

33

32

38 31

9 10 11

4344

7

4546

5

47

12

4

2

1

13

40

3



15

TRIDO ® 80DG

8492 0209-98


1 3716 3544-00 1 Frame.................................................. Rahmen ..............................................2 3716 3548-00 1 Motor bracket ...................................... Motorkonsole ......................................3 3716 3550-00 1 Pump support ...................................... Pumpenhalterung................................4 3716 3553-00 2 Bracket ................................................ Haltebügel ..........................................5 3716 3554-00 1 Cover................................................... Abdeckung..........................................6 3716 3552-00 2 Bracket ................................................ Konsole ...............................................7 3716 3351-00 1 Diesel engine....................................... Dieselmotor......................................... F1L 210 D8 3715 2221-00 1 Gearbox............................................... Getriebe ..............................................9 3716 3532-00 1 Clutch .................................................. Kupplung.............................................

10 3715 2221-07 1 Friction plate........................................ Kupplungsscheibe...............................11 3716 3358-00 1 Driving disc.......................................... Antriebsscheibe ..................................12 0926 5041-00 1 Battery ................................................. Batterie................................................ 12FB66 TL13 3716 4257-00 2 Sign ..................................................... Schild .................................................. Trido 8014 8492 0208-08 1 Flush pump.......................................... Spülpumpe..........................................15 3715 7568-00 1 Nipple .................................................. Nippel.................................................. R 1 1/2” x R 2”

163715 7643-80 1 Safety valve ...........................................Sicherheitsventil..................................17 0147 1326-03 9 Screw................................................... Schraube............................................. U6S 8 x 30

18 0560 1309-00 1 Elbow................................................... Winkelstück......................................... R 1 1/2 x KR 1 1/2 9019 3715 7580-00 1 Nipple .................................................. Nippel.................................................. R 1 1/2” x R 2”20 3715 7331-00 1 Flange.................................................. Flansch ...............................................21 3715 7555-00 3 Spacer................................................. Distanzhülse .......................................22 0144 3291-03 3 Screw................................................... Schraube............................................. U6S 3/8 UNC x 38,23 0147 1244-03 3 Screw................................................... Schraube.............................................M6S 6 x 1224 3715 7334-00 1 Cover................................................... Abdeckung..........................................25 3715 7971-00 1 Manometer .......................................... Manometer.......................................... 0 - 100 bar 26 3715 7341-00 1 Nut....................................................... Mutter..................................................27 0661 1049-00 2 Seal ring .............................................. Dichtscheibe ....................................... TREDO 2328 3715 7550-00 1 Nipple .................................................. Nippel.................................................. R 1” x R 1”29 3715 7297-00 1 Coupling .............................................. Kupplung.............................................30 0196 1247-00 1 Screw................................................... Schraube............................................. SK6SS 6 x 2031 0333 2125-00 15 Spring washer ..................................... Federscheibe ...................................... FBB M832 3715 7347-00 1 Gear lever............................................ Getriebe hebel ....................................33 0362 1109-00 1 Lever knob........................................... Hebelknauf.......................................... 40 x M1035 3715 8542-00 1 Adapter ................................................ Adapter .............................................. R 1/4 - UN 3/4 - 16

36 3176 8270-00 1 Nipple .................................................. Nippel.................................................. UN 3/4 x R 3/837 0211 1362-00 3 Screw................................................... Schraube............................................. MC6S 10 x 2538 0144 4246-03 6 Screw................................................... Schraube............................................. U6S 5/16 UNF x 1939 0147 1363-03 8 Screw................................................... Schraube............................................. M6S 10 x 3040 0144 3363-03 4 Screw................................................... Schraube............................................. 1/2” UNC x 32

41 0144 4285-00 4 Screw................................................... Schraube............................................. U6S UNCF 3/8 x 1942 0147 1400-03 2 Screw................................................... Schraube............................................. M6S 12 x 2543 0147 1364-03 4 Screw................................................... Schraube............................................. M6S 10 x 3544 0301 2344-00 4 Washer................................................ Scheibe ............................................... 10,5 x 22 x 245 0291 1108-00 2 Nut....................................................... Mutter.................................................. M6

46 0301 2326-00 2 Washer................................................ Scheibe............................................... BRB 6,7 x 14 x 1,547 3716 3643-00 1 Rubber sheet....................................... Gummielement....................................48 0301 2358-00 2 Washer................................................ Scheibe ............................................... BRB 13 x 24 x 249 0196 1321-00 1 Screw................................................... Schraube............................................. SK6SS 8 x 14

50 3715 7298-00 1 Key ...................................................... Keil ......................................................

51 3716 4653-00 1 Bracket ................................................ Konsole ...............................................52 3176 4091-00 1 Switch.................................................. Ausschalter .........................................53 0147 1246-03 2 Screw................................................... Schraube.............................................54 0291 1108-00 2 Lock nut............................................... Kontermutter .......................................55 0301 2326-00 2 Washer................................................ Scheibe ...............................................56 0147 1205-03 2 Screw................................................... Schraube.............................................57 0291 1107-00 2 Lock nut............................................... Kontermutter .......................................

Optional equipment ( S ) ..........................................Sonderausstattung ( S )

3715 7317-90 1 Suction hose ( S )................................ Saugschlauch ( S ) ............................. 2” x 6m.3715 7327-90 1 Pressure hose ( S ) ............................. Druckschlauch ( S ) ............................ 1” x 10m3715 7362-90 1 Spare parts kit ..................................... Reservestücksatz................................3715 7397-01 1 Elastic gear ring................................... Elastisch Zahnkranz............................3050 0056-90 1 Flow control unit ( S ) .......................... Flusskontrollesatz ( S ) .......................

3715 8559-90 1 Flow measure kit ( S ).................................. Flussmessersatz ( S )..................................3715 8557-90 1 Accumulator kit ( S )............................ Akkumulatorsatz ( S ) .........................



TRIDO 80 EG

8492 0209-72

16

30

29 1628

1 10 13 32 31 14 734

45 15 52

59

4948

4344

5657

51 60 54 555334

35

4446

20385

475011

12

4

25 6

19

26 18

58

2

3

36 39 41 43

9

8



TRIDO 80 EG

8492 0209-72


0690 1116 00 2 Plate .................................................... ............................................................3715 0959 00 1 Tool box............................................... ............................................................3715 7453 00 1 Puller ................................................... ............................................................3715 7454 00 1 Puller ................................................... ............................................................3715 8459 00 1 Plate .................................................... ............................................................

3716 5857 00 1 CE sign................................................ ............................................................1 8492 0208 08 1 Flushpump........................................... Spülpumpe.......................................... 802 3715 7568 00 1 Nipple .................................................. Nippel..................................................3 3715 7643 80 1 Safety valve......................................... Ventil...................................................4 3716 5133 00 1 Bracket ................................................ ............................................................

5 3716 3544 00 1 Frame.................................................. Rahmen ..............................................6 0144 3363 03 4 Screw................................................... Schraube.............................................7 0147 1326 03 4 Screw................................................... Schraube.............................................8 0560 1309 00 1 Elbow................................................... ............................................................9 3715 7580 00 1 Nipple .................................................. Nippel..................................................

10 3715 7331 00 1 Flange.................................................. Flansch ...............................................11 3715 7555 00 3 Spacer................................................. ............................................................12 0144 3291 03 3 Screw................................................... Schraube.............................................13 0147 1243 03 3 Screw................................................... Schraube.............................................14 3715 7334 00 1 Protection ............................................ ............................................................

15 3716 3552 00 2 Bracket ................................................ ............................................................16 3715 7971 00 1 Pressure gauge................................... Manometer.......................................... DIM 6318 3715 7341 00 1 Nut....................................................... Mutter..................................................19 0661 1049 00 1 Seal washer......................................... Dichtungsscheibe................................20 3716 5134 00 1 Bracket ................................................ ............................................................

25 0301 2358 00 4 Washer................................................ Scheibe ...............................................26 3715 7550 00 1 Nipple .................................................. Nippel..................................................28 0653 0905 05 1 Gasket ................................................. ............................................................29 3715 8542 00 1 Nipple .................................................. Nippel..................................................

30 3176 8270 00 1 Nipple .................................................. Nippel..................................................31 3715 7297 00 1 Coupling .............................................. Kupplung.............................................32 0196 1247 00 1 Set screw............................................. Schraube.............................................34 0333 2125 00 8 Lock washer ........................................ ............................................................35 3716 1396 00 1 Electric motor ...................................... El. Motor..............................................36 3715 8597 80 1 Starter box........................................... ............................................................

38 3716 4257 00 2 Plate .................................................... ............................................................39 0300 8006 00 4 Plain washer........................................ ............................................................41 0291 1111 00 2 Lock nut............................................... Mutter..................................................43 0147 1362 03 10 Screw................................................... Schraube.............................................44 0301 2344 00 12 Washer................................................ Scheibe ...............................................

45 3715 7840 00 1 Gear box.............................................. ............................................................46 0147 1364 03 4 Screw................................................... Schraube.............................................47 0147 1400 03 2 Screw................................................... Schraube.............................................

48 3715 7347 00 1 Lever.................................................... ............................................................49 0362 1109 00 1 Ball knob.............................................. ............................................................

50 0301 2358 00 2 Washer................................................ Scheibe ...............................................51 3715 7582 00 1 Spacing part ........................................ ............................................................52 0144 4285 00 4 Screw................................................... Schraube.............................................53 0211 1326 00 4 Cap screw ........................................... Schraube.............................................54 3715 7586 00 1 Sleeve.................................................. ............................................................

55 0147 1400 03 4 Screw................................................... Schraube.............................................56 0144 4246 03 6 Screw................................................... Schraube.............................................57 0333 2125 00 6 Lock washer ........................................ ............................................................58 0663 9186 00 1 O-ring................................................... O-ring..................................................59 3716 3532 00 1 Coupling .............................................. Kupplung............................................. BORG o BECK 8”60 3715 2221 07 1 Friction sheet....................................... ............................................................

17



TRIDO 80 H2S

8492 0212-69

18

277

2662

244

233

255

1

11 7

10 9

8

4

10

3

21

222

188 177

199

20 5

166

144

133

155

122

6



19

TRIDO 80 H2S

8492 0212-69


1 8492 0208-08 1 Flush pump.............................................Spülpumpe ..........................................BEAN L0918BCD2 3718 0401-64 1 Frame.....................................................Rahmen...............................................3 3716 6395-00 1 Flange ....................................................Flansch................................................4 3716 5887-00 1 Flange ....................................................Flansch..............................................5 3716 6397-00 1 Coupling .................................................Kupplung .............................................

6 3716 6396-00 1 Hydraulic motor ......................................Hydraulischer Motor ............................7 0144 3288-03 3 Screw .....................................................Schraube .............................................U6S UNC 3/8”x 32fzb8 0147 1400-03 4 Screw .....................................................Schraube .............................................M6S 12 x 259 0144 3362-03 4 Screw .....................................................Schraube.............................................U6S 1/2 UNC x 25

10 0301 2358-00 8 Washer ...................................................Scheibe................................................BRB 13x24x2

11 0301 2344-00 3 Washer ...................................................Scheibe................................................BRB 10,5x22x212 0211 1402-00 4 Cap screw ..............................................Kopfschraube ......................................MC6S 12x3513 3176 6515-00 2 Nipple .....................................................Nippel ..................................................UN 7/8 x R 1/214 3176 6348-00 1 Nipple .....................................................Nippel ..................................................R 3/8 x UN 7/1615 0686 9250-62 2 Plug........................................................Schlusstück .........................................GUI 1615

16 0686 9250-60 1 Plug........................................................Schlusstück .........................................GUI 161017 3715 7568-00 1 Nipple .....................................................Nippel ..................................................R 1”-1” NPTF18 3715 7341-00 1 Nut..........................................................Mutter ................................................19 0663 9186-00 1 O-ring .....................................................O-ring...................................................29,75 x 3,53 HB 7020 3715 7643-80 1 Safety valve............................................Sicherheitsventil ..................................21 3715 7550-00 1 Nipple .....................................................Nippel ..................................................R 1”- R 1”

22 0661 1049-00 1 Seal washer............................................Dichtungsscheibe................................Tredo 2323 3176 8270-00 1 Nipple .....................................................Nippel ..................................................UN 3/4“x R 3/8”24 3715 8542-00 1 Nipple .....................................................Nippel ..................................................R 1/4”- UN 3/4”-1625 3715 7971-00 1 Pressure gauge DIM 63.........................Manometer ..........................................100 bar/MPa R1/426 0560 1309-00 1 Elbow......................................................Winkelstück .........................................R1 1/2”xKR1 1/2” 90°27 3715 7580-00 1 Nipple .....................................................Nippel ..................................................R 1 1/2”x R 2”

Optional equipment ( S ) ...................... Sonderausstattung ( S )....................

3715 7317-90 1 Suction hose ( S ) ..................................Saugschlauch ( S )..............................2” x 10m3715 7327-90 1 Pressure hose (S ) .................................Druckschlauch ( S ).............................1” x 10m3715 7362-90 1 Spare parts kit........................................Reservestücksatz ................................Trido 803715 7297-01 1 Elastic gear ring .....................................Elastisch Zahnkranz..........................

3715 7453-00 1 Remover.................................................Ausbauwerkzeug.................................Piston / Kolben3715 7454-00 1 Remover.................................................Ausbauwerkzeug.................................Valve seat / Ventilsitz3715 8178-90 1 Flush pump control.................................Spülpumpe Kontrolle...........................Diamec 251 / 2523715 8191-90 1 Hydraulic hose kit...................................Hydraulischer schlauchsatz ..............3715 8557-90 1 Accumulator kit ( S )...............................Akkumulatorsatz ( S )........................

3715 8559-90 1 Flow measure kit ( S ) ............................Flussmessersatz ( S ) .......................



20

Flush pump / Spülpumpe

Spolpump/ Bomba de inyeccion/ Pompe d´injection / Corpo pompa

8492 0208-08

46 39

24

43

36

59

26

15

54 5534

33

6033

3519

29 30 46

5842

41

52,53

47

4623

25

483828

4324

184627

3732

37

51

1056

31

4412

1289 7

21

5713

1116

49

1

49

56

22

2

17

49

14

3 40

4

ToolsWerkzeugeVerktyg

61

62

DISC VALVE KIT

3716 6593 00/90

A



21

Flush pump / SpülpumpeSpolpump / Bomba de inyeccion / Pompe d´injection / Corpo pompa

8492 0208-08


1 3715 7398-00 1 Valve housing ..................................... Ventilgehäuse..................................

2 3715 7352-00 3 Valve cover......................................... Ventildeckel .....................................3 3715 7351-00* 6 Ball...................................................... Kugel................................................4 3715 7350-00* 6 Valve seat........................................... Ventilsitz ..........................................5 3715 7365-00 3 Plunger cup......................................... Kolben..............................................

6 3715 7366-00 3 Collar support ..................................... Halter...............................................7 3715 7367-00 3 Nut ...................................................... Mutter...............................................8 3715 7364-00* 3 Gasket ................................................ Dichtung...........................................9 3715 7361-00 3 Nut ...................................................... Mutter...............................................

10 3715 7362-00* 3 Cylinder............................................... Zylinder............................................

11 3715 7356-00 3 Cylinder head...................................... Zylinderkopf.....................................12 3715 7363-00* 6 Cylinder gasket................................... Zylinderdichtung ..............................13 3715 7357-00* 3 Gasket ................................................ Dichtung...........................................14 3715 7353-00* 3 Gasket valve....................................... Dichtung...........................................15 3715 7359-00 3 Crosshead & rod................................. Kreuzkopf e Stange.........................

16 3715 7355-00 3 Clamp ................................................. Klemme............................................17 3715 7354-00 3 Clamp ................................................. Klemme............................................18 3715 7382-00 1 Cap ..................................................... Verschlusskappe .............................19 3715 7373-00 3 Pin....................................................... Stift...................................................20 3715 7384-00 2 Stud .................................................... Bolzen..............................................

21 3715 7385-00 6 Stud .................................................... Bolzen..............................................22 3715 7386-00 6 Stud .................................................... Bolzen..............................................23 3715 7379-00 2 Bearing housing.................................. Lagergehäuse..................................24 3715 7381-00 2 Gasket ................................................ Dichtung...........................................25 3715 7377-00 2 Gasket ................................................ Dichtung...........................................

26 3715 7387-00 1 Cap ..................................................... Verschlusskappe .............................27 3715 7388-00 3 Gasket .............................................. Dichtung...........................................28 3715 7389-00 1 Pump case.......................................... Pumpengehäuse..............................29 3715 7390-00 1 Gasket ................................................ Dichtung...........................................30 3715 7391-00 1 Cover .................................................. Abdeckung.......................................

31 3715 7368-00 3 Nut ...................................................... Mutter...............................................32 3715 7392-00 3 Sleeve................................................. Hülse................................................33 3715 7369-00 3 Piston rod............................................ Kolbenstange...................................34 3715 7372-00 3 Bearing ............................................... Lager................................................35 3715 7374-00 1 Crankshaft .......................................... Kurbelwelle......................................

36 3715 7380-00 1 Pinion shaft......................................... Ritzelwelle........................................37 3715 7397-00* 6 Plunger rod seal ................................. Kolbenstangendichtung...................38 3715 7378-00 5 Shim.................................................... Beilagscheibe ..................................39 3715 7383-00 1 Cover .................................................. Abdeckung.......................................40 3715 7393-00 1 Cover plate ......................................... Abdeckung.......................................

41 0544 2162-00 3 Lub.nipple ........................................... Schmiernippel.................................. H1 KR 1/842 3715 7360-00 6 Screw.................................................. Schraub ...........................................43 0502 2106-00 2 Ball bearing......................................... Kugellager........................................ 620644 3715 7395-00 3 Seal holder.......................................... Dichtunghalter..................................

46 0144 3285-03 12 Screw.................................................. Schraube ......................................... UNC 3/8 x 1946A 0144 3282-03 14 Screw.................................................. Schraube ......................................... UNC 3/8 x 13

47 0144 3360-03 2 Screw.................................................. Schraube ......................................... UNC 1/2 x 1948 3715 7449-00 2 Plug..................................................... Stopfen ............................................49 0268 3108-00 14 Nut ...................................................... Mutter............................................... U6M UNC 1/2”51 3715 7396-00 3 O-Ring ................................................ O-Ring .............................................52 3715 7375-00 2 Bearing ............................................... Lager................................................

53 3715 7376-00 2 Bearing ............................................... Lager................................................54 3715 7371-00 3 Bushing............................................... Hülse................................................55 3715 7370-00 6 Bolt...................................................... Bolzen..............................................56 3715 7923-00 1 Plug..................................................... Stopfen ............................................ 1” NPT57 3715 7924-00 2 Plug..................................................... Stopfen ............................................ 1 1/2” NPT

58 3715 7452-00 1 Petcock ............................................... Ablasshahn......................................59 3715 7298-00 1 Key...................................................... Keil...................................................

60 3715 7922-00 6 Nut ...................................................... Mutter...............................................61 3715 7453-00 1 Remover ............................................. Ausbauwerkzeug.............................62 3715 7454-00 1 Remover ............................................. Ausbauwerkzeug.............................

Optional Equipment ( S ) ........................................Sonderausrüstung ( S )- 3715 7362-90 1 Spare parts kit .................................... Ersatzteilsatz ...................................- 3716 6593 00 1 Disc valve ass..................................... Ventil................................................ 1 valve- 3716 6593 90 1 Disc valve kit....................................... Ventil kit ........................................... 6 valves

*) Included in 3715 7362-90



22

Safety valve / Sicherheitsventil, Starting unit / Motor ausschalter Säkerhetsventil / Soupape de sécurité / Válvula de seguridad / Valvola di sicurezzaStartenhet / Unité de démarrage / Arrancador / Avviamento

12

8

7

6

5

4

13

3

2

1

11

9

2

1

3

5

4



23

Safety valve / SicherheitsventilSäkerhetsventil / Soupape de sûreté / Válvula de seguridad / Valvola di sicurezza

3715 7643 80

Ref. No. Part No. Qty. Description Bezeichnung Note

1 3715 7643-00 1 Valve housing....................................... Ventilkammer ....................................2 3715 8585-00 1 Valve seat ............................................ Ventilsitz............................................3 3715 7663-00 1 Ball ....................................................... Ball ....................................................4 3715 7644-00 1 Pipe...................................................... Rohr...................................................5 3715 7671-00 1 Spring................................................... Feder.................................................

6 0663 2127-00 1 O-ring ................................................... O-ring ................................................ 24,2 x 37 3715 7646-00 1 Spindle ................................................. Spindel ..............................................8 3715 7645-00 1 Nut ....................................................... Mutter ................................................9 3716 4400-00 1 Spacer.................................................. Dichtung ............................................

11 0686 3106-00 2 Plug...................................................... Stopfen.............................................. KR 1” T812 0266 2114-00 1 Nut........................................................ Mutter ................................................ M6 M16

13 3715 8142-00 1 Pin........................................................ Stift....................................................

Starting unit / Motor ausschalter Startenhet / Unité de démarrage / Arrancador / Avviamento

3715 8597-80


1 3715 8597-00 ..........1 Bracket ................................................. Haltebügel.........................................2 3715 3741-01 ..........1 Star-delta starter .................................. Sterndreieckschaltung....................... MEI LT2/USP 11-17 A

3 3715 3741-02 ..........1 A-safety switch..................................... Sicherheitsausschalter ...................... Wesco SA 254 0160 6062-00 ..........4 Screw ................................................... Schraube........................................... MCS 5 x 16 4,8 FZB5 0291 1107-00 ..........4 Lock nut................................................ Gegenmutter ..................................... M5



Optional equipment / SonderausrüstungExtra utrustning / Equipment en option / Equipo opcional / Attrezzature opzionali

24

12 13

11

14

13

12

5

6

10

9

7

15

16

20

17

3

4

2

21

16

18

19

1



25

Optional equipment / SonderausrüstungExtra utrustning / Equipment en option / Equipo opcional / Attrezzature opzionali


3715 7327-90 ..........1 Pressure hose,compl ........................... Druckschlauch kompl ........................1 3715 7327-00 ..........1 -Hose.................................................... -Schlauch .......................................... 1” x 10m2 3715 1549-00 ..........1 -Nipple.................................................. -Nippel............................................... R 3/4” x R 1”2 3715 7550-00 ..........1 -Nipple.................................................. -Nippel............................................... R 1” x R 1”2 3715 7551-00 ..........1 -Nipple.................................................. -Nippel............................................... R 1” x R 1 1/4”

3715 7317-90 ..........1 Suction hose,compl.............................. Saugschlauch kompl .........................3 3715 7317-00 ..........1 -Spiral suction hose ............................. -Spiralsaugschlauch.......................... 2” x 6m4 3715 7552-00 ..........1 -Strainer ............................................... -Seihe................................................

3715 8557-90 ..........1 Accumulator kit,compl.......................... Akkumulatorsatz kompl .....................5 3716 2752-00 ..........1 -Accumulator ........................................ -Akkumulator ..................................... 0,7 L 1” NPT6 3716 2751-00 ..........1 -Elbow .................................................. -Winkelstück...................................... 1” NPT INV. 90°7 3715 7568-00 ..........1 -Nipple.................................................. -Nippel............................................... R 1” x R 1”8 0661 1049-00 ..........1 -Sealing ring......................................... -Dichtungsring ................................... Tredo 23

9 0663 9186-00 ..........1 -O-ring .................................................. -O-ring ............................................... 29,75 x 3,53

10 3715 7341-00 ..........1 -Nut ...................................................... -Mutter...............................................

3715 8559-90 ..........1 Flow measure kit,compl ...................... -Flussmessersatz kompl. ..................11 3715 8559-00 ..........1 -Flow meter .......................................... -Flussmesser.....................................12 3715 7549-00 ..........2 -Nipple.................................................. -Nippel............................................... R 3/4” x R 1”13 0661 1038-00 ..........2 -Seal ring.............................................. -Dichtungsring ................................... Tredo 2014 0661 1049-00 ..........1 -Sealing ring......................................... -Dichtungsring................................... Tredo 23

3050 0056-90 ..........1 Flow control unit,compl. ....................... Flusskontrollesatz kompl...................15 3050 0056-80 ..........1 -Flow control valve ( S ) ....................... -Flusskontrolleventil ( S ) ..................16 0347 6106-00 ..........2 -Hose clip ............................................. -Schlauchklemme..............................17 9030 0400-00 ..........1 -Hose.................................................... -Schlauch .......................................... 5/8” x 0,4m18 9000 0244-00 ..........1 -Hose nipple ......................................... -Schlauchnippel................................. 5/8”Hose/Schlauch -

R 1/2” U19 0605 8532-03 ..........1 -Bushing............................................... -Hülse................................................ R 2” U x R 1/2” l20 0564 0010-03 ..........1 - Tee..................................................... -T-stück ............................................. R 2” x R 2” x R 2”

21 3715 7338-00 ..........1 -Nipple.................................................. -Nippel............................................... R 2” x R 2”22 0661 1049-00 ..........1 -Sealing ring......................................... -Dichtungsring................................... Tredo 23



Flow control valve / FlusskontrolleventilKonstantflödesventil / Régulateur de débit / Vàlvula de control de flujo / Valvola regolatrice di portata

3050 0056-80

26

4

5

3

6

7

1

8

9

2



27

Flow control valve / FlusskontrolleventilKonstantflödesventil / Régulateur de débit / Vàlvula de control de flujo / Valvola regolatrice di portata

3050 0056-80


1 3050 0056-00 1 Valve housing...................................... Ventilkammer......................................2 9000 0244-00 1 Hose nipple ......................................... Schlauchnippel.................................... 5/8” Hose/Schlauch-

R 1/2” U3 3050 0058-00 1 Gland................................................... Gland ..................................................4 3715 8556-00 1 Tommy bar .......................................... Schraubgriff.........................................5 0108 1194-00 1 Spring pin ............................................ Federstift............................................. FRP 3 x 16

6 0663 2116-00 2 O-ring................................................... O-ring .................................................. 9,3 x 2,47 3050 0057-00 1 Valve.................................................... Ventil...................................................8 3050 0059-00 1 Valve rubber........................................ Ventilschlauch.....................................9 0603 4106-03 1 Nipple .................................................. Nippel.................................................. R 12 x N8



TRIDO 80 H2S KIT

3716 6396-90

28

11 7

8

4

10

3

5

166

144

133

155

122

6



29

TRIDO 80 H2S KIT

3716 6396-90


3 3716 6395-00 1 Flange ....................................................Flansch................................................4 3716 5887-00 1 Flange ....................................................Flansch................................................

5 3716 6397-00 1 Coupling .................................................Kopplung .............................................6 3716 6396-00 1 Hydraulic motor ......................................Hydraulischer Motor..........................7 0144 3288-03 3 Screw .....................................................Schraube .............................................U6S UNC 3/8”x32 fzb

8 0147 1400-03 4 Screw .....................................................Schraube .............................................M6S 12x2510 0301 2358-00 4 Washer ...................................................Scheibe................................................BRB 13x24x2

11 0301 2344-00 3 Washer ...................................................Scheibe................................................BRB 10,5x22x212 0211 1402-00 4 Cap screw ..............................................Kopfschraube ......................................MC6S 12x3513 3176 6515-00 2 Nipple .....................................................Nippel ..................................................UN 7/8 x R 1/214 3176 6348-00 1 Nipple .....................................................Nippel ..................................................UN 9/16 x R 1/415 0686 9250-62 2 Plug ........................................................Schlusstück .........................................GUI 1615

16 0686 9250-60 1 Plug ........................................................Schlusstück .........................................GUI 1610

Optional equipment ( S )...................... Sonderausstattung ( S )....................

3715 7317-90 1 Suction hose ( S ) ..................................Saugschlauch ( S )..............................2” x 10m3715 7327-90 1 Pressure hose (S ) .................................Druckschlauch ( S ).............................1” x 10m3715 7362-90 1 Spare parts kit........................................Reservestücksatz ................................Trido 803715 7297-01 1 Elastic gear ring .....................................Elastisch Zahnkranz..........................

3715 7453-00 1 Remover.................................................Ausbauwerkzeug.................................Piston / Kolben3715 7454-00 1 Remover.................................................Ausbauwerkzeug.................................Valve seat / Ventilsitz3715 8178-90 1 Flush pump control.................................Spülpumpe Kontrolle...........................Diamec 251 / 2523715 8191-90 1 Hydraulic hose kit...................................Hydraulischer schlauchsatz ..............3715 8557-90 1 Accumulator kit ( S )...............................Akkumulatorsatz ( S )........................

3715 8559-90 1 Flow measure kit ( S ) ............................Flussmessersatz ( S ) .......................



30

TRIDO 80 WP

3716 5887 80

25

24

23

1

22627

4 10,8

3

9,10

11,7

20

21,2219,1817

52816,14

15,13

6 12



TRIDO 80 WP

3716 5887 80

Ref. No. Part No. Qty. Description Notes

1 8492 0208 08 1 FLUSH PUMP .......................................80 ......................................................2 3718 0401 64 1 FRAME...................................................3 3716 6395 00 1 FLANGE ................................................. ..4 3716 5887 00 1 FLANGE.................................................5 3716 6397 00 1 COUPLING.............................................

6 3716 6396 00 1 MOTOR ..................................................7 0144 3288 03 3 SCREW..................................................U6S UNC 3/8 x 32 FZB ....................8 0147 1400 03 4 SCREW..................................................M6S 12 x 25......................................9 0144 3362 03 4 SCREW..................................................U6S 1/2 UNC x 25 ............................

10 0301 2358 00 8 WASHER................................................BRB 13 x 24 x 2................................

11 0301 2344 00 3 WASHER................................................BRB 10.5 x 20 x 2.............................12 0211 1402 00 4 CAP SCREW..........................................MC6S 12 x 35 ...................................17 3715 7568 00 1 NIPPLE...................................................R 1"- 1" NPTF ...................................18 3715 7341 00 1 NUT ........................................................19 0663 9186 00 1 O-RING ..................................................29.75 x 3.53 HÅRDHET 70...............

20 3715 7643 80 1 SAFETY VALVE.....................................21 3715 7550 00 1 NIPPLE...................................................R 1" x R 1" ........................................22 0661 1049 00 1 SEAL WASHER .....................................TREDO 23.........................................23 3176 8270 00 1 NIPPLE...................................................UN 3/4" x R 3/8"................................24 3715 8542 00 1 NIPPLE...................................................R 1/4"- UN 3/4"-16 ............................

25 3715 7971 00 1 PRESSURE GAUGE..............................DIM 63, 100 BAR R1/4 .....................26 0560 1309 00 1 ELBOW ..................................................R1 1/2 x KR1 1/2 90 GR...................27 3715 7580 00 1 NIPPLE...................................................R 1 1/2"x R 2" ...................................

Manual de Partes Trido 80

Documents

Transcript of Manual de Partes Trido 80