USER GUIDEYAMAHA RD350LC

By :German Castro LopezAlejandro Lopez Velez

Sumary:

1-Description2-security and confort3-Instruments and controls-4-instrumentions for onperating5-service and maintenence

Description

the bike has :

-tail lamp-intermittent rear lamp-Exhaust silencer-new monotransversal suspension-starter pedal-front fender-brake pedal-foot rest-helmet-front fork-headlight

Description

-cover-Fuel tank-seat-shift lever-Clutch lever-Handle switch-speedometer-tachometer-temperature sensor-Brake lever-throttle grip-Flashing light front

Note:The motorcycle you have purchased may differ partially from that shown in the photos.

SECURITY AND CONFORT

-Rear suspension:lubricate joints with the recommended lubricant is lithium based grease

-Dynamic Damping Control :This is a system whose origin can be found in the rocker "Paralever", whose mission was to improve the transmission of force to the rear wheel.

Brakes:1-Make the lever and the brake pedal work properly2-check the brake fluid level3 - Check the disc five tapesNote: when you sit on the brake lever is a feeling spongy signal system failure brakes .visite a Yamaha dealer immediately to make immediate repairs.

CONTROL FUNCTIONS-switch : controls the ignition and lighting system

measuring engine temperatureThis gauge indicates the temperature of cooling when the main switch is ON

• indicator Lights1. flag indicator light turn "TURN"this light comes on intermittently to be turning the switch to "ON"2. Neutral indicator light "NEUTRAL"Lights when the transmission is in neutral3. high beam indicator lightwhen using the headlight high beam this light comes on4. Oil warning light "OIL"Lights when the oil level is low

speedometerthe odometer and trip meter are located within the speedometer. use the odometer to calculate how much content can go with fuel before check empty.

tachometerthis model has an electric tachometer so that the driver can monitor the engine speed has.

instructions for operatinghaving Read the entire owners manual note these instructions What you do before starting a motorcycle trip is very important towell will determine whether your destination. Before leaving, a safe driver ensures:1. Use the proper attire. Driving with permission, must wear a helmet andeye protection.2. Familiar with the motorcycle.3. Check the motorcycle equipment.4. Being a responsible driver.5. properly follow traffic signals

SERVICE AND MAINTENANCE

Periodic inspection, adjustment and lubrication will keep your motorcycle safely and maximum efficiencies. security is an obligation of the owner to program maintenance and lubrication may be considered strictly as a general maintenance and lubrication intervals.