Process Technologies for Tomorrow

Industrial Standard Mill for fine products

GeneralThe Hosokawa Mikro Pulverizer is a high-sped hammer-screen mill forcontinuous fine powder production even under severe conditions. Thematerial can be fed either by feedscrews, suction feeding or gravity feeding.

Once a mill is set to deliver a certainproduct, it will continue to produceexactly the same result without adjustment.

Features Compact Dust-Free Operation Uninterrupted Production Quick, Easy Cleaning Long Service Life No Auxiliaries

ConstructionThe Mikro Pulverizer consists of a high speed rotor assembly fitted with hammers. The grinding chamber is fitted with a cover containing a multiple deflector liner and a retaining screen at the point of milldischarge. A screw mechanism is often used to introduce feed material into the grinding chamber.

The grinding process is affected by three basis variables : the type of hammers, the rotor speed, and the size and shape of the screen opening. There are two types of hammers; the "stirrup", recommended where a fine particle size is desired; and the "knife" which generates a coarser grind with a minimum of fines.

Rotor speed affects the fineness of the grind as follows ; low speeds result in a coarse grind and high speed produce a fine grind.

liner

herringbone slot screen

round perforated screen

W type feed

SCB type feed

Standard type feed

Variations

Specifications

Test examplesMaterialActived CarbonAlminium FluorideCarbon BlackCarbon BlackPigmentAlmond MealAnimal FoodBanana, DriedBarleyCocoaCorn StarchFish Meal Granule SugarCalcium CarbonateCalcium HydroxideChalkCoal, AnthraciteKaolinCaffeineCosmetic Powder

ModelAP-2DHAP-1SHAP-4SCBAP-44SCBAP-2DHAP-1SHAP-4THAP-BAP-2DHAP-2DHAP-4THAP-2DHAP-2DHAP-2DHAP-1SHAP-4THAP-2DHAP-4THAP-1SHAP-1SH

Capacity [kg/h]220140

1,7003,700

200290

2,00095

105800

5,350300190800

672,700

3501,930

190200

Product [Mesh]95% pass 25094% pass 250Size reduction of grit.Size reduction of grit.Almost pass 30077% pass 60Almost pass 4097% pass 10095% pass 10093% pass 100Almost pass 20090% pass 8098% pass 30099% pass 10089% pass 30099% pass 32596% pass 10099% pass 20099% pass 40Intensive mixing

Inorganic Chemical

Food

Mineral

Pharmaceutical

Note: The above figures should be used only as estimates. Every material will not necessarily give the same results.

Spec. \ModelRotor [kW]Feeder [kW]Hammer [pcs]Dimension W [mm] D [mm] H [mm]

AP-1SH3.70.26

9001,1401,420

AP-2DH110.424

1,1401,3001,200

AP-3TH300.464

1,5801,9301,610

AP-4TH550.496

1,7302,2001,630

AP-44110

-144

1,3002,4001,700

Set ups

Pneumatic conveying type

Pulse Jet Collector

Mikro Pulverizer

Single mill operation

Mikro BANTAM MILL

GeneralThe Mikro Bantam Mill is part of the original Mikro Pulverizer hammer mill and screen mill family. Today, with over 4,000 installed, the mills are the standard throughout the world for producing powder coatings, foods, pharmaceuticals, chemicals, pigments, industrial minerals, plastics, etc.

ApplicationsThe Mikro Bantam Mill is ideally suited for granular to fine grinding tasks, producing batches from one liter to 200 liter in size. It is capable of dry or wet milling and provides accurate scale-up to our complete line of larger Mikro Pulverizer mills. Bituminous Coal, Calcium Tungatate, Carbon Black, Chrome Yellow, Corn Stach, Fertilizer, Grass Frit, etc.

Feature Efficient and compact Quick, easy cleaning Long production life Dry or wet milling Minimum dust Safety features Scale-up to larger mills

SpecificationsDrive motor 0.75kW 2P

Feed Screw motor 100W 4P

Grinding disc Speed Max.14,000 rpm

Number of hammers 6

Dimensions H 1870 mm

W 850 mm

L 650 mm

2016HMC ALL Rights Reserved. Printed in Japan3rd. Aug 17, 2016 (Made by HOSOKAWA MICRON CORP.)