Model: Metso Lokotrack LT1213S Serial No.

76125 Date: 12/12/2013

Engine CAT Engine C13 Serial No.

LGK12588 Hours: 1202

Machine History

Purchased New Metso Lokotrack LT1213S Plant – Serial # 76125 – 4/2011

Engine Warranty – 60 Months or 8,000 hrs. – Valid till 4/26/2016

Installation Date – 4/2011

Months Owned – 33 thru 12/2013

Months in Operation – 17 thru 12/2013 or 52%

LT1213S Plant Maintenance

Work Description – Conveyor, Frame

Engine Oil Changed/Serviced – 11/2013

Hydraulic Oil Changed, Replaced Impactor Liners – 10/2013

Replaced Water Pump, Replaced Speed Sensor, Replaced Drive Pulley – 3/2012

Replaced Pulleys/Idlers on Conveyors – 1/2012

*Note: this unit will need blow bars.

Serial No. 76125

Engine Serial # LGK12588 Engine Arrangement # 241-3804

Year Month

2013 11-12

2013 10-11

2013 8-9

2013 7

2013 6

2013 5

2013 4-5

2013 3

2013 1

2012 11

2012 8-11

2012 7

2012 7

2012 5

2012 3

2012 1

2012 1-5

2011 12

2011 10

2011 8

2011 6

2011 4

2011 4Purchased Machine - Engine Warranty - 60 Months or 8000 hrs - Valid till 4/26/2016

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Date: 12/12/2013Model: Metso Lokotrack LT1213S

Engine Model - Cat C13 Hours - 1202

Work Order Directive

Prepared machine for next job - Machine Idle

Machine Idle

Prepared machine for next job - Machine Idle

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Prepared machine for next job - Machine Idle

Prepared machine for next job - Machine Idle, Engine Oil Changed/Serviced, Hydraulic Oil Changed, Replaced Impator Liners

Prepared machine for next job - Machine Idle

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Replaced Water Pump, Replaced Drive Pulley, Replaced Speed Sensors

Machine Idle

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Machine Start Up

Machine Idle

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Minor On Site Repairs - oil changes, plant Servicing, clean up, etc

Machine Idle

Replaced Pulleys/Idlers on Conveyors

{}metsoCommissioning and Warranty Registration Date #-.;l c;,- II

FOR NORDBERG LT1110/ LT1110S/ LT1213/ LT1213S SIN 7~i~b

(N11457739, B-rev.)

Metse Minerals warranty starts on the day of this Commissioning and Warranty Registration has taken place.

Customer Phone YES NO-;:';:/;::=J..Lor-r C::-;;MPA,vY (?:JJU-~78-.JOoO Warranty certificate received: 0

~Customer representative Position Instruction manual received: 10"'u;;;;.; F,;ZEAJi3/H~~R :5Eev;:rc..£ ""'7i=<...1-/ Parts manual received: [B"'

Address Delivery date as promised: 0 0Engine registration done (*) 0 0

/00 UIE.J..J. o-r-r D;z:.x:- 11£ Diesel engine sin J.-61< I 'J- 5"88City, State, Zip Have MM met your expectation in terms of product quality

hhR'FOIZc>s:;,glJeL P. A . 1"7;). c;, 7 Perception (first impression) l5 0Metso Minerals Sales Unit I Distributor Operating test G" DJV1'E)' LOT"'- La -'t» ••• J V Was the sales process you met through acceptable

Contact Phone Pre sales ~ Dzz;;;,£:5 iE 1/Y (301) - &;7<.",'- ~ClOO Delivery E::r DApplication: RockD Gravel ~ Recycling D Are you generally satisfied with all MM contactsAmb. Temperature °C I 75' OF Responsiveness EJ USetting: mm ..:t. inch Competence 13'" [J

Has the operator received any accredited competence training?

A. LT START-UP OK NOTE

Inspections before starting the engine1. Check oil and water level in diesel engine I•.••. [J2. Check oil level in track gearboxes ~ [J3. Check oil level in feeder vibration unit ~ D4. Check oil level in hydraulic tank ~ D5. Check v-belt tension [V 0After the engine start6. Check function of the process & options .•.. 07. Check manual valve functions 2:1-" 08. Check hydraulic oil max pressure, LS pressure and °T ~ D9. Check the safety installations G?' D10. Check belt tracking B' DAfter material feed11. Tightening of impact bars 15 D12. Screen cloth tightening in feeder and screen unit GY D13. Conveyor belt tracking ~ 014. Crusher V-belt tension ..iI' D15. Check return spring tension:!i1!i mm v"' ~16. D 0

B. FAMILIARISATION TRAINING OFOK NOTETHE OPERATOR

1. Safety familiarisation 16 02. Operating with unit g--- D3. Daily maintenance of the unit GY" [J4. Name I Company of attending in training:

a f{-:z;:.-?IJAED .~MYE!.ICS 1!0E:J.U ..,.., d;."" '/'AAJYb:-J'iE.re:~y Bp,s;;;;, (~i..E. I it-1~LUJ'" ·r~Vlp. INY'

c. g£,v~",; ~F-~D 1 fkAl.vsy"" UPP..LY'd.e.

C. OTHER1. Foldable main conveyor operation ~ [3'2. Screen units operation G' D3. Side conveyor operation Q' D4. Magnet operation [;1/ D5. Hydraulic PTO operation 0' 06. 0 D7. D D8. D D

(U.S: all associated paperwork must be attached (I.E Delivery Acceptance Form, Crushing Member S/U, etc.)}Notes:

(Please write additional notes on the back side of this paper)

cU7er~Date ?:zr/!!7::zzg'L/~~~-tlMetso Minerals Service Manager Date»: ;:, '1-1C;-I/

/ -

*( )http.//IMNW.cat.com (engines> engine warranty registration) Comrniaaioninq and Warranty Registration (CWR)26.11.2008

1}metsoCommissioning and Warranty Registration page two

Safety familiarisation of Metso supplied equipment

• Pre start up visual inspection (all guards fitted and safe to use)

• Location and use of Metso supplied emergency safety devices

• Familiarisation oftracking controls

• Familiarisation of Metso supplied operational controls

• Familiarisation of general lock-out points

(NOTE: PLEASEREFERTO MANUAL FOR STORED ENERGY RISKS)

G> No N/A

C§) No N/A

c:Jii:;? No N/A

cYi) No N/A

~ No N/A

PLEASE NOTE: REFER TO THE INSTRUCTION MANUAL FOR A COMPLETE GUIDE TO SAFETY BEST PRACTICES AND

PROCEEDURES FOR THIS EQUIPMENT ~

s;gnatu,e~ p'intR~~Y[ isOperator 1

Operator 2~~.~

Signature :~ ~ Print .7;i;:(7 ..&~/.--Signa,",e~;tW p'in;{!G~ L Fr-e/Operator 3

Operator 4 Signature . Print .

Operator 5 Signature . Print .

Caterpillar Engines & Engine Systems Provide Power to the World Page 1 of2

~~ r United States / Canada [change] Find A Dealer Contactr

Search 1 1.HOME I PRODUCTS I APPLICATIONS I PARTS & SERVICE I RENTAL I NEWS & EVENTS

Products) Engines

Current Machine LineNon-Current Machine LineWork Tool AttachmentsAlliedEngines» Marine»Oil & Gas» On-Highway Engines andTransmissions

» Cat® Emissions SolutionsOn-Highway Trucks.- --- -- ----.

Industrial/OEM PowerSystemsUsed Equipment

.--- - - .. - ---Power GenerationTurbines- -,.~----.. -ElectronicsOEM SolutionsTechnologyGifts & Apparel

ABOUT THE COMPANY

ENGINESOn the road or at sea, moving ground or deep beneath it, Caterpillar engines power the world. Withmore than 500 types, we're among the world's largest engine makers, and the only one withACERpM Technology.

ENGINE WARRANTY REGISTRATION

Data Privacy Statement

Caterpillar wishes to thank you for your purchase. We are committed to providing our customers with thefinest products and product support available in any market today. To do this, we need to update ourdatabase with some specific information. Caterpillar will set the warranty date if you will complete theinformation below and return this form to us.

You may be entitled to a delivery inspection. To receive the special benefit, ask your servicing Caterpillardealer if your engine qualifies for a delivery inspection as set forth in the Caterpillar Service WarrantyGuide.

If you are registering an engine used in an Oil & Gas application, please use the new Oil & Gas EngineRegistration form at http://catoilandgas.cat.com/engineregistration

NOTE: Authorized Caterpillar Service providers may require further verification of date of delivery.

* denotes required field

Engine Information:

Engine Type: * IIndustrial/MachinesEngine Sales Model (Example: 3406E): * /C13

Engine Serial Number (8 characters): *

Date of Delivery (MMIDDIYYYY): *

ILGK12588

104-26-2011

2nd Engine Serial Number(8 characters):

3rd Engine Serial Number(8 characters):

I(Twin Engine Installation only)I .(Multiple Engine Installation only)

Profile Information:

Company Name:

Last Name: *

IMeliott Company

IChamberlain

First Name: * IDaie

Address: * r100 Mellott Drive

City: * rWarfordsbu rg

http://www.cat.com/cdalcomponents/fullArtic1e?m=3 7532&x=7 &id= 130448 4/28/2011

Caterpillar Engines & Engine Systems Provide Power to the World Page 2 of2

State: * IPennsylvania :0::1ZIP Code: * 117267

Country: * IUnited States =:1Telephone Contact Number: * 1301-678-2136

Numbers ONLY

Email: * Idchamberlain@meliotts.com

Engine is installed in:

Manufacturer's Name: * IMetso Minerals :3Manufacturer's Model: * fLT1213S ::±lManufacturer's Serial Number: *1-7-6-1-2-5------------3

Do you have a warranty statement for your(i Yes r NoCaterpillar Engine?

I would like to receive information on how I mightpurchase Extended Service Coverage for my (i Yes r Noengine.Are you the first owner of this product? Ie Yes r NoDo you have an Operation and Maintenance (i Yes r Nomanual for your Caterpillar Engine?Do you know who your local authorized Caterpillar r Yes Ie NoService Facility is?

For Truck or RV Customers Only:Is this engine installed in a truck equipped for pulling trailers and is used solely forpersonal reasons such as pulling recreational trailers (boats, horses, race-cars, etc.)?Is this engine installed in anyone of the following types of vehicles: School Bus, RV,FireTruck, Emergency Service Vehicle or Ambulance?

Submit I Clear Form

rYes

rYes

Ie No

(i No

~ Mobile Facebook I: Twitter

Rights Reserved

~ YouTube

Legal Notices

~ Newsfeeds © 2011 Caterpillar All

SiteMap Print Version Contact

http://www.cat.com/cda/components/fullArticle?m=37532&x=7&id=130448 4/2812011