Maintenance, Repair and Overhaul Solutions Guide · At Henkel Corporation, we invent more than just...

Maintenance, Repair and OverhaulSolutions GuideMaintenance, Repair and OverhaulSolutions Guide

www.henkel-ap.com/MRO

At Henkel Corporation, we invent more than just quality

LOCTITE® branded products. We also provide global

solutions to industries’ biggest challenges. Through close

collaboration with our customers, we help to protect your

assets by enhancing reliability, reducing operating costs and

improving your ability to compete in today’s demanding

production environment. Henkel is dedicated to earning and

keeping the trust of our customers. Through this philosophy,

Henkel has assumed a position of worldwide leadership.

With this comprehensive guide for maintenance engineers in all

industries, you can easily select the correct LOCTITE® branded product

needed to overcome your immediate problems and to prevent future

breakdowns and failures. Some of the most common maintenance

problems and solutions can be found in the Table of Contents.

This guide has been developed to make your product selection quicker,

easier and right the first time. We have even included a “Need It Now!”

order form so you can quickly select the products you need. However,

if more information is needed, all you have to do is visit our website

at www.henkel-ap.com/MRO, or call our offices in your countries for

assistance.

Achieving more with less

Our commitment to leadership in sustainability is deeply embedded in our values. With our revised Sustainability Strategy for 2030, we are building on our strong track record. At the same time, we are aiming to address one of the central future challenges: to decouple growth from resource consumption. At the heart of this strategy is therefore the simple, yet challenging, ambition: to achieve more with less. It aims to create more value for our customers, consumers, communities and the company alike, while simultaneously reducing the environmental footprint.

Sustainability

2 | Maintenance, Repair and Overhaul Solutions Guide

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

38

40

TABLE OF CONTENTS

AGENCY LISTINGS 41PRODUCT ORDERING INFORMATION 42FLUID COMPATIBILITY CHART 45NEED IT NOW 49A

PPEN

DIX

THREADLOCkING Prevent fastener loosening and seizure

THREAD SEALING Prevent leaks – air, hydraulic

GASkETING Prevent flange leaks – oil, transmission, coolant

RETAINING Prevent backlash – keyway wallow, spun bearings, shaft misalignment,

wear, corrosion

INSTANT BONDING Bond dissimilar parts quickly and easily

STRUCTURAL BONDING Bond structural assemblies and repair damaged parts

FLEXIBLE BONDING AND SEALING Bond and seal parts that experience movement

METAL REPAIR SYSTEM Repair worn surfaces and damaged parts

FLOOR AND CONCRETE REPAIR Restore old concrete or cracked floors

WEAR PREvENTION – RECLAIM AND REPAIR Rebuild worn or corroded surfaces

GROUTING Mount heavy equipment or set anchor bolts

ANTI-SLIP TRACTION SYSTEM Guard against slippery pedestrian or vehicular areas

RUBBER AND BELT REPAIR Repair damaged conveyor belts

ANTI-SEIzE LUBRICANTS Prevent rust, corrosion, galling or seizing on metal parts in extreme environments

SURFACE PROTECTION AND RUST TREATMENT Stabilize existing rust, guard against corrosion

CLEANING Clean and degrease parts and work surfaces

LUBRICANTS Prevent friction, heat or wear between metal surfaces

SPECIALTY AND EMERGENCY REPAIR kITS

ACCESSORIES

ThreadlockingLocking of threaded fasteners

» PREvENTS LOOSENING FROM SHOCk AND vIBRATION » SINGLE COMPONENT – CLEAN AND EASy TO APPLy » CAN BE uSED ON vARIOuS SIzES OF FASTENERS – REDuCES INvENTORy COSTS » SEALS THREADS » STOPS RuST AND CORROSION

are The parTS already aSSembled?

Helpful Hints:• Clean parts with LOCTITE® ODC-Free Cleaner and Degreaser before

applying the adhesive.• If the threadlocker will be applied below 40°F (5°C), pre-treat with

LOCTITE® 7649 Primer N.• If the parts were in contact with aqueous washing solutions or

cutting fluids that leave a protective layer on the surface, wash with hot water before use.

yeS no

Wicking – green What strength do you require?

low – purple medium – blue high – red

liquid product liquid product liquid product Semi-Solid product liquid product Semi-Solid product

henkel SolUTionS locTiTe® 290 locTiTe® 222 locTiTe® 243 locTiTe® 248 locTiTe® 263 locTiTe® 268

Fastener Size #2 to 1/2" (M2 to M12) up to 1/4" (up to M6) 1/4" to 3/4" (M6 to M20) 1/4" to 3/4" (M6 to M20) up to 1" (up to M25) up to 3/4" (up to M20)

Strength High Low Medium Medium High High

Cure Time (Fixture/Full Strength)* 20 min./24 hr. 10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 20 min./24 hr.

Breakaway/Prevail Torque lb.in. (N.m) 90/260 (10/29) 53/30 (6/3) 180/62 (20/7) 110/43 (12/4) 275/290 202/4 (22/0.5)

Temperature Resistance for Continuous Service 300°F (150°C) 300°F (150°C) 360°F (180°C) 300°F (150°C) 360°F (180°C) 300°F (150°C)

Package Size & IDH10 ml bottle - 1595016 50 ml bottle - 232085250 ml bottle - 235226

10 ml bottle - 159501750 ml bottle - 228581

250 ml bottle - 228582

10 ml bottle - 133153750 ml bottle - 1311320250 ml bottle - 1311322

9 g stick - 3777219 g stick - 37773


250 ml bottle - 1307416

9 g stick - 106929719 g stick - 902328

Recommended for locking pre-assembled fasteners, i.e. instrumentation screws, electrical connectors, and set screws. Also seals porosities in welds and metal parts.

Recommended for low strength threadlocking of adjustment screws, countersunk head screws, and set screws; on collars, pulleys, tool holders, and controllers. Also for low strength metals such as aluminum or brass.

With improved oil tolerance, LOCTITE® 243 Threadlocker is effective on all types of metal threaded fasteners. Prevents loosening on vibrating parts such as pump, motor mounting bolts, gear boxes, or presses. Removable with hand tools.

Semi-solid stick form is convenient, portable, and great for hard-to-reach applications. LOCTITE® 248 Threadlocker – Medium Strength is the ideal general–purpose threadlocker for all nut and bolt applications, especially fasteners between 1 ⁄4" and 3 ⁄4" (M6 to M20). Removable with hand tools. Oil tolerance & primerless.

versatile, high strength liquid threadlocker. Reliably locks and seals metal fasteners up to 1". Engineered to cure consistently on a variety of metals, despite minor surface contaminants. Works on steel, stainless steel and most plated fasteners. Tolerates thread lubrication, anti-corrosion and protection fluids. Rated for 360°F (180°C). Heat required for removal.

This convenient semisolid stick form is portable and less messy. Its high strength prevents loosening of threaded fasteners. Well suited for heavy-duty applications. Oil tolerance & primerless.

* Typical value @ 70°F (22°C)

addiTional prodUcTS

NameStrength/

Color

Breakaway/Prevail Torque lb./in.

(N.m)Features

locTiTe® 242 Medium - Blue 110/43 (12/4) Fasteners 1/4" to

3/4" (M6 to M20)

locTiTe® 220 Low - Blue 80/170

Removable grade, wicking, for small threads of 1/4" or

smaller

locTiTe® 277 High - Red 250/275 (28/31) Fasteners up to 1½"

locTiTe® 262 High - Red 189/275 (21/31) Fasteners up to 3/4" (M20)

locTiTe® 271 High - Red 250/275 (28/31) Fasteners up to 1" (up to M25)

locTiTe® 272 High - Orange 200/220 (22/24) High Temp up to

11/2" (M36)

locT

iTe®

pr

imer

S

Use locTiTe® primer to:1. Activate inactive surfaces.2. Speed cure times for faster return

to service.3. Speed curing through larger gaps

and deep threads.4. Substantially speed cure times on

cold parts.5. Act as a cleaning agent.

Name Color viscosity Base On-Part Life Dry Time Package Size & IDH

primer is optional with:Active surfaces: Brass, copper, bronze, iron, soft steel, nickel.

primer is required with:Inactive surfaces: Aluminum, stainless steel, magnesium, zinc, black oxide, cadmium, titanium, and others.

7649 primer n Clear/Green 2 Acetone 30 days 30 to 70 seconds

1.75 oz. - 1179077100 ml - 555114 4.5 oz. - 475763 500 ml - 487644

7471 primer T Amber 2 Acetone/Isopropanol

7 days 30 to 70 seconds

1.75 oz - 1179078100 ml - 5551044.5 oz. - 555110500 ml - 555112


are The parTS already aSSembled?

Helpful Hints:• Clean parts with LOCTITE® ODC-Free Cleaner and Degreaser before

applying the adhesive.• If the threadlocker will be applied below 40°F (5°C), pre-treat with

LOCTITE® 7649 Primer N.• If the parts were in contact with aqueous washing solutions or

cutting fluids that leave a protective layer on the surface, wash with hot water before use.

yeS no

Wicking – green What strength do you require?

low – purple medium – blue high – red

liquid product liquid product liquid product Semi-Solid product liquid product Semi-Solid product


Fastener Size #2 to 1/2" (M2 to M12) up to 1/4" (up to M6) 1/4" to 3/4" (M6 to M20) 1/4" to 3/4" (M6 to M20) up to 1" (up to M25) up to 3/4" (up to M20)

Strength High Low Medium Medium High High

Cure Time (Fixture/Full Strength)* 20 min./24 hr. 10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 10 min./24 hr. 20 min./24 hr.

Breakaway/Prevail Torque lb.in. (N.m) 90/260 (10/29) 53/30 (6/3) 180/62 (20/7) 110/43 (12/4) 275/290 202/4 (22/0.5)

Temperature Resistance for Continuous Service 300°F (150°C) 300°F (150°C) 360°F (180°C) 300°F (150°C) 360°F (180°C) 300°F (150°C)

Package Size & IDH10 ml bottle - 1595016 50 ml bottle - 232085250 ml bottle - 235226


250 ml bottle - 228582

10 ml bottle - 133153750 ml bottle - 1311320250 ml bottle - 1311322

9 g stick - 3777219 g stick - 37773


250 ml bottle - 1307416

9 g stick - 106929719 g stick - 902328

Recommended for locking pre-assembled fasteners, i.e. instrumentation screws, electrical connectors, and set screws. Also seals porosities in welds and metal parts.

Recommended for low strength threadlocking of adjustment screws, countersunk head screws, and set screws; on collars, pulleys, tool holders, and controllers. Also for low strength metals such as aluminum or brass.

With improved oil tolerance, LOCTITE® 243 Threadlocker is effective on all types of metal threaded fasteners. Prevents loosening on vibrating parts such as pump, motor mounting bolts, gear boxes, or presses. Removable with hand tools.

Semi-solid stick form is convenient, portable, and great for hard-to-reach applications. LOCTITE® 248 Threadlocker – Medium Strength is the ideal general–purpose threadlocker for all nut and bolt applications, especially fasteners between 1 ⁄4" and 3 ⁄4" (M6 to M20). Removable with hand tools. Oil tolerance & primerless.

versatile, high strength liquid threadlocker. Reliably locks and seals metal fasteners up to 1". Engineered to cure consistently on a variety of metals, despite minor surface contaminants. Works on steel, stainless steel and most plated fasteners. Tolerates thread lubrication, anti-corrosion and protection fluids. Rated for 360°F (180°C). Heat required for removal.

This convenient semisolid stick form is portable and less messy. Its high strength prevents loosening of threaded fasteners. Well suited for heavy-duty applications. Oil tolerance & primerless.

locT

iTe®

pr

imer

S

Use locTiTe® primer to:1. Activate inactive surfaces.2. Speed cure times for faster return

to service.3. Speed curing through larger gaps

and deep threads.4. Substantially speed cure times on

cold parts.5. Act as a cleaning agent.

Name Color viscosity Base On-Part Life Dry Time Package Size & IDH

primer is optional with:Active surfaces: Brass, copper, bronze, iron, soft steel, nickel.

primer is required with:Inactive surfaces: Aluminum, stainless steel, magnesium, zinc, black oxide, cadmium, titanium, and others.

7649 primer n Clear/Green 2 Acetone 30 days 30 to 70 seconds

1.75 oz. - 1179077100 ml - 555114 4.5 oz. - 475763 500 ml - 487644

7471 primer T Amber 2 Acetone/Isopropanol

7 days 30 to 70 seconds

1.75 oz - 1179078100 ml - 5551044.5 oz. - 555110500 ml - 555112

Maintenance, Repair and Overhaul Solutions Guide | 5

Thread Sealing

» REPLACES TAPES AND PASTES » LIquIDS ENSuRE COMPLETE CONTACT BETWEEN THREADS FOR A 100% SEAL » LIquIDS WILL NOT CREEP, SHRINk, SHRED OR BLOCk SySTEMS (INCLuDING FILTERS) » DISASSEMBLy CAN BE ACHIEvED EASILy WITH BASIC HAND TOOLS

are The parTS meTal or plaSTic?

Helpful Hints:• If the sealant (LOCTITE® 545 Thread Sealant, LOCTITE® 565 PST Thread Sealant, LOCTITE® 567 PST Thread Sealant, or LOCTITE® 561 Pipe Sealant) will be applied below 40°F (5°C), pre-treat with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing - use LOCTITE® ODC-

Free Cleaner and Defreaser.

plaSTic and/or meTal meTal parTS

are the threads fine or coarse?

cord Fine coarse

do you prefer a solid or a liquid? (Solid is ideal for overhead or hard to reach applications)

liquid Semi-Solid


Description Cord Purple Liquid White to off White Paste yellow Paste White Paste White Stick

Maximum Thread Size 4" (10.16 cm) up to 2" (5.08 cm) up to 2" (5.08 cm) up to 2" (5.08 cm) 3" (7.62 cm) 3" (7.62 cm)

Temperature Resistance 300°F (150°C) 300°F (150°C) 300°F (150°C) 265°F (130°C) 400°F (204°C) 300°F (150°C)

Maximum Pressure Resistance (psi)/Cure Time (N/mm2) 10,000 psi/instant (68.9) 10,000 psi/24 hrs. (68.9) 10,000 psi/72 hrs. 10,000 psi/72 hrs. (68.9) 10,000 psi/72 hrs. (68.9) 10,000 psi/72 hrs. (68.9)

Substrate to be Sealed Metal, Plastic or Both Metal Metal Metal Stainless Steel, Aluminum Metal

Instant Low Pressure Seal yes No yes No yes yes

Package Size & IDH

5,700 inches (150 m) - 2701355,700 inches (150 m) - 3421345,700 inches (150 m) - 10612101,968 inches (50 m) - 483282

50 ml bottle - 232095 250 ml tube - 1327769

50 ml tube - 339604250 ml tube - 449139

50 ml tube - 232097250 ml tube - 235280

50 ml tube - 231701250 ml tube - 235608

19 g stick - 463973

Can be safely applied on metal and plastic threaded fittings.Potable water: NSF/ANSI 61 uL Listed and Ceritified to CSA International.

Recommended for fine threadedfittings as used in hydraulic andpneumatic installations and small fittings in general.

A general-purpose instant sealant for tapered and straight/tapered fittings.

Medium strength, generalpurpose sealant for use oncoarse, threaded components.

Withstands temperatures to400°F with excellent solventresistance. Locks and seals tapered pipe threads andfittings, including high pressureapplications. Disassembles withhand tools.

Semi-solid stick form isconvenient, portable, and less messy. Formulated for fast, reliable curing on metal, tapered pipe threads and fittings.LOCTITE® 561 PST Pipe Sealant provides high pressure sealing and withstands continuousoperating temperatures of -65°F to 300°F (-54°C to 150°C).

addiTional prodUcTS

Name Features

locTiTe® 572 Easy application by hand. For use on construction pipe sealing.

locTiTe® 542Medium strengh. The thixotropic nature reduces the migration of liquid product after application to the substrate.

locTiTe® 569 Low strength. Original hydraulic sealant.

locTiTe® 5651 Low strength. Easy application by hand. For use on construction pipe sealing.


are The parTS meTal or plaSTic?

Helpful Hints:• If the sealant (LOCTITE® 545 Thread Sealant, LOCTITE® 565 PST Thread Sealant, LOCTITE® 567 PST Thread Sealant, or LOCTITE® 561 Pipe Sealant) will be applied below 40°F (5°C), pre-treat with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing - use LOCTITE® ODC-

Free Cleaner and Defreaser.

plaSTic and/or meTal meTal parTS

are the threads fine or coarse?

cord Fine coarse

do you prefer a solid or a liquid? (Solid is ideal for overhead or hard to reach applications)

liquid Semi-Solid


Description Cord Purple Liquid White to off White Paste yellow Paste White Paste White Stick

Maximum Thread Size 4" (10.16 cm) up to 2" (5.08 cm) up to 2" (5.08 cm) up to 2" (5.08 cm) 3" (7.62 cm) 3" (7.62 cm)


Maximum Pressure Resistance (psi)/Cure Time (N/mm2) 10,000 psi/instant (68.9) 10,000 psi/24 hrs. (68.9) 10,000 psi/72 hrs. 10,000 psi/72 hrs. (68.9) 10,000 psi/72 hrs. (68.9) 10,000 psi/72 hrs. (68.9)

Substrate to be Sealed Metal, Plastic or Both Metal Metal Metal Stainless Steel, Aluminum Metal

Instant Low Pressure Seal yes No yes No yes yes

Package Size & IDH

5,700 inches (150 m) - 2701355,700 inches (150 m) - 3421345,700 inches (150 m) - 10612101,968 inches (50 m) - 483282

50 ml bottle - 232095 250 ml tube - 1327769

50 ml tube - 339604250 ml tube - 449139

50 ml tube - 232097250 ml tube - 235280

50 ml tube - 231701250 ml tube - 235608

19 g stick - 463973

Can be safely applied on metal and plastic threaded fittings.Potable water: NSF/ANSI 61 uL Listed and Ceritified to CSA International.

Recommended for fine threadedfittings as used in hydraulic andpneumatic installations and small fittings in general.

A general-purpose instant sealant for tapered and straight/tapered fittings.

Medium strength, generalpurpose sealant for use oncoarse, threaded components.

Withstands temperatures to400°F with excellent solventresistance. Locks and seals tapered pipe threads andfittings, including high pressureapplications. Disassembles withhand tools.

Semi-solid stick form isconvenient, portable, and less messy. Formulated for fast, reliable curing on metal, tapered pipe threads and fittings.LOCTITE® 561 PST Pipe Sealant provides high pressure sealing and withstands continuousoperating temperatures of -65°F to 300°F (-54°C to 150°C).


gaSkeTingSealing and Flanges

» NO SHIMMING EFFECT – CONTROLLED TOLERANCES, NO NEED FOR RE-TORquING » FILL ALL vOIDS – REDuCE THE NEED FOR A FINE SuRFACE FINISH OF FLANGES » PARTS CAN BE DISASSEMBLED EASILy EvEN AFTER EXTENDED SERvICE » RESISTS HIGH PRESSuRE WHEN FuLLy CuRED

doeS The exiSTing gaSkeT need To be USed aS a Shim?

Helpful Hints:• If there are traces of old gasket left on the parts to be sealed, clean

with LOCTITE® 790 Chisel Gasket RemoverLOCTITE® 565 PST Thread Sealant, LOCTITE® 567 PST Thread Sealant, or LOCTITE® 561 PST Pipe Sealant will be applied below 40°F (5°C), pre-treat with LOCTITE® 7649 Primer N.

• All parts must be clean and dry before sealing – use LOCTITE® ODC-Free Cleaner and Degreaser.

• Anaerobic products cure between metal surfaces with the absence of air.

no yeS

are you sealing a rigid or a stamped flange?

positioningcut gaskets

rigid Stamped

henkel SolUTionS locTiTe® 518 locTiTe® 510 locTiTe® 587 locTiTe® 596 locTiTe® instant gasket locTiTe® 534

Color Red Pink Blue Red Black Purple

Gasket Type Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place use with cut gasket

Gap Fill 0.010" (0.25 mm) 0.010" (0.25 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) N.A.

Cure Method Anaerobic Anaerobic Moisture (RTv) Moisture (RTv) Moisture (RTv) Anaerobic

Fixture/Cure Time N.A./24 hrs. N.A./24 hrs. 50 min. N.A./50 min. 5 min. N.A.

Temperature Resistance(Continuous/Intermittent)

300°F (150°C)/N.A. 400°F (204°C)/N.A.400°F (204°C)482°F (250°C)

600°F (316°C)450°F (232°C)482°F (250°C)

300°F (150°C)/N.A.

Instant Seal Excellent Excellent Excellent Excellent Excellent Excellent

Water/Glycol Resistance Excellent Excellent Excellent N.A. Excellent N.A.

Package Size & IDH50 ml tube - 231697

300 ml cart. - 235269

50 ml tube - 235255300 ml cart. - 231352850 ml cart. - 939535

85 g tube - 231482370 g cart. - 576854

85 g tube - 74306585 g tube - 778136

90 ml - 743912190 ml - 743913

19 g stick - 73174919 g stick - 64080419 g stick - 933726

Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTITE® 7649 Primer Non only one surface.

High temperature. Product hasa temperature range to 400°F(204°C) with excellent solventand chemical resistance. Makesor dresses gaskets in rigidassemblies. Eliminates gasketcompression set.

All types of flanges includingstamped sheet metal. Designedfor superior bonding propertiesto oil contaminated metals.

High temperature siliconesealant makes the repair ofindustrial furnaces, ovens,boilers, exhaust stacks, hightemperature stacks, ductingand heating elements.

Makes high-performance, leakproof gaskets in one minute. Equipment can be returned to service immediately. Blowoutresistant. Outperforms precut gaskets.

No mess semi-solid formulaoffers added control and ease ofuse. Patented package isportable and won’t leak or spill.Seals and holds the heaviestgaskets in place duringassembly. Solvent-free and lowodor. Suitable to 300°F (150°C).

addiTional prodUcTS

Name Features

locTiTe® 515 gasket eliminator Flange Sealant

For flexible applications. Cure speed: unprimed - 1 to 12 hours.Primed - 15 minutes to 2 hours.


For flexible applications, high elongation. unprimed - 4 to 24 hours. Primed - 1 to 24 hours.


Fast curing, large gaps. unprimed - 1 to 12 hours. Primed - 15 minutes to 2 hours.

locTiTe® 790 chisel gasket remover

Solvent. Dry time: Leave on surface for 5 to 10 minutes. Wipe/scrape clean.


doeS The exiSTing gaSkeT need To be USed aS a Shim?

Helpful Hints:• If there are traces of old gasket left on the parts to be sealed, clean

with LOCTITE® 790 Chisel Gasket RemoverLOCTITE® 565 PST Thread Sealant, LOCTITE® 567 PST Thread Sealant, or LOCTITE® 561 PST Pipe Sealant will be applied below 40°F (5°C), pre-treat with LOCTITE® 7649 Primer N.

• All parts must be clean and dry before sealing – use LOCTITE® ODC-Free Cleaner and Degreaser.

• Anaerobic products cure between metal surfaces with the absence of air.

no yeS

are you sealing a rigid or a stamped flange?

positioningcut gaskets

rigid Stamped

henkel SolUTionS locTiTe® 518 locTiTe® 510 locTiTe® 587 locTiTe® 596 locTiTe® instant gasket locTiTe® 534

Color Red Pink Blue Red Black Purple

Gasket Type Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place use with cut gasket

Gap Fill 0.010" (0.25 mm) 0.010" (0.25 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) 0.250" (6.35 mm) N.A.

Cure Method Anaerobic Anaerobic Moisture (RTv) Moisture (RTv) Moisture (RTv) Anaerobic

Fixture/Cure Time N.A./24 hrs. N.A./24 hrs. 50 min. N.A./50 min. 5 min. N.A.

Temperature Resistance(Continuous/Intermittent)

300°F (150°C)/N.A. 400°F (204°C)/N.A.400°F (204°C)482°F (250°C)

600°F (316°C)450°F (232°C)482°F (250°C)

300°F (150°C)/N.A.

Instant Seal Excellent Excellent Excellent Excellent Excellent Excellent

Water/Glycol Resistance Excellent Excellent Excellent N.A. Excellent N.A.

Package Size & IDH50 ml tube - 231697

300 ml cart. - 235269

50 ml tube - 235255300 ml cart. - 231352850 ml cart. - 939535

85 g tube - 231482370 g cart. - 576854

85 g tube - 74306585 g tube - 778136

90 ml - 743912190 ml - 743913

19 g stick - 73174919 g stick - 64080419 g stick - 933726

Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTITE® 7649 Primer Non only one surface.

High temperature. Product hasa temperature range to 400°F(204°C) with excellent solventand chemical resistance. Makesor dresses gaskets in rigidassemblies. Eliminates gasketcompression set.

All types of flanges includingstamped sheet metal. Designedfor superior bonding propertiesto oil contaminated metals.

High temperature siliconesealant makes the repair ofindustrial furnaces, ovens,boilers, exhaust stacks, hightemperature stacks, ductingand heating elements.

Makes high-performance, leakproof gaskets in one minute. Equipment can be returned to service immediately. Blowoutresistant. Outperforms precut gaskets.

No mess semi-solid formulaoffers added control and ease ofuse. Patented package isportable and won’t leak or spill.Seals and holds the heaviestgaskets in place duringassembly. Solvent-free and lowodor. Suitable to 300°F (150°C).


reTainingSecuring Cylindrical Assemblies

» BOND NON-THREADED CyLINDRICAL METAL ASSEMBLIES » HIGH AND MODERATE STRENGTH PRODuCTS – CAN CARRy HIGH LOADS AND ELIMINATE FRETTING » FILL ALL vOIDS – PREvENT CORROSION » REDuCE THE NEED FOR CLOSE TOLERANCES » 100% CONTACT – LOAD AND STRESS ARE DISTRIBuTED EvENLy OvER THE jOINT

iS The aSSembly badly Worn?

Helpful Hints:• If the retaining compound will be applied below 40°F (5°C), pre-treat

with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing – use LOCTITE® ODC-

Free Cleaner and Degreaser.• If the parts have been in contact with washing or cutting fluids

containing nitrates, wash with hot water.

yeS - gapS Up To 0.020" (0.5 mm) no - gapS To 0.015" (0.4 mm)

do you require low, medium or high strength?

low Strength medium Strength high Stength

do you require a high viscosity (slower flowing) or a low viscosity (faster flowing) product?

high Viscosity low Viscosity


Strength Required High Low Medium Medium High High

Shear Strength (N/mm2) 3,335 psi (23) 1,700 psi (11.7) 2,300 psi (15.8) 1,870 psi (12.8) 4,200 psi (29) 4,480 psi (31)

Diametrical Clearance up to 0.020" (0.5 mm) up to 0.006'' (0.15 mm) up to 0.005" (0.1 mm) up to 0.005" (0.1 mm) up to 0.01" (0.25 mm) up to 0.006" (0.15 mm)


Cure Time (Setup/Full Strength) 20 min./24 hr. 20 min./24 hr. 10 min./24 hr. 30 min./24 hr. 15 min./24 hr. 10 min./24 hr.

Package Size & IDH 50 ml tube - 23169950 ml bottle - 387885


50 ml bottle - 232100 250 ml bottle - 235286250 ml bottle - 30998

19 g stick - 64047050 ml bottle - 1800356250 ml bottle - 1800355


used for repairing worn coaxial parts without remachining; enables reuse of worn bearing seats, keys, splines, tapers, or for retaining shims.

A controlled strength retaining compound that is ideal for cylindrical parts that requiredisassembly.

Recommended for partsthat will need subsequentdismantling, i.e. retention of bearings onto shafts and into housings.

A high temperature retaining compound in a revolutionary semi-solid formula. Patented,no-mess package offers added convenience and portability. Ideal for gaps up to 0.005" (0.1 mm) on the diameter. Withstands temperatures to 400°F (204°C).

Maximum strength. For use where high dynamic force or cyclic loading is expected. Offers high temperature performanceand oil tolerance.

Press Fit/High Strength/Rapid Cure. Offers high temperature performance and oil tolerance.

addiTional prodUcTS

Name Features

locTiTe® 680Gives best resistance to dynamic, axial and radialloads. Recommended for retaining shafts, gears,pulleys, and similar cylindrical parts.

locTiTe® 620

Particularly suitable for applications where temperature resistance up to 200°C is required. Requires heat cure to achieve temperature resistance.

locTiTe® 603For close-fitting parts with light contamination. Typical applications include retaining roller bearings or oil impregnated bushings into housings.

* Requires heat cure to achieve temperature resistance


iS The aSSembly badly Worn?

Helpful Hints:• If the retaining compound will be applied below 40°F (5°C), pre-treat

with LOCTITE® 7649 Primer N.• All parts must be clean and dry before sealing – use LOCTITE® ODC-

Free Cleaner and Degreaser.• If the parts have been in contact with washing or cutting fluids

containing nitrates, wash with hot water.

yeS - gapS Up To 0.020" (0.5 mm) no - gapS To 0.015" (0.4 mm)

do you require low, medium or high strength?

low Strength medium Strength high Stength

do you require a high viscosity (slower flowing) or a low viscosity (faster flowing) product?

high Viscosity low Viscosity


Strength Required High Low Medium Medium High High

Shear Strength (N/mm2) 3,335 psi (23) 1,700 psi (11.7) 2,300 psi (15.8) 1,870 psi (12.8) 4,200 psi (29) 4,480 psi (31)

Diametrical Clearance up to 0.020" (0.5 mm) up to 0.006'' (0.15 mm) up to 0.005" (0.1 mm) up to 0.005" (0.1 mm) up to 0.01" (0.25 mm) up to 0.006" (0.15 mm)


Cure Time (Setup/Full Strength) 20 min./24 hr. 20 min./24 hr. 10 min./24 hr. 30 min./24 hr. 15 min./24 hr. 10 min./24 hr.

Package Size & IDH 50 ml tube - 23169950 ml bottle - 387885


50 ml bottle - 232100 250 ml bottle - 235286250 ml bottle - 30998

19 g stick - 64047050 ml bottle - 1800356250 ml bottle - 1800355


used for repairing worn coaxial parts without remachining; enables reuse of worn bearing seats, keys, splines, tapers, or for retaining shims.

A controlled strength retaining compound that is ideal for cylindrical parts that requiredisassembly.

Recommended for partsthat will need subsequentdismantling, i.e. retention of bearings onto shafts and into housings.

A high temperature retaining compound in a revolutionary semi-solid formula. Patented,no-mess package offers added convenience and portability. Ideal for gaps up to 0.005" (0.1 mm) on the diameter. Withstands temperatures to 400°F (204°C).

Maximum strength. For use where high dynamic force or cyclic loading is expected. Offers high temperature performanceand oil tolerance.

Press Fit/High Strength/Rapid Cure. Offers high temperature performance and oil tolerance.


inSTanT bonding » ASSEMBLE PARTS quICkLy AND EASILy » PEPAIR BROkEN PARTS » BOND DISSIMILAR PARTS

WhaT maTerial are yoU bonding?

plaSTic or meTal rUbber

do you require impact resistance ?

yes no

henkel SolUTionS locTiTe® 435 prism instant adhesive

locTiTe® 480 prism instant adhesive

locTiTe® 380 black max instant adhesive

locTiTe® 454 prisminstant adhesive


locTiTe® 404 Quick Set instant adhesive

Color Clear Black Black Clear Clear Clear

Fixture Time 30 sec. 50 sec. 90 - 150 sec. 15 - 90 sec. 15 sec. 20 - 40 sec.

Temperature Resistance up to 240°F (82°C) up to 225°F (107°C) up to 225°F (107°C) up to 250°F (120°C) up to 250°F (120°C) up to 180°F (82°C)

viscosity (cP) 175 200 300 Gel 90 80

Package Size & IDH20 g bottle - 8400571 lb. bottle - 840071

20 g tube - 85226950 g bottle - 1066833

500 g bottle - 10192641 oz. bottle - 135423

20 g - 135462300 g - 88525

3 g - 25035620 g - 23147250 g - 250357

500 g - 235144

1/3 oz. bottle - 1354654 oz. bottle - 234044

LOCTITE® 435 Prism Instant Adhesive has good impact resistance and a fast cure time on a wide variety of meterials. This product has good chemical and humidity resistance. Excellent for rubber-to-rubber, rubber-to-metal, meta-to-metal and plastic-to-plastic bonds.

Low viscosity elastomer-modified instant adhesive. Bonds metals and rubbers. Excellent peel, impact and shear strenght. NSF/ANSI 61 Certified for potable water.

For parts that encounter shock, vibration or thermal cycling, LOCTITE® 380 Black Max InstantAdhesive is the instant adhesive choice. This black, toughenedcyanoacrylate adhesive uses elastomers to withstand impact and challenging environmentalconditions. Seals as well as bonds. Works especially well bonding rubber to metal.

The ideal adhesive for porous substrates, LOCTITE® 454 PrismInstant Adhesive is a clear gel. As a surface insensitive cyanoacylate, it is ideal for difficult-to-bond substrates, including rough, porous and acidic surfaces. Need to bond something on a vertical surface?This gel formulation won’t run off before you put substrates together. ABS Approved.

A general purpose adhesive for difficult-to-bond surfaces.

This general-purpose instant adhesive liquid is the one adhesive everyone needs in theirtoolbox for general maintenance and repair. It sets instantly. Noclamping, no mixing, no waiting. keep it handy to bond just about anything in an instant. Bondsrubber to rubber, i.e.making o-rings. ABS Approved.

addiTional prodUcTS

Name Features

locTiTe® black contact adhesive

Flexible, resists gasoline, waterproof

locTiTe® contact adhesive Flexible, withstands freezing temperature

locTiTe® all purpose Spray adhesive

Water resistant spray

locTiTe® maximum Strength headline adhesive

Resists extreme weather conditions


WhaT maTerial are yoU bonding?

plaSTic or meTal rUbber

do you require impact resistance ?

yes no

henkel SolUTionS locTiTe® 435 prism instant adhesive

locTiTe® 480 prism instant adhesive

locTiTe® 380 black max instant adhesive



locTiTe® 404 Quick Set instant adhesive

Color Clear Black Black Clear Clear Clear

Fixture Time 30 sec. 50 sec. 90 - 150 sec. 15 - 90 sec. 15 sec. 20 - 40 sec.


viscosity (cP) 175 200 300 Gel 90 80

Package Size & IDH20 g bottle - 8400571 lb. bottle - 840071

20 g tube - 85226950 g bottle - 1066833

500 g bottle - 10192641 oz. bottle - 135423

20 g - 135462300 g - 88525

3 g - 25035620 g - 23147250 g - 250357

500 g - 235144

1/3 oz. bottle - 1354654 oz. bottle - 234044

LOCTITE® 435 Prism Instant Adhesive has good impact resistance and a fast cure time on a wide variety of meterials. This product has good chemical and humidity resistance. Excellent for rubber-to-rubber, rubber-to-metal, meta-to-metal and plastic-to-plastic bonds.

Low viscosity elastomer-modified instant adhesive. Bonds metals and rubbers. Excellent peel, impact and shear strenght. NSF/ANSI 61 Certified for potable water.

For parts that encounter shock, vibration or thermal cycling, LOCTITE® 380 Black Max InstantAdhesive is the instant adhesive choice. This black, toughenedcyanoacrylate adhesive uses elastomers to withstand impact and challenging environmentalconditions. Seals as well as bonds. Works especially well bonding rubber to metal.

The ideal adhesive for porous substrates, LOCTITE® 454 PrismInstant Adhesive is a clear gel. As a surface insensitive cyanoacylate, it is ideal for difficult-to-bond substrates, including rough, porous and acidic surfaces. Need to bond something on a vertical surface?This gel formulation won’t run off before you put substrates together. ABS Approved.

A general purpose adhesive for difficult-to-bond surfaces.

This general-purpose instant adhesive liquid is the one adhesive everyone needs in theirtoolbox for general maintenance and repair. It sets instantly. Noclamping, no mixing, no waiting. keep it handy to bond just about anything in an instant. Bondsrubber to rubber, i.e.making o-rings. ABS Approved.


STrUcTUral bonding

machinable mUlTiple SUrFace conSTrUcTion adheSiVeS

henkel SolUTionS locTiTe® Fixmaster Fast cure epoxy – mixer cups

locTiTe® Fixmaster poxy pak – Fast cure epoxy

locTiTe® e-120hp hysol epoxy adhesive

locTiTe® 330depend adhesive

locTiTe® 331Structural adhesive

locTiTe® power grad industrial construction

adhesive

Color Grey Clear Amber Amber Amber Off-White

Fixture Time 10 min. 4 - 6 min. 8 hrs. 1 - 2 min. 30 sec. 20 min.


Package Size & IDH10 - 0.12 fl. oz. cups - 209717

10 - 1 oz. cups - 209718 4 pack 0.12 fl. oz. cups - 631604

1 oz. syringe - 23528150 ml syringe - 237128

200 ml syringe - 237129400 ml dual syringe - 237130

25 ml syringe - 1690727 25 ml syringe - 1057673

300 ml cart. - 1210760825 ml cart. - 1210759

190 ml pressurized can - 1348376

Premeasured epoxy mixer cups. Bonds in 5 - 15 minutes. Excellent chemical resistance. Fills porosities and can beused to build up worn parts. Ideal for bonding glass, hard plastics, rubber, and metal.

This fast-cure, highstrength, thick liquid reaches handling strength in 4-6 minutes.Bonds virtually any material to repair, fill and seal holes, cracks, and worn surfaces. ABS Approved.

ultra Strength. An amber,non-sag, aerospace gradeepoxy with a 120-minuteworklife. Suitable forapplications require highimpact and high peelstrength. Bonds dissimilar materials including aluminum, steel, and other metals, as well as a variety of plastics & ceramics.

LOCTITE® 330 DependAdhesive sets in justminutes to a tough acrylic adhesive with high peel and impact strength. Bonds almost all combinations of materials, including glass. No-mix kit includes activator and adhesive.

Single-component, toughened, activator cure acrylic. No mixing, no measuring, no mess and minimal clamping. Sets in 20 seconds and develops full strength in 30 minutes for quicker return to service. Excellent temperature resistance; acid-free and non-corrosive. Ideal for bonding close-fitting parts. Amber in color.

Single-component adhesive for interior and exterior repairs or building projects. Holds instantly, elimintating the need for bracing and nailing. Bonds to most construction materials, such as metal, ceramic, wood, concrete and most plastics. One surface must be porous.

STrUcTUral bonding

» ELIMINATES OR SIGNIFICANTLy REDuCES COSTLy MECHANICAL FASTENING METHODS SuCH AS RIvETS, SCREWS AND WELDS

» IDEAL FOR quICk REPAIRS AND STRuCTuRAL ASSEMBLIES » EXCELLENT RESISTANCE TO SEvERE ENvIRONMENTAL CONDITIONS » BONDS DISSIMILAR MATERIALS, SuCH AS METAL TO PLASTIC » FILLS LARGE GAPS BETWEEN PARTS

addiTional prodUcTS

Name Features

locTiTe® Fixmaster 4 minute epoxy Translucent, fast curing


STrUcTUral bonding

machinable mUlTiple SUrFace conSTrUcTion adheSiVeS

henkel SolUTionS locTiTe® Fixmaster Fast cure epoxy – mixer cups

locTiTe® Fixmaster poxy pak – Fast cure epoxy

locTiTe® e-120hp hysol epoxy adhesive

locTiTe® 330depend adhesive

locTiTe® 331Structural adhesive

locTiTe® power grad industrial construction

adhesive

Color Grey Clear Amber Amber Amber Off-White

Fixture Time 10 min. 4 - 6 min. 8 hrs. 1 - 2 min. 30 sec. 20 min.


Package Size & IDH10 - 0.12 fl. oz. cups - 209717

10 - 1 oz. cups - 209718 4 pack 0.12 fl. oz. cups - 631604

1 oz. syringe - 23528150 ml syringe - 237128

200 ml syringe - 237129400 ml dual syringe - 237130

25 ml syringe - 1690727 25 ml syringe - 1057673

300 ml cart. - 1210760825 ml cart. - 1210759

190 ml pressurized can - 1348376

Premeasured epoxy mixer cups. Bonds in 5 - 15 minutes. Excellent chemical resistance. Fills porosities and can beused to build up worn parts. Ideal for bonding glass, hard plastics, rubber, and metal.

This fast-cure, highstrength, thick liquid reaches handling strength in 4-6 minutes.Bonds virtually any material to repair, fill and seal holes, cracks, and worn surfaces. ABS Approved.

ultra Strength. An amber,non-sag, aerospace gradeepoxy with a 120-minuteworklife. Suitable forapplications require highimpact and high peelstrength. Bonds dissimilar materials including aluminum, steel, and other metals, as well as a variety of plastics & ceramics.

LOCTITE® 330 DependAdhesive sets in justminutes to a tough acrylic adhesive with high peel and impact strength. Bonds almost all combinations of materials, including glass. No-mix kit includes activator and adhesive.

Single-component, toughened, activator cure acrylic. No mixing, no measuring, no mess and minimal clamping. Sets in 20 seconds and develops full strength in 30 minutes for quicker return to service. Excellent temperature resistance; acid-free and non-corrosive. Ideal for bonding close-fitting parts. Amber in color.

Single-component adhesive for interior and exterior repairs or building projects. Holds instantly, elimintating the need for bracing and nailing. Bonds to most construction materials, such as metal, ceramic, wood, concrete and most plastics. One surface must be porous.


Flexible bonding and Sealing

» BOND AND SEAL PARTS THAT EXPERIENCE MOvEMENT, SuCH AS vIBRATION, IMPACT, THERMO EXPANSION/CONTRACTION, ETC

» SuITED FOR INDOOR AND OuTDOOR APPLICATIONS THAT REquIRE RESISTANCE TO HEAT, HuMIDITy, TEMPERATuRE SWINGS AND uv LIGHT

are yoU bonding or Sealing?

bonding Sealing

do you need a high temp product? What temp resistance do you require?

yes no low medium high

henkel SolUTionSlocTiTe® Tile bond red, high Temp rTV Silicone

adhesive Sealant

locTiTe® 5570adhesive

locTiTe® Superflex high Temp rTV Siliconeadhesive Sealant

locTiTe® Superflex rTV Silicone

adhesive Sealant

locTiTe® Superflex red high Temp rTV Siliconeadhesive Sealant

Color Red White Clear, White White, Clear, Black Red

Cure Time (Tack-Free/Full Cure) 30 min./24hrs. 30 min./24hrs. 8 min./24hrs. 30 min./24hrs. 30 min./24hrs.

Temperature Resistance up to 600°F (316°C) up to 200°F (93°C) up to 250°F (121°C) up to 450°F (232°C) up to 600°F (316°C)

Package Size & IDH Red 300 ml cart. - 19163 White 300 ml cart. - 1073348White 300 ml cart. - 1312042Clear 300 ml cart. - 1311327

White 80 ml tube - 59430White 190 ml can - 40466White 300 ml cart. - 59475Clear 80 ml tube - 59530Clear 190 ml can - 40481Clear 300 ml cart. - 59575Black 80 ml tube - 59330Black 190 ml can - 40464Black 300 ml cart. - 59375

80 ml tube - 59630190 ml can - 40465300ml cart. - 59675

High initial tack strength silicone that resists temperatures to 600°F (316°C) intermittent.

A strong bonding adhesive based on Flextec Technology suitable for many adhesive and sealant applications. It offers a fast skin time and cures to a tack-free surface.

A one-component, fast-dry RTv silicone that withstands water contact just 2 hours after application. This 100% silicone rubber sealant replaces traditional sealants that require a minmum 24 hours prior to water exposure. Resistant to mold and mildew, this product features a flexible, watertight seal that provides a time-saving. Back-in-service option.

This general-purpose, one-part silicone adhesive sealant cures at room temperature to form a tough rubber seal. Will not slump in overhead or vertical applications. Formulatred to withstand extreme temperature cycling. uv light and ozone.

Resists intermittent temperatures to 600°F (316°C). One-part silicone adhesive sealant that cures at room temperature.


are yoU bonding or Sealing?

bonding Sealing

do you need a high temp product? What temp resistance do you require?

yes no low medium high

henkel SolUTionSlocTiTe® Tile bond red, high Temp rTV Silicone

adhesive Sealant

locTiTe® 5570adhesive

locTiTe® Superflex high Temp rTV Siliconeadhesive Sealant

locTiTe® Superflex rTV Silicone

adhesive Sealant

locTiTe® Superflex red high Temp rTV Siliconeadhesive Sealant

Color Red White Clear, White White, Clear, Black Red

Cure Time (Tack-Free/Full Cure) 30 min./24hrs. 30 min./24hrs. 8 min./24hrs. 30 min./24hrs. 30 min./24hrs.

Temperature Resistance up to 600°F (316°C) up to 200°F (93°C) up to 250°F (121°C) up to 450°F (232°C) up to 600°F (316°C)

Package Size & IDH Red 300 ml cart. - 19163 White 300 ml cart. - 1073348White 300 ml cart. - 1312042Clear 300 ml cart. - 1311327

White 80 ml tube - 59430White 190 ml can - 40466White 300 ml cart. - 59475Clear 80 ml tube - 59530Clear 190 ml can - 40481Clear 300 ml cart. - 59575Black 80 ml tube - 59330Black 190 ml can - 40464Black 300 ml cart. - 59375

80 ml tube - 59630190 ml can - 40465300ml cart. - 59675

High initial tack strength silicone that resists temperatures to 600°F (316°C) intermittent.

A strong bonding adhesive based on Flextec Technology suitable for many adhesive and sealant applications. It offers a fast skin time and cures to a tack-free surface.

A one-component, fast-dry RTv silicone that withstands water contact just 2 hours after application. This 100% silicone rubber sealant replaces traditional sealants that require a minmum 24 hours prior to water exposure. Resistant to mold and mildew, this product features a flexible, watertight seal that provides a time-saving. Back-in-service option.

This general-purpose, one-part silicone adhesive sealant cures at room temperature to form a tough rubber seal. Will not slump in overhead or vertical applications. Formulatred to withstand extreme temperature cycling. uv light and ozone.

Resists intermittent temperatures to 600°F (316°C). One-part silicone adhesive sealant that cures at room temperature.


meTal repair SySTem

» HIGH COMPRESSIvE STRENGTH » CHOICE OF MILD STEEL ALuMINuM OR NON-METALLIC FILLERS » CAN BE MACHINED, DRILLED, OR TAPPED AFTER CuRE » EXCELLENT RESISTANCE TO AGGRESSIvE CHEMICALS

WhaT meTal are yoU repairing?

alUminUm mild STeel

pourable putty pourable putty putty kneadable stickhigh performance

chemical resistance

henkel SolUTionS locTiTe® Fixmasteraluminum liquid

locTiTe® Fixmasteraluminum putty

locTiTe® FixmasterSteel liquid

locTiTe® FixmasterSteel putty

locTiTe® FixmasterFast Set Steel putty

locTiTe® Fixmastermetal magic Steel

locTiTe® FixmasterSuperior metal putty

Color Light Grey Light Grey Grey Grey Grey Dark Grey Grey

Maximum Temperature 200°F (93°C) 200°F (93°C) 225°F (107°C) 225°F (107°C) 200°F (93°C) 250°F (121°C) 250°F (121°C)

Working Time* 20 min. 20 min. 25 min. 30 min. 3 min. 3 min. 20 min.

Cure Time* 6 hrs. 6 hrs. 6 hrs. 6 hrs. 10 min. 10 min. 6 hrs.

Compressive Strength psi (N/mm2) 17,000 psi (117.3) 11,300 psi (77.9) 13,500 psi (93.1) 11,100 psi (76.6) 10,800 psi (74.5) 12,000 psi (82.7) 18,000 psi (124.1)

Package Size & IDH 1 lb. kit - 235614 1 lb. kit - 2356151 lb. kit - 2356174 lb. kit - 235618

1 lb. kit - 2192924 lb. kit - 23564225 lb. kit - 235641

1 lb. kit - 235641 4 oz. stick - 2096811 lb. kit - 2098224 kg kit - 831721

Fluid, self-leveling aluminum liquid. Can be poured into molds and cavities. Recommended for casting aluminum replacement partsand for making molds.ABS Approved.

Aluminum PuttyGeneral purpose, aluminum putty for repair of all aluminum alloy components. ABS Approved.

High steel content. Pourable liquid filler used for making fixtures and molding. ABS Approved.

High steel content putty.Recommended for repairing and rebuilding worn steel components, such as bearing and fan housings. ABS Approved.

A fast curing version ofsteel putty. Recommended for repairing pipes and otheremergency repairs. ABS Approved.

kneadable two-part paste. Working time is 3 minutes – sets in 10 minutes. Adheres to damp surfaces. Can be drilled, filed, and painted. Ideal for emergency sealing of leaking tanks and pipes. Smoothes welds, repairs small cracks in castings, and fills oversized bolt holes.

Formulated with fine alloy particles with high compressive strength and chemical resistance. Recommended for use on all metals. Outstanding compressive strength, chemical resistance, non-rusting.

addiTional prodUcTS

Name Features

locTiTe® FixmasterWet Surface repair putty

Two component epoxy. Adhere to damp and underwater surfaces. It adheres to steel, iron, aluminum, brass, bronze, concrete, wood and some plastics, even when wet.

locTiTe® FixmasterUnderwater repair epoxy

Putty-like material, unaffected by chlorinated or salt water. Will stick to wet surfaces. Ideally suited for underwater repairs. Sets in 15 minutes.

* At 77°F (25°C)


WhaT meTal are yoU repairing?

alUminUm mild STeel

pourable putty pourable putty putty kneadable stickhigh performance

chemical resistance

henkel SolUTionS locTiTe® Fixmasteraluminum liquid

locTiTe® Fixmasteraluminum putty

locTiTe® FixmasterSteel liquid

locTiTe® FixmasterSteel putty

locTiTe® FixmasterFast Set Steel putty

locTiTe® Fixmastermetal magic Steel

locTiTe® FixmasterSuperior metal putty

Color Light Grey Light Grey Grey Grey Grey Dark Grey Grey

Maximum Temperature 200°F (93°C) 200°F (93°C) 225°F (107°C) 225°F (107°C) 200°F (93°C) 250°F (121°C) 250°F (121°C)

Working Time* 20 min. 20 min. 25 min. 30 min. 3 min. 3 min. 20 min.

Cure Time* 6 hrs. 6 hrs. 6 hrs. 6 hrs. 10 min. 10 min. 6 hrs.

Compressive Strength psi (N/mm2) 17,000 psi (117.3) 11,300 psi (77.9) 13,500 psi (93.1) 11,100 psi (76.6) 10,800 psi (74.5) 12,000 psi (82.7) 18,000 psi (124.1)

Package Size & IDH 1 lb. kit - 235614 1 lb. kit - 2356151 lb. kit - 2356174 lb. kit - 235618

1 lb. kit - 2192924 lb. kit - 23564225 lb. kit - 235641

1 lb. kit - 235641 4 oz. stick - 2096811 lb. kit - 2098224 kg kit - 831721

Fluid, self-leveling aluminum liquid. Can be poured into molds and cavities. Recommended for casting aluminum replacement partsand for making molds.ABS Approved.

Aluminum PuttyGeneral purpose, aluminum putty for repair of all aluminum alloy components. ABS Approved.

High steel content. Pourable liquid filler used for making fixtures and molding. ABS Approved.

High steel content putty.Recommended for repairing and rebuilding worn steel components, such as bearing and fan housings. ABS Approved.

A fast curing version ofsteel putty. Recommended for repairing pipes and otheremergency repairs. ABS Approved.

kneadable two-part paste. Working time is 3 minutes – sets in 10 minutes. Adheres to damp surfaces. Can be drilled, filed, and painted. Ideal for emergency sealing of leaking tanks and pipes. Smoothes welds, repairs small cracks in castings, and fills oversized bolt holes.

Formulated with fine alloy particles with high compressive strength and chemical resistance. Recommended for use on all metals. Outstanding compressive strength, chemical resistance, non-rusting.


Floor and concreTe repair

» CHEMICAL AND CORROSION RESISTANCE » HIGH IMPACT RESISTANCE » BOND TO CONCRETE, WOOD, METALS, BRICk AND OTHER COMMON BuILDING MATERIALS

general concreTe or Fllor repairS ?

Helpful Hints:• Vary consistency of LOCTITE® Fixmaster Magna-Crete for vertical applications.• Use LOCTITE® Fixmaster Magna-Crete for cold storage applications.• No concrete bonding agents are required.• Use a backer rod when filling deep expansion joints.• Use LOCTITE® Fixmaster Fast Set Grout to set anchor bolts.• Replace traditional steel chocks with LOCTITE® Fixmaster Marine Chocking for

mounting equipment in the marine industry.

general concreTe repairS Floor repairS

crack Filler Small concrete repairsFast cure concrete and

Floor repairsgeneral Floor repairs extreme chemical resistance

Vertical application horizontal applicationhigh compressive

Strength

rebuilding and resurfacing damaged

concrete

concrete coating (horiz. or Vert.

Surfaces)

henkel SolUTionS locTiTe® Fixmastercrack Filler nS

locTiTe® Fixmastercrack Filler Sl

locTiTe® Fixmasterconcrete

repair epoxy

locTiTe® Fixmastermagna-crete

locTiTe® FixmasterFloor Fill

locTiTe® Fixmasterhigh performance

Quartz

locTiTe® nordbakchemical resistant

coating

Color Grey Grey Grey Grey Grey Grey Grey

Maximum Temperature 135˚F (57˚C) 120˚F (49˚C) 250˚F (121˚C) 2,000˚F (1,093˚C) 225˚F (107˚C) 150˚F (66˚C) 150°F (66°C)

Compressive Strength (N/mm2) 9,800 psi 9,800 psi 12,000 psi (82.7) 13,000 psi (89.6) 15,000 psi (103.4) 12,000 psi (82.7) 10,000 psi

Working Time 8 min. 3 - 6 min. 4 - 7 min. 15 min. 40 - 60 min. 45 min. 20 min.

Functional Cure 2 hrs. 90 min. 1 hr. 1 hr. 24 hrs. 24 hrs. 16 hrs

Chemical Resistance Good Good Good Fair Good Excellent Excellent

Package Size & IDH8.6 fl. oz. coaxial cart. - 1108886

8.6 fl. oz. coaxial cart. - 1291113

4 oz. stick - 393661 gal. kit - 2355725 gal. kit - 235573

10 lb. kit - 23563240 lb. kit - 235633

42 lb. kit - 209669 12 lb. kit - 209816

Non-drip, non-sag formula will repair holes, spalls and cracks in concrete, brick, block, and masonry on horizontal or vertical surfaces. This two part, rapid curing, high strength epox will not soften over time, amd can be used indoors or outdoors.

Two-component, self-leveling, flexible formula in coaxial cartridge. Can be used indoor or outdoors. Bonds concrete, block, brick, stone, wood and metal.

Enables permanent repairs to concrete and masonry. Convenient stick contains pre-measured portions of activator and base. Once cured can be tapped, drilled, screwed, sawed, filed or painted, and will have an appearance and texture similar to concrete.

This two-componentmagnesium phosphatecement sets rapidly andhas a very high earlystrength. Ideal for road and aircraft runway repairs, which can typically be driven over after 45 minutes. It bonds to new and old concrete as well as most construction materials including wood, glass, and steel. No water additive, so it can be applied at temperatures as low as -15°F (-26°C).

A three-component,self-leveling, non-shrinking epoxy floor repair system. 100% solids, epoxy-based system for repairing holes in floors, spalled areas, ramps, stairs, cracks in floors, and for use in grouting applications. Stronger than concrete, it bonds to almost any clean substrate and provides corrosion and chemical resistance.

A highly-filled, quartz epoxy system designed to protect old or new concrete from chemical attack. Provides a surface resistant to concentrated acids, alkalis, and solvents. Areas damaged by chemical attack may be resurfaced with HPq. Easily applied, trowelable system that should be applied at a minimumbuild to provide maximum chemical resistance. 1/4" (6.35 mm).

Smooth, glossy, lowfriction finish protectsagainst turbulence,abrasion, and cavitation. This advanced epoxyprotects equipment from extreme chemical attackand corrosion. Lowviscosity epoxy can be applied by brush.

addiTional prodUcTS

Name Color

locTiTe® Fixmaster Fast Set grout

Red


general concreTe or Fllor repairS ?

Helpful Hints:• Vary consistency of LOCTITE® Fixmaster Magna-Crete for vertical applications.• Use LOCTITE® Fixmaster Magna-Crete for cold storage applications.• No concrete bonding agents are required.• Use a backer rod when filling deep expansion joints.• Use LOCTITE® Fixmaster Fast Set Grout to set anchor bolts.• Replace traditional steel chocks with LOCTITE® Fixmaster Marine Chocking for

mounting equipment in the marine industry.

general concreTe repairS Floor repairS

crack Filler Small concrete repairsFast cure concrete and

Floor repairsgeneral Floor repairs extreme chemical resistance

Vertical application horizontal applicationhigh compressive

Strength

rebuilding and resurfacing damaged

concrete

concrete coating (horiz. or Vert.

Surfaces)

henkel SolUTionS locTiTe® Fixmastercrack Filler nS

locTiTe® Fixmastercrack Filler Sl

locTiTe® Fixmasterconcrete

repair epoxy

locTiTe® Fixmastermagna-crete

locTiTe® FixmasterFloor Fill

locTiTe® Fixmasterhigh performance

Quartz

locTiTe® nordbakchemical resistant

coating

Color Grey Grey Grey Grey Grey Grey Grey

Maximum Temperature 135˚F (57˚C) 120˚F (49˚C) 250˚F (121˚C) 2,000˚F (1,093˚C) 225˚F (107˚C) 150˚F (66˚C) 150°F (66°C)

Compressive Strength (N/mm2) 9,800 psi 9,800 psi 12,000 psi (82.7) 13,000 psi (89.6) 15,000 psi (103.4) 12,000 psi (82.7) 10,000 psi

Working Time 8 min. 3 - 6 min. 4 - 7 min. 15 min. 40 - 60 min. 45 min. 20 min.

Functional Cure 2 hrs. 90 min. 1 hr. 1 hr. 24 hrs. 24 hrs. 16 hrs

Chemical Resistance Good Good Good Fair Good Excellent Excellent

Package Size & IDH8.6 fl. oz. coaxial cart. - 1108886

8.6 fl. oz. coaxial cart. - 1291113

4 oz. stick - 393661 gal. kit - 2355725 gal. kit - 235573

10 lb. kit - 23563240 lb. kit - 235633

42 lb. kit - 209669 12 lb. kit - 209816

Non-drip, non-sag formula will repair holes, spalls and cracks in concrete, brick, block, and masonry on horizontal or vertical surfaces. This two part, rapid curing, high strength epox will not soften over time, amd can be used indoors or outdoors.

Two-component, self-leveling, flexible formula in coaxial cartridge. Can be used indoor or outdoors. Bonds concrete, block, brick, stone, wood and metal.

Enables permanent repairs to concrete and masonry. Convenient stick contains pre-measured portions of activator and base. Once cured can be tapped, drilled, screwed, sawed, filed or painted, and will have an appearance and texture similar to concrete.

This two-componentmagnesium phosphatecement sets rapidly andhas a very high earlystrength. Ideal for road and aircraft runway repairs, which can typically be driven over after 45 minutes. It bonds to new and old concrete as well as most construction materials including wood, glass, and steel. No water additive, so it can be applied at temperatures as low as -15°F (-26°C).

A three-component,self-leveling, non-shrinking epoxy floor repair system. 100% solids, epoxy-based system for repairing holes in floors, spalled areas, ramps, stairs, cracks in floors, and for use in grouting applications. Stronger than concrete, it bonds to almost any clean substrate and provides corrosion and chemical resistance.

A highly-filled, quartz epoxy system designed to protect old or new concrete from chemical attack. Provides a surface resistant to concentrated acids, alkalis, and solvents. Areas damaged by chemical attack may be resurfaced with HPq. Easily applied, trowelable system that should be applied at a minimumbuild to provide maximum chemical resistance. 1/4" (6.35 mm).

Smooth, glossy, lowfriction finish protectsagainst turbulence,abrasion, and cavitation. This advanced epoxyprotects equipment from extreme chemical attackand corrosion. Lowviscosity epoxy can be applied by brush.


Wear preVenTion - reclaim and repair » RESTORE WORN SuRFACES » PROvIDE WEAR - AND IMPACT-RESISTANT COATINGS » uSE ON NEW PARTS TO EXTEND LIFE » AvAILABLE IN BOTH TROWELABLE AND BRuSHABLE FORMS

are yoU experiencing impacT or Sliding abraSion ?

impacT Sliding abraSion

are you filling deep or shallow wear?

deep Shallow

low friction finish

henkel SolUTionS locTiTe® FixmasterFlex 80 putty

locTiTe® nordbak Wearing compound

locTiTe® nordbakUltra high

Temperature Wearing compound

locTiTe® nordbakhigh impact

Wearing compound

locTiTe® nordbakpneu-Wear Wearing

compound

locTiTe® nordbakhigh Temperaturebrushable ceramic

locTiTe® nordbakbrushable ceramic

locTiTe®nordbak Sprayable ceramic

locTiTe® nordbakWear resistant

putty

Color Black Grey Red Grey Grey Red Grey or White Green Grey

Maximum Temperature 180°F (82°C) 250°F (121°C) 550°F (288°C) 250°F (121°C) 250°F (121°C) 550°F (288°C) 200°F (93°C) 200°F (93°C) 225°F (107°C)

Working Time* 10 min. 30 min. 30 min. 30 min. 30 min. 120 min.Grey 30 min. White 15 min.

40 min. 30 min.

Cure Time* 8 hrs. 7 hrs.8 hrs. followed by

2 hrs. post-cure @300°F (148˚C)

6 hrs. 6 hrs.8 hrs. follow by 3

hrs. post-cure @ 300°F (148°C)

Grey 6 hrs.White 5 hrs.

6 hrs. 6 hrs.

Package Size & IDH 1 lb. kit - 2098215 lb. kit - 132400825 lb. kit - 1323940

11 lb. kit - 209816 25 lb. kit - 1327836 2 kg kit - 978755 1 kg kit - 1400739

1 kg kit grey - 9787592 kg kit grey - 978758

1 kg kit white - 10502632 kg kit white -

1050599

900ml - 13895091 lb. kit - 2356263 lb. kit - 209827

A troweable, two part urethane for rebuilding and repairing rubber part and liniing, providing impact, abrasion and corrosion resistant protection. use Flex accessory products to properly etch, clean and prime surfaces. ABS Approved.

Trowelable compound that protects against sliding abrasion. used to rebuild and protect chutes, pump housings, elbows, cyclones, and material handlingequipment.

Resists sliding abrasion and temperatures to 550°F (288°C). Must be post-cured for maximum temperature resistance and performance. Trowelable.

Rubber modifiedcompound absorbsimpacts. Recommendedwhere both slidingabrasion and impactsare present.

Resists fine particle abrasion caused in pipe elbows of pneumatic conveyor systems. ABS Approved.

Provides protection against turbulence, abrasion, and cavitation up to 550°F (288°C). Must be post-cured for maximum temperature resistance and performance.

Smooth, wear resistant, low friction coating to combat turbulence and cavitation oncomponents such aspump housings andimpellers. Grey version is approved for use in potable water systems, NSF/ANSI 61 Approved. ABS Approved.

Smooth, wear-resistant, low-friction coating to combat turbulence and cavitation on components such as pump housings and impellers.

Ceramic fibers give this trowable putty excellent wear and abrasion resistance with a smooth, low friction finish. Can be used over other wearing compounds to fill voids.

addiTional prodUcTSName Type

locTiTe® nordbak chemical resistant coating 150°F (66°C)

locTiTe® norbak Fast cure Wearing compound 3 hrs. cure

locTiTe® norbak Temperature Wearing compound 450°F (232°C)

locTiTe® norbak Ultra Temperature Wearing compound 550°F (288°C)

locTiTe® norbak Fast cure pneu Wear 3 hrs. cure

locTiTe® nordbak high Temperature pneu-Wear 450°F (232°C)

locTiTe® nordbak Ultra high Temperature pneu-Wear 550°F (288°C)

locTiTe® nordbak ceramic Tile adhesive 200°F (93°C)

locTiTe® nordbakcombo bead Wearing compound 250°F (121°C)

* At 77°F (25°C)


are yoU experiencing impacT or Sliding abraSion ?

impacT Sliding abraSion

are you filling deep or shallow wear?

deep Shallow

low friction finish

henkel SolUTionS locTiTe® FixmasterFlex 80 putty

locTiTe® nordbak Wearing compound

locTiTe® nordbakUltra high

Temperature Wearing compound

locTiTe® nordbakhigh impact

Wearing compound

locTiTe® nordbakpneu-Wear Wearing

compound

locTiTe® nordbakhigh Temperaturebrushable ceramic

locTiTe® nordbakbrushable ceramic

locTiTe®nordbak Sprayable ceramic

locTiTe® nordbakWear resistant

putty

Color Black Grey Red Grey Grey Red Grey or White Green Grey

Maximum Temperature 180°F (82°C) 250°F (121°C) 550°F (288°C) 250°F (121°C) 250°F (121°C) 550°F (288°C) 200°F (93°C) 200°F (93°C) 225°F (107°C)

Working Time* 10 min. 30 min. 30 min. 30 min. 30 min. 120 min.Grey 30 min. White 15 min.

40 min. 30 min.

Cure Time* 8 hrs. 7 hrs.8 hrs. followed by

2 hrs. post-cure @300°F (148˚C)

6 hrs. 6 hrs.8 hrs. follow by 3

hrs. post-cure @ 300°F (148°C)

Grey 6 hrs.White 5 hrs.

6 hrs. 6 hrs.

Package Size & IDH 1 lb. kit - 2098215 lb. kit - 132400825 lb. kit - 1323940

11 lb. kit - 209816 25 lb. kit - 1327836 2 kg kit - 978755 1 kg kit - 1400739

1 kg kit grey - 9787592 kg kit grey - 978758

1 kg kit white - 10502632 kg kit white -

1050599

900ml - 13895091 lb. kit - 2356263 lb. kit - 209827

A troweable, two part urethane for rebuilding and repairing rubber part and liniing, providing impact, abrasion and corrosion resistant protection. use Flex accessory products to properly etch, clean and prime surfaces. ABS Approved.

Trowelable compound that protects against sliding abrasion. used to rebuild and protect chutes, pump housings, elbows, cyclones, and material handlingequipment.

Resists sliding abrasion and temperatures to 550°F (288°C). Must be post-cured for maximum temperature resistance and performance. Trowelable.

Rubber modifiedcompound absorbsimpacts. Recommendedwhere both slidingabrasion and impactsare present.

Resists fine particle abrasion caused in pipe elbows of pneumatic conveyor systems. ABS Approved.

Provides protection against turbulence, abrasion, and cavitation up to 550°F (288°C). Must be post-cured for maximum temperature resistance and performance.

Smooth, wear resistant, low friction coating to combat turbulence and cavitation oncomponents such aspump housings andimpellers. Grey version is approved for use in potable water systems, NSF/ANSI 61 Approved. ABS Approved.

Smooth, wear-resistant, low-friction coating to combat turbulence and cavitation on components such as pump housings and impellers.

Ceramic fibers give this trowable putty excellent wear and abrasion resistance with a smooth, low friction finish. Can be used over other wearing compounds to fill voids.


groUTing » CHEMICAL AND CORROSION RESISTANCE » SELF-LEvELING AND NON-SHRINkING » STRONGER THAN CONCRETE » BOND TO CONCRETE, WOOD, METALS, BRICk AND OTHER COMMON BuILDING MATERIALS

iS ThiS a marine applicaTion?

Helpful Hints:• Replace traditional steel chocks with LOCTITE® Fixmaster Marine

Chocking for mounting equipment in the marine industry.

yeS no SeTTing anchor bolTS, Threaded rod or rebar

Self - leveling applications

Up to 1" Up to 6"

henkel SolUTionS locTiTe® Fixmaster

marine chockinglocTiTe® Fixmaster

Fast Set groutlocTiTe® Fixmaster

deep pour groutlocTiTe® Fixmasteranchor bolt grout

Color Green or Orange Red Black Grey

Maximum Temperature 250˚F (121˚C) 20˚F (93˚C) 225˚F (107˚C) 110˚F (43˚C)

Compressive Strength (N/mm2) 22,000 psi (151.7) 14,500 psi N.A. 14,500 psi (100) N.A. 14.146 lbs

Working Time 10 - 15 min. 10 min. 30 min. 20 min.

Functional Cure 24 hrs. 12 hrs. 24 hrs. 2 hrs.

Package Size & IDH

3.5 kg kit orange - 100313910 kg kit orange - 10031403.5 kg kit green - 1005903

9.35 kg resin green - 1543698 0.65 kg hardener - 1543699

2 gal. kit - 1158518 5 gal. kit - 235637 20.7 fl. oz. dual cart. - 1108885

Self-leveling, fast-curing, non-shrinking grout. Outstanding chemical andvibration resistance and compressive strength to withstand maximum loads.Approved by GL, DNv and ABS.

Self-leveling, non- shrinking grout for installing machinery and setting anchor bolts. Cures quickly. Can be poured up to 1" thick. Compression strength and chemical resistance are superior to concrete and to itself.

Aggregate-filled, epoxy system for pours up to 6" deep, including self-leveling applications under rails and sole plates. High strength material bonds to steel, concrete, and itself. Withstands high torque load.

This two part structural epoxy is solvent-free, odorless, high strength and non-sang. It is formulated to anchor threaded rods, bolts, rebar dowels, and smooth dowels into concrete, grout-filled block, and masonry. Aslo available in a high strength formula


iS ThiS a marine applicaTion?

Helpful Hints:• Replace traditional steel chocks with LOCTITE® Fixmaster Marine

Chocking for mounting equipment in the marine industry.

yeS no SeTTing anchor bolTS, Threaded rod or rebar

Self - leveling applications

Up to 1" Up to 6"

henkel SolUTionS locTiTe® Fixmaster

marine chockinglocTiTe® Fixmaster

Fast Set groutlocTiTe® Fixmaster

deep pour groutlocTiTe® Fixmasteranchor bolt grout

Color Green or Orange Red Black Grey

Maximum Temperature 250˚F (121˚C) 20˚F (93˚C) 225˚F (107˚C) 110˚F (43˚C)

Compressive Strength (N/mm2) 22,000 psi (151.7) 14,500 psi N.A. 14,500 psi (100) N.A. 14.146 lbs

Working Time 10 - 15 min. 10 min. 30 min. 20 min.

Functional Cure 24 hrs. 12 hrs. 24 hrs. 2 hrs.

Package Size & IDH

3.5 kg kit orange - 100313910 kg kit orange - 10031403.5 kg kit green - 1005903

9.35 kg resin green - 1543698 0.65 kg hardener - 1543699

2 gal. kit - 1158518 5 gal. kit - 235637 20.7 fl. oz. dual cart. - 1108885

Self-leveling, fast-curing, non-shrinking grout. Outstanding chemical andvibration resistance and compressive strength to withstand maximum loads.Approved by GL, DNv and ABS.

Self-leveling, non- shrinking grout for installing machinery and setting anchor bolts. Cures quickly. Can be poured up to 1" thick. Compression strength and chemical resistance are superior to concrete and to itself.

Aggregate-filled, epoxy system for pours up to 6" deep, including self-leveling applications under rails and sole plates. High strength material bonds to steel, concrete, and itself. Withstands high torque load.

This two part structural epoxy is solvent-free, odorless, high strength and non-sang. It is formulated to anchor threaded rods, bolts, rebar dowels, and smooth dowels into concrete, grout-filled block, and masonry. Aslo available in a high strength formula


anTi-Slip TracTion SySTem

» CHEMICAL RESISTANCE » DESIGNED TO INCREASE THE COEFFICIENT OF FRICTION (COF) » REDuCE SLIPS AND FALLS IN THE WORkPLACE

Skid prooFing For SaFeTy pUrpoSeS

Helpful Hints:• Most formulas can be rolled, sprayed, or troweled.• Finished flooring is easily cleaned with a

biodegradable cleaner/degreaser.• Remove any oil, grease, dirt, or water prior to

application.• Test for the presence of water to determine if floor

can be coated.

do you have vehicular or pedestrian traffic?

Vehicular pedestrian

Withstands the heaviest rolling equipment Traffic

Zero Voc is the most aggressive and for odor Sensitive areas

henkel SolUTionS locTiTe® big FootVehicular grade

locTiTe® big FootZero V.o.c.

locTiTe® big Foot Flexible low profile exterior grade

locTiTe® big Foot acrylic pedestrian gradelocTiTe® big Foot heavy

duty pedestrian grade

Color Black or Grey Grey or Black Grey or Black Grey or Black Grey/Black/Safety yellow

Coverage per Gal. (ft.2/meter2) 40 ft.2 (3.7 m2) 35 ft.2 (3.3 m2) 60 ft.2 (5.8 m2) 70 ft.2 (6.5 m2) 50 ft.2 (4.7 m2)

Working Time 120 min. 60 min. N.A. N.A. N.A.

Recommended Primer on Concrete or Porous SurfacesLOCTITE® Fixmaster

Water Based Primer/SealerLOCTITE® Fixmaster

Water Based Primer/SealerLOCTITE® Big Foot Acrylic Primer LOCTITE® Big Foot Acrylic Primer

LOCTITE® FixmasterWater Based Primer/Sealer

Recommended Primer on Metal Surfaces LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer

Package Size & Part No.1 gal. kit grey - 16026745 gal. kit grey - 16252031 gal. kit black - 1602678

1 gal. kit grey - 2335091 gal. kit black - 1624641

1 gal. can grey - 13547661 gal. can black - 1352349


1 gal. kit grey - 16021215 gal. pail grey - 16295991 gal. kit black - 1602679

1 gal. kit safety yellow - 1592315

Withstands even the heaviest rolling equipment traffic. Resists liquids as harsh as jet fuels and hydraulic fluids. Superior adhesion forms a solid bond to metal, concrete and wood.

This 100% reactive, solvent-free epoxy has the most aggressive profile in the Big Foot line. use in odor-sensitive areas such as wineries, food processing plants, hospitals, or confined spaces.

Single component, water-based, anti-slip coating. Designed for barefoot traffic in water-prone areas. It is chip, scuff and impact-resistant, as well as uv-resistant and flexible. Ideal for recreation areas as well as industrial and institutional facilities.

A single-component, elastometric, anti-slip floor and deck coating for optimum adhesion to asphalt and flexible applications. Best for outdoor applications.

For areas with heavy pedestrian or light rolling traffic. Ideal for ramps, walkways, locker rooms, stairs, and assembly areas.

addiTional prodUcTS

Name used on or with

locTiTe® big Foot metal primer

Metal

locTiTe® big Foot acrylic primer

LOCTITE® Big Foot Acrylic Pedestrian Grade

locTiTe® big Foot Water-based primer/ Sealer

Porous Surfaces (ex. concrete, wood, tile)

locTiTe® mixer bladesTo mix all 1 gal. kit of LOCTITE®

Big Foot flooring compounds


Skid prooFing For SaFeTy pUrpoSeS

Helpful Hints:• Most formulas can be rolled, sprayed, or troweled.• Finished flooring is easily cleaned with a

biodegradable cleaner/degreaser.• Remove any oil, grease, dirt, or water prior to

application.• Test for the presence of water to determine if floor

can be coated.

do you have vehicular or pedestrian traffic?

Vehicular pedestrian

Withstands the heaviest rolling equipment Traffic

Zero Voc is the most aggressive and for odor Sensitive areas

henkel SolUTionS locTiTe® big FootVehicular grade

locTiTe® big FootZero V.o.c.

locTiTe® big Foot Flexible low profile exterior grade

locTiTe® big Foot acrylic pedestrian gradelocTiTe® big Foot heavy

duty pedestrian grade

Color Black or Grey Grey or Black Grey or Black Grey or Black Grey/Black/Safety yellow

Coverage per Gal. (ft.2/meter2) 40 ft.2 (3.7 m2) 35 ft.2 (3.3 m2) 60 ft.2 (5.8 m2) 70 ft.2 (6.5 m2) 50 ft.2 (4.7 m2)

Working Time 120 min. 60 min. N.A. N.A. N.A.

Recommended Primer on Concrete or Porous SurfacesLOCTITE® Fixmaster

Water Based Primer/SealerLOCTITE® Fixmaster

Water Based Primer/SealerLOCTITE® Big Foot Acrylic Primer LOCTITE® Big Foot Acrylic Primer

LOCTITE® FixmasterWater Based Primer/Sealer

Recommended Primer on Metal Surfaces LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer LOCTITE® Big Foot Metal Primer

Package Size & Part No.1 gal. kit grey - 16026745 gal. kit grey - 16252031 gal. kit black - 1602678

1 gal. kit grey - 2335091 gal. kit black - 1624641



1 gal. kit grey - 16021215 gal. pail grey - 16295991 gal. kit black - 1602679

1 gal. kit safety yellow - 1592315

Withstands even the heaviest rolling equipment traffic. Resists liquids as harsh as jet fuels and hydraulic fluids. Superior adhesion forms a solid bond to metal, concrete and wood.

This 100% reactive, solvent-free epoxy has the most aggressive profile in the Big Foot line. use in odor-sensitive areas such as wineries, food processing plants, hospitals, or confined spaces.

Single component, water-based, anti-slip coating. Designed for barefoot traffic in water-prone areas. It is chip, scuff and impact-resistant, as well as uv-resistant and flexible. Ideal for recreation areas as well as industrial and institutional facilities.

A single-component, elastometric, anti-slip floor and deck coating for optimum adhesion to asphalt and flexible applications. Best for outdoor applications.

For areas with heavy pedestrian or light rolling traffic. Ideal for ramps, walkways, locker rooms, stairs, and assembly areas.


rUbber and belT repair

» REPAIR GOuGES, CuTS AND WORN EDGES ON RuBBER BELTING » NON-SHRINkING AND uNAFFECTED By OIL, GREASE AND WATER » EXCELLENT FLEXIBILITy AND ELONGATION

iS ThiS a Temporary or a long Term repair ?

Helpful Hints:• LOCTITE® Fixmaster Rapid Rubber Repair 400ml cartridges and kit require LOCTITE®

Fixmaster Universal Dispenser, IDH: 1372751.• LOCTITE® Fixmaster Instant Belt Repair requires heat.• LOCTITE® Fixmaster Instant Belt Repair can be applied at any temperature.• Use the recommended accessory products to ensure maximum adhesion and product

reliability.

Temporary long Term

do you require a fast return to service or a long working time?

Fast return to Service longer Working Time longer Working Time

henkel SolUTionS locTiTe® Fixmaster instant belt repair locTiTe® Fixmaster rapid rubber repair locTiTe® Fixmaster Flex 80 puttylocTiTe® Fixmaster Flex conveyor belt

repair kit

Color Amber Black Black Black

Working Time N.A. 1 min. 10 min. 10 min.

Tensile Strength (N/mm2) 400 psi (2.7) 1,300 psi (8.9) 1,500 psi (10.3) 1,500 psi

Functional Cure 30 min. 2 hrs. 8 hrs. 8 hrs.

Package Size & IDH 1 lb. kit. - 37719/519469400 ml kit - 432774

400 ml cart. - 428557150 ml coaxial cart. - 428791

1 lb. kit - 2098216 lb. kit - 235611

1 lb. kit - 235625

A single-component, heat-curing material for fast, temporary belt repairs, requires no priming-equipment can be operated in 30 minutes.

Our premium quality, belt repair product is designed to repair conveyor belts and other damaged rubber equipment quickly and easily. Repairs will have the same durability and flexibility as the belt. The 400 ml cartridge requires the use of a LOCTITE® Fixmater Rapid Rubber Repair Dispenser. Also available in a kit with etching agent and cleaner.

A trowelable, two-part urethane for rebuilding and repairing rubber parts and linings, providing impact, abrasion, and corrosion resistant protection. use Flex accessory products to properly etch, clean, and prime surfaces. ASB Approved.

Makes long-lasting belt repairs.Recommended for applications where speed of application is not critical. Cures in 8 - 12 hours.

addiTional prodUcTS

Name Features

locTiTe® Fixmaster etching agent

Enhances bonds to natural, SBR, and butadiene rubber

locTiTe® Fixmaster Flex cleaner

Cleans rubber, urethane or metal


iS ThiS a Temporary or a long Term repair ?

Helpful Hints:• LOCTITE® Fixmaster Rapid Rubber Repair 400ml cartridges and kit require LOCTITE®

Fixmaster Universal Dispenser, IDH: 1372751.• LOCTITE® Fixmaster Instant Belt Repair requires heat.• LOCTITE® Fixmaster Instant Belt Repair can be applied at any temperature.• Use the recommended accessory products to ensure maximum adhesion and product

reliability.

Temporary long Term

do you require a fast return to service or a long working time?

Fast return to Service longer Working Time longer Working Time

henkel SolUTionS locTiTe® Fixmaster instant belt repair locTiTe® Fixmaster rapid rubber repair locTiTe® Fixmaster Flex 80 puttylocTiTe® Fixmaster Flex conveyor belt

repair kit

Color Amber Black Black Black

Working Time N.A. 1 min. 10 min. 10 min.

Tensile Strength (N/mm2) 400 psi (2.7) 1,300 psi (8.9) 1,500 psi (10.3) 1,500 psi

Functional Cure 30 min. 2 hrs. 8 hrs. 8 hrs.

Package Size & IDH 1 lb. kit. - 37719/519469400 ml kit - 432774

400 ml cart. - 428557150 ml coaxial cart. - 428791

1 lb. kit - 2098216 lb. kit - 235611

1 lb. kit - 235625

A single-component, heat-curing material for fast, temporary belt repairs, requires no priming-equipment can be operated in 30 minutes.

Our premium quality, belt repair product is designed to repair conveyor belts and other damaged rubber equipment quickly and easily. Repairs will have the same durability and flexibility as the belt. The 400 ml cartridge requires the use of a LOCTITE® Fixmater Rapid Rubber Repair Dispenser. Also available in a kit with etching agent and cleaner.

A trowelable, two-part urethane for rebuilding and repairing rubber parts and linings, providing impact, abrasion, and corrosion resistant protection. use Flex accessory products to properly etch, clean, and prime surfaces. ASB Approved.

Makes long-lasting belt repairs.Recommended for applications where speed of application is not critical. Cures in 8 - 12 hours.


anTi-SeiZe lUbricanTS

» PROTECT AGAINST RuST, CORROSION, SEIzING AND GALLING » PROvIDE LuBRICATION IN EXTREME ENvIRONMENTS

WhaT Type oF anTi-SeiZe do yoU reQUire?

general pUrpoSeSTainleSS STeel and TiTaniUm applicaTionS

SoFT meTalapplicaTionS

incidenTalFood conTacT

WaTer reSiSTanT

Up to 1600°F(871°c)

Up to 1800°F(982°c)

Up to 2400°F(1315°c)

available in a paste orSemi-Solid Stick

available in a paste or

Semi-Solid Stick

henkel SolUTionS locTiTe® Silver gradeanti-Seize

locTiTe® c5-acopper based

anti-Seize lubricant

locTiTe® nickelanti-Seize

locTiTe® heavy dutyanti-Seize

locTiTe® Zincanti-Seize

locTiTe® Food gradeanti-Seize

locTiTe® marine gradeanti-Seize

Color Silver Copper Silver Black Grey White Black

Solid Lubricating Agent Graphite/Aluminum Copper/Graphite Nickel/GraphitGraphite/Calcium

Fluoridezinc White Lubricating Solids Calcium Sulfonate

Torque Coefficient* 0.18 0.16 0.13 0.16 0.15 0.13 0.18

Temperature Range-20°F to 1600°F(-29°C to 870°C)

-20°F to 1800°F(-29°C to 982°C)

-20°F to 2400°F(-29°C to 1315°C)

-20°F to 2400°F(-29°C to 1315°C)

-20°F to 750°F(-29°C to 399°C)

-20°F to 750°F(-29°C to 399°C)

-20°F to 2400°F(-29°C to 1315°C)

Metal-Free No No No yes No yes yes

Package Size & IDH

8 oz. brushtop - 1990121 lb. brushtop - 235005

20 g stick - 52573712 oz. aerosol - 135541



8 oz. brushtop - 2350281 lb. brushtop - 13554312 oz. aerosol - 234296

9 oz. brushtop - 2343471.2 lb. brushtop - 209758

1 lb. can - 2335078 oz. brushtop - 209749


16 oz. brushtop - 275026

Heavy duty, temperatureresistant, petroleumbasedlubricant compound fortified with graphite and metallic flake. Inert and will not evaporate or harden in extreme cold or heat. For use in assemblies up to 1600°F (871°C). ABS Approved.Tested to Mil-PRF-907E.CFIA Approved.

Exclusive formulasuspends copper andgraphite in a high qualitygrease. Protects metalparts from rust, corrosion, galling, and seizing at temperatures to 1800°F (982°C). Tested to Mil-PRF-907E. CFIA Approved.

Copper-free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 2400°F (1315°C). ABS Approved.

Excellent lubricity. Provides outstanding lubrication to all metal including stainless steel, aluminum and soft metlas up to 2400°F (1315°C).

Protects aluminum andferrous surfaces fromseizure and corrosionup to 750°F (399°C).

Prevents seizure, galling, and friction in stainless steel and other metal parts up to 750°F (399°C). NSF H1 rated for incidental food contact.

Formulated to protectassemblies exposed directly or indirectly to fresh and salt water, this anti-seize works especially well in high humidity conditions. It has excellent lubricity, superior water washoutspray resistance, andprevents galvanic corrosion. ABS Approved.

addiTional prodUcTS

Name Max Temp Features

locTiTe® n-1000 high purity anti-Seize 1800˚F (892˚C) Power plant cooper based

locTiTe® n-5000 high purity anti-Seize 2400˚F (1315˚C) Power plant nickel based

locTiTe® high performance n-5000 high purity anti-Seize

2400˚F (1315˚C)Power plant, nickel based,high lubricity

locTiTe® n-7000 high purity anti-Seize 2400˚F (1315˚C) Power plant metal-free

locTiTe® moly-50 anti-Seize 750˚F (399˚C) Thread lubricant

locTiTe® moly paste 750˚F (399˚C)Withstands extreme pressure, heavy loads

* K value on steel nuts and bolts


WhaT Type oF anTi-SeiZe do yoU reQUire?

general pUrpoSeSTainleSS STeel and TiTaniUm applicaTionS

SoFT meTalapplicaTionS

incidenTalFood conTacT

WaTer reSiSTanT

Up to 1600°F(871°c)

Up to 1800°F(982°c)

Up to 2400°F(1315°c)

available in a paste orSemi-Solid Stick

available in a paste or

Semi-Solid Stick

henkel SolUTionS locTiTe® Silver gradeanti-Seize

locTiTe® c5-acopper based

anti-Seize lubricant

locTiTe® nickelanti-Seize

locTiTe® heavy dutyanti-Seize

locTiTe® Zincanti-Seize

locTiTe® Food gradeanti-Seize

locTiTe® marine gradeanti-Seize

Color Silver Copper Silver Black Grey White Black

Solid Lubricating Agent Graphite/Aluminum Copper/Graphite Nickel/GraphitGraphite/Calcium

Fluoridezinc White Lubricating Solids Calcium Sulfonate

Torque Coefficient* 0.18 0.16 0.13 0.16 0.15 0.13 0.18

Temperature Range-20°F to 1600°F(-29°C to 870°C)

-20°F to 1800°F(-29°C to 982°C)

-20°F to 2400°F(-29°C to 1315°C)

-20°F to 2400°F(-29°C to 1315°C)

-20°F to 750°F(-29°C to 399°C)

-20°F to 750°F(-29°C to 399°C)

-20°F to 2400°F(-29°C to 1315°C)

Metal-Free No No No yes No yes yes

Package Size & IDH





8 oz. brushtop - 2350281 lb. brushtop - 13554312 oz. aerosol - 234296

9 oz. brushtop - 2343471.2 lb. brushtop - 209758



16 oz. brushtop - 275026

Heavy duty, temperatureresistant, petroleumbasedlubricant compound fortified with graphite and metallic flake. Inert and will not evaporate or harden in extreme cold or heat. For use in assemblies up to 1600°F (871°C). ABS Approved.Tested to Mil-PRF-907E.CFIA Approved.

Exclusive formulasuspends copper andgraphite in a high qualitygrease. Protects metalparts from rust, corrosion, galling, and seizing at temperatures to 1800°F (982°C). Tested to Mil-PRF-907E. CFIA Approved.

Copper-free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 2400°F (1315°C). ABS Approved.

Excellent lubricity. Provides outstanding lubrication to all metal including stainless steel, aluminum and soft metlas up to 2400°F (1315°C).

Protects aluminum andferrous surfaces fromseizure and corrosionup to 750°F (399°C).

Prevents seizure, galling, and friction in stainless steel and other metal parts up to 750°F (399°C). NSF H1 rated for incidental food contact.

Formulated to protectassemblies exposed directly or indirectly to fresh and salt water, this anti-seize works especially well in high humidity conditions. It has excellent lubricity, superior water washoutspray resistance, andprevents galvanic corrosion. ABS Approved.


SUrFace proTecTion and rUST TreaTmenT

belT dreSSing rUST conVerTer caThodic proTecTion non-drying color coding anTi-Weld SpaTTer

henkel SolUTionS locTiTe® belt dressing & conditioner

locTiTe® 7600 rust converter locTiTe® cold galvanizing

compoundlocTiTe® maxi-coat locTiTe® color guard

locTiTe® SF 7900 ceramic

Shield

Description Liquid Spray Metal Treatment zinc Spray Waxy Film Rubber Coating Dry Film

Color Colorless Transparent Grey Brown Red, yellow, Blue, Black White

Temperature Range up to 200°F (93°C) N.A. up to 400°F (204°C) up to 200°F (93°C) up to 200°F (93°C) up to 200°F (93°C)

Dry Time N.A. N.A. 15 min. N.A. 4 hrs. 30 sec.

Package Size & IDH 12 oz. aerosol - 2265954 L - 15986171 L - 1598618

500 ml - 1598619 15 oz. aerosol - 209802

12 oz. aerosol - 2097501 gal. can - 209752

14.5 fl. oz. can red - 3381301 gal. can red - 338131

14.5 fl. oz. can yellow - 3381331 gal. can yellow - 338134

14.5 fl. oz. can blue - 3381271 gal. can blue - 338128

14.5 fl. oz. can black - 3381241 gal. can black - 338125

400 ml - 1616692

Recommended to prevent slipping and increase friction for all types of belts. Extends belts life. Penetrates the cord fibers of ‘v’ belts to restore pliability and flexibility. Eliminates squeaking and glazing.

Cleans, converts and etches ferrous metals making it ready for a coating.

Sprays on metal surfaces to prevent corrosion even when the surface is scratched. Ideal touch up for welded seams. Highly resistant to salt corrosion and water. Not resistant to acid or alkaline solutions. Contains no ozone-depleting compounds.

Heavy-duty coating provides long-term protection for metal parts, equipment and machinery. Forms a protective, wax film which seals out moisture, air, acid and other corrosive elements. Great for protecting part in storage. Removable.


Innovative ceramic protective coating that protects welding equipment against metal spatter for eight hours, without reapplication. Minimizes equipment cleaning and eliminates downtime, reducing cost and enhancing productivity.

SUrFace proTecTion and rUST TreaTmenT » STABILIzE EXISTING RuST » GuARD AGAINST CORROSION » PREvENT ELECTROCHEMICAL CORROSION » INCREASE BELT FRICTION

addiTional prodUcTS

Name Features

locTiTe® primer for color guard Solvent based, modified thermoplastic liquid coating in various colors. Dries to a durable, flexible true synthetic rubber protective coating.

locTiTe® norbak chemical resistant coatingProtect equipment against extreme corrosion caused by chemical exposure. Impervious ceramic composite that offers an ultra smooth glossy surface. This technology significantly improves and reduces the surface friction that causes “boundary drag”.


SUrFace proTecTion and rUST TreaTmenT

belT dreSSing rUST conVerTer caThodic proTecTion non-drying color coding anTi-Weld SpaTTer

henkel SolUTionS locTiTe® belt dressing & conditioner

locTiTe® 7600 rust converter locTiTe® cold galvanizing

compoundlocTiTe® maxi-coat locTiTe® color guard

locTiTe® SF 7900 ceramic

Shield

Description Liquid Spray Metal Treatment zinc Spray Waxy Film Rubber Coating Dry Film

Color Colorless Transparent Grey Brown Red, yellow, Blue, Black White

Temperature Range up to 200°F (93°C) N.A. up to 400°F (204°C) up to 200°F (93°C) up to 200°F (93°C) up to 200°F (93°C)

Dry Time N.A. N.A. 15 min. N.A. 4 hrs. 30 sec.

Package Size & IDH 12 oz. aerosol - 2265954 L - 15986171 L - 1598618

500 ml - 1598619 15 oz. aerosol - 209802

12 oz. aerosol - 2097501 gal. can - 209752

14.5 fl. oz. can red - 3381301 gal. can red - 338131

14.5 fl. oz. can yellow - 3381331 gal. can yellow - 338134

14.5 fl. oz. can blue - 3381271 gal. can blue - 338128

14.5 fl. oz. can black - 3381241 gal. can black - 338125

400 ml - 1616692

Recommended to prevent slipping and increase friction for all types of belts. Extends belts life. Penetrates the cord fibers of ‘v’ belts to restore pliability and flexibility. Eliminates squeaking and glazing.

Cleans, converts and etches ferrous metals making it ready for a coating.

Sprays on metal surfaces to prevent corrosion even when the surface is scratched. Ideal touch up for welded seams. Highly resistant to salt corrosion and water. Not resistant to acid or alkaline solutions. Contains no ozone-depleting compounds.



Innovative ceramic protective coating that protects welding equipment against metal spatter for eight hours, without reapplication. Minimizes equipment cleaning and eliminates downtime, reducing cost and enhancing productivity.


cleaning

elecTrical conTacTS gaSkeT remoVing hand cleaner biodegradable degreaSer

henkel SolUTionS locTiTe® electrical contact & parts cleaner

locTiTe® non-Flammable

electrical contact cleaner

locTiTe® 790 chiselgasket remover

locTiTe® orange lotionhand cleaner

Smooth Formula

locTiTe® natural bluebiodegradable cleaner &

degreaser

locTiTe® odc-Freecleaner & degreaser

locTiTe® pro Strength parts cleaner

kB values* 38 38 Greater than 200 N.A. N.A. 34 132

Package Size & IDH 11 oz. aerosol - 209739 14 oz. aerosol - 439223 18 oz. aerosol - 135544400 ml bottle - 419271 400 ml bottle - 366943

4 fl. oz. bottle - 23550124 fl. oz. spray bottle -

2355021 gal. bottle - 209804

5 gal. pail - 235503

15 oz. aerosol - 23156216 oz. pump spray -

1353101 gal. can - 230176

19 oz. aerosol - 234941

Fast-evaporating cleaner removes grease, oil and other contaminates from electrical parts and mechnical eqipment. Contains no CFCs or HCFCs and is safe on most plastics. Non-conductive and non-corrosive.

Removes grease, oil, and other contaminates from electrical parts to prevent contact failure. Dries residue-free in seconds. Contains no HCFCs or CFCs.

Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scrapin and sadin. Works on wood; non-corrosive on aluminum. Not for use with plastics, Linoleum, or synthetic fibers.

Contains premium-grade cleansing agents that quickly dissolve dirt, grease, resin, ink, paint, glue, rubber gasket and tile cements, and oter stubbom soils. Citrus-based, smooth formula is PH balanced and fortified with skin conditioners lanolin, aloe vera, vitamin E, jojoba, and wheat germ extract to soothe and protect raw, rough hands. Formulated for those who prefer a hand cleaner without pumice, or for those with extra sensitive skin.

Biodegradable, all-purpose, industrial strength, concentrated cleaner and degreaser. Can be economically diluted with water. Formulated for wipe down, pressure spraying, ad immersion cleaing processes at room temperature or heated. Non-flammable and non-toxic. Contains no ODCs. Available in pine scent or unscented formulas.

A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause flash rusting on water-sensitive parts. Dries residue-free. Contains no ozone-depleting compounds. (Formerly referenced as LOCTITE® 7070).

Aggressively penetrates, dissolves, and removes oil and grease from parts. Dries quickly with no residue. Contains ODCs.

cleaning

» CLEAN AND DEGREASE WORk SuRFACES, PARTS AND HANDS


cleaning

elecTrical conTacTS gaSkeT remoVing hand cleaner biodegradable degreaSer

henkel SolUTionS locTiTe® electrical contact & parts cleaner

locTiTe® non-Flammable

electrical contact cleaner

locTiTe® 790 chiselgasket remover

locTiTe® orange lotionhand cleaner

Smooth Formula

locTiTe® natural bluebiodegradable cleaner &

degreaser

locTiTe® odc-Freecleaner & degreaser

locTiTe® pro Strength parts cleaner

kB values* 38 38 Greater than 200 N.A. N.A. 34 132

Package Size & IDH 11 oz. aerosol - 209739 14 oz. aerosol - 439223 18 oz. aerosol - 135544400 ml bottle - 419271 400 ml bottle - 366943

4 fl. oz. bottle - 23550124 fl. oz. spray bottle -

2355021 gal. bottle - 209804

5 gal. pail - 235503

15 oz. aerosol - 23156216 oz. pump spray -

1353101 gal. can - 230176

19 oz. aerosol - 234941

Fast-evaporating cleaner removes grease, oil and other contaminates from electrical parts and mechnical eqipment. Contains no CFCs or HCFCs and is safe on most plastics. Non-conductive and non-corrosive.

Removes grease, oil, and other contaminates from electrical parts to prevent contact failure. Dries residue-free in seconds. Contains no HCFCs or CFCs.

Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scrapin and sadin. Works on wood; non-corrosive on aluminum. Not for use with plastics, Linoleum, or synthetic fibers.

Contains premium-grade cleansing agents that quickly dissolve dirt, grease, resin, ink, paint, glue, rubber gasket and tile cements, and oter stubbom soils. Citrus-based, smooth formula is PH balanced and fortified with skin conditioners lanolin, aloe vera, vitamin E, jojoba, and wheat germ extract to soothe and protect raw, rough hands. Formulated for those who prefer a hand cleaner without pumice, or for those with extra sensitive skin.

Biodegradable, all-purpose, industrial strength, concentrated cleaner and degreaser. Can be economically diluted with water. Formulated for wipe down, pressure spraying, ad immersion cleaing processes at room temperature or heated. Non-flammable and non-toxic. Contains no ODCs. Available in pine scent or unscented formulas.

A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause flash rusting on water-sensitive parts. Dries residue-free. Contains no ozone-depleting compounds. (Formerly referenced as LOCTITE® 7070).

Aggressively penetrates, dissolves, and removes oil and grease from parts. Dries quickly with no residue. Contains ODCs.


high perFormance lUbricaTion

dry Film greaSe aeroSol

henkel SolUTionS locTiTe® moly dry Film lubricant

locTiTe® Viper lube high performance Synthetic grease

locTiTe® Viper lube clear high performance Synthetic grease

locTiTe® gear, chain & cable lubricant

locTiTe® maintain lube ml-11 anti-rust

Base Oil Molybdenum Disulfide PAO PAO Standard Solvent

viscosity N.A. 240 CST 103 CST Low Low

Temperature Range-20°F to 750°F

(-29°C to 399°C)-40°F to 500°F

(-40°C to 260°C)-45°F to 520°F(-23°C to 271°C)

250°F (121°C) Room Temperature

Four Ball Wear Test (mm) (ASTM D-2266) N.A. 0.42 0.6 N.A. N.A.

Food Grade N.A. NSF H1 NSF H1 N.A. N.A.

Package Size & IDH12 oz. aerosol - 226675

1.3 lb. can - 233501

3 oz. tube - 45745614 oz. cart. - 457457400 g can - 457458

3 oz. tube - 675961 12 oz. aerosol - 81251 360 ml - 852756

Solid film lubricant for sliding surfaces and slow-moving parts. Temperature resistant up to 750°F (399°C) as a dry film lubricant, 2400 F (1315°C) as an anti-seize. Won’t squeeze out, burn off, or pick up dirt.

NLGI Grade 2/Severe Dut GC-LB Grease provides protection against equipment exposed to a wide range of temperatures. uses as a lubricant and protective anti-rust film on bearing and machine parts, or as a release agent on gaskets and seals. NSF H1 rated for incidental food contact.

Last four times longer than petroleum-based lubricant. Withsatnads temperatures up to 420°F (520°F intermittent). Contains PTFE for added protection against friction and wear. Nonflammable. Contains no ODCs. Clear in color. NLGI 2 grade grease. NSF h1 rated for incidental food contact.

A clear, oily spray lubricant that protects and prolongs the life of gears, chains and wire rope.Typical applications include chain-driven equipment-chain,pin, roller and bushing areas. Sprockets, open gears, wirerope, pulleys, snatch blocks, hoists, conveyors, fork lifts,elevators, overhead door drives, mining, construction,earthmoving and material handling equipment.

This product is a rust prohibitor and lubricant for use on metal or plastic parts. Powerful penetration. Long term rust protection. Strong lubricant. Surface cleaner. Contains no CFC‘s.

lUbricanTS » TEMPERATuRE RESISTANCE » THERMAL STABILITy » PENETRATE AND FREE CORRODED ASSEMBLIES


high perFormance lUbricaTion

dry Film greaSe aeroSol

henkel SolUTionS locTiTe® moly dry Film lubricant

locTiTe® Viper lube high performance Synthetic grease

locTiTe® Viper lube clear high performance Synthetic grease

locTiTe® gear, chain & cable lubricant

locTiTe® maintain lube ml-11 anti-rust

Base Oil Molybdenum Disulfide PAO PAO Standard Solvent

viscosity N.A. 240 CST 103 CST Low Low

Temperature Range-20°F to 750°F

(-29°C to 399°C)-40°F to 500°F

(-40°C to 260°C)-45°F to 520°F(-23°C to 271°C)

250°F (121°C) Room Temperature

Four Ball Wear Test (mm) (ASTM D-2266) N.A. 0.42 0.6 N.A. N.A.

Food Grade N.A. NSF H1 NSF H1 N.A. N.A.

Package Size & IDH12 oz. aerosol - 226675

1.3 lb. can - 233501

3 oz. tube - 45745614 oz. cart. - 457457400 g can - 457458

3 oz. tube - 675961 12 oz. aerosol - 81251 360 ml - 852756

Solid film lubricant for sliding surfaces and slow-moving parts. Temperature resistant up to 750°F (399°C) as a dry film lubricant, 2400 F (1315°C) as an anti-seize. Won’t squeeze out, burn off, or pick up dirt.

NLGI Grade 2/Severe Dut GC-LB Grease provides protection against equipment exposed to a wide range of temperatures. uses as a lubricant and protective anti-rust film on bearing and machine parts, or as a release agent on gaskets and seals. NSF H1 rated for incidental food contact.

Last four times longer than petroleum-based lubricant. Withsatnads temperatures up to 420°F (520°F intermittent). Contains PTFE for added protection against friction and wear. Nonflammable. Contains no ODCs. Clear in color. NLGI 2 grade grease. NSF h1 rated for incidental food contact.

A clear, oily spray lubricant that protects and prolongs the life of gears, chains and wire rope.Typical applications include chain-driven equipment-chain,pin, roller and bushing areas. Sprockets, open gears, wirerope, pulleys, snatch blocks, hoists, conveyors, fork lifts,elevators, overhead door drives, mining, construction,earthmoving and material handling equipment.

This product is a rust prohibitor and lubricant for use on metal or plastic parts. Powerful penetration. Long term rust protection. Strong lubricant. Surface cleaner. Contains no CFC‘s.


SpecialTy and emergency repair kiTS » ENABLES RAPID REPAIR OF DAMAGED OR BuRST PIPES » WILL SEAL LEAkS IN TANkS AND OTHER CONTAINMENT vESSELS IN ADDITION TO REPARING METAL PARTS

» INCLuDES A kIT FOR REPAIRING OR REPLACING DAMAGED O-RING SEALS

SpecialTy and emergency repair

Helpful Hints:• Use LOCTITE® Fixmaster Rubber Repair Dispenser with LOCTITE® Fixmaster Rapid RubberRepair Kit.

replace or repair o-ring seals repair stripped threads Stop pipe leaks Underwater repairs insulation and sealing

henkel SolUTionS locTiTe® o-ring making kitlocTiTe® Form-a-Thread

Stripped Thread repair kit locTiTe® pipe repair kitlocTiTe® Fixmaster

Underwater repair epoxylocTiTe® insulating &

Sealing Wrap

IDH 228171 2363822"x6' (5x182 cm) tape - 209818

4"x12' (10x365 cm) tape - 2690784 oz. stick - 235487

1"x10' tape - Red - 12121641"x10' tape - Black - 1540599

2"x36' tape - Black - 14967556

Eliminates the need for an inventory of different sized o-rings. joints resist water and oil and are as strong as the rubber itself. Contains 3 ft. (5.48m) lengths of common diameters of Buna N cord, LOCTITE® 404 quick Set Instant Adhesive, o-ring fixture, blade, waterproofing solution, and cleanup solution.

Permanently repairs stripped threads and fasteners in five minutes (up to SAE Grade 5 English and 8.8 metric). Allows up to 128 lb. (28 kg) in torque and 300°F (150°C). Resists most shop fluids.

No tools required. Cures in 30 minutes. Easy-touse repair kit. use for temporary/medium term repair of leaking pipes, and reinforcement of weak areas. kit contains protective gloves, LOCTITE® Metal Magic Steel Stick, and urethane-impregnated fiberglass tape.

This putty-like material is ideal for plumbing, irrigation, and marineapplications because it is unaffected by chlorinated or salt water. It is hand kneadable and fully cures in 1 hour.

This innovative self-fusing silicone wrap is perfect for electrical insulation and sealing applications even for pipes under pressure. It withstands extrem conditions such as salt water, fuel and acid fluids exposure, temperatures ranging from -65°F to 500°F, tensile strength up to 400 vpm. It is also suited for an unlimited number of other applications such as tool handle wrapping, harness wrapping, temporary clamping, vibration damping, underwater repairs and much more.


SpecialTy and emergency repair

Helpful Hints:• Use LOCTITE® Fixmaster Rubber Repair Dispenser with LOCTITE® Fixmaster Rapid RubberRepair Kit.

replace or repair o-ring seals repair stripped threads Stop pipe leaks Underwater repairs insulation and sealing

henkel SolUTionS locTiTe® o-ring making kitlocTiTe® Form-a-Thread

Stripped Thread repair kit locTiTe® pipe repair kitlocTiTe® Fixmaster

Underwater repair epoxylocTiTe® insulating &

Sealing Wrap

IDH 228171 2363822"x6' (5x182 cm) tape - 209818

4"x12' (10x365 cm) tape - 2690784 oz. stick - 235487

1"x10' tape - Red - 12121641"x10' tape - Black - 1540599

2"x36' tape - Black - 14967556

Eliminates the need for an inventory of different sized o-rings. joints resist water and oil and are as strong as the rubber itself. Contains 3 ft. (5.48m) lengths of common diameters of Buna N cord, LOCTITE® 404 quick Set Instant Adhesive, o-ring fixture, blade, waterproofing solution, and cleanup solution.

Permanently repairs stripped threads and fasteners in five minutes (up to SAE Grade 5 English and 8.8 metric). Allows up to 128 lb. (28 kg) in torque and 300°F (150°C). Resists most shop fluids.

No tools required. Cures in 30 minutes. Easy-touse repair kit. use for temporary/medium term repair of leaking pipes, and reinforcement of weak areas. kit contains protective gloves, LOCTITE® Metal Magic Steel Stick, and urethane-impregnated fiberglass tape.

This putty-like material is ideal for plumbing, irrigation, and marineapplications because it is unaffected by chlorinated or salt water. It is hand kneadable and fully cures in 1 hour.

This innovative self-fusing silicone wrap is perfect for electrical insulation and sealing applications even for pipes under pressure. It withstands extrem conditions such as salt water, fuel and acid fluids exposure, temperatures ranging from -65°F to 500°F, tensile strength up to 400 vpm. It is also suited for an unlimited number of other applications such as tool handle wrapping, harness wrapping, temporary clamping, vibration damping, underwater repairs and much more.


acceSSorieS

henkel SolUTionS locTiTe® bottle hand pumplocTiTe® dual manual cartridge applicator

- heavy duty

locTiTe® manual cartridge applicator -

heavy duty

Item number 50 ml: 98414/250 ml: 97001 1093981 1093940

IDH number 50 ml: 608966/250 ml: 88631 1093981 1093940

This hand held applicator is a lowcost, precision bottle

top applicator that mounts easily on the top of any

LOCTITE® brand 50 ml or 250 ml bottle.

LOCTITE® non-sag hight viscosity anchor bolt grounting

formulas require a heavy-duty dispensing tool. This

applicator is for use with 300 ml x 300 (20.7 oz.)

cartridges.

LOCTITE® non sag high viscosity anchor bolt grounting

formulas require a heavy-duty dispensing tool. This

applicator is for use with 300 ml (8.6 oz.) cartridges.

henkel SolUTionS locTiTe® manual applicatorlocTiTe® Fixmaster

rapid rubber repair dispenserlocTiTe® 50 ml-F-Tube Squeeze dispenser

Item number 98472 1372751 1083845

IDH number 720228 1372751 1083845

Two-component epoxies are dispensed through hand

held, manually operated, meter-mix dispensers. These

dispensers provide a convenient, cost-effective method

to apply product with minimal waste.

Easy-to-use applicator for the LOCTITE® Fixmaster Rapid

Rubber Repair kit.

Designed to dispense all LOCTITE® products that come in

50 ml tubes. Ergonomic, easy to use dispenser improves

bead positioning and reduces waste.

henkel SolUTionSlocTiTe® phenolic roller and

locTiTe® bristle roller

locTiTe® Fixmaster

rapid rubber repair

Static mixers

locTiTe® mixer blades

Item numberPhenolic Romer 96121/

Bristle Romer 9615339633 96131

IDH number 303595/236388 243335 303596

These rollers are recommended for applying the

LOCTITE® brand Big Foot range of flooring compounds.

The LOCTITE® Phenolic Roller gives a rough surface and

the LOCTITE® Bristle Roller is used for applying primers

and sealers.

These mixing nozzles are for use with LOCTITE®

Fixmaster Rapid Rubber Repair urethane in the 400 ml

cartridge. Packaged in bags of 6.

For use with all 1 gal. kits of LOCTITE® brand Big Foot

flooring compounds.


agency liSTingSHenkel products are designed to meet tHe specifications and testing standards of a variety of agencies. Because sucH standards cHange or may Be modified, no warranty is given regarding sucH compliance. tHe information provided may Be used as a quick reference tool to aid in design or application. for up-to tHe minute information on agency approvals, or to inquire aBout additional agency approvals, please contact Henkel product management team or local tecHnical support team.

legend: = non-Food grade = Standard 51 = Standard 61

nSF international nSF international lloyd’s registerSm certification LOCTITE® 222MS Threadlocker, Low Strength/Small Screw LOCTITE® Fixmaster Marine Chocking LOCTITE® 242 Threadlocker, Medium Strength LOCTITE® Fixmaster Aluminum Liquid LOCTITE® 242 Threadlocker, Medium Strength LOCTITE® Fixmaster Aluminum Putty LOCTITE® 243 Threadlocker, Medium Strength/Oil Resistant LOCTITE® Fixmaster Fast Set Steel Epoxy LOCTITE® 262 Threadlocker, Medium to High Strength LOCTITE® Fixmaster Steel Liquid LOCTITE® 263 Red Threadlocker, High Strength LOCTITE® Fixmaster Steel Putty LOCTITE® 290 Threadlocker, Wicking Grade LOCTITE® Fixmaster Stainless Steel Putty LOCTITE® 290 Threadlocker, Wicking Grade LOCTITE® Fixmaster Superior Metal LOCTITE® 480 Instant Adhesive LOCTITE® Fixmaster Wear-Resistant Putty LOCTITE® 518 Flange Sealant LOCTITE® Nordbak Pneu-Wear LOCTITE® 561 Pipe Sealant LOCTITE® Nordbak Brushable Ceramic, Grey LOCTITE® 565 Thread Sealant, Controlled Strength LOCTITE® 567 Thread Sealant deT norSke VeriTaS (dnV) LOCTITE® 587 Blue, High Performance RTv Silicone Gasket Maker LOCTITE® Fixmaster Marine Chocking LOCTITE® 680 Retaining Compound, Slip Fit/High Strength LOCTITE® 5900 (FLANGE SEALANT) china claSSiFicaTion SocieTy (ccS) LOCTITE® 7649 Primer N LOCTITE® Fixmaster Marine Chocking, Green LOCTITE® 7649 Primer N LOCTITE® Food Grade Anti-Seize germanicher lloyd (gl) LOCTITE® Food Grade Grease LOCTITE® Fixmaster Marine Chocking LOCTITE® Fixmaster Metal Magic Steel LOCTITE® krytox RFE PFPE Lubricant bUreaU VeriTaS (bV) LOCTITE® krytox RFE PFPE High Performance Lubricant LOCTITE® Fixmaster Marine Chocking LOCTITE® ODC-Free Cleaner & Degreaser LOCTITE® Superflex RTv, Silicone Adhesive Sealants (Clear) man diesel & Turbo LOCTITE® viperLube Clear High Performance Synthetic Grease LOCTITE® Fixmaster Marine Chocking LOCTITE® viperLube High Performance Synthetic Grease Aerosol LOCTITE® viperLube High Performance Synthetic Grease rina LOCTITE® Nordbak Brushable Ceramic, Grey LOCTITE® Fixmaster Marine Chocking

american bureau of Shipping (abS) Sai globalLOCTITE® 242 Threadlocker, Medium Strength LOCTITE® 577 Flange SealantLOCTITE® 262 Threadlocker, Medium to High Strength LOCTITE® 680 Retaining Compound LOCTITE® 404 quick Set Instant Adhesive, General-Purpose LOCTITE® Pipe Sealing Cord 55LOCTITE® 454 Instant Adhesive, Surface Insensitive Gel LOCTITE® Nordbak Brushable Ceramic White kitLOCTITE® 495LOCTITE® 545 Thread Sealant, Hydraulic/Pneumatic Fittings military Specifications (mil Spec)LOCTITE® 567 Thread Sealant, High Temperature LOCTITE® 220 Threadlocker, Wicking Grade/Low StrengthLOCTITE® 587 Blue, High Performance RTv Silicone Gasket Maker LOCTITE® 222MS Threadlocker, Low Strength/Small ScrewLOCTITE® 620 Retaining Compound, Slip Fit/High Temperature LOCTITE® 242 Threadlocker, Medium StrengthLOCTITE® 680 Retaining Compound, Slip Fit/High Strength LOCTITE® 262 Threadlocker, Medium to High StrengthLOCTITE® Extend Rust Treatment (754) LOCTITE® 271 Threadlocker, High StrengthLOCTITE® Fixmaster Aluminum Liquid LOCTITE® 277 Threadlocker, High Strength/Large ThreadsLOCTITE® Fixmaster Aluminum Putty LOCTITE® 290 Threadlocker, Wicking GradeLOCTITE® Fixmaster Fast Set Steel Putty LOCTITE® 609 Retaining Compound, Press Fit/General-PurposeLOCTITE® Fixmaster Flex 80 Putty LOCTITE® 635 Retaining Compound, Slip Fit/High Strength/Slow CureLOCTITE® Fixmaster Marine Chocking LOCTITE® 640 Retaining Compound, LOCTITE® Fixmaster Steel Liquid LOCTITE® 675 Retaining Compound, Press Fit/Medium StrengthLOCTITE® Fixmaster Steel Putty LOCTITE® 7471 Primer TLOCTITE® Nordbak Wear Resistant Putty LOCTITE® 7649 Primer NLOCTITE® Fixmaster Wet Surface Repair PuttyLOCTITE® Marine Grade Anti-SeizeLOCTITE® Nordbak Pneu-Wear

Henkel products are designed to meet the specifications and testing standards of a variety of agencies. Because such standards change or may be modified, no warranty is given regarding such compli-ance. The information provided may be used as a quick reference tool to aid in design or application. For up-to the minute information on agency approvals, or to inquire about additional agency appro-vals, please contact Henkel Product Management team or local Technical Support team.


prodUcT orderinginFormaTion

product name idh no. pkg. Size page product name idh

no. pkg. Size page

LOCTITE® 222 - Threadlocking - Low Strength 1595017 10 ml bottle 4 LOCTITE® 542 - Thread Sealing - Medium Strengh 339605 250 ml 6

LOCTITE® 222 - Threadlocking - Low Strength 228581 50 ml bottle 4 LOCTITE® 545 - Thread Sealing 232095 50 ml bottle 6

LOCTITE® 222 - Threadlocking - Low Strength 228582 250 ml bottle 4 LOCTITE® 545 - Thread Sealing 1327769 250 ml tube 6

LOCTITE® 242 - Threadlocking - Medium Strength 263556 10 ml bottle 4 LOCTITE® 55 - Thread Sealing 270135 5,700 inches (150 m) 6




LOCTITE® 243 - Threadlocking - Medium Strength 1311320 50 ml bottle 5 LOCTITE® 5570 Adhesive 1073348 White 300 ml cart. 17

LOCTITE® 243 - Threadlocking - Medium Strength 1311322 250 ml bottle 5 LOCTITE® 561 - Thread Sealing 463973 19 g stick 7

LOCTITE® 248 - Threadlocking - Medium Strength 37772 9 g stick 5 LOCTITE® 565 - Thread Sealing 339604 50 ml tube 7

LOCTITE® 248 - Threadlocking - Medium Strength 37773 19 g stick 5 LOCTITE® 565 - Thread Sealing 449139 250 ml tube 7

LOCTITE® 262 - Threadlocking - High Strength 235943 10 ml bottle 4 LOCTITE® 5651 - Thread Sealing - Low Strength 378274 250 ml cart. 6

LOCTITE® 262 - Threadlocking - High Strength 232073 50 ml bottle 4 LOCTITE® 567 - Thread Sealing 231701 50 ml tube 7


LOCTITE® 263 - Threadlocking - High Strength 1331617 10 ml bottle 5 LOCTITE® 569 - Thread Sealing - Low Strength 231252 50 ml 6

LOCTITE® 263 - Threadlocking - High Strength 1307415 50 ml bottle 5 LOCTITE® 569 - Thread Sealing - Low Strength 250598 250 ml 6

LOCTITE® 263 - Threadlocking - High Strength 1307416 250 ml bottle 5 LOCTITE® 574 Gasket Eliminator Flange Sealant 830808 250 ml 8

LOCTITE® 268 - Threadlocking - High Strength 1069297 9 g stick 5 LOCTITE® 574 Gasket Eliminator Flange Sealant 1240909 1 L 8

LOCTITE® 268 - Threadlocking - High Strength 902328 19 g stick 5 LOCTITE® 574 Gasket Eliminator Flange Sealant 1231851 2 L 8



LOCTITE® 271 - Threadlocking - High Strength 235214 250 ml bottle 4 LOCTITE® 587 - Gasketing 231482 85 g tube 9

LOCTITE® 272 - Threadlocking - High Strength 335304 50 ml bottle 4 LOCTITE® 587 - Gasketing 576854 370 g cart. 9



LOCTITE® 277 - Threadlocking - High Strength 232083 250 ml bottle 4 LOCTITE® 603 - Retaining 387887 50 ml bottle 10


LOCTITE® 290 - Threadlocking - High Strength 232085 50 ml bottle 4 LOCTITE® 609 - Retaining - Medium Strength 232100 50 ml bottle 11


LOCTITE® 330 Depend Adhesive 1690727 25 ml syringe kit 15 LOCTITE® 620 - Retaining 231128 250 ml bottle 10

LOCTITE® 331 Structural Adhesive 1057673 25 ml syringe 15 LOCTITE® 638 - Retaining - High Strength 1800356 50 ml bottle 11

LOCTITE® 380 Black Max Instant Adhesive 135423 1 oz. bottle 13 LOCTITE® 638 - Retaining - High Strength 1800355 250 ml bottle 11

LOCTITE® 401 Prism Instant Adhesive 250356 3 g 13 LOCTITE® 638 - Retaining - High Strength 31002 250 ml bottle 11

LOCTITE® 401 Prism Instant Adhesive 231472 20 g 13 LOCTITE® 641 - Retaining - Low Strength 387885 50 ml bottle 10



LOCTITE® 404 quick Set Instant Adhesive 135465 1 ⁄ 3 oz. bottle 13 LOCTITE® 648 - Retaining - High Strength 1800575 50 ml bottle 11

LOCTITE® 404 quick Set Instant Adhesive 234044 4 oz. bottle 13 LOCTITE® 648 - Retaining - High Strength 1800574 250 ml bottle 11

LOCTITE® 435 Prism Instant Adhesive 840057 20 g bottle 12 LOCTITE® 660 - Retaining - High Strength 231699 50 ml tube 10

LOCTITE® 435 Prism Instant Adhesive 840071 1 lb. bottle 12 LOCTITE® 668 - Retaining - Medium Strength 640470 19 g stick 11

LOCTITE® 454 Prism Instant Adhesive 135462 20 g 13 LOCTITE® 680 - Retaining 232112 50 ml bottle 10

LOCTITE® 454 Prism Instant Adhesive 88525 300 g 13 LOCTITE® 7471 - Threadlocking - Primer 1179078 1.75 oz. 5

LOCTITE® 480 Prism Instant Adhesive 852269 20 g tube 13 LOCTITE® 7471 - Threadlocking - Primer 555104 100 ml 5

LOCTITE® 480 Prism Instant Adhesive 1066833 50 g bottle 13 LOCTITE® 7471 - Threadlocking - Primer 555110 4.5 oz. 5

LOCTITE® 480 Prism Instant Adhesive 1019264 500 g bottle 13 LOCTITE® 7471 - Threadlocking - Primer 555112 500 ml 5

LOCTITE® 50 ML-F-Tube Squeeze Dispenser 1083845 40 LOCTITE® 7600 Rust Converter 1598617 4 L 32

LOCTITE® 510 - Gasketing 235255 50 ml tube 9 LOCTITE® 7600 Rust Converter 1598618 1 L 32

LOCTITE® 510 - Gasketing 231352 300 ml cart. 9 LOCTITE® 7600 Rust Converter 1598619 500 ml 32

LOCTITE® 510 - Gasketing 939535 850 ml cart. 9 LOCTITE® 7649 - Threadlocking - Primer 1179077 1.75 oz. 5

LOCTITE® 5127 Gasket Eliminator Flange Sealant 1083501 50 ml 8 LOCTITE® 7649 - Threadlocking - Primer 555114 100 ml 5

LOCTITE® 5127 Gasket Eliminator Flange Sealant 449138 300 ml 8 LOCTITE® 7649 - Threadlocking - Primer 475763 4.5 oz. 5

LOCTITE® 515 Gasket Eliminator Flange Sealant 231695 50 ml 8 LOCTITE® 7649 - Threadlocking - Primer 487644 500 ml 5

LOCTITE® 515 Gasket Eliminator Flange Sealant 232089 300 ml 8 LOCTITE® 790 Chisel Gasket Remover 135544 18 oz. aerosol 8, 35

LOCTITE® 518 - Gasketing 231697 50 ml tube 8 LOCTITE® All Purpose Spray Adhesive 234933 12

LOCTITE® 518 - Gasketing 235269 300 ml cart. 8 LOCTITE® Belt Dressing & Conditioner 226595 12 oz. aerosol 32

LOCTITE® 534 - Gasketing 731749 19 g stick 9 LOCTITE® Big Foot Acrylic Pedestrian Grade 1620706 1 gal. can grey 27

LOCTITE® 534 - Gasketing 640804 19 g stick 9 LOCTITE® Big Foot Acrylic Pedestrian Grade 1629598 1 gal. can black 27

LOCTITE® 534 - Gasketing 933726 19 g stick 9 LOCTITE® Big Foot Acrylic Primer 1620703 26

LOCTITE® 542 - Thread Sealing - Medium Strengh 630019 50 ml 6 LOCTITE® Big Foot Flexible Low Profile Exterior Grade 1354766 1 gal. can grey 27



no. pkg. Size page

LOCTITE® Big Foot Flexible Low Profile Exterior Grade 1352349 1 gal. can black 27 LOCTITE® Fixmaster Magna-Crete 235572 1 gal. kit 21

LOCTITE® Big Foot Heavy Duty Pedestrian Grade 1602121 1 gal. kit grey 27 LOCTITE® Fixmaster Magna-Crete 235573 5 gal. kit 21

LOCTITE® Big Foot Heavy Duty Pedestrian Grade 1629599 5 gal. pail grey 27 LOCTITE® Fixmaster Marine Chocking 1003139 3.5 gal. kit orange 24

LOCTITE® Big Foot Heavy Duty Pedestrian Grade 1602679 1 gal. kit black 27 LOCTITE® Fixmaster Marine Chocking 1003140 10 kg kit orange 24

LOCTITE® Big Foot Heavy Duty Pedestrian Grade 1592315 1 gal. kit safety yellow 27 LOCTITE® Fixmaster Marine Chocking 1005903 3.5 kg kit green 24

LOCTITE® Big Foot Metal Primer 1624642 26 LOCTITE® Fixmaster Marine Chocking 1543698 9.35 kg resin green 24

LOCTITE® Big Foot vehicular Grade 1602674 1 gal. kit grey 26 LOCTITE® Fixmaster Marine Chocking 1543699 0.65 kg hardener 24

LOCTITE® Big Foot vehicular Grade 1625203 5 gal. kit grey 26 LOCTITE® Fixmaster Metal Magic Steel 209681 4 oz. stick 19

LOCTITE® Big Foot vehicular Grade 1602678 1 gal. kit black 26 LOCTITE® Fixmaster Poxy Pak - Fast Cure Epoxy 235281 1 oz. syringe 14

LOCTITE® Big Foot Water-Based Primer/Sealer 1617851 26 LOCTITE® Fixmaster Rapid Rubber Repair 432774 400 ml kit 29

LOCTITE® Big Foot zero v.O.C. 233509 1 gal. kit grey 26 LOCTITE® Fixmaster Rapid Rubber Repair 428557 400 ml cart. 29

LOCTITE® Big Foot zero v.O.C. 1624641 1 gal. kit black 26 LOCTITE® Fixmaster Rapid Rubber Repair 428791 150 ml coaxial cart. 29

LOCTITE® Black Contact Adhesive 234930 12 LOCTITE® Fixmaster Rapid Rubber Repair Dispenser 1372751 40

LOCTITE® Bottle Hand Pump 608966 50 ml 40 LOCTITE® Fixmaster Rapid Rubber Repair Static Mixers 243335 40

LOCTITE® Bottle Hand Pump 88631 250 ml 40 LOCTITE® Fixmaster Steel Liquid 235617 1 lb. kit 19

LOCTITE® Bristle Roller 236388 40 LOCTITE® Fixmaster Steel Liquid 235618 4 lb. kit 19

LOCTITE® C5-A Copper Based Anti-Seize Lubricant 234263 8 oz. brushtop 30 LOCTITE® Fixmaster Steel Putty 219292 1 lb. kit 19

LOCTITE® C5-A Copper Based Anti-Seize Lubricant 525736 20 g stick 30 LOCTITE® Fixmaster Steel Putty 235642 4 lb. kit 19

LOCTITE® C5-A Copper Based Anti-Seize Lubricant 234196 12 oz. aerosol 30 LOCTITE® Fixmaster Steel Putty 235641 25 lb. kit 19

LOCTITE® C5-A Copper Based Anti-Seize Lubricant 160796 1 lb. brushtop 30 LOCTITE® Fixmaster Superior Metal Putty 209822 1 lb. kit 19

LOCTITE® Cold Galvanizing Compound 209802 15 oz. aerosol 33 LOCTITE® Fixmaster Superior Metal Putty 831721 4 kg kit 19

LOCTITE® Color Guard 338130 14.5 fl. oz. can red 33 LOCTITE® Fixmaster underwater Repair Epoxy 235487 4 oz. stick 18, 39

LOCTITE® Color Guard 338131 1 gal. can red 33 LOCTITE® Fixmaster Wet Surface Repair Putty 235602 1 lb. kit 18

LOCTITE® Color Guard 338133 14.5 fl. oz. can yellow 33 LOCTITE® Food Grade Anti-Seize 209749 8 oz. brushtop 31

LOCTITE® Color Guard 338134 1 gal. can yellow 33 LOCTITE® Food Grade Anti-Seize 234271 2 lb. can 31

LOCTITE® Color Guard 338127 14.5 fl. oz. can blue 33 LOCTITE® Form-A-Thread Stripped Thread Repair kit 236382 39

LOCTITE® Color Guard 338128 1 gal. can blue 33 LOCTITE® Gear, Chain & Cable Lubricant 81251 12 oz. aerosol 37

LOCTITE® Color Guard 338124 14.5 fl. oz. can 33 LOCTITE® Heavy Duty Anti-Seize 234347 9 oz. brushtop 31

LOCTITE® Color Guard 338125 1 gal. can black 33 LOCTITE® Heavy Duty Anti-Seize 209758 1.2 lb. brushtop 31

LOCTITE® Contact Adhesive 234923 12 LOCTITE® High Performance N-5000 High Purity Anti-Seize 234341 30

LOCTITE® Dual Manual Cartridge Applicator - Heavy Duty 1093981 40 LOCTITE® Instant Gasket 743912 90 ml 9

LOCTITE® E-120HP Hysol Epoxy Adhesive 237129 200 ml syringe 15 LOCTITE® Instant Gasket 743913 190 ml 9

LOCTITE® E-120HP Hysol Epoxy Adhesive 237130 400 ml dual syringe 15 LOCTITE® Insulating & Sealing Wrap 1212164 1"x10' tape - red 39

LOCTITE® E-120HP Hysol Epoxy Adhesive 237128 50 ml syringe 15 LOCTITE® Insulating & Sealing Wrap 1540599 1"x10' tape - black 39

LOCTITE® Electrical Contact & Parts Cleaner 209739 11 oz. aerosol 34 LOCTITE® Insulating & Sealing Wrap 14967556 2"x36' tape - black 39

LOCTITE® Fixmaster 4 Minute Epoxy 14 LOCTITE® Maintain Lube ML-11 Anti-Rust 852756 360 ml 37

LOCTITE® Fixmaster Aluminum Liquid 235614 1 lb. kit 18 LOCTITE® Manual Applicator 720228 40

LOCTITE® Fixmaster Aluminum Putty 235615 1 lb. kit 18 LOCTITE® Manual Cartridge Applicator - Heavy Duty 1093940 40

LOCTITE® Fixmaster Anchor Bolt Grout 1108885 20.7 fl. oz. dual cart. 25 LOCTITE® Marine Grade Anti-Seize 299175 8 oz. brushtop 31

LOCTITE® Fixmaster Concrete Repair Epoxy 39366 4 oz. stick 21 LOCTITE® Marine Grade Anti-Seize 275026 16 oz. brushtop 31

LOCTITE® Fixmaster Crack Filler NS 1108886 8.6 fl. oz. coaxial cart. 20 LOCTITE® Maxi-Coat 209750 12 oz. aerosol 33

LOCTITE® Fixmaster Crack Filler SL 1291113 8.6 fl. oz. coaxial cart. 20 LOCTITE® Maxi-Coat 209752 1 gal. can 33

LOCTITE® Fixmaster Deep Pour Grout 235637 5 gal. kit 25 LOCTITE® Maximum Strength Headline Adhesive 476035 12

LOCTITE® Fixmaster Etching Agent 28 LOCTITE® Mixer Blades 303596 26, 40

LOCTITE® Fixmaster Fast Cure Epoxy - Mixer Cups 631604 4 pack 0.12 fl. oz. cups 14 LOCTITE® Moly Dry Film Lubricant 233501 1.3 lb. can 37

LOCTITE® Fixmaster Fast Cure Epoxy - Mixer Cups 209717 Can of 10 0.12 fl. oz. cups 14 LOCTITE® Moly Dry Film Lubricant 226675 12 oz. aerosol 37

LOCTITE® Fixmaster Fast Cure Epoxy - Mixer Cups 209718 Can of 10 1 oz. cups 14 LOCTITE® Moly Paste 234227 30

LOCTITE® Fixmaster Fast Set Grout 2 gal. kit 20 LOCTITE® Moly-50 Anti-Seize 234246 30

LOCTITE® Fixmaster Fast Set Grout 1158518 2 gal. kit 25 LOCTITE® N-1000 High Purity Anti-Seize 234251 30

LOCTITE® Fixmaster Fast Set Steel Putty 235641 1 lb. kit 19 LOCTITE® N-5000 High Purity Anti-Seize 234280 30

LOCTITE® Fixmaster Flex 80 Putty 209821 1 lb. kit 23, 29 LOCTITE® N-7000 High Purity Anti-Seize 234288 30

LOCTITE® Fixmaster Flex 80 Putty 235611 6 lb. kit 29 LOCTITE® Natural Blue Biodegradable Cleaner & Degreaser 235501 4 fl. oz. bottle 35

LOCTITE® Fixmaster Flex Cleaner 28 LOCTITE® Natural Blue Biodegradable Cleaner & Degreaser 235502 24 fl. oz. spray bottle 35

LOCTITE® Fixmaster Flex Conveyor Belt Repair kit 235625 1 lb. kit 29 LOCTITE® Natural Blue Biodegradable Cleaner & Degreaser 209804 1 gal. bottle 35

LOCTITE® Fixmaster Floor Fill 235632 10 lb. kit 21 LOCTITE® Natural Blue Biodegradable Cleaner & Degreaser 235503 5 gal. pail 35

LOCTITE® Fixmaster Floor Fill 235633 40 lb. kit 21 LOCTITE® Nickel Anti-Seize 235028 8 oz. brushtop 31

LOCTITE® Fixmaster High Performance quartz 209669 42 lb. kit 21 LOCTITE® Nickel Anti-Seize 234296 12 oz. aerosol 31

LOCTITE® Fixmaster Instant Belt Repair 37719 1 lb. kit 28 LOCTITE® Nickel Anti-Seize 135543 1 lb. brushtop 31

LOCTITE® Fixmaster Instant Belt Repair 519469 1 lb. kit 28 LOCTITE® Non-Flammable Electrical Contact Cleaner 439223 14 oz. aerosol 34



no. pkg. Size page

LOCTITE® Nordbak Brushable Ceramic 978759 1 kg kit grey 23 LOCTITE® viper Lube High Performance Synthetic Grease 457457 14 oz. cart. 36

LOCTITE® Nordbak Brushable Ceramic 978758 2 kg kit grey 23 LOCTITE® viper Lube Clear High Performance Synthetic Grease 675961 3 oz. tube 37

LOCTITE® Nordbak Brushable Ceramic 1050263 1 kg kit white 23 LOCTITE® zinc Anti-Seize 233507 1 lb. can 31

LOCTITE® Nordbak Brushable Ceramic 1050599 2 kg kit white 23

LOCTITE® Nordbak Ceramic Tile Adhesive 1324544 20 lb. kit 22

LOCTITE® Nordbak Chemical Resistant Coating 209816 12 lb. kit 21, 22, 32

LOCTITE® Nordbak Combo Bead Wearing Compound 1324571 6 lb. kit 22

LOCTITE® Nordbak Fast Cure Pneu Wear 235599 6 lb. kit 22

LOCTITE® Nordbak Fast Cure Wearing Compound 235598 6 lb. kit 22

LOCTITE® Nordbak High Impact Wearing Compound 1327836 25 lb. kit 23

LOCTITE® Nordbak High Temperature Brushable Ceramic 1400739 1 kg kit 23

LOCTITE® Nordbak High Temperature Pneu-Wear 235622 25 lb. kit 22

LOCTITE® Nordbak Pneu-Wear Wearing Compound 978755 2 kg kit 23

LOCTITE® Nordbak Pneu-Wear Wearing Compound 979698 10 kg kit 23

LOCTITE® Nordbak Temperature Wearing Compound 235631 25 lb. kit 22

LOCTITE® Nordbak ultra High Temperature Pneu-Wear 235597 25 lb. kit 22

LOCTITE® Nordbak ultra High Temperature Wearing Compound 209816 11 lb. kit 22

LOCTITE® Nordbak ultra High Temperature Wearing Compound 235600 25 lb. kit 22

LOCTITE® Nordbak Wear Resistant 235626 1 lb. kit 23

LOCTITE® Nordbak Wear Resistant 209827 3 lb. kit 23

LOCTITE® Nordbak Wearing Compound 1324008 5 lb. kit 22

LOCTITE® Nordbak Wearing Compound 1323940 25 lb. kit 22

LOCTITE® ODC-Free Cleaner & Degreaser 231562 15 oz. aerosol 35

LOCTITE® ODC-Free Cleaner & Degreaser 135310 16 oz. pump spray 35

LOCTITE® ODC-Free Cleaner & Degreaser 230176 1 gal. can 35

LOCTITE® Orange Lotion Hand Cleaner Smooth Formula 419271 400 ml bottle 35

LOCTITE® Orange Lotion Hand Cleaner Smooth Formula 366943 400 ml bottle 35

LOCTITE® O-Ring Making kit 228171 38

LOCTITE® Phenolic Roller 303595 40

LOCTITE® Pipe Repair kit 209818 2''x6' (5x182 cm) tape 39

LOCTITE® Pipe Repair kit 269078 4''x12' (10x365 cm) tape 39

LOCTITE® Power Grad Industrial Construction Adhesive 1348376 190 ml pressurized can 15

LOCTITE® Power Grad Industrial Construction Adhesive 1210760 300 ml cart. 15

LOCTITE® Power Grad Industrial Construction Adhesive 1210759 825 ml cart. 15

LOCTITE® Primer for Color Guard 338138 1 gal. pail 32

LOCTITE® Pro Strength Parts Cleaner 234941 19 oz. aerosol 35

LOCTITE® Silver Grade Anti-Seize 199012 8 oz. brushtop 30

LOCTITE® Silver Grade Anti-Seize 525737 20 g stick 30

LOCTITE® Silver Grade Anti-Seize 135541 12 oz. aerosol 30

LOCTITE® Silver Grade Anti-Seize 235005 1 lb. brushtop 30

LOCTITE® Sprayable Ceramic Pneumatic Handgun 1175730 40

LOCTITE® Sprayable Ceramic Preheating Box 796993 40

LOCTITE® Superflex High Temp RTv Silicone Adhesive Sealant 1312042 White 300 ml cartridge 16

LOCTITE® Superflex High Temp RTv Silicone Adhesive Sealant 1311327 Clear 300 ml cartridge 16

LOCTITE® Superflex Red High Temp RTv Silicone Adhesive Sealant 40465 190 ml can 16

LOCTITE® Superflex Red High Temp RTv Silicone Adhesive Sealant 59675 300 ml cartridge 16

LOCTITE® Superflex Red High Temp RTv Silicone Adhesive Sealant 59630 80 ml tube 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 40464 Black 190 ml can 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 40466 White 190 ml can 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 40481 Clear 190 ml can 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 59375 Black 300 ml cartridge 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 59475 White 300 ml cartridge 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 59575 Clear 300 ml cartridge 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 59330 Black 80 ml tube 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 59430 White 80 ml tube 16

LOCTITE® Superflex RTv Silicone Adhesive Sealant 59530 Clear 80 ml tube. 16

LOCTITE® Tile Bond Red, High Temp RTv Silicone Adhesive Sealant 19163 Red 300 ml cart. 16

LOCTITE® viper Lube High Performance Synthetic Grease 457458 400 g can 36

LOCTITE® viper Lube High Performance Synthetic Grease 457456 3 oz. tube 36

prodUcT orderinginFormaTion


FlUid compaTibiliTy charTfor metal tHreaded fittings sealed witH loctite® sealantsliQUidS, SolUTionS & SUSpenSionS

Abrasive Coolant .............. Acetaldehyde ..................... Acetate Solvents .............. Acetimide .......................... Acetc Acid ......................... Acetic Acid ........................ Acetic Acid - Glacial ......... Acetic Anhydride ............. Acetone ............................. Acetyl Chloride ................. Acetylene (Liquid Phase) Acid Clay ........................... Acrylic Acid ....................... Acrylonitrile ...................... Activated Alumina ........... Activated Carbon ............. Activated Silica ................. Alcohol-Allyl ..................... Alcohol-Amyl .................... Alcohol-Benzyl ......... Alcohol-Butyl .................... Alcohol-Ethyl ..................... Alcohol-Furfuryl ............... Alcohol-Hexyl ................... Alcohol-lsopropyl ............. Alcohol-Methyl ................. Alcohol-Propyl .................. Alum-Ammonium ............. Alum-Chrome ................... Alum-Potassium ............... Alum-Sodium .................... Alumina ............................. Aluminum Acetate ........... Aluminum Bicarbonate ... Aluminum Bifluoride ....... Aluminum Chloride ......... Aluminum Sulfate ............ Ammonia Anhydrous ....... Ammonia Solutions ......... Ammonium Bisulfite ....... Ammonium Borate .......... Ammonium Bromide ....... Ammonium Carbonate .... Ammonium Chloride ....... Ammonium Chromate ..... Ammonium Fluoride ....... Ammonium Fluorosilicate Ammonium Formate ....... Ammonium Hydroxide .... Ammonium Hyposulfite .. Ammonium Iodide ........... Ammonium Molybdate ... Ammonium Nitrate .......... Ammonium Oxalate ......... Ammonium Persulfate .... Ammonium Phosphate .... Ammonium Picrate .......... Ammonium Sulfate .......... Ammonium Sulfate Scrubber ............................ Ammonium Sulfide .......... Ammonium Thiocyanate . Amyl Acetate .................... Amyl Amine ...................... Amyl Chloride ................... Aniline ............................... Aniline Dyes ...................... Anodizing Bath ................. Antichlor Solution ............ Antimony Acid Salts ........ Antimony Oxide ...............

Antioxidant Gasoline ....... Aqua Regia ........................ Argon ................................. Armeen .............................. Arochlor ............................ Aromatic Gasoline ........... Aromatic Solvents ............ Arsenic Acid ...................... Asbestos Slurry ................ Ash Slurry .......................... Asphalt Emulsions ........... Asphalt Molten .................

Bagasse Fibers .................. Barium Acetate ................ Barium Carbonate ............ Barium Chloride ............... Barium Hydroxide ............ Barium Sulfate ................. Battery Acid ...................... Battery Diffuser juice ...... Bauxite (See Alumina) .... Bentonite .......................... Benzaldehyde ................... Benzene ............................ Benzene Hexachloride .... Benzene in Hydrochloric Acid .................................... Benzoic Acid ..................... Benzotriazole .................... Beryllium Sulfate ............. Bicarbonate Liquor .......... Bilge Lines ........................ Bleach Liquor ................... Bleached Pulps ................. Borax Liquors ................... Boric Acid .......................... Brake Fluids ...................... Brine Chlorinated ............. Brine (Cold) ....................... Bromine Solution ............... †Butadiene .......................... Butyl Acetate .................... Butyl Alcohol .................... Butyl Amine ...................... Butyl Cellosolve ................ Butyl Chloride ................... Butyl Ether (Dry) .............. Butyl Lactate ..................... Butyral Resin .................... Butyraldehyde .................. Butyric Acid ......................

Cadmium Chloride ........... Cadmium Plating Bath .... Cadmium Sulfate ............. Calcium Acetate ............... Calcium Bisulfate ............. Calcium Carbonate .......... Calcium Chlorate .............. Calcium Chloride .............. Calcium Chloride Brine ... Calcium Citrate ................. Calcium Ferrocyanide ...... Calcium Formate .............. Calcium Hydroxide .......... Calcium Lactate ................ Calcium Nitrate ................ Calcium Phosphate .......... Calcium Silicate ................ Calcium Sulfamate ........... Calcium Sulfate ................ Calcium Sulfite ................. Camphor ............................ Carbitol .............................. Carbolic Acid (Phenol) ..... Carbon Bisulfide .............. Carbon Black ..................... Carbon Tetrachloride ....... Carbonic Acid ................... Carbowax .......................... Carboxymethyl Cellulose Carnauba Wax .................. Casein ................................ Casein Water Paint ........... Celite ................................. Cellosolve .......................... Cellulose Pulp ................... Cellulose Xanthate ........... Cement Dry/Air Blown ....

Cement Grout ................... Cement Slurry ................... Ceramic Enamel ............... Ceric Oxide ....................... Chalk .................................. Chemical Pulp ................... Chestnut Tanning ............. China Clay ......................... Chloral Alcoholate ........... Chloramine ....................... Chlorinated Hydrocarbons ................... Chlorinated Paperstock ... Chlorinated Solvents ....... Chlorinated Sulphuric Acids .................................. Chlorinated Wax ............... Chlorine Dioxide .............. Chlorine Liquid ................. Chlorine (Dry) ................... Chloroacetic Acid ............. Chlorobenzene (Dry) ....... Chloroform (Dry) .............. Chloroformate Methyl ..... Chlorosulfonic Acid ......... Chrome Acid Cleaning ..... Chrome Liquor ................. Chrome Plating Bath ....... Chromic Acid 10% ........... Chromic Acid 50% (Cold) Chromic Acid 50% (Hot) Chromium Acetate ........... Chromium Chloride ......... Chromium Sulfate ............ Classifier ........................... Clay .................................... Coal Slurry ........................ Coal Tar ............................. Cobalt Chloride ................ Copper Ammonium Formate ............................. Copper Chloride ............... Copper Cyanide ................ Copper Liquor ................... Copper Naphthenate ....... Copper Plating (Acid Process) ................... Copper Plating (Alk. Process) .................... Copper Sulfate .................. Core Oil ............................. Corundum ......................... Creosote ........................... Creosote-Cresylic Acid .... Cyanide Solution .............. Cyanuric Chloride ............ Cyclohexane ..................... Cylinder Oils .....................

De-Ionized Water ............. De-Ionized Water Low Conductivity ..................... Detergents ........................ Developer, Photographic . Dextrin .............................. Diacetone Alcohol ........... Diammonium Phosphate . Diamylamine .................... Diatomaceaus EarthSlurry ................................. Diazo Acetate ................... Dibutyl Phthalate ............ Dichlorophenol ................. Dichloro Ethyl Ether ........ Dicyandamide ................... Dielectric Fluid ................ Diester Lubricants ............ Diethyl Ether Dry ............. Diethyl Sulfate .................. Diethylamine ................... Diethylene Glycol ............. Diglycolic Acid .................. Dimethyl Formamide ....... Dimethyl Sulfoxide .......... Dioxane Dry ...................... Dioxidene .......................... Dipentene-Pinene ............ Diphenyl ............................ Distilled Water (Industrial) ........................

Dowtherm ......................... Drying Oil .......................... Dust-Flue (Dry) ................. Dye Liquors .......................

Emery-Slurry ..................... Emulsified Oils ................. Enamel Frit Slip ................ Esters General .................. Ethyl Acetate .................... Ethyl Alcohol ..................... Ethyl Amine ...................... Ethyl Bromide ................... Ethyl Cellosolve ................ Ethyl Cellosolve Slurry ..... Ethyl Formate ................... Ethyl Silicate ..................... Ethylene Diamine ............. Ethylene Dibromide ......... Ethylene Dichloride ......... Ethylene Glycol ................ Ethylenediamine Tetramine ..........................

Fatty Acids ........................ Fatty Acids Amine ........... Fatty Alcohol ..................... Ferric-Floc ......................... Ferric Chloride .................. Ferric Nitrate .................... Ferric Sulfate .................... Ferrocence-Oil Sol ........... Ferrous Chloride .............. Ferrous Oxalate ................ Ferrous Sulfate 10% ........ Ferrous Sulfate (Sat) ........ Fertilizer Sol ...................... Flotation Concentrates .... Fluoride Salts .................... Fluorine, Gaseous or Liquid ................................. Fluorolube ......................... Fluosilic Acid .................... Flux Soldering .................. Fly Ash Dry ........................ Foam Latex Mix ................ Foamite ............................. Formaldehyde (Cold) ....... Formaldehyde (Hot) ........ † Formic Acid (Dil Cold) ..... Formic Acid (Dil Hot) ...... † Formic Acid (Cold) ........... Formic Acid (Hot) ........... † Freon ................................. † Fuel Oil .............................. Fuming Nitric Red ........... Fuming Sulfuric ............... Fuming Oleum ................. Furfural ..............................

Gallic Acid ......................... Gallium Sulfate ................. Gasoline-Acid Wash ......... Gasoline-Alk. Wash .......... Gasoline Aviation ............. Gasoline Copper Chloride ............................. Gasoline Ethyl ................... Gasoline Motor ................. Gasoline Sour ................... Gasoline White ................. Gluconic Acid ................... Glue-Animal Gelatin ........ Glue-Plywood ................... Glutamic Acid ................... Glycerine Lye-Brine ........ Glycerol ............................. Glycine ............................... Glycine Hydrochloride ..... Glycol Amine .................... Glycolic Acid ..................... Glyoxal ............................... Gold Chloride ................... Gold Cyanide .................... Granodine ......................... Grape Pomace Graphite .. Grease Lubricating ........... Green Soap ....................... Grinding Lubricant ........... Grit Steel ...........................

Gritty Water ...................... Groundwood Stock .......... GRS Latex .......................... Gum Paste ......................... Gum Turpentine ............... Gypsum .............................

Halane Sol ......................... Halogen Tin Plating ......... Halowax ............................ Harvel-Trans Oil ................ Heptane ............................. Hexachlorobenzene ......... Hexadiene ......................... Hexamethylene Tetramine .......................... Hexane .............................. Hydrazine .......................... Hydrazine Hydrate ........... Hydrobromic Acid ............ Hydrochloric Acid ............ Hydrocyanic Acid ............. Hydrofluoric Acid .............. Hydrogen Peroxide (Dil) . Hydrogen Peroxide (Con) †Hydroponic Sol ................. Hydroquinone .................. Hydroxyacetic Acid .......... Hypo .................................. Hypochlorous Acid ..........

Ink ...................................... Ink in Solvent-Printing .... Iodine in Alcohol .............. Iodine-Potassium Iodide . Iodine Solutions ............... Ion Exchange Service ...... Ion Exclusion Glycol ........ Irish Moss Slurry .............. Iron Ore Taconite ............. Iron Oxide ......................... Isobutyl Alcohol ............... Isobutyraldehyde ............. Isooctane ........................... Isopropyl Alcohol ............. Isocyanate Resin .............. Isopropyl Acetate ............. Isopropyl Ether ................. Itaconic Acid .....................

jet Fuels ............................. jeweler’s Rouge ................ jig Table Slurry .................

kaolin-China Clay ............. kelp Slurry ........................ kerosene ........................... kerosene Chlorinated ...... ketone ...............................

Lacquer Thinner ............... Lactic Acid ......................... Lapping Compound ......... Latex-Natural .................... Latex-Synthetic ................. Latex Synthetic Raw ........ Laundry Wash Water ....... Laundry Bleach ................. Laundry Blue .................... Laundry Soda .................... Lead Arsenate ................... Lead Oxide ........................ Lead Sulfate ...................... Lignin Extract ................... Lime Slaked ...................... Lime Sulfur Mix ................ Liquid Ion Exchange ........ Lithium Chloride .............. LOX (Liquid O2) ................. Ludox ................................. Lye ......................................

Machine Coating Color ... Magnesite Slurry .............. Magnesite ......................... Magnesium Bisulfite ....... Magnesium Carbonate .... Magnesium Chloride ....... Magnesium Hydroxide .... Magnesium Sulfate ..........

Maleic Acid ....................... Maleic Anhydride ............. Manganese Chloride ........ Manganese Sulfate .......... Melamine Resin ............... Menthol ............................. Mercaptans ....................... Mercuric Chloride ............ Mercuric Nitrate ............... Mercury ............................. Mercury Dry ...................... Methane ............................ Methyl Alcohol ................. Methyl Acetate ................ Methyl Bromide ............... Methyl Carbitol ............... Methyl Cellosolve ........... Methyl Chloride ............... Methyl Ethyl ketone ........ Methyl Isobutyl ketone ... Methyl Lactate ................. Methyl Orange ................ Methylamine .................... Methylene Chloride ......... Mineral Spirits .................. Mixed Acid, Nitric/Sulfuric .............................. Monochloracetic Acid ...... Morpholine ....................... Mud ....................................

Nalco Sol ........................... Naphtha ............................ Naphthalene ..................... Naval Stores Solvent ...... Nematocide ..................... Neoprene Emulsion ......... Neoprene Latex ................ Nickel Acetate .................. Nickel Ammonium Sulfate ............................... Nickel Chloride ................. Nickel Cyanide .................. Nickel Fluoborate ............. Nickel Ore Fines ............... Nickel Plating Bright ....... Nickel Sulfate ................... Nicotinic Acid ................... Nitrate Sol ......................... Nitration Acid(s) ............. Nitric Acid ........................ Nitric Acid 10% ................ Nitric Acid 20% ............... †Nitric Acid Anhydrous ..... Nitric Acid Fuming .......... Nitro Aryl Sulfonic Acid .. Nitrobenezene-Dry .......... Nitrocellulose ................... Nitrofurane ...................... Nitroguanidine ................. Nitroparaffins-Dry ............ Nitrosyl Chloride ............. Norite Carbon .................. Nuchar ...............................

Oakite Compound ............ Oil, Creosote .................... Oil, Emulsified .................. Oil, Fuel ............................. Oil, Lubricating ................. Oil, Soluble ....................... Oleic Acid (Hot) ............... Oleic Acid (Cold) ............. Ore Fines-Flotation .......... Ore Pulp ............................ Organic Dyes .................... Oxalic Acid (Cold) ............ Ozone (Wet) .....................

Paint-Linseed Base ........... Paint-Water Base .............. Paint-Remover-Sol. Type . Paint-vehicles ................... Palmitic Acid ..................... Paper Board Mill Waste .. Paper Coating Slurry ....... Paper Pulp ......................... Paper Pulp with Amun .... Paper Pulp with Dye ........ Paper Pulp, Bleached .......

LOCTITE® product numbers in red are worldwide or application-specific products.(This is a list of chemical stability only. It does not constitute approval for use in the processing of food, drugs, cosmetics, pharmaceuticals and ingestible chemicals.)LOCTITE® brand sealants are not recommended for use in pure oxygen or chlorine environments or in conjunction with strong oxidizing agents: an explosive reaction can result.

legend: All LOCTITE® Anaerobic Seal-

ants are Compatible, including # 242, 243, 542, 545, 565, 567, 569, 571, 572, 577, 580, 592† use LOCTITE® # 270, 271, 277, 554

Not Recommended < 10% (same as )

> 10% (same as †) < 5% (same as )

> 5% (same as †) use LOCTITE® # 242, 243,

290, 565


Gold Cyanide ................ Iron-Acid ...................... Lead-Fluoro ................. Nickel Bright ............... Platinum ...................... Silver-Cyanide ............. Tin-Acid ........................ Tin Alk. Barrel ............... zinc Acid ....................... zinc Alk. Cyanide ........ Polyacrylonitrile Slurry ... Polypentek ........................ Polysulfide Liquor ........... Polyvinyl Acetate Slurry . Polyvinyl Chloride ........... Porcelain Frit ................... Potash .............................. Potassium Acetate ........... Potassium Alum. Sulfate . Potassium Bromide .......... Potassium Carbonate ...... Potassium Chlorate .......... Potassium Chloride Sol. .. Potassium Chromate ....... Potassium Cyanide Sol. ... Potassium Dichromate .... Potassium Ferricyanide ... Potassium Hydroxide ..... Potassium Iodide ............ Potassium Nitrate ............ Potassium Perchlorate .... Potassium Permanganate ................. Potassium Persulfate ...... Potassium Phosphate ..... Potassium Silicate ........... Potassium Sulfate ............ Potassium Xanthate ......... Press Board Waste .......... Propionic Acid ................. Propyl Alcohol ................. Propyl Bromide ................ Propylene Glycol .............. Pumice .............................. Pyranol .............................. Pyridine ............................ Pyrogallic Acid .................. Pyrogen Free Water ......... Pyrole ................................. Pyromellitic Acid ..............

quebracho Tannin ............

Rag Stock Bleached ......... Rare Earth Salts ................ Rayon Acid Water ............ Rayon Spin Bath ............... Rayon Spin Bath Spent .. Resorcinol ......................... River Water ....................... Road Oil ............................. Roccal ................................ Rosin-Wood ....................... Rosin in Alcohol ............... Rosin Size .......................... Rubber Latex ...................

Safrole ............................... Salt Alkaline ..................... Salt Electrolytic ................ Salt Refrg. ........................ Sand-Air Blown Slurry ..... Sand-Air Phosphatic ........ Sea Coal ............................. Sea Water .......................... Selenium Chloride ...........

Sequestrene ...................... Sewage .............................. Shellac ............................... Shower Water ................... Silica Gel ........................... Silica Ground .................... Silicone Tetrachloride ....... Silicone Fluids .................. Silver Cyanide .................... Silver Iodide-Aqu. ............. Silver Nitrate .................... Size Emulsion ................... Skelly Solve E, L ................ Slate to 400 Mesh ............ Soap Lye ............................ Soap Solutions (Stearates) ......................... Soap Stone Air Blown ...... Soda Pulp .......................... Sodium Acetate ................ Sodium Acid Fluoride ...... Sodium Aluminate ........... Sodium Arsenate .............. Sodium Benzene Sulfonate ........................... Sodium Bichromate .......... Sodium Bisulfite ................ Sodium Bromide ............... Sodium Carbonate ............ Sodium Chlorate .............. Sodium Chlorite ............... Sodium Cyanide ............... Sodium Ferricyanide ....... Sodium Formate ............... Sodium Glutamate ............ Sodium Hydrogen Sulfate Sodium Hydrosulfite ........ Sodium Hydrosulfide ....... Sodium Hydrochloride .... Sodium Hydroxide ........... Sodium Hydro. 20% (Cold) ........... Sodium Hydro. 20% (Hot) ........... †Sodium Hydro. 50% (Cold) .......... †Sodium Hydro. 50% (Hot) ............ Sodium Hydro. 70% (Cold) .......... †Sodium Hydro. 70% (Hot) ............. Sodium Hypochlorite ....... Sodium Lignosulfonate ... Sodium Metasilicate ........ Sodium Molten ................. Sodium Nitrate .................. Sodium Nitrite-Nitrate ..... Sodium Perborate ............ Sodium Peroxide .............. Sodium Persulfate ............. Sodium Phosphate-Mono Sodium Phosphate-Tri ...... Sodium Potassium Chloride .............................. Sodium Salicylate ............. Sodium Sesquicarbonate . Sodium Silicate .................. Sodium Silcofluoride ........ Sodium Stannate ............... Sodium Sulfate .................. Sodium Sulfide .................. Sodium Sulfite ................... Sodium Sulfhydrate .......... Sodium Thiocyanate ......... Sodium Thiosulfate ...........

Sodium Tungstate ............. Sodium Xanthate .............. Solox-Denat. Ethanol ........ Soluble Oil ........................ Solvent Naphthas ............. Sorbic Acid ......................... Sour Gasoline .................... Soybean Sludge-Acid ........ Spensol Solution ............. Stannic Chloride ............... Starch ................................. Starch Base ....................... Stearic Acid ....................... Steep Water ...................... Sterilization Steam .......... Stillage Distillers .............. Stoddard Solvent ............. Styrene .............................. Styrene Butadiene Latex . Sulfamic Acid ................... Sulfan-Sulfuric Anhydride Sulfathiazole ..................... Sulfite Liquor .................... Sulfite Stock ...................... Sulfonated Oils ................ Sulfones ........................... Sulfonic Acids ................... Sulfonyl Chloride ............. Sulfur Slurry ..................... Sulfur Solution ................. in Carbon Disulfide .......... Sulphuric Acid 0-7% ....... †Sulphuric Acid 7-40% ..... †Sulphuric Acid 40-75% .. †Sulphuric Acid 75-95% ... Sulphuric Acid 95-100% Sulphurous Acid ............. †Sulfuryl Chloride ............. Surfactants ........................ Synthetic Latex .................

Taconite-Fines ................. Talc Slurry ........................ Tankage Slurry ................. Tannic Acid (Cold) .......... †Tamin ................................. Tar & Tar Oil ...................... Tartaric Acid .................... Television Chemicals ...... Tergitol ............................. Terpineol .......................... Tetraethyl Lead ................. Tetrahydrofuran ............... Tetranitromethane ........... Textile Dyeing .................. Textile Finishing Oil ........ Textile Printing Oil ........... Thiocyanic Acid ................ Thioglycollic Acid ............. Thionyl Chloride ............... Thiophosphoryl Chloride Thiourea ........................... Thorium Nitrate .............. Thymol .............................. Tin Tetrachlorida .............. Tinning Sol. DuPont ......... Titania Paper Coating ..... Titanium Oxide Slurry ..... Titanium Oxy Sulfate ....... Titanium Sulfate ............... Titanium Tetrachloride ... Toluol ................................ Toluene .............................. p-Toluene Sulfonic Acid ... †Transil Oil .......................... Trichloracetic Acid ...........

Paper Pulp, Bleached-Washed ............. Paper Pulp Chlorinated ... Paper Groundwood .......... Paper Rag .......................... Paper Stocks, Fine ............ Paradichlorobenezene ..... Paraffin Molten ............... Paraffin Oil ........................ Paraformaldehyde ........... Pectin Solution Acid ........ Pentachlorethane ............. PentaerythritoI Sol. .......... Perchlorethylene (Dry) .... Perchloric Acid ................. Perchloromethyl Mercaptan ......................... Permanganic Acid ............ Persulfuric Acid ................ Petroleum Ether ............... Petroleum jelly ................. Phenol Formaldehyde Resins ............................... Phenol Sulfonic Acid ....... Phenolic Glue ................... Phloroglucinol .................. Phosphate Ester ............... Phosphatic Sand ............... Phosphoric Acid 85% (Hot) ................. Phosphoric Acid 85% (Cold) .............. †Phosphoric Acid 50% (Hot) ............... †Phosphoric Acid 50% (Cold) .............. †Phosphoric Acid 10% (Cold) .............. Phosphoric Acid 10% (Hot) ................. †Phosphorous Molten ....... Phosphotungstic Acid ..... Photographic Sol. ............. Phthalic Acid ..................... Phytate .............................. Phytate Salts ..................... Pickling Acid, Sulfuric ..... Picric Acid Solutions ........ Pine Oil Finish .................. plating Sol. as follows: Brass Cyanide .............. Bronze-Cyanide .......... Chromium & Cadmium Cyanide ......................... Cobalt Acid .................. Copper Acid ................. Copper Alk. ...................

Trichlorethane 1,1,1 .......... Trichlorethylene .............. Trichlorethylene-Dry ........ Tricresyl Phosphate .......... Triethanolamine ................ Triethylene Glycol ............. Trioxane ............................. Tungstic Acid .................... Turpentine ..........................

uCON Lube ....................... udylite Bath-Nickel ........... undecylenic Acid .............. unichrome Sol. Alk. ......... uranium Salts ................... uranyl Nitrate ................... uranyl Sulfate .................... urea Ammonia Liquor .....

vacuum to 100 Micron .... vacuum below 100 Micron ........................ vacuum Oil ....................... vanadium Pentoxide Slurry .................................. varnish .............................. varsol-Naphtha Solvent ... versene ............................. vinyl Acetate Dry orChloride Monomer ............ vinyI Chloride Latex Emul .................................... vinyl Resin Slurry ............. viscose .............................. vortex-Hydroclone ............

Water-Acid – Below pH7 .. Water pH7 to 8 .................. Water Alkaline – Over pH8 ............................ Water Mine Water ............. Water Potable .................... Water River ........................ Water Sandy ....................... Water “White” – Low pH . Water “White” – High pH Wax .................................... Wax Chlorinated ................ Wax Emulsions .................. Weed killer Dibromide ..... Weisberg Sulfate Plating . Wood Ground Pulp ............ Wort Lines ..........................

X-Ray Developing Bath .... Xylene .................................

zelan ................................... zeolite Water ..................... zinc Acetate ...................... zinc Bromide ..................... zinc Chloride .................... zinc Cyanide-Alk. ............. zinc Fines Slurry ............... zinc Flux Paste .................. zinc Galvanizing ............... zinc Hydrosulfite............... zinc Oxide in Water .......... zinc Oxide in Oil ............... zinc Sulfate ........................ zincolate ........................... zirconyl Nitrate ................. zirconyl Sulfate .................

Acetylene .......................... Acid & Alkali vapors ........ Air ...................................... Amine ................................ Ammonia ............................

Butane ............................... Butadiene Gas/Liquid ..... Butylene Gas/Liquid ........ By-Product Gas (Dry) ........

Carbon Dioxide ................ Carbon Disulfide .............. Carbon Monoxide ............ Chloride (Dry) ................... Chlorine (Dry) ................... Chlorine (Wet) .................. Coke-Oven Gas (Cold) ...... Coke-Oven Gas (Hot)....... †Cyanogen Chloride ........... Cyanogen Gas ...................

Ethane ................................ Ether-see Diethyl Ether .... Ethylene ............................ Ethylene Oxide . ................

Freon (11-12-21-22) ........... †Furnace Gas (Cold) ......... Furnace Gas (Hot) .......... †

Gas Drip Oil ...................... Gas Flue ........................... Gas Manufacturing .......... Gas Natural ......................

Helium .............................. Hydrogen Gas – Cold ....... Hydrogen Chloride ......... Hydrogen Cyanide .......... Hydrogen Sulfide –Wet & Dry ..........................

Isobutane ..........................

Methane ........................... Methyl Chloride ...............

Natural Gas – Dry ............ Nitrogen Gas ................... Nitrous Oxide ..................

Oil-Solvent vapor ............. Oxygen .............................. Ozone ...............................

Producer Gas 50 PSI ........ Propane ............................ Propylene .........................

Steam High Pressure(≥ 70 psi) ........................... Steam Low Pressure (≤ 70 psi) ........................... Sulfur Dioxide ................... Sulfur Dioxide Dry .......... Sulfur Trioxide Gas ......... Sulfuric Acid vapor ..........

NOTE: a). The above information does not constitute a recommendation of sealant use. It is intended only as a guide for consideration by the purchaser with the expectation of favorable confirming test results. It is impossible to test sealant reaction with the multitude of chemicals in existence; therefore, compatibility has been estimated based on a wide variety of customer experience. b). With the stringent action of such chemicals as Freon®, strong cold acids and caustics, thorough evaluation is suggested. Sealing of hot corrosive chemicals is not recommended. c). Contact Henkel Corporation for use with chemicals not covered by this information. Listings in italics are trademarks or registered trademarks for chemicals of corporations other than Henkel.

LOCTITE® product numbers in red are worldwide or application-specific products.(This is a list of chemical stability only. It does not constitute approval for use in the processing of foods, drugs, cosmetics, pharmaceuticals and ingestible chemicals.)LOCTITE® sealants are not recommended for use in pure oxygen or chlorine environments or in conjunction with strong oxidizing agents, an explosive reaction can result.

The data contained herein are furnished for information only and are believed to be reliable. We cannot assume res-ponsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such pre-cautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.In light of the foregoing, HENkEL CORPORATION SPECIFICALLy DISCLAIMS ALL WARRANTIES OF MERCHANTABILITy OR FITNESS FOR A PARTICuLAR PuRPOSE ARISING FROM SALE OR uSE OF henkel CORPORATION’S PRODuCTS. Henkel CORPORATION SPECIFICALLy DISCLAIMS ANy LIABILITy FOR CONSEquENTIAL OR INCIDENTAL DAMAGES

OF ANy kIND, INCLuDING LOST PROFITS. The discussion herein of various processes or compositions is not to be interpreted as a representation that they are free from domination of patents owned by others or as a license under any henkel CORPORATION patents which may cover such processes or compositions. We recommend that each pro-spective user test the proposed application to determine its suitability for the purposes intended prior to incorpora-tion to determine its suitability for manufacturing process using this data as a guide. This product may be covered by one or more united States or foreign patents or patent application.

FlUid compaTibiliTy charTfor metal tHreaded fittings sealed witH loctite® sealantsliQUidS, SolUTionS & SUSpenSionS

legend: All LOCTITE® Anaerobic Seal-

ants are Compatible, including # 242, 243, 542, 545, 565, 567, 569, 571, 572, 577, 580, 592† use LOCTITE® # 270, 271, 277, 554

Not Recommended < 10% (same as )

> 10% (same as †) < 5% (same as )

> 5% (same as †) use LOCTITE® # 242, 243,

290, 565


Acetimide ............................ 1Acetic Acid, 10% ................ 3Acetic Acid, Glacial ............ 3Acetic Anhydride .............. 1Acetone .............................. 3Acetyl Chloride ................... 1Acetylene, Liquid Phase .... 1Acid Clay ............................. 1Acrylic Acid ......................... 1Acrylonitrile ....................... 1Activated Alumina ............. 1Activated Carbon ............... 1Activated Silica ................... 1Alcohol, Allyl ...................... 2Alcohol, Amyl ..................... 2Alcohol, Benzyl .................. 2Alcohol, Butyl ..................... 2Alcohol, Ethyl...................... 2Alcohol, Furfuryl ................ 2Alcohol, Hexyl ................... 2Alcohol, lsopropyl .............. 1Alcohol, Methyl ................. 3Alcohol, Propyl ................... 1Alum, Ammonium .............. 1Alum, Chrome .................... 1Alum, Potassium ................ 1Alum, Sodium ..................... 1Alumina .............................. 1Aluminum Acetate ............. 1Aluminum Bicarbonate ..... 1Aluminum Bifluoride ......... 1Aluminum Chloride ........... 1Aluminum Sulfate .............. 1Ammonia, Anhydrous ...... 3Ammonia Solutions, 20% ................... 1Ammonium Bisulfite, 20% ..................... 1Ammonium Borate ........... 1Ammonium Bromide ......... 1Ammonium Carbonate ...... 1Ammonium Chloride ........ 1Ammonium Chromate ....... 1Ammonium Fluoride.......... 1Ammonium Fluorosilicate 1Ammonium Formate ......... 1Ammonium Hydroxide, 20% ................ 1Ammonium Hyposulfite .... 1Ammonium Iodide ............ 1Ammonium Molybdate .... 1Ammonium Nitrate ........... 1Ammonium Oxalate .......... 1Ammonium Persulfate ...... 1Ammonium Phosphate ..... 1Ammonium Picrate ............ 1Ammonium Sulfate, 10% .. 1Ammonium Sulfate Scrubber ............................. 1Ammonium Sulfide ............ 1Ammonium Thiocyanate ... 1Amyl Acetate ...................... 2Amyl Amine ........................ 1Amyl Chloride ..................... 1Aniline ................................. 2Aniline Dyes ........................ 1Anodizing Bath ................... 1Antichlor Solution .............. 1Antimony Acid Salts .......... 1Antimony Oxide ................. 1Antioxidant Gasoline ........ 1Aqua Regia, 20% .............. 1Argon ................................... 1Armeen ................................ 1Arochlor ............................. 1Aromatic Gasoline ............. 1Aromatic Solvents .............. 2Arsenic Acid ........................ 1

Asbestos Slurry................... 1Ash Slurry ............................ 1Asphalt Emulsions ............. 1Asphalt, Molten .................. 1

Bagasse Fibers .................... 1Barium Acetate .................. 1Barium Carbonate .............. 1Barium Chloride ................. 1Barium Hydroxide .............. 1Barium Sulfate .................... 1Battery Acid ........................ 1Battery Diffuser juice ........ 1Bauxite (see Alumina) ....... 1Bentonite ............................ 1Benzaldehyde ..................... 1Benzene ............................... 2Benzene Hexachloride ...... 1Benzene in HydrochloricAcid, 20%. ........................... 1 Benzoic Acid ...................... 1Benzotriazole ..................... 1Beryllium Sulfate ............... 1Bicarbonate Liquor ............ 1Bilge Lines ......................... 1Bleach Liquor...................... 1Bleached Pulps ................... 3Borax Liquors .................... 3Boric Acid ........................... 1Brake Fluids ........................ 1Brine, Chlorinated ............. 1Brine, Cold .......................... 1Bromine Solution ............... 3Butadiene ........................... 1Butyl Acetate ...................... 2Butyl Alcohol ...................... 2Butyl Amine ....................... 2Butyl Cellosolve .................. 2Butyl Chloride ..................... 1Butyl Ether, Dry .................. 1Butyl Lactate ....................... 1Butyral Resin ..................... 1Butyraldehyde .................... 1Butyric Acid ........................ 1

Cadmium Chloride ............. 1Cadmium Plating Bath ...... 1Cadmium Sulfate................ 1Calcium Acetate ................ 1Calcium Bisulfate .............. 1Calcium Carbonate ............ 1Calcium Chlorate ................ 1Calcium Chloride ................ 1Calcium Chloride Brine ..... 1Calcium Citrate ................... 1Calcium Ferrocyanide ....... 1Calcium Formate ................ 1Calcium Hydroxide ............ 1Calcium Lactate .................. 1Calcium Nitrate .................. 1Calcium Phosphate ............ 1Calcium Silicate .................. 1Calcium Sulfamate ............. 1Calcium Sulfate .................. 1Calcium Sulfite .................. 1Camphor .............................. 1Carbitol ............................... 1Carbolic Acid, Phenol ....... 1Carbon Bisulfide................. 1Carbon Black ....................... 1Carbon Tetrachloride ......... 1Carbonic Acid ..................... 1Carbowax ............................ 1Carboxymethyl Cellulose .. 1Carnauba Wax .................... 1Casein .................................. 1Casein, Water Paint............ 1Celite.................................... 1Cellosolve ............................ 2Cellulose Pulp ..................... 1Cellulose Xanthate ............ 1Cement, Dry/Air Blown ..... 1Cement Grout ..................... 1Cement Slurry ..................... 1Ceramic Enamel ................. 1Ceric Oxide ........................ 1Chalk .................................... 1Chemical Pulp ..................... 1Chestnut Tanning .............. 1China Clay .......................... 1Chloral Alcoholate ............ 1Chloramine ........................ 1

Chlorinated Hydrocarbons 2Chlorinated Paperstock ..... 1Chlorinated Solvents ......... 2Chlorinated Sulphuric Acids ................................... 2Chlorinated Wax ................ 1Chlorine Dioxide ................ 1Chlorine, Liquid ................. 1Chlorine, Dry ..................... 1Chloroacetic Acid .............. 2Chlorobenzene, Dry .......... 1Chloroform, Dry ................ 1Chloroformate Methyl . ..... 1Chlorosulfonic Acid .......... 1Chrome Acid Cleaning, 20% ..................................... 1Chrome Liquor, 20% .......... 1Chrome Plating Bath, 20% 1Chromic Acid, 10% ............ 2Chromic Acid, 50% Cold .. 3Chromic Acid, 50% Hot .... 3Chromium Acetate ............ 1Chromium Chloride .......... 1Chromium Sulfate .............. 1Classifier.............................. 1Clay ...................................... 1Coal Slurry ......................... 1Coal Tar................................ 1Cobalt Chloride .................. 1Copper Ammonium Formate .............................. 1Copper Chloride ................. 1Copper Cyanide . ................ 1Copper Liquor .................... 1Copper Naphthenate ........ 1Copper Plating, Acid Process ................................ 1Copper Plating, Alk. Process ............................... 1Copper Sulfate .................... 1Core Oil ............................... 1Corundum .......................... 1Creosote .............................. 1Creosote, Cresylic Acid ...... 1Cyanide Solution ............... 1Cyanuric Chloride .............. 1Cyclohexane ...................... 1Cylinder Oils ...................... 1

De-Ionized Water .............. 1De-Ionized Water, LowConductivity ...................... 1Detergents ......................... 1Developer, Photographic .. 1Dextrin ............................... 1Diacetone Alcohol .............. 3Diammonium Phosphate .. 1Diamylamine ..................... 1Diatomaceaus Earth Slurry ........................ 1Diazo Acetate .................... 1Dibutyl Phthalate ............... 1Dichlorophenol .................. 1Dichloro Ethyl Ether........... 1Dicyandamide ..................... 1Dielectric Fluid .................. 1Diester Lubricants .............. 1Diethyl Ether, Dry .............. 1Diethyl Sulfate .................... 1Diethylamine ..................... 1Diethylene Glycol .............. 1Diglycolic Acid ................... 1Dimethyl Formamide ......... 1Dimethyl Sulfoxide ............ 1Dioxane, Dry ....................... 1Dioxidene ............................ 1Dipentene, Pinene ............. 1Diphenyl .............................. 1Distilled Water, Industrial 1Dowtherm .......................... 1Drying Oil ........................... 1Dust, Flue (Dry) ................. 1Dye Liquors ......................... 1

Emery Slurry ...................... 1Emulsified Oils ................... 1Enamel Frit Slip ................. 1Esters General .................... 1Ethyl Acetate ..................... 2Ethyl Alcohol ....................... 2Ethyl Amine ........................ 1Ethyl Bromide .................... 1

Ethyl Cellosolve ................. 2Ethyl Cellosolve Slurry ....... 2Ethyl Formate .................... 1Ethyl Silicate ...................... 1Ethylene Diamine .............. 1Ethylene Dibromide .......... 1Ethylene Dichloride .......... 1Ethylene Glycol................... 1Ethylenediamine Tetramine ............................ 1

Fatty Acids .......................... 1Fatty Acids, Amine ............ 1Fatty Alcohol ....................... 1Ferric Floc ........................... 1Ferric Chloride ................... 1Ferric Nitrate ..................... 1Ferric Sulfate ...................... 1Ferrocence, Oil Sol ............. 1Ferrous Chloride ............... 1Ferrous Oxalate .................. 1Ferrous Sulfate, 10%. ........ 1Ferrous Sulfate, Sat ........... 1Fertilizer Sol ........................ 1Flotation Concentrates ...... 1Fluoride Salts ..................... 1Fluorine, Gaseous orLiquid ................................... 1Fluorolube .......................... 1Fluosilic Acid ...................... 1Flux, Soldering ................... 1Fly Ash, Dry ......................... 1Foam Latex Mix .................. 1Foamite .............................. 1Formaldehyde, Cold ......... 2Formaldehyde, Hot ............ 3Formic Acid, Dil. Cold ........ 2Formic Acid, Dil. Hot ........ 3Formic Acid, Cold .............. 2Formic Acid, Hot ................ 3Freon ................................... 1Fuel Oil ............................... 1Fuming Nitric, Red, 20% .................................... 1Fuming Sulfuric, 20% ........ 1Fuming Oleum ................... 2Furfural ............................... 1

Gallic Acid .......................... 1Gallium Sulfate .................. 1Gasoline, Acid Wash .......... 1Gasoline, Alk. Wash .......... 1Gasoline, Aviation .............. 1Gasoline, Copper Chloride .............................. 1Gasoline, Ethyl .................. 1Gasoline, Motor.................. 1Gasoline, Sour .................... 1Gasoline, White ................. 1Gluconic Acid .................... 1Glue, Animal Gelatin ......... 1Glue, Plywood..................... 1Glutamic Acid ..................... 1Glycerine Lye, Brine........... 1Glycerol .............................. 1Glycine ................................. 1Glycine Hydrochloride ....... 1Glycol Amine ..................... 1Glycolic Acid ...................... 1Glyoxal . ............................... 1Gold Chloride ...................... 1Gold Cyanide ..................... 1Granodine ........................... 1Grape Pomace Graphite .... 1Grease, Lubricating ............ 1Green Soap ......................... 1Grinding Lubricant ............ 1Grit, Steel ........................... 1Gritty Water ....................... 1Groundwood Stock ........... 1GRS Latex ........................... 1Gum Paste .......................... 1Gum Turpentine ................. 1Gypsum .............................. 1

Halane Sol ........................... 1Halogen, Tin Plating ......... 1Halowax .............................. 1Harvel, Trans. 0il ............... 1Heptane .............................. 1Hexachlorobenzene ........... 2Hexadiene .......................... 1

Hexamethylene Tetramine ........................... 1Hexane ............................... 1Hydrazine ............................ 1Hydrazine Hydrate ............ 1Hydrobromic Acid ............. 3Hydrochloric Acid, 20% ... 1Hydrocyanic Acid .............. 1Hydroflouric Acid .............. 3Hydrogen Peroxide, Dil .... 1Hydrogen Peroxide, Con, 20% ........................... 1Hydroponic Sol .................. 1Hydroquinone ................... 1Hydroxyacetic Acid ........... 1Hypo ................................... 1Hypochlorous Acid ........... 1

Ink ........................................ 1Ink in Solvent, Printing ..... 2Iodine in Alcohol ............... 2Iodine, Potassium Iodide . 1Iodine Solutions ................ 1Ion Exchange, Service ....... 1Ion Exclusion, Glycol ........ 1Irish Moss Slurry ................ 1Iron Ore, Taconite ............. 1Iron Oxide .......................... 1Isobutyl Alcohol ................ 1Isobutyraldehyde .............. 1Isooctane ............................ 1Isopropyl Alcohol ............... 1Isocyanate Resin ................ 1Isopropyl Acetate .............. 2Isopropyl Ether .................. 2Itaconic Acid ...................... 1

jet Fuels .............................. 2jeweler’s Rouge ................. 1jig Table Slurry ................... 1

kaolin, China Clay ............. 1kelp Slurry ......................... 1kerosene ............................ 1kerosene, Chlorinated ....... 1ketone ................................. 3

Lacquer Thinner ................. 1Lactic Acid ........................... 1Lapping Compound .......... 1Latex, Natural .................... 1Latex, Synthetic ................ 1Latex, Synthetic Raw ......... 1Laundry Wash Water ........ 1Laundry Bleach .................. 3Laundry Blue ..................... 1Laundry Soda ..................... 1Lead Arsenate ..................... 1Lead Oxide .......................... 1Lead Sulfate ....................... 1Lignin Extract .................... 1Lime, Slaked ...................... 1Lime Sulfur Mix .................. 1Liquid Ion Exchange .......... 1Lithium Chloride ................ 1LOX (Liquid O2) ................... 1Ludox ................................... 1Lye, 20% ............................. 1

Machine Coating, Color ... 1Magnesite Slurry ................ 1Magnesite .......................... 1Magnesium Bisulfite ........ 1Magneslum Carbonate ..... 1Magnesium Chloride ........ 1Magnesium Hydroxide ..... 1Magnesium Sulfate ............ 1Maleic Acid ......................... 1Maleic Anhydride .............. 1Manganese Chloride .......... 1Manganese Sulfate ............ 1Melamine Resin ................ 1Menthol ............................... 3Mercaptans ......................... 1Mercuric Chloride ............. 1Mercuric Nitrate ................ 1Mercury .............................. 1Mercury, Dry ...................... 1Methane ............................. 1Methyl Alcohol .................. 1Methyl Acetate ................... 1Methyl Bromide ................. 1

Methyl Carbitol ................. 1Methyl Cellosolve ............. 1Methyl Chloride ................ 3Methyl Ethyl ketone .......... 3Methyl Isobutyl ketone ..... 3Methyl Lactate.................... 1Methyl Orange .................. 1Methylamine ..................... 1Methylene Chloride .......... 3Mineral Spirits ................... 1Mixed Acid, Nitric/Sulfuric, 20%. .................................... 1Monochloracetic Acid, 10% ...................................... 1Morpholine ......................... 1Mud ...................................... 1

Nalco Sol. ............................ 1Naphtha ............................. 1Naphthalene ...................... 1Naval Stores Solvent .......... 1Nematocide ....................... 1Neoprene Emulsion .......... 1Neoprene, Latex ................ 1Nickel Acetate ................... 1Nickel Ammonium Sulfate 1Nickel Chloride .................. 1Nickel Cyanide .................... 1Nickel Fluoborate .............. 1Nickel Ore Fines ................ 1Nickel Plating Bright ........ 1Nickel Sulfate .................... 1Nicotinic Acid ..................... 1Nitrate Sol. ......................... 1Nitration Acid(s) ................ 1Nitric Acid, 10% ................ 2Nitric Acid, 20% ................ 3Nitric Acid, Anhydrous ..... 2Nitric Acid, Fuming . .......... 3Nitro Aryl Sulfonic Acid ... 2Nitrobenezene, Dry .......... 2Nitrocellulose .................... 1Nitrofurane ........................ 1Nitroguanidine .................. 1Nitroparaffins, Dry ............ 1Nitrosyl Chloride ............... 1Norite Carbon .................... 1Nuchar ................................ 1

Oakite Compound .............. 1Oil, Creosote ....................... 1Oil, Emulsified ................... 1Oil, Fuel .............................. 1Oil, Lubricating .................. 1Oil, Soluble ........................ 1Oleic Acid, Hot ................... 1Oleic Acid, Cold ................. 1Ore Fines, Flotation .......... 1Ore Pulp .............................. 1Organic Dyes ..................... 1Oxalic Acid, Cold ............... 1Ozone, Wet ........................ 1

Paint, Linseed Base. ........... 1Paint, Water Base .............. 1Paint Remover, Sol. Type ... 1Paint, vehicle ..................... 1Palmitic Acid ...................... 1Paper Board, Mill Waste ... 1Paper Coating Slurry .......... 1Paper Pulp ........................... 1Paper Pulp with Amun. .... 1Paper Pulp with Dye .......... 1Paper Pulp, Bleached ......... 3Paper Pulp, Bleached, Washed ................................ 3Paper Pulp, Chlorinated .... 2Paper Groundwood ........... 1Paper Rag ........................... 1Paper Stocks, Fine .............. 1Paradichlorobenezene ...... 2Paraffin, Molten ................. 1Paraffin Oil ......................... 1Paraformaldehyde ............ 1Pectin Solution Acid ......... 1Pentachlorethane .............. 2PentaerythritoI Sol. ........... 1Perchlorethylene, Dry ........ 2Perchloric Acid, 10%.......... 3Perchloromethyl Mercaptan .......................... 1Permanganic Acid .............. 2

legend:1 Compatible

2 Intermittent Exposure

3 Not Compatible

FlUid compaTibiliTy charTfor metal parts repaired witH loctite® fixmastermetal reBuilding products


Persulfuric Acid, 10% ............ 3Petroleum Ether, 10% ............ 3Petroleum jelly ........................ 1Phenol FormaldehydeResins ....................................... 1Phenol Sulfonic Acid .............. 1Phenolic Glue ........................... 1Phloroglucinol ......................... 1Phosphate Ester ...................... 1Phosphatic Sand ...................... 1Phosphoric Acid, 85% Hot .... 3Phosphoric Acid, 85% Cold .. 3Phosphoric Acid, 50% Hot ... 3 Phosphoric Acid, 50% Cold .. 3Phosphoric Acid, 10% Cold .... 1Phosphoric Acid, 10% Hot ..... 3Phosphorous, Molten ............. 1Phosphotungstic Acid, 20% ... 1Photographic Sol. .................... 1Phthalic Acid ............................ 1Phytate ..................................... 1Phytate Salts ............................ 1Pickling Acid, Sulfuric ........... 3Picric Acid Solutions ............... 1Pine Oil Finish ......................... 1plating Sol. as follows: Brass Cyanide ....................... 1 Bronze, Cyanide ................... 1 Chromium and Cadmium ... 1 Cyanide ................................. 1 Cobalt Acid, 20% ................. 1 Copper Acid, 20% ................. 1 Copper Alk., 20% .................. 1 Gold Cyanide ........................ 1 Iron Acid, 20% ..................... 1 Lead, Fluoro .......................... 1 Nickel, Bright ....................... 1 Platinum ................................ 1 Silver Cyanide ...................... 1 Tin Acid, 20% ....................... 1 Tin Alk. Barrel, 20% ............ 1 zinc Acid, 20% ..................... 1 zinc Alk. Cyanide .................. 1Polyacrylonitrile Slurry ........... 1Polypentek ............................... 1Polysulfide Liquor ................... 1Polyvinyl Acetate Slurry ......... 1Polyvinyl Chloride ................... 1Porcelain Frit ............................ 1Potash ....................................... 1Potassium Acetate .................. 1Potassium Alum. Sulfate ......... 1Potassium Bromide ................. 1Potassium Carbonate ............. 1Potassium Chlorate .................. 1Potassium Chloride Sol. ......... 1Potassium Dichromate ........... 1Potassium Ferricyanide .......... 1Potassium Hydroxide, 40% ...................... 1

Potassium Iodide .............. 1Potassium Nitrate .............. 1Potassium Perchlorate ..... 1Potassium Permanganate . 1Potassium Persulfate ........ 1Potassium Phosphate ....... 1Potassium Silicate . ............ 1Potassium Sulfate ............. 1Potassium Xanthate .......... 1Press Board Waste ............ 1Propionic Acid ................... 1Propyl Alcohol .................... 1Propyl Bromide ................. 1Propylene Glycol ................ 1Pumice ................................ 1Pyranol ............................... 1Pyridine .............................. 1Pyrogallic Acid .................... 1Pyrogen, Free Water ......... 1Pyrole .................................. 1Pyromellitic Acid ............... 1

quebracho Tannin ............. 1

Rag Stock, Bleached .......... 2Rare Earth Salts ................. 1Rayon Acid Water ............. 1Rayon Spin Bath ................ 1Rayon Spin Bath, Spent..... 1Resorcinol .......................... 1River Water ......................... 1Road Oil .............................. 1Roccal ................................. 1Rosin, Wood ........................ 1Rosin in Alcohol ................ 1Rosin Size ........................... 1Rubber Latex ..................... 1

Safrol ................................... 1Salt, Alkaline ...................... 1Salt, Electrolytic ................ 1Salt, Refrig. ........................ 1Sand, Air Blown Slurry ..... 1Sand, Air Phosphatic ........ 1Sea Coal .............................. 1Sea Water ........................... 1Selenium Chloride ............ 1Sequestrene ....................... 1Sewage ............................... 1Shellac ................................. 1Shower Water .................... 1Silica Gel ............................ 1Silica, Ground .................... 1Silicone Tetrachloride ....... 1Silicone Fluids .................... 1Silver Cyanide .................... 1Silver Iodide, Aqu. ............. 1Silver Nitrate ..................... 1Size Emulsion .................... 1Skelly Solve E, L ................. 1Slate to 400 Mesh ............ 1Soap, Lye ............................ 1Soap Solutions, Stearates 1Soap Stone, Air Blown ...... 1Soda Pulp ........................... 1Sodium Acetate ................. 1Sodium Acid Fluoride, 20% .................................... 1Sodium Benzene Sulfonate ............................ 1Sodium Bichromate .......... 1Sodium Bisulfite ................ 1Sodium Bromide ............... 1

Sodium Carbonate ............ 1Sodium Chlorate ............... 1Sodium Chlorite ................ 1Sodium Cyanide ................ 1Sodium Ferricyanide ........ 1Sodium Formate ................ 1Sodium Glutamate ............ 1Sodium Hydrogen Sulfate ................................ 1Sodium Hydrosulfite ......... 1Sodium Hydrosulfide ........ 1Sodium Hydrochloride ..... 2Sodium Hydroxide, 20% .. 1Sodium Hydro., 20% Cold ........................... 3Sodium Hydro., 20% Hot ............................. 2Sodium Hydro., 50% Cold ........................... 3Sodium Hydro., 50% Hot ............................. 3Sodium Hydro., 70% Cold ............................ 3Sodium Hydro., 70% Hot ............................. 3Sodium Hypochlorite ........ 3Sodium Lignosulfonate .... 1Sodium Metasilicate ......... 1Sodium, Molten ................. 1Sodium Nitrate .................. 1Sodium Nitrite, Nitrate ..... 1Sodium Perborate ............. 1Sodium Peroxide ............... 1Sodium Persulfate ............. 1Sodium Phosphate, Mono .................................. 1Sodium Phosphate, Tri ..... 1Sodium Potassium Chloride ............................... 1Sodium Salicylate .............. 1Sodium Sesquicarbonate .. 1Sodium Silicate .................. 1Sodium Silcofluoride ........ 1Sodium Stannate ................ 1Sodium Sulfate .................. 1Sodium Sulfide .................. 1Sodium Sulfite .................... 1Sodium Sulfhydrate .......... 1Sodium Thiocyanate ......... 1Sodium Thiosulfate ............ 1Sodium Tungstate .............. 1Sodium Xanthate .............. 1Solox, Denat. Ethanol ....... 2Soluble Oil ......................... 1Solvent Naphthas .............. 1Sorbic Acid .......................... 1Sour Gasoline .................... 1Soybean Sludge Acid ......... 1Spensol Solution ............... 1Stannic Chloride ................ 1Starch .................................. 1Starch Base ........................ 1Stearic Acid ......................... 1Steep Water ....................... 1Sterilization Steam ........... 1Stillage Distillers ............... 1Stoddard Solvent ............... 1Styrene ............................... 1Styrene Butadiene, Latex . 1Sulfamic Acid, 20% .......... 1Sulfan, Sulfuric Anhydride 1Sulfathiazole ...................... 1Sulfite Liquor ..................... 1

Sulfite Stock ........................ 1Sulfonated Oils .................. 1Sulfones ............................. 1Sulfonic Acids .................... 2Sulfonyl Chloride .............. 1Sulfur Slurry ....................... 1Sulfur Solution ................... 1in Carbon Disulfide ........... 1Sulphuric Acid, 0-7% ........ 2Sulphuric Acid, 7-40% ...... 3Sulphuric Acid, 40-75% ... 3Sulphuric Acid, 75-95% .... 3Sulphuric Acid, 95-100% . 3Sulphurous Acid ................ 2Sulfuryl Chloride ............... 1Surfactants ......................... 1Synthetic Latex .................. 1

Taconite, Fines .................. 1Talc Slurry .......................... 1Tankage Slurry ................... 1Tannic Acid, Cold .............. 1Tamin ................................... 1Tar and Tar Oil .................... 1Tartaric Acid ........................ 1Television Chemicals ......... 1Tergitol ............................... 1Terpineol ............................ 1Tetraethyl Lead .................. 1Tetrahydrofuran ................ 1Tetranitromethane ............ 1Textile Dyeing .................... 1Textile Finishing Oil .......... 1Textile Printing Oil ............. 1Thiocyanic Acid .................. 1Thioglycollic Acid .............. 1Thionyl Chloride ................ 1Thiophosphoryl Chloride... 1Thiourea .............................. 1Thorium Nitrate .................. 1Thymol ................................ 1Tin Tetrachlorida ................ 1Tinning Sol., DuPont ......... 1Titania Paper Coating ....... 1Titanium Oxide Slurry ...... 1Titanium Oxy Sulfate ......... 1Titanium Sulfate ................ 1Titanium Tetrachloride ..... 1Toluol ................................... 3Toluene ............................... 3p-Toluene Sulfonic Acid ... 2Transil Oil ........................... 1Trichloracetic Acid, 10% ... 1Trichlorethane, 1,1,1 .......... 2Trichlorethylene ................ 2Trichlorethylene, Dry ........ 2Tricresyl Phosphate ........... 1Triethanolamine ................ 1Triethylene Glycol ............. 1Trioxane .............................. 1Tungstic Acid ..................... 1Turpentine .......................... 1

uCON Lube ........................ 1udylite Bath, Nickel .......... 1undecylenic Acid .............. 1unichrome Sol., Alk .......... 1uranium Salts .................... 1uranyl Nitrate .................... 1uranyl Sulfate .................... 1urea Ammonia Liquor, 20% .................................... 1

gasesAcetylene ........................... 1Acid and Alkali vapors ...... 2Air ....................................... 1Amine ................................. 1Ammonia ............................ 1

Butane ................................ 1Butadiene, Gas/Liquid ..... 1Butylene, Gas/Liquid ........ 1By-Product Gas, Dry ......... 1

Carbon Dioxide ................. 1Carbon Disulfide ............... 1Carbon Monoxide ............. 1Chloride, Dry ..................... 1Chlorine, Dry ..................... 1Chlorine, Wet ..................... 2Coke Oven Gas, Cold ........ 1Coke Oven Gas, Hot .......... 3Cyanogen Chloride ........... 1Cyanogen Gas .................... 1

Ethane ................................ 1Ether, see Diethyl Ether ... 1Ethylene ............................. 1Ethylene Oxide .................. 1

Freon (11-12-21-22) ............. 3Furnace Gas, Cold ............. 1Furnace Gas, Hot .............. 3

Gas, Drip Oil ...................... 1Gas, Flue ............................ 3Gas, Natural ....................... 1

Helium ................................ 1Hydrogen Gas, Cold .......... 1Hydrogen Chloride ........... 1Hydrogen Cyanide ............ 1Hydrogen Sulfide, Wet and Dry ....................................... 1

Isobutane. ........................... 1

Methane ............................. 1Methyl Chloride.................. 3

Natural Gas, Dry ................ 1Nitrogen Gas ...................... 1Nitrous Oxide .................... 1

Oil, Solvent vapor .............. 1Oxygen ............................... 3Ozone ................................. 3

Propane .............................. 1Propylene ........................... 1

Steam, High Pressure (> 70 psi) ............................ 1Steam, Low Pressure (< 70 psi).............................. 1Sulfur Dioxide .................... 1Sulfur Dioxide, Dry ........... 1Sulfur Trioxide Gas ........... 1Sulfuric Acid vapor, 20% . 1

vacuum Oil ......................... 1vanadium Pentoxide ......... 1Slurry .................................. 1varnish ............................... 1varsol, Naphtha Solv. ........ 1versene .............................. 1vinyl Acetate, Dry orChloride Monomer ............ 1vinyI Chloride, Latex Emul 1vinyl Resin Slurry .............. 1viscose ............................... 1vortex, Hydroclone ............ 1

Water, Acid Below pH 7 ..... 2Water, pH 7 to 8 ................ 1Water, Alkaline Over pH 8, 20%. .......................... 1Water, Mine Water ............ 1Water, Potable .................... 1Water, River ....................... 1Water, Sandy ...................... 1Water, “White” Low pH, 20% ............................. 1Water, “White” High pH, 20% ............................. 1Wax ..................................... 1Wax, Chlorinated .............. 1Wax Emulsions .................. 1Weed killer, Dibromide .... 1Weisberg Sulfate Plating .. 1Wood, Ground Pulp ........... 1Wort Lines ........................... 1

X-Ray Developing Bath ..... 1Xylene ................................. 3

zelan ................................... 1zeolite Water ..................... 1zinc Acetate ....................... 1zinc Bromide ..................... 1zinc Chloride ..................... 1zinc Cyanide, Alk. .............. 1zinc Fines Slurry ................ 1zinc Flux Paste ................... 1zinc Galvanizing ................ 1zinc Hydrosulfite................ 1zinc Oxide in Water ........... 1zinc Oxide in Oil ............... 1zinc Sulfate ........................ 1zincolate ............................ 1zirconyl Nitrate ................. 1zirconyl Sulfate .................. 1

NOTE: a). The above information does not constitute a recommendation of product use. It is intended only as a guide for consideration by the purchaser with the expectation of favorable confirming test results. It is impossible to test product reaction with the multitude of chemicals in existence, therefore, compatibility has been estimated based on a wide variety of customer experience. b). With the stringent action of such chemicals as Freon®, strong cold acids and caustics, thorough evaluation is suggested. c). Contact Henkel Corporation for use with chemicals not covered by this information. Listings in italics are trademarks or registered trademarks for chemicals of corporations other than Henkel.

The data contained herein are furnished for information only and are believed to be reliable. We cannot assumeresponsibility for the results obtained by others over whose methods we have no control. It is the user’s respon-sibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporation’s

products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Cor-poration patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more united States or foreign patents or patent applications.

FlUid compaTibiliTy charTfor metal parts repaired witH loctite® fixmastermetal reBuilding products

legend:1 Compatible

2 Intermittent Exposure

3 Not Compatible


Quantity IDH No. LOCTITE® Product Package Size

threadlocking

228581 LOCTITE® 222 50 ml bottle




37773 LOCTITE® 248 19 g stick


thread sealing

232095 LOCTITE® 545 Thread Sealant 50 ml bottle

231701 LOCTITE® 567 PST Thread Sealant with PTFEE 50 ml bottle



483282 LOCTITE® 55 Pipe Sealing Cord 1,968 inches (50 m)

463973 LOCTITE® 561 PST Pipe Sealant with PTFE - Stick 19 g stick

gasketing

731749 LOCTITE® 534 Hi-Tack Gasket Dressing 19 g stick

235255 LOCTITE® 510 Gasket Eliminator Flange Sealant 50 ml tube

231697 LOCTITE® 518 Gasket Eliminator Flange Sealant 50 ml tube

231482 LOCTITE® 587 Blue RTv Silicone 85 g tube

778136 LOCTITE® 596 Superflex Industrial Grade Silicone 85 g tube

743912 LOCTITE® Instant Gasket 90 ml

retaining







231699 LOCTITE® 660 quick Metal 50 ml tube

instant Bonding

840071 LOCTITE® 435 Prism Instant Adhesive 1 lb. bottle

135423 LOCTITE® 380 Black Max Instant Adhesive 1 oz. bottle

135465 LOCTITE® 404 quick Set Instant Adhesive 1/3 oz. bottle

852269 LOCTITE® 480 Prism instant Adhesive 20 g tube

231472 LOCTITE® 401 Prism Instant Adhesive 20 g

135462 LOCTITE® 454 Prism Instant Adhesive 20 g

structural Bonding

1690727 LOCTITE® 330 Depend Adhesive 25 ml syringe

235281 LOCTITE® Fixmaster Poxy Pak 1 oz. syringe

237129 LOCTITE® E-120HP Hysol Epoxy Adhesive 200 ml syringe

1057673 LOCTITE® 331 Structural Adhesive 25 ml syringe

1210760 LOCTITE® Power Grad Industrial ConstructionAdhesive 300 ml cart.

209718 LOCTITE® Fixmaster Fast Cure Epoxy - Mixer Cups 10 - 1 oz. cups

quantity IDH No. LOCTITE® Product Package Size

anti-seize lubricants

233507 LOCTITE® zinc Anti-Seize 1 lb. can

209758 LOCTITE® Heavy Duty Anti - Seize 1.2 lb. brushtop

275026 LOCTITE® Marine Grade Anti - Seize 16 oz. brushtop

525736 LOCTITE® C5 - A Copper Based Anti - Seize Lubricant 20 g stick

525737 LOCTITE® Silver Grade Anti - Seize 20 g stick

209749 LOCTITE® Food Grade Anti - Seize 8 oz. brushtop

235028 LOCTITE® Nickel Anti-Seize 8 oz. brushtop

cleaning

209804 LOCTITE® Natural Blue Biodegradable Cleaner & Degreaser 1 gal. bottle

230176 LOCTITE® ODC - Free Cleaner & Degreaser 1 gal. can

209739 LOCTITE® Electrical Contact & Parts Cleaner 11 oz. aerosol

439223 LOCTITE® Non - Flammable Electrical Contact Cleaner 14 oz. aerosol

135544 LOCTITE® 790 Chisel Gasket Remover 18 oz. aerosol

234941 LOCTITE® Pro Strength Parts Cleaner 19 oz. aerosol

419271 LOCTITE® Orange Lotion Hand Cleaner Smooth Formula 400 ml bottle

primers

475763 LOCTITE® 7649 Primer N 4.5 oz.

555110 LOCTITE® 7471 Primer T 4.5 oz.

Quantity IDH No. LOCTITE® Product Package Size

Need It Now!name:

area:

Please provide quantity needed below:

For more information, please contact us at : www.henkel-ap.com/mro

® All trademarks, except where otherwise noted, are the properties of or used under license by Henkel Corporation. © Copyright 2013. Henkel Corporation. All rights reserved. SEA AG-002 (11/2013)

name:

Problem Equipment:

Describe problem, including failing components:

How often does this happen?

Necessary products issued? Need LOCTITE® rep help?

Topics (check appropriate boxes.) comments

Wear Prevention

Mechanical Basics & Failure Root Causes

check appropriate boxes Strongly agree agree disagree

I learned useful information and proactive techniques for my job:

The instructor was well-informed and his/her style made it easy to learn:

The examples helped me to understand where I can help increase reliability:

The demos and visual aids were used effectively and helped me learn:

The reference handouts are on target and will be helpful reminders:

Length of class:

Pace of class:

comments:

Rebuild/Resurface Shafts

Machine Base Grouting

Belt jointing & Repair

Floor Repair & Resurface

Anti-Slip Safety Flooring

Corrosion Protection (tanks, decking, etc.)

Describe your intended actions, including products to be used:

Describe negative impact:

Times per month: Times per year:

Department or Area:

area:

reliability improvement Suggestion

additional Training needed

Training critique

Problem Equipment: Department or Area:

Describe problem, including failing components:

How often does this happen?

Necessary products issued? Need LOCTITE® rep help?

Describe your intended actions, including products to be used:

Describe negative impact:

Times per month: Times per year:

yes yesNo No

yes No yes No

Too Long

Too Fast

just Right Too Short

Too Slowjust Right

For more information, please contact us at : www.henkel-ap.com/mro

® All trademarks, except where otherwise noted, are the properties of or used under license by Henkel Corporation. © Copyright 2013. Henkel Corporation. All rights reserved. SEA AG-002 (11/2013)

henkel asia–pacific &china headquartersNo. 928 zhangheng Roadzhangjiang High–Tech ParkPudong New DistrictShanghai 201203, P.R. ChinaTel: +86–21–2891 8000Fax: +86–21–2891 8971

henkel australia pty ltd.135–141 Canterbury Roadkilsyth, victoria 3137Melbourne, AustraliaTel: +61–3–9724 6444Fax: +61–3–8761 6988

henkel hong kong ltd.units 807–8108/F Island Place Tower510 king’s Road, North PointHong kongTel: +852–2233 0000Fax: +852–2802 9995

henkel adhesivesTechnologies india pvt. ltd.11/F kesar Solitaire Plot No. 5, Sector 19 Palm Beach Road Sanpada, Navi Mumbai Maharashtra 400 705, IndiaTel: +91–22–3929 6600 Fax: +91–22–3929 6602

pT. henkel indonesien21/F, Talavera Office Parkjl. Letjen TB. Simatupangkav. 22–26 jakarta 12430IndonesiaTel: +62–21–2758 6900Fax: +62–21–7592 4625

henkel Japan ltd. 27–7 Shin Isogo–choIsogo–ku, yokohama–shikanagawa 235–0017, japanTel: +81–45–758 1800Fax: +81–45–758 1851

henkel korea ltd. 8/F, Henkel Tower418 Mapo–dong, Mapo–guSeoul 121–734, South koreaTel: +82–2–3279 1700Fax: +82–2–3273 4663

henkel (malaysia) Sdn. bhd. 46/F, Menara Telekomjalan Pantai Bahrukuala Lumpur 59200MalaysiaTel: +60–3–2246 1000 Fax: +60–3–2246 1188

henkel new Zealand ltd.2 Allens Road, East TamakiPO Box 58 493Greenmount 1730Auckland, New zealandTel: +64–9–272 6710Fax: +64–9–272 6735

henkel philippines inc.LSL Building 2, Diode St., LISPP, Brgy. Diezmo, CabuyaoLaguna 4025, PhilippinesTel: +63–49–543 1088Fax: +63–2–325 0031

henkel Singapore pte ltd. #03–01/02Haw Par Technocentre401 Commonwealth DriveSingapore 149598Tel: +65–6266 0100Fax: +65–6266 1161

henkel Taiwan ltd. 10/F, 866 zhongzheng Roadzhonghe DistrictNew Taipei City 235, TaiwanTel: +886–2–2227 1988Fax: +886–2–2226 8699

henkel (Thailand) ltd. 35/F, Centralworld Tower999/9 Rama I Roadkhwaeng Pathumwankhet PathumwanBangkok 10330, ThailandTel: +66–2–209 8000Fax: +66–2–209 8008

henkel adhesive Technologies Vietnam co., ltd.No. 7, Road 9ABien Hoa II Industrial ParkBien Hoa, Dong Nai ProvincevietnamTel: +84–61–3835 461Fax: +84–61–3835 463

® Except as otherwise noted,

all marks used above in this

brochure/leaflet, report/data

sheet etc. are trademarks and/

or registered trademarks of

Henkel and/or its affiliates in

the uS and elsewhere.

© Copyright 2013. Henkel Asia-

Pacific and China Headquarters.

All rights reserved. APH–AG–101

(11/2013)

Henkel products are designed to meet the specifications and testing standards of a variety of agencies. Because such standards change or may be modified, no warranty is given regarding such compliance. The information provided may be used as a quick reference tool to aid in design or application. For up-to-the-minute information on agency approvals, or to inquire about additional agency approvals, please contact Henkel Product Management team or local Technical Support team.

Contact us at: www.henkel-ap.com/MRO.

www.henkel-ap.com/mro

Maintenance, Repair and OverhaulSolutions Guide

www.henkel-ap.com/MRO

Henkel_MaintenanceSolutions_newcover copy.pdf 1 11/18/13 4:27 PM

Maintenance, Repair and Overhaul Solutions Guide · At Henkel Corporation, we invent more than just...

Documents

Transcript of Maintenance, Repair and Overhaul Solutions Guide · At Henkel Corporation, we invent more than just...