M351 · 1 Mixer M351 2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP eRex website: ...
23
1 Mixer BM351 2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP BeRex ●website: www.berex.com ●email: [email protected] Specificaons and informaon are subject to change and products may be disconnued without noce. BeRex is a trademark of BeRex. All other trademarks are the property of their respecve owners. © 2020 BeRex Rev. D • +31.8 dBm Input IP3 @3.5G • 9.0 dB Conversion Loss @3.5G • Integrated LO Driver • -2 to +2 dBm LO drive level • Available 3.3 V to 5 V single voltage • MSL 3, TDFN-8L 3x3, Green / RoHS2 compliant • ESD HBM Class 1A Device Features The BM351 is a high linearity and dynamic covering range from 2.5 GHz to 6.0 GHz on 3.3 V to 5 V with a passive GaAs FET converter and two stage LO driver. This is packaged in a plasc surface mountable TDFN-8Lead 3x3 with Lead-free / Green / RoHS2 compliant. Typical Input IP3 and Conversion loss are 32 dBm and 8.8dB, respecvely. All devices are 100% RF/DC screened. Product Descripon TDFN 8-Lead 3x3 mm Funconal Block Diagram • Base staon /Repeaters Infrastructure/Small Cell • Commercial/Industrial/Military wireless system • 5G/LTE / WCDMA /CDMA Wireless Infrastructure • MMD & wireless LAN Applicaons Applicaon Circuit Absolute Maximum Rangs Operaon of this device above any of these parameters may result in permanent damage. Parameter Rang Unit Operang Case Temperature -40 to +105 °C Storage Temperature -55 to +155 °C Juncon Temperature 195 °C Supply Voltage 7 V LO Power 10 dBm Input RF/IF Power 25 dBm Package Type IF Frequency BOM Value 100~500 MHz C1 N/C C2 1nF L1 27nH BM351 1 2 3 4 8 7 6 5 LO RF IF L1 VDD C1 C2
Transcript of M351 · 1 Mixer M351 2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP eRex website: ...
1
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
• +31.8 dBm Input IP3 @3.5G
• 9.0 dB Conversion Loss @3.5G
• Integrated LO Driver
• -2 to +2 dBm LO drive level
• Available 3.3 V to 5 V single voltage
• MSL 3, TDFN-8L 3x3, Green / RoHS2 compliant
• ESD HBM Class 1A
Device Features
The BM351 is a high linearity and dynamic covering range
from 2.5 GHz to 6.0 GHz on 3.3 V to 5 V with a passive GaAs
FET converter and two stage LO driver. This is packaged in a
plastic surface mountable TDFN-8Lead 3x3 with Lead-free /
Green / RoHS2 compliant. Typical Input IP3 and Conversion
loss are 32 dBm and 8.8dB, respectively. All devices are 100%
RF/DC screened.
Product Description
TDFN 8-Lead 3x3 mm
Functional Block Diagram
• Base station /Repeaters Infrastructure/Small Cell
• Commercial/Industrial/Military wireless system
• 5G/LTE / WCDMA /CDMA Wireless Infrastructure
• MMD & wireless LAN
Applications
Application Circuit
Absolute Maximum Ratings
Operation of this device above any of these parameters may result in permanent damage.
Parameter Rating Unit
Operating Case Temperature -40 to +105 °C
Storage Temperature -55 to +155 °C
Junction Temperature 195 °C
Supply Voltage 7 V
LO Power 10 dBm
Input RF/IF Power 25 dBm
Package Type
IF Frequency BOM Value
100~500 MHz
C1 N/C
C2 1nF
L1 27nH
BM351
1
2
3
4
8
7
6
5
LO RF
IFL1VDD
C1 C2
2
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Test condition _ Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V Ids= 62mA
Parameter Min Typ Max Min Typ Max Min Typ Max Min Typ Max Units
RF Frequency Range 2500~2700 3300~3700 4600~4800 5500~6000 MHz
LO Frequency Range 2300~2650 2800~3600 4100~4700 5000~5900 MHz
IF Frequency Range 50~200 50~700 50~700 50~700 MHz
SSB Conversion Loss 8.7 8.5 9.1 11.2 dB
Input IP32 28.4 26.8 36.0 23.4 dBm
LO Leakage RF Port -15.1 -3.3 1.5 -7.3 dBm
LO Leakage IF Port -22.9 -24.0 -17.2 -17.4 dBm
RF-IF Isolation -31.2 -38.6 -32.1 -30.7 dB
RF Return Loss -7.8 -20.2 -12.3 -12.1 dB
IF Return Loss -7.4 -5.6 -6.7 -17.2 dB
Input P1dB 15.3 19.6 21.1 15.6 dBm
LO Drive Level -2 0 2 -2 0 2 -2 0 2 -2 0 2 dBm
2 IIP3 is measured on two tone with RF in power 0dBm/ tone , F2—F1 = 1 MHz.
Typical Performance1
Test condition _ Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V Ids=85mA
Parameter Min Typ Max Min Typ Max Min Typ Max Min Typ Max Units
RF Frequency Range 2500~2700 3300~3700 4600~4800 5500~6000 MHz
LO Frequency Range 2300~2650 2800~3600 4100~4700 5000~5900 MHz
IF Frequency Range 50~200 50~700 50~700 50~700 MHz
SSB Conversion Loss 8.8 9.0 9.2 9.7 dB
Input IP32 27.3 31.8 38.1 28.7 dBm
LO Leakage RF Port -11.1 0.7 5.5 -1.3 dBm
LO Leakage IF Port -20.9 -22.9 -15.0 -15.6 dBm
RF-IF Isolation -31.2 -37.9 -31.5 -29.8 dB
RF Return Loss -7.0 -18.8 -12.1 -17.0 dB
IF Return Loss -7.2 -4.5 -5.3 -13.9 dB
Input P1dB 17.1 22.1 24.1 19.7 dBm
LO Drive Level -2 0 2 -2 0 2 -2 0 2 -2 0 2 dBm
1 Specifications show on 0dBm-LO drived power and 200 MHz-IF frequency in a down converting configuration with high-side LO.
Parameter Min. Typical Max. Unit
Bandwidth 2500 6000 MHz
Id @ (Vd = 5.0V) 75 85 95 mA
Id @ (Vd = 3.3V) 55 62 70 mA
RTH 99 °C/W
3
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Down converting
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. IF Freq
100M200M300M400M500M
+25°C, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. IF Freq
100M200M300M400M500M
+25°C, LO = 0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
100M200M300M400M500M
+25°C, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
R-I
Iso
lati
on
[d
B]
RF Freq [MHz]
RF-IF Isolation vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
-10
-5
0
5
10
15
20
25
30
35
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
L-R
Iso
lati
on
[d
B]
RF Freq [MHz]
LO-RF Isolation vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
L-I
Iso
lati
on
[d
B]
RF Freq [MHz]
LO-IF Isolation vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
4
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Down converting
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=100M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=300M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=100M, +25°C, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=200M, +25°C, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=300M, +25°C, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=400M, +25°C, low-side LO
5
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Down converting
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=500M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=100M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=300M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=500M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=100M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=200M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=300M, +25°C, low-side LO
6
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Down converting
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=100M, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=200M, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=500M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=400M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=500M, +25°C, low-side LO
0
5
10
15
20
25
30
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
-2dBm
0dBm
2dBm
IF=100M, +25°C, low-side LO
0
5
10
15
20
25
30
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
-2dBm
0dBm
2dBm
IF=200M, +25°C, low-side LO
7
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Down converting
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=300M, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=400M, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=500M, LO=0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
-2dBm
0dBm
2dBm
IF=300M, +25°C, low-side LO
0
5
10
15
20
25
30
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
-2dBm
0dBm
2dBm
IF=400M, +25°C, low-side LO
0
5
10
15
20
25
30
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
-2dBm
0dBm
2dBm
IF=500M, +25°C, low-side LO
8
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Up converting
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. RF Freq
2600M
3500M
4600M
5800M
+25°C, LO = 0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
100 150 200 250 300 350 400 450 500
IF
Re
turn
Lo
ss [
dB
]
IF Freq [MHz]
IF Return Loss vs. IF Freq vs. RF Freq
2600M
3500M
4600M
5800M
+25°C, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. RF Freq
2600M
3500M
4600M
5800M
+25°C, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=2.6GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=3.5GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=2.6GHz, +25°C, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=3.5GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. RF Freq
2600MHz
3500MHz
4600MHz
5800MHz
+25°C, LO=0dBm, low-side LO+25°C, LO=0dBm, low-side LO
9
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Up converting
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=4.6GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=5.8GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=2.6GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=2.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=3.5GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=3.5GHz, +25°C, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=4.6GHz, +25°C, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=5.8GHz, +25°C, low-side LO
10
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Up converting
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=4.6GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=4.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=5.8GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=5.8GHz, +25°C, low-side LO
0
5
10
15
20
25
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=2.6GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=2.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=3.5GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=3.5GHz, +25°C, low-side LO
11
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 5V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=5V, Ids=85mA , Up converting
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=4.6GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=4.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=5.8GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=5.8GHz, +25°C, low-side LO
-25
-20
-15
-10
-5
0
100 150 200 250 300 350 400 450 500
IF
Re
turn
Lo
ss [
dB
]
IF Freq [MHz]
IF Return Loss vs. IF Freq vs. RF Freq
+25°C
-40°C
+105°CRF=3.5GHz, LO = 0dBm, low-side LO
-25
-20
-15
-10
-5
0
100 150 200 250 300 350 400 450 500
IF
Re
turn
Lo
ss [
dB
]
IF Freq [MHz]
IF Return Loss vs. IF Freq vs. RF Freq
+25°C
-40°C
+105°CRF=4.6GHz, LO = 0dBm, low-side LO
12
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Down converting
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
100M200M300M400M500M
+25°C, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. IF Freq
100M200M300M400M500M
+25°C, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. IF Freq
100M200M300M400M500M
+25°C, LO = 0dBm, low-side LO
-5
0
5
10
15
20
25
30
35
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
L-R
Iso
lati
on
[d
B]
RF Freq [MHz]
LO-RF Isolation vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
L-I
Iso
lati
on
[d
B]
RF Freq [MHz]
LO-IF Isolation vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
R-I
Iso
lati
on
[d
B]
RF Freq [MHz]
RF-IF Isolation vs. RF Freq vs. IF Freq
100MHz
200MHz
300MHz
400MHz
500MHz
+25°C, LO=0dBm, low-side LO
13
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Down converting
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=100M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=100M, +25°C, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=200M, +25°C, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=300M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=300M, +25°C, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=400M, +25°C, low-side LO
14
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Down converting
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=500M, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
Co
nv
ers
ion
Lo
ss [
dB
]
RF Freq [MHz]
Conversion Loss vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=500M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=100M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=100M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=200M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=300M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=300M, +25°C, low-side LO
15
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Down converting
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=400M, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=500M, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
50
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
In
pu
t IP
3 [
dB
m]
RF Freq [MHz]
Input IP3 vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=500M, +25°C, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=100M, LO=0dBm, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=100M, +25°C, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=200M, LO=0dBm, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=200M, +25°C, low-side LO
16
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, RF to IF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Down converting
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=300M, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=400M, LO=0dBm, low-side LO
0
5
10
15
20
25
30
35
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B[d
Bm
]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. Temperature
+25°C
-40°C
+105°C
IF=500M, LO=0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=300M, +25°C, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=400M, +25°C, low-side LO
0
5
10
15
20
25
2500 3000 3500 4000 4500 5000 5500 6000
In
pu
t P
1d
B [
dB
m]
RF Freq [MHz]
Input P1dB vs. RF Freq vs. LO Power
-2dBm
0dBm
2dBm
IF=500M, +25°C, low-side LO
17
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Up converting
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. RF Freq
2600M
3500M
4600M
5800M+25°C, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
45
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. RF Freq
2600M
3500M
4600M
5800M
+25°C, LO = 0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
100 150 200 250 300 350 400 450 500
IF
Re
turn
Lo
ss [
dB
]
IF Freq [MHz]
IF Return Loss vs. IF Freq vs. RF Freq
2600M
3500M
4600M
5800M
+25°C, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=2.6GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=3.5GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=2.6GHz, +25°C, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=3.5GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. RF Freq
2600MHz
3500MHz
4600MHz
5800MHz
+25°C, LO=0dBm, low-side LO+25°C, LO=0dBm, low-side LO
18
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Up converting
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=4.6GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=5.8GHz, LO = 0dBm, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=5.8GHz, +25°C, low-side LO
0
2
4
6
8
10
12
14
100 150 200 250 300 350 400 450 500
Co
nv
ers
ion
Lo
ss [
dB
]
IF Freq [MHz]
Conversion Loss vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=4.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=2.6GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=2.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=3.5GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=3.5GHz, +25°C, low-side LO
19
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Up converting
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=4.6GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=4.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=5.8GHz, LO = 0dBm, low-side LO
0
5
10
15
20
25
30
35
40
100 150 200 250 300 350 400 450 500
In
pu
t IP
3 [
dB
m]
IF Freq [MHz]
Input IP3 vs. IF Freq vs. LO Power
-2dBm
0dBm
2dBm
RF=5.8GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=2.6GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=2.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=3.5GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=3.5GHz, +25°C, low-side LO
20
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Typical Test Data : 3.3V, IF to RF Converting
Test condition : Measured on BeRex E/B at 25°C, 50ohm system, Vdd=3.3V, Ids=62mA , Up converting
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=4.6GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=4.6GHz, +25°C, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Temperature
+25°C
-40°C
+105°C
RF=5.8GHz, LO=0dBm, low-side LO
0
5
10
15
20
25
30
100 150 200 250 300 350 400 450 500
In
pu
t P
1d
B [
dB
m]
IF Freq [MHz]
Input P1dB vs. IF Freq vs. Lo Power
-2dBm
0dBm
2dBm
RF=5.8GHz, +25°C, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
+25°C
-40°C
+105°C
IF=200M, LO = 0dBm, low-side LO
-40
-35
-30
-25
-20
-15
-10
-5
0
2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000
RF
Re
turn
Lo
ss [
dB
]
RF Freq [MHz]
RF Return Loss vs. RF Freq vs. IF Freq
+25°C
-40°C
+105°C
IF=400M, LO = 0dBm, low-side LO
21
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Package Outline Drawing
Package Marking
YY = Year, WW = Working Week,
XX = Wafer No.
Evaluation Board Drawing
22
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
Note : 1. Connection to Bottom Ground with multiple via holes.
2. Via holes _ as many as possible.
3. All Dimensions _ millimeters.
4. PCB lay out _ on BeRex website.
Pin Configuration
Pin No. Label Description
1 LO Local Oscillator Injection. Internally DC Blocked
2,3,6,7 GND RF/DC Ground.
4 Vdd Power supply for LO amplifier
5 IF Intermediate Frequency
8 RF Radio Frequency
Backside
Paddle GND
RF/DC Ground. Follow recommended via pattern and
ensure good solder attach for best thermal and electri-
cal performance.
23
Mixer
BM351
2.5 ~ 6 GHz High IIP3 GaAs MMIC Mixer with Integrated LO AMP
BeRex ●website: www.berex.com ●email: [email protected]
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2020 BeRex Rev. D
Tape & Reel
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.)
MSL / ESD Rating
NATO CAGE code:
2 N 9 6 F
ESD Rating:
Value:
Test:
Standard:
MSL Rating:
Standard:
Class 1A
Passes <500V
Human Body Model (HBM)
JEDEC Standard JS-001-2014
Level 1 at +265°C convection reflow
JEDEC Standard J-STD-020
Proper ESD procedures should be followed when handling this device.
C a u t i o n : ESD SensitiveAppropriate precautions in handling, packaging
and testing devices must be observed.
Packaging information: Tape Width 12mm
Reel Size 7”
Device Cavity Pitch 8mm
Devices Per Reel 1K
