Lycoming.360 IPC

TEXTRON Lycoming AIRCRAFT ENGINES

10, AIO-360-A, -B Series

Wide Cylinder Flange Models

PARTS CATALOG

PC140611

o,

:y;Y

I"illlllllllllllllllIIIIIIIIIIIIIIBli,;iii;i!iEl ,’i I~\ ~jl ,yl j_~

i

APRIL, 1991

I LycomingWilliamsport Plent 652 Oliver StreetTextron LycominglSubsidiary of Textron Inc. Williamsport,PA 17701 U.S.A.

7171323-6181

Lycoming

652 Oliver Street

Williamsport,PA 17701 U.S.A.

7171323-6181

TECHNICAL

PUBLICATION REVISION

REVISION No. PUBLICATION PUBLICATION No. PUBLICATION DATE

1O, AIO-360-A -B

PC-406-1C I Series PC-406-1 I APRIL, 1991

This page(s) furnished herewith are intended to replace the corresponding

page(s) of the publication indicated above.

Previous revisions to this publication This revision consists of:

October. 1995 December. 1996

1-10, 1-11, 2-14, 2-15, 2-20, 3-1, 3-8, 1-14, 2-1, 2-2, 2-3

3-9, 3-10, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6,

4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13,

5-2, Added 5-2A 5-2B, 5-3

NEW NUMERICAL INDEX PAGES

7-6, 8-1 thru 8-13

November. 1995

1-9, 2-18, 2-19, 2-20, 3-1

NEW NUMERICAL INDEX PAGES

7-6, 8-1 thru 8-13

Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsporl Plant

INTRODUCTION

This illustrated parts catalog contains a complete parts listing for the Textron Lycoming IO-360-A, -B and AIO-360-A,

-B Series wide cylinder flange model aircraft engines.

Major assembly and sub-assembly parts of the engines are listed in the Group Assembly sections in the general

sequence of engine build up.

A Service Kits section and Oversize and Undersize Parts List are included to aid in ordering parts as necessary

during overhaul

The Numerical Index is provided for convenience in finding parts when only the part number is known.

Parts coverage of Vendor Accessories used on Textron Lycoming engines may be found in the appropriate Vendor’s

Parts Catalog. A list of addresses of where to obtain these publications appears in the latest edition of Service Letter

No. L114.

NOTE

The illustrations, pictures and drawings shown in this publication are typical of the subject matter they portray.

This catalog, when used in coniunction with the appropriate overhaul manual, shall be used for parts identification

only. Under no circumstances shall this catalog be used as an assembly or installation document.

Any reference in this document to a suppliers/parts manufacturers’ product, by name, trademark, part number or

other description is solely for the purposes of identification and does not indicate or infer that Textron Lycoming ac-

cepts responsibility for quality control and/or airworthiness of parts which do not pass through the Textron Lycoming

quality control system.

All Textron Lycoming Williamsport Plant publications will bear the copyrightnotice O Textron Lycoming 1986, ’’All Rights Reserved’’, and all Textron

Lycoming publications are to be considered copyrighted and may not be

reproduced without permission of the company.

SERVICE BULLETINS, INSTRUCTIONS AND LETTERS

Although the information contained in this parts catalog is up-to-date at time of publication, users are advised to

procure current information through all Textron Lycoming distributors or from the factory by subscription. Consult

the latest edition of Service Letter No. L114 for subscription information.

HOW TO ORDER PARTS

In ordering parts for your engine, observe the following instructions which will expedite shipment of correct parts

required without delay.

a..Always specify the model and serial number of your engine.

b. Always specify Part Number, Nomenclature and quantity required.

10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

TABLE OF CONTENTS

SECTION PAGE

Introduction.Table of ContentsOversize and Undersize Parts List

1. CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUPCrankcase Assembly.Oil Level Gages and Crankcase Related Parts.............................................................1-3

Crankshaft and Counterweight Assembly.................................................................1-5Starter Ring Gear Support Assembly....................................................................1-7Crankshaft Idler Gears, Tachometer Drive and Camshaft..........................................,........1-9Crankcase Attaching Parts.............:

............._

Crankcase Attaching Parts (AIO Front Mounted Prop. Governor)........._, ...1-.13

2. ACCESSORY HOUSING AND RELATED PARTS

Accessory Housing AssemblyPropeller Governor Drives, Adapter Assembly and Covers ............2~3

Propeller Governor Oil Lines........._._._..

Oil Scavenge Pump and Oil Suction Tubes (AIO-360) .2-7Oil Filter AssemblyOil Cooler and Breather Fittings.......................................................................2-11Oil Pump Assembly and Accessory Housing Attaching Parts. .........2-13Vacuum Pump Drives and Covers...................................................................~..2-15Vacuum Pump and Propeller Governor (Dual Drive). .2-17Fuel Pump and Fuel Pump Covers.....................................................................2-19

3. CYLINDER, PISTON AND VALVE TRAIN

Connecting Rod, Piston and Ring Assemblies............................................................~3-1

Cylinder AssemblyValve Assembly

........._.......

Cylinder Related Parts

Cylinder Head Drain Tubes and Intercylinder Cooling Baffles. .........3-9

4. IGNITION SYSTEM

Magnetos and Magneto Drives (IO-360-A)................................................................4-1Ignition Harnesses, Spark Plugs and Attaching Hardware (IO-360-A). ...4-3Magnetos and Magneto Drives

Ignition Harnesses, Spark Plugs and Attaching Hardware (IO-360-B). ...4-7

Magnetos and Magneto Drives (AIO-360).:..............................................................4-9Ignition Harnesses, Spark Plugs and Attaching Hardware (AIO-360). ..4-11Dual Magnetos and MagnetoIgnition Harnesses, Spark Plugs and Attaching Hardware (Dual) .......4-14

5. ELECTRICAL SYSTEM

Alternator and GeneratorMounting Brackets.............. ...........5-1100 Amp Alternator Mounting and Attaching Parts.

........._.__.. 5-3Alternator Assembly and Belt........ .............5-5Starter Motor and Attaching Parts. .5-7

6. OIL SUMP AND INDUCTION SYSTEMOil Sump Assembly and Oil SuctionCrankcase Covers and Induction Housing (AIO-360) ~6-3Intake Pipes.Fuel Injectors and InjectionFuel Manifolds and Brackets

Fuel Lines and AttachingFuel Hoses and Attaching PartsFuel Hoses and Attaching Parts (ATO-360)..........................................

7. SERVICE KIT

8. NUMERICAL INDEX.

rl8cirr~l Lycoming 10, AIO-360´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Oversize and Undersize Parts Listing

PART NO. DESCRIPTION OVERSIZE UNDERSIZE

P02 P05 P75 P10 P125 P15 P20 P30 P40 P50 M03 M06 MiO

.002 .005 .0101.01251.015 .020 .030 .040 .050 .003 .006 .010

61681 GUIDE SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1256 FOR APPLICATION.

66145 DOWEL X X

66610 BUSHING X X

66670 BUSHING X X


66796 INSERT X

69260 INSERT X

69796 DOWEL X

72057 SEAT X X X I X

72058 SEAT X X X

72060 BUSHING X X XIX

72061 BUSHING X X X X

72062 BUSHING X X X X

72074 BUSHING X X X


73810 BUSHING SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1142 FOR APPLICATION.


74248 BUSHING X X X

74249 BUSHING X X X

74309 BEARING X X* X* X


LW-11021 BEARING X X´• X´• X´•

LW-11997 SEAL SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1324 FOR APPLICATION.

LW-12688 SEAT X X X

LW-1 3212 BEARING X X* X* X*

LW-1 3521 BEARING X X* X* X*

LW-1 3522 BEARING X X X

LW-13792 SEAL SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1324 FOR APPLICATION.

LW-I 3884 BEARING X X X X´•

LW-16711 BEARING X X X

STD-1065 DOWEL X X X X


16T19468 SEAT X X I X

Studs available in P03, P07 and P12.

Also available in P10 oversize.

Also available in P15 oversize.

NOTE

When ordering oversize and undersize parts, be sure to specify the required oversize and undersize dimension along with the proper part

number. For example, to order bearing LW-13884 in .003 undersize, order part number LW-13884-M037 Oversize code letter is "P’’ while under-

size code letter is "M". These letters are then followed by the number designating the size in thousandths of an inch.

iii Revised November, 1995

I Lycoming

Williamsport Plant

TECHNICAL PUBLICATION

SUPPLENIENT

SUPPLEMENT No. ENGINE MODEL I PUBLICATION No. PUBLICATION DATE

1O, AIO-360-A -BSSP-291 Series

PC-406-1 April, 1991

This supplement is arranged in the same basic format as the original parts catalogInsert in front of catalog for useage of subject matter.

AEROBATIC CONFIGURATIONS

Figure 3A Thicker Flange Crankshaft for Aerobatic Configuration

a Figure 34A Oil Sump Assembly, Suction Screen and Aerobatic Components

a For all other parts, use PC-406-1 and look under the IO-360-xxxx listing.

This SSP-291 replaces SSP-984-1 dated January, 1985.

Williamsport Plant

SSP-291 Page 1

Figure 38 Thicker Flange Crankshaft For Aerobatic Gonfiguration

CRANKSHAFT

Engine Model Nomenclature Aerobatic

Configuration

Production

AEIO-360-A1A CRANKSMAFT PLUG ASSEMBLY 13817176

AEIO-360-A1B CRANKSHAFT PLUG ASSEMBLY 13817176

AEIO-360-A1B6 CRANKSHAFT PLUG ASSEMBLY LW-17258

AEIO-360-A1D CRANKSHAFT PLUG ASSEMBLY 13817176

AEIO-360-B1F CRANKSHAFT PLUG ASSEMBLY 13817177

AEIO-360-82F CRANKSHAFT PLUG ASSEMBLY 1 13817178

AEIO-360-84A CRANKSHAFT BUSHING ASSY 13817144

10-360 Models that could be field converted for Aerobatic use

IO-360-A1B6D CRANKSHAFT PLUG ASSEMBLY LW-17261

IO-360-A1C CRANKSHAFT PLUG ASSEMBLY 13817176

IO-360-A1D6 CRANKSHAFT PLUG ASSEMBLY LW-17258

IO-360-A2A CRANKSHAFT PLUG ASSEMBLY 13817180

IO-360-A2B CRANKSHAFT PLUG ASSEMBLY 13817180

IO-360-A386D CRANKSHAFT PLUG ASSEMBLY LW-17262

10-360-818 CRANKSHAFT PLUG ASSEMBLY 1 13817177

IO-360-B1D CRANKSHAFT PLUG ASSEMBLY 13817177

IO-360-B1E CRANKSHAFT PLUG ASSEMBLY 13817177

IO-360-B2F6 CRANKSHAFT PLUG ASSEMBLY LW-17260

CL~I: I Lycoming

Williamsport Blant

SSP-291 Page 2

Figure 3A (Continued)- Bushing Locations

NO. 1

CRAN#PIN72155

79024 /-75656

INDEX

875656-/ XO) ’-75656

72155-/ NO. 1

llW-172621CRANKPIN

17262 75656

7565775656

INDEX

O72155

13817176

13817177NO. 1

13817180CRANKPIN7 /-LW-18819

LW-1 7258LW-18819 LW-17260

LW-1 8818 LW-17261INDEX

LW-18819LW-18819

LW-1 881

113817144 11138171781

I Lycoming

Williamsport Plant

SSP-291 Page 3


ore SUMP AND INDUCTION SYSTEM

011 SUMP ASSEMBLY, SUCTION SCREEN AND AEROBATIC COMPONENTS

O OUANTITY PER ASSEMBLY

FIG. N AEIO-360

REF. PART AIAIAIAIAlel~leDESCRIPTION L 1 1 1 1 124

NUMBER LIA B B D F F A34A

1 LW-13353 GASKET, Oil su 1

2 LW-13864 SUMP ASSY., Oil 1 1 1 1

LW-13861 SUMP ASSY., Oil 1 1 1

3 78914 CONNECTION, Intake 4 4 4

4 61400 STUD, 114-20 x 1-3116 6 6 6 6 4 4 4

5 31C-14 STUD, 5116-18 x 1-3/4 4 4 4 4

6 31C-17 STUD, 5/16-18 x 2-1/8 4 4 4

7 1102 PLUG, 118-27 NPT Alien head 1 1 1 1

8 STD-91 PLUG, 112-14 NPT, Alien head 1 1 1

9 STD-551 PLUG, 1/2-14 NPT, hd., drilled 3 3 3 3 4 4 4

10 ISTD8 WASHER, 114 26 26126 28128

11 STD-160 WASHER, 114 lock, internal teeth

12 STD-1204 BOLT, 114-20 x 15/16 hex. hd. 12112112112114114114

13 LW-25-0.94 BOLT, 114-20 x 1-1/8 hex, hd. 2

14 LW-25-1.13 NUT, 114-20 12

15 lLW-13752 PLUG, 1

16 50004-111 RING, "O" 1

17 1 LW-13888 SCREEN, Oil suction 1

70484 SCREEN, Oil suction (4.50 1 1

18 ILW-13751 FITTING, Su oil suction 1

19 50004-018 RING, "O" 1

20 LW-14035 FITTING, Su oil suction 1 1

21 IAN-900-16 RING, "O" 1 1

22 lLW-13753 FITTING, oil strainer 1 1 1 1 1

23 ILW-15394 FITTING, oil strainer 1450

111

24 1 LW-14149 FITTING, oil strainer 1

25 LW-15393 FITTING,Sum oilstrainer 1 1 1 1NOI’E

26 LW-16712 FITTING, oil strainer 1

27 1 LW-13754 FITTING, oil return 1"Breather Option"

28 llW´•14148 FITTING, oil return 1 1

29 LW-14247 FITTING, oil return (ni 1 A visual check should

30 57A21009 SEPARATOR, Oil 1 be made to determine

31 LW-13755* TEE, Breather I which optional installa-

32 57819829 VALVE, Oil 1 tion is applicable on any

33 50004´•027 RING, "O" 1 given engine model.

34 LW-16878**+ ADAPTER, Breather II

See Figure 1 on illustration page for useage.See Figure 2 on illustration page for useage.Not used if vacuum pump is installed.

Lycorniirrg 10, AIO´•360´•d~, ´•B SERIES PARTS CATALOGWIDE CYLINDER F1ANGE CRANKCASE MODEL ENGINES

Williamsport Plant

SSP-291~-1´•4 Page 4

/ii-i

I

s

c~.

34~71 ~t"_;n,i I,

ii;OVERBOARD

LINE

Q

BREATHER

17 ’i 323

3J:9i292419 21

27 28

,6~-15 20

Figure 2

~I:Ij

224rI;i20

19f2ij"Figure 1

Inverted Oil System With Breather Tee

26 27 28 29

Figure 34A. OIL SUMP ASSEMBLY, SUCTION SCREEN AND AEROBATIC COMPONENTS

SUPPLEME NTAL P AR TS L I ST

S S P 295

F E B R U AR Y 1 995

To Provide Parts Coverage for Textron Lycoming Model

IO-360-A3B6 Aircraft EnginesWhen Used in Conjunction With PC-406-1:

10, AIO-360-A, -B Series Parts Catalogdated April 1991

This supplement is arranged in the same basic format

as PC-406-1. The Reference Numbers match the Text

andlllustration Pages or they are marked as ’1Vot

Applicable.

652 Oliver Street


Lycoming IO-3MI-A3B6 Supplement to PC-406-1

SE´•CTION 1 CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUP

Figure 1- CRANKCASE ASSEMBLY, Pages 1-1 1-2

QTY. PER

ASSEMBLY

1 -1 1 2 2

T. 1 ilx 1 2

ii 1

24 73772 NOZZLE ASSY., Piston cooling 4

NOTE

This part is not available as a service item. Refer to Service Kit

Section 7 for applicable Crankcase Assy. and Governor Stud Kit

part number.

SSP-295 1 Februa ry 1 995

Lycoming I0360-A3B6 Supplement to PC-406-1

SECTION 1 CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUP

Figure 2 OIL LEVE L GAGE S AND CRANKCASE R E LATE D PARTS, Pages 1-3 1-4

QTY. PER

ASSEMBLY

7"

20 Not Applicable

Select spring to give a minimum of three threads exposed on adjusting screw to allow field

adjustment. Reference latest revision of SSP-1776, Part 1 for spring identification.

Refer to latest edition of Textron Lycoming Service Instruction No. 1324.

SSP-295 2 F ebrua ry 1995

Lycoming IO-360-A3B6 Supplement to PC-406-1


Figure 3 CRANKSHAFT AND COUNTE RWE IGHT ASSE MBLY, Pages 1-5 1-6

QTY. PER

ASSEMBLY

1211

7 1

71

-1

19 71907 WASHER, Dynamic counterweight 8

NO. 1

CRANKPIN l-1O

8 ~"1INDEX

?111

10

SSP-295 3 February 1995

Ly~oming IO-360-A3B6 Supplement to PC-406-1


Figure 4 STARTE R R ING GEAR SUPPORT ASSEMBLY, Pages 1-7 1-8

QTY. PER

ASSEMBLY

2 72566 GEAR, Starter ri 12/14 pitch 1

Figure 5 CRANKSHAFT IDLE R G EAR S, TACHOME TE R DR IVE AND CAMSHAFT,Pages 1-9 &1-10

QTY. PER

ASSEMBLY

30 1 76118 SPACER, Tachometer shaft centering 1




Figure 6 CRANKCASE ATTACHING PARTS, Pages 1-11 &1-12

QTY. PER

ASSEMBLY

141

2 2

24 1 76220 STUD, 1/2-20 x 10-11/16 long 4

Figure 6A CRANKCASE ATTACHING PARTS (Front Mounted Prop. Governor),Pages 1-13. 1-14

NOT APPLICABLE to IO-360-A3B6



SECTION 2... ACCESSORY HOUSING AND RELATED PARTS

Figure 7 ACCESSORY HOUSING ASSEMBLY, Pages 2-1 2-2

QTY. PER

ASSEMBLY

24 Not Applicable


rl~ctrlril:l Lycoming IO-360-A3B6 Supplement to PC-406-1

SE CTION 2 ACCE SSORY HOUSING AND R E LATE D PARTS

Figure 8 PR O PE LLE R GOVE R NOR DR IVES, ADAPTE R ASSE MBLY AND COVE R S,

Pages 2-3 2-4

QTY. PER

ASSEMBLY

1 2

1 1

36 Not Applicable

SSP-295 7 Februa ry 1995

I1J:llrl´•l:l Lycoming IO-360-A3B6 Supplement to PC-406-1

SE CTION 2 ACCE SSORY HOUSING AND R E LATE D PARTS

Figure 9 PROPELLER GOVERNOR OIL LINES, Pages 2-5 2-6

QTY. PER

ASSEMBLY

13 Not Applicable

Figure 10 OIL SCAVENGE PUMP AND OIL SUCTION TUBES (AI0360),Pages 2-7 2-8

NOT APPLICABLE to I0360-A3B6




Figure 11 OIL FILTER ASSEMBLY, Pages 2-9 2-10

QTY. PER

ASSEMBLY

30 Not Applicable

NOTE

See latest edition of Textron Lycoming SSP-885 for oil filter kits and replacement filters.


I0366-A3B6 Supplement to PC-4D6-1

SECTION 2 ACCESSORY HOUSING AND R E LATE D PARTS

Figure 12 OIL COOLER AND BREATHER FITTINGS, Pages 2-11 2-12

QTY. PER

ASSEMBLY

29 Not Applicable


L1Jlllr~l:l Lycoming IO-360-A3B6 Supplement to PC-406-1

SE CTION 2 ACCESSORY HOUSING AND R E LATE D PARTS

Figure 13 OIL PUMP ASSEMBLY AND ACCESSORY HOUSING ATTACHING PARTS,

Pages 2-13 2-’14

QTY. PER

ASSEMBLY

19 Not licable

When ordering, use P/N 05K 19423-S OIL PUMP IMPELLER KIT. Refer to the latest edition

of Textron Lycoming Service Bulletin No. 456 for kit availability.

14,15,16

iB;rs!~a,

14,15,16

14,15,18A

14,15.16


IO-360-A3B6 Supplement to PC-406-1


Figure 14- VACUUM PUMP DRIVES AND COVERS, Pages 2-15 &2-16

QTY, PER

ASSEMBLY

16 STD-1411 NUT, 1/4-20 plain 4

Figure 15 VACULTM PUMP AND PROPELLER GOVERNOR @ual Drive),Pages 2-17 2-18




SE CTION 2 ACCESSORY HOUSING AND R E LATE D PARTS

Figure 16 FUEL PUMP AND FUEL PUMP COVERS, Pages 2-19 2-20

QTY. PER

ASSEMBLY

23 Not Applicable

Assemble in fuel pump outlet.

SSP-295 13 February~995


SECTION 3... CYLINDER, PISTON AND VALVE TRAIN

Figure 17 CONNE CTING ROD, PISTON AND R ING ASSEMBLIE S, Pages 3-1 32

QTY. PER

ASSEMBLY

10 141-121950 RING, Piston, oil regulating 4




Figure 18 CYLINDER ASSE MBLY, Pages 3-3 3-4

QTY. PER

ASSEMBLY

17 1102 PLUG, 1/8-27 NPT, Alien 4


Ill~ltw:l Lycoming IO-360-A3B6 Supplement to PC-406-1


Figure 19 VALVE ASSEMBLY, Pages 3-5 3-6

QTY. PER

ASSEMBLY

25 LW-18661 SEAL, Shroud tube (green) 16


IO-3~0-A3B6 SupplementtoPC-406-l


Figure 20 CYLINDE R R E LATE D PARTS, Pages 37 3-8

QTY. PER

ASSEMBLY

-24"

x7

21 1 1

27 STD-1410 NUT.5/16-18 lain 8

See latest edition of Textron Lycoming Service Instruction No. 1060 for complete push rod

application.




Figure 21 CYLINDER HEAD DRAIN TUBES AND INTERCYLINDER COOLING BAFFLES,Pages 3-9 3-10

QTY. PER

ASSEMBLY

17 1 STD-1686" SCREW, No. 10-32 x 7/16 long, fill. hd. 1

Assemble in front of no. 1 cylinder head.



SECTION 4... IGNITION SYSTEM

Figure 22 MAGNETOS AND MAGNETO DRIVES (IO-360-A), Pages 4-1 &4-2

QTY. PER

ASSEMBLY

14 Not Applicable

Refer to the latest enition of Textron Lycoming Service Bulletin No. 516.


Lycoming Io-360-A3B6 Supplement to PC-406-1

SECTION 4... IGNITION SYSTEM

Figure 23 IGNITION HAR NE SSES, SPAR K PLUGS AND ATTACHING HAR DWAR E

(IO-360A), Pages 4-3 4-4

QTY. PER

ASSEMBLY

01P19762-2-7"" BAG, Magneto harness attaching 1

Item No. 2A spark plugs used in current production only. Additional spark plugs are availablefor these engines. See latest edition of Service Instruction No. 1042 for complete listing of all

approved spark plugs.

See page 4-4 for a breakdown of individual parts contained in the magneto and harness attach-

ing parts bag. These parts to be attached by customer per engine line drawing included in each

bag.

Figures 24 thru 29 MAGNETOS, DRIVES, HARNESSES, SPARK PLUGS,Pages 4-5 thru 4-14




S E CTIO N 5 E LE CTR ICAL SYSTE M

Figure 30 ALTE RNATOR AND GENERATOR MOUNTING BRACKETS, Pages 5-1 52

QTY. PER

ASSEMBLY

30 1 STD-713 PIN, Cotter, 3/32 dia. x 3/4 1 1

Figure 31 100 AMP ALTERNATOR MOUNTING ATTACHING PARTS,Pages 53& 5-4

NOT APPLICABLE to 1O-360-A3B6



SECTION 5... ELECTRICAL SYSTEM

Figure 32 ALTE R NATOR ASSE MBLIES AND BE LTS, Pages 5-5 5-6

QTY. PER

ASSEMBLY

40 37A 19773-376 BELT,Alternatordrive 3/8 wide 1

NOTE: See latest edition of Textron Lycoming Service Instruction No. 1 154 for complete listing ofFAA approved starters, generators, alternators, regulators and relays.


Lycoming IO-360-A3B6 Supplemedto PC-406-1

SECTION 5 E LE CTR ICAL SYSTE M

Figure 33 STARTER MOTOR AND ATTACHING PARTS, Pages 5-7 80 5-8

QTY, PER

ASSEMBLY

15 STD-1410 NUT, 5/16-18 plain 3

Refer to latest edition of Textron Lycoming Starter Maintenance Manual SSP-490 for complete

parts breakdown.

Refer to latest edition of Textron Lycoming Service Instruction No. 1447 for shim application.

1C

12

Ic I

t 13

14



SECTION 6... OIL SUMP AND INDUCTION SYSTEM

Figure 34 OIL SUMP ASSE MBLY AND OIL SUCTION SCR E EN, Pages 6-1 6-2

QTY. PER

ASSEMBLY

22 LW- 12545 PLUG, 5/8 hex. hd. x 1.00-20 thd. 1

Figure 35 CRANKCASE COVERS INDUCTION HOUSING (AIO-360),Pages 6-3 6-4

NOT APPLICABLE to I0360-A3B6


rl ~e 1 r~ z I Lycoming IO-360-A3B6 Supplement to PC-406-1

SECTION 6... OIL SUMP AND INDUCTION SYSTEM

Figure 36 INTAKE PIPES, Pages 6-5 6-6

QTY, PER

ASSEMBLY

11 Not Applicable


IliCCIIT´•1;I Lycoming IO-360-A3B6 Supplement to PC-406-1

SECTION 6... OIL SUMP AND INDUCTION HOUSING

Figure 37 FUE L INJE CTORS AND INJE CTION NOZZLES, Pages 6-7 6-8

QTY. PER

ASSEMBLY

9 Not ADDlicable


i Inrlr~:l Lycoming IO-360-A3B6 Supplement to PC-406-1

SECTION 6 OIL SUMP AND INDUCTION SYSTE M

Figure 38 FUEL MANIFOLDS AND BRACKETS, Pages 6-9 6-10

QTY. PER

ASSEMBLY

1102 1 P

18 Not Applicable



SECTION 6... OIL SUMP AND INDUCTION HOUSING

Figure 39 FUE L LINES AND ATTACHING PARTS, Pages 6-11 6-12

QTY. PER

ASSEMBLY

11 Not Applicable


i Lycoming IO-360-A3B6 Supplement to PC-406-1

SECTION 6... OiL SUMP AND INDUCTION SYSTEM

Figure 40 FUEL HOSES AND ATTACHING PARTS (10-360), Pages 613 6-14

QTY. PER

ASSEMBLY

18 Not Applicable

Figure 41 FUEL HOSES AND ATTACH~G PARTS (AI0360),Pages 6-15 6-16




SECTION 7 SERVICE KIT SECTION

Seal and Gasket Set 75441-1,See Page 7-1

Cylinder, Piston and Ring Assy. Page 7-2 Not ApplicablePage 7-3 Not ApplicablePage 7-4 Not Applicable05K21120, See Page 7-5

See Page 7-6 Qty.

CRANKCASE ASSY. GOVERNOR STUD KIT llB20061-1SGS 1Crankcase Assembly (See Figure 1) 11B20061-1SL 1Thru Stud 76220 4

Spacer 74887 2Nut STD-2090 2

Plug, 1/8 pipe 1102 6

PLUG, 1/16 pipe (piston squirts) STD-1339 4TAG Thin wall bearing SSP-582 1TAG Piston cooling nozzles SSP-272 1


Lycaming 1O, AIO´•360´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUP

CRANKCASE ASSEMBLY

QUANTITY PER ASSEMBLY

FIG. N 10´•360 AIO´•360

REF. PART A AA Al A 3 B

1 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A B

LllB611D22611112F411tA86DCD6ABDBDEFFGAABB

1 1 1 B 20061- 1 DL CRANKCASE ASSEMBLY 1 1

11B20061-1SH CRANKCASE ASSEMBLY 1

1 1 B 20061- 1 S L CRANKCASE ASSEMBLY 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-18389 CRANKCASE ASSEMBLY 1 1 1

LW´•18399-1 CRANKCASE ASSEMBLY 1

2 75154 STUD, 1/2-13 x 10-1/32 2

I 3 50´•15 STUD, 1/2-13 x 1-718 long 184 38-13 STUD, 3/8´•16 x 1-5/8 16116116116116116113116 611611611611 1611611611 1 16116

5 380-17 STUD, 3/8-16 x 2-1/8 ,drilled 1

6 38-22 STUD, 3/8-16 x 2-314 1 11

7 LW-13793 STUD, 5116-18 x 15/16 drilled 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

8 31C-12 STUD, 5/16-18 x 1-112 2

9 31C´•13 STUD, 5/16´•18 x 1-5/8 1

10 38-22 STUD, 318-16 x 2-314 1

11 125C-10 STUD, 114-20 x 1-114 2 2 2

12 25CD-14 STUD, 114´•20 x 1-314 ,drilled 2 2 2

13 72158 BUSHING, Gov. drive idler shaft 1 1 11

14 STD-557 DOWEL, 112 dia. x11/16 ,hollow 2

15 STD-514 DOWEL, 5/16 dia, x 1/2 2

16 69796 DOWEL, Crankshaft 2

18 STD-1623 INSERT, 1/4-20 Helicoil x 3/8 2

19 1 65007 R RETAINER, Shroud tube seal 8 8 8 8

20 1102 PLUG, 118-27 NPT, Alien 6 6 6 6 6 6 5 6 6 6 6 6 6 6 6 6 6 6 6 6

21 1 STD-1339 PLUG, 1116-27 NPT, Alien 1 4 4 4 4 4 4 4 1 1 1

22 1310-18"" STUD, 5/16-18 x 2.00 4 4 4 4

23 31C-14* STUD, 5/16-18 x 1-314 4

24 73772 NOULE ASSY., Piston 4 4 4 4 4 4 4 4 4 4 414 4

Early crankcases used item no. 19, PIN 65007 retainer, installed in shroud tube bosses. Later crankcases are machined as a productimprovement to accept shroud tubes without retainers. This part is a service item only.Woodward governor."AN" governor.

NOTE

This part is not available as a service item. Refer to Section 7, Service Kits, Page 7-6 for applicable Crankcase Assy.and Thru Stud Kit part number.

Revised November, 1995 1-i

LI~C i~:llycoming 10, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

12

11

o

O i~.i

S/7 a J

sLI 9

15

2 24

1

;e

ii20

1

bl22.233

o

o~G´•

f~\

i:e ~il,o10

Figure 1. CRANKCASE ASSEMBLY

1-2

10, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

CRANKCASE, CRANKSHAFT AND OAMSHAFT GROUP

OIL LEVEL GAGES AND CRANKCASE RELATED PARTS

QUANTITY PER ASSEMBLYFIG. N 10´•360 AIO´•360

A AREF. PART A A 3 B2 NUMBER DESCRIPTION LIAIA 1 B A Al A A B B B B B B 2 B A A B

L11B611D22611112F4111ABGDCDGABDBDEFFGAABB

1 75735 TUBE, Oil level short 1

75767 TUBE, Oil level intermediate 1 1 1 1 1 1 1 1 1

75736 TUBE, Oil i 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-12789 TUBE ASSY., Oil level i 2-13/16

i 1

78626 TUBE ASSY., Oil level 15-1/8 1

2 77962 ADAPTER, Oil level 1

3 72059 GASKET, Oil level 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4 74068 RING, Oil level seal 1 1 1 1 1 i 1 1 1 1 1 1 1 111

74065 RING, Oil level seal 1 1 1 1 1 1 1 1 1

72312 RING, Oil seal, 1.00 I.D. x 1/8 section 1 1 1

5 LW-14759 GAGE ASSY., Oil level 1

LW-14780* GAGE ASSY.. Oil level 1 1

LW-14758 GAGE ASSY., Oil level 1 1 1 1 1 1 1

LW-14760 GAGE ASSY., Oil level 1 1 1 1 1 1 1 1 1

LW-14769* GAGE ASSV., Oil level, intermediate 1 1 1 1 1 1 1

LW-i47259 GAGE ASSY., Oil level 1

LW-14733~ GAGE ASSY., Oil level 1 1

LW-14763´• GAGE ASSY., Oil level 1

‘6 74524 RING, Oil level 1 1

7 1028-8 BALL, 11/16 diameter i

8 61084, SPRING, Oil relief valve 1

LW-11713, Oil relief valve 1

68668, Oil relief valve 1

77467, SPRING, Oil relief valve 1

LW-18085, SPRING. Oil relief valve 1

9 STD´•425 WASH No. 10 AR

10 06E19769-1.25 GASKET, 1-114 I.D. x 1-1/2 O.D. x 3/32

annular 1

11 176529 CAP, Oil relief 1 1 1 1 1 1 1 1 1 1 1 i i 1 1 1 1

12 177808 VALVE ASSY., Oil relief, 1 1 1 1 1 1 1 1 1

13 LW-11021 BEARING, Crankshaft 4

LW-16047 BEARING, Crankshaft (alternate 4

18D19394 BEARING, Crankshaft (alternate 4

LW-16711 BEARING, Crankshaft wall,crush 4 4 4 4 4 4 4 4 4 4 4

14 1 LW-13884 BEARING, front 2

18A19441 BEARING, Crankshaft, front 2

15 1 LW-13792~ SEAL, Crankshaft oil, solid 1

LW-11997~ SEAL, Crankshaft oil, 1

16 172075 SEAL, Oil, 3/32 section x 15/32 I.D. 2

17 172091 RING, Oil seal, 23/64 I.D, x 7/64 dia.

section 2

18 72877 BODY 8

19 77120 FITTING ASSY., Crankcase breather 1 1 1

20 MS29512-12 SEAL, Oil, 7/64 dia. section x 59164 I.D. 1 1 1

Revised November, 1995 1-3

L i ~ICi lT´•1:I Lycoming 1O, AIQ´•360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Used with PIN 75735 oil level gage tube and PIN 74068 oil level gage seal ring.Used with PIN 75763 oil level gage tube and PIN 74065 oil level gage seal ring.Used with PIN 75736 oil level gage tube and PIN 74068 oil level gage seal ring.Used with PIN 77962 oil level gage adapter and PIN 72312 oil seal ring.Used with P/N LW-12789 oil level gage tube assy. and PIN 72312 oil seal ring.Used with PIN 78626 oil level gage tube assy, and PIN 74065 oil level gage seal ring.Select spring to give a minimum of three threads exposed on adjusting screw to allow field adjustment. Reference latest revision of

SSP-1776, Part 1 for spring identification.

See latest edition_of Textron Lycoming Service Instruction No, 1324.

18

16

-1i

i"-1I rY O

~4

i\o

~I\Iii

I ‘t´•.´•

I rl a r´•17

20

19

Figure 2. OIL LEVEL GAGES AND CRANKCASE RELATED PARTS

1-4


CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUPCRANKSHAFT AND COUNTERWEIGHT ASSEMBLY

OQUANTITY PER ASSEMBLY

FIG. N 10-360 AIO´•360

REF. PART AB

A A

3 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A BLllB611D22611112F4111

ABGDCDGABDBDEFFGAABB1 13817283 CRANKSHAFT 8 C’WT. ASSY. 1

13817273 CRANKSHAFT 8 C’WT. ASSY. 1 1

13817275 ´•CRANKSHAFT 8 C’WT. ASSY. 1

13817276 CRANKSHAFT 8 C’WT. ASSY. 1

2 138171319 CRANKSHAFT 8 BUSHING ASSY. 1

13817132$ CRANKSHAFT 8 BUSHING ASSY. 1

13817256 CRANKSHAFT PLUG ASSEMBLY I I I I I I I I I I I I I I I Il13817166 CRANKSHAFT 8 PLUG ASSEMBLY 1 1 1 1

19817167 CRANKSHAFT 8 PLUG ASSEMBLY 1 1

13817179 CRANKSHAFT 8 PLUG ASSEMBLY 1 1113817246 CRANKSHAFT 8 PLUG ASSEMBLY 1 1

138 17248 CRANKSHAFT 8 PLUG ASSEMBLY 1

13817249 CRANKSHAFT 8 PLUG ASSEMBLY 1

13817160* CRANKSHAFT 8 PLUG ASSEMRLY 1 1 1 1

13817161* CRANKSHAFT 8 PLUG ASSEMBLY 1

13B17162~k CRANKSHATT 8 PLUG ASSEMBLY 13 STD-1211 PLUG, 2.00 dia. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 114 1102 PLUG, 1/8-27 Alien 1 i 1 1 1 1 1 1 1115 STD-1065 DOWEL, 19/64 x 114 dia.

x 35/64 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 16 STD-2078 DOWEL, 3/8 O.D. x 1/2 1 1

7 61510* PLUG, 1-314 O.D. 1 1 1 1

74711 PLUG, 1-1/4 O.D. (1/8 N 1 1 1 1 1 1 1 1 1 1 1 1 18 7206(18 BUSHING, 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BUSHING, 1

9 742485 BUSHING, indexi

74248-S BUSHING,

10 172061-8 short 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 11172~-S f BUSHING, short 1

11 172062-8 BUSHING, 4 4 4 4 4 4 4 4 4 3 4 4 4 4 4 4 4 4472062-5 BUSHING, 4

12 1742498 BUSH 5

74249-3 e BUSHI 513 72074-S BUSHING

14 173810 BUSHING, Crankshaft, c’wt. 4 4 4 4 415 1 LW-19227 COUNTERWEIGHT ASSEMBLY 2 2 2 2 2

I 17 14W21696 ROL!.ER, Dynamic c’wt., 8th order I 12 2 2 21 1 I I 1 12

16 71903-A BUSHING 8 8 8 8 8

72797 ROLLE~ c’wt., 6.3 order 2 2 2 2 2

18 LW-1 4820 RING, Internal 88 8 8 819 171907 WASHER, 8 8 8 8 8

Revised November, 1995 1-s

to, AIDdGO´•A, -E SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Controllable pitch propeller.Fixed pitch propeller.Fixed pitch Sensenich propeller, longer propeller bushings.Solid crankshaft, fixed pitch Sensenich propeller, longer propeller bushings.Solid crankshaft, fixed pitch propeller.

NOTE

Before converting any engine to aerobatic configuration, reference the latest edition of Textron Lycoming Service

Bulletin No. 465 and Special Service Publication SSP-291 tor proper crankshaft.

1871719

CRANKPIN ~11

NO. 1

~L3! INDEX 1

2ra

1) 11

5,6-’ i NO. 1 11--/ 13817132

CRANKPIN 13817160

13817161

2 13817166NO. 1 INDEX 13817167

CRANKPIN 10 13817179

INDEX/ ~v ~113517246

135 17248 ’11

13B 17256

12 12!

12 1381713111- "-11 13817162

10 13517249

Figure 3. CRANKSHAFT AND COUNTERWEIGHT ASSEMBLY

1-6 Revised November, 1995


CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUPSTARTER RING GEAR SUPPORT ASSEMBLY


FIG. N 10´•360 AIO´•360

REF. PART AB

A A

4 NUMBER DESCRIPTION L/AIA 1 B A A 1 A A B B B B B B 2 B A A BL11B611D22611112F4111

ABGDCDGABDBDEFFGAABB1 LW-16064* SUPPORT ASSY., Starter ri 1 1 1 1 1

75221* SUPPORT ASSY., Starter ri 1 1 1 1 1 1

775791t SUPPORT ASSY., Starter ri 1

75030 a SUPPORT ASSY., Starter ri 1 1 1 1 1 1 1 1 1

LW-10504$ SUPPORT ASSY., Starter ri 1

LW-164711 SUPPORT ASSY., Starter ri 1 1

74977, SUPPORT ASSY., Starter ri 1

2 72566 GEAR, Starterri 12/14 1

1.91:1 drive.

2.50:1 drive, provision for de-icing.3.20:1 drive, no provision for de-icing.3.20:1 drive, provision for de-icing.3.20:1 drive, for 7mm and Ilmm belts.

1 3.20:1 drive, has additional timing marks.

3.20:1 drive, dual groove, no provision for de´•icing.

1-7

Lycoming 14 AIO´•360-A, -B SERIES PARTS CATAU)OWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

i,rll

2

1

oin

N

Figure 4. STARTER RING GEAR SUPPORT ASSEMBLY

1-8


CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUPCRANKSHAFT IDLER GEARS, TACHOMETER DRIVE AND CAMSHAFT


FIG. N 10´•360 AIO-360

REF. PART A Al A 3 BA A

5 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A BL11B611D22611112F4111

ABGDCDGABDBDEFFGAABB1 72230 SHAFT, idler 1

2 72829 LOCKPLA 1/4 bolt x 1´•314 1

1 3 LW-25-0.63 SCREW,1/4-20x 5/8 long,hex.hd. I I I I I I I I I 1 124 72231 GEAR ASSY., Fuel idler 1

5 77309 BUSHING, Crankshaft idler 1

6 61544 FLU Fuel 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 17 74996 GEAR ASSY., Crankshaft idler, 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 18 77309 BUSHING, Crankshaft idler, 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 19 75072 GEAR ASSY., Crankshaft idler i 1 i 1 1 1 1 1 1 1 1 1 1 1 1 1 110 77309 BUSHI Crankshaft idler 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11

11 I LW-10296* GEAR ASSY., Crankshaft idler 1

12 1 LW-10299* SHAFT, Crankshaft idler 1

13 LW´•12911* GEAR ASSY Crankshaft idler 1 1

14 1 LW-10299* SHAFT, Crankshaft idler 1 1

15 1 LW-10286 GEAR ASSY., Crankshaft idler 1 1

16 LW-10298* SHAFT, Crankshaft idler 1 1

17 76121 SHAFT ASSY., Tachometer 1

18 LW-18667 PIN, 3/16 dia. x 2-21/64 1

19 Sip-2231 I RING, Internal 1

20 1 LW-13796 SHAFT, Crankshaft idler 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 221 LW31n0.8B BOLT, 5116´•18 x 718 lone. hex. hd. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 322 1 STDP~68 NUT, 5/16-18 NC-3 slotted shear 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 123 113S19646 GEAR, Crankshaft 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 124 1 13S19649 Crankshaft 1 1

25 LW-1 8639 LOCKPLATE, Crankshaft 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 126 LW´•10332 LOCKPLATE, Crankshaft 1 1

27 1 STD´•2213 SCREW, 5/16´•24 x 1.00 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1128 1 AN8-14A BOLT, 1/2´•20 x 1-19/32 hex. hd. 1 1

29 LW-1 8840 CAMSHAFT ASSEMBLY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1LW-1 8843 CAMSHAFT ASSEMBLY 1 1 1 1LW-15445 e CAMSHAFT ASSEMBLY 1

30 76118 SPACER, Tachometer shaft 1

Used when engine employs a front end (crankcase) propeller governor drive or employs no propeller governor drive."AC" fuel pump drive (dual magneto).Propeller governor drive at front end (crankcase).Used on engines employing hyperbolic tappets.


L i i~I3 Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOG

WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

29

k.

j B

o

´•c~

i EO

9

C J/i

XI‘ I

~iuul

v n

j,$~~1

413

,6

2 4

Figure 5. CRANKSHAFT IDLER GEARS, TACHOMETER DRIVE AND CAMSHAFT

1-10

Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALUGWIDE CYLINDER FLANGE CRAMMCAS~ MBDEL ENGINES

Williamspsrt PlantCRANKCASE, CRANI<SHAFT AND CAMSHBFT GROUP

CHANKCASE ATTACHING PARTS

QLIIAN1"I~TY PEW ASSIEMBLY

FIG. 3u 10´•360

REF. PART A nA

a

6 NUMBER DESCRIPTCON LIAIA 1 B A A 1 A A B 13 B B B t3 2 8 A A B


1 LW-25-1.50 BOLT, 114-20 x 1-112 ,hex, hd. 8 8 8 8 8 8 8 8 8 8 8

LW-25-1.50* BOLT, 1/4-20 x 1-112 hex, hd. 5

LW-25-1.50* x BOLT, 1/4-20 x 1-1/2 ,hex. hd. 5 5 5 5 515

LW´•25-1.50* BOLT, 1/4-20 x 1-112 hex. hd. 6

2 LW-25-2,00* BOLT, 114-20 x 2.00 hex. hd. 2 2 2 2 2 2

LW´•25´•2.00* BOLT. 114´•20 x 2.00 hex. hd. 2

3 LW-25-1.75" BOLT, 114´•20 x 1-3/4 hex. hd. 2

4 LW-1e)572* BOLT, 1/4-20, Crankcase attachi 1

5 STD-8 WASHER, 1/4 19119119119119119 19119119 19 19

STD-H WASHER, 114 13 13113113113113

6 60803 STRAP, 1 1 1 1 1 1 1 1 1 1 1 1

60604** STRAP, 2 2 2 2 2 2

7 LW-25-1.75 BOLT, 1/4-20 x 1-314 hex. hd. 1 1 1 1 1 1 1 1 1 1 1 1

LW-25-1.75 BOLT, 1/4-20 x 1-3/4 ,hex, hd. 2 2 2 212 2

8 LW-25-1.13 BOLT, 1/4-20 x 1-118 ,hex, hd. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

9 STD-1BO WASHER, 1/4 lock, internal teeth 12112112112112112 12112112112112112112112112112

10 S~D´•1411 NUT, 1/4´•20 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

11 I LW-25S1.50 BOLT, 114´•20 x 1-112 hex. hd.,dr. end 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

12 ISTDB WASHER, 1/4 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

13 ISTD-1409 NUT, 1/4´•20 slotted sheer 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

14 STD-33 WASHER, 3/8 3 3 3 3 3 3 3 3 3 3 3 3 3 313 3

15 IAN960-616L WASHER, 3/8 ARIAR ARIARIARIAR AR

16 ISTD´•872 NUT, 3/8-24 slotted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

17 IAN6-34A BOLT, 3/8-24 x 3-37/64 long, hex. hd. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

AN6-34A* BOLT, 3/8-24 x 3-37/64 hex. hd. 1

18 1 LW-10573 BOLT, 3/8-24, Crankcase 1

19 LW´•10574* SPACER, Crankcase bolt 1

20 1 LW-11866´• SPACER NUT, 1

21 ISTD-33 WASHER, 3/8 n 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

STD-33´• WASHER, 3/8 5

STD-33* WASHER, 318 4

22 ISTD´•678 WASHER, 3/8 lock, internalteeth 2 2 2 2 2 2 2 2 2 2 2 2 2 212 2

STD-678 e WASHER, 3/8 lock, internal teeth 1

23 ISTD-596 NUT, 3/8-24 2 2 2 2 2 2 2 2 2 2 2 2 2 212 2

STD´•596´• NUT, 318-24 1

24 76220 STUD, 1/2-20 x 10-11/16 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

Special crankcase bolts for attaching rotor system (McCulloch installation).To attach fuel manifold brackets.

Fuel manifold mounted on top of the engine.Engines employing optional freon compressor (not sold by Textron Lycoming).

1-11

L i~ i~l Lycoming 10, AIO´•360-A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL EF(G~NES

Williamsport Plant

1,5,9;10---n, ~-6,7,5,9,101,5,9;10

14,15;16

17,21,22,23~ ((1 j ~24

8.5,9-~ 1,5,9,10---Y L-1--1---11~12113

1,5,9,10 2,5.9.10

6.7.5,9,107.5.9;10

1,5,9,1014;15,16

17.21.22.23-(_ 111 1 24

8,5.9--~ 1.5,9.10---Y L-L-L---11~12.13

2.3,5,9,10-h ~6.7.5.9.101,4.5.9,1

~--1.5.9.1014,15;16

17,18.19,21,22,23

24

17,20,21,22,23

8,5,9 1,5,9.10---Y L-Ll---11,12,13

Figure 6. CRANKCASE ATTACHING PARTS

1-12

Lycoming 10, AIOJGO´•A, -B SEAIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport PlantCRANKCASE, CRANKSHAFT AND CAMSHAFT GROUP

CRANKCASE ATTACHING PARTS (AIO FRONT MOUNTED PROP. GOVERNOR)


FIG. N 10´•360 AIO-360A AREF. PART A

B6A NUMBER DESCRIPTION LIA All B A A 1 A A B B B B B B 2 B A A B

LllB611D22611112F4111ABGDCDGABDBDEFFGAABB

1 LW-25-1.50 BOLT, 1/4-20 x 1-1/2 hex. hd. 8 5 55

2 STD-8 WASHER, 114 151151153 60803 STRAP, Lifti 1 1 1 1

4 LW-25-1.75 BOLT, 1/4-20 x 1´•314 hex, hd. 1 1 1 1

5 LW-25-1.13 BOLT, 1/4-20 x 1-118 ,hex, hd. 4 4 4 4

6 LW-25S2.97 BOLT, 114-20 x 2-31132 hex. hd. 1 1 1

7 STD´•160 WASHER, 114 lock, internal teeth 12 111111118 STD-141I NUT, 114-20 9 6 6 6

9 LW-25S1.50 BOLT, 1/4-20 x 1-1/2 hex, hd.,dr. end 3

10 LW-25S1.80 BOLT, 1/4-20 x 1-13/16 hex, hd.,dr. end 3 3 3

11 ISTD8 WASHER, 114 9 8 8 8

12 1STD-1409 NUT, 1/4-20 slotted shear 3 5 5 5

13 ISfD-33 WASHER, 318 3 3 3 3

14 IAN960´•616L WASHER, 3/8 max. AR

15 ISTD´•872 NUT, 3/8-24 slotted 1 1 1 1

16 AN6-34A BOLT, 3/8-24 x 3-37/64 long, hex, hd. 1 1 1 1

17 ISTD-33 WASHER, 3/8 2 3 3 318 ISTD-678 WASHER, 3/8 lock, internalteeth 2 2 2 219 ISTD-596 NUT, 318-24 2 2 2 2

20 176220 STUD, 112-20 x 10-11116 4 4 4 4

1-13

Lycoming Iq AIO-360-A, -B SERIES PARTS CATAU)GWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

r3,4,2,7,8 ~--1,2,7,8

5,2,713,14,15

I IO-360-A106 IIO-360A1D6

17.18,19--\ /1 jO

20

16,17.18,1

5.2.7 __iv 1,2,7,8 9,11,12

1,2.7,8--~ ~-3.4,2,7,8 ~6,2.7

13.14,15

5.2,7

17,18,19~ h lo\ I I lo

20

16,17,18.1

5.2.7~ 1.2.7,8-y

Figure 6A. CRANKCASE ATTACHING PARTS (AIO FRONT MOUNTED PROP. GOVERNOR)

1-14

10, AIO-360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

ACCESSORY HOUSING AND RELATED PARTS

ACCESSORY HOUSING ASSEMBLY

QUANTITY PER ASSEMBLYFIG. N 10-360 AIO´•360

A AREF. PART AB

7 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B 0 2 B A A BL11B611D22611112F4111

A86DCDGABDBDEFFGAABB

1 73818 GASKET, 1

2 21A21533-04 HOUSING ASSY., 1 1 1 1 1 1 1 1

21A21533-06 HOUSING ASSY., 1 1 1 1 1

21A21534-07 HOUSING ASSY., 1



21A21533-05 HOUSING ASSY., 1 1 1 1


21B21601-01* HOUSING ASSY., 1

21B21601-02 Sr HOUSING ASSY., 1 1


21A21534-091 HOUSING ASSY., i



3 25C-10 STUD, 1/4-20 x 1-1/4 4

4 25C-11 STUD, 1/4-20 x 1-3/8 1

5 25C-12** STUD, 1/4-20 x 1-1/2 4

25C-12+ STUD, 114-20 x 1-1/2 4 4

6 25C-20* STUD, 114-20 x 2-112 4

7 25C´•22 STUD, 1/4-20 x 2-3/4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

8 31C-12, STUD, 5116-18 x 1-112 4

31C-12~ STUD, 5/16-18 x 1-1/2 4 4 4 4

31C-12# STUD, 5/16-18 x 1-112 4

9 31C-12 STUD, 5/16-18 x 1-1/2 6 6 6 6 6 6 6 6 6 6 6 6 6 6

10 131C-12 STUD, 5116-18 x 1-1/2 8

11 131C-13 STUD, 5/16-18 x 1-518 2 2 2 2 2 2 2

12 131C-15** STUD, 5116-18 x 1´•7/8 4

13 131C´•1 STUD, 5/16-18 x 2.00 2

14 1 316-17Sr STUD, 5/16-18 x 2-1/8 4 4

15 1 31C-19 STUD, 5/16-18 x 2-3/8 2 2 2 2 2 2 2 2 2

16 1 31C-19 STUD, 5/16-18 x 2-3/8 4

31C-191 STUD, 5/16-18 x 2-3/8 4

31C-19, STUD, 5/16-18 x 2-3/8 4

31C-19~ STUD, 5116-18 x 2-3/8 4 4 4 4

17 131CD-17 STUD, 5/16-18 x 2-1/8 drilled 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 318 I LW-12589 INSERT, Helicoil, 5/8-18 x 3/8 1 1

19 lMS124703 INSERT, Helicoil, 3/4´•16 x 1-1/8 1 1

20 LW´•10341 INSERT, Helicoil, 1.00´•14 x 3/8 1 1

21 175888 STUD, 1/4-20 x 1-114 6

22 1 1102 PLUG, 1/8´•27 NPT, Alien 2

1102 PLUG, 118-27 NPT, Alien 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

1102 PLUG, 1/8-27 NPT, Alien 4

23 STD´•784 PLUG, 318 Alien 1 1 1 i 1 1 1 1 1 1 1 1 1 1 124 11102~ PLUG, 1/8-27 NPT, Alien 1 1

Revised December, 1996 2-1

L 10, AIOJGO´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

This accessory housing uses shorter studs (PIN 250-29) at vacuum pump pad."AN" governor.Woodward governor.This accessory housing uses shorter studs (PIN 250-10) at vacuum pump pad.This accessory housing uses one PIN 25C´•11 stud at vacuum pump pad.Driven height of fuel pump studs is longer to accommodate a PIN LW-10799 insulating spacer between the fuel pump and housing.

Longer studs (PIN 310-19) used on magneto pad to accommodate two S4LN-1227 impulse magnetos.

Longer studs (PIN 310-19) used on magneto pad to accommodate two S4LN-21 impulse magnetos.

Longer studs (PIN 31C´•16) used on magneto pad to accommodate magneto absorption drive.

a Assemble in accessory housing on top of oil filter pad.

21A21533-06 21A21533-10

17 7 /-1

3,6,717

22~ 4, 7

x

j

W10, O

-i15;16 22/io

2222

9~10,7: 9 ~1 i

13~16‘YIJ\,/

1

1

~--3R o

22-’11

218.930

5 \t

c 8

11I\

21B31601-01’II

21B21601-02

12,14

to ’2

Figure 7.ACCESSORY HOUSING ASSEMBLY

2-2 Revised December, 1996

L i Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


PROPELLER GOVERNOR DRIVES, ADAPTER ASSEMBLY AND COVERS


FIG. N 10-360 AIO-360

REF. PART A AA

B



1 68317 SHAFTGEAR, ler drive 1 1 1 1 1 1 1 1 1

2 LW-12914~ GEAR ASSY., driven 1 1

3 71596 WASHER, driven 1 1 1 1 1 1 1 1 iii

4 STD-1221 RING. 13116 die. x 1/32 thick 1 1 1 1 1 1 1 1 1

5 77875 GEAR, driven 1 1 1 1

6 LW-1 4021 SHAFT, idler 1 1 1 1

7 77874 GEAR ASSY., idler 1 1 11

8 77872 BUSHING, .idler 2 212 2

9 STD´•19 DOWEL, 3132 dia, x 7132 1 1 1 1

10 STD´•798 DOWEL, 3132 dia, x 9132 1 1 1 1

11 73249 WASHER, Thrust AR AR

73250 WASHER, Thrust AR



12 1 AN565B1032H5 SET SCREW, No. 10-32 x 5116 1 1 11

13 70455 GASKET, 25132 I.D. x 1-1/8 O.D, x 1/16

thick 1 1 1 1

14 LW´•13896 PLUG, 3/4-16 hex. hd. 1 1 1 1

15 68315 GASKET, drive 1 1 1 1 1 1 1 1 1

16 175153* ADAPTER ASSY., .drive 1 1 1 1 i 1 1 11

75545* ADAPTER ASSY., .drive 1 1 i 1 1 1 1

78594$r ADAPTER ASSY., .drive 1 11

17 1102 PLUG, 118-27 NPT, Alien 1 1 1 1 1 1 1 1 1

18 31C-16* STUD, 5116-18 x 2.00 4 4 4 4 4 4 4 4 4

31C-14** STUD, 5/16-18 x 1-3/4 4 4 4 4 4 4 4

19 STD´•1 164 INSERT, 5/16-18 x 5/8 Helicoil 4 4 4

20 STD´•1724 PIN, 1/8 die. x 1/4 1 1 1 1 1 1 1 1 1

21 ISTD-35 WASHER, 5116 4 4 4 4 4 4 4 4 4

22 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4 4

23 ISTD-1410 NUT, 5/16 4 4 4 4 4 4 4 4 4

24 69551 GASKET drive 1 1 1 111

25 69106 COVER, Governor drive 1 1 1 1 11

26 ISTD-35 WASHER, 5/16 4 4 4 4 44

27 ISTD-475 WASHER, 5116 lock, internalteeth 4 4 4 4 4 4

28 ISTD´•1410 NUT, 5116-18 4 4 4 4 4 4

29 172053 GASKET, Governor 1 1 1 1 1 1 1 1 1 1 1 1 1

72053 e GASKET, Governor 2 2

72053~ GASKET, Governor 2

30 72378 COVER, Governor drive 1 1 1 1 1 1 1 1 1 1 1 11

72378 COVER, Governor drive 1 1

COVER, Governor drive 2

31 1 LW-12347 PLATE, 1 1

32 STD-35 WASHER, 5/16 32 32132 32 32132132 32

STD-35 WASHER, 5/16 4 4 4 4 4 4 4 4 4 4 4 4 4 44

WASHER, 5/16 6

33 ISTD-475 WASH 5116 lock, internalteeth 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

STD-475~ WASHER, 5/16 lock, internal teeth 8

2-3

I Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant ACCESSORY HOUSING AND RELATED PARTS

PROPELLER GOVERNOR DRIVES, ADAPTER ASSEMBLY AND COVERS (Continued)


FIG. N 10-360 AIO-360


8 NUMBER DESCRIPTION L(AIAI1 B A A 1 A A B B B B B B 2 B A A B


34 LW-31-1,69$ BOLT, 5/16-18 x 1-11116 hex. hd. 4

35 ISTD-1410 NUT, 5/16-18 n 4 4 4 4 4 4 4 4 4 4 4 4 4 44

STD-141 NUT, 5116-18 n 4

36 LW-31H1.22* BOLT, 5116-18 x 1-7/32 4 4 4

Woodward governor,L’AN" governor,

"AN’: governor; cap screws instead of studs.

Dual magneto. 230

29

aPropeller governor drive cover for dual drive pad. 1

iIBo j33 o

I 4,

jjc’:

c~/J’

i.L

8b 1

~e 1

934

IG*’.

c\ \rr/

-i:

31::Ci6i~-M

na

I ’U

18

~---130

~--333

15

c ~oaa ´•i23

16

22

a, 27 ~--25 ’-24

Figure 8. PROPELLER GOVERNOR DRIVES, ADAPTER ASSEMBLY AND COVERS

2-4

1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport PlantACCESSORY HOUSING AND RELATED PARTS

PROPELLER GOVERNOR OIL LINES


FIG. N 10´•360 AIO´•360



ABGDCDGABDBDEFFGAABB

1 75166* TUBE ASSY., oil line 1

75166* TUBE ASSY., oil line 1

751671r TUBE ASSY., oil line 1 1 1 1 1 1 1 1 1

75167~ TUBE ASSY., oil line 1 1 1 1

TUBE ASSY., Oil line 1 1

757301 TUBE ASSY., oil line 1 1

LW-10494+ TUBE ASSY., oil line 1 1 1

LW´•12920, TUBE ASSY., oil line 1 1

2 STD-1 930 HOSE, 318 I.D. x1.00 1 1 1 1 1 1 1 1 1 1 1 1

3 751 65 CLIP, Oil line 1 1 1 1 1 1 1 1 1 1 1 1

4 STD-35 WASHER, 5116 3 3 3 3 3 3 3 3 3 3 3

5 STD-475 WASHER, 5/16 lock, internal teeth 1 1 1 1 1 1 1 1 1 1 1

6 LW-31´•0.94 BOLT, 5116´•18 x15116 hex. hd. 1 1 1 1 1 1 1 1 1 1 1

7 LW-J 6266-25-38 CLAMP 1 1 1 1 1 1 1 1 1 1 1 1

8 MS20822-6 ELBOW, 3/8 flared tube 1/4 NPT, 900 1 1 1 1 1 1 1 1 1 1 1 1

9 74070 ELBOW, 3/8 flared tube 6 9/16´•18 str.

thd., 450 1 1 1 1 1 1 1 1 1 1 1 1

10 75739 NIPPLE, 3/8 flared tube 6 9116-18 str.

thd. 1

11 IAN814´•6LI PLUG, Governor oil line 1

12 1 MS29512-6~ SEAL, Oil, 5164 dia, sect, x 15/32 I.D. 1

13 STD-783~ PLUG, 1/4-18 NPT, Alien head 1 1 1 1 11

Used with PIN 75739 straight nipple at governor adapter set-up used with alternator.

Used with PIN 75739 straight nipple at governor adapter set-up used with generator.Used with PIN 74070 (450) elbow at governor adapter set-up used with alternator.

Used with PIN 74070 (450) elbow at governor adapter set-up used with generator.Used with PIN 74070 (450) elbow at governor adapter set-up used with alternator for Mooney.

I Used with PIN 74070 (450) elbow at governor adapter set-up used with generator for Mooney.Dual magneto.No propeller governor oil line installed.

2-5

L Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATAU)GWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

Cc~l

ii´•;h:~1

´•2

i Yo’

(D

Figure 9. PROPELLER GOVERNOR OIL LINES

2-6

Lycaming 1O, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Piant ACCESSORY HOUSING AND RELATED PARTS

O1L SCAVENGE PUMP AND OIL SUCTION TUBES (AIO-360)

QUANTITY PER ASSEMBLYFIG. 61 10´•360 AIO-360

REF. PART A AA Al B

10 NUMBER DESCRIPTION L(AIA 1 B A A 1 A A 8 B B 8 B B 2 B A A B


1 68315 GASKET, drive 1 1 1

2 77172 PUMP ASSY., Oil 1 1 1

3 77125 ADAPTER ASSY., Oil scav. 1 1 1

4 77118 SHAFT, Oil idler 222

5 STD-2013 RING, Oil seal, 39/64 I.D, x 1/16

section 2 2 2

6 AN381-4-22 PIN, Cotter, 118 die. x 1-318 2 2 2

7 STD-1173 INSERT, 1/4-20 Helicoil x 1/2 2 2 2

8 66145 DOWEL. 1/4 die. x 1/2 2 2 2

9 77116 SHAFT ASSY., drive 1 11

10 66426 IMPELLER, Oil scav. ,drivi 111

11 168403 IMPELLER, Oil scav. driven 222

12 77124 HOUSING ASSY., Oil scav. 1 11

13 1 STD-1173 INSERT, 114´•20 Helicoil x 112 6 66

14 1 STD-1353 INSERT, No. 10-24 Helicoil x 3/8

444

15 ISTD8 WASHER. 1/4 n 888

16 ISTD-iBO WASHER, 114 lock, internal teeth 888

17 ILW-25´•0.94 BOLT, 1/4-20 x 15/16 hex. hd. 6 66

18 ILW-25-2.94 BOLT, 1/4-20 x 2-15/16 hex. hd. 2 22

19 ISTD-35 WASHER, 5116 444

20 ISTD-475 WASHER, 5116 lack, internalteeth 4 4 4

21 ISTD-1410 NUT, 5/16-18 444

22 77155 FITTI 5/8 ,900 2 2 2

23 77131 TUBE ASSY., Oil scav., cover 1 1 1

24 77128 TUBE ASSY., Oil scav., 1 1 1

25 77115 TUBE ASSY., Oil scav., lower cover i 1 1

26 77130 TUBE ASSY., Oil scav., lower 1 11

27 1 LW-1 6266-25-63 CLAMP 111

28 STD´•1576 HOSE, 5/8 I.D. x 31/32 O.D, x 2-112

222

29 LW´•15592-8-08 CLAMP, Hose, 15/16 I.D. x 1/2 wide 4 4 4

2-7

ri Lycoming LO, AIO´•360d, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

11--\ ~a%lv Id

128=

o

7

2

23

22

8

102

14

28\>c\/ 2

29

24 "-28

Figure 10. OIL SCAVENGE PUMP AND OIL SUCTION TUBES (A10360)

2-8

LlrCCrCT.J~ Lycoming 10, AIOdBO´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


OIL FILTER ASSEMBLY


FIG. N 10-360 AIO-360REF. PART A

B

A A

11 NUMBER DESCRIPTION LIAJA 1 B A A 1 A A B B B B B B 2 BIA A BL11B611D22611112F41111

ABGDCDGABDBDEFFGAABB1 62817* SCREEN ASSY., Oil pressure I II 1 II II 1 1 1 1 1 1 1 1 1 1 1 1 12 61173* GASKET, Oil pressure housina I II 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 13 69510* 1 HOUSING, Thermostatic valve oil

screen I II 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 14 68974* HOUSING, Oil pressure screen I I I I I I I I I I I j I I I I II5 06E 19769-0.63* GASKET, 7/8 O.D, x 5/8 I.D, x 3/32

annular I II 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 16 STD´•8* WASHER, 1/4 plain 1 14 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 47 STD´•160* WASHER, 114 lock, internal teeth I I 1 141 1 I I I I I I I 1 148 LW-25-0.75* BOLT, 114-20 x 3/4 long, hex. hd. I I 1 141 1 I I I I I I I I 1 )49 STD-1856* I SCREW, 1/4-20 x1.00 long, hex. hd. 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 410 53E19600* VALVE ASSY., Temp. control oil cooler

111 11 11 111111111111 76510* 1 GASKET, Valve assembly II 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 112 1 LW-12795 2r GASKET, Oil filter adapter 1 12 2 21 1 1 12 2 2 2 2 2 213 1 LW-14089 KIT, Oil filter element 1 1 II I 1 111 1 I II 1 1 II I II14 1 778521r OIL FILTER BASE ASSEMBLY 1 i II I 1 111 1 I II 1 1 1 1

77852 a OIL FILTER BASE ASSEMBLY 1 1 II I I 1 111 1 I II 1 1 115 1 54D19625 a OIL FILTER, Textron (short-with studl I 1 1 i I I I I I I 1 I I I I 1 1 1 116 1 STD8 2r WASHER, 114 plain 1 (4 4 41 1 1 14 4 4 4 4 41 1 1417 ISTD´•160+ WASHER, 1/4 lock, internal teeth 1 III I I II 1 1 1 1 II I 1118 1 STD-141I NUT, 1/4-20 plain I II 1 II I I II 1 1 1 1 II I II19 STD-1856 It SCREW, 114-20 x 1.00 long, hex, hd. 3 3 31 1 1 13 3 3 3 3 3 320 1 53E19600 VALVE ASSY., Temp. control oil cooler

1 1 II I I II 1 1 1 1 1 121 176510* GASKET, Valve assembly I II 1 II I I II 1 1 1 1 1 122 125C´•10* STUD, 114-20 x 1-1/4 long I II 1 II I I II 1 1 1 1 1 1

231 55C21021$ SPRING, Oil-filter bypass valve I I 1 111 1 I I I Ii24 176539t. 1 SEAT, Oil relief valve I I 1 111 1 I I I )125 LW-10320$ SLEEVE, Oil filter bypass valve I I I 1 111 I I I II26 1 MS16625-1100~ RING, Internal retaining I I I 111 1 I I II27 LW´•13904$ I KIT, Converter plate, oil filter I I I 1 111 1 I I I ri28 1 54Di 9627$ 1 OILFILTER, Textron, (short´• nostud) I I I I I 1 I I I I I I 1

29 153E19600$ VALVE ASSY., Temp. control oil cooler

II I I I I II30 176510$ GASKET, Valve assembly I I 1 111 1 I I I II

Oil pressure screen housing assembly incorporating a thermostatic valve.Oil pressure screen housing assembly without thermostatic valve.Oil filter housing assembly (canister type). P/N 77853 oil filter housing (shown by offset view) will no longer be sold by TextronLycoming.Throw away oil filter.

Dual magneto.

NOTE

See latest edition of Textron Lycoming SSP-885 for oil filter kits and replacement filters.

ORIIGINAL

2-9 As IWeceived ByATIP

eycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

WilliamsporP Plant

4 2

\j:´•,I

;mF\‘r;

22

3

i-;1a

i

11 14

c

v\

1 6,1

\\\jjO\ iC~7\"7 3iy I

1 616

8 6/_

15

-´•i-~d

;19

13-7 1 21

2 .1?’r:./r

Gf:rtc:4 j.lFilter No Longer Sold \I .PCanister Type Oil

x

I

il---iBy Textron Lycoming.

24 t~p 3‘´•

2

2

3027

4 ’--ZLI 2

Figure 11. OIL FILTER ASSEMBLY

2-10

Lij:Cli~Lycoming 1O, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


OIL COOLER AND BREATHER FITTINGS

QUANTITY PER ASSEMBLYFIQ. N 10-360 AIO-360

REF. PART A AA A, B



1 69436 SPRING, Oil cooler 1

2 62415 PLUNGER, Oil cooler 1

3 06E19769-0.63 GASKET, 7/8 O.D. x 5/8 I.D. x 3132

annular 1 i i 1

4 62417 PLUG, Oil cooler 1 1 1 1

5 STD´•784 PLUG, 3/8´•18 NPT, Alien 2 2 22

6 71140* FITTING, Breather 1

7 06E19769´•0.63 GASKET, 7/8 O.D. x 5/8 I.D. x 3132

annular 1 1 1 1 1 1 1 1 1 1 i 1 1 1 1

8 62417** PLUG, Oil cooler 1 1 1 1 1 1 1 1

9 69675 CONNECTOR, Ace. to oil cooler

inlet hose 1 1 1 1 1 1 1 1 1 1 1 1 1

10 1 71600 a ADAPTER, Oil cooler connection 1 1

11 STD-784** PLUG, 3/8 ,Allen 2 2 2 2 2 1 2 2

STD-784 PLUG, 3/8 Alien 2 2 2 2 2 2 2 2 2 2 2 22

STD-784 a PLUG, 3/8 Alien 2 2

12 71140** FITTING, Breather 1 1 1 1 1 1

71140* FITTING, Breather 1 1 1 1 1 1 1 1 1 1 1 1 1

71140´• FITTING, Breather 1 1

13 1 72413$ FITTING, Breather, 1200 1 1

14 MS20823-81 ELBOW, 112 flared tube, 3/8 thd. 1

15 AN844´•10D, ELBOW, 518 I.D. hose, thd., 450 1

16 IAN932´•5~ PLUG, 1/2 ,Allen hd. 1 1 1

17 1 71623 WASHER, Oil cooler 1 1 1 1 1 1 1 1

18 AN777-8D ELBOW, Universal, 750 1 1 1 1 1 1 1 1

19 AN901-8A GASKET, Metal tube connection seal 1 1 1 1 1 1 1 1

20 71 620 BOLT, Oil cooler 1 1 1 1 1 1 1 1

21 ISTD´•784 PLUG, 3/8 Alien 2 2 2 2 2 2 2 2

22 172413 FITTING, Breather, 1200 elbow 1 1 1 1 1 1 1 1

71140 FITTING, Breather 1

23 IAN844-10D ELBOW, 5/8 I.D. hose, thd., 450 1 1

24 MS29512-10 SEAL, Oil, 3/32 section x 45164 I.D. 1 1

25 IAN814´•10L PLUG, Turbo drain back 1 1

26 106E19769´•0.63$$ GASKET, 7/8 O.D, x 5/8 I.D, x 3132

annular 2 2

27 1 PLUG, Thermometer well 2 2

28 IMS29512-10 SEAL, Oil, 3/32 section x 45/64 I.D. 2 2

29 1 LW-12903 REDUCER, 3/8 tube to 5/8 tube 2

AN919-15 REDUCER, 1/2 tube to 5/8 tube 2 2

Oil cooler bypass spring and plunger with breather fitting.Used in place of oil cooler outlet fitting.3/8 flared tube connection to oil cooler.

a 318 pipe tap connection to oil cooler.

1200 elbow used with PIN 69675 (3/8) flared tube connector.

I Assemble in lower oil cooler boss.

Assemble in accessory housing breather boss.

Assemble in accessory housing breather hole.

Assemble at oil temperature and oil pressure bosses.

2-11

I Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE,e

Wllliamsport Plant

4,8i~´•1

10792

871

\--3 .76,12

cJii13Ii

a -i ~i:i ’i

2

j

a

~2,, ~,11.21´•G

p-:I;

i29

28

"3i~ j ij iIii~-u

n,v´•i .;L~,S/724

Figure 12. OIL COOLER AND BREATHER FITTINGS

2-12

LIJ~CI ~1:I Lycoming 10, AIO´•360´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


OIL PUMP ASSEMBLY AND ACCESSORY HOUSING ATTACHING PARTS


FIG. N 10´•360 AIO´•360


13 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A BLllB611D22611112F4111


1 78528* BODY ASSY., Oil 1

2 STD-1339 PLUG, 1/16-27 NPT, Alien hd. 1

3 78531** BODY, Oil 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4 LW´•1 03421t BODY, Oil 1 1

5 LW´•18110~ IMPELLER ASSY., Oil driven 1

6 LW-1 4040 GEAR ASSY., Oil drive 1 1

7 61166+ THRUST BUTTON 1 1

8 61174 SHAFT, Oil drive 1 i 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9 LW-18109~ IM Oil 1

10 ISTD´•35 WASHER, 5/16 3

11 STD-1420 NUT, 5116-18 slotted 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

12 1 LW-31H1.75+ BOLT, 5/16-18 x 113/4 3 3

13 LW-14260 SEAL, Tachometer drive, oil 1

14 ISTD8 WASHER, 1/4 12

15 1 STD-160 WASHER, 1/4 lock, internal teeth 12

16 ILW-25´•0.94 BOLT, 1/4-20 x 15116 hex. hd. 1 10110 10110110110110 10110110110110110110110110110

LW-25-0.94+ BOLT, 1/4-20 x 15/16 hex. hd. 9 9

17 1 LW´•25-1.50 BOLT, 1/4-20 x 1-1/2 hex. hd. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

18 1 LW-25-1.25 BOLT, 1/4-20 x 1´•1/4 hex. hd. 1 1

19 LW-25-0.81+ BOLT, 1/4-20´•x 13/16 hex. hd. 2 2

"AN" fuel pump drive.

"AC" fuel pump drive.

"AN" or "AC" fuel pump orive, dual magneto.a Refer to the latest edition of Textron Lycoming Service Bulletin No. 455 for kit availability.

2-13

L i ~C i ~:I Lycoming 10, AIO´•360A, ´•B SERIES PARTS CATALOG


Williamsport Plant

14,1 5,16

-Cc:

J~ii/e

ij j~1 4,1 5,17

c 14,15,16

ic1,iI

i\L

4,1 5,16

jcL;

’I:ii /V

i~l:::-c/´•,

i 1

14;15.1 4

14;15,18.Ja

14,15,1610

12

Figure 13. OIL PUMP ASSEMBLY AND ACCESSORY HOUSING ATTACHING PARTS

2-14

10, AIO-360-A, -B SERIES PARTS CATALOeiWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsporl PlantACCESSORY HOUSING AND RELATED PARTS

VACUUM PUMP DRIVES AND COVERS


FIG. N 10´•360 AIO´•360




1 61183 GASKET, 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 61098 ADAPTER ASSY., Vacuum 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

3 STD´•1774 PIN, 118 dia, x 1/4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4 STD-2217 OIL SEAL, 7/8 I.D, x 1-1/2 O.D. x

5/16 wide 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5 72970 GEAR ASSY., Vacuum driven 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6 LW-10305 GEAR ASSY., driven 1 1

7 61166 THRUST BUTTON 1 1

8 71596 WASHER, driven 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9 STD´•2217 OIL SEAL, 7/8 I.D. x 1-1/2 O.D, x 5/16

wide 1 1

10 8313 GASKET, Vacuum 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

11 61183* GASKET, 1 1 1 1 1 1 1 1 1 1 1 1 1

12 160430 COVER,Vacuum 1

13 68593** SPACER, Vacuum stud 4 4 4 4 4 4 4 4 4 4 4 4 4

14 ISTD-8 WASHER, 1/4 4

15 ISTD-160 WASHER, 1/4 lock, internal teeth 4

16 STD-1411 NUT, 1/4-20 4

This gasket is fashioned to fit between PIN 61098 adapter assy. and accessory housing.Required when no vacuum pump is used.

2-15

L i ~:C i ~;I Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

/j’j:i

´•16-- ;-ic1 i~ ~jjjjI

OG12

j d.6II

~a

2

1,11 6

4

i :c~OI12

‘C

o1

o

Figure 14. VACUUM PUMP DRIVES AND COVERS

2-16

1O, AIO´•360´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


VACUUM PUMP AND PROPELLER GOVERNOR (DUAL DRIVE)

QUAN"TITY PER ASSEMBLY

FIG. N 10-360 AIO-360

REF. PART A AA B



1 61183 GASKET, 1

2 70348 DUAL DRIVE ASSY., Vacuum 8

3 69725 ADAPTER ASSY., Dual access. drive 1

4 25C-12 STUD, 1/4´•20 x 1-1/2 1

5 25(=´•29 STUD, 1/4-20 x 3-5/8 3

6 66145 DOWEL, 1/4 dia, x 1/2 2

7 69319 GEAR ASSY., drive 1

8 61166 THRUST BUTTON, Vacuum

9 71 596 WASHER, driven 1

10 69316 GEAR, Dual drive 1

11 69730 GEAR ASSY., idler 1

12 69731 BUSHING, idler 1

13 71 596 WASHER, driven 2

14 ISTD-2072 "O" RING, Static seal 1

15 73231 GEAR ASSY., Vacuum driven 1

16 69720 GASKET, Dual drive

cover 1

17 69719 COVER ASSY., Vacuum

18 1 STD-2217 SEAL, 718 l.D. x 1-1/2 O.D. x 5/16

wide 1

19 125C-12 STUD, 1/4-20 x 1-1/2 1

20 125(=´•16 STUD, 1/4-20 x 2.00 1

21 169318 SHAFT, idler 1

22 ISTD-938 DOWEL, 3/32 dia, x 11132 1

23 1 STD´•I 339 PLUG, 1116´•27 Alien 1

24 1102 PLUG, 1/8´•27 ,Allen 1

25 1 STD-1774 PIN, 1/8 dia, x 1/4 1

26 STD-8 WASHER, 114 2

27 1 STD-160 WASHER, 114 lock, internal teeth 2

28 1 STD-1411 NUT, 1/4-20 n 2



31 69320 CAPSCREW, 114-20 x 2-23/32

socket hd. 3

32 STD-1411 NUT, 114-20 1

33 ISTD-696 WASHER, 17164 I.D. x 112 O.D. x 1132

thick

34 71023 BRACE, Dual drive, vac. 8

35 ISTD-160 WASHER, 114 lock, internal teeth 1

36 LW´•25-1.25 BOLT, 114´•20 x 1-114 hex. hd. 1

37 69827 GASKET, Governor 1

38 69737 SPACER, Governor 1

2-17

Li ~C i 1~:I Lycoming 14 A10980d, ´•B SERIES PARTS CATALOG


:2~

Isllu

lo

~83 \ij~37

b8

2X3so

31

j ´•i~,,I

13

21

3 o

Figure 15. VACUUM PUMP AND PROPELLER GOVERNOR (DUAL DRIVE)

2-18

Lycoming 10, AIO´•360A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODE: ENGINES


FUEL PUMP AND FUEL PUMP COVERS


FIG. N 10-360 AIO´•360



LllB611D22611112F4111A B 6 DIC D 6 A B D B D E F F 6 AIA B B

1 60096 GASKET, Fuel 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 LW-1 0799 SPACER, Fuel 1

3 LW-15473 FUEL PUMP, Dual

1 11111111111 11111111

4 78993 FUEL PUMP, 1 1

5 STD´•33 WASHER, 3/8 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 22

6 STD-35 WASHER, 5116 4

7 STD-1882 SCREW, 3/8-16 x 1-9/32 socket

hd., dr. hd. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 22

8 STD-475 WASHER, 5/16 lock, internal teeth 4

9 STD´•1410 NUT, 5/16-18 4

10 1691-C GASKET, Fuel 1

11 160431 COVER, Fuel 1

12 ISTD´•35 WASHER, 5/16 4

13 ISTD´•475 5/16 lock, internal teeth 4

14 ISTD-1410 NUT, 5/16-18 4

15 1 74070* ´•IELBOW, 318 450 1 1 1 1 1 1 1 1 1 1

LW-16562* ´•I NIPPLE, 3/8 flared tube to 9116-18 str.

thd. 1 1

16 74070** ´•IELBOW, 318 450 1

17 72377 I ELBOW, 3/8 tubing, adj. 900 1 1 1 1 1

72377~ I ELBOW, 3/8 tubing, adj. 900 2 2 2 2 2 2

18 75924 SHAFTGEAR ASSY., Fuel drive 1

19 61166 THRUST BUTTON, Fuel 1

20 69164 GASKET, Fuel 1

21 69159 ADAPTER ASSY., Fuel drive 1

22 1 STD´•1774 PIN, 118 dia. x 1/4 1

23 ISTD´•213 SEAL, Oil, 3/4 I.D. x 1´•3/8 O.D. x

5116 wide 1

Assemble in fuel pump outlet.

Assemble in fuel pump inlet (horizontal).Assemble in fuel pump inlet and outlet.

Use 1 each. P~ M529512-06 ’0" Ring ith these fittings.


L 1 ~CI Lycoming 10, AIO-360d, ´•B SERIES PARTS CATAU)(j


´•~4..i: ~I

’i\

a-

5

,"9eK.CALL- OUTS

#15,16,&17 15

REQUIRE P/N 7

Ilo RING" I\,ji;s/MS29512-06

’´°T~20

22

’-~1.´•o~ V 7 \o 10

bI 23

2 11

1213

Figure 16. FUEL PUMPS AND FUEL PUMP COVERS


Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANI(CASE MODEL ENGINES

CYLINDER, PISTON AND VALVE TRAIN

CONNECTING ROD, PISTON AND RING ASSEMBLIES

QLJANTITY PER ASSEMBLY

FIG. N 10-360 AIO-360

REF. PART A AA A, B


L11B631D22611112F4111ABGDCDGABDBDEFFGAIABB

1 LW-1 i 750-S CONNECTING ROD ASSEMBLY 4 4 4 4 4 4 4

LW-19332-S* CONNECTING ROD ASSEMBLY 4 4 4 4 4 4

77450´•S CONNECTING ROD ASSEMBLY 4 4 4 4 4 4 4

2 LW-1 3923 BUSHING, rod, 4

3 75060 BOLT, rod 8 8 8 8 8 8 8 8 8 8 8 8 8 8

75061+ BOLT, rod 8 8 8 8 8 8 8

LW-12596* BOLT, rod 8 8 8 8 8 8

4 LW-12186 NUT, rod bolt 8

5 74309* BEARING, rod 8 8 8 8 8 8

76394* BEARING, Con rod lalternate 8 8 8 8 8 8

18N19391* BEARING, Con rod lalternate 8 8 8 8 8 8

LW-13212 BEARING, Con rod 8 8 8 8 8 8 8

LW-13209 BEARING. Con rod ~alternate 8 8 8 8 8 8 8

LW-16143 BEARING, rod lalternate 8 8 8 8 8 8 8

LW-13521 BEARING, rod 8 8 8 8 8 8 8

LW-13522 BEARING, rod lalternate 8 8 8 8 8 8 8

LW-16048 BEARING, Connecti rod 8 8 8 8 8 8 8

6 75089 PISTON, ratio 8.50:1 4 4 4 4 4 4 4

LW´•10207-S PISTON, ratio 8.70:1 4 4 4 4 4 4 4 4 4 4 4 4 4

7 LW-14077"* PIN, Piston 4 4

LW´•14078 PIN, Piston 4

8 LW-11 775 PLUG, Piston 8 8

60828 PLUG, Piston 8

9 74241 RING. Piston 8

(1 10 I RING, Piston, oil regulating 14

Large journal (2.25 dia.) connecting rod.

Receives a PIN LW-11775 piloted piston pin plug (use in complete sets only).Ir Torque bolt.

Stretch, machined on both ends. (Used in some applications as an alternate to PIN 75061 bolt. See latest edition of

Textron Lycoming Service Instruction No. 1450.)

Revised October, 1995 3-1


Williamsport Plant

Figure 17. CONNECTING ROD, PISTON AND RING ASSEMBLIES

3-2

L i ~C i Lycenaing 10, AIO´•360´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant CYLINDER, PISTON AND VALVE TRAIN

CYLINDER ASSEMBLY

QUANPITY PER ASSEMBLYFIG. N 10´•360 AIO-360

A AREF. PART A Al A 3 B18 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A B


1 LW-12427 CYLINDER ANR HEAD ASSY., Nitrided 4 4 4 4 4 4 4

LW-12988* CYLINDER AND HEAD ASSY., Nitrided 4 4

LW-12993 CYLINDER AND HEAD ASSY., Nitrided 4 4 4 4 4 4 4 4 4 4 4 4 4

2 72057 SEAT, Intake valve 4 4 4 4 4 4 4

LW-12688 SEAT, Intake valve 4 4 4 4 4 4 4 4 4 4 4 4 4

3 72058 SEAT, Exhaust valve 4 4 4 4 4 4 4

16T19468 SEAT, Exhaust valve 4 4 4 4 4 4 4 4 4 4 4 4 4

4 61681 GUIDE, Valve, intake 4 4 4 4 4 4 4

66713 GU Valve, intake 4 4 4 4 4 4 4 4 4 4 4 4 4

5 74230 GU Valve, exhaust 4 4 4 4 4 4 4

72897 GUIDE, Valve, exhaust 4 4 4 4 4 4 4 4 4 4 4 4 4

75838 GUIDE, Valve, exhaust 4 4

6 66796 INSERT, 18-1.5MM 8

69260* INSERT, reach 8 8

7 STD-1872 INSERT, 1/8-27 Helicoil,thd. 8

8 31C´•12 STUD, 5/16-18 x 1-112 8

9 31C´•13* STUD, 5/16´•18 x 1-5/8 8 8

10 25C-8 STUD, 1/4-20 x 1.00 16116116116116116116116116116 16116116

11 125(=-9 STUD, 1/4-20 x 1-1/8 4 4 4 4 4 4 4

12 66670 BUSHING, Rocker shaft, inner 16116116116116116116116116116 16116116

13 IMS20823´•6D ELBOW, 3/8 flared tube, 450 4

14 66610 BUSHING, Rocker shaft 1611611 16116116116

15 72343 STABILIZER, .head fins, 15 teeth 4 4 4 4 4 4 4 4 4 4 4 4 4

16 72344 STABILIZER, head fins, 26 teeth 4 4 4 4 4 4 4 4 4 4 4 4 4

17 11102** PLUG, 1/8´•27 NPT, Alien 4

Cylinder Assembly employing long reach spark plugs.Assemble in cylinder head.

3-3

C1~C i L~:l Lycoming 10, AIO-360A, ´•B SERIES PARTS CATAU)GWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

oi~

Ibjl

..Pi

r(0

1

´•’J,,Figure 18. CYLINDER ASSEMBLY

3-4

L i ~CC iiT~ Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant CYLINDER, PISTON END VALVE TRAIN

VALVE ASSEMBLY


FIG. N 10-360 AIO-360


19 NUMBER DESCRIPTION LIAIAI1 B A A 1 A A B B B B B B 2 B A A B


1 73938 VALVE, Intake 4 4 4 4 4 4 4

LW-13622 VALVE, Intake 4 4 4 4 4 4 4 4 4 4 4 4 4

2 LW-19001 VAL Exhaust (rotator 4 4 4 4 4 4 4

LW-16740 VALVE, Exhaust (rotator 4 4 4 4 4 4 4 4 4 4 4 4 4

3 LW-11795 SPRING, Valve, inner 8 8 8 8 8 8 8

LW-11797 SPRiNG, Valve, inner 8 8 8 8 8 8 8 8 8 8 8 88

4 LW-11800 SPRING, Valve, outer 8 8 8 8 8 8 8

LW-11796 SPRING, Valve, outer 8 8 8 8 8 8 8 8 8 8 8 88

5 65441 SEAT, Valve ,lower intake 4 4 4 4 4 4 4

6 LW´•13323 SEAT, Valve lower exhaust 4 4 4 4 4 4 4

7 LW-13322 SEAT, Valve ,lower intake exh. 8 8 8 8 8 8 8 8 8 8 8 88

8 LW-10077 SEAT, Valve intake 4 4 4 4 4 4 4

69532 SEAT, Valve intake 4 4 4 4 4 4 4 4 4 4 4 44

9 LW-1 6475 SEAT, Valve exhaust

rotator 4

10 60009 KEY, Valve, intake 8 8 8 8 8 8 8

72050 KEY, Valve, intake 8 8 8 8 8 8 8 8 8 8 8 8 8

11 1 17C21191 KEY, Valve, exhaust (rotator 8

12 62388 CAP, Valve stem, intake 4 4 4 4 4 4 4 4 4 4 4 44

13 17C19386 CAP, Valve stem, exhaust 4

14 178290 PLUNGER ASSY. 8

15 178524 SOCKET, Push rod, ic 8

16 1 LW-11485 TUBE, Push rod shroud 8 8 8 8 8 8 8

17 72255 SHROUD TUBE ASSY., Push rod 8 8 8 8 8 8 8 8 8 8 8 88

18 ILW-14995 SPRING, Shroud tube 4 4 4 4 4 4 4

19 LW-13077 SPRING. Shroud tube 1611611611611 1611611611 16 16116116

20 LW-12272 LOCKPLATE, Shroud tube 4 4 4 4 4 4 4

21 ISTD´•1411 NUT, 1/4-20 n 4 4 4 4 4 4 4

22 66728 WASHER, 25/32 1.D, x 1-1/4 O.D. x.

1/32 thick

23 61503 SLEEVE, Shroud tube seal 8 8 8 8 8 8 8 8 8 8 8 88

24 70310 SEAL, Shroud tube 8 8 8 8 8 8 8

25 ILW-18661 SEAL, Shroud tube 1611611611611 1611611611 1618 8 8 B 8 8 8116116116

3-5

Lycoming 10, AIO´•360d, ´•B SERIES PARTS CATAeOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamspsrt Plant

2 24

’hx

3

16

20

r

j ’j i i 8

21m~’le r´•\ii ’~uiV

j :IIii

25

4

3

o/;22 5,

4

3

8

3i ’ii,,;,

ji

1 iiiiiAPIIJ.i I!! i Ii~Ivii~73

1

Figure 19. VALVE ASSEMBLY

3-6

Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CYLINDER RELATED PARTS

QUANTITY PER ASSEMBLYFIO. N 10´•360 AIO´•360

A AREF. PART AB

20 NUMBER DESCRIPTION L(AIA 1 B A A 1 A A B B B B B B 2 B A A BL11B611D22611112F4111


1 73434" ROD ASSY., Push IA total of 8 d. AR AR AR

15F19957-35 ROD ASSY., Push total of 8 d. AR AR

15F19957-36* ROD ASSY., Push total of 8 d.

73437* ROD ASSY., Push total of 8 d.

73455* ROD´• ASSY., Push total of 8 ’d. AR

73456* ROD ASSY., Push total of 8 ’d.

15F19957´•57* ROD ASSY., Push total of 8 ’d.

73458* ROD ASSY., Push total of 8 ’d. AR

73555* ROD ASSY., Push total of 8 ’d. AR

ROD ASSY., Push total of 8 ’d. AR

73557 ROD ASSY., Push total of 8 ’d. AR

73558+ ROD ASSY., Push total of 8 ’d. AR

2 17F19353 ROCKER ASSY., Valve, intake exh. 8 8 8 8 8 8 8

71266 ROCKER ASSY., Valve, intake 4 4 4 4 4 4 4 4 4 4 4 4 4

3 74637 BUSHING, Valve rocker, int. 8 exh. 8 8 8 8 8 8 8

67114 BUSHING, Valve rocker, intake 4 4 4 4 4 4 4 4 4 4 4 44

4 74390 ROCKER ASSY., Valve, exhaust 4 4 4 4 4 4 4 4 4 4 4 44

5 74389 BUSHING, Valve rocker, exhaust 4 4 4 4 4 4 4 4 4 4 4 4 4

6 71549 WASHER, Valve rocker, thrust 8 8 8 8 8 8 8 8 8 8 8 8 8

7 LW´•13790 SHAFT, Valve rocker 4 4 4 4 4 4 4

72626 SHAFT, Valve rocker 8 8 8 8 8 8 8 8 8 8 8 8 8

8 LW-12892 THRUST BUTTON, Rocker shaft 8 8 8 8 8 8 8

9 66732 GASKET, Valve rocker shaft cover 8 8 8 8 8 8 8 8 8 B 8 88

10 72710 Valve rocker shaft 8 8 8 8 8 8 8 8 8 8 8 8 8

11 I STD-160 WASHER, 1/4 lock, internal teeth 16116116116116116116116116116 6116116

12 1 STD-1411 NUT. 1/4-20 1611611611611 16116116116116 6116116

13 75906 GASKET, Rocker box cover 4 4 4 4 4 4 4

14 167193 GASKET, Rocker box cover 4 4 4 4 4 4 4 4 4 4 4 4 4

15 61247 COVER, Rocker box 4 4 4 4 4 4 4

16 68795 COVER ASSY., Rocker box 4 4 4 4 4 4 4 4 4 4 4 4 4

17 1 STD-1925 SCREW, 1/4-20 x 5/8 .hd. 4124124124 4124124

STD-1925 SCREW, 114-20 x 5/8 .hd. 32 32132 32132132132

18 71481 RING, Oil seal, 3/32 dia, section x

4-27/32 I.D. 4

19 74887 SP 33/64 I.D. x 7/8 O.D. x 318

thick 2

20 1383-8 NUT, 3/8-24 16

21 ISTD-2090 NUT, 112-20 18

22 74494 PLATE, reach caution 4 4

23 75118 GASKET, Exhaust 8 8 8 8 8 8 8 8 8 8 8 8 8 8

LW-19296 GASKET, Exhaust 4 4 4 4 4 4 4

24 61260 FLANGE, Exhaust 4 4 4 4 4 4 4

67195 FLANGE, Exhaust 4 4 4 4 4 4 4 4 4 4 4

25 STD´•35 WASHER, 5/16 8

26 ISTDa75 WASHER, 5/16 lock, internal teeth 8

27 ISTD-14I0 NUT, 5/16-18 8

See latest edition of Textron Lycoming Service Instruction No. 1060 for complete push rod application.

3-7

I lycoming 10, AIO´•3SO´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

hLaJ-Z1-1-,

1

i

jl\i:’1’’I /I/ii´•~I ,~/i

~i cc1~i iii

~i ii2

’Iio,

8

3

~ii I-I3

j

/1

iB CI~7C/ ´•i

/,r--j 9 a

23

/i:i

_1~3-125

6/x=

2711

´•i~-1

IIII11i II!1!1IM 3.5ItI2,4

;JI 2

14’ L16

i\i

Figure 20. CYLINDER RELATED PARTS

3-8


Williamsport PlantCYLINDER, PISTON AND VALVE TRAIN

CYLINDER HEAD DRAIN TUBES AND INTERCYLINDER COOLING BAFFLES

QUANTITY EER ASSEMBLY

FIG. N 10-360 AIO-360



L11B611D22611112F4111ABGDICDGABDBDEFFGAABB

1 STD´•684 N 3/8 I.D. hose 4

2 STD-1821* HOSE. 3/8 I.D. x 2-1/2 4 4 4 4 4 4 4

STD-2180** HOSE, 3/8 I.D. x 1-13/16 4 4 4 4 4 4 4 4 4 4 4 44

STD-21801t HOSE, 3/8 I.D. x 1-13/16 4 4 4 4

3 LW-1 5592-5´•05 CLAMP, Hose 8

4 68759* TUBE ASSY., hd. oil drain,

no. 1 1 1 1 1 1 1 1

72702* TUBE ASSY., hd. oil drain,

no. 1 1 1 1 1 1 1 1 1 1 1 111

72702+ TUBE ASSY., hd, oil drain,

no. 1 1 1 1 1

5 68760* TUBE ASSY., hd, oil drain,

no. 2 1 1 1 1 i 1 1

72703* TUBE ASSY., hd, oil drain,

no. 2 1 1 1 1 1 1 1 1 1 1 111

LW-118471r TUBE ASSY., hd. oil drain,

no. 2 1 1 1 1

6 68761* TUBE ASSY., hd. oil drain,

no. 384 2 2 2 2 2 2 2

74808* TUBE ASSY., hd. oil drain,

no. 3 1 1 1 1 1 1 1 1 1 1 111

74808+ TUBE ASSY., hd. oil drain,

no. 3 1 1 1 1

7 73027* TUBE ASSY. hd. oil drain,no.4 1 1 1 1 1 1 1 1 1 1 1 1 1

73027+ TUBE ASSY., hd. oil drain,

no. 4 1 1 1 1

8 75337 BAFFLE ASSV. 1 1 1 1 1 1 1 1 1 1 1 1 i

75338 BAFFLE ASSY., 1 1 1 1 1 1 1 1 1 1 1 11

75339 BAFFLE ASSY., 2 2 2 2 2 2

75339 BAFFLE ASSY., 1 1

LW-13389 e BAFFLE ASSY. 1 1

9 71611 RETAINER, inder baffle 2

10 71610 baffle retainer 2

11 172834 COVER, Baffle, i cable hole 2 2 2 2 2 2 2 2 2 2 2 2 2

12 ISTD-692 SCREW, No. 10´•32 x 1/2 rd, hd. 4 4 4 4 4 4 4 4 4 4 4 44

13 ISTD-670 NUT, No. 10´•32 4 4 4 4 4 4 4 4 4 4 4 44

14 1 AN931´•12S17 GROMMET, 3/4 I.D. x 1-3/8 O.D, x 318

thick 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

15 6561 PLUG, Baffle 1 1 1

656141 PLUG, Baffle 3 3 3 3 3 3 3 3 3 33

65614, PLUG, Baffle 4 4 4 4

65614~ PLUG, Baffle 5

16 ISTD-251 WASHER, No. 10 lock, internal teeth 1 1 1

STD-2511 WASHER, No. 10 lock, internalteeth 3 3 3 3 3 3 3 3 3 3 3

STD-251, WASHER, No. 10 lock, internalteeth 4 4 4 4

3-9

C~C i~:I Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CYLINDER HEAD DRAIN TUBES AND INTERCYLINDER COOLING BAFFLES (Continued)


FIG. N 10-360 AIO-360




STD´•251~ WASHER, No. 10 lock, internal teeth 5

17 1 STD-1686~ SCREW, No. 10-32 x 7/16 fill. hd. 1 1 1

STD-16861 SCREW, No. 10´•32 x 7/16 fill. hd. 3 3 3 3 3 3 3 3 3 3 3

STD-1686, SCREW, No. 10-32 x 7/16 fill. hd. 4 4 4 4

STD-I686I SCREW, No. 10-32 x 7116 fill. hd. 5

Parallel valve head.

Angle valve head;; Mooney installations.

Angle valve head; Cessna installations.

Assemble between cyls. no. 1 8 3.

Assemble in front of no. 1 cylinder head.

Assemble in rear of no. 3 8 4 cylinder heads and front of no. 1 cylinder head.

Baffle attaching parts for all cylinders.Customer request; baffle attaching parts for each cylinder plus 1 extra set.

7~ i~

aiiI i I

;iill,ibi!::4Ii i

10h:ir

14 4,5,6,7i iI/iI

dC"lilb?r;i I ii

?/-7. ´•’71

r~-´•

i5i/i,III!I!!I!I11i:

1)(I(jllllL3

I [jjJ(iiI 1/ol~l11

65

12

Figure 21. CYLINDER HEAD DRAIN TUBES AND INTERCYLINDER COOLING BAFFLES

3-10

LiWL~1: I Lycoming 10, AIO-360´•A, ´•B SERIES PARTS GATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport PlantIGNITION SYSTEM

MAGNETOS AND MAGNETO DRIVES (IO-360-A)

QUBNTITY PER ASSEMBLYFIG. N 10-360 AIO-360

A AREF. PART AB


L11B611D22611112F4111A86DCDGABDBDEFFGAABB

1 61665 GEAR, M ,im Ise 1 1 1 1 1

2 68C1 9622 GEAR, 1 1 1 1 1

68C19622 GEAR, 2 2 2 2 2

3 STD-713 COTTER PIN, 3/32 x 3/4 2 2 2 2 2 2 2 2

4 62224 GASKET, 1 1 1 1 1

62224 GASKET, 2 2

62224 GASKET, M neto 3

5 LW-1 2706 ADAPTER, im 1 1 1 1 1

6 LW-12681 GASKET, 2 2 2 2 2 2 2

BENDIX

7 LW-1 6301´•5´•3 MAGNETO, S4LN-204 1

LW-163005-2 MAGNETO, S4LN´•200, retard breaker 1

LW-1 63045-3 MAGNETO, S4LN´•204 1 1

LW-163005-11 MAGNETO, S4LN-200, retard breaker 1 1

LW-1 63045-6* MAGNETO, S4LN-204 1

LW-163005-11 MAGNETO, S4LN-200, retard breaker 1

LW-1 65045-3 MAGNETO, S4LN-204 1

LW´•51 360-55"* MAGNETO, S4LN´•21, im 1

LW-349305-1 MAGNETO, S4LN-1209 1 1 1 1

LW´•349365-3 MAGNETO, S4LN-1227, 1 1 1 1

LW-349305-1 MAGNETO, S4LN-1209 1 1 1 1

LW-349365-9 MAGNETO, S4LN-1227, 1 1 1 1

LW-349305´•1 MAGNETO, S4LN-1209 1


SLICK

8 ~BHP´•OSANN MAGNETO, Model No. 4270 1

66HR25SANN MAGNETO, Model No. 4247 1

66HP-0SAEN MAGNETO, Model No. 4242 1


66HP-OSANN MAGNETO, Model No. 4270 1 1 1 1

66HC25SFNN MAGNETO, Model No. 4273 1 1 1 1

~GHP´•OSANN MAGNETO, Model No. 4270 1 1 1 1 1 1

66HR15SANN MAGNETO Model No. 4245 1 1 1 1 1 1

BBHP-OSANN MAGNETO, Model No. 4270 1 1 1 1 1

66HC15SFNN MAGNETO, Model No. 4272 1 1 1 1 1

9 66M19385 CLAMP, 4 4 4 4 4 4 4 4

10 76961 CLAMP, 4 4 4 4 4 4 4 4

11 I STD-1727 WASHER, Plain, 3/4 O.D. x 11/32 l.D.

x 1/8 thick 4 4 4 4 4 4 4 4

12 ISTD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4

13 ISTD-1410 NUT, 5116-18 4 4 4 4 4 4 4 4

14 ILW-52305-1 KIT ASSY., terminal 1

LW-1 57209 KIT, terminal 1

LW-157209 KIT, nd terminal 2 2 2

LW-157208 KIT, retard terminal 1 1 1

Magneto w/ electric tachometer pickup.Magnetowlfeed-thru capacitor.

4-1


Williamsport Plant

i

,br~

6´•-~

:Ctr

6 "Ik i.-i

-:iIji

~h?c:1 If

oo"\C~‘ II;

[i

7 Lo \I

QLY ~5

S14

10

6 1A I

~vi 7

Figure 22. MAGNETOS AND MAGNETO DRIVES (IO-360-A)

4-2

I Lyceming 10, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant IGNITION SYSTEM

IGNITION HARNESSES, SPARK PLUGS AND ATTACHING HARDWARE (IO-360-A)


FIG. N 10´•a60 AIO´•360


23 NUMBER DESCRIPTION LIAIA 1 8 A A 1 A A B B B B B B 2 B A A B


1 67P20400 HARNESS, Slick No. M-2976 1 1 1 1 1

67P20403 HARNESS, Slick No. M-2977 1 1 1 1 1

67P20402 HARNESS, Slick No. M-4010 1


67P20402 HARNESS, Slick No. M-4010 1 1 1 1

67P20405 HARNESS, eft),Slick 1 1 1 1



67P20414 HARNESS, Slick Na. M-2982 1 1 1

67P20415 HARNESS, Slick No. M-2981 1 1 1





67P20428 HARNESS, Slick No. M-2990 1 1 1 1 1 1

67P20429 HARNESS, ,Slick No. M-2989 1 1 1 1 1 1

67L20422 HARNESS, Slick No. M-4026 1 1 1

67L20423 HARNESS, eft), Slick No. M-4025 1 1 1

2 1182´•J3" SPARK PLUG, 8 8 8 8 8 8 8 8

1182´•N4" SPARK PLUG, 8

1182-P3" SPARK PLUG, Auburn 8

01P19762-1-1** BAG, harness 1 1 1 1 1 1

01P19762-1-2** BAG, harness 1 1 1

01P19762-1´•6** BAG, harness 1 1 1

01P19762-1-74* BAG, harness 1

01P19762-1´•43** BAG, harness 1

01 P19762-2-5** BAG, harness 1 1 1 1 1 1

01 P19762-2´•7** BAG, harness 1 1 1 1

01 P19762-2-9** BAG, harness 1 1 1

01P19762-2-12** BAG, harness 1 1 1

Item No. 2 spark plugs are used in current production only. Additional spark plugs are available for these engines. See latest edition of

Service Instruction Na. 1042 for complete listing of all approved spark plugs.See page 4-4 for a breakdown of individual parts contained in the magneto and harness attaching parts bag. These parts to be attach-

ed by customer per engine line drawing included in each bag.

4-3

1O, AIO-360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

BAG MAGNETO BARNESS ATTACHING

P/N’S 01P19762-1-1, 01P19762-1-6, 01P19762-1-7, P/N 01P19762-1-2

01P19762-1-43

Part No. Part Name Qty. Part No. Part Name Qty.

LW-16266-25-25 CLAMP, 1 wire 2 LW-16266-25-25 CLAMP, I wire 2

LW-14060 CLIP, 2 wire 3 LW-14060 CLIP, 2 wire 3

STD-8 WASHER, 1/4 plain 8 STD-8 WASHER, 1/4 plain 8

STD-1874 SCREW, 1/4 lock (rocker box) 6 STD-1874 SCREW, 1/4 lock (rocker box) 6

76734 ZIP STRAP 8 76734 ZIP STRAP 8

LW-16266-25-50 CLAMP, 4 wire 1 LW-16266-25-50 CLAMP,4 wire 1

STD-1411 NUT, 1/4 plain 2 STD-696 WASHER, 1/4 thin 4

STD-696 WASHER 1/4 thin 4 AN500-416-18 SCREW, 1/4 x 1-1/8 long 3

AN500-416-18 SCREW, 1/4 x 1-1/8 long 3 LW-M-2375 PLATE, BaMe 2

LW-M-2375 PLATE, Baffle 2

P/N’S 01P19762-2-5, 01P19762-2-7, 01P19762-2-9

Part No. Part Name Qty.

LW-16266-25-25 CLAMP, 1 wire 4

LW-14060 CLIP, 2 wire 4

STD-S WASHER, 114 plain 8

STD-160 WASHER, 1/4 lock 1

r’

~iC

STD-1874 SCREW, 114 lock [rocker box) 4

9 LW-16266-25-50 CLIP, 4 wire 3

76734 ZIP STRAP 12

STD-1111 NUT, 1/4 plain iSTD-696 WASHER, 1/4 thin 4

AN500-416-18 SCREW, 1/4 x 1-118 long 1

STD1925 SCREW, lil ~518]ong 2

:tP~4 72815 BRACKET, Twist 3

73152 BRACKET, Straight 2

STD-692 SCREW, No. 10 5


STD-670 NUT, No. 10 5

LW-M-2375 PLATE 2

P/N 01P19762-2-12


LW-16266-25-25 CLAMP, 1 wire 4


STD-8 WASHER, 114 plain 8


77410 BRACKET, Ext. fuel inj. Line 1

STD-1874 SCREW, 1/4 lock 4

76734 ZIP STRAP 12

LW-16266-25-50 CLAMP, 4 wire 3

STD-1111 NUT, 1/4 plain 1

STD-696 WASHER, 1/4 thin 4

AN500-416-18 SCREW, 1/4 x 1-1/8 long 1

STD-1925 SCREW, 1/4 x 5/8 long 2

72815 BRACKET, Twist 3



STD-425 WASHER, No. 10 5

STD-670 NUT, No. 10 5

LW-M-2375 PLATE 2

Figure 23, IGNITION HARNESSES, SPARK PLUGS AND ATTACHING HARDWARE (IO-360-A)

4-4



MAGNETOS AND MAGNETO DRIVES (10-360-8)

QUANTITY PER ASSEMBLYFIG. N 10-360 AIO´•360

A AREF. PART A B24 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A B

L11B611D22611112F4111ABGDCDGABDBDEFFGAIABB

1 61665 ´•GEAR, i 1 1

61665 GEAR, 2 2 22

2 68C1 9622 GEAR, 1 1 1

68C19622 2 2

3 STD-713 COTTER PIN, 3132 x 2 2 2 2 2 2 2

4 62224 GASKET 1 1 1

62224 GASKET, 2 2 2 2 2 2

62224 GASKET, 3 3

62224 GASKET, 8 4

5 LW-1 2706 ADAPTER, 1 1

LW´•12706 ADAPTER, 2 2 2 2

6 LW-12681 GASKET, 2 2 2 2 2 2 2

7 LW-12706 ADAPTER, ,i 1

8 LW-15416 ADAPTER ASSY. drive 1

LW-14229 BEARING, i

LW-14228 drive retainer 1

9 LW-14910 COUPLING, drive 1

10 1 LW-1 4230 CUSHION, drive 2

BENDIX

11 I LW-51 360-29 MAGNETO, S4LN´•20 1 1

LW-51 360-37 MAGNETO, S4LN´•21, 1 1

LW-1 63045-3 MAGNETO, S4LN-204 1 1

LW-163005-2 MAGNETO, S4LN´•200, retard breaker 1 1

LW-163045-6* MAGNETO, S4LN´•204 1

LW´•163005-2 MAGNETO, S4LN´•200, retard breaker 1

LW-349305-1 MAGNETO, S4LN-1209 i 1

LW-349365-3 MAGNETO, S4LN´•1227, .cou 1 1

LW-349365´•3 MAGNETO, S4LN´•1227, cou 2 2 2 2

SLICK

12 I~BHP´•OSANN MAGNETO Model No. 4270 1 1

66HR25SANN MAGNETO Model No. 4247 1 1

66HP-OSAEN MAGNETO, Model No. 4242 1


66HP-OSANN MAGNETO, Model No. 4270 1 1 1

66HC25SFNN MAGNETO, Model No. 4273 1 1 1

66HR25SANN MAGNETO, 8 Lft.) Model No. 4247 2 2 2 2

13 166M19385 CLAMP, 4 4 4 4

14 76961 CLAMP, 4 4 4 4 4 4 4

15 STD-1727 WASHER, Plain, 314 O.D. x 21/64 I.D.

x 1/8 thick 4 4 4 4 4 4 4

16 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4

17 ISTD´•1410 NUT, 5/16-18 4 4 4 4 4 4 4

18 ILW´•52305´•1 KIT ASSY., terminal 2

LW-157209 KIT, terminal 2 2

LW´•157208 KIT, retard terminal 1 1

Magneto wl electric tachometer pickup.

4´•5

CI~J:C Lyesming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

;u

4

6

A i

5‘5´•´•:

~´•"4L- ~I,

fi;Lc/

J?

is1jr

i

S,

t- is

M,c /e~yI-r-

o

4 if1.cl

410O

’i,18

13

14157

16

Ilh 1 ~126 1

I u

11

Figure 24. MAGNETOS AND MACNETO DRIVES (IO-360-B)

4-6

L i~ Lycoming 10, AIOd60´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


IGNITION HARNESSES, SPARK PLUGS AND ATTACHING HARDWARE (IO-360-B)


FIG. N 10-360 AIO-360


25 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B 6 B 2 B A A B


1 67P20400 HARNESS, Slick No. M-2976 1 1

67P20403 HARN Slick No. M-2977 1 1

67P20402 HARNESS, Slick No. M-4010 1 1

67P20401 HARNE Slick No. M-2975 1 1

67P20412 HARNESS, Slick No. M´•4020 1 1


67P20416 HARNESS Slick No. M-2984 1 1 1 1 1

67P20417 HARNESS Slick No. M-2983 1 1 1 i 1


67P20419 HARNESS, Slick No. M-4021 i 1

67P20428 HARNESS, Slick No. M´•2990 1 1 1 1

67P20429 HARNESS, Slick No. M-2989 1 1 1 1

67L20422 HARNESS, Slick No. M4026 1 1

67L20423 HARNESS, Slick No. M-4025 1 1

2 1 i 82-B3 SPARK PLUG, 8 8 8 8 8 8 8

1182´•F3* SPARK PLUG, Auburn 8

1182-Q5* SPARK PLUG, Auburn 8

01P19762-1-1** BAG, harness 1 1 1 111

01P19762-1-6** BAG, harness 1

01P19762-1-43** BAG, harness 1 1

01P19762-2-5** BAG, harness 1 1

01P19762-2´•7** BAG, harness 1 1

01P19762-2-12** BAG, harness 1 1

Item No. 2 spark plugs are used in current production only. Additional spark plugs are available for these engines. See latest edition of

Service Instruction No. 1042 for complete listing of all approved spark plugs.See page 4´•8 for a breakdown of individual parts contained in the magneto 8 harness attaching parts bag. These parts to be attached

by customer per engine line drawing included in each bag.

4-7

Li ~C i i~:I Lycoming 10, AIO-360-A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

BAG MAe:NETO HARNESS ATTACHING

P/N’S 011319762-1-1, 01P19762-1-6, 01P19762-1-43


LW-16266-25-25 CLAMP, 1 wire 2


STD-8 WASHER, 1/4 plain 8


76734 ZIP STRAP 8

LW-16266-25-50 CLAMP, 4 wire 1



AN500-416-18 SCREW, 1/4 x 1-1/8 long 3



P/N’S 01P19762-2-5, 01P19762-2-7

W-16266-25-25 CLAMP, I wire 4


STD-S WASHER, 1/4 plain 8i~jjSTD-160 WASHER, 1/4 lock 1


76734 ZIP STRAP 12

LW-16266-25-50 CLAMP, 4 wire 3

I STD-1411 NUT, 114 plain 1


AN500-416-18 SCREW, 1/4 x 1-1/8 long 1






STD-670 NUT, No. 10 5

LW-M-2375 PLATE 2

P/N 01P19762-2-12

Part: No. Part Name Qty

LW-16266-25-25 CLAMP, 1 wire 4

LW-14060. CLIP, 2 wire 4



77410 BRACKET, Ext. fuel inj. line 1


76734 ZIP STRAP 12

LW-16266-25-50 CLAMP, 4 wire 3



AN500-416-18 SCREW, 1/4 x 1-1/8 long 1






STD-670 NUT, No. 10 5

LW-M-2375 PLATE 2

Figure 25, IGNITION HARNESSES, SPARK PLUGS AND ATTACHING HARDWARE (IO-360-B)

4-8

LIJ:C i~ Lyeoming 10, A10360-A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


MAGNETOS AND MAGNETO DRIVES (AIO-360)

QUAPITITY PER ASSEMBLY

FIG. N 10´•360 AIO-360

REF. PART A AA Al A 3 6



1 61665 GEAR, M ,i lee cou 1 1

61665 GEAR, Ise cou 2

2 68C1 9622 GEAR, 1 1

68C19622 GEAR, 2 2

3 STD-713 COTTER PIN, 3:32 x 314 2 2 2

4 62224 GASKET, 1 1

62224 GASKET,M rreto 2

5 LW-1 2706 ADAPTER, 1 1

LW-1 2706 ADAPTER, Ise 2

6 LW-12681 GASKET, 2 2 2

BENDIX

7 LW´•349305-1 MAGNETO, S4LN-1209 1

LW´•349365-3 MAGNETO, S4LN´•1227, 1

LW-349305-1 MAGNETO, S4LN-1209 1 1

LW-349365-9 MAGNETO, S4LN-1227, imp. 1 1

LW-349305-1 MAGNETO. S4LN´•1209 1


LW-349365-9 MAGNETO, S4LN-1227, im cou 2

SLICK

8 66HP-OSANN MAGNETO, Model No. 4270 1 1 1

66HR15SANN MAGNETO, Model No. 4245 1 1 1

66HC15SFNN MAGNETO, 8 Model No.

4272 2

66HP-OSANN MAGNETO, Model No. 4270 1

66HC25SFNN MAGNETO, Model No. 4273 1

9 66M19385 CLAMP, 4 4 4

10 176961 CLAMP, nato 4 4 4

11 I STD-1727 WASHER, Plain, 314 O.D, x 11/32 I.D.

x 1/8 thick 4 4 4

12 ISTD-475 WASHER, 5/16 lock, internalteeth 4 4 4

13 ISTD-1410 NUT, 5/16-18 4 4 4

4-9


Williamsport Plant

j5

-,1Z/1~2;"17:

a /ej´•Ia

/I~

o.;~Ji

b-´•’-\:\Io~ I~ B tu\ ´•’j

o \i

43-~.

mdh, ’4

O4

´•q10

B117

"~12

6

I

7

8

Figure 26. MAGNETOS AND MACNETO DRIVES (AIO-360)

4-10

I Lycoming 10, AIO-360-A, ´•B SERIES PARTS GATALOGWIDE CYLINDER FLANGE CRANKCASE MBDEL ENGINES


IGNITION HARNESSES, SPARK PLUG AND ATTACHING HARDWARE (AIO-360)

QUAPITITY PER ASSEMBLY

FIG. N 10´•360 AIO-360


27 NUMBER DESCRIPTION LIAIA 1 D A A 1 A A B B B B B B 2 B A A B


1 67P20400 HARNESS, Slick No. M-2976 1 1



67P20405 HARNESS, ,Slick 111

67P20412 HARNESS, Slick No. M´•4020 1 1



67P20415 HARNESS Slick No. M-2981 1

67P20416 HARNESS, ight), Slick No. M-2984 1




67P20428 HARNESS, Slick No. M´•2990 1


67L20422 HARNESS, Slick No. M´•4026 1 1

67L20423 HARNESS, Slick No. M-4025 1 1

2 1182-D4* SPARK PLUG, 8 88

01P19762-1-1*" BAG, harness 1

01P19762-1-2"* BAG, harness 1

01P19762´•1-7** BAG, harness 1

01P19762´•2´•5** BAG, harness 1 1 1

01P19762-2-7** BAG, M harness 1

01 P19762-2-9 BAG, harness 1

01P19762-2-12* BAG, M harness attachi 1 1

Item No. 2 spark plug is used in current production only. Additional spark plugs are available for these engines. See latest edition of

Textron Lycoming Service Instruction No. 1042 for complete listing of all approved spark plugs.See page 4-12 for a breakdown of individual parts contained in the magneto and harness attaching parts bag. These parts to be at-

tached by customer per engine line drawing included with each bag.

4-11

~FT itT´•T~Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Wisliam’sport Plant

BAG M[AGNETO HARNESS ATTACHING

P/N’S 01P19762-1-1, 01P19762-1-7 P/N 01P19762-1-2

Part No. Part Name Qty. I Part No. Part Name Qty.

LW-16266-25-25 CLAMP, 1 wire 2 LW-16266-25-25 CLAMP, 1 wire 2

LW-14060 CLIP, 2 wire 3 LW-14060 CLIP, 2 wire 3

STD-8 WASHER, 114 plain .8 STD-8 WASHER, 1/4 plain 8

STI)-1874 SCREW, 1/4 lock 6 STD-1874 SCREW, 1/4 lock (rocker box) 6

76734 ZIP STRAP 8 76734 ZIP STRAP 8

LW-16266-25-50 CLAMP, 4 wire 1 LW-16266-25-50 CLIP, 4 wire 1

STD-1411 NUT, 1/4 plain 2 STD-696 WASHER, 1/4 thin 4

STD-696 WASHER 1/4 thin 4 AN500-416-18 SCREW, 1/4 x 1-1/8 long 3

AN500-416-18 SCREW, 1/4 x 1-1/8 long 3 LW-M-2375 PLATE, Baffle 2

LW-M-2375 PLATE, BaMe 2

P/N’S 01P19762-2-5, 01P19762-2-7, 01P19762-2-9


LW-16266-25-25 CLAMP, 1 wire 4


s STD-8 WASHER, 1/4 plain 8



76734 ZIP STRAP 12

L,W-16266-25-50 CLAMP, 4 wire 3

STD-1111 NUT, 114 plain 1


AN500-416-18 SCREW, 1/4 x 1-1/8 long 1

c-






STD-670 NUT, No. 10 5

LW-M-2375 PLATE 2

P/N 01P19762-2-12


LW-16266-25-25 CLAMP, 1 wire 4



STD-16() WASHER, 1/4 lock 1

77410 BRACKET, Ext. fuel inj. line 1

STD-1874 SCREW, 114 lock (rocker box) 4

76734 ZIP STRAP 12

LW-16266-25-50 CLIP, 4 wire 3

STD-1411 NUT, 114 plain 1


AN500-416-18 SCREW, 1/4 x 1-1/8 long 1






STD-670 NUT, No. 10 5


Figure 27. IGNITION HARNESSES, SPARK PLUG AND ATTACHING HARDWARE (AIO-360)

4-12


Williamsport Plant IGNITION SYSTEMDUAL MAGNETOS AND MAGNETO DRIVES


FIG. N 10´•360 AIO-360REF. PART A A 1 A 3 B

A A

28 NUMBER DESCRIPTION LIAIA 1 B AIA 1 A A B B B B B B 2 B A A BL11B611D22611112F4111

ABGDICDGABDBDEFFGAABB1 LW-1 3643 GEAR, Retainer drive 1 12 LW-13641 CUSHION, drive 2 23 LW-1 2681 GASKET, 1 1

BENDIX

4 LW-685124-106 MAGNETO IGNITION SYSTEM

LW´•685124-110 MAGNETO IGNITION SYSTEM

LW-685124-110 MAGNETO IGNITION SYSTEM

LW-685124-123 MAGNETO IGNITION SYSTEM

5 LW-682555-11 1 1

6 66M19385 CLAMP 2 27 STD-475 5/16 lock, internal teeth 2 28 STD-1410 NUT, 5/16-18 2 2

9 LW-382698 KIT, terminal 2 2

´•´•ic c

i

3 I~IP:

i76~Y\?´•/j ..j j

1 s a´•~UI-/-I 1 r

\i (c~i;ii I

~cC-.;\1Y´•_.-X´•-(r

4, 5

Figure 28. DUAL MAGNETOS AND MAGNETO DRIVES

4-13

Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CAT#LOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


IGNITION HARNESSES (DUAL), SPARK PLUGS AND ATTACHING HARDWARE


FIG. N 10´•360 AIO-360

REF. PART AB

A A

29 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A BLllB611D22611112F411t

A86DCDGABDBDEFFGAABB1 67H21 450 HARNESS, 1 1

67H21452 HARNESS,67H21456 HARNESS, ition ix 1

2 1182-D4* SPARK PLUG, Champi 8 8

1182-U5* SPARK PLUG, Champi 8

01 P21 501-3-30"k BAG, harness 1

01 P21 501-6-31** BAG, harness 1

01P21501-8-47** BAG, harness 1 1

Item No. 2 spark plugs are used in current production only. Additional spark plugs are available for this engine. See latest edition ofService Instruction No. 1042 for complete listing of all approved spark plugs.

k* See below for a breakdown of individual parts contained in the magneto and harness attaching parts bag. These parts to be attached

by customer per engine line drawing included in each bag.

BAG MAGNETO HARNESS ATTACHING

P/N 01P21501-3-30 P/N 01P21501-6-31

Part No. Part Name Qty. Part No. Part Name Qty.

LW-16266-10-75 CLAMP, 6 wire 1 LW-14875 BRACKET, Extension, 900 1LW-16266-25-25 CLAMP, 1 wire 5 LW-16266-10-63 CLAMP, 4 wire 1LW-16266-25-75 CLAMP, 6 wire 1 STD-692 SCREW, No. 10-32 x 112 long 2LW-16266-10-63 CLAMP, 4 wire 2 STD-670 NUT, No. 10-32 self-locking 271824 CLIP, 2 wire 3 LW-16266-10-75 CLAMP, Shroud tube 1STD-1874 SCREW, 1/4-20 x 13/16 long 5 LW-16266-10-63 CLAMP, 4 wire 1STD-8 WASHER, 1/4 plain 10 76734 ZIP STRAP 19STD-670 NUT, No. 10-32 self-locking 2 STD-1874 SCREW, 1/4-20 x 13/16 long 5STD-692 SCREW, No. 10-32 x 1/2 long 2 STD-8 WASHER, 1/4 plain 10STD-28 WASHER, No. 10 plain 2 71824 CLIP, 2 wire 3LW-14875 BRACKET, Extension, 900 1 LW-16266-25-25 CLAMP, 1 wire 276734 ZIP STRAP 16

P/N 01P21501-8-47

1 LW-16266-10-75 CLAMP, 6 wire 3


LW-16266-10-63 CLAMP, 4 wire 3LW-14875 BRACKET, Extension, 900 171824 CLIP, 2 wire 3LW-16266-25-25 CLAMP, 1 wire 2

L~-. 76734 ZIP STRAP 21STD-692 SCREW, No. 10-32 x 1/2 long 3

cnN1

STD-670 NUT, No. 10-32 self-locking 3STD-1874 SCREW, 1/4-20 x 13/16 long 5STD-8 WASHER, 1/4 plain 10

Figure 29. IGNITION HARNESSES (DUAL), SPARK PLUGS AND ATTACHING HARDWARE

4-14

CnlCir~: I Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant ELECTRICAL SYSTEM

ALTERNATOR AND GENERATOR MOUNTING BRACKETS


FIG. N 10-360 AIO´•360


30 NUMBER DESCRIPTION LIAIAII B A A 1 A A B B B B B B 2 B A A B


1 70419 BRACKET, Generator 2 2 2 2 2 2 2 2 2

2 74324 BRACKET, Alternator 1 1 1 1 1 1 i

07A19474 BRACKET, Alternator 1

76906 BRACKET, Alternator 1 i 1 1 1

3 LW´•13365 BRACE, Alternator bracket 1

4 73383 LOCKPLATE, 5/16 bi,lt x 1.00 1

733831 LOCKPLA 5/16 bolt x 1.00 2 2 2

73383, LOCKPLATE, 5116 bolt x 1.00 2 2 2 2 2 2 2 2

5 STD-475 a WASHER, 5/16 lock, internal teeth 1

6 LW-31-O.94 BOLT, 5/16´•18 x 15116 hex. hd. 2

LW´•31-0.94 a BOLT, 5/16´•18 x 15/16 hex. hd. 3

LW-31´•0.941 BOLT, 5/16-18 x 15/16 hex. hd. 4 4 4

LW-31´•0.94, BOLT, 5/16-18 x 15/16 ,hex. hd. 4 4 4 4 4 4 4 4

7 76028 LINK, Generator 1 1 1 1 1 1 1 1 1

8 LW-1 0729 LINK, Alternator 1 1 1 1 1

74325* LINK, Alternator 1 1 1 1 1 1 1

75380** LINK, Alternator 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

75380+ LINK, Alternator 1 1 1 1 1 1 1 1 1 ill

9 STD-35 WASHER, 5/16 1

10 LW-31HO.75 BOLT, 5/16´•18 x 3/4 hex. hd. 1

LW-31-0.94´• BOLT, 5116´•18 x 15/16 hex. hd. 1

LW-31HO BOLT, 5/16´•18 x 7/8 hex, hd. 1 1 1 1 1

11 I STD-1727 WASHER, Plain, 3/4 O.D. x 11132 I.D.

x 1/8 thick 1

12 LW-31HO.75 BOLT, 5/16-18 x 314 hex, hd. 1

13 77718 STRUTI Generator 1 1 1

14 176908 STRUT, Alternator 1 1 1 1 1

74323 STRUT, Alternator 1

15 1 LW-31H0.75 BOLT, 5/16-18 x 3/4 hex. hd. 1

LW91H0.88 BOLT, 5116-18 x 7/8 hex, hd. 1 1 1 1 1

16 LW-31S1.161 BOLT, 5/16-18 x 1-5/32 dr, end 1 1 1

LW-31S1.16, BOLT, 5116-18 x 1-5/32 ,dr, end 2 2 2 2 2 2 2 2

17 1 LW-31S1.281 BOLT, 5116-18 x 1-9132 dr, end 1 1 1

18 ISTD´•35 WASHER, 5116 AR AR

19 ISTD-142O NUT, 5/16´•18 slotted 2 2 2 2 2 2 2 2 2

20 STD´•GB PIN, Cotter, 1116 dia. x 1/2 2 2 2 2 2 2 2 2 2

21 ISTD-69O WASHER, 13/16 O.D, x 25/64 I.D.

x 1/16 thick 1

22 AN6-14** BOLT, 3/8-24 x 1-37164, hex, hd.,

dr. end 1 1 i 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

AN6-17 BOLT, 3/8´•24 x 1-61164, hex, hd.,

dr. end 1 1 1 1 1 1 1 1 1 1 1 1

AN6-32* BOLT, 318-24 x 3-21164, hex. hd.,

dr, end 1 1 1 1 1 1 1

23 ISTD-690 WASHER, 13116 O.D. x 25164 I.D.

x 1/16 thick

24 ISTD-872 NUT, 3/8-24 slotted 1

25 STD-713 PIN, Cotter, 3132 dia. x 3/4 1

5-1

L i ~C Lycoming 10, A103M)-A, ´•B SERIES PAATS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport PlantELECTRICAL SYSTEM

ALTERNATOR AND GENERATOR MOUNTING BRACKETS (Continued)


FIG. N 10-360 AIO´•360




26 AN6-16 BOLT, 3/8-24 x 1-53164, hex. hd.,

dr. end 1

27 76534 SHIM, 1-1/8 O.D. x 13132 I.D. x .005

thick

28 STD-690 WASHER, 13116 O.D, x 25/64 I.D. x

1/16 thick


30 ISTD-713 PIN, Cotter, 3132 dia, x 3/4 1

Used withPIN 74324 alternator bracket.

Used with 12 volt-40 amp. alternators only, PIN 07A19474 alternator bracket and shorter bolt.

Used with 12 volt-70 amp., 24 voltdO amp, or 24 volt-70 amp, alternators and PIN 07A19474 alternator bracket.

a Used with PIN 76906 alternator bracket and PIN LW-13365 brace.

Used with PIN 76906 alternator bracket; no brace.

Used with 24 volt-40 amp, and 24 voltdO amp, generators, P/N 77718 strut and PIN 70419 generator bracket.

Used with generators except 24 volt-40 50 amp, and PIN 70419 generator bracket.

7

112

a

x:J

ii~u

,J.:W

´•:r315 41

5

jiii;i;6- Y’

I ii

~c.I-r ira41~ti

3

191

~s.171

27

j B 6

5’D 4 27

c ‘V 4

Figure 30. ALTERNATOR AND GENERATOR MOUNTING BRACKETS

5-2

1O, AIO´•360´•A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


100 AMP ALTERNATOR MOUNTING AND ATTACHING PARTS


FIG. N 10-360 AIO´•360

REF. PART A AA A 3 B

31 NUMBER DESCRIPTION LIAIA 1 6 A A 1 A A B B B B B B 2 B A A BLllB611D22611112F4111


1 LW-14141 BRACKET, Alternator, front 1

2 LW-14142 BRACKET, Alternator, rear 1

3 73383 LOCKPLATE, 5/16 bolt x 1.00 2

4 LW-31-0.94 BOLT, 5/16´•18 x 15/16 hex. hd. 4

5 LW-11147 BRACKET, Alternator belt 1

6 STD-1727 WASHER, Plain, 314 O.D, x 11/32 I.D.

x 1/8 thick 1

7 LW-14637" SHIM, 13116 O.D. x 11/32 I.D, x .005

thick

8 LW-14649* SHIM, 13/16 O.D, x 11/32 I.D, x .010

thick

9 LW-31H1.22 BOLT, 5/16-18 x 1-7/32 hex. hd.,drilled 1

10 LW-19265 PULLEY SHAFT ASSY., Alternator

dual belt usti 1

11 76420 PULLEY, Alternator idler, dual 1

12 78629 BALL BEARING, Double row, alt.

idler 1

13 1 MS16625-1125 RING, Internal retaini 1-114 dia. 2

14 LW´•19238 SHAFT, Alternator dual belt idler 1

15 76768 LOCKWASHER, Alternator idler

16 76769 LOCKNUT, Art. idler 1

17 1 LW-11635 SHIELD, Idler shaft 1

18 ISTD´•669 WASHER, 33/64 I.D. x 1.00 O.D. x 118

thick 1

19 ISTD-2221 NUT, 112-20 1

20 STD´•1 727 WASHER, Plain, 3/4 I.D. x 11/32 I.D, x

118 thick 1

21 1 LW-31H1.22 BOLT, 5/16-18 x 1-7/32 hex. hd.,drilled 1

22 1 LW-14637* SHIM, 13/16 O.D, x 11/32 I.D. x .005

thick

23 1 LW-10970 STRUT, Alternator 1

24 1 LW-31H0.75 BOLT, 5/16-18 x 3/4 hex. hd.,drilled 1

25 LW-14650* SHIM, 7/8 O.D, x 15/32 I.D. x .005 thick

26 AN7-14 BOLT, 7/16-20 UNF-SA x 1-19132

dr. end 1

27 ISTD-632 WASHER, 7/16

28 AN310-7 NUT, 7/16 slotted 1

29 ISTD-761 PIN, Cotter, 3132 dia. x 1.00 1

30 AN7-12 BOLT, 7/16-20 UNF-3A x 1-11/32

dr. end 1

31 STD-632 WASHER, 7116

32 AN31 0-7 NUT, 7/16-20 ,slotted 1

33 ISTD-761 PIN, Cotter, 3/32 dia. x 1.00 1

Shim as required for belt alignment between crankcase idler adjusting bracket, alternator and alternator bracket.

5-3

Ci ~I i iT´•l:l Lycoming 10, AIO-360A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

L~´•7--~

8 13

z

16

i’,

~,GB8

I

o 1of/-~c/

‘Y: o~

~O 26

2 23

27

125

33

Figure 31. 100 AMP ALTERNATOR MOUNTING AND ATTACHING PARTS

5-4

Lycoming 10, AIOJBO´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MQDEL ENGINES


ALTERNATOR ASSEMBLY AND BELT


FIG. N 10-360 AIO-360

REF. PART A AA

B

32 NURIIBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A B


1 74880 ALTERNATOR ASSY., 12 volt, 70

.25:1 1

2 74319 ALTERNATOR, 10071 1

3 74863 PULLEY, Alternator .25:1 1

4 74878* FAN 8 BAFFLE ASSY., Alternator 1


50:1 1

6 74319 ALTERNATOR, 10071 1

7 761 58 PULLEY, Alternator :1 1

8 74878" FAN 8 BAFFLE ASSY., Alternator 1

9 78308 ALTERNATOR, 12 volt,40 11 1 1 1111

10 LW-14304 ALTERNATOR, 12 volt,50 1 1 1 1 1

11 LW-18904 ALTERNATOR ASSY., 12 volt, 100

am .25:1 1

12 LW-1 8888 ALTERNATOR, V-851 1

13 76421 PULLEY, Alternator .25:1 1


.25:1 1

15 1 LW-14313 ALTERNATOR, Y-8420LS 1

16 LW´•10512 PULLEY, Alternator .25:1 1

17 ILW-14371 ALTERNATOR ASSY., 12 volt, 60

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18 1 LW-14313 ALTERNATOR, Y 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

19 1 36819484 PULLEY, Alternator .25:1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1


.25:1 ratio 1 1 1 1 1

21 1 LW-14318 ALTERNATOR, -8421 1 1 1 1 1

22 3681 9484 PULLEY, Alternator .25:1 ratio 1 1 1 1 1


.25:1 ratio 1 1

24 1 LW-15403 WASHER, 11/16 I.D, x 1-114 O.D, x

.115 thick 1 1

25 ILW-14333 ALTERNATOR, Y-6420L 1 1

26 1 36819484 PULLEY, Alternator .25:1 ratio 1 1

27 32C19551 ALTERNATOR ASSY., 24 volt, 50

.25:1 ratio 1 1 1 1 1 1 1 1

28 LW-I 4321 ALTERNATOR, (ALT-8421 1 1 1 1 1 1 1 1

29 1 36819484 PULLEY, Alternator .25:1 ratio 1 1 1 1 1 1 1 1

30 1 32Ci 9553 ALTERNATOR ASSY., 24 volt, 70

:1 ratio 1 1 1 1 1 1

31 LW-1 4326 ALTERNATOR, 1 1 1 1 1 1

32 36819484 PULLEY, Alternator 1 ratio 1 1 1 1 1 1


:1 ratio 1

34 LW-15403 WASHER, 11/16 I.D. x 1´•114 O.D. x

.115 thick 1

5-5

Lycoming 1O, AIO-360-A, -B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


ALTERNATOR ASSEMBLY AND BELT (Continued)


FIG. N 10´•360 AIO-360

REF. PART A AA Al A 3 8

32 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B 8 2 B A A 8


35 LW-14329 ALTERNATOR, U-6421 1

36 36819484 PULLEY, Alternator (3.25:1 1

37 LV\I-18900 ALTERNATOR ASSY., 24 volt, 100

.(dual 1

38 LW-1 8885 ALTERNATOR, (ALV-8511 1

39 76421 PULLEY, Alternator (dual 1

40 1 37A19773-367 BELT, Alternator drive wide 1

37A19773-376 BELT, Alternator drive wide 1

37A19773M396 BELT, Alternator dual, idler ul

tak 1

These parts are no longer available for purchase through Textron Lycoming.

NOTE

See latest edition of Textron Lycoming Service Instruction No. 1154 for complete listing of FAA approved starters,

generators, alternators, regulators and relays.

40

3,7,1 3,1 6.1 9.22,2629,3 2,3 6,3 9

4,34

4,8

~C/ 2,6,9;1 0,1 2,1 5 ,1 8, 21, 25,28,31,3 5,38

Figure 32. ALTERNATOR ASSEMBLY AND BELT

5-6



STARTER MOTOR AND ATTACHING PARTS


FIG. N 10-360 AIO-360A AREF. PART A

B33 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B B B B B 2 B A A B

L118611D22611112F4111A86DICDGABDBDEFFGAABB

1 LW-1 5571 STARTER, Prestolite

12/14 12 volt 1

LW-I 5572 STARTER, Prestolite HE-401

12/14 24 volt 1 1 1 1 1 1 1 1 1 1 1

2 31A21198* STARTER ASSY., Textron L

12/14 12 volt 1

31821064* STARTER ASSY., Textron L

12114 24 volt 1 1 1 1 1 1 1 1 1 11

3 31821199 MOTOR 8 SOLENOID ASSY. 112 1

31821143 MOTOR 8 SOLENOID ASSY. 124 1 1 1 1 1 1 1 1 1 11

4 31021088 HOUSING ASSY., Starter 1

5 STD-514 DOWEL 2

6 LW´•25´•1.75 BOLT, 1/4´•20 x 1-3/4 hex, hd. 1

7 LW-25-2.00 BOLT, 1/4-20 x 2.00 hex. hd. 2

8 STD-1 60 WASHER, 1/4 lock, internal teeth 3

9 STD8 WASHER, 1/4 3

10 01L21158* SHIM, Starter 1

11 1 01L21159" SHIM, Starter 1

12 STD-35 WASHER, 5/16 n 4

13 ISTD-475 WASHER, 5116 lock, internal teeth 4

14 LW-31-1.16 BOLT, 5/16-18 x 1´•5/32 hex. hd. 1

15 STD-1410 NUT, 5116-18 3

See latest edition of Textron Lycoming Service Instruction No. 1447 for starter kit information.

NOTE

See latest edition of Textron Lycoming Service Instruction No. 1154 for complete listing of FAA approved starters,generators, alternators, regulators and relays.

5-7


Williamsport Plant

i

9´•´•

~j i’.ii’

c‘,-i

c,

F3~,

r:

~I12

15-c~´•:::a 13

rfC]-~

1

L.

lo5

~ka 2

1379

Y ~.oi

8B

o

1210

13

14

Figure 33. STARTER MOTOR AND ATTACHING PARTS

5-8

LiJ:~irT´•l:l Lycoming 1O, AIO-360-A, ´•B SERIES PARTS CATALOG.WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant OIL SUMP AND INDUCTION SYSTEM

OIL SUMP ASSEMBLY AND OIL SUCTION SCREEN


FIG. N 10-360 AIO-360

REF. PART A AA A, B


L118611D22611112F4111A86DCDGABDBDEFFGAABB

1 LW-13353 GASKET, Oil 1 1 1 1 1 1 1 1 1 i 1 1 i i 1 1 1

2 74384 SUMP ASSY., Oil 1 1 1 1 1 1 1 1 1 1

78778$r SUMP ASSY., Oil 1

LW-10826 SUMP ASSY., Oil 1 1 1 1 1 1

LW-13864* SUMP ASSY., Oil 1

LW-14290* SUMP ASSY., Oil 1

3 69602 CONNECTION, Intake 4

78914 CONNECTION, Intake 4 4 4 4 4 4

4 61400 STUD, 1/4-20 x 1-3116 4 4 4 4 4 4 4

61400 STUD, 1/4-20 x 1-3116 6 6 6 6 6 6 6 6 6 6

5 31C-14 STUD, 5/16-18 x 1-314 4 4 4 4 4 4 4 4 4 4

6 31C-17 STUD, 5/16-18 x 2-1/8 4 4 4 4 4 4

31C-17** STUD, 5/16-18 x 2-1/8 2

7 31C-15** STUD, 5/16-18 x 1´•7/8 2

8 31C-25 STUD, 5/16-18 x 3-1/8 4

9 1102 PLUG, 1/8-27 NPT, Alien hd. 1 1 1 1 1 1 1 1 1 1

10 STD´•91 PLUG, 112´•14 NPT, hd., drilled 1 1 1 1 1 1

11 STD-551" X PLUG, 112-14 NPT, hd., drilled 1 1

STD´•551 PLUG, 112-14 NPT, .hd., drilled 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

STD´•551* PLUG, 112-14 NPT, hd., drilled 3

12 ISTD8 WASHER, 114 26126126 26126126 26126

STD-81r WASHER, 1/4

STD-8 WASHER, 1/4 28128 28128128

13 ISTD-1BO~ WASHER, 1/4 lock, internal teeth 19

STD-160 WASHER, 1/4 lock, internal teeth 20120120 20120120120 20120120 20120120

14 LW´•25-0.94+ BOLT. 1/4-20 x 15116 hex. hd. 7

LW-25-0.94 BOLT, 1/4-20 x 15/16 hex. hd. 12112112112112112112112112112

LW´•25-0.94 BOLT, 1/4-20 x 15116 hex. hd. 14114 14114114114

15 LW-25-1.13 BOLT, 1/4-20 x 1-118 ,hex, hd. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

16 1 STD-1411 NUT, 1/4-20 12112112112112112112112112112112112 12112112112

STD-1411+ NUT, 114-20 17

17 STD-8 It WASHER, 114 n 4

18 1 LW´•25´•1.25 BOLT, 1/4-20 x 1´•1/4 hex. hd. 1

19 1 AN365-420C NUT, 1/4-20 1

20 70484 SCREEN, Oil suction 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

21 106E19769-1.00 GASKET, 1.00 l.D. x 1-1/4 O.D. x 3/32

annular 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

22 LW-12545 PLUG, 5/8 hex. hd, x 1.00´•20 thd. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

This sump to be used in conjunction with Christen Kit when converting to aerobatic configuration. Reference the latest edition of

Textron Lycoming SSP-291 for aerobatic components.This sump has fuel injector mounted on two short studs in down position.This sump has horizontal rear mounted fuel injector.

6-1

L i ~C ~:I Lycoming 10, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

2 O

~1/o(

4~J~--12

f

2

~11

i-/4220

2122

6

17,1 8,1i ’/7‘

3

1 IO-360-B1E ONLYIO-360-B1E ONLY

4

Figure 34, OIL SUMP ASSEMBLY AND OIL SUCTION SCREEN

6-2

L i j:C i~l:l LyccPming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CRANKCASE COVERS AND INDUCTION HOUSING (AIO-360)


FIG. N 10-360 AIO-360

REIF. PART A AA A, B

35 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B 8 B B B B 2 B A A B


1 77055 GASKET, Crankcase cover, 1 11

2 77126 CRANKCASE COVER ASSY., U 1 1 1

3 STD-8 WASHER, 1/4 2112112


5 LW-25-0.94 BOLT, 1/4-20 x 15/16 hex. hd. 0110110

6 STD-1411 NUT, 1/4-20 n 2 2 2

7 MS29512-10 SEAL, Oil, 3/32 dia, section x 3/4 I.D. 1 1 1

8 AN815-10 UNION, 5/8 dia. flared tube 1 1 1

9 MS29512-12 SEAL, Oil, 7/64 dia. section x 59/64 I.D. 1 1 1

10 AN924-12D NUT, Flared tube, bulkhead fitti 1 1 1

11 AN838-12D ELBOW, 3/4 dia. hose, bulkhead, 900 1 11

12 77056 GASKET, Crankcase cover, lower 1 1 1

13 77132 CRANKCASE COVER ASSY., Lower 1 1 1

14 771 55 FITTING, 5/8 ,900 1 1 1

15 1 STD-1164 INSERT, 5116-18 Helicoil x 5/8 4 4 4

16 1 STD-1353 INSERT, No. 10-24 Helicoil x 318 4 4 4

17 ILW´•25´•1.13 BOLT, 1/4-20 x 1-1/8 ,hex, hd. 2 2 2


19 ISTD-1BO WASHER, 1/4 lock, internal teeth 16116116

20 LW-25-0.94 BOLT, 1/4-20 x 15/16 hex, hd. 12112112

21 ISTD-1411 NUT, 1/4-20 n 4 4 4

22 LW-25-1.13 BOLT, 114-20 x 1-1/8 ,hex. hd. 2 2 2

23 77117 SPACER, Induction 4 4 4

24 77127 HOUSING ASSY., Induction 1 1 1

25 131C-14 STUD, 5/16-18 x 1-3/4 4 4 4

26 1102 PLUG, 118-27 ,Allen hd. 4 44

27 STD-35 WASHER, 5/16 4 4 4

28 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4

29 ILW-31-4.13 BOLT, 5/16-18 x 4-1/8 hex. hd. 4 4 4

30 170484 SCREEN, Oil suction 2 2 2

31 06E19769-.00 GASKET, 1.00 l.D, x 1-1/4 O.D, x 3132

annular 2 2 2

32 LW´•12545 PLUG, 5/8 hex. hd. x 1.00-20 thd. 2 2 2

6-3

L i 3):C Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

4-S.1

11

IL

1 pt

i\

-gIj ~.rn

sii\/=i’J

/eYi,

Ij

~Rs4

,II

i:C iI

iIs~L"i i~d aoi!I I

=-e_

1

13

1819

18

1523

21

17,2

27

2

29-~ El

2

Figure 35. CRANKCASE COVERS AND INDUCTION HOUSING (AIO-360)

6-4

L i J:67t~ LycQming 1O, AIO-360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport PlantOIL SUMP AND INDUCTION SYSTEM

INTAKE PIPES

QUANTITY PER ASSEMBLYFIG. N 10-360 AIO-360

REF. PART A AA

B

36 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B 6 B B B 2 B A A BL11B611D22611112F4111


1 77569 SEAL, Intake 4 4 4 4 4 4 4 4 4 4 4 44

2 70485 PIPE, Intake, all inders 4 4 4 4 4 4

71712 PIPE, Intake, no. 162 2

71713 PIPE, Intake, no. 364 2

78741 PIPE, Intake, no. 1 1 1 1 1 1 1 1 1 1 1

78742 PIPE, Intake, inder no. 2 1 1 1 1 1 1 1 1 1 1

78743 PIPE, Intake, inder no. 3 1 1 1 1 1 1 1 1 1 1

78744 PIPE, Intake, no. 4 1 1 1 1 1 1 1 1 1 1

78621 PI Intake, inder no. 1 1 1 1

78622 PIPE, Intake, inder no. 2 1 1 1

78623 PIPE, Intake, inder no. 3 1 1 1

78624 PIPE, Intake, no. 4 1 1 f

LW-1 0481 PIPE, Intake, no. 1 1

79002 PIPE,lntake, no. 2 1

LW-1 0483 PIPE, Intake, no. 3 1

LW-1 0484 PIPE, intake, no. 4 1

3 69603 HOSE, 1-3/4 I.D. x 2-3116 O.D. x 1´•3/4

4444444

4 LW´•15592-8-28 CLAMP, Hose 8 8 8 8 8 8 8

5 71973 GASKET, 2 bolt 1-718 I.D. 4

6 73346 FLANGE, Intake 4 4 4 4 4 44

7 STD8 WASHER, 114 n 8

8 STD-1BO WASHER, 114 lock, internal teeth 8

9 LW´•25-1.25 BOLT, 114-20 x 1-1/4 hex. hd. 8

10 74139 ADAPTER ASSY., Fuel drain valve 2

75444 ADAPTER ASSY., Fuel drain valve 1 1 1 1 1

11 1102* PLUG, 1/8´•27 NPT, Alien hd. 2

1102* PLUG, 1/8´•27 NPT, Alien hd. 4

Assemble in fuel drain bosses in sump.

6-5

L i Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOG


Williamspora Plant

~--2

L7

d

’O/I

2

,,I

LV/

Figure 36. INTAKE PIPES

6-6


Williamsport Plant OIL SUMP AND INDUCTION SYSTEMFUEL INJECTORS AND INJECTION NOZZLES

QUANTITY PER ASSEMBLYFIG. N 10-360 AIO-360

A AREF. PART AB


ABGDCDGABDBDEFFGAIABB

1 66224 GASKET, Fuel ini 1 1 i 1 1 1 1 1 1 1 1 1 1

66224 GASKET, Fuel ini 2 2 2 2 2 2 2

2 73161 SPACER, Fuel ini 1 1 1 1 1 1

74842 SP Fuel ini 1

3 73937 FUEL INJECTOR 11 1 1 1 1 1 1 1 1 1 1 1

74556 FUEL INJECTOR 147-1 1 1 1 1 1

76504 FUELINJECTOR ´•1 1

76817 FUEL INJECTOR -11 1 1 1

77752 FUEL INJECTOR 1´•1 1 1

LW´•11848 FUEL INJECTOR 1 i 1 1 1

LW-14382* FUEL INJECTOR 1

4 STD-35 WASHER. 5116 4

5 STD-1410 NUT, 5/16-18 4

6 STD-1 763 LOCKNUT, 5/16 ut 4

7 LW-I 8265 NOULE, 4

8 LW-18854* NOZZLE ASSY., Manifold air bleed 4 4

9 951391 "0" RING, 8 8

Used with PIN LW-14576 manifold assembly.Vented nozzles.

6´•7


Williamsport Plant

4~3i´•

.I_’90~

I I~O

Figure 37. FUEL INJECTORS AND INJECTION NOZZLES

6-8

1O, AIO´•360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL MANIFOLDS AND BRACKETS


FIG. N 10´•360 AIO-360




1 75279 MANIFOLD ASSY., Fuel 1 1 1 1 1 1 1 1 1 1

75279* MANIFOLD ASSY., Fuel 1 1 1

75280 MANIFOLD ASSY., Fuel 1 1 1 1 1

77208 MANIFOLD ASSY., Fuel 1 1 1

78805 MANIFOLD ASSY., Fuel 1

LW-14576 MANIFOLD ASSY., Fuel 1

LW-18476* MANIFOLD ASSY., Fuel 1

2 MS20822-4 ELBOW, 1/4 tube, 1/8 NPT, 900 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

MS20822-4* ELBOW, 1/4 tube, 1/8 NPT, 900 1 1 1

3 AN791-2 ELBOW, Union, 118 tube, 450 4 4 4 4 4 4 4 4 4 4 4 4 4

AN791-2" ELBOW, Union,l/8 tube, 450 4 4 4

4 STD-148 NIPPLE, Union, 1/8 NPT 4 4 4 4 4 4

5 75447 NIPPLE, 3116 tube to 1/8 NPT (rest. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

75447* NIPPLE, 3116 tube to 1/8 NPT (rest. 1 1 1

6 AN816´•4 NIPPLE, 1/4 tube, 1/8 NPT 1

7 AN932-2 PLUG, 118-27 NPT, Alien 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

AN932-2 f PLUG, 1/8-27 NPT, Alien 3

AN932-2* PLUG, 1/8-27 NPT, Alien 2 2 2

1102 PLUG, 118-27 NPT, Alien (alternate 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1102"* PLUG, 1/8-27 NPT, Alien (alternate 3

1102* PLUG, 118-27 NPT, Alien (alternate 2 2 2

8 73966 SPACER, Fuel manifold bracket 2 2 2 2 2

9 74597 BRACKET, Fuel manifold 1 1 1 1 1

74598 BRACKET, Fuel manifold 1 1 1 1 1

10 75009 BRACKET, Fuel manifold 1 1 1 1 1 1 1 1 1 1

75009* BRACKET, Fuel manifold 1 1 1

77547~ BRACKET, Fuel manifold 1

11 78714 BRACKET, Fuel manifold 111

12 1 STD-1907 SCREW, No. 10-24 x 9/16 ,flat hd. 4 4 4 4 4

13 ISTD-1908 WASHER, Na. 10 lock, art. teeth, 820 4 4 4 4 4

14 ISTD-251 WASHER, No. 10 lock, internalteeth 4 4 4 4 4 4 4 4 4 4 4 4 44

STD-251* WASHER, No. 10 lock, internalteeth 4 4 4

15 ISTD-82 SCREW, No. 10-24 x 112 rd. hd. 4 4 4 4 4 4 4 4 4 4 4 4 44

STD-82* SCREW, No. 10-24 x 112 rd. hd. 4 4 4

16 1 STD-160 WASHER, 1/4 lock, internal teeth 1 1 1 1 1 1 1 1 1 1 1

Sto-160$ WASHER, 1/4 lock, internalteeth 2 2 2

STD´•1 60* WASHER, 1/4 lock, internal teeth 1 1 1

17 LW-25-0.50 BOLT, 1/4-20 x 1/2 hex. hd. 1 1 1 1 1 1 1 1 1 1 1

LW-25-0.50* BOLT, 1/4-20 x 1/2 hex, hd. 1 1 1

18 1 AN500A416´•10~ SCREW, 1/4-20 x 5/8 ,fill. hd. 2 2 2

Flow divider mounted on right side of engine between no. 1 and no. 3 cylinders.This manifold assembly uses an extra 1/8-27 NPT Alien plug for a quantity of (3) three in place of a PIN 75447 nipple per customer

request.Assemble between no. 1 and no. 3 cylinders.Assemble between no. 2 and no. 4 cylinders.Used with PIN 78714 fuel manifold bracket.

6-9

CI i Lycoming 10, AIO´•360A, ´•B SERIES PA#TS CATAU)GWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

4 3 4

/5 /5 /54\ /2 3\ 4\

/2 /6

75 77208 788057-- 3-- 7--

\4 \37/ 47

3;4 7 47/5 /5

3\ /2 4\/2

75279 145767-- 3 7--

\31 8: \4

~Yr27/7/

3 4

,4-7f LW-1~476

rI /--lo 37 1 ~--9 1

6,

6,

141

Figure 38. FUEL MANIFOLDS AND BRACKETS

6-10

Lycoming 1O, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FbANGE CRANKCASE MODEL ENGINES

Williasnsport Plant OIL SUMP AND INDUCTION SYSTEM

FUEL LINES AND ATTACHING PARTS

QUANTITV PER ASSEMBLYFIG. N 10´•360 AIO´•360

A AREF. PART AB



1 LW´•12098-0-170 TUBE ASSY., Fuel manifold 4 4 4 4 4

2 LW-12098-0-140 TUBE ASSY., Fuel manifold to nozzle,1&3 2222222222 2 22 222

3 LW-12098-0-210 TUBE ASSY., Fuel manifold to

2&4 2222222222 2 22 222

4 LW-12098-0-140 TUBE ASSY., Fuel manifold to nozzle,.2&4 2

5 LW-12098´•0-210 TUBE ASSY., Fuel manifold to nozzle,1&3 2

6 LW-16266´•10-75 CLAMP 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

LW-16266-10-75 CLAMP 8 8 818 8

7 LW-16266-10-13 CLAMP 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 66

LW´•16266-10-13 CLAMP 8 8 8 88

8 STD-860 SCREW, No. 10´•32 x 5/8 fill. hd. 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 66

STD-860 SCREW, No. 10-32 x 5/8 fill. hd. 8 8 8 8 8

9 STD´•670 NUT. No. 10-32 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

STD´•670 NUT, No. 10-32 8 8 8 8 8

10 73136 BRACKET, 900 1 1 1

73136 BRACKET, 900 2 2 2 2 2 2 2 2 2 2 2 2 2 2

11 176735 BRACKET, 900 111

6-11

L i ~C i i~:I LYCOllljnS 14 AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

I---~

78910

r´•’

c--~-+.O I~j 1

1.2

4

r’:i._3"

i. _C´•-´•~

iiC.! ,j’´•1

IAIO´•3601.3 2 2

6,7,8,9 .7.8.9

6,7,8,9

1.3 1!L.1

-i-r- 3

57,8,9,1

3 ’1

7,8,9;11J j ~--6,7,8.9

Figure 39. FUEL LINES AND ATTACHING PARTS

6-12

10, AIO-360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport PlantOIL SUMP AND INDUCTION SYSTEM

FUEL HOSES AND ATTACHING PARTS (10-360)


FIG. N 10´•360 AIO-360




1 LW-13192-45-334* HOSE ASSY., Fuel inj to fuel

manifold 1/2 inches 1 1 1 1 1

2 LW-12784-4-102 HOSE ASSY., Fuel in] to fuel

manifold (u 10-1/4 inches 1 1 1 11

3 LW-12784-4-202 HOSE, Fuel in] to fuel manifold

1/4 inches 1 1 1

LW-12784-4-340 HOSE ASSY., Fuel inj to fuel

manifold inches 1

LW-12784-4-172 HOSE, Fuel in] to fuel manifold

17-1/4 inches 1 1 1 1 1 1 1 1 1 1

LW-12798-4S-172* x HOSE, Fuel in] to fuel manifold

17-1/4 inches 1 1

4 AN837-4 ELBOW, 1/4 flared tube 450 1 1 1 1 1

5 AN924-4 NUT, Flared tube 1 1 1 1 1

6 72815 BRACKET, 900 twist 1 1 1 1

7 LW-1 6266-25´•50 CLAMP 1 1 1 1

8 STD-860 SCREW, No. 10-32 x 5/8 fill, hd. 1 1 1 1

9 STD-425 WASHER, No. 10 n 1 1 1 1

10 ISTD-670 NUT, No. 10-32 1 1 1 1

11 177287 TUBE ASSY., Fuel to ini 1

12 LW-12799-6S-144* HOSE ASSY., Fuel to ini

14-1/2 inches 1

LW-12799-6S-254* HOSE, Fuel to ini

1/2 inches 1 1

LW-13181-6-254 HOSE, Fuel to ini

1/2 inches 1 1 1 1 1 1 1 1 1 1

LW-13181-6´•303 HOSE, Fuel to ini

inches 1 1

LW-12877-68-161+ HOSE ASSY., Fuel to ini

16´•1/8 inches 1 1 1 1 1

13 LW-1 6266-1 0-75 CLAMP 1 1

14 1 LW-16266-25-63 CLAM P 1 1 1 1 1 1 1 1 1 1

15 73152 BRACKET, 1 1 1 1 1 1 1 1 1 1

16 ISTD-860 SCREW, No. 10-32 x 5/8 ,fill. hd. 1 1 1 1 1 1 1 1 1 1

17 ISTD-425 WASHER, No. 10 1 1 1 1 1 1 1 1 1 1

18 ISTD-670 NUT, No. 10-32 1 1 1 1 1 1 1 1 1 1

Rubber hose with fireproof sleeve.

Teflon hose with fireproof sleeve.

Teflon hose with fireproof sleeve and 900 elbow fitting.

6-13

L i 1~C i t~:l Lycoming 10, AIO´•360A, ´•B SERIES PARTS CATAU)G


Willjamsport Plant

2~13

cG/´•i~d/4 j.C

ii´•-C~ b

i:OB

j ii 4

ag 3

i: 1

1 ´•i$’~´•´•R

r\j

8,166.15~;(c5

i

u

9,173, C

7,13.141I I

ii!

c2i/ I:a.I;

ic-I :L

itw!

od

/n\ ,x

1,_i..J

Figure 40, FUEL HOSES AND ATTACHING PARTS (10-360)

6-14

LI~C i Lycoming 10, AIO´•360´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL HOSES AND ATTACHING PARTS (AIO-360)

QUANTITY PER ASSEMBLYFIG. N 10´•360

REF. PART A AA A, B

41 NUMBER DESCRIPTION LIAIA 1 B A A 1 A A B B 6 B B B 2 B A A B


1 LW´•13175´•4-252 HOSE ASSY., Fuel inj to fuel

manifold 1/4 inches 1 1

LW-12784-4-172 HOSE ASSY., Fuel in] to fuel

manifold (17-1/4 inches 1

2 73136 BRACKET, ,900 2 2

3 LW-16266-25´•50 CLAMP 2 2

4 STD-860 SCREW, No. 10´•32 x 5/8 fill. hd. 2 2

5 STD-425 WASHER, No. 10 n 2 2

6 STD-670 NUT, No. 10´•32 2 2

7 77841 TUBE ASSY., Fuel to ini 1 1

8 LW-12877-68´•142 HOSE, Fuel to ini

14-114 inches 1

9 LW´•16266-25-75 CLAMP 1

6-15

Lycoming 10, AIO´•360´•A,.B SEAIES PARTS CATALOGWilliamsport Plant

WIDE CYIINDER FLANGE CRANKCASE MODEL ENGINES

´•I

f>a´•,

1´•;

~1

I\

C ~jI1~´•/i

I ´•´•´•I

t?L/.

~J_´•:% .I

~5 "1Zti~iC) "k

2

1

r\c~

~--4

6 3,9

´•~3:

Figu~e 41. FUEL HOSES AND ATTACHING PARTS (AIO-360)

6-16

Lycoming 10, AIO-360´•A, ´•B SERIES PARTS CATALOG


Williamsport Plant

SERVICE KIT SECTION

SEAL AND GASKET SET

IO-360-A -B Series


75441-1 SEAL AND GASKET SET 1´•

AN901-8A GASKET 1

06319769-1.00 GASKET, Annular 1

STD-2217 SEAL, Oil 1

STD-213 SEAL, Oil 1

06319769-0.63 GASKET, Annular 1

06319769-1.25 GASKET. Annular 1

1691-C GA~KETI Fuel pump 2

8313 GASKET, Vacuum pump 1

60096 GASKET 1

LW-18639 LOCKPLATE, Crankshaft gear 1

LW-14260 SEAL, Tachometer drive 1

61173 GASKET, Oil pressure housing 1

61183 GASKET, Accessory adapter 1

62224 GASKET, Magneto 3

LW-18661 SEAL, Shroud tube 16

66224 GASKET, Carburetor 3

66732 GASKET, Valve rocker shaft cover 8

67193 GASKET, Rocker box cover 4

68129 GASKET 1

68315 GASKET, Accessory drive adapter 1

LW-13353 GASKET, Oil sump 1

69164 GASKET, Fuel pump adapter 1


71481 SEAL, Cylinder base 4

71973 GASKET 4

72053 GASKET, Governor 1

72075 SEAL, Oil 6

72078 LOCKPLATE, Camshaft gear 2

72091 RING, Oil seal 2

73032 GASKET, Injector elbow 1

73383 LOCKPLATE 2

75118 GASKET, Exhaust flange 8

73817 LOCKPLATE, Crankshaft idler gear shaft 2

73818 GASKET, Accessory housing 1

74068 RING, Oil level gage seal 1


76510 GASKET 1

LW-12795 GASKET 1

76940 SEAL, Crankshaft oil 1


LW-12681 GASKET 2

LW-13792 SEAL, Crankshaft oil 1

72059 GASKET 1

70455 GASKET 1

75906 GASKET 4

74065 RING, Oil level gage 1

72829 LOCKPLATE 1

7-1

C~CI rT´•l:l Lycoming 10, A10360´•A, -B SERIES PARTS CATALOG


Williamsport Plant

SERVICE KIT SECTION

SEAL AND GASKET SET

AIO-360-A, -B Series


LW-10964 SEAL AND GASKET SET 1

AN901-8A GASKET 1

LW-12272 LOCKPLATE 4

LW-12681 GASKET, Magneto 2

LW-12795 GASKET 1

LW-13353 GASKET 1



LW-18639 LOCKPLATE, Crankshaft gear 1

LW-18661 .SEAL, Shroud tube 16

MS16625-1081 RING 1

MS29512-10 SEAL, Oil, 3/32 dia. sect. x 3/4 I.D. 1

MS29512-12 SEAL, Oil, 7/64 dia. sect. x 59/64 I.D. 2

06319769-1.00 GASKET, 1.00 I.D. x 1-1/4 O.D. x 3/32 annular 2

06319769-0.63 GASKET, 7/8 O.D. x 5/8 I.D. x 3/32 annular 2

06319769-1.25 GASKET, 1-1/4 I.D. x 1-1/2 O.D. x 3/32 annular 1

S’rD-1221 RING 1

STD-2013 RING, Oil seal 2


60096 GASKET, Fuel pump 1



61503 SLEEVE, Shroud tube seal 8

62224 GASKET, Magneto adapter 1

LW-19296 GASKET 4

66224 GASKET, Fuel injector 1




69551 GASKET 1

70310 SEAL 8

70455 GASKET, 25/32 I.D. x 1-1/8 iO.D. x 1/16 thick 1

LW-111995 SPRING, Shroud tube 4


71973 GASKET, 2 bolt flange, 1-7/8 I.D. 4


72059 GASKET 1

72075 SEAL, Oil 4


73383 LOCKPLATE, 5/16 bolt x 1.00 spacing 1


74065 "0" RING 1

74068 "0" RING 1

74712 RING, Seal, 2-1/8 O.D. x 1/8 section 4


75906 GASKET 4

77055 GASKET, Crankcase cover, upper 1

77056 GASKET, Crankcase cover, lower 1

77569 SEAL 1

7-2

Lycsming 10, AIO´•360´•A, ´•B SEWIES PARPS CATALOGWIDE CYLINDER FLANGE CR6\NKCASE MODEL ENGIMES

Williamsport Plant

SERVI@E KIT SECTION

SEAL AND GASKET SET

IO-360-A1B6D,



MS16625-1081 RING, Internal retaining 1

MS16625-11.00 RING, Internal retaining 1

MS2957.2-10 SEAL 3

06319769-1.00 GASKET 1


06319769-0.6.3 GASKET 2

06319769-1.25 GASKET 1

8313 GASKET 1

60096 GASKET 1



66224 GASKET, Injector 1

66732 GASKET, Rocker shaft cover 8





71973 GASKET 4


72075 "0" RING 6


73383 LOCKPLATE 2


73818 GASKE’I‘, Accessory housing 1


77569 SEAL, mtake pipe 4

LW-12681 GASKET, Dual magneto 1

LW-10332 LOCKPLATE, Crankshaft 1


72059 GASKET 1

73032 GASKET i

74065 "0" RING 1

7-3

Lycoming 10, AIO-360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Williamsport Plant

SERVICE KIT SECTION

CYLINDER, PISTON AND RING KIT

IO-360-B Series


053~321104 CYLINDER, PISTON AND RING KIT 1

LW-12427 CYLINDER HEAD ASSEMBLY 1

LW-19001 VALVE, Exhaust 1

73938 VALVE, Intake 1

LW-1P800 SPRING, Valve outer 2

LW-11795 SPRING, Valve inner 2

LW-10077 SEAT, Valve spring, upper, intake 1

LW-16475 SEAT, Valve spring, upper, exhaust 1

60009 KEY, Valve, intake 2

17C21191 KEY, Valve, exhaust 2

17C19386 CAP, Valve stem, exhaust 1

75089 PISTON 1

74241 RING, Piston, compression 2

73857 R‘ING, Piston, oil regulating 1

LW-´•111077 PIN, Pistoxl 1

LW-1177fi PLIIG, Piston pin 2

60828 PLUG, Piston pin 2

71481 RING, Cylinder base seal 1


70310 SEAL, Shroud tube 2


SSP-2272 TAG 1

SSP-2472 TAG 1

SSP-672 TAG 1


7-4

Ly@oming 10, AIO´•368´•A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL EMGINES

Williamsport Plant

SERVICE KIT SECTION

CYLINDER, PISTON AND RING KIT

IO-360-A Series´• AIO-360-A -B Seriest


05K21120 CYLINDER, PISTON AND RING KIT 1

LW-12993 CYLINDER HEAD ASSEMBLY 1


LW-13622 VALVE, Intake 1

LW-11796 SPRING, Valve outer 2


69532 SEAT, Valve spring, upper, intake 1


LW-13322 SEAT, Valve spring, lower intake exhaust 2

71481 RING, Cylinder base seal 1


17C21191 KEY, Valve, exhaust 2

62388 CAP, Valve stem, intake 1

17C19386 CAP, Valve stem, exhaust 1

LW-10207-S PISTON 1


73857 RING, Piston, oil regulating 1

LW-14077 PIN, Piston 1


LW-11775 PLUG, Piston pin 2




SSP-2272 TAG 1

7-5

Lycoming 1O, AIO-360-A, ´•B SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SERVICE KIT SECTION

CRANKCASE ASSY. AND THRU STUD KITS


llB20061-1DLrS c~RANKCASE ASSY. AND THRU STUD KIT 1

llB20061-1DL" CRANKCASE ASSEMBLY 1

76220 THRU STUD 4

74887 SPACER 2

STD-2090 NUT 2

1102 PLUG, 1/8 pipe 6

STD-1339 PLUG, 1/16 pipe (piston squirts) 4

SSP-582 TAG 1

SSP-272 TAG 1

llB20061-1SH-S CRANKCASE ASSY. AND THRU STUD KIT 1

llB20061-1SH" CRANKCASE ASSEMBLY 1

76220 THRU STUD 4

74887 SPACER 2

STD-2090 NUT 2

1102 PLUG, 1/8 pipe 6

STD-1339 PLUG, 1/16 pipe 4

SSP-582 TAG 1

SSP-272 TAG 1

llB20061-1SGS CRANKCASE ASSY. AND THRU STUD KIT 1

llB20061-1SL" CRANKCASE ASSEMBLY 1

76220 THRU STUD 4

74887 SPACER 2

STD-2090 NUT 2

1102 PLUG, 1/8 pipe 6

STD-1339 PLUG, 1/16 pipe (piston squirts) 4

SSP-582 TAG 1

SSP-272 TAG 1

LW-18389-S CRANKCASE, GOV. STUD, THRU STUD KIT 1

LW-18389" CRANKCASE ASSEMBLY 1

31C-14 STUD (AN Governor) 4

31C-16 STUD (Woodward Governor) 4

STD-1339 PLUG 4

76220 THRU STUD 4

74887 SPACER 2

STD-2090 NUT 2

AN565B1032-H4 SET SCREW, 10-32 x 1/4 long 1


SSP-1576 TAG 1

LW-18399-S CRANKCASE ASSY. AND THRU STUD KZT 1

LW-18399-1* CRANKCASE ASSEMBLY 1

31C-14 STUD (AN Governor) 4

76220 THRU STUD 4

74887 SPACER 2

AN565B1032´•H4 SET SCREW, 10-32 x 1/4 long 1


STD-2090 NUT 2

SSP-1769 TAG 1

SSP-1576 TAG 1

SSP-582 TAG 1

See Figure 1, Page 1-1 for component parts.


lo´• nlO-sso-A. -B SERIES PARTS CATALOG


/MIMERICALINDEXINUMERICAL INDEX

PART NO. PART NAME PAGE NO. PART NO. PART NAME PAGE NO.

AN3 10-7 Nut 5-3 LW-25.1.13 Bolt 6-1

AN365-420C Nut 6-1 LW-25-1.13 Bolt 6-3

AN38l -4-22 Pin 2-7 LW-25-1.25 Bolt 2-13

AN50OA41 6-10 Screw 6-9 LW-25-1.25 Bolt 2-17

AN565B 1032115 Set Screw 2-3 LW-25-1.25 Bolt 6-1

AN6-14 Bolt 5-1 LW-25-1.25 Bolt 6-5

AN6-16 Bolt 5-2 LW-25-1.50 Bolt 1-11

AN6-17 Bolt 5-1 LW-25-1.50 Bolt 1-13

AN6-32 Bolt 5-1 LW-25.150 Bolt 2-13

AN6-34A Bolt 1-11 LW-25-1.75 Bolt 1-11

AN6-34A Bolt 1-13 LW-25-1.75 Bolt 1-13

AN7-12 Bolt 5-3 LW-25-1.75 Bolt 5-7

AN7-14 Bolt 5-3 LW-25-2 .00 Bolt 1-11

AN777-8D Elbow 2-11 LW-25-2 .00 Bolt 5-7

AN791-2 Elbow 6-9 LW-25-2 .94 Bolt 2-7

AN8- 14A Bolt 1-9 LW-25S 1.50 Bolt 1-11

AN814-6L Plug 2-5 LW-25S 1.50 Bolt 1-13

AN814-1OL Plug 2-11 LW-25S 1.80 Bolt 1-13

AN815-10 Union 6-3 LW-25S2.97 Bolt 1-13

AN8 16-4 Nipple 6-9 LW-3 1-0.94 Bolt 2-5

AN837-4 Elbow 6-13 LW-31-O.94 Bolt 5-1

AN838- 12D Elbow 6-3 LW-3 1-0.94 Bolt 5-3

AN844- 1OD Elbow 2-11 LW-31-1.16 Bolt 5-7

AN901-8A Gasket 2-11 LW-31-1.69 Bolt 2-4

AN919-15 Reducer 2-11 LW-31-4.13 Bolt 6-3

AN924-4 Nut 6-13 LW-31HO.75 Bolt 5-1

AN924-12D Nut 6-3 LW-31HO.75 Bolt 5-3

AN932-2 Plug 6-9 LW-31HO.88 Bolt 1-9

AN932-5 Plug 2-11 LW-31H0.88 Bolt 5-1

AN960-61 6L Washer 1-11 LW-31H1.22 Bolt 2-4

AN960-61 6L Washer 1-13 LW-31H1.22 Bolt 5-3

LW-25-0.50 Bolt 6-9 LW-31H1.75 Bolt 2-13

LW-25-0.63 Screw 1-9 LW-31S1.16 Bolt 5-1

LW-25-0.75 Bolt 2-9 LW-31S1.28 Bolt 5-1

LW-25-O.81 Bolt 2-13 LW-1OO77 Seat 3-5

LW-25-0.94 Bolt 2-7 LW-1O2O7-S Piston 3-1

LW-25-0.94 Bolt 2-13 LW- 10286 Gear Assy. 1-9

LW-25-0.94 Bolt 6-1 LW-1O296 Gear Assy. 1-9

LW-25-0.94 Bolt 6-3 LW- 10298 Shaft 1-9

LW-25-1.13 Bolt 1-11 LW- 10299 Shaft 1-9

LW-25-1.13 Bolt 1-13 LW- 10305 Gear Assy. 2-15


to. AIO-360-A, -B SERIES PARTS CATALOG


NUMERICAL INDEX (Cont~


LW-10320 Sleeve 2-9 LW- 12545 Plug 6-1

LW- 10332 Lockplate 1-9 LW-12545 Plug 6-3

LW- 10341 Insert 2-1 LW- 12589 Insert 2-1

LW- 10342 Body 2-13 LW- 12596 Bolt 3-1

LW- 10481 Pipe 6-5 LW- 12681 Gasket 4-1

LW- 10483 Pipe 6-5 LW- 12681 Gasket 4-5

LW- 10484 Pipe 6-5 LW- 12681 Gasket 4-9

LW-10494 Tube Assy. 2-5 LW- 12681 Gasket 4-13

LW-10504 Support Assy. 1-7 LW-12688 Seat 3-3

LW- 10512 Pulley 5-5 LW- 12706 Adapter 4-1

LW-10572 Bolt 1-11 LW-12706 Adapter 4-5

LW- 10573 Bolt 1-11 LW-12706 Adapter 4-9

LW- 10574 Spacer 1-11 LW-12784-4-102 Hose Assy. 6-13

LW-10649 Housing Assy. 2-1 LW-12784-4- 172 Hose 6-13

LW-10729 Link 5-1 LW-12784-4-172 Hose Assy. 6-15

LW-10799 Spacer 2-19 LW-12784-4-202 Hose 6-13

LW-10826 Sump Assy. 6-1 LW-12784-4-340 Hose Assy. 6-13

LW-10884 Housing Assy. 2-1 LW- 12789 Tube Assy. 1-3

LW-10885 Housing Assy. 2-1 LW-12795 Gasket 2-9

LW-10970 Strut 5-3 LW-12798-4S-172 Hose 6-13

LW-11021 Bearing 1-3 LW-12799-6S-144 Hose Assy. 6-13

LW-11147 Bracket 5-3 LW-12799-6S-254 Hose 6-13

LW-11485 Tube 3-5 LW-12877-6S-142 Hose 6-15

LW-11635 Shield 5-3 LW-12877-6S-161 Hose Assy. 6-13

LW-11713 Spring 1-3 LW- 12892 Thrust Button 3-7

LW-11750-S Conn, Rod Assy. 3-1 LW-12903 Reducer 2-11

LW-11775 Plug 3-1 LW-12914 Gear Assy. 2-3

LW-11795 Spring 3-5 LW-12920 Tube Assy. 2-5

LW-11796 Spring 3-5 LW-12988 Cyl. Head Assy. 3-3

LW-11797 Spring 3-5 LW-12993 Cyl. Head Assy. 3-3

LW-11800 Spring 3-5 LW-13077 Spring 3-5

LW-11847 Tube Assy. 3-9 LW-13175-4-252 Hose Assy. 6-15

LW-11848 Fuel Injector 6-7 LW-13181-6-254 Hose 6-13

LW-11866 Spacer Nut 1-11 LW-13181-6-303 Hose 6-13

LW-11997 Seal 1-3 LW-13192-4S-334 Hose Assy. 6-13

LW-12098-0-140 Tube Assy. 6-11 LW-13209 Bearing 3-1

LW-12098-0-170 Tube Assy. 6-11 LW-13212 Bearing 3-1

LW-12098-0-210 Tube Assy. 6-11 LW-13238 Housing Assy. 2-1

LW-li186 Nut 3-1 LW-13322 Seat 3-5

LW-12272 Lockplate 3-5 LW-13323 Seat 3-5

LW-12347 Plate 2-3 LW-13353 Gasket 6-1


’o´• uo-~scm. -B SERIES PARTS CATALOG

WIDE CYLINDER FLANGE CRANKCASE MODELENGINES



LW-13365 Brace 5-1 LW-14637 Shim 5-3

LW-13389 Baffle Assy. 3-9 LW- 14649 Shim 5-3

LW-13521 Bearing 3-1 LW- 14650 Shim 5-3

LW-13522 Bearing 3-1 LW-14725 Gage Assy. 1-3

LW-13622 Valve 3-5 LW- 14733 Gage Assy. 1-3

LW-13641 Cushion 4-13 LW- 14758 Gage Assy. 1-3

LW-13643 Gear 4-13 LW- 14759 Gage Assy. 1-3

LW-13790 Shaft 3-7 LW- 14760 Gage Assy. 1-3

LW-13792 Seal 1-3 LW- 14763 Gage Assy. 1-3

LW-13793 Stud 1-1 LW- 14769 Gage Assy. 1-3

LW-13796 Shaft 1-9 LW- 14780 Gage Assy. 1-3

LW-13864 Sump Assy. 6-1 LW- 14820 Ring 1-5

LW-13884 Bearing 1-3 LW-14910 Coupling 4-5

LW-13896 Plug 2-3 LW- 14995 Spring 3-5

LW-1 3904 Kit 2-9 LW- 15403 Washer 5-5

LW-l 3923 Bushing 3-1 LW-15416 Adapter Assy. 4-5

LW-14021 Shaft 2-3 LW-15420 Housing Assy. 2-1

LW-14040 Gear Assy. 2-13 LW-15445 Camshaft Assy. 1-9

LW-14077 Pin 3-1 LW-15473 Fuel Pump 2-19

LW-14078 Pin 3-1 LW-15571 Starter 5-7

LW- 14089 Kit 2-9 LW- 15572 Starter 5-7

LW- 14 14 1 Bracket 5-3 LW- 15592-5-05 Clamp 3-9

LW-14142 Bracket 5-3 LW-15592-8-08 Clamp 2-7

LW-14228 Gear 4-5 LW-15592-8-28 Clamp 6-5

LW-14229 Bearing 4-5 LW-16047 Bearing 1-3

LW-14230 Cushion 4-5 LW- 16048 Bearing 3-1

LW- 14252 Housing Assy. 2-1 LW-16064 Support Assy. 1-7

LW-14260 Seal 2-13 LW-16143 Bearing 3-1

LW-14290 Sump Assy. 6-1 LW-16266-10-13 Clamp 6-11

LW-14304 Alternator 5-5 LW-16266- 10-75 Clamp 6-11

LW-14313 Alternator 5-5 LW-16266-10-75 Clamp 6-13






LW-14351 Alternator Assy. 5-5 LW-16266-25-75 Clamp 6-15

LW- 14367 Alternator Assy. 5-5 LW-16471 Support Assy. 1-7

LW-14371 Alternator Assy. 5-5 LW-16475 Seat 3-5

LW-14382 Fuel Injector 6-7 LW-16562 Nipple 2-19

LW-14576 Manifold Assy. 6-9 LW- 16711 Bearing 1-3

Revised November, 1995 83

rlrEtl~llycoming lo´•nlo-360A,-B SERIES PARTS CATALOG




LW-16740 Valve 3-5 MS 16625-1100 Ring 2-9

LW-18085 Spring 1-3 MS 16625-1125 Ring 5-3

LW-18109 Impeller 2-13 MS20822-4 Elbow 6-9

LW-18110 Impeller Assy. 2-13 MS20822-6 Elbow 2-5

LW-1 8265 Nozzle 6-7 MS20823-6D Elbow 3-3

LW-18347 Housing Assy. 2-1 MS20823-8 Elbow 2-11

LW-18389 Crankcase Assy. 1-1 MS29512-6 Seal 2-5

LW-18399-1 Crankcase Assy. 1-1 MS29512-10 Seal 2-11

LW-18476 Manifold Assy. 6-9 MS29512-10 Seal 6-3

LW-1 8639 Lockplate 1-9 MS295 12-12 Seal 1-3

LW-1 8661 Seal 3-5 MS295 12-12 Seal 6-3

LW-18667 Pin 1-9 MS35489-20X Grommet 3-9

LW-18840 Camshaft Assy. 1-9 MS 124703 Insert 2-1

LW-18843 Camshaft Assy. 1-9 STD-8 Washer 1-I1

LW-18854 Nozzle Assy. 6-7 STD-8 Washer 1-13

LW-18885 Alternator 5-6 STD-8 Washer 2-7

LW-18888 Alternator 5-5 STD-8 Washer 2-9

LW-18900 Alternator Assy. 5-6 STD-8 Washer 2-13

LW-18904 Alternator Assy. 5-5 STD-8 Washer 2-15

LW-19001 Valve 3-5 STD-8 Washer 2-17

LW-19227 Counterweight Assy. 1-5 STD-8 Washer 5-7

LW-19238 Shaft 5-3 STD-8 Washer 6-1

LW-19265 Pulley Shaft Assy. 5-3 STD-8 Washer 6-3

LW-19296 Gasket 3-7 STD-8 Washer 6-5

LW-19332-S Conn. Rod Assy. 3-1 STD-19 Dowel 2-3

LW-52305-1 Kit Assy. 4-1 STD-33 Washer 1-11

LW-52305-1 Kit Assy. 4-5 STD-33 Washer 1-13

LW-157208 Kit, Magneto, Retard 4-1 STD-33 Washer 2-19

LW-157209 Kit. Magneto, Ground 4-1 STD-35 Washer 2-3

LW-349285-7 Magneto 4-1 STD-35 Washer 2-5









LW-349365-9 Magneto 4-9 STD-68 Pin 5-1

LW-382698 Kit 4-13 STD-82 Screw 6-9

LW-682555-11 Magneto 4-13 STD-91 Plug 6-1


lo´• nlo-3so-A. -B SERIES PARTS CATALOG




STD-148 Nipple 6-9 STD-1 60 Washer 6-5

STD-160 Washer 1-11 STD-160 Washer 6-9

STD-1 60 Washer 1-13‘ STD-213 Seal 2-19

STD- 160 Washer 2-7 STD-251 Washer 3-9


STD- 160 Washer 2-13 STD-425 Washer 1-3






STD-1 60 Washer 6-3 STD-475 Washer 2-19



STD-213 Seal 2-19 STD-475 Washer 4-5






STD-475 Washer 2-3 STD-514 Dowel 1-1


STD-475 Washer 2-7 STD-551 Plug 6-1


STD-475 Washer 3-7 STD-596 Nut 1-11





STD-148 Nipple 6-9 STD-670 Nut 6-11

STD- 160 Washer 1-11 STD-670 Nut 6-13




STD-160 Washer 2-13 STD-684 Nipple 3-9



STD-160 Washer 3-7 STD-692 Screw 3-9


STD-160 Washer 6-1 STD-713 Cotter Pin 4-1

STD- 160 Washer 6-3 STD-713 Cotter Pin 4-5


to. Alo-seo-n,-B SERIES PARTS CATALOG


NCTMERICAL INDEX (Cont~


STD-713 Cotter Pin 4-9 STD-1411 Nut 1-13



STD-761 Cotter Pin 5-3 STD-1L1´•11 Nut 2-17

STD-783 Plug 2-5 STD-1411 Nut 3-5

STD-784 Plug 2-1 STD-1411 Nut 3-7

STD-784 Plug 2-11 STD-1411 Nut 6-1

STD-798 Dowel 2-3 STD-1411 Nut 6-3

STD-860 Screw 6-11 STD-1420 Nut 2-13

STD-860 Screw 6-13 STD-1420 Nut 5-1

STD-860 Screw 6-15 STD-1576 Hose 2-7

STD-872 Nut 1-11 STD-1623 Insert 1-1

STD-872 Nut 1-13 STD-1686 Screw 3-9

STD-872 Nut 5-1 STD- 1727 Washer 4-1

STD-872 Nut 5-2 STD- 1727 Washer 4-5

STD-938 Dowel 2-17 STD- 1727 Washer 4-9

STD- 1065 Dowel 1-5 STD- 1727 Washer 5-1

STD-1164 Insert 2-3 STD-1727 Washer 5-3

STD-1164 Insert 6-3 STD-1763 Locknut 6-7

STD-1173 Insert 2-7 STD-1774 Pin 2-3

STD-1211 Plug 1-5 STD- 1774 Pin 2-15

STD-1221 Ring 2-3 STD- 1774 Pin 2-17

STD-1339 Plug 1-1 STD- 1774 Pin 2-19

STD-1339 Plug 2-13 STD-1 821 Hose 3-9

STD-1339 Plug 2-17 STD-1856 Screw 2-9

STD-1353 Insert 2-7 STD-1 872 Insert 3-3

STD-1353 Insert 6-3 STD-1 882 Screw 2-19

STD- 1409 Nut 1-11 STD-1 907 Screw 6-9

STD- 1409 Nut 1-13 STD-1908 Washer 6-9

STD-1410 Nut 2-3 STD-1 925 Screw 3-7

STD-1410 Nut 2-4 STD-1930 Hose 2-5

STD-1410 Nut 2-7 STD-2013 Ring 2-7

STD-1410 Nut 2-19 STD-2072 "O" Ring 2-17

STD-1410 Nut 3-7 STD-2078 Dowel 1-5

STD-1410 Nut 4-1 STD-2090 Nut 3-7

STD-1410 Nut 4-5 STD-2168 Nut 1-9

STD-1410 Nut 4-9 STD-21 80 Hose 3-9

STD-1410 Nut 4-13 STD-2213 Screw 1-9

STD-1410 Nut 5-7 STD-2217 Seal 2-17

STD-1410 Nut 6-7 STD-2221 Nut 5-3

STD-1411 Nut 1-11 STD-2231 Ring 1-9


lo´• nlo-36cm. -B SERIES PARTS CATALOG




25C-8 Stud 3-3 1102 Plug 2-1

25C-9 Stud 3-3 1102 Plug 2-3

25C-10 Stud 1-1 1102 Plug 2-17

25C-10 Stud 2-1 1102 Plug 3-3

25C-10 Stud 2-9 1102 Plug 6-1

25C-ll Stud 2-1 1102 Plug 6-3

25C-12 Stud 2-1 1102 Plug 6-5

25(31-12 Stud 2-17 1102 Plug 6-9

25C-16 Stud 2-17 1182-E7 Spark Plug 4-3

25C-20 Stud 2-1 1182-E7 Spark Plug 4-7

25C-22 Stud 2-1 1182-F7 Spark Plug 4-11

25C-29 Stud 2-17 1182-G7 Spark Plug 4-3

25CD-14 Stud 1-1 1182-57 Spark Plug 4-7

31C-12 Stud 1-1 1182-Q5 Spark Plug 4-7

31C-12 Stud 2-1 1540 Plug 2-11

31C-12 Stud 3-3 1691-C Gasket 2-19

31C-13 Stud 1-1 8313 Gasket 2-15

31C-13 Stud 2-1 60009 Key 3-5

31C-13 Stud 3-3 60096 Gasket 2-19

31C-14 Stud 1-1 60430 Cover 2-15

31C-14 Stud 2-3 60431 Cover 2-19

31C-14 Stud 6-1 60803 Strap 1-11

31C-14 Stud 6-3 60803 strap 1-13

31C-15 Stud 2-1 60828 Plug 3-1

31C-15 Stud 6-1 61084 Spring 1-3

31C-16 Stud 1-1 61098 Adapter Assy. 2-15

31C-16 Stud 2-1 61166 Thrust Button 2-13




31C-19 Stud 2-1 61173 Gasket 2-9

31C-25 Stud 6-1 61174 Shaft 2-13

31CD-17 Stud 2-1 61183 Gasket 2-1538-13 Stud 1-1 61183 Gasket 2-17

38-22 Stud 1-1 61247 Cover 3-7

38D-17 Stud 1-1 61260 Flange 3-750-15 Stud 1-1 61400 Stud 6-1

383-B Nut 3-7 61503 Sleeve 3-51028-B Ball 1-3 61510 Plug 1-5

1102 Plug 1-1 61544 Plunger 1-9

1102 Plug 1-5 61665 Gear 4-1


to. AlO-s60-A. -B SERIES PARTS CATALOG




66610 Bushing 3-3 69796 Dowel 1-1

66670 Bushing 3-3 69827 Gasket 2-17

66713 Guide 3-3 70310 Seal 3-5

66728 Washer 3-5 70348 Dual Drive Assy. 2-17

66732 Gasket 3-7 70419 Bracket 5-1

66796 Insert 3-3 70455 Gasket 2-3

67114 Bushing 3-7 70484 Screen 6-1

67193 Gasket 3-7 70484 Screen 6-3

67195 Flange 3-7 70485 Pipe 6-5

68315 Gasket 2-3 71023 Brace 2-17

68315 Gasket 2-7 71140 Fitting68317 Shaftgear 2-3 71266 Rocker Assy. 3-7

68403 Impeller 2-7 71481 Ring 3-7

68593 Spacer 2-15 71549 Washer 3-7

68668 Spring 1-3 71596 Washer 2-3

68759 Tube Assy. 3-9 71596 Washer 2-15

68760 Tube Assy. 3-9 71596 Washer 2-17

68761 Tube Assy. 3-9 71600 Adapter 2-11

68795 Cover Assy. 3-7 71610 Hook 3-9

68974 Housing 2-9 71611 Retainer 3-9

69106 Cover 2-3 71620 Bolt 2-11

69159 Adapter Assy. 2-19 71623 Washer 2-11

69164 Gasket 2-19 71712 Pipe 6-5

69260 Insert 3-3 71713 Pipe 6-5

69316 Gear 2-17 71903-A Bushing 1-5

69318 Shaft 2-17 71907 Washer 1-5

69319 Gear Assy. 2-17 71973 Gasket 6-5

69320 Capscrew 2-17 72050 Key 3-5

69436 Spring 2-11 72053 Gasket 2-3

69510 Housing 2-9 72057 Seat 3-3

69532 Seat 3-5 72058 Seat 3-3

69551 Gasket 2-3 72059 Gasket 1-3

69602 Connection 6-1 72060-S Bushing 1-5

69603 Hose 6-5 72061-S Bushing 1-5

69675 Connector 2-11 72062-S Bushing 1-5

69719 Cover Assy. 2-17 72074-S Bushing 1-5

69720 Gasket 2-17 72075 Seal 1-3

69725 Adapter Assy. 2-17 72091 Ring 1-3

69730 Gear Assy. 2-17 72158 Bushing 1-1

69731 Bushing 2-17 72230 Shaft 1-9

69737 Spacer 2-17 72231 Gear Assy. 1-9

s-s Revised November, 1995

’o´• A’O-360-A. -B SERIES PARTS CATALOG




72255 Shroud Tube Assy. 3-5 73772 Nozzle Assy. 1-1

72312 Ring 1-3 73810 Bushing 1-5

72343 Stabilizer 3-3 73818 Gasket 2-1

72344 Stabilizer 3-3 73937 Fuel Injector 6-7

72377 Elbow 2-19 73938 Valve 3-5

72378 Cover 2-3 73966 Spacer 6-9

72413 Fitting 2-11 74065 Ring 1-3

72566 Gear 1-7 74068 Ring 1-3

72626 Shaft 3-7 74070 Elbow 2-5

72702 Tube Assy. 3-9 74070 Elbow 2-19

72703 Tube Assy. 3-9 74139 Adapter Assy. 6-5

72710 Cover 3-7 74230 Guide 3-3

72797 Roller 1-5 74241 Ring 3-1

72815 Bracket 6-13 74248-S Bushing 1-5

72829 Lockplate 1-9 74249-S Bushing 1-5

72834 Cover 3-9 74309 Bearing 3-1

72877 Body 1-3 74319 Alternator 5-5

72897 Guide 3-3 74323 Strut 5-1

72970 Gear Assy. 2-15 74324 Bracket 5-1

73027 Tube Assy. 3-9 74325 Link 5-1

73136 Bracket 6-11 743 84 Sump Assy. 6-1

73136 Bracket 6-15 74389 Bushing 3-7

73152 Bracket 6-13 74390 Rocker Assy. 3-7

73161 Spacer 6-7 74494 Plate 3-7

73231 Gear Assy. 2-17 74524 Ring 1-3

73249 Washer 2-3 74556 Fuel Injector 6-7

73250 Washer 2-3 74597 Bracket 6-9

73251 Washer 2-3 74598 Bracket 6-9

73252 Washer 2-3 74637 Bushing 3-7

73346 Flange 6-5 74711 Plug 1-5

73383 Lockplate 5-1 74808 Tube Assy. 3-9

73383 Lockplate 5-3 74842 Spacer 6-7

73434 Rod Assy. 3-7 74863 Pulley 5-5

73437 Rod Assy. 3-7 74878 Fan Baffle Assy. 5-5

73455 Rod Assy. 3-7 74880 Alternator Assy. 5-5

73456 Rod Assy. 3-7 74887 Spacer 3-7

73458 Rod Assy. 3-7 74977 Support Assy. 1-7

73555 Rod Assy. 3-7 74996 Gear Assy. 1-9

73556 Rod Assy. 3-7 75009 Bracket 6-9

73557 Rod Assy. 3-7 75030 Support Assy. 1-7

73558 Rod Assy. 3-7 75060 Bolt 3-1


to. nlo-se~n. -B SERIES PARTS CATALOG

WIDE CYLINDER FLANGE CRANKCASE ´•MODEL ENGINES



75061 Bolt 3-1 76421 Pulley 5-6

75072 Gear Assy. 1-9 76504 Fuel Injector 6-7

75089 Piston 3-1 76510 Gasket 2-9

75118 Gasket 3-7 76529 Cap 1-3

75153 Adapter Assy. 2-3 76534 Shim 5-2

75154 Stud 1-1 76539 Seat 2-9

75165 Clip 2-5 76735 Bracket 6-11

75166 Tube Assy. 2-5 76768 Lockwasher 5-3

75167 Tube Assy. 2-5 76769 Locknut 5-3

75221 Support Assy. 1-7 76817 Fuel Injector 6-7

75279 Manifold Assy. 6-9 76906 Bracket 5-1

75280 Manifold Assy. 6-9 76908 Strut 5-1

75337 Baffle Assy. 3-9 76961 Clamp 4-1



75380 Link 5-1 77055 Gasket 6-3

75444 Adapter Assy. 6-5 77056 Gasket 6-3

75447 Nipple 6-9 77115 Tube Assy. 2-7

75545 Adapter Assy. 2-3 77116 Shaft Assy. 2-7

75730 Tube Assy. 2-5 77117 Spacer 6-3

75735 Tube 1-3 77118 Shaft 2-7

75736 Tube 1-3 77120 Fitting Assy. 1-3

75739 Nipple 2-5 77124 Housing Assy. 2-7

75767 Tube 1-3 77125 Adapter Assy. 2-7

75838 Guide 3-3 77126 Cr’kcase Cover Assy. 6-3

75888 Stud 2-1 77127 Housing Assy. 6-3

75906 Gasket 3-7 77128 Tube Assy. 2-7

75924 Shaftgear Assy. 2-19 77130 Tube Assy. 2-7

76028 Link 5-1 77131 Tube Assy. 2-7

76110 Housing Assy. 2-1 77132 Cr’kcase Cover Assy. 6-3

76111 Housing Assy. 2-1 77155 Fitting 2-7

76118 Spacer 1-9 77155 Fitting 6-3

76121 Shaft Assy. 1-9 77172 Pump Assy. 2-7

76141 Housing Assy. 2-1 77208 Manifold Assy. 6-9

76158 Pulley 5-5 77287 Tube Assy. 6-13

76165 Alternator Assy. 5-5 77309 Bushing 1-9

76220 Stud 1-11 77412 Housing Assy. 2-1

76220 Stud 1-13 77450-S Conn. Rod Assy. 3-1

76394 Bearing 3-1 77467 Spring 1-3

76420 Pulley 5-3 77547 Bracket 6-9

76421 Pulley 5-5 77569 Seal 6-5


lo´• AlO-3so-A. -B SERIES PARTS CATALOG


NU~ERICAL INDEX (Cont~


77579 Support Assy. 1-7 01P19762- 1-2 Bag Attaching 4-11

77620 Housing Assy. 2-1 01P19762-1-6 Bag Attaching 4-3

77718 Strut 5-1 01P19762-1-6 Bag Attaching 4-7

77752 Fuel Injector 6-7 01P19762-1-7 Bag Attaching 4-3

77808 Valve Assy. 1-3 01P19762-1-7 Bag Attaching 4-11

77841 Tube Assy. 6-15 01P19762- 1-43 Bag Attaching 4-3

77852 Oil Filter Base Assy. 2-9 01P19762-1-43 Bag Attaching 4-7

77´•872 Bushing 2-3 01P19762-2-5 Bag Attaching 4-3

77874 Gear Assy. 2-3 01P19762-2-5 Bag Attaching 4-7

77875 Gear 2-3 01P19762-2-5 Bag Attaching 4-11

77962 Adapter 1-3 01P19762-2-7 Bag Attaching 4-3

77997 Housing Assy. 2-1 01P19762-2-7 Bag Attaching 4-7

78290 Plunger Assy. 3-5 01P19762-2-7 Bag Attaching 4-11

78308 Alternator 5-5 01P19762-2-9 Bag Attaching 4-3

78524 Socket 3-5 01P19762-2-9 Bag Attaching 4-11

78528 Body Assy. 2-13 01P19762-2-12 Bag Attaching 4-3

78531 Body 2-13 01P19762-2-12 Bag Attaching 4-7

78594 Adapter Assy. 2-3 01P19762-2-12 Bag Attaching 4-11

78621 Pipe 6-5 01P21501-3-30 Bag Attaching 4-14



78624 Pipe 6-5 06A1 9956 Oil Seal 2-15

78626 Tube Assy. 1-3 06E 19769-0.63 Gasket 2-9

78629 Ball Bearing 5-3 06E19769-0.63 Gasket 2-11

78714 Bracket 6-9 06E1 9769-1 .00 Gasket 6-1

78741 Pipe 6-5 06E1 9769-1 .00 Gasket 6-3

78742 Pipe 6-5 06E 19769-1.25 Gasket 1-3

78743 Pipe 6-5 07A 19474 Bracket 5-1

78744 Pipe 6-5 11B20061-1DL Crankcase Assy. 1-1

78778 Sump Assy. 6-1 1 1B 20061-1SH Crankcase Assy. 1-1

78805 Manifold Assy. 6-9 1 1B2006 1 1 SL Crankcase Assy. 1-1

78914 Connection 6-1 13B17131 Crk’shft Bush. Assy. 1-5

78993 Fuel Pump 2-19 13B 17132 Crk’shft Bush. Assy. 1-5

79002 Pipe 6-5 13B17160 Crk’shft Plug Assy. 1-5

951391 "0" Ring 6-7 13B17161 Crk’shft Plug Assy. 1-5

01L21158 Shim 5-7 13B17162 Crk’shft Plug Assy. 1-5

’01L21159 Shim 5-7 13B17166 Crk’shft Plug Assy. 1-5

01P19762-1-1 Bag Attaching 4-3 13B17167 Crk’shft Plug Assy. 1-5



01P19762-1-2 Bag Attaching 4-3 13B 17248 Crk’shft Plug Assy. 1-5


to. AIO-360-A. -B SERIES PARTS CATALOG




13B 17249 Crk’shft Plug Assy. 1-5 66A21766 Magneto 4-1

13B 17256 Crk’shft Plug Assy. 1-5 66B21772 Magneto 4-1

13B17273 Crk’shft C’wt. Assy. 1-5 66B21772 Magneto 4-5



13B 17283 Crk’shft C’wt. Assy. 1-5 66B21778 Magneto 4-5

13819646 Gear 1-9 66B21779 Magneto 4-1

13819649 Gear 1-9 66B21779 Magneto 4-5

14W21696 Roller 1-5 66B21561 Mag. Ign. System 4-13

14H21950 Ring 3-1 66B21563 Mag. Ign. System 4-13

15F19957-35 Rod Assy. 3-7 66GC 15SFNN Magneto 4-1

15F19957-36 Rod Assy. 3-7 66GC 15SFNN Magneto 4-9

15F19957-57 Rod Assy. 3-7 66GC25SFNN Magneto 4-1

16T19468 Seat 3-3 66GC25SFNN Magneto 4-5

17C19386 Cap 3-5 66GC25SFNN Magneto 4-9

17C21191 Key 3-5 66GP-OSAEN Magneto 4-1

17F19353 Rocker Assy. 3-7 66GP-OSAEN Magneto 4-5

18A19441 Bearing 1-3 66GP-OSANN Magneto 4-1

181)19394 Bearing 1-3 66GP-OSANN Magneto 4-5

18N19391 Bearing 3-1 66GP-OSANN Magneto 4-9

31A21198 Starter Assy. 5-7 66GR15SANN Magneto 4-1

31B21064 Starter Assy. 5-7 66GR15SANN Magneto 4-9

31D21088 Housing Assy. 5-7 66GR25SANN Magneto 4-1

31E21143 Motor 66GR25SANN Magneto 4-5

Solenoid Assy. 5-7 66M 19385 Clamp 4-1

31B21199 Motor 66M 19385 Clamp 4-5

Solenoid Assy. 5-7 66M 19385 Clamp 4-9

32B 19549 Alternator Assy. 5-5 66M 19385 Clamp 4-13

32B 19555 Alternator Assy. 5-5 67821450 Harness 4-14

32C 19551 Alternator Assy. 5-5 67H21452 Harness 4-14

32C 19553 Alternator Assy. 5-5 671121456 Harness 4-14

36B 19484 Pulley 5-5 67L20422 Harness 4-3

36B 19484 Pulley 5-6 67L20422 Harness 4-7

37A 19773-367 Belt 5-6 67L20422 Harness 4-11

37A 19773-376 Belt 5-6 67L20423 Harness 4-3

37A 19773M396 Belt 5-6 67L20423 Harness 4-7

53E19600 Valve Assy. 2-9 67L20423 Harness 4-11

54D 19625 Oil Filter 2-9 67P20400 Harness 4-3

54D 19627 Oil Filter 2-9 67P20400 Harness 4-7

55(321021 Spring 2-9 67P20400 Harness 4-11

66A2 1765 Magneto 4-5 67P20401 Harness 4-3


lo´•Alo-3soa.-B SERIES PARTS CATALOG



PART NO. PART NAME PAGE NO.

67P20401 Harness 4-7



67P20402 Harness 4-11



67P20403 Harness 4-11


67P20405 Harness 4-11

67P20412 Harness 4-367P20412 Harness 4-7

67P20412 Harness 4-11



67P20413 Harness 4-11


67P20414 Harness 4-11


67P20415 Harness 4-11



67P20416 Harness 4-11



67P20417 Harness 4-11



67P20418 Harness 4-11



67P20419 Harness 4-11



67P20428 Harness 4-11



67P20429 Harness 4-11

68C 19622 Gear 4-1

68C19622 Gear 4-5

68C19622 Gear 4-9


IVI FG.

INTRO

P~ARTS

PC 406-2

AVCO LVCOI\IIING

10/ LIO-360-C, -J, HIO, ~10, ~Ac10-360 SERI´•-S

PARTS CATALOG

\Nide cylinder Flange Models

PRICE ~18.00 APRIL 1983

~AVCO LYCOMING WILLIAMSPORT DIVISION

652 Oliver Street, Williamsport. Pennsylvania 17701

Lj~AVCO LYCOMING ENGINE GROUP

TO: PARTS MANAGER

THIS PARTS CATALOG PC-406-2 PLUS PARTS CATALOG PC-406-1,

REPLACES PARTS CATALOG PC-a06 FOR 10-360 WIDE CYLINDER

FLANGE MODELS ONLY, (THOSE MODELS WITH ENGINE SERIAL

NUMBERS ENDING IN´•THE SUFFIX -51A), PLEASE RETAIN

PARTS CATALOG PC-206 FOR PARTS COVERAGE ON 10-360

NARROW CYLINDER FLANGE MODELS (THOSE MODELS ENDING IN

SUFFIX -51).

PLEASE REMOVE ALL SUPPLEMENTS’TO PARTS CATALOG PC-206,

AND DESTROY. THOSE 10-360 ENGINE MODELS COVERED IN

SUPPLEMENTS TO PC-206 ARE NOW COVERED IN PC-406-1 AND

PC-406-2.

JCII’~ iY ´•’97 W4:5iPl’l TXT L’r’CO CT’LIST SER’~,’ F’. 1~´•.’3

652 Oliver Street

Textr6n Lycdming/Subsidiary of Textron Itlc. Wi~lian?spdrt,PA 17701 U.S.A.717/3~3-6181

TECHNICAL


REVISION No. ENGINE MODEL 1 PUBLICATION No. PUBLICATION DATE10/LIO-360-C, -cl, HIO,

P~408-2-B TIG. AEIO-360 Series PC406-2 I April, 1983

The page(a) fLlrniehed herewith are intended t6 replace the corr~spanding´•

gagefs) of the publication indicated above.

Remove I Insert

April, 1983 March, 1’384

Page 3-5 Pa~e 3-5

6SS~g,sdALA,- I-:c-,7i~ied By

rs4 AT"p

06/19/97 12:56 TX/RX N0.0613 P.001

~AVCO LYCONIING VVILLIANISPORT DIVl~jlON

652 Oliver Street, Williamsport, Pennsylvania 17701

~AVCO LYCOMING ENGINE GROUP

TECHNICAL


REVISION No. ENGINE MODEL I PUBLICATION No. PUBLICATION DATE

PC406-2-A IO/LIO-360-C, -J, HIO,TIG, AEIO-360 Series PC406-2 I ADril, 1983

The page(s) furnished herewith are intended to replace the corresponding


Remove I Insert

April, 1983 November, 1984

Page 3-3 1 Page 3-3

INTRODUCTIOM

This illustrated parts catalog contains a complete parts listing for the Avco Lycoming IO, LIO, HIO, TIG,AEIO,-360 series wide cylinder flange crankcase model engines.

Major assembly and sub-assembly parts of the engines are listed in the Group Assembly sections in the

general sequence of engine build up.


during overhaul.

The Numerical Index is provided for convenience in finding parts when only the part number is known.

Parts coverage of Vendor accessories used on Avco Lycoming engines may be found in the appropriate Ven-

dor’s Parts Catalog. A list of these publications appear in the latest edition of Service Letter No. L114.

NOTE

The illustrations, pictures and drai~ings shown in this publication are typical of the subject matter they por-

tray; in no instance are they to be interpreted as examples of any specific engine, equipment or part thereof.


Although the information contained in this parts catalog is up-to-date at time of publication, users are urged to

keep abreast of later information through all Avco Lycoming distributors or from the factory by subscription.Consult the latest edition of Service Letter No. L114 for subscription information.

IO, LIO, HIO, TIG, AEIO-360 SERIES

TABLE OF CONTENTS

SECTION PAGE

Introduction........._

Table of Contents

Oversize and Undersize Parts List ..iv

i. CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUP

Crankcase AssemblyOil Level Gages and Crankcase Related Parts 1-3

Crankshaft, Camshaftand Related Parts........._

...1-5

Crankshaft IdlerGears andTachometerDrive........._

1-8

PropellerGovernor Drive Assembly (Crankcase) ........1-10

Crankcase Attaching Parts 1-12


Accessory Housing Assembly .....2-1

Propeller Governor Drives, Covers, Oil Lines and AdapterAssembly ........._2-3

Propeller Governor and Turbo Scavenge Pump (TIO-360)........._.__._

..2-5

Oil Pump Assembly and Accessory HousingAttaching Parts 2-7

Oil Filter AssemblyOil Cooler and Breather Fittings ...............2-11

Vacuum Pump .2-13

Fuel Pump and Fuel Pump Covers 2-15


Cylinder AssemblyConnecting Rod, Piston and Ring Assemblies ........._3-3

Valve AssemblyCylinder Related Parts...

Cylinder Head Drain Tubes and Intercylinder CoolingBaffles 3-10

4. IGNITION SYSTEM

Magneto Drives andMagnetos .4-1

Magneto Drivesand Magnetos........._

........._.4-3

Magneto Drives and Magnetos (Dual Magnetos) .........4-5

Magneto Drives and Magnetos .......4-7

Ignition Harness and Spark Plugs (TIO-360) ............4-9

Ignition Harness and Spark Plugs 4-11

Ignition Harness (Scintilla) and Spark Plugs ...........4-13

5. ELECTRICAL.SYSTEM

Alternator and Generator MountingBrackets ...........5-1

Alternators, Generators, Regulatorsand DriveBelts........._.__._

.....5-3

Starting Motor and Magnetic Switch.........___

5-5

TABLE OF CONTENTS (Cont.)

SECTION PAGE

6. OIL SUMP AND INDUCTION SYSTEM

Oil Sump Assembly and Oil Suction Screen 6.1

Intake PipesFuel Injectors, Fuel Manifolds and Injection Nozzles 6.5Fuel Injectors, Fuel Manifolds and Injection Nozzles

........._6.7

Fuel I,ines, Fuel Hoses and Attaching Parts 6~9

Fuel Lines, Fuel Hoses and Attaching Parts 6.10Fuel Lines, Fuel Hoses and Attaching Parts 6-12

Injector Nozzle and Attaching Parts 6-13

7.’rURBOCHARCER AND EXHAUST SYSTEMS

Exhaust Manifold and Transition Assembly 7.1

Turbocharger and Attaching Parts 7-3

Turbocharger Attaching Parts 7-5

Turbocharger Attaching Parts........._._._._ 7-7

Turbocharger Attaching Parts 7~9

Turbocharger Attaching Pgrts 7-11

8. SEHVICE KIT SECTION........._

9. NUMEF1ICAI, INDEX..........

10, LIO, HIO, TIG, AEIO-360 SERIES



W2 P05 P10 P15 P20 P30 P50 M03 M06 M10

60028 GUIDE, Intake valve X X X X

66610 BUSHING, Rocker shaft X X

66670 BUSHING, Rocker shaft X X

66713 GUIDE, Intake valve X X X X

66796 INSERT, Spark plug X

69260 INSERT, Spark plug X

71894 SEAT, Exhaust valve X X X

71903 BUSHING, Counterweight SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1143 FOR APPLICATION.

72057 SEAT, Intake valve X X X

72058 SEAT, Exhaust valve X X X

72060 BUSHING, Prop. flange X X X X



72074 BUSHING, Prop. flange X X X

72212 SEAT, Intake valve X X X

72897 GUIDE, Exhaust valve X X X X

73810 BUSHING, Crankshaft SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1142 FOR APPLICATION.

73857 RING, Piston X X


74241 RING, Piston X




LW-10647 DOWEL, Crankshaft bearing X X

LW-11021 BEARING, Crankshaft X X X

LW-12688 SEAT, Intake valve X X X

LW-13521 BEARING, Connecting rod X* X’ X*

LW-13792 SEAL, Crankshaft X

LW-1 3884 BEARING, Crankshaft X X X

LW-1 3885 BEARING, Crankshaft X X X

LW-15628 SEAL, Crankshaft X

STD-1065 DOWEL, Crankshaft X X X X

STD-2078 DOWEL, Crankshaft X X X X

Studs available in P03, P07 and P12.

Also available in P-10 oversize.

NOTE

When ordering oversize or undersize parts, be sure to specify the required oversize or undersize dimension along with the proper

part number. For example: to order bearing LW-13521 in .003 undersize, order part number LW-13521-M3. Oversize code letter is

’’P’’ while undersize code letter is ’’M’’. These letters are then followed by the numbers designating the size in thousandths of an

inch.

LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CRANKCASE ASSEMBLY

OUANTITV PER ASSEMBLY

FIG. N LIO-360 TIG-380

IF PART 10-380 HIO-380 AEIO-380

DESCRIPTIONNUMBER C C C C C C C J C A B C C 0 6 6 F A A B H

L111111111111111111111ABCCDEFAEAAABAABABEGA

1 L 666 66 DDD 6

1 LW-13819 CRANKCASE ASSEMBLY 1 1

LW-13809 CRANKCASE ASSEMBLY 1

LW-13818 CRANKCASE ASSEMBLY 1 1 1 1 1 1

LW-13811 CRANKCASE ASSEMBLY 1 1




LW-13822 CRANKCASE ASSEMBLY 1 1 1



LW-13680 CRANKCASE ASSEMBLY 1 1



2 75154 STUD, 1/2-13 x 10-1/32 long 2

3 50-15 STUD, 1/2-20 x 1-7/8 long 8

4 38-13 STUD, 3/8-16 x 1-5/8 long 6

5 38[3-17 STUD, 3/8-16 x 2-1/8 long, drilled 1

6 LW-13793 STUD, 5/16-18 x 15/16 long, dr. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

7 3100-12 STUD, 5/16-18 x 1-1/2 long, drilled 1 1 1

8 31C-12 STUD, 5/16-18 x 1-1/2 long 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

9 310-13 STUD, 5/16-18 x 1-5/8 long 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10 310-14 STUD, 5/16-18 x 1-5/8 long 1 1 1

11 310-24 STUD, 5/16-18 x 3.00 long 2

12 1310-35 STUD, 5/16-18 x 4-3/8 long 1

13 38-22 STUD, 3/8-16 x 2-3/4 long 1 1 1 1 1

14 ISTD-557 DOWEL, 1/2 dia. x 19/32 long, hollow 1 2

15 72158 BUSHING, Gov. drive idler shaft 1 1 1 1

16 ISTD-514 DOWEL, 5/16 dia. x 1/2 long 2

17 69796 DOWEL, Crankshaft bearing 2

18 LW-10647 DOWEL, Crankshaft bearing 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

19 1102 PLUG, 1/8-27 NPT, Alien 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 5 5

1102 PLUG, 1/8-27 NPT, Alien 4 4 4 4

20 STD-1623 INSERT, 1/4-20 Heli-coil x 3/8 long 2

21 65007 RETAINER, Shroud tube seal 8

22 STD-1339 PLUG, 1/16-27 NPT, Alien 1 1 1 1 1

23 310-14 STUD, 5/16-18 x 1-3/4 ;pmg 4 4 4 4

31C-16 STUD, 5/16-18 x 1-3/4 long 4

24 73772 NOZZLE ASSEMBLY, Piston cooling 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

25 1102 PLUG, 1/8-27 NPT, Alien 1 1

1-1

c2336

"\j O

/cli i

~I!C. ra

r

i\ CI-i’s O

197. "~9\ i ~I

a4i ZQ 17

i gl~Ls-ll G-)

IF. iid C) 18

B 25--\ /19 O

ZA6 6~1,1

Is

’iF r

I~

/-14it/c,

Ic; a:

o

ii IC!aCi

j I I i

v,

m 00

ea i,,i

r

Om’C-d [5~3 5; O

,i~?´•-n Q)

c~~-24 n

V1mm

22\\ L, cn3Dli~i .1 3~ m3zi

i

Q aQol‘I3P

P

"i c-rjcn

rp

Dz

/c/ i z 5;

~AVCO LYCOMING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


OIL LEVEL GAGES AND CRANKCASE RELATED PARTS

QUANTITY PER ASSEMBLYO

FIG N LIO-360 TIG-380

PART 10-380 HIO-360 AEIO-360DESCRIPTION

NUMBER AC C C C C C C J CA B C C O E E F A A B H

Llllllflllllllllllll11ABCCDEFAEAAABAABABEGA2 L 666 66 DDD 6

1 77962 ADAPTER, Oil level gage 1 1

2 75767 TUBE, Oil level gage, intermediate 1 1 1 1 1 1 1

75736 TUBE, Oil level gage. long 1 1 1 1 1 1 1 111

75735 TUBE, Oil level gage 1

78626 TUBE ASSY., Oil level gage, long 1

3 72059 GASKET, Oil level gage 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4 74065 RING, Oil level gage seal 1 1 1 1 1 1 1

74068 RING, Oil level gage seal 1 1 1 1 1 1 1 1 1 1 11

72312 RING, Oil seal 1 1


LW-14758 GAGE ASSY., Oil level 1

LW-14760 GAGE ASSY., Oil level 1 1 1 1 1 1 1 1 1

75257 GAGE ASSY., Oil level 1 1

LW-14769 GAGE ASSY., Oil level, inter. 1 1 1 1





LW-14765 GAGE ASSY., Oil level



6 1028-8 BALL, 11/16 dia. 1

7 61084 SPRING, Oil pressure relief valve 1

8 STD-425 WASHER, Na. 10 plain (Max. 9) uniun un un unlunlunlun un run

9 STD-1045 GASKET, 1-1/4 ID x 1-1/2 OD x 3/32

annular 1

10 177808 VALVE ASSY., Oil pressure relief, adj. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

11 LW-11021 BEARING, Crankshaft 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

LW-13683 BEARING, Crankshaft 4

12 LW-13884 BEARING, Crankshaft, front 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

LW-13885 BEARING, Crankshaft, front 2

13 1LW-13792 SEAL, Crankshaft, oil 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-1 5628 SEAL, Crankshaft, oil 1

14 72075 SEAL, Oil, 3/32 section x 15/32 ID 2

15 72091 RING, Oil seal, 23/64 ID x 3/32

dia. section 2

16 72877 BODY, Hydraulic tappet 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

73061 BODY, Hydraulic tappet 8

17 LW-16064 SUPPORT ASSY., Starter ring gear 1 1 1 1 1 1 1

77579 SUPPORT ASSY., Starter ring gear 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11

75030 SUPPORT ASSY., Starter ring gear 1 1 1

LW-11573 SUPPORT ASSY., Starter ring gear 1

iW-11519 SUPPORT ASSY., Starter ring gear 1

18 72566 GEAR, Starter ring 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-10551 GEAR. Starter ring 1

1-3

O I vnOlVI I Nc 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

1816

i"c~’’$~-3

I"r"

i~,i0.,

r i.

ii ~Jijo´•!riI

II

\2

i i\1 ´•t~-i/

Gi’ /rjiri’\II’\1 ic,‘\G

s

a´•uu=ii%

11r: I

ii:

iii r´•o

8

yl,"7ii

r\S"d\1i c:’Ij\Cc~"-;

r,ICi:cIfao

)i,l i(~3:

\j C;"/~

Figure 2. OIL LEVEL GAGES AND CRANKCASE RELATED PARTS

1-4

~7AVCO LYCOMING 1G, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CRANKSHAFT, CAMSHAFT AND RELATED PARTS



EF.I I


NUMBER AlclclclciclclclJle A B c c D E 6 F A A B H

L111111111111111111111ABCCDEFAEAAABAABABEGA3 L 666 66 DDD 6

LW-11229 CRANKSHAFT COUNTERWEIGHT ASSY. 1 11

LW-11579 CRANKSHAFT COUNTERWEIGHT ASSY.

LW-12336 CRANKSHAFI COUNTERWEIGHT ASSY. 1

LW-17273 CRANKSHAFT COUNTERWEIGHT ASSY. 1 f

LW-17276 CRANKSHAFT COUNTERWEIGHT ASSY. 1



74966 CRANKSHAFT ASSEMBLY

74708 CRANKSHAFT ASSEMBLY 1 1 1 1

77417 CRANKSHAFT ASSEMBLY 1 1

75157 CRANKSHAFT ASSEMBLY 1

76428 CRANKSHAFT ASSEMBLY 1 1

LW-12335 CRANKSHAFT ASSEMBLY 1



LW-11228 CRANKSHAFT ASSEMBLY 1 1 1

LW-11578 CRANKSHAFT ASSEMBLY





LW-17170 CRANKSHAFT ASSEMBLY 1 1






LW-17254 CRANKSHAFT ASSEMBLY f

LW-17160 CRANKSHAFT ASSEMBLY 12 STD-1211 PLUG, 2.00 dia. expansion 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

3 LW-14529 PLUG, 2-1116 dia. expansion 14 77416 PLUG, Crankshaft 1 1 1

5 1102 PLUG, 1/8-27 pipe, Alien 1 1 1 1 1 1 1 1 1 1 1

6 STD-1065 DOWEL, Stepped, 19/64 1/4

dia. x 55/64 long 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

7 STD-2078 DOWEL, 3/8 OD x 1/2 long i 1 1 1

8 61510 PLUG, 1-3/4 OD 1 19 74711 PLUG, 1-1/4 OD 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10 174710 TUBE, Crankshaft oil 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1)1 68484 TUBE, Crankshaft prop, oil 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 112 172060 BUSHING, Prop. flange, indexing 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

75560 BUSHING, Prop. flange, indexing 1 1 1 1 1

72074 BUSHING, Prop. flange, indexing 1 1

13 72061 BUSHING, Prop. flange, short 1 1 1 1 1 1 1 1 1 1 1 1 11172061 BUSHING, Prop. flange, short 2 2 2 2 2 22

1-5

~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

CRANKCRSE, CRANKSHAFT AND CAMSHAFT GROUP

CRANKSHAFT, CAMSHAFT AND RELATED PARTS (Cont.)


LIO-360 TIG-380FIG. N

EF PART 10-360 HIO-360 AEIO-380

DESCRIPTIONNUMBER AC C C C C C C J C A B C C D E E F A A B H


3 L 666 66 DDD 6

14 72062 BUSHING, Prop. flange, long 4 4 4 4 4 4 4 3 3 4 4 4 4 4 4 4 4

75561 BUSHING, Prop. flange, long 3 3 3 3 3

15 73810 BUSHING, Cr’kshaft dyn. ct’wt. 4 4 4 4 4 4

16 72801 COUNTERWEIGHT ASSY. 2 2 2 2 2 2

17 171903 BUSHING, Dynamic counterweight 8 8 8 8 8 8

18 ILW-10977 ROLLER, Dynamic ct’wt., 8th order 2 2 2 2 2 2

19 ILW-10945 ROLLER, Dynamic ct’wt., 6.3 order 2 2 2 2 2 2

20 LW-14820 RING, Internal retaining 8 8 8 8 8 8

21 i 71907 WASHER, Dynamic counterweight 8 8 8 8 8 8

22 76097 CAMSHAFT 1 1 1 1 1 1 1 1

LW-11754 CAMSHAFT 1 1 1 1 1 1 1 1

LW-12312 CAMSHAFT 1 1

LW-14970 CAMSHAFT 1

LW-12311 CAMSHAFT 1

LW-15877 CAMSHAFT 1

23 61155 GEAR, Crankshaft 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-10284 GEAR, Crankshaft 1 111

24 61156 LOCKPLATE, Crankshaft gear 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ‘1 1 1

LW-10332 LOCKPLATE, Crankshaft gear 1 1 11

25 STD-847 SCREW, 5/16-24 x 1.00 long 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

26 AN8-14A BOLT, 1/2-20 x 1-19/32 long, hex. hd. 1 1 11

1-6

o I vcoivi I NG 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

17;1,17

57

,,?18,11111

21

4

2.3

iu~c3‘

6,714

25

24

i1

Cj12 14

23-7

13

1424

14

74966

74708

75157

14 1 Q 77417

LW11228

LW-12335

coK 13 1$ O 3 0 LW-1716012 14

LW-17166

N

13 LW-17173LW-17171LW1724676428

14 LW-1725414 LW 1368812

LW 16059

LW 17168

14 14 LW 17170

iW 1724977851

LW-1157878134

LW17250

Figure 3. CRANKSHAFT, CAMSHAFT AND RELATED PARTS

1-7

~AVeO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CRANKSHAFT IDLER GEARS AND TACHOMETER DRIVE

OUANTITY PER ASSEMBLYO

LIO-380 TIG-380FIO. N

IPART 10-380 HIO-360 AEIO-380



4 L 666 66 DDD 6

1 61544 PLUNGER, Fuel pump, long 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 74996 GEAR ASSY., Crankshaft idler, plain 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1

3 77309 BUSHING, Crankshaft idler gear 1 1 1 1 1 2 1 1 1 1 2 1 1 1

4 75072 GEAR ASSY., Crankshaft idler 1 1 1 1 1 1 1 1 1 1 1 1 1

5 77309 BUSHING, Crankshaft idler gear 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6 LW-12911 GEAR ASSY., Crankshaft idler 1

7 LW-10299 SHAFT, Crankshatt idler gear 1


9 LW-10298 SHAFT, Crankshaft idler gear 1

10 LW-10296 GEAR ASSY., Crankshaft idler 1 1 1

11 I LW-10299 SHAFT, Crankshaft idler 1 1 1

12 LW-10288 GEAR ASSY., Crankshaft idler 1 1

13 LW-10298 SHAFT, Crankshaft idler 1 1 1


15 78368 PIN, 3/16 dia. x 2-21/64 long 1

16 76118 SPACER, Tachometer shaft centering 1

17 MS16625-1081 RING, Internal retaining 1

18 LW-13796 SHAFT, Crankshaft idler gear 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

19 STD-2167 SCREW, 5/16-18 long, hex. hd. dr. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

20 ISTD-2168 NUT, 5/16-18 NC-3 slotted shear 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1-8

L~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

jz.a’; I

1

i?

i/Is

14

´•1

II

3C37/i

19 r"’"7 k-"

B6´•1b~j /I

-~´•T

3:/s ~r\

-jYi~n-"\--19

3 .143

B

Figure 4. CRANKSHAFT IDLER GEARS AND TACHOMETER DBIVE

1-9

~7AVCO LYCBMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS GATALOGWIDE CVLINDER FLANGE CRANKOASE MODEL ENGINES


PROPELLE~ GOVERNOR ORIVE ASSY. (CRANKCASE)


LIO-360 VIO-360FIG. N

PART sO´•380 HIO-360 BEIO-380DESCRIPTION

NUMBER AC C C C C C C J C A B C C D 6 E F A A B H


5 L 666 66 000 6

1 77875 GEAR, Prop. governor driven 1 1 1

2 LW-14021 SHAFT, Prop. governor idler gear 1 1 1

3 77874 GEAR ASSY., Prop. governor idler 1 1 1

4 77872 BUSHING, Prop. governor idler gear 2 2 2

5 STD-19 DOWEL, 3/32 dia. x 7/32 long 1 1 1

6 STD-798 DOWEL, 3/32 dia. x 9/32 long 1 1 1

7 73249 WASHER, Thrust un un un

73250 WASHER, Thrust un un un



8 AN565B1032H5 SET SCREW, No. 10-32 x 5/16 long 1 1 1

9 70455 GASKET, 25/32 ID x 1-1/8 OD x

1/16 thick 1 1 1

10 LW-13896 PLUG, 3/4-16 hex. hd. 1 1 1

11 168317 SHAFTGEAR, Prop. governor drive 1 1 1 1 1 1 1

12 171596 WASHER, Accessory driven gear 1 1 1 1 1 1 1 1

13 STD-1221 RING, 13/16 dia. x 1/32 thick,

external retaining 1 1 1 1 1 1 1 1

14 169551 GA~SKFC, 1 1 ~1 1 1 1 1 1

15 69106 COVER, Governor drive adapter pad 1 1 1 1 1 1 1

16 STD-35 WASHER, 5/16 plain 4 4 4 4 4 4 4 4

17 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4

18 ISTD-1410 NUT, 5/16-18 plain 4 4 4 4 4 4 4 4

19 lSTD-783 PLUG, 1/4-18 NPT, Alien 1 1 1 1 1 1 1

20 72053 GASKET, Governor 1 1 1 1 1 1 1 1 1 1 1 1

21 72378 COVER, Governor drive 1 1 1 1 1 1 1 1 1 1 1 1

22 ISTD-35’ WASHER, 5/16 plain unlunlUnlunlunlUnlUn un uniuniuniun

23 ISTD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4 4 4 4 4

24 STD-1410 NUT, 5/16-18 plain 4 4 4 4 4 4 4 4 4 4 4 4

32 required for Woodward governor.4 required for "AN" governor.

1-10

o I vnorvi I NG 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

~Bi´•C//

E~i´• 6i´•:

E~3

1314

17is1m39\

i";" 2322 li3i,a~Y´•.

o D

c/~7;;3

o

boi

i5ar4~L 5,6

7

~1

Figure 5. PROPELLER GOVERNOR DRIVE ASSEMBLY (CRANKCASE)

1-11

~AVeO LYCOMING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

CRANKCA9E, CRANKSHAFT AND CAMSHAFT GROUP

!CRANKCASE ATTACHING PARTS



F PART 10-360 HIO-360 AEIO-360DESCRIPTION

NUMBER ACCCCCCCJCABCCDEEFAABH


6 L 666 66 DDD 6

1 STD-1414 BOLT, 1/4-20 x 1-1/2 long, hex. hd. 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 5 5

2 STD-1646 BOLT, 1/4-20 x 2.00 long, hex. hd. 2 2

3 STD-8 WASHER, 1/4 plain 191191191191191201 191191201191191191 19119119119119119 120 1131134 60803 STRAP, Lifting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 i 1 1 122

5 STD-2084 BOLT, 1/4-20 x 1-3/4 long, hex, hd. 1

6 STD-1419 BOLT, 1/4-20 x 1-1/8 long, hex. hd. 3 3 3 3 3 4 3 3 4 3 3 3 3 3 3 3 3 3 4 3 3

7 STD-1BO WASHER, 1/4 lock, internal teeth 121121121121121131121121131121121121121121121121121121131121128 STD-1411 NUT, 1/4-20 plain 9

9 STD-1416 BOLT, 1/4-20 x 1-1/2 long, hex. hd.

dr. end 3

10 STD-8 WASHER, 1/4 plain (Max. 9) un

11 i STD-1409 NUT, 1/4-20 slotted shear 3

12 ISTD-33 WASHER, 3/8 plain 3

13 AN960-616L WASHER, 3/8 plain thick (Max. 3) on


15 AN6-34A BOLT, 3/8-24 x 3-37/64 long, hex. hd. 2 2 2 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2 1 2 2

16 L\N-11866 SPACER NUT, Compressor 1

LW-11866 SPACER NUT, Compressor 2 2

17 ISTD-33 WASHER, 3/8 plain 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2


STD-33 WASHER, 3/8 plain 6 6

18 ISTD-678 WASHER;, 3/8 lock, internalteeth 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

STD-678 WASHER, 3/8 lock, internal teeth 1

19 STD-596 NUT, 3/8-24 plain 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

STD-596 NUT, 3/8-24 plain 1

20 76220 STUD, 1/2-20 x 10-11/16 long 4

1-12

~AVCO LYCOMING 1G, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOG


2,5,7,8;10

1,3,7,8;1 0--~ 3,7, 8 ,1 ’7 1,3,7,8,10 rl 2 ,14

O

12;13,1520

1 7 ,18,1 9

18

3,6,7

3.7~8;10--/ ~--3,6,7,10 YL3,9.11


1-13

~IAVC=O LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES



QUANTITV PER ASSEMBLVO


fPART 10-360 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C CC C J CA BC C D E 6 F A A B H

L1111111111111111111117 ABCCDEFAEAAABAABABEGA

L 666 66 DDD 6

1 73818 GASKET, Accessory housing 1

2 76110 HOUSING ASSEMBLY. Accessory 1 1 1 1

76111 HOUSING ASSEMBLY, Accessory 1

76143 HOUSING ASSEMBLY. Accessory 1

76144 HOUSING ASSEMBLY, Accessory 1 1 1 1

76145 HOUSING ASSEMBLY, Accessory 1 1

77997 HOUSING ASSEMBLY, Accessory 1 1

77516 HOUSING ASSEMBLY, Accessory 1

LW-10482 HOUSING ASSEMBLY. Accessory 1 1 1

LW-11520 HOUSING ASSEMBLY. Accessory 1

LW-10885 HOUSING ASSEMBLY, Accessory 1


LW-10892 HOUSING ASSEMBLY, Accessory 1 1 1


3 250-22 STUD, 1/4-20 x 2-3/4 long 4 4 4 4 4 4 4 4 4 4 4

4 61400 STUD. 1/4-20 x 1-3/16 long 4 4 4 4 4 4

5 250-12 STUD, 1/4-20 x 1-1/2 long 4

6 75888 STUD. 1/4-20 x 1-1/4 long 4 41101 4 4 6 6 6

7 310-12 STUD, 5/16-18 x 1-1/2 long 4 6 6 6 6 6 6 6 4 4 4 4 6 4 6

310-12 STUD, 5/16-18 x 1-1/2 long 8 8 8

8 310-13 STUD, 5/16-18 x 1-5/8 long 4 2 2 4 4 4 4 2 2 2

9 310-16 STUD, 5/16-18 x 2.00 long 4

10 310-18 STUD, 5/16-18 2-1/4 long 4 4

11 (31C-19 STUD. 5/16-18 x 2-3/8 long 2 2 2 2 2 2 2 2

310-19 STUD. 5/16-18 x 2-3/8 long 4 4

12 3100-17 STUD, 5/16-18 x 2-1/8 long. drilled 3 3 3 3 3 3 3 4 2 3 3 3 3 3 3 3 3 3

13 131CD-22 STUD, 5/16-18 x 2-3/4 long. drilled 1

14 LW-12589 INSERT, Hell-coil, 5/8-18 x 3/8 long 1 1 1 1

15 MS-124703 INSERT, Hell-coil, 3/4-16 x 1-1/8 long 1 1 1 1

16 LW-10341 INSERT, Heli-coil, 1.00-14 x 3/8 long 1 1 11

17 1102 PLUG, 1/8 pipe. Alien 2 1 2 2 2 2 2 2 2 2 2

1102 PLUG, 1/8 pipe. Alien 3 3 3 3 3 3 3 3

18 STD-784 PLUG, 3/8 pipe, Alien 1 1 1 1 1 1 1 1 1 1

19 ISTD-783 PLUG, 1/4-18 NPT, Alien 1

20 ISTD-1339 PLUG, 1/16-27 NPT, Alien 1 1

21 76119 SHIELD. Accessary breather oil 1

2-1

´•eo I i NG 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

"7

\-I-

3.4 ~2 t 19

IC?

O7-( (a C3 a 21’

~-191

s~ojlJ186

XOi

51

3\ C3~C a ~v;

I

i

i\ 2

9

15--\

~gi..12-/ O

Figure 7. ACCESSORY HOUSING ASSEMBLY

2-2

~AVCO LYCOMING 1O, LIO, HIO, TIO, AEiO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


PROPELLER GOVERNOR DRIVES, COVERS, OIL LINES AND ADAPTER ASSEMBLY


LIO-360 TIG-380FIG N


DESCRIPTIONNUMBER AC C C C C C C J C A B C C D E E F A A 0 H

Llllllllllllllltllll118 ABCCDEFAEAAABAABABEGA

L 666 66 DDD 6

1 LW-12914 GEAR ASSY., Accessory driven 1

2 LW-12913 THRUST BUTTON, Prop. gov. gear 1

3 71596 WASHER, Accessory driven gear 1


5 LW-12347 PLATE, Propeller governor pad 1

6 72378 COVER, Governor drive 1

7 STD-35* WASHER, 5/16 plain un


9 STD-1410 NUT, 5/16-18 plain 4

10 68315 GASKET, Accessory drive adapter 1 1 1 1 1 1 1 1

11 75153 ADAPTER ASSY., Prop. governor drive 1 1 1 1 1

75545 ADAPTER ASSY., Prop. governor drive 1 1 1 1 1 1 1 1

12 1102 PLUG, 1/8-27 NPT, Alien 1 1 1 1 1 1 1 1

13 310-16 STUD, 5/16-18 x 2.00 long 4 4 4 4 4

14 310-14 STUD, 5/16-18 x 1-3/4 long 4 4 4 4 4 4 4 4

15 ISTD-1774 PIN, 1/8 dia. x 1/4 long 1 1 1 1 1 1 1 1

16 STD-35 WASHER, 5/16 plain 4 4 4 4 4 4 4 4

17 STD-475 WASHER, 5/161ock, internalteeth 4 4 4 4 4 4 4 4

18 STD-1410 NUT, 5/16 plain 4 4 4 4 4 4 4 4

19 75166 TUBE ASSY., Prop. gov. oil line 1 1

75167 TUBE ASSY., Prop. gov. oil line 1 1 1 1 1

LW-12213 TUBE ASSY., Prop. gov. oil line 1 1

LW-12920 TUBE ASSY., Prop. gov. oil line 1

20 ISTD-1930 HOSE, 3/8 ID x 1.00 long 1 1 1 1 1 1 1

21 LW-12700 HOSE, 3/8 ID x 6.00 long 1 1

22 75165 CLIP, Prop. gov. oil line 1 1 1 1 1 1 1 1

23 LW-12752 CLAMP, Gov, oil tube support 1 1

24 STD-35 WASHER, 5/16 plain 3 3 3 3 3 3 3

STD-35 WASHER, 5/16 plain 2 2

25 ISTD-475 WASHER, 5/16 lock, internal teeth 1 1 1 1 1 1

STD-475 WASHER, 5/16 lock, internalteeth 2 2

26 ISTD-1838 BOLT, 5/16-18 x 15/16 long, hex. hd. 1 1 1 1 1 1 1

STD-1838 BOLT, 5/16-18 x 15/16 long, hex, hd. 2 2

27 LW-I 6266-25-38 CLAMP 1 1 1 1 1 1 1

28 MS20822-6 ELBOW, 3/8 flared tube 1/4 NPT, 90" 1 1 1 1 1 1 1 1

29 75739 NIPPLE, 3/8 flared tube 9/16-18

str. thd. 1 1

30 74070 ELBOW, 3/8 flared tube 9/16-18

str. thd. 1 1 1 1 1 1 1

32 required for Woodward governor.4 required for "AN" governor.

2-3

I ’r/r´•OIV1ING 10, LIO, HIO, T16, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

B;iiii

--7

-I

~x r i;;1134-i~Cl;i

ic\ y\

~n,)

ijo~

B

s

_

11

13,14

\L9

:n~~ls

I~ -----------------------------------------------------------------------------------------17

~28

i/

~--19

i\2i Lei 28242~

25

IIcy/24

c~il

23,2719

Figure 8. PROPELLER GOVERNOR DRIVES, COVERS, OIL LINES AND ADAPTER ASSEMBLY

2-4

~AVC=O LYCC>MING 1D, LID, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


PROPELLER GOVERNOR AND TURBO SCAVENGE PUMP (TIO-360)


N t10´•360 TIG-360


DESCRIPTIONNUMBER AC 0 0 C 0 C C J C A 6 C C O E E F A A 6 H

L111111111111111111111g ABCCDEFAEAAABAIABABEGA

L 666 66 DDD 6

1 68315 GASKET, Accessory drive adapter t

2 LW-12571 DRIVE ASSY., Turbo scavenge pump 8

governor 1

3 LW-12170 ADAPTER ASSY., Turbo scavenge 1

4 77720 ADAPTER ASSY., Prop. governor drive 1

5 LW-11518 SHAFT, Prop. governor drive 1

8 STD-95 KEY, 1/8 x 1/2 Woodruff 1

7 76302 PUMP, Geroter 1

8 STD-1006 RING, Oil seal, 7/16 10 x 3/32 dia. t

9 STD-1BOZ RING, Oil seal, 5/16 ID x 1/16 dia. 1

10 LW-f2168 SHAFTGEAR, Frap. gov. drive f

11 117708 WASHER, Retaining prop. gov. drive

shatt gear 1

12 STD-1667 RLNG, 15/32 dia. x 1/32 thick, ext.

retaining 1

13 lSTD-8 WASHER, 1/4 plain 4

14 ISTD-1BO WASHER, 1/4 internal lock 4

15 STD-14~1 NUT, 1/4-20 plain 4

16 310-14 STULL 5/16-18 x 1-3/4 long 4



19 STD- 1410 NUT, 5/16-18 plain 4

20 77775 TUBE ASSY., Pros. gow. oil line 1

21 STD- 1930 HOSE, 3/8 fD x f.OO long 1

22 175165 CLIP, Prop. gov. oit~ine support 1-

23 STD-35 WASHER, 5~t6 p~ain 3

24 iSTD-475 WASHER, 5/16; lock, internalteeth t

25 STD- 1838 BOLT, 5/16-18 x 15Pt6 long, hex, hd. 1

26 LW-16266-25-38 CLAMP 1

2-7 EMS20822;6 ELBOW, 318 flared tube 1/4 NA, 900 1

2& 74070 ELBOW, tube 8 9/’16-18 str.

tRd. adi., 450 t

2-5

h

2759I IC)

12 O11

1Q IL

cD 17 1

a

Oxl 19

aa

O18

r

3 ZOn o

o

rri 7

23

S~r

I,

C 16j I

h) Z

4

Fa 147O

O

X i i X o

oii (Pm ’m

c! ~o

c C,28 50n

\-217 33

O Fm;1 cn

24 I v,m 32

7e25-7

I d23~ o

28

Z PD

~IAVCO LYCOMING 110, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANI(CASE MODEL ENGINES



OUANTITV PER ASSEMBLYO

elO-360 T10-380FIG, N

1F. PART 10-380 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J C A 6 C C D 6 E F A A 6 H

Lllllllllltlllllllll11ABCCDEFAEAAABAABABEGA

10 L 666 66 DDD 6

1 78528 BODY ASSY., Oil pump 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-11839 BODY, Oil pump 1

LW-10342 BODY, Oil pump 1 1 1

2 STD-1339 PLUG, 1/16-27 NPT, Alien 1 1 1 1 1 1 1 1 1 1 1 1 1 1

3 LW-13775 IMPELLER ASSY., Oil pump driven 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4 78530 SHAFT, Oil pump idler 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5 LW-13774 IMPELLER, Oil pump driven 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11

6 LW-18110 IMPELLER ASSY., Oil pump driven 1 1 1

7 78530 SHAFT, Oil pump idler 1 1 1 1

8 LW-18108 IMPELLER, Oil pump driven 1 1 1

9 LW-14040 GEAR ASSY., Oil pump drive 1 1

10 61166 THRUST BUTTON 1 1 1

11 161174 SHAFT, Oil pump drive 1 1 1 1 1 1 1 1 1 1 1 1 1 1 11

12 160746 IMPELLER, Oil pump driving 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-18109 IMPELLER, Oil pump driving 1 1 1 1

13 STO-35 WASHER, 5/16 plain 3

14 STD-1420 NUT, 5/16-18 slotted 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

15 ISTD-2150 BOLT, 5/16-18 x 1-3/4 long 3 3 3 3

16 STD-1227 WASHER, 1/4 (copper) 2

17 ISTD-1904 BOLT, 1/4-20 x 2-3/4 long, hex. hd.,

dr. end. 2


19 STD-1409 NUT, 1/4-20 slotted shear 2

20 ILW-14260 SEAL, Tachometer drive oil 1

21 STD-8 WASHER, 1/4 plain 12112112112112112112112112112112112112112112112112110112112112


23 ISTD-1204 BOLT, 1/4-20 x 15/16 long, hex. hd. 10110110110110110110 9110110110110110110 9 9 9 9110110110

24 iSTD-1414 BOLT, 1/4-20 x 1-1/2 long, hex. hd. 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2

25 STD-1905 BOLT, 1/4-20 x 2-5/16 long, hex. hd. 1


27 ISTD-1215 BOLT, 1/4-20 x 1-1/4 long. hex. hd. 1 1 1 1

28 ISTD-1875 BOLT, 1/4-20 x 13/16 long, hex. hd. 2 2 2 2

2-7

~a\/CO I VCOIV1 ING L10, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

21,22,23

207

BC\~1,i

i

jji

i I

2tZ2,28!i(Cij~´•´•

~LiC,

~i

I5,6,8r’ o

aI~i\ir:i//

Pr=V

iI4,7

rii

c

I=i-´•´•21.22,24,27

21,22.24, 28

1

i- 10lj111~ mi

iiiiCiii

B 213

17.25 L/~m

1IL~ 16

18


2-8



OIL FILTER ASSEMBLY

OUANTITY PER ASSEMBLVO

FIO. N LIO-360 TIG-360


DESCRIPTIONNUMBER AC C C C C C C J C A BC C D E E F A A 6 H

Lllltllllllllllllltl11ABCCDEFAEAAABAIABABEGA11 L 666 66 DDD 6

1 61173 GASKET, Oil pressure housing 1 1 1 1 1 1 1 1 1 1

2 LW-12795 GASKET, Oil filter adapter 2 2 2 2 2 2 2 2

3 62817 SCREEN ASSY., Oil pressure 1 1 1 1 1 1 1 1 1 1

4 69510 HOUSING, Thermostatic valve and oil

pressure screen 1 1 1 1 1 1 1 1 1 1

5 77852 OIL FILTER BASE ASSEMBLY 1 1 1 1 1 1 1 1

6 STD-8 WASHER, 1/4 plain 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

7 STD-160 WASHER, 1/4 internal lack 4 4 1 1 1 1 1 1 4 4 4 4 1 1

8 STD-1411 NUT, 1/4-20 plain 4 4 1 1 1 1 1 1 4 4 4 4 1 1

9 STD-1856 SCREW, 1/4-20 x 15/16-1.00 long, hex.

hd., slotted 4 4 4 4 4 4

STD-1856 SCREW, 1/4-20 x 15/16-1.00 long, hex.

hd., slotted 3 3 3 3 3 3 3 3

10 LW-25-0.75 BOLT, 1/4-20 x 3/4 long, hex. hd. 4

11 125C-10 STUD, 1/4-20 x 1-1/4 long 1 1 1 1 1 1 1 1

12 STD-294 GASKET, 7/8 OD x 5/8 ID x 3/32

annular 1 1 1 1 1 1 1 1 1

13 LW-10321 SPRING, Oil filter bypass valve 1 1 11

14 176539 SEAT, Oil relief valve 1 1 1 1

15 LW-10320 SLEEVE, Oil filter bypass valve 1 1 11

16 MS16625-1100 RING, ~nternal retaining 1 1 1 1

17 177853 OIL FILTER HOUSING ASSEMBLY 1 1 1 1 1 1

18 ILW-13906 OIL FILTER ASSY., Short 1 1 1 1

19 LW-13215 OIL FILTER, Short 1 1 1 1 1 1

20 LW-13904 KIT, Converter plate, oil filter 1 1 1 1

21 75944 VALVE ASSY., Temp. control oil

cooler bypass 1

22 176510 GASKET, Valve assembly 1

2-9

O I vcorvi ING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

’7´•Cs

47

a ’757i-I~

27~ 11 i\

s\

7 00

1 7,19 "7~´• Bjnj\ji .iii: ~‘I‘

1~ 4

ia,

:1 ’"\-e;sl:rI i3/1;

i´• lib

13

18 1 714

207;\Igrk[l, !I:ii

’87i

cs’’j.ri 22-/

i 21-/

Figure 11´•. O~L F~LTER ASSEMBLY

2-10

~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


OIL COOLER AND BREATHER FITTINGS



t 1PART 10-380 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C 0 C C C J C A B C C 0 6 E F A A B H


12 L 666 66 000 6

1 STD-294 GASKET, 7/8 OD x 5/8 ID x 3/32

annular 1 1 1 1 1 1 2 1 1 1 1 1 1 2 2 2 1 1

2 69675 CONNECTOR, Accessory housing to oil

cooler inlet 1 1 1 1 1

3 71623 WASHER, Oil cooler fitting 1

4 AN777-8D ELBOW, Universal, 750 1

5 AN901-’8A GASKET, Metal tube connection seal 1

6 71620 BOLT, Oil cooler fitting 1

7 62417 PLUG, Oil cooler bypass 1 1 1 1 1 1 1 1 1

8 1540 PLUG, Thermometer well 2 2 2 2

9 MS29512-10 SEAL, Oil, 3/32 section x 45/64 ID 1

10 IAN814-10L PLUG, Turbo drain back 1

11 ISTD-784 PLUG, 3/8 pipe, Alien 2 2 1 1 2 1 1 1 2 2 2 2 2 2 2 1 2

12 71 140 FITTING, Breather 1 1 1 1 1 1 1 1 1 1 1 1

72413 FITTING, Breather, 120" elbow 1

13 MS20823-8 ELBOW, 1/2 flared tube, 3/8 pipe thd. 1 1 1 1

14 AN844-10D ELBOW, Pipe thd., 5/8 ID hose, 45" 1 1 1 1 1 1

15 73143 ELBOW, 1/4 tube to 1/8 NPT, 900 1 1 1

16 MS20822-6-6 ELBOW, 3/8 tube to 3/8 NPT, 900 1

2-11

o I vcoiVI I NG 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

1

3

--‘´•J

7i

~by"’l" ia

3\

121a)r3 r3i/~j"YdE~

´•Irj\

r’:s ~ii. ill

c´•´•l

~i9

Figure 12. OIL COOLER AND BREATHER FITTINGS

2-12

~A1VCO I vnOlV1 I Nc 10, LIO, HIO, TIG, AEi0-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


VAC~JUM PUMP DRIVES AND COVERS




NUMBER AC C C C C C C J C A 6 C C D 6 E F A A B H


13 L 666 gg 000 6

1 61183 GASKET, Accessory adapter 1 1 1 1 1 1 1 1

2 61098 ADAPTER ASSY., Vacuum pump 1 1 1 1 1 1 1 1

3 STD-1774 PIN, 1/8 dia. x 1/4 long 1 1 1 1 1 1 1 1

4 STD-208 OIL SEAL, 7/8 ID x 1-1/2 OD x

5/16 wide 1 1 1 1 1 1 1 1

5 72970 GEAR ASSY., Vacuum pump driven 1 1 1 1 1 1 1 1

6 72962 THRUST BUTTON, Vacuum pump cover 1 1 1 1 1 1 1 1


8 61166 THRUST BUTTON 1

9 71596 WASHER, Accessory driven gear 1 1 1 1 1 1 1 1 1

10 STD-208 OIL SEAL, 7/8 ID x 1-1/2 OD x

5/16 wide 1

11 18313 GASKET, Vacuum pump 1 1 1 1 1 1 1 1 1

12 61183 GASKET, Accessory adapter 1 1 1 1 1 1 1 1 1 1

13 60430 COVER, Vacuum pump 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

14 168593 SPACER, Vacuum pump stud 1 1 1 1

15 ISTD-8 WASHER, 1/4 plain 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

16 STD-160 WASHER, 1/4 lock, internalteeth 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

17 STD-1411 NUT, 1;/4-20~.plain 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2-13

I 10, LIO, HIO, TIG, AE101360 SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

~’I

7 C~4-10

i

s\

i~\

"~u,l

,i;

"713

s

1Is

(si

j14~ ,/3

\--1 -12

Figure 13. VACUUM PUMP DRIVES AND COVERS

2-14

~AVCO LYCOMING 1O, LID, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL PUMP AND FUEL PUMP COVERS




DESCRIPTIONNUMBER AC C C C C C C J C A 6 C C 0 E E F A A 6 H

L11111111111111111111114 ABCCDEFAEAAABAIABABEGA

L 666 66 DDD 6

1 60096 GASKET, Fuel pump 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 LW-10799 SPACER, Fuel pump insulating 1 1 1 1

3 LW-15473 FUEL PUMP, Dual diaphragm (6441234) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

77443 FUEL PUMP (RG17980-E) 1 1

LW-11166 FUEL PUMP (RG17980-K) 1

LW-15506 FUEL PUMP (RG17980-R) 1 1 1

4 STD-33 WASHER, 3/8 plain 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

5 STD-35 WASHER, 5/16 plain 4 4 4 4 4

6 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4

7 STD-1882 SCREW, 3/8-16 x 1-9/32 long, socket

hd., dr. hd. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

8 STD-1410 NUT, 5/16-18 plain 4 4 4

9 LW-31-1.88 BOLT, 5/16-18 x 1-7/8 long 4 4 4

10 AN816-6 NIPPLE, 3/8 tube, 1/4 NPT 1 1 1

11 IMS20823-6 ELBOW, 3/8 tube, 1/4 NPT, 450 1 1 1

12 78067 ELBOW, 1/4 tube, 1/8 NPT, 900 1 1 1

13 72231 GEAR ASSY., Fuel pump idler 1 1

14 177309 BUSHING, Crankshaft idler gear 1 1

15 LW-10323 GEAR MSY., Fuel.i:pump´•idler 1 1 1

16 LW-10298 SHAFT, Crankshaft idler 1 1 1

17 75924 SHAFTGEAR ASSY., Fuel pump drive 1 1

LW-10327 SHAFTGEAR ASSY., Fuel pump drive 1 1 1

18 61166 THRUST BUTTON 1 1 1 11

19 169164 GASKET, Fuel pump adapter 1 1 1 1 1

20 69159 ADAPTER ASSY., Fuel pump drive 1 1 1 1 1

21 ISTD-1774 PIN, 1/8 dia. x 1/4 long 1 1 1 1 1

22 STD-213 OIL SEAL, 3/4 ID x 1-3/8 OD

x 5/16 wide 1 1 1 11

2-15

leO I vr,orvl I NP~ 10, LIO, HIO, TIG, AE101360 SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

D

-ii~;j,

1.1~3i4

i /C

>1

iij

iI)2

19

c~-

21

mns~

5~ 17

O

9

~lo

Figure 14. FUEL PUMP AND FUEL PUMP COVERS

2-16



CYLINDER ASSEMBLY




DESCRIPTIONNUMBER AC C C C C C C J C A BIC C D E E F A A B H

Llltllllllllllllllll11ABCCDEFAEIAAABAABABEGA

15 L 666 68 DDD 6

1 LW-12427 CYLINDER HEAD ASSY.. Nitrided 4 4 4

LW-12993 CYLINDER HEAD ASSY.. Nitrided 4 4 4 4 4 4 4 4 4 4 4 4

77544 CYLINDER HEAD ASSY.. Nitrided 4 4

LW-1904 7 CYLINDER HEAD ASSY.. Nitrided 4 4 44

LW-12988 CYLINDER HEAD ASSY.. Nitrided 4 4 4 4

2 72057 SEAT. Intake valve 4 4 4

LW-12688 SEAT. Intake valve 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

72212 SEAT. Intake valve 4 4 4 4 4 4

3 72058 SEAT. Exhaust valve 4 4 4

71894 SEAT. Exhaust valve 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

4 60028 GUIDE. Valve, intake 4 4 4

66713 GUIDE. Valve, intake 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

5 74230 GUIDE. Valve, exhaust 4 4 4

75838 GUIDE. Valve, exhaust 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

6 66796 INSERT. Spark plug. 18 1.5MM 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

69260 INSERT. Spark plug (long reach) 8 8 8 8 8

7 STD-1872 INSERT. 1/8-27 Hell-coil taper

pipe thd. 8 8 8 8 8 8 4 8 8 8 8 8 8 8 4 4 4 4 8 8 8

8 31C-12 STUD. 5/16-18 xl-1/2long 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

9 310-13 STUD. 5/16-18x 1-5/8 long 8 8 8 8

10 25C-9 STUD. 1/4-20 x 1-1/8 long 4 4 4

11 1250-8 STUD. 1/4-20 x 1.00 long 16116116116116116116116116116 16116116116116116 116116

12 66610 BUSHING, Rocker shaft 16 16116

66670 BUSHING. Rocker shaft 16116116116116116116116116116 16116116116116116116116

13 MS20823-6D ELBOW. 450 x 3/8 flared tube 4

14 172343 STABILIZER. Cyl. hd. fins. 15 teeth 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

15 172344 STABILIZER. Cyl, hd. fins. 26 teeth 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

16 1102 PLUG. 1/8-27 NPT. Alien 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2695 1O8

1

O

a ~3

a

ISt´•i~

ca /--14 ~aiTvlr orn

a

z O ‘~;"_"".wI

oo

/11O

xl

3 I l,i .Mv,C~ Ov,

m m

o

eaTmz

m

ma W

m-n Q)

50n

c~~3D

F m

z cn

gv,

3P1 m

II

IC)V)ro

m

Z Bn

Z Omcn G)

~IAVeO LYCOMING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATAL(IOWIDE CVLINDER FLANGE CRd\NKCASE MODEL ENGINES


CONNECTING ROD, PISTON AND RING ASSEMBLIES

QUANTITV PER ASSEMBLY



NUMBER C C C C C C C J C A B C C O E E F A A 6 HL111111111111111111111

ABCCDEFAEAAABAABABEGAL 666 88 DDD 6

1 LW-11750 CONNECTING ROD ASSEMBLY 4 4 4 4

LW-10646 CONNECTING ROD ASSEMBLY 4 4 4 4 4 4 4 4 4

77450 CONNECTING ROD ASSEMBLY 4 4 4 4 4 4

LW-11457 CONNECTING ROD ASSEMBLY 4 4

LW-13422 CONNECTING ROD ASSEMBLY 4 4

2 LW-13923 BUSHING, Connecting rod 4

3 75061 BOLT, Connecting rod 8 8 8 8LW-12596 BOLT, Connecting rod 8 8

75060 BOLT, Connecting rod 8 8 8 8 8 8 8 8 8 8 8 8 8 8 84 LW-12186 NUT, Connecting rod 8

5 LW-13521 BEARING, Connecting rod 8 8 8 8LW-14954 BEARING, Connecting rod 8 8 8 8 8 8 8 8 8LW-13209 BEARING, Connecting rod 8 8 8 8 8 8 8 8

6 75089 PISTON, Comp. ratio 8.50:1 4 4 4LW-10207-S PISTON, Comp. ratio 8.7:1 4 4 4 4 4 4 4 4 4 4 4 4 4LW-10545 PISTON, Comp. ratio 7.3:1 4LW-11487 PISTON, Comp. ratio 10.0:1 4

LW-14610 PISTON, Comp, ratio 8.0:1 4 4 47 LW-14078 PIN, Piston 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

LW-14077 PIN, Piston 4 4 48 60828 PLUG, Piston 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

LW-11775 PLUG, Piston pin 8 8 89 74241 RING, Piston compression 8

10 73857 RING, Piston, oil reg., expander type 4


c\2247

O

O

TI

oa

O ZA

Z

m OZ

A

Zn O

O r

o

b~ 2Y I

O Oz

/10-<p

z Xoc

o

mzz

o ~:OaO

v,

m-n Q)z mcnv,m 5; O3 z cna DP

m o30

(A ~J m

v,m 30

o

mznr

Z Omv, a



VALVE ASSEMBLY



t IPART 10-360 HIO-380 AEIO-360

DESCRIPTIONNUMBER C C C C C C C J C A 6 C C D 6 6 F A A 6 H

L1111111111111~1111111ABCCDEFAEAAABAABABEGA

17 L 666 66 DDD 6

1 73938 VALVE. Intake 4 4 4

LW-13622 VALVE, Intake, rotator drive 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

LW-12949 VALVE, Intake. rotator drive 4 4 4 4 4

73117 VALVE. Intake 4 4 4 4

2 LW-19001 VALVE, Exhaust, (nimonic) 4 4 4

LW-16740 VALVE. Exhaust. (nimonic) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

3 LW-11795 SPRING. Valve. inner 8 8 8

LW-11797 SPRING. Valve. inner 8 8 8 8 8 8 8 8 8 8 8 818 8 8 8 8 8

4 LW-11800 SPRING. Valve. outer 8 8 8

LW-11796 SPRING, Valve. outer 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

5 65441 SEAT. Valve spring. lower, intake 4 4 4

LW-13321 SEAT. Valve spring, lower, intake 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

6 LW-13323 SEAT, Valve spring. lower, exhaust 4 4 4

LW-13322 SEAT, Valve spring, lower, exhaust 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

7 LW-10077 SEAT. Valve spring, upper, intake 4 4 4 4 4 4 4

69532 SEAT. Valve spring. upper. intake 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

8 LW-16475 SEAT. Valve spring, upper. exhaust 4

9 60009 KEY, Valve. intake 8 8 8 8 8 8 8

72050 KEY. Valve. intake 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

10 162388 CAP,Valvestem 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

11 IMS13997-3 KEY. Valve, exhaust 8

12 MS13998-3 CAP. Valve stem, exhaust 4

13 178290 PLUNGER ASSY., Hydraulic tappet 8

14 178524 SOCKET, Push rod, hydraulic tappet 8

15 LW-11485 TUBE, Push rod shroud 8 8 8

72255 SHROUD TUBE ASSY., Push rod 81 8 1 8[ 81 81 81 srsl 878 8 8 8 8 8 8 8 8

16 ILW-14995 SPRING. Shroud tube 4 4 4

LW-13077 SPRING. Shroud tube 16116116116116116116116116116 16116116116116116116116

17 LW-12272 LOCKPLATE, Shroud tube 4 4 4

18 STD-1411 NUT. 1/4-20 plain 4 4 4

19 166728 WASHER, 25/32 ID x 1-1/4 OD x

3/32 thick 16116116116116116116116116116 16116116116116116116116

20 61503 SLEEVE, Shroud tube seal 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

21 62922 SEAL, Shroud tube 161’6116116116116116116116116 8116116116116116116116116 8 8

70310 SEAL. Shroud tube 8 8 8

I Revised March. 1986 3-5

2751

C~U

b*13

~14

21O

’7 r

dls-/ r, O

oo

2118/ie 3c

ua15iJ’,li 1

ZII o

j

iE2I

I´•I

oI I-. 1,

13, i17 r

riii: oi i i’i s Je1111/I!~ O

ejoen ibbO"Ii

s

/-811 zr

m

)r 12mo

a" o~7 z

amcn9--/ m

cn;ca

=0~b0P

mZ c~v, h






iPART 10-380 HIO-380 AEIO-380

DESCRIPTIONNUMBER AC C 0 C C C C J 0 A B C C D E E F A A B H


18 L 666 66 DDD 6

1 73434 ROD ASSEMBLY, Push A total un un un run

73435 ROD ASSEMBLY, Push of 8 un un un run

73436 ROD ASSEMBLY, Push push rods un un un run

73437 ROD ASSEMBLY, Push required un un un

73455 ROD ASSEMBLY, Push A total un lunlunlunlun lunlun run run run unlun un run unlun

73456 ROD ASSEMBLY, Push of 8 un run run run run run run lunlunlun unlun un run unlun

73457 ROD ASSEMBLY, Push push rods un run run run run run run lunlunlun unlun un run unlun

73458 ROD ASSEMBLY, Push required unlunlunlunlunlun IunlunIunlun unlun un run un

73553 ROD ASSEMBLY, Push A un un

73554 ROD ASSEMBLY, Push total un un

73555 ROD ASSEMBLY, Push of 8 un run run I un run run run run run Iun un I un i un I un run I un run run

73556 ROD ASSEMBLY, Push push’ unlunlunlunlunlunlunlunlunlun un I un i un lun lun I un lun lun

73557 ROD ASSEMBLY, Push rods unlunlunlunlunlunlunlunlunlun un run iun run run I un lun!un

73558 ROD ASSEMBLY, Push required un run run run i un lunlunlunlunlun un run run lunlun run run run

2 69444 ROCKER ASSY., Valve, intake 4 4 4 4

3 60398 BUSHING, Valve, rocker, intake 4 4 4 4

4 71266 ROCKER ASSY., Valve, intake 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

5 67114 BUSHING, Valve rocker 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

6 74636 ASS~., V~ve,.exhausf 4 4 4

7 74637 BUSHING, Valve rocker, exhaust 4 4 4 4

8 71265 ROCKER ASSY., Valve, exhaust 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

9 67114 BUSHING, Valve rocker 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

10 71549 WASHER, Valve rocker thrust 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

11 LW-13790 SHAFT, Valve rocker 4 4 4 4

72626 SHAFT, Valve rocker 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

12 LW-12892 THRUST BUTTON, Rocker shaft 8 8 8 8

13 66732 GASKET, Valve rocker shaft cover 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

14 166731 COVER, Valve rocker shaft 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

15 STD-1SO WASHER, 1/4 lock, internal teeth 16116116116116116116II 16116 1611611611611611 16116

16 ISTD-1411 NUT, 1/4-20 plain 16116116116116116116II 16116 161161161161161t6116116

17 75906 GASKET, Rocker box cover 4 4 4 4

67193 GASKET, Rocker box cover 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

18 161247 COVER, Rocker box 4 4 4 4

68795 COVER ASSY., Rocker box 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 44

19 73966 SPACER, Fuelmanifold 2 3 2

20 ISTO-1925 SCREW, 1/4-20 x 5/8 long, p. hd.,

self-locking 32132132132132132 321321301 21132132130132132 132132 24124

3-7

~AVCO LYCOMING 1D, LID, HIO, T10, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


CYLINDER RELATED PARTS (Cont.)


LIO-360 TIG-380

FIQ. N1 I

PART 10-360 H10-360 AEIO-360

DESCRIPTIONNUMBER AC 0 0 0 0 0 0 J C A 6 0 0 0 E E F A A 6 H

L111111111111111111111ABCCDEFAEIAAABAABABEGA

18 L 666 66 DDD 6

STD-1925 SCREW, 1/4-20 x 5/8 long, p. hd.,

self-locking 24

21 STD-1916 SCREW, 1/4-20 x 1-1/8 long, p. hd.,

self-locking 2 3 2

22 71481 RING, Oil seal, 3/32 dia. x 4-27/32 10 4

23 74887 SPACER, 33/64 ID x 7/8 OD x

3/8 thick 2

24 1383-8 NUT, 3/8-24 plain 16

25 ISTD-2090 NUT, 1/2-20 plain 18

26 74494 PLATE, Spark plug reach caution 4 4 4 44

27 165321 GASKET, Exhaust flange 4 4 4 4 4 4

75118 GASKET, Exhaust flange 8 8 8 8 8 8 8 8 8 8 8


28 61260 FLANGE, Exhaust, stainless 4 4

67195 FLANGE, Exhaust 4 4 4 4 4

29 STD-35 WASHER, 5/16 plain 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

30 STD-475 WASHER, 5/16 lock, internalteeth 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

31 ISTD-1410 NUT,5/16plain 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

3-8

~AVCO LYCOM I NG 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOG


/i"h:ijc

~22B ,1o/$0/I~ a\i;i;l-:I’

i ii24

j’l\’11111illji/j ii~/´•, 7i27~i~’l///n

16 ~j

r8, ~IIi

´•(//II~ 13

14

15

11

i,

21 \1-2II1i ililii h-n

Q

.8 2

27

17

/loi~e%o 20

18

1~

17~

20.21


3-9

LYCI3MING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

CYLINDER, PISTON AND VAL\JE TRAIN



FIQ N LIO-360 TIG-360


NUMBER C C C C C C C J C A 6 C C D E E F A A B HLlllflllflllllltllll11

ABCCDEFAEIAAABAABABEGA1Q L 666 66 DDD 6

1 STD-684 NIPPLE, Straight, 3/8 ID hose 4

2 STD-1821 HOSE, 3/8 ID x 2-1/2 long 4 4 43 STD-2180 HOSE, 3/8 ID x 1-13/16 long 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

4 LW-I 5592-5-05 CLAMP, Hose 8

5 68759 TUBE ASSY., Cyl. head oil drain,

cyl. no. 1 1 1 168760 TUBE ASSY., Cyl. head oil drain,

cyl. no. 2 1 1 168761 TUBE ASSY., Cyl. head oil drain,

cyls. no. 3&4 2 2 272702 TUBE ASSY., Cyl. head oil drain,

cyl. no. 1 1 1 1 1 1 1 1 1 1 172703 TUBE ASSY., Cyl. head oil drain,

cyl. no. 2 1 1 1 1 1 1 1 1 1 1

74808 TUBE ASSY., Cyl. head oil drain,

cyl. no. 3 1 1 1 1 1 1 1 1 1 173027 TUBE ASSY., Cyl. head oil drain,

cyl. no. 4 1 1 1 1 1 1 1 1 1 1

75149 TUBE ASSY., Cyl. head oil drain,

cyl. no. 1 1 1 1 1 1 1 1 1 172703 TUBE ASSY., Cyl. head oil drain,

cyl, no. 2 1 1 1 1 1 1 1 1 175084 TUBE ASSY., Cyl. head oil drain,

cyl. no. 3 1 1 1 1 1 1 1 1 173027 TUBE ASSY., Cyl. head oil drain,

cyl. no. 4 1 1 1 1 1 1 1 1 16 75339 BAFFLE ASSY., Intercylinder 2 2 2

75338 BAFFLE ASSY., Intercylinder 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 1

75337 BAFFLE ASSY., Intercylinder 1 17 71611 RETAINER, Intercylinder baffle 2

8 71610 HOOK, Intercylinder baffle retainer 2

9 72834 COVER, Baffle, ignition cable hole 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 210 STD-692 SCREW, No. 10-32 x 1/2 long, rd. hd. 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 411 ISTD-670 NUT, No. 10-32 self-locking 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 412 AN931-12S17 GROMMET, 3/4 ID x 1-3/8 OD x

3/8 thick 1 113 65614 PLUG, Baffle attaching 4 4 3 4 4 3 4 4 4 314 ISTD-251 WASHER, No. 10 lock, internalteeth 4 4 3 4 4 3 4 4 4 315 1 STD-1686 SCREW, No. 10-32 x 7/16 long, fill, hd. 4 4 2 4 4 2 4 4 4 3

3-10

Q2698 g

7 C)n

~IO

j Ir’iii,jl;Q ~I% ~x!l I

cD I Iri r!;~3?1i ’IIIiiii

?\1 I

3ii I1

1(I jO

m 81’iO3

la7I

I I I I//i ZI i

i Oc,

F i

z

~-11 orm owv,

e I

/ii,o

zilj c,%!/

aiiiiii

O O

I: ,B m

r Va~

zn 5Ym

~10m Tu

;IrIII; D

-n Q)

O50

O~n

(F// o=amrz I~

o Fmz V)X

13

TITI v,r m 3Pm

(p, ~i= cno

r Pmi

PDr

Z OC: n

o I vr.oNi INe 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

IGNITION SYSTEM

DRIVES AND MAGNETOS



f IPART 10-380 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J C A BIC C D 6 E F A A B H

L111111111111111111111ABCCDEFAEAAIABAABABEGA

20 L 666 66 DDD 6

1 72495 GEAR, Magneto retard breaker 1 1 1 1 1 1 1

2 61163 GEAR, Magneto 1 1 1 1 1 1 1

3 62224 GASKET, Magneto 2 2 2 2 2

LW-I 2681 GASKET, Magneto 2 2 2

4 LW-15416 ADAPTER ASSY., Magneto drive 2

5 LW-14910 COUPLING, Magneto drive 2

6 LW-14230 CUSHION, Magneto drive 4

7 LW-1 2681 GASKET, Magneto 2

8 LW-1 63045-3 MAGNETO, S4LN-204 1

LW-163005-2 MAGNETO, Retard breaker, S4LN-200 2 2 1

LW-349305-1 MAGNETO, S4LN-1209 1 1 1

LW-349285-1 MAGNETO, Retard breaker, S4LN-1208 1 1

LW-349235-3 MAGNETO, Left, S4LN-1211 1

LW-349235-4 MAGNETO, Right, S4LN-1210 1

LW-349285-7 MAGNETO, Retard breaker, S4LN-1208 1 1 2 1

LW-163005-11 MAGNETO, Retard breaker, S4LN-200 2

LW-I 63045-3 MAGNETO, S4LN-204 1 1

LW-163005-11 MAGNETO, Retard breaker, S4LN-200 1 1

9 75965 LAMP, MognetP 4 4 4 4

10 STD-1727 WASHER, Plain, 3/4 OD x 21/64 ID x

1/8 thick 4 4 4 4 4

11 ISTD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4

12 STD-1410 NUT, 5/16-18 plain 4 4 4 4 4 4 4 4

13 LW-157209 KIT, Magneto ground terminal 2 2 2 2

LW-157208 KIT, Magneto retard terminal 1 1

LW-157208 KIT, Magneto retard terminal 2 2 2

4-1

L~IAVCO LYCOM I NG 10, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOG


Y:i~lIjai‘

"7~Is27

31,O ca~

84

5 M

Pt

197 t 13110

g

Figure 20. MACNETO DRIVES AND MAGNETOS

4-2

~IAVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

IGNITION SYSTEM

M~GNETO DRIVES AND MAGNETOS


LIO-360 TIG-360F~G. N

tPART 10-360 H10-380 AEIO-380

DESCRIPTIONNUMBER AC C 0 C C 0 C J C A B C C 0 6 6 F A A 6 H

LllllllllllllllltlllItABCCDEFAEAAABAABABEGA

21 L 666 66 DDD 6

1 61665 GEAR, Magneto, impulse coupling 1 1 1 1 1 1

2 61163 GEAR, Magneto 1 1 1 1 1 1 1

3 62224 GASKET, Magneto adapter 1 1 1 1 1 1 3

4 LW-12706 ADAPTER, Magneto, impulse coupling 1 1 1 1 1 1 1

5 LW-12681 GASKET, Magneto 2 2 2 2 2 2

6 LW-349305-1 MAGNETO, S4LN-1209 1 1 1 1

LW-349365-3 MAGNETO, Impulse coupling, S4LN-1227 1 1 1

LW-349305-3 MAGNETO, S4RN-1209

LW-349365-6 MAGNETO, Impulse coupling, S4RN-1227 1

LW-349365-9 MAGNETO, Impulse coupling, S4LN-1227 1 1 1 1 1

LW-349365-10 MAGNETO, Impulse coupling, S4RN-1227 1

LW-51360-29 MAGNETO, S4LN-20 1

LW-51360-54 MAGNETO, Impulse coupling, S4LN-21 1

7 75965 CLAMP, Magneto 4 4 4 4 4 4

8 STD-1727 WASHER, Plain, 3/4 OD x 21/64 10 x

1/8 thick 4

9 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4

10 ISTD-1410 NUT, 5/16-18 plain 4 4 4 4 4 4 4

11 I LW-52305-1 AS~., Magneto ground terminal 2

4-3

o I vcoiV1 I NG 10, Llo, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

r3

ai

i´•

1

4

\--3

7

j"i9s I 11

6

Figure 21. MAGNETO DRIVES AND MAGNETOS

4-4

~AVCQ LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOG


IGNITION SYSTEM

MAGNETO DRIVES AND MAGNETOS (DUAL MAGNETOS)


LIO-360 TIG-360

FIG. Nf I

PART 10-360 HIO-380 AEIO-360

DESCRIPTIONNUMBER AlclcTclcTcl-~e JICIA B C C D E E FIA A B H

Ltlllllltlllllllllll111ABCCDEFAEAAABAIABABEGA

22 LI I I Is 6 a s si I I I I ID D oi 1 16

1 LW-13643 GEAR, Retainer, magneto drive i I-TI I I 11 111 1 I I 1 1 1’1’11

2 LW-13641 Cushion, Magneto drive II I I I I I 1 121 1 I I I 1 121212

3 LW-1 2681 GASKET, Magneto II I I I I I 1 111 1 I I I 1 111’11

4 LW-385124-111 IMAGNETO, Ignition system, D4LN-2021 1 I I I I I I 1 111 1 I I 1 II

LW-382555-13 MAGNETO, Ignition II I I I I i 1 111 1 I I I I II

LW-684400-303 HARNESS, Ignition, 3/4-20 spark plug

term st. fittings I I I I II I I 111 I I I i I IILW-385124-124 IMAGNETO, Ignition system, D4LN-2021 j I I I I I I I I I I I I I 1 I 1

LW-382555-13 I I I I I I I I I I I I I j ItLW-684409-102 HARNESS, Ignition, 3/4-20 spark plug

term st. fittings I 1 1 I II I I I I I I I I I II

LW-685144-112 IMAGNETO, Ignition system, D4LN-3200 I I I I I I I I I I I I I I I 1 I II 1

1_\1\1-682605-13 MAGNETO, Ignition II I I I I I I I I I I I I I I III

LW-684409-106 i HARNESS, ignition, 3/4-20 spark plug

term st, fittings II II I I I I I I I I I i I I i 1 I 1

LW-685144-114 MAGNETO, Ignition system, D4LN-3200 i -I I I I I I I I I I I I 1 I I j II

LW-682605-13 MAGNETO, Ignition I I I I I I I I I I I I I I i I I It

LW-684412-106 1 HARNESS, Ignition, 3/4-20 spark plugterm. 900 fittings I I I I I 1 I I I I I I I 1 I I I II

5 75965 1 CLAMP, Magneto i I I I I I 1 121 1 I I I 1 121212

6 STD-475 ]WASHER, 5/16 lock, internal teeth I III 1111 121 1 I I 1 1 121212

7 STD-1410 NUT, 5/16-18 plain I 1 1 I I I I 1 121 1 I I i 1 1212)2

8 1182-04 1 SPARK PLUG, (Champion RHM-38E) I I I I I I I 1 18

1182-U5 1 SPARK PLUG, (Champion RHB-32E) 1 I I I I I I I I I I I I I I 1 8

1182-66 ISPARK PLUG, (Champion RHB-32P) I I I I I I I I I I I I I )81818

9 LW-157209 KIT, Magneto ground terminal I I I I I I I 1 121 1 I I I 1 12

LW-382698 KIT, Magneto ground terminal -1 ii I II I I I I I I I I I I 1 1212

LW-157208 KIT, Magneto retard terminal II1 1 I I I I I I I II I I I j I1I1

110-720631-48 LEAD ASSY., Replacement, 2T, 4T, 28,

48 1 I I I I I I I IU"I I I I 1 L IU"

110-720631-78 LEAD ASSY., Replacement, 1T, 3T, 1B,

38 1 I I I I I I I IU"1 Il I I i 1U"

110-720633-48 LEAD ASSY., Replacement, all bottom,

2T, jT, 4T I I I I]I I I I I 1 I I I I IU"

110-720633-78 LEAD ASv., Replacement, 1T 1 I I I I 1 I I I I I I I I I IU"

110-720633-48 LEAD ASSY., Replacement, all bottom,

2T, 4T I I III I I I i I I I I I I I lunlun

110-720633-78 1 LEAD ASSY., Replacement, 1T, 3T I I I I 1 I I I I I I I I j I I ju"lu"

110-620039-100 LEAD ASSY., Replacement, 3T 1 1 1 I I I I I I I I 1 I I I I I IU"

110-620039-104 LEAD ASSY_, Replacement, 1T 1 I I I I I I I I I I i I I I I I IU"

110-620039-58 LEAD ASSYI, Replacement, 48 1 II I I I I I I I I I I I i I I iU"

110-620039-74 LEAD ASSY., Replacement, 38, 2T, 4T I I I I II I j I I 1 I I I I 1 Iun

110-620039-72 LEAD ASSY., Replacement, 28 1 I I 1 I I I I I I I I I I I I 1 IU"

110-620044-84 LEAD ASSY., Replacement, 18 I I I I I I I I I I I I I I IU"

Replacement leads furnished with spark plug end assembled.

Lead includes eyelet and ferrule for assembly to magneto plate.

4-5

O I vr.OiVI I Nc 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

c.?,

´•jr n

i

1 \W2 rlc.~ />-I-,

76i? s

.)17

k

4r~Cr

’i

’I

1 ~8

Figure 22. MAGNETO DRIVES AND MAGNETOS (DUAL MAGNETOS)

4-6


IGNITION SYSTEM

MAGNETO DRIVES AND MAGNETOS

OUANTITY PER ASSEMBLVO


I 1PART 10´•380 HIO-380 AEIO-360

DESCRIPTIONNUMBER AC C C C 0 C C J C A B C C D 6 E F A A B H

Lllltlllllllllllllll11ABCCDEFAEAAABAABABEGA

23 L 666 66 000 6

1 61665 GEAR, Magneto, impulse coupling 1

61665 GEAR, Magneto, impulse coupling 2 2

2 STD-761 COTTER PIN, 3/32 dia. x 1.00 long 1

STD-761 COTTER PIN, 3/32 dia. x 1.00 long 2 2

3 61163 GEAR, Magneto 1

4 62224 GASKET, Magneto adapter magneto 1

62224 GASKET, Magneto adapter magneto 2 2

5 LW-12706 ADAPTER, Magneto, impulse coupling 1

LW-12706 ADAPTER, Magneto, impulse coupling 2 2

6 LW-12681 GASKET, Magneto 2 2

7 LW-15637 MAGNETO HARNESS ASSY., Left 1 1

LW-15638 MAGNETO, Left (Slick model 4251) 1 1

77745 HARNESS ASSY., Ignition, left 1 1

LW-15635 MAGNETO 8 HARNESS ASSY., Right 1

LW-15636 MAGNETO, Right (Slick model 4250) 1

77743 HARNESS ASSY., Ignition, right 1

LW-16591 MAGNETO HARNESS ASSY., Right 1 1

LW-15638 MAGNETO, Right (Slick model 4251) t 1

77743 HARNESS ASSY., Ignition, right 1 1

8 76961 CLAMP; Magneto 4 4

9 STD-475 WASHER, 5/16 lock, internalteeth 4 4

10 ISTD-1410 NUT, 5/16-18 plain 4 4

11 ISTD-1727 WASHER, Plain, 3/4 00 x 11/32 ID x

1/8 thick 4 4

12 76734 ZIP STRAPS 8 8

13 LW-14057 CLIP, One wire 2 2

14 ILW-14060 CLIP, Two wire 3 3

15 11182-83 SPARK PLUG, (Champion REM-40E) 8 8

lM-1735-41 LEAD ASSY., Replacement, 1T uniun

lM-1735-39 LEAD ASSY., Replacement, 2T un run

lM-1735-35 LEAD ASSY., Replacement, 3T uniun

lM-1735-32 LEAD ASSY., Replacement, 18, 4T uniun

lM-1735-33 LEAD ASSY., Replacement, 28 uniun

lM-1735-23 LEAD ASSY., Replacement, 38 uniun

lM-1735-26 LEAD ASSY., Replacement, 48 unlun

Replacement leads furnished with spark plug end assembled.Lead includes eyelet and ferrule for assembly to magneto plate.

4-7

Ico Lv~o rvl I ruG to, Lro, Hlo, Tlo, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

ri´•Ih

1

ao: r B;(j

7--\ B~1i.GI

(s-~ "4

11~~-4

;´•3 "7,11

i 7

FiRure 23, MAGNETO DRIVES AND MAGNETOS

4-8

I vclON1ING 10, LIO, HCO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

IGNITION SYSTEM

IGNITION HARNESS AND SPARK PLUGS (TIO-360)



I IPART 10-360 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J C A B 0 0 D E 6 F A A B H

Llllflllllllllllllll11ABCCDEFAEAAABAIABABEGA

24 L 666 66 000 6

LW-M-2427 HARNESS ASSY., Left magneto 1

2 LW-M-2428 HARNESS ASSY., Right magneto 1

3 LW-M-2375 PLATE, Spark plug cable 2

4 72351 SCREW, No. 10-32 self-locking 8

5 MS21919G7 CLIP, Turbo support 2

6 LW-14057 CLIP, One wire for 1/4 screw 2

7 LW-14060 CLIP, Two wire for 1/4 screw 8

8 MS21919-G12 CLIP, Shroud tube 2

9 73152 BRACKET, Straight 2


11 STD-692 SCREW, No. 10-32 x 1/2 long 4

12 STD-670 NUT, No. 10-32 self-locking 4

13 STD-1874 SCREW, 1/4-20 self-locking 4

14 STD-425 WASHER, No. 10 plain 2

15 lAN526-420-8 SCREW, 1/4-20 x 1/2 long 2

16 STD-2044 NUT, 1/4-20 self-locking 2

17 STD-696 WASHER, 1/4 plain un

18 76734 ZIP STRAPS 6

19 1182-K4 SPARK PLUG, (Champion RHB-36W) 8

1 LW-11944-72870-75 LEAD ASSY., Replacement, 1T, 2T un

1 LW-11944-48870-75 1 LEAD ASSY., Replacement, 3T, 4T un

I LW-11944-48S90-751 LEAD ASSY., Replacement, all bottom

leads un

lM-1869-48 LEAD ASSY., Replacement, all leads

except 1T, 2T un

lM-1867-72 LEAD ASSY., Replacement, 1T, 2T un

Replacement leads furnished with spark plug end assembled.


4-9

o I vnon/i I NG 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATA~OGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

IG~j\\i

nr\\

r(27~-´•´•1´•%

14

"7~~13

18

6,

3i’ 157u

~3d

4Figure 24. IGNITION HARNESS AND SPARK PLUGS (TIO-360)

4-10


IGNITION SYSTEM

IGNITION HARNESS AND SPARK PLUGS



EF PART 10-360 HIO-360 AEIO-360DESCRIPTION

NUMBER AC C C C C C C J C A B C C D 6 E F A A B H

Llllllllltllllllllft11ABCCDEFAEAAABAABABEGA

25 L 666 66 DDD 6

1 LW-M-2403 HARNESS ASSY., Left magneto 1 1 1 1

LW-M-2409 HARNESS ASSY., Left magneto 1 1

LW-M-2412 HARNESS ASSY., Left magneto 1

LW-M-2424 HARNESS ASSY.. Left magneto 1 1 1 1

2 LW-M-2404 HARNESS ASSY., Right magneto 1 1 1 1

LW-M-2410 HARNESS ASSY., Right magneto 1 1

LW-M-2413 HARNESS ASSY., Right magneto 1

LW-M-2425 HARNESS ASSY., Right magneto 1 1 1 1

3 LW-M-2375 PLATE, Spark plug cable 2 2 2 2´• 2 2 2 2 2 2 2

4 72351 SCREW, No. 10-32 self-locking 8 8 8 8 8 8 8 8 8 8 8

5 72815 BRACKET, Twist 2 2 2 2 2 2

6 77410 BRACKET, 900 1 1 1 1

7 LW-14057 CLIP, One wire for 1/4 screw 2 4 4 2 4 4

8 LW-14060 CLIP, Two wire for 1/4 screw 2 4 6 6 4 6 6 2 2 2 2

9 STD-8 WASHER, 1/4 plain 2 8 8 8 8 8 8 2 2 2 2

10 ISTD-1BO WASHER, 1/4 lock, internalteeth 2 1 1 1 1 2 2 2 2

11 I STD-1874 SCREW, 1/4-20 self-locking 4 4 4 4 4 4

12 LW-16266-25-50 CLAMP 2 2 2 2 2 2

13 STD-692 SCREW, No. 10-32 2 2 2 2 2 2

14 STD-670 NUT, No. 10-32 self-locking 2 2 2 2 2 2

15 STD-425 WASHER, No. 10 plain 2 2 2 2 2 2

16 AN500-416-18 SCREW, 1/4-20 x 1-1/8 long, fill. hd. 1 1 1 1 1 1 1 1 1

17 STD-1215 SCREW, 1/4-20 x 1-1/4 long 1 1 1 1 1

18 STD-1411 NUT, 1/4-20 plain 2 1 1 1 1 2 2 2 2

19 LW-13939 CLAMP, 1-5/8 I.D. 4 4 4

20 71910 CLAMP, 1-3/4 I.D. 4 4

21 ISTD-553 SCREW, No. 6-32 x 1/2 long, rd. hd. 4 4 4 4 4

22 IAN365-632C NUT, No. 6-32 self-locking 4 4 4 4 4

23 STD-696 WASHER, 1/4 plain unlunlunlunlun un on lunlun

24 76734 ZIP STRAP 2 8 4 4 8 4 4 2 2 4 2

25 11182-05 SPARK PLUG, (AC SR-93) 8 8 8 8 8

1182-J3 SPARK PLUG, (Champion REM-38E) 8 8 8 8 8 8 8

1182-N3 SPARK PLUG, (Champion REM-38P) 8

176923-48890-63 LEAD ASSY., Replacement, all top leads unlun

176923-48S70-63 LEAD ASSY., Replacement, all bottom

leads uniun

176923-48S70-63 LEAD ASSY., Replacement, all top leads un

76923-488110-63 LEAD ASSY., Replacement, all bottom

leads un

176923-48590-63 LEAD ASSY., Replacement, all top leads un

176923-723110-63 LEAD ASSY., Replacement, 1B, 28 un

176923-488110-63 LEAD ASSY., Replacement, 38, 48 un

176923-48890-63 LEAD ASSY., Replacement, all leads on un

176923-728110-63 LEAD ASSY., Replacement, all top leads un on un

4-11

LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOG


IGNITION SYSTEM

IGNITION HARNESS AND SPARK PLUGS (Cont.)


LIO-360 TIG-360

FIG,I I IN t IPART 10-360 H10-360 AEIO-380

DESCRIPTIONNUMBER A CICICIC 0 CICIJICIA BICICIDIE E FIAIA 6111

L 11111 111 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

A 6 0 0 D E F A EIA A A B AIA B A 6 E 0 A

25 1 ILI I 1 1616 61 16161 1 I I I ID DIDI 1 16

176923-48590-63 LEAD ASSY., Replacement, all bottom

leads I I I lunl I IU" U"

lM-1985-48 LEAD ASSY., Replacement, all leads II IU"I I IU"I I I I I IU"IU"IU"

1 M-1985-48 ILEADASSY., Replacement, bottom leads I I I IUnlU"I IU"I I IU"

lM-1985-72 LEAD ASSY., Replacement, top leads I I I IUnlU"I IU"I I IU"

’-Replacement leads furnished with spark plug end assembled.


/7u--;-

25

113419/-11

si15sQ

i\

12~\17B6 P

8\_211~22

Figure 25, IGNITION HARNESS AND SPARK PLUGS

4-12

I vr´•OIV1ING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

IGNITION SYSTEM

IGNITION HARNESS (SCINTILLA) AND SPARK PLUGS




NUMBER AC C C C C C C J C A 6 C C D E E F A A 6 H


26 L 666 66 DDD 6

1 LW-720410-3 HARNESS ASSY., Ignition 1 1

LW-720510-1 HARNESS ASSY., Ignition 1 1

LW-720510-4 HARNESS ASSY., Ignition 1

2 72351 SCREW, No. 10-32 self-locking 8 8

3 65614 PLUG, Baffle attaching 1 1

4 STD-251 WASHER, No. 10 lock, internal teeth 1 1

5 STD-969 SCREW, No. 10-32 x 1/2 long, fill, hd. 1 1

6 AN500-A416-10 SCREW, 1/4-20 x 5/8 long, fill, hd. dr.

hd. 4 4 4

7 STD-1874 SCREW, 1/4-20 x 7/8 long, fill. hd.,

self-locking 4 4 4 4 4

8 STD-696 WASHER, 1/4 plain, (thin) un un un un un

9 1182-J3 SPARK PLUG, (Champion REM-38E) 8 8 8 8

1182-N3 SPARK PLUG, (Champion REM-38P) 8 8

1182-N4 SPARK PLUG, (Champion REB-37E) 8

110-720632-48 LEAD ASSY., Replacement, all leads un un un un un

Replacement leads furnished with spark plug end assembled.Lead includes eyelet and ferrule for assembly to magneto plate.

03

e

v

Oi, e

Figure 26. IGNITION HARNESS (SCINTILLA) AND SPARK PLUGS

4-13

L~7AVe0 LYCOMING 1C, UO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

ELECTRICAL SYSTEM

ALTERNATOR AND GENERATOR MOUNTING BRACKETS

QUANTITV PER ASSEMBLYO


1 1EF PART 10-360 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J C A 6 C C D E E F A A B H

L 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

ABCCDEFAEAAABAABABEGA

27 L 666 66 DDD 6

1 70419 BRACKET, Generator 2 2 2 2 2

2 74324 BRACKET, Alternator 1 1 1 1 1

LW-13039 BRACKET, Alternator 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-10382 BRACKET, Alternator 1 1

3 73383 LOCKPLATE, 5/16 bolt x 1.00 spacing 2 2 2 2 2

73383 LOCKPLATE, 5/16 bolt x 1.00 spacing 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4 STD-1838 BOLT, 5/16-18 x 15/16 long, hex. hd. 4 4 4 4 4

STD-1838 BOLT, 5/16-18 x 15/16 long, hex, hd. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

5 76028 LINK, Generator adjusting 1 1 1 1

6 74325 LINK, Alternator adjusting 1 1 1 1

75380 LINK, Alternator adjusting 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

7 STD-35 WASHER, 5/16 plain 1 1 1 1 1 1 1 f 1 1 1 1 1 1 1 1 1 1

8 LW-31H.75 BOLT, 5/16-18 x 3/4 long, hex hd. dr. 1 i 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9 STD-1727 WASHER, Plain, 3/4 O.D. x 11/32 I.D. x

1/8 thick 1 1 1 1 1 1 1 1 t 1 1 1 1 1 1 1 1 1 1 1

10 LW-31H.75 BOLT, 5/16-18 x 3/4 long, hex. hd. dr. 1 t 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

11 174323 STRUT, Alternator support 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 f 1 1

12 ISTD-1851 BOLT, 5/16-18 x 1-5/32 long, dr. end 2 2 2 2 2

13 ISTD-35 WASHER, 5/16 plain un un iun iun iun

14 ISTD-1420 NUT, 5/16-18 slotted 2 2 2 2 2

15 ISTD-68 PIN, 1/16 dia. x 1/2 long, cotter 2 2 2 2 2

16 ILW-31H.75 BOLT, 5/16-18 x 3/4 long, hex. hd, dr. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

17 ISTD-690 WASHER, 13/16 O.D. x 25/64 I.D. x

1/16 thick 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18 AN6-32 BOLT, 3/8-24 x 3-21/64 long, hex. hd.

dr. 1 1 1 1 1

19 AN6-14 BOLT, 3/8-24 x 1-37/64 long, hex. hd.

dr. 11 111111 1111111111

20 ISTD-690 WASHER, 13/16 O.D. x 25/64 I.D. x

1/16 thick un run un iun un run run run run run run run run run run run run

21 ISTD-872 NUT, 3/8-24 slotted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

22 ISTD-713 PIN, Cotter, 3/32 dia. x 3/4 long 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23 AN6-13 BOLT, 3/8-24 x 1-7/16 long, hex, hd.,

dr. 1 1 1 1 1 1 1 1 1

24 AN6-16 BOLT, 3/8-24 x 1-53/64 long, hex, hd.,

dr. 1 1 1 1 1 1 1 1 i 1

25 176534 SHIM, 1-1/8 O.D. x 13/32 I.D. x .005

thick uniun unlunlunlunlunlunlun uniunlunlunlunlunlunlunlun

26 STD-690 WASHER, 13/16 O.D. x 25/64 I.D. x

1/16 thick unlun unluniunlunlunlunlunlunluniunlunluniunlunlunlunlun

27 STD-872 NUT, 3/8-24 slotted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

28 STD-713 PIN, Cotter, 3/32 dia. x 3/4 long 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5-1

~AVCO LYCOM I NG 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOG


Q

4~1

d17

\-163 5,

:-I

:a

14 2 j13 20 j/.

29

~W V-/W ’23,24

~-22.28

Figure 27. ALTERNATOR AND GENERATOR MOUNTING BRACKETS

5-2

~AVeO LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

ELECTRICAL SYSTEM

ALTERNATORS, ’GENERATORS, REGULATORS AND DRIVE BELTS



I IPART 10-380 HIO-360 AEIO-380

DESCRIPTIONNUMBER AC C C C C C C J C A BIC C D E E F A A 6 H

L111111111111111111111ABCCDEFAEAAIABAABABEGA

28 L 668 66 DDD 6

1 LW-10979 ALTERNATOR ASSY., 24V.-100 Amp.,3.25:1 ratio 1

75220 ALTERNATOR ASSY., 24\1.-50 Amp.,3.25:1 ratio 1 1

76165 ALTERNATOR ASSY., 12V.-70 Amp.,2.50:1 ratio 1 1

76167 ALTERNATOR ASSY., 24V.-50 Amp.,2.50:1 ratio 1

74880 ALTERNATOR ASSY., 12V.-70 Amp.,3.25:1 ratio 1 1

LW-14316 ALTERNATOR, 12V.-70 Amp., 3.25:1

ratio, externally grounded 1 1 1 1 1 1 1 1

LW-14319 ALTERNATOR, 24\1.-50 Amp., 3.25:1

ratio, externally grounded 1 1

LW-14324 ALTERNATOR, 24\1.-70 Amp., 3.25:1

ratio, externally grounded 1

LW-I 4308 ALTEANATOR, 12V.-60 Amp., 3.25:1

ratio, externally grounded 1 1 1 1 1 1 1

LW-14353 ALTERNATOR ASS.Y., 12V.-70 Arnp.2.50:1 ratio 1 1 1

LW-14357 ALTERNATOR ASSY., 24\1.-70 Arnp.,2.50:1 ratio 1 1 1

LW-12832 ALTERNATOR ASSY., 12V.-60 Amp.,3.25:1 ratio 1

2 68767 GENERATOR, 12\1.-35 Amp. 1 1

71744 GENERATOR, 12V.-50 Amp. 1 11

3 60886 BELT, Generator drive 1 1 1 1 1

76026 BELT, Alternator drive, (3/8 wide) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

76157 BELT, Alternator drive, (3/8 wide) 1 1 1

4 72205 REGULATOR, Voltage, 12V.-20 Arnp. 1

62833 REGULATOR, Voltage, 12\1.-35 Arnp. 1 1

71745 REGULATOR, Voltage, 12V.-50 Arnp. 1 1 1 1

74292 REGULATOR, 12V., full transistor 1 1 1

74291 REGULATOR, 12V., full transistor 1 1

LW-10185 REGULATOR, 12V., full transistor 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-10179 REGULATOR, 24V., full transistor 1 1 1 1 1

LW-15895 REGULATOR, 12V., full transistor 1

5 74804 RELAY, Overvoltage, 24V. 1 1 1

74661 RELAY, Overvoltage, 12V. 1 1

78059 RELAY, Overvoltage, 12V. 1 1 1 1 1 1 1 1 1 1 1 1

78060 RELAY, Overvoltage, 24V. 1 1 1 1 1

5-3

~IAVCO LYCOM I NG 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

Il RII

(3

Figure 28. ALTERNATORS, GENERATORS, REGULATORS AND DRIVE BELTS

5-4


ELECTRICAL SYSTEM

STAR~ING MOTOR AND MAGNETIC SWITCH


LIO-360 TIG-360FIG N

t 1EF PART 10-380 HIO-380 AEIO-380

DESCRIPTIONNUMBER AC 0 C 0 C 0 C J C A 6 0 C 0 6 E F A A B H

Llllllllltllllllllll11ABCCDEFAEAAA8AABABEGA

2Q L 666 66 000 6

1 LW-1 5571 STARTER, 12V., 3.38:1 internal

reduction, 12/14 pitch pinion 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LW-14215 STARTER, 12V., 3.38:1 internal

reduction, 12/14 pitch pinion 1

LW-1 5573 STARTER, 12V., 3.38:1 internal

reduction, 12/14 pitch pinion 1 1 1







2 STD-35 WASHER, 5/16 plain 4 4 4 4 4 4 4 4 4 3 3 4 4 3 4 4 4 4 4

STD-35 WASHER, 5/16 plain 2 2 2

3 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

4 STD-2156 BOLT, 5/16-18 x 1-5/32 long, hex. hd. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5 STD-1889 BOLT, 5/16-18 x 1-7/32 long, hex. hd. 2 2 2

6 STD-1727 WASHER, 5/16 x 1/8 thick 2 2 2

7 STD-1410 NUT, 5/16-18plain 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

8 STD-1420 NUT, 5/16-18 slotted 1 1 1

9 LW-12083 SWITCH, Magnetic, (SAZ-4201E-1) 1 1 1 1 1 1 1 1 1 1 f 1 1 1

LW-1 2085 SWITCH, Magnetic, (SAZ-4401C-1) 1 1 1 1

LW-1 2086 SWITCH, Magnetic, (SAZ-4401-1) 1 1

5-5

o I vnolVI ING 10, LIO, MIG, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

~n /lo

S

I

o

1~ 8

iv,

~-G(i

6

4.5

7.8

Figure 29. STARTING MOTOR AND MAGNETIC SWITCH

5-6

Lj~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

OIL SUMP AND INDUCTION SYSTEM


QUANTITY PER ASSEMBLVO


i 1PART 10-360 HIO-380 AEIO-380

DESCRIPTIONNUMBER AC C C C C C C J C A BIC C O 6 E F A A B H

L111111111111111111111A B C C D E F A EIA AIA B AIA B A B E G A

L 666 66 DDD 6

1 LW-13353 GASKET, Oil sump 1

2 76808 SUMP ASSY., Oil 1

74384 SUMP ASSY., Oil 1

LW-12754 SUMP ASSY., Oil 1 1 1 1 1 1 1 1 1 1 1

77528 SUMP ASSY., Oil 1

LW-12618 SUMP ASSY., Oil 1

LW-13864 SUMP ASSY., Oil 1

LW-13861 SUMP ASSY., Oil 1 1

LW-14439 SUMP ASSY., Oil 1 1 1

3 69602 CONNECTION, Intake pipe 4 4 4 4

78914 CONNECTION, Intake pipe 4 4

4 61400 STUD, 1/4-20 x 1-3/16 long 6 6 6 6 6 6 6 6 6 6 4 6 6 6 4 4 4 6 6 4 4

5 310-14 STUD, 5/16-18 x 1-3/4 long 4 4 4 4 4

6 31C-12 STUD, 5/16-18 x 1-1/2 long 4 4 4 4 4 4 4 4 4 4 4 4 4

7 310-17 STUD, 5/16-18 x 2-1/8 long 4 4

8 310-22 STUD, 5/16-18 x 2-3/4 long 2

9 310-25 STUD, 5/16-18 x 3-1/8 long 2

10 310-27 STUD, 5/16-18 x 3-3/8 long 2

11 1102 PLUG, 1/8-27 NPT, Alien hd. 2 2 2 1

12 ISTD-91 PLUG, 1/2-14 NPT, Alien hd. 1 1

13 STD-111 GASKET, 1.00 I.D. x 1-1/4 O.D. x 3/32

annular 1

14 169335 PLUG, 1.00-20 thd., 5/8 hex, hd. 1

15 ISTD-551 PLUG, 1/2-14 NPT, so. hd., dr. 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 2 1 3 4 4

16 STD-8 WASHER, 1/4 plain 26126126126126126126126 26127 26126128128128126126128128

17 ISTD-1BO WASHER, 1/4 lock, internal teeth 20120120120120120120120 20119 20120120120120120120120120

18 STD-1204 BOLT, 1/4-20 x 15/16 long 14114114114114 114114112114114 7114114114 8 8 8114112114114

19 STD-1419 BOLT, 1/4-20 x 1-1/8 long, hex, hd. 2

20 ISTD-1411 NUT, 1/4-20 plain 12112112112112112112112112112117112112112118118118112112112~12


22 ISTD-1215 BOLT, 1/4-20 x 1-1/4 long, hex. hd. 1

23 IAN365-420C NUT, 1/4-20 self-locking 1

24 70484 SCREEN, Oil suction 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 111

25 STD-111 GASKET, 1.00 I.D. x 1-1/4 O.D, x 3/32

annular 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

26 LW-12545 PLUG, 5/8 hex, hd, x 1.00-20 thd. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

27 61548 NAMEPLATE 1

28 ISTD-1901 DRIVE STUD, No. 4 x 3/16 long, rd. hd. 4

6-1

I vr´•OiV1INe 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

~i a~r3

o o

~S1

20

I

I;L.

~ch, 27

3,25

/J~22P14.26

16

/Ob

I~ 4

"?1

~.9T\

a

O ~j-*C

8,9 ii.

Figure 30. OIL SUMP ASSEMBLY AND OIL SUCTION SCREEN

6-2

Lj~AVCO LYCOMING 1D, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


INTAKE PIPES

QUANTITV PER ASSEMBLVO

LIO-380 TIG-360N


NUMBER AC C C C C C C J C A B C C D E E F A A B H


31 L 666 66 DDD 6

1 77569 SEAL, Intake pipe 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2 70485 PIPE, Intake 4 4

71712 PIPE, Intake, no. 1 2 cyls. 2

71713 PIPE, Intake, no. 3 4 cyls. 2

78741 PIPE, Intake, no 1 cyl. 1 1

78742 PIPE, Intake, no. 2 cyl. 1 1

78743 PIPE, Intake no. 3 cyl. 1 1

78744 PIPE, Intake, no. 4 cyl. 1 1

78981 PIPE, Intake, no. 1 cyl. 1 1 1 1 1

78982 PIPE, Intake, no. 2 cyl. 1 1 1 1 1 1


78984 PIPE, Intake, no. 4 cyl. 1 1 1 1 1

79001 PIPE, Intake, no. 1 cyl. 1




LW-10481 PIPE, Intake, no. 1 cyl. 1 1 1 1 1



LW-11281 PIPE, Intake, no. 1 cyl. 1












LW-13107 PIPE, Intake, no. 1 cyl. 1 1 1




3 69603 HOSE, 1-3/4 I.D, x 2-3/16 O.D. x

1-3/4 long 4 4 4 4 4 4

4 LW-15592-8-28 CLAMP, Hose 8 8 8 8 8 8

5 LW-12620 RING, Seal, intake pipes 4

6 71973 GASKET, 2 bolt flange, 1-7/8 1.D. 4

7 73346 FLANGE, Intake pipe, upper 4 4 4

8 STD-8 WASHER, 1/4 plain 8



11 74139 ADAPTER ASSY., Fuel drain valve 2 2 2 2 2 2

6-3

I vnOlV1INe 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


INTAKE PIPES (Cont.)

OUANTITY PER ASSEMBLY

LI0-360 TIG-360FIG. N

PART 10-360 HIO-360 AEIO-360

DESCRIPTIOMNUMBER 0 0 0 C 0 0 0 J CA 610 0 0 E E F A A B H

Llllllflllllllllllll11ABCCDEFAEAAABAABABEGA

31 L 666 66 000 6

75444 ADAPTER ASSY., Fuel drain valve 2 2 2 2

LW-13807 ADAPTER ASSY., Fuel drain valve 3 33

12 1102 PLUG, 1/8-27 NPT, Alien 2 2 6 6 2 2 2 2

1102 PLUG, 1/8-27 NPT, Alien 4 4 4 4 4 4 4 4 4

37 I

87~\ ~4

341

r

ifs’li:

-I:I!O) I~b

ui

It

a

Figure 31. INTAKE PIPES

6-4

~AVC=O LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL INJECTORS, FUEL MANIFOLDS AND INJECTION NOZZLES



1PART 10-380 HIO-380 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J C A B C C O E E F A A B H

Lllllllllllllllllllt11ABCCDEFAEAAABAABABEGA

32 L 666 66 DDD 6

t 66224 GASKET, Fuel injector 1 2 122

2 73161 SPACER, Fuel injector74842 SPACER, Fuel injector 1

3 74556 FUEL INJECTOR 1

73937 FUEL INJECTOR 1 1

76703* FUELINJECTOR 1

LW-10020* FUEL INJECTOR 1

LW-14382 FUEL INJECTOR 1

LW-1 5971 FUEL INJECTOR 1 1

LW-1 5664 FUEL INJECTOR 1

LW-18111 FUEL INJECTOR

4 STD-35 WASHER, 5/16 plain 4 6 4 4 4

5 STD-1410 NUT, 5/16-18 plain 4 4 4 4 4

6 STD-1763 LOCKNUT, 5/16 palnut 4 4 4 4 4

7 LW-18265 NOZZLE, Injection 4 4 4 4 4

LW-18267 NOZZLE ASSY., Manifold air bleed 4 4 4

8 75095 DIVIDER, Fuel manifold 1

9 MS29512-4 SEAL, Oil 1/16 dia. section x 11/32 I.D. 1

10 AN833-4 ELBOW, 1/4 flared tube, bulkhead, 900 1

11 IAN924-4 NUT, Flared tube, bulkhead 1

12 ILW-12074 BRACKET, Flow divider 1

13 75280 MANIFOLD ASSY., Fuel 1

75279 MANIFOLD ASSY., Fuel 1 i



75278 MANIFOLD ASSY., Fuel 1 11

LW-15533 MANIFOLD ASSY., Fuel

14 IMS20822-4 ELBOW, 1/4 tube, 1/8 NPT, 900 1 1 1 1 1

15 IMS20823-4 ELBOW, 1/4 tube, 1/8 NPT, 450 1

16 IAN791-2 ELBOW, Union, 450, 1/8 tube 4 4

17 ISTD-2166 ELBOW, Union 1

18 ISTD-148 NIPPLE, Union, 1/8 NPT 4 4

AN780-2 NIPPLE, Union, 1/8 NPT 4 3

19 75447 NIPPLE, 3/16 tube to 1/8 NPT,

(restricted) 1 1 1

20 AN816-4 NIPPLE, 1/4 tube, 1/8 NPT 1 1 1

21 LW-12604 NIPPLE, 1/8 tube to 1/8 NPT,

(restricted) 1 1

22 IAN932-2 PLUG, 1/8-27 NPT 2 2

23 1102 PLUG, 1/8-27 NPT, Alien 2 2 2 2 2 2 2

24 73966 SPACER, Fuel manifold bracket 2 2

25 174597 BRACKET, Fuel manifold 1

74598 BRACKET, Fuel manifold 1 1

75009 BRACKET. Fuel manifold 1 1 1 1

26 STD-1907 SCREW, No. 10-24 x 9/16 long, flat hd. 4 4

6-5


Oil SUMP AND INDUCTION SYSTEM

FUEL INJECTORS, FUEL MANIFOLDS AND INJECTION NOZZLES (Cont.)


FIG, N LIO-380 TIG-360


NUMBER AC 0 C 0 0 0 0 J 0 A B 0 0 0 6 6 F A A B H

Lllllltlllllllllllll11ABCCDEFAEAAABAABABEGA

32 L 666 66 000 6

27 ISTD-1908 WASHER, No. 10 lock, ex. teeth. 820 4 4

28 STD-251 WASHER. No. 10 lock, internalteeth 4 4 4 4 4 4

29 ISTD-82 SCREW, No. 10-24 x 1/2 long, rd. hd. 4 4 4 4 4 4

30 STD-160 WASHER, 1/4 lock, internal teeth 1 1 f 1

31 LW-25-.50 BOLT, 1/4-20 x 1/2 long, hex. hd. 1 1 1

76703 and LW-10020 fuel injectors have the fuel inlet fittings on

opposite sides.

4

6 i/ oo~ ~zy

3_\111-G~ 3’" ;s=97

oc

0 1

\-2

118,21

~‘414,15 /-31o 137

O

17

I~ 22,23ao

25 4"2829

Figure 32, FUEL INJECTORS, FUEL MANIFOLDS AND INJECTION NOZZLES

6-6

~AVCO LYCOMING 1D, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL INJECTORS, FUEL MANIFOLDS AND INJECTION NOZZLES



IPART IC;´•380 HIO-360 AEIO-380

IDESCRIPTIONNUMBER AC C C C C C C J C A B C C 0 E 6 F A A B H

L111111111111111111111AB ~EFAEAAABAABABEGA

33 L bi6 6 6 6 D D 0 6

1 73032 GASKET, Fuel injector elbow 1 1 1 1 1 1 1 1 1 1 1 1 1

2 74849 ELBOW ASSY., Fuel injector 1

77895 ELBOW ASSY., Fuel injector 1

LW-10493 ELBOW ASSY., Fuel injector 1 1 1 1 1 t

3 310-12 STUD, 5/16-18 x 1-1/2 long 2 2

4 310-14 STUD, 5/16-18 x 1-3/4 long 2 2 2 2 2 2 2

5 310-15 STUD, 5/16-18 x 1-7/8 long 2 2 2 2 2

6 75130 ADAPTER ASSY., Fuel injector 1 1 1 1 1

77822 ADAPTER ASSY., Fuel injector7 310-12 STUD, 5/16-18 x 1-1/2 long 4 4 4 4 4

8 STD-1373 INSERT, 5/16-18 Heli-coil x 15/32

long 4

9 STD-35 WASHER, 5/16 plain 4 4 4 4 4 4 4 4 4 4 4 4 4

10 STD-475 WASHER, 5/16 lock, internalteeth 4 4 4 4 4 4 4 4 4 4 4 4 4

11 ISTD-1410 NUT, 5/16 plain 4 4 4 4 4 4 4 4 4 4 4 4 4

12 166224 GASKET, Fuel injector 1 1 1 1 1 1 1


13 73161 SPACER, Fuel injector elbow 1 1 1 1 1

14 177194 RJEL I´•~ECTOR 1

74847 FUEL INJECTOR f 1 1 1

77885 FUEL INJECTOR 1

77920 FUEL INJECTOR 1

LW-10409 FUEL INJECTOR 1 1 1

LW-12586 FUELINJECTOR 1 1

LW-12643 FUEL INJECTOR 1

15 ISTD-35 WASHER, 5/16 plain 4 4 4 4 4 4 4 4 4 4 4 4 4

16 STD-1410 NUT, 5/16-18 plain 4 4 4 4 4 4 4 4 4 4 44

17 ISTD-1763 LOCKNUT, 5/16 palnut 4 4 4 4 4 4 4 4 4 4 44


19 STD-1902 BOLT, 5/16-18 NC-3 x 1.00 long, hex.

hd. 4

20 LW-18265 NOZZLE, Injection 4 4 4 4 4 1 1 4 4 4 4

LW-18267 NOZZLE ASSY., Manifold air bleed 4 4

21 MS29512-6 SEAL, Oil, 5/64 dia. section x 15/32 I.D 1

22 AN893-2 Reducer, Straight thd., 3/8 to 1/4 tube 1

23 IMS29512-4 SEAL, Oil, 1/16 dia. section x 11/32 I.D 1 1

24 IAN924-4 NUT, Flared tube bulkhead 1

25 75095 DIVIDER, Fuel nozzle line 1 1

26‘ 75278 MANIFOLD ASSY., Fuel 1 1 1 1 1

77548 MANIFOLD ASSY., Fuel 1 1

78805 MANIFOLD ASSY., Fuel 1 1 1 1


27 AN816-4 NIPPLE, 1/4 tube 1/8 NPT 1 1 1 1 1 1 1 1 1 1

28 STD-2166 ELBOW, Union 1 1 1 1 1

29 STD-148 NIPPLE, Union, 1/8 NPT 3 3 3 3 3

6;7

~AVCO LYCOM I NG 1G, LIO, HIQ, TIG, AEIC-360 SERIES PARTS CATALOG



FUEL INJECTORS, FUEL MANIFOLDS AND INJECTION NOZZLES (Cant.)

OUANTITV PER ASSEMBLY

LIO-360 TIG-380FIG, N

tPART 10´•360 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C 0 0 0 0 0 J 0 A B C C 0 6 6 F A A B H

L111111111111111111111ABCCDEFAEAAABAIABABEGA

33 L 666 66 000 6

STD-148 NIPPLE, Union, 1/8 NPT 4 4 4 4 4 4 4

30 1102 PLUG, 1/8-27 NPT, Alien 2 2 2 2 2 2 2 2 2 2 2

31 LW-12604 NIPPLE, 1/8 tube to 1/8 NPT,

(restricted) 1 1 1 1 1 1

32 75447 NIPPLE, 3/16 tube to 1/8 NPT,

(restricted) 1 1 1 1 1

33 77915 ELBOW, 3/16 tube to 1/8 NPT,

(restricted) 1

34 175009 BRACKET, Fuel manifold 1 1 1 1 1

77547 BRACKET, Fuel manifold 1 1 1 1 1 1

lock, internalteeth 4 4 4 4 4 4 4 4 4 4 435 STD-251 WASHER, No. 10

36 ISTD-82 SCREW, No. 10-24 x 1/2 long, rd. hd. 4 4 4 4 4 4 4 4 4 4 4

137 STD-1BO WASHER, 1/4lock, internal teeth 1 1 1 1 1 1 1 1 1 1

38 LW-25-.50 BOLT, 1/4-20 x 1/2 long, hex. hd. 1 1 1 1 1 1 1 1 1 1 1

r

~31, 32.33

87 7 t’fi i/-6 I~ I

297F~P ~i,.I-:

24

"ii17716118

/IrZZ, 311

U\

2 ic,i

i r87j3,4.5

!I"ii

~-sa

O

2 A14-/g ~o

io11

cr,

Figure 33, FUEL INJECTORS, FUEL MANIFOLDS AND INJECTION NOZZLES

6-8

~AVCO LYCOMING 10, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL LINES, FUEL HOSES AND ATTACHING PARTS



tPART 10-360 HIO-380 AEIO-380



34 L 666 66 DDD 6

1 LW-12798-4S130 HOSE, Injectortoflow divider 1

2 LW-12098-0-140 TUBE ASSY., Fuel manifold to nozzle,

cyls. 2&4 2 2 2 2 2 22

LW-12098-0-200 TUBE ASSY., Fuel manifold to nozzle,

cyls. 1&3 2 2 2 2 2 2 22


cyls. 1&4 2


cyl. 2 1


cyl. 3 1


cyls. 2&4 2

LW-12098-0-170 TUBE ASSY., Fuel manifold 4 43 76868 BRACKET, Support clamp 1

73152 BRACKET, Support clamp 2

4 LW-16266-10-75 CLAMP 4 4 4 4 4 4 4 4 8 8

LW-16266-10-13 CLAMP 6 6 6 6 6 6 6 6 8 8

LW-16266-25-25 CLAMP 17

5 STD-860 SCREW, No. 10-32 x 5/8 long, fill, hd. 6 6 6 6 6 6 6 6 8 8

6 STO-692 SCREW, No. 10-32 x 7/8 long, fill. hd. 7

7 STD-670 NUT, No. 10-32 self-locking 6 6 6 6 7 6 6 6 6 8 88 73136 BRACKET, 900 2 2 2 2 6 2 22

9 LW-16562 NIPPLE, 3/8 fl. tube to 9/16-18 st. thd. 1 1 1 1

10 ISTO-1084 SCREW, 1/4-28 fill. hd., 5/8 long 1

11 iSTD-673 NUT, 1/4-28 self-locking 1

12 ISTD-425 WASHER, No. 10 plain 14

13 74070 ELBOW, 3/8 tubing adjustable, 450 1 1

14 IMS20822-6 ELBOW, 3/8 fl. tube 1/4 NPT, 900 2

5,6r\

7

iTZ

6~3

4

,Ja

a14

A ,J‘~´•FiRure 34, FUEL LINES, FUEL HOSES AND ATTACHING PARTS

6-9

~TAVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOG




QUANTITY PER ASSEMBLYQ

LIO-360 TIG-360

FIG.I I INPART 10-360 HIO-360 AEIO-380

DESCRIPTIONNUMBER A1~7cTe c c c c J c A a c c o 6 E FIA A B H


35 LI I I Is 6 a sisi I I I I io o D a

1 LW-12098-0-170 TUBE ASSY., Fuel manifold 1 1 1 I I I I I I I I I I I I I 1 I I I 1 14


cyls. 1&3 11 I I I I I 1 121 1 I I 1 I I i I 1 12LW-12098-0-200 TUBE ASSY., Fuel manifold to nozzle,

cyls. 2&4 1 1-1-1 i I I I 1 121 1 I I I i I I I 1 12LW-12098-3-320 TUBE ASSV., Fuel manifold to nozzle,

cyl. 1 i I I I I I I I i I IILW-12098-4-390 TUBE ASSY., Fuel manifold to nozzle,

cyl. 2 1 I i I 1 I I I I I I 1


cyl. 3 1 I i I I I I 1 I I IILW-12098-3-334 TUBE ASSY., Fuel manifold to nozzle,

cyl. 4


cyls. 1&3 2 2 21 1 I I I 1 122


cyls. 2&4 1 12121 1 121 1 j I I 1 1212LW-12098-4-310 TUBE ASSY., Fuel manifold to nozzle,

cyl. 1 lil I I I I I I I I IILW-12098-4-350 TUBE ASSY., Fuel manifold to nozzle,

cy1.2 I I I I I I I I I I I I’LW-12098-3-240 TUBE ASSY., Fuel manifold to nozzle,

cyl. 3 1 I 1 I I I I I I I I IILW-12098-3-310 TUBE ASSY., Fuel manifold to nozzle,

cyl. 4 1 I I I I I I I I I I IILW-12098-4-350 TUBE ASSY., Fuel manifold to nozzle,

cyl. 1 I I 1LI I I I I I I I I I IILW-12098-4-412 TUBE ASSY., Fuel manifold to nozzle,

cyl. 2 LI I I I I I I I I II I I I IILW-12098-2-296 TUBE ASSY., Fuel manifold to nozzle,

cyl. 3 1 I III I I I I I I I I I IILW-12098-4-390 TUBE ASSY., Fuel manifold to nozzle,

cyl. 4 1 I III I I I I I I I I I I’LW-12098-0-140 TUBE ASSY., Fuel manifold to nozzle,

cyls. 2&4 1 I 1 ]2 21 1 I I I I I 1 121 1 I 1 12


cyls. 1&3 I_11 1 121"1 1 I I I I I 1 121 1 I i 122 AN924-4 NUT, Flareb tube bul.khead I I I I I I I I I I II’3 76868 BRACKET, Support clamp i I I I 1 1 I I I 1 111’4 73136 BRACKET, Extension, 900 angle 2 2 1 1 2 21 1 1 122 21 1 1 122

5 73966 SPACER, 1/2 O.D. x 9/32 I.D. x 17/32

long I III I I 1 I I I I I I I I"6 LW-16266-10-75 CLAMP 4 4 4 4 4 41 1 1 14 41 1 I 1 14 4 8

LW-16266-10-13 CLAMP 6 6 6 6 6 61 1 1 16 61 1 i 1 16 6 8

LW-16266-25-25 CLAMP I I I I I I I i I I Iiolio 11

6-10

I vCOIVIINr~ 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATBLOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


FUEL LINES, FUEL HOSES AND ATTACHING PAR1~ (Cont,)


LIO-380 TIG-360FIO N


NUMBER AC C C C C C C J C A B C C 0 E E F A A B H

Lllllltlllllllllllll11ABCCDEFAEAAABAIABABEGA

35 L 666 86 DDD 6

7 73843 CLAMP, Fuel injection line 2 4 4

8 73152 BRACKET, Support clamp 1 2 2 1

9 73136 BRACKET, Extension, fuel inj. line 1

10 ISTD-860 SCREW, No. 10-32 x 5/8 long, fill, hd. 6 6 6 6 6 6 6 6 6 6 8

11 STD-692 SCREW, No. 10-32 x 1/2 long, rd. hd. 2 2 2

12 STD-670 NUT, No. 10-32 self-locking 6 6 6 6 6 6 4 6 6 6 3 6 6 8

13 74070 ELBOW, 3/8 tubing, adjustable, 450 1 1 1 1

14 ISTD-921 SCREW, No. 10-32 x 7/8 long, fill. hd. 2 3

15 ISTD-425 WASHER, No. 10 plain 6 4 1

16 LW-16562 NIPPLE, 3/8 fl. tube to 9/16-18 st.

thd. 1 1 1 1 1 1 1

17 ILW-25-0.75 SCREW, 1/4-20 x 3/4 long, hex. hd. 1


19 STD-160 WASHER, 1/4lock, internal teeth 1

20 ISTD-1411 NUT, 1/4-20 plain 1

21 STD-1916 SCREW, 1/4-20 x 1-1/8 long, fill, hd.,

self-locking 6

22 172377 ELBOW, 3/8 tubing, adj., 90" 1

23 AN822-6 ELBOW, 3/8 fl. tube 1/4 NPT, 90" 2

1~

~I$’10,14r~U158

Yx~’,4,9 23

32

15

/-19

co,1812/=206

Y

Figure 35. FUEL LINES, FUEL HOSES AND ATTACHING PARTS

6-11

.~nA\ICO I vr.OlV1 i N~ 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES




LIO-380 f10-360FIO N


NUMBER AC 0 0 C 0 0 0 J 0 A 6 C C 0 E E F A A 6 H

Llllllllllllllllllfl11ABCCDEFAEAAABAIABABEGA

L 666 66 000 6

1 LW-13183-6S161 HOSE ASSY., Ful pump to injector 1

LW-13181-6-254 HOSE, Fuel pump to injector 2 2

LW-13181-6-112 HOSE ASSY., Fuel pump to injector 1 1 1 1 1 1 1

LW-12879-6S120 HOSE ASSY., Fuel pump to injector 1 1 1 1 1

LW-13185-6-114 HOSE ASSY., Fuel pump to injector 1

LW-12799-6S144 HOSE ASSY., Fuel pump to injector 1

2 78126 TUBE ASSY., Fuel pump to injector 1

77926 TUBE ASSY., Fuel pump to injector 1

3 72377 ELBOW, 3/8 tubing, adjustable, 900 1 2 1

4 75686 ELBOW, 5/16 tubing, adjustable, 900 1

5 LW-16562 NIPPLE, 3/8 fl. tube to 5/16-18 st.

thd. 1 1

6 72815 BRACKET, Support clamp, 90" twist 1 1 1 1 1 1 1 1 1 1 1

7 LW-16266-25-63 CLAMP 1 2 1

8 LW-16266-25-50 CLAMP 1 1 1 1 1 1 1 1 1

9 STO-860 SCREW, No. 10-32 x 5/8 long, fill. hd. 1 1 1 1 1 1 1 1 1 1 1 1

10 ISTD-425 WASHER, No. 10 plain 1 1 1 1 1 1 1 1 1 1 1 1

11 ISTD-670 NUT, No. 10-32 self-locking 1 1 1 1 1 1 1 1 1 1 1 1 1

12 AN837-4 ELBOW, 1/4 flared tube (bulkhead), 450 1 1

13 AN924-4 NUT, Flared tube (bulkhead) 1 1

14 ILW-13175-4-102 HOSE~ASSY:, Fuel-lnj. to"fuel manifold;

upper 1 1

LW-13175-4-172 HOSE, Fuel In]. to fuel manifold 1 1

LW-13175-4-343 HOSE ASSY., Fuel inj. to fuel manifold 1 1 1 1 1

LW-12798-4-340 HOSE ASSY., Fuel in). to fuel manifold 1

LW-13t75-4-340 HOSE ASSY., Fuel inj. to fuel manifold 1 1 1

LW-13175-4-352 HOSE ASSY., Fuel inj. to fuel manifold 1 1

LW-13192-4S334 HOSE ASSY., Fuel inj. to fuel manifold,

lower 1 1

u,

11oo

1213

Q~

Figure 36. FUEL LINES, FUEL HOSES AND ATTACHING PARTS

6-12



INJECTOR NOZZLE VENT AND ATTACHINr: PAF´•rTS


FIG, N LIO-360 TIG-380


DESCRIPTIONNUMBER 0 0 0 C C 0 0 J 0 A 6 C C 0 6 E F A A B H

Lllllllllltlllllllll1137 ABCCDEFAEAAABAABABEGA

L 666 66 000 6

1 77578 MANIFOLD, Right, injector nozzle vent 1

2 AN818-4C NUT, 1/4 flared tube coupling 1

3 AN819-4C SLEEVE, 1/4 flared tube coupling 1

4 77575 MANIFOLD, Left, injector nozzle vent 1

5 AN818-4C NUT, 1/4 flared tube coupling 1

6 AN819-4C SLEEVE, 1/4 flared tube coupling 17 STD-1339 PLUG, 1/16-27 NPT, Alien 28 76772 HOSE, 3/16 l.D. x 7/16 O.D. x 1-7/8

long 4

9 LW-15592-5-04 CLAMP, 7/16 O.D. hose 810 78025 BRACKET, Nozzle vent manifold 211 ISTD-860 SCREW, No. 10-32 x 5/8 long, fill, hd. 212 ISTD-670 NUT, No. 10-32 self-locking 213 STD-1925 SCREW, 1/4-20 x 5/8 long, pan hd.,

self-locking 214 IAN821-4 ELBOW, 1/4 flared tube coupling, 900 215 LW-12784-4-260 HOSE ASSY., (Left manifold injector

nozzle vent) 2

11~

9

14 "7"\ 7

~113

157

s15

io

14

rv

Figure 37. INIECTOR NOZZLE VENTIAND ATTACHING PARTS

6-13

I UCOIVIING 10, t10, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

TURBOCHARGER AND EXHAUST SYSTEMS

EXHAUST MANIFOLDS AND TRANSITION ASSEMBLY



t IPART 10-360 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J C A 6 C C D E 6 F A A 6 H

Llllllflllllllllllll11ABCCDEFAEAAABAABABEGA

38 L 666 66 DDD 6

1 75118 GASKET, Exhaust flange 8

2 77446 PIPE, Exhaust, cyl. no. 1 1

3 77457 PIPE, Exhaust, cyl. no, 2 1




7 77455 PIPE, Rear exhaust, right 1

8 78077 FLANGE 1

9 77459 PIPE, Rear exhaust, left t

10 178077 FLANGE 1

11 178084 GASKET 2

12 ILW-12093-5 COUPLING, V-band, 2.00 O.D. tube 2

13 177499 TRANSITION ASSY., Turbocharger 1

14 75608 FLANGE 1

15 78077 FLANGE 2

16 STD-1932 BUSHING, 1/4 NPT to 1/8 NPT 1

17 IANGC1OA BOLT, 3/8-24 x 1-5/64 long, hex. hd. 4

18 AN960C616 WASHER, 3/8 plain 4

19 MS20500-624 N~UT, 4

20 77911 VALVE, Exhaust bypass 1

7-1

LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

3

I"’2

11

~I ~12P-

9

~4

10,15

14,1520

~hlt:1

FiRure 38. EXHAUST MAN1FOLD AND TRANSITION ASSEMBL’r’

7-2



TURBOCHARGER AND ATTACHING PARTS



PART 10´•360 HIO-380 AEIO-380DESCRIPTION

NUMBER AC C C C C C C J C A 6 C C D 6 E F A A 6 H

L1111111111111111111ll39 ABCCDEFAEAAABAABABEGA

L 666 66 DDD 6

1 LW-11564 TURBOCHARGER, TO-4 1

2 77479 STRUT, Turbocharger mounting top 1

3 77481 BRACKET, Turbocharger 1

4 78073 LOCKPLATE, Turbocharger bracket 1

5 STD-2060 BOLT, 5/16-18 x 1.00 long, hex, hd. 1

6 60733 SHIM, 1-1/8 O.D. x 11/32 I.D, x .005

thick, (max. 3) un


8 77480 STRUT, Turbocharger mounting, inter. 1

9 77478 STRUT, Turbocharger mounting 1

10 ISTD-1815 NUT, 5/16-18 self-locking 3

11 IAN6C-36A BOLT, 3/8-24 x 3-53/64 long, hex. hd. 2

12 lM520500-624 NUT, 3/8-24 self-locking 2

13 178353 BLANKET, Turbocharger insulating 1

7-3

~AVC=O LYCOM I NG 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

57 r6

Ir j

a

8-\

8., ‘1.13

Figure 39. TURBOCHARGER AND ATTACHING PARTS

9-4

~IAVC=O LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES


TURBOCHARGER ATTACHING PARTS


LIO-360 TIG-360N f

PART 10-360 HIO-360 AEIO-360

DESCRIPTIONNUMBER AC C C C C C C J 0 A B C C 0 6 6 F A A B H


L 666 66 000 6

1 77546 HOSE, 2.00 I.D. x 2-7/16 O.D. x 2-1/16

long 1

2 AN737TW82 CLAMP, Hose, 2-1/8 2-25/32 x 9/16

wide 2

3 77812 DUCT, Turbocharger to fuel injector 1

LW-11720 DUCT, Turbocharger to fuel injector 1

4 77504 GASKET, Fuel injector 1



7 STD-1204 BOLT, 1/4-20 x 15/16 long 4

8 72376 ELBOW, 1/4 flared tube, 900 (rt. side

air duct) 1

9 73944 ELBOW, 1/4 flared tube, 450 (It. side

air duct) 1

10 73314 GASKET, Density differential press.

controller 5

11 77670 SHIELD, Heat controller 2

12 77758 CONTROLLER, Density 1

13 ILW-10098 CONTROLLER, Differential pressure 1

14 ISTD-28 WASHER, No. 10 8

15 STD-1896 SCREW, No. 10-24 x 7/8 long, fill.

hd., dr. hd. 8

7-5

I V~OIVIING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

sli\

11~ I "I,io

II sP,7

13~ r

1415-/

Figure 40. TURBOCHARGFR ATTACHING PARTS

7-6



TURBCCHARGER ATTACHING PARTS



jPART 10-380 HIO-360 AEIO-380

DESCRIPTIONNUMBER C C C C C C C J C A B C C D 6 E F A A B H


41 L 666 66 DDD 6

1 75739 NIPPLE, 3/8 flared tube 9/16-18

st, thd. 1

2 72377 ELBOW, 3/8 flared tube, adj., 90" 1

3 77950 TUBE ASSY., Density cent, drain 1

4 77917 TEE, 3/8 flared tube x 3/4-16 st. thd.

on run 1

5 MS20822-6-6 ELBOW, 3/8 flared tube, adj., 900 1

6 LW-12799-6S270 HOSE ASSY., 27.00 long 1

7 LW-1 6266-10-75 CLAMP 1

8 LW-1 6266;25-63 CLAMP 1

9 STD-860 SCREW, No. 10-32 x 5/8 long, fill. hd. 1

10 STD-425 WASHER, No. 10-32 plain 1

11 ISTD-670 NUT, No. 10-32 self-locking 1

12 ISTD-949 BUSHING, Reducer, 1/8 NPT to 1/4 NPT 1

13 79028 TEE, 1/4 tube with 1/8 NPT on run

restricted 1

7-7

~7PI\ICO I vr.OlVI INr~ 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

7g´•

c´• pi j

i/

7~I

10-7 !Ir

Figure 41. TURBOCHARGER ATTACHING PARTS

7-8



TURBOCHARGER ATTACHING PARTS




DESCRIPTIONNUMBER AC C C C C C C J C A B C C D E 6 F A A 6 H

Llllllltllllllllllll11ABCCDEFAEAAABAABABEGA

42 L 666 66 DDD 6

1 LW-18038 GASKET, Turbocharger oil drain adapter 1

2 77674 TUBE, Oil outlet, turbocharger 1

LW-12288 TUBE, Oil outlet, turbocharger 1

3 77955 SLEEVE, Fireproof 12.00 long 1

LW-12289 SLEEVE, Fireproof 13.00 long 1



6 STD-1946 BOLT, 3/8-16 x 7/8 long, hex. hd. 2

7 74117 BRACKET, Angle, 90" 1

8 AN500A416-10 SCREW, 1/4-20 x 5/8 long, fill. hd. 1


10 lLW-16266-25-75 CLAMP 1

11 STD-425 WASHER, No. 10 plain 1

12 ISTD-665 SCREW, No. 10-32 x 3/4 long, fill. hd. 1

13 ISTD-670 NUT, No. 10-32 self-locking 1

14 177675 TUBE, Oil outlet, turbo extension 1

15 LW-11718 TUBE, Tank outlet to scavenge pump

adapter 1

16 STD-1663 HOSE, 1/2 I.D. x 2-1/4 long 2

17 lLW-15592-8-08 CLAMP, Hose, 11/16 15/16 x 9/16

wide 4

18 AN839-8D ELBOW, 1/2 dia, hose to universal 1

19 IMS29512-8 SEAL, Oil, 5/64 dia. section x 41/64 I.D. 1

20 AN924-8D NUT, Flared tube, bulkhead fitting 1

21 72390 ELBOW, 1/8 NPT to 3/16 tube 900

restricted 1

22 LW-12786-3-073 HOSE, Fuel pump vent 1

23 78191 ELBOW, 3/16 flared tube, adj. 450 1

24 LW-12290 TANK, Turbo oil drain 1

25 ISTD-1419 BOLT, 1/4-20 x 1-1/8 long, hex. hd. 1

26 STD-160 WASHER, 1/4 internal lock 1

27 STD-1411 NUT, 1/4-20 plain 1

28 78844 HOSE, 3/4 1.0. x 2-1/2 long 1

29 LW-15592-8-08 CLAMP, 11/16 15/16 x 9/16 wide 2

7-9

R2797

217 C;‘ O

Ij1

-i

i~´•O

o 23

ZG)-Ii~li

c

o o

I r

Y 8 G3O

10Ti\ 20

O m I

719 Y o

C~O

137m

Zn ’m

o

G3~

v,15

a

-n Q)4 6"

2572~ 11 Fg 3Pm

u,

’P--IP

2 -1v, 3D

u,

w r If

o

29 2827 m

Z~29 n



TURBOCHAROER ATTACHING PARTS


LIO-360 TIG-360


DESCRIPTIONNUMBER AC C C C C C C J C A B C C D E E 6 A A B H

Llllllllltllllllllll11A B C C D 6 F A EIA A A B AIA B A 6 E G A

L 666 66 DDD 6

1 77813 GASKET, Turbocharger oil inlet adapter 1

2 77814 ADAPTER, Turbocharger oil inlet 1



5 STD-1902 BOLT, 5/16-18 x 1.00 long, hex, hd. 2

6 LW-11867 ELBOW, 1/8 NPT pipe thd., int. ext. 1

7 MS20823-4 ELBOW, 1/4 flared tube x 1/8-27 NPT 1

8 73319 HOSE ASSY., 7-1/2 long 1

9 LW-I 6266-25-63 CLAMP 1

10 AN500A416-10 SCREW, 1/4-20 x 5/8 long, fill. hd. 1


12 IAN824-4 TEE, 1/4 flared tube 1

13 lLW-12798-4-074 HOSE ASSY., 7-1/2 long 1

14 73143 ELBOW, 1/4 flared tube, 1/8 NPT,

restricted .070 dia. 1

15 LW-12798-4S204 HOSE ASSY., 20-1/2 long 1

16 LW-1 6266-25-63 CLAMP 2

17 AN500A416-10 SCREW, 1/4-20 x 5/8 long, fill, hd. 1


19 72376 ELBOW, 1/4 flared tube, adj., 900 1

20 72377 ELBOW, 3/8 flared tube, adj., 900 1

21 LW-12799-6S074 HOSE ASSY., 7-1/2 long 1

22 76355 TEE, 3/8 flared type, adj, with st. thd.

on run 1

23 77947 TUBE ASSY., Density cent. inlet 1

7-11

I vr’rOlV1ING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

"7

T’’

~I´•7

Q,

i,n

22~

d9

Figure 43. TURBOCHARGER ATTACHING PARTS

7-12

L~AVCO LYCOM I NG 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOG


SECTION 8

SERVICE KIT SECTION

CYLINDER, PISTON AND RING ASSY. KIT

HIO-360-E1AD, -E1BD, -F1AD

Part No. Part Name &ty.

LW-14458 CYLINDER, PISTON AND RING ASSY. 1

STD-160 WASHER 4

STD-1111 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Exhaust 2

MS13998-3 CAP, Valve stem, exhaust 1

72050 KEY, Valve intake 2


66731 COVER, Valve rocker shaft 2



LW-13321 SEAT, Valve spring, lower, intake 1

68795 COVER ASSY., Rocher box 1

LW´•13446 or


71195 BOX, Set-up 1

71265 ROCKER ASSY., Exhaust valve 1

71266 ROCKER ASSY., Intake valve 1


71549 WASHER, Valve rocker thrust 2

72626 SHAFT, Valve rocker 2

LW-16740 VALVE, Exhaust (nimonic) 1

LW-13322 SEAT, Valve spring, lower 1


73857 RING, Piston, oil regulating (chrome) 1

74241 RING, Piston compression (chrome) 2

LW-16475 SEAT, Valve spring, upper exhaust 1

69532 SEAT, Valve spring, upper intake 1

LW-13358-S PISTON 1



LW-12988 CYLINDER ASSY., Nitrided (long reach) 1


62388 CAP 1

8-1

~AVCO ~-VCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION





STD-160 WASHER 4

STD-1411 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Exhaust 2






67193 GASKET, Rocker box cover I

LW-13321 SEAT, Valve spring, lower intake 1

68795 COVER ASSY., Rocker box 1

LW-13446 or


71195 BOX, Set-up 1









73859 RING, Piston, oil regulating (chrome) 1




LW-14610-S PISTON 1





62388 CAP 1

8-2

~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGMIIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTIONSSERVICE KIT SECTION


WIG-360-A, -C SERIES



STD-160 WASHER 4

STD-1411 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Valve, exhaust 2



69532 SEAT, Valve spring, upper 1

72050 KEY, Valve 2

62388 CAP, Valve stem 1






LW-13321 SEAT, Valve .spring, lower, intake 1

LW-11796 SPRING, Valve, outer 2

LW-11797 SPRING, Valve, inner 2


73857 or

LW-12328 RING, Piston, oil regulating (chrome) 1

LW-13446 or


71195 BOX, Set-up 1




71549 WASHER, Valve rocker thrust Z



73112 or


LW-16475 SEAT, Valve spring, upper 1

74241 RING, Piston, compressor (chrome) 2

EW-19047 CYLINDER AND HEAD ASSY., Nitrided 1

STD-1215 BOLT 2

LW-10207-S PISTON 1


SSP2272 TAG 1

8-3


SECTION 8

SERVICE KIT SECTION


HIO-360-A, -C SERIES



STD-160 WASHER 4

STD-1411 NUT 4

STD-1925 SCREW 8


MS13998´•3 CAP, Valve stem, exhaust 1


69532 SEAT, Valve spring, upper 1

72050 KEY, Valve 2

62388 CAP, Valve stem 1







LW-11796 SPRING, Valve, outer 2



69457 or 69544 or


LW-13446 or


71195 BOX, Setup 1







73112 or

LW-13322 SHAFT, Valve spring, lower 1


73264 PISTON 1

74241 RING, Piston, compression (chrome) 3

LW-19047 CYLINDER AND HEAD ASSY., Nitrided 1

STD-1215 BOLT 2


SSP2272 TAG 1

8-4

~AVCO LYOOMING 10, t1O, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION


IO-360-C, -J; LIO-360-C


I,W-19134 CYLINDER, PISTON AND RING ASSY. 1

STD-160 WASHER 4

STD-1215 BOLT 2

STD-1411 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Valve exhaust 2








LW-13321 SEAT, Valve spring lower, intake 1


69457 or

LW-13681 RING, Piston oil regulating (chrome) 1

LW-13446 or


71195 BOX, Set-up 1







73112 or

LW-I3322 SEAT, Valve spring lower 1


73264 PISTON 1






LW-12993 CYLINDER ASSY., Nitrided 1


SSP2272 TAG 1

62388 CAP 1

8-5

~AVCO LYCOMING 10, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION


IO-360-C, -J; LIO-360-C; AEIO-360-A1E



STD-160 WASHER 4

STD-1215 BOLT 2

STD-1´•111 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Exhaust (rotator type) 2










LW-13446 or

ILW-14077 PIN, Piston 1

71195 BOX, Set-up 1







73112 or



73857 or

LW-12328 RING, Piston, oil regulating, chrome 1

74241 RING, Piston compression, chrome 2



LW-10207-S PISTON 1





SSP2272 TAG 1

62388 CAP 1

8-6

L~AVCO LYCOM I NG 10, LIO, H1O, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8SERVICE KIT SECTION

CYLINDER, PISTON AND RING KIT ASSY.

HIO-360-D1A


LW-19137 CYLINDER, PISTON AND RING KIT ASSY. 1STD-160 WASHER 4STD-1411 NUT 4STD-1925 SCREW 8MS13997-3 KEY, Valve, exhaust (rotator type) 2MS13998-3 CAP, Valve stem, exhaust (rotator type) 160009 KEY, Valve, intake 260828 PLUG, Piston pin 2LW-18661 SEAL, Shroud tube 466731 COVER, Valve rocker shaft 266732 GASKET, Valve rocker shaft cover 267193 GASKET, Rocker box cover 1LW-13321 SEAT, Valve spring, lower, intake 1LW-1L796 SPRING, Valve, outer 2LW-10077 SEAT, Valve spring, upper, intake 1LW-11797 SPRING, Valve, inner 268795 COVER ASSY., Rocker box I73857 or

LW-12328 RING, Piston, oil regulating (chrome) 1LW-13446 or

LW-14077 PIN, Piston 171195 BOX, Set-up 171265 ROCKER ASSY., Exhaust valve 171266 ROCKER ASSY., Intake valve Ii71481 SEAL, Cylinder base 171549 WASHER, Valve rocker thrust 272626 SHAFT, Valve rocker 2LW-16740 VALVE, Exhaust (nimonic) 173112 or

LW-13322 SEAT, Valve spring, lower 1LW-16475 SEAT, Valve spring, upper, exhaust 173117 VALVE, Intake 174241 RING, Piston, compression (chrome) 2LW-19047 CYLINDER AND HEAD ASSY., Nitrided 1STD-1215 BOLT 2LW-11487-S PISTON 1LW-11775 PLUG, Piston pin 2SSP2272 TAG 1

8-7

L~AVCO LYCOMING 10, LID, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION


AEIO-360-B1G6, -H1A; HIO-360-B1A


76296 CYLINDER, PISTON AND RING KIT ASSY. 1

MS13997-3 KEY, Valve exhaust 2


STD-1215 BOLT 2

STD-1411 NUT 1

STD-1925 SCREW 6



61247 COVER, Rocker box 1


65441 SEAT, Valve spring, lower (intake) 1

69444 ROCKER ASSY., Valve, intake 1


71195 BOX, Set-up 1


72198 PLUG, Piston 2

73857 or

LW-12328 RING, Piston, oil regulating 1

73938 VALVE, Intake 1



74636 ROCKER ASSY., Exhaust 1

75089 PISTON 1


LW-10077 SEAT, Valve spring upper, intake 1

LW-11775 PLUG, Piston pin (aluminum) 2



LW-12272 LOCKPLATE, Shroud tube 1


LW-12892 THRUST BUTTON 2

LW-13323 SEAT, Valve spring lower, exhaust 1

LW-13790 SHAFT, Valve rocker 1


LW-14995 SPRING, Shroud tube 1


SSP672 TAG 1

SSP2472 TAG 1

8-8


SECTION 8

SERVICE KIT SECTION


TIO-360-A1B


78911 CYLINDER, PISTON AND RING KIT ASSY. 1

STD-160 WASHER 4

STD-1411 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Valve, exhaust (rotator type) 2

MS13998-3 CAP, Valve st~m, exhaust (rotator type) 1




66731 COVER. Valve rocker shaft 2




LW-11796 SPRING, Valve, out~r 2

69532 SEAT, Valve spring, upper, intake 1



73857 or


LW-13446 or


71195 BOX, Set-up 1





72626 SHAFT. Valve rocker 2


73112 or




LW-10545-S PISTON 1

74241 RING, Piston, compression (chrome) 2

77544 CYLINDER AND HEAD ASSY., Nitrided 1

STD-1215 BOLT 2


SSP2272 TAG 1

62388 CAP, Valve stem, intake I

8-9

L~IAVCO LYCOMING 10, LIO, HIO, f10, AEIO-360 SERIES PARfS CATALOGWIDE CYLINDER FLANGE CRAM1(CASE MODEC ENGINES

SECTION 8

SERVICE KIT SECTION


IO-360-C1F


LW-15795 CYLINDER, PISTON AND RING ASSY. KIT 1

STD-160 WASHER 4

STD-1111 NUT 4

STD-1925 SCREW 8

MS13997-3 KEY, Exhaust (rotator type) 2

MS13998-3 CAP, Valve stem exhaust 1








LW-14078 PIN, Piston pin 1

71195 BOX, Set-up 1








LW-13622 VALVE, Intake (small rotator) 1

73857 RING, Piston, oil reg. chrome 1




LW-10207-S PISTON (3 ring) 1





62388 CAP 1

8-10


SECTION 8

SERVICE KIT SECTION

SEAL AND GASKET KIT

HIO-360-B1A


75439-1 SEAL AND GASKET SET 1

AN901-8A GASKET 1

STD-111 GASKET, Annular 1

STD-208 SEAL, Oil 1

STD-213´• SEAL, Oil (fuel pump drive) 1



1691-C GASKET, Fuel pump pad 1



61156 LOCKPLATE, Crankshaft gear 1

LW-14260 SEAL, Tachometer 1



61523 BOX, Set-up 1








69345 SPACER 4

69551 GASKET, Accessory pad cover 1



71973 GASKET, Intake flange 4

72053 GASKET, Governor drive pad 2

72059 GASKET 1

72075 SEAL, Oil 6

72078 LOCKPLATE, Cam gear 2


73383 LOCKPLATE 2






76510 GASKET 1



LW-12272 LOCRPLATE, Shroud tube 4

LW-12681 GASKET, Magr~eto 2

LW-12795 GASKET 1

LW-14995 SPRING 4


70455 GASKET 1

STD-1763 PALNUT 4

8-11

~TAVCO LYCOMING 10, LIO, WiO, TIG, AEIO-3SO SERIES PARTS GATALOGWIDE CYLINDER FLANOE CRANKCASE MODEL ENGINES

SECTIOM 8

SERVICE KIT SECTION

SEAL AND GASKET SET

IO-360-C, -J SERIES; LIO-360-C1E6; HIO-360-A, -C SERIES



AN901-8A GASKET 1


STD-208 SEAL, Oil 1

STD-213 SEAL, Oil 1



1691-C GASKET, Fuel pump 2


60096 GASKET 1





61523 BOX, Set-up 1

62224 GASKET, Magneto 3

LW-18663. SEAL, Shroud tube 16




68129 GASKET 1






71973 GASKET 4


72075 SEAL, Oil 6

72078 LOCKPLATE, Camshaft gear 2


73032 GASKET, Injector elbow 1

73383 LOCKPLATE 2






76510 GASKET 1

LW-12795 GASKET 1



LW-12681 GASKET 2

LW-13792 SEAL, Crankshaft on 1

72059 GASKET 1

70455 GASKET 1

75906 GASKET 4


8-12

~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEt ENGINES

SECTIOM 8

SERVICE KIT SECTIOM

SEAL AND GASKET SET


Part No. Part Name &ty´•


MS16~26-1081 RING, Internal retaining 1


STD-111 GASKET 1

STD-294 GASKET 2

STD-1045 GASKET 1

LW-18661 GASKET, Shroud tube 16






71973 GASKET, Intake pipe 4

72075 SEAL, oil 6


73383 LOCKPLATE 2



LW-1033a LOCKPLATE, Crankshaft 1

LW´•12681 GASKET, Magneto 1


LW-13792 SEAL, Crankshaft I


61523 BOX, Set-up 1

8-13

~AVCO LYCOMING 1D, LIO, HID, TIG, AEID-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION

SEAL AND GASKET SET

MIO-360-D1A





MS29512-4 SEAL 1

MS29512-6 SEAL 1

MS29512-10 SEAL 3

STD-111 GASKET 1

STD-294 GASKET 2

STD-1045 GASKET 1


60096 GASKET 1


61523 BOX, Set-up 1






71973 GASKET 4

72075 SEAL, Oil 6


72312 "0" RING 1

73032 GASKET, Fuel injector elbow 1

73383 LOCKPLATE 2




78032 LOCKRING, Internal pipe 4

LW-10332 LOCKPLATE, Crankshaft 1






72059 GASKET, Oil level gage 1


LW-f2620 RING, Seal, intake pipe 4

8-14

~7AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION

SEAE AND GASKET SET

AEIO-360 SERIES




MS29512-10 SEAL, Oil 1

MS29512´•12 SEAL, Oil 2

STD-111 GASKET 2

STD-294 GASKET 2

STD-1045 GASKET 1







61503 SLEEVE, Shroud tube seal 8







70455 GASKET 1


71973 GASKET, 2 bolt flange 4


72075 SEAL, Oil 4


73383 LOCKPLATE 1



74712 RING, Seal 4

77055 GASKET, Crankcase cover, upper 1

77056 GASKET, Crankcase cover, lower 1


77569 SEAL 4

LW-13792 SEAL 1

AN901-8A GASKET 1


LW-12795 GASKET P

LW-13353 GASKET 1

MS16625-1081 RING 1

STD-1221 RING 1

65321 GASKET 4

69551 GASKET 1

72059 GASKET 1

74065 "0" RING 1

74068 "0" RING 1

75906 GASKET 4

61523 BOX, Set-up 1

70310 SEAL 8

8-15

L~AVCO LYCOMING 101 LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

SECTION 8

SERVICE KIT SECTION

SEAL AND GASKET SET

TIO-36O-A1B




STD-111 GASKET 1

STD-208 SEAL, Oil 1

STD-213 SEAL, Oil (fuel pump) 1

STD-294 GASKET 2



STD-1045 GASKET 1


61156 LOCKPLATE, Crankshaft gear I








LW-12272 LOCKPLATE, Shroud tube 4








72829 LOCKPLATE 1

73032 GASKET, Air inlet housing 1

73314 GASKET, Density and diff. press. controller 5

73383 LOCKPLATE 2


73818 GASKET, Accessory housingLW-12681 GASKET, Magneto 2



LW-18038 GASKET, Turbo oil drain I

LW-12795 GASKET, Oil filter adapter 1



77813 CASKET, Turbo oil inlet 1

78073 LOCKPLATE 1

78084 GASKET 2

78086 GASKET 1

76510 GASKET 1

77569 SEAL 4

72059 GASKET 1

LW-14995 SPRING 4

69345 SPACER 4

LW-13792 SEAL 1

61523 BOX, Set-up 1

8-.16

rlG~AVCO LYCOMING 10, LIO, HIO, TIG, AEIO-38O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEC ENGINES

NUMERICAL INDEX


AN365-420C Nut 6-1 LW-1 0284 Gear 1-6AN365-632C Nut 4-11 FW-10286 Gear Assy. 1-8AN500-A416-’10 Screw 4-13 LW-10288 Gear Assy. 1-8AN500-A416-10 Screw 7-9 LW-10296 Gear Assy. 1-8AN500 -A416-10 Screw 7-11 LW-1 0298 Shaft 1-8AN 500-416-18 Screw 4-11 LW-10298 Shaft 2-15AN526-420-8 Screw 4-9 LW-1 0299 Shaft 1-8AN56581032H5 Set Screw 1-10 LW-10305 Gear Assy. 2-13AN6-13 Bolt 5-1 LW-1 0320 Sleeve 2-9AN6-14 Bolt 5-1 LW-10321 Spring 2-9AN6-16 Bolt 5-1 LW-10323 Gear Assy. 2-15AN6-32 Bolt 5-1 LW-10327 Shaftgear Assy. 2-15AN6-34A Bolt 1-12 LW-10332 Lockplate 1-6ANGC-1OA Bolt 7-1 LW-1 0341 Insert 2-1AN6C-36A Bolt 7-3 LW-1 0342 Body 2-7AN73 7TW82 Clamp 7-5 LW-1 0382 Bracket 5-1AN777-8D Elbow 2-11 LW-1 0409 Fuel Injector 6-7AN780-2 Nipple 6-5 LW-1 0481 Pipe 6-3AN7!31-2 Elbow 6-5 LW-10482 Housing Assy. 2-1AN8-14A Bolt 1-6 LW-1 0483 Pipe 6-3AN814-10L Plug 2-11 LW-1 0484 Pipe 6-3AN816-4 Nipple 6-5 LW-10493 Elbow Assy. 6-7AN816-4 Nipple 6-7 LW-10545 Piston 3-3AN816-6 Nipple 2-15 LW-10551 Gear 1-3AN818-4C Nut 6-13 LW-10646 Rod Assy. 3-3AN819-4C Sleeve 6-13 LW-1 0647 Dowel 1-1AN821´•4 Elbow 6-13 LW-10799 Spacer 2-15AN822-6 Elbow 6-11 LW-10885 Housing Assy. 2-1AN824-4 Tee 7-11 LW-10892 Housing Assy. 2-1AN833-4 Elbow 6-5 LW-1 0945 Roller 1-6AN837-4 Elbow 6-12 LW-10977 Roller 1-6AN839-8D Elbow 7-9 LW-10979 Alternator Assy. 5-3AN844-10D Elbow 2-11 LW-11021 Bearing 1-3AN893-2 Reducer 6-7 LW-11166 Fuel Pump 2-15AN9O1-A Gasket 2-11 LW-11228 Crankshaft 1-5AN924-4 Nut 6-5 LW-11229 Crankshaft 1-5AN924-4 Nut 6-7 LW-11281 Pipe 6-3AN924-4 Nut 6-10 LW-11282 Pipe 6-3AN924-4 Nut 6-12 LW-11283 Pipe 6-3AN924-8D Nut 7-9 LW-11284 Pipe 6-3AN931-12S17 Grommet 3-10 LW-11457 Rod Assy. 3-3AN932-2 Plug 6-5 LW-11485 Tube 3-5AN960-61 6L Washer 1-12 LW-11487 Piston 3-3AN960C616 Washer 7-1 LW-11518 Shaft 2-5LW-10020 Fuel Injector 6-5 LW-11519 Support Assy. 1-3LW-10077 Seat 3-5 CW-11520 Housing Assy. 2-1LW-1 0098 Controller 7-5 LW-11564 Turbocharger 7-3LW-10179 Regulator 5-3 LW-11573 Support Assy. 1-3LW-10185 Regulator 5-3 LW-11578 Crankshaft 1-5LW-1 0207 Piston 3-3 LW-11579 Crankshaft 1-5

9-1

L~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

NUMERICAL INDEX (Cont.)


LW-11718 Tube 7-9 LW-12311 Camshaft 1-6

LW-11720 Duct 7-5 LW-12312 Camshaft 1-6

LW-11750 Rod Assy. 3-3 LW-12335 Crankshaft 1-5

LW-11754 Camshaft 1-6 LW-1 2336 Crankshaft 1-5

LW-11775 Plug 3-3 LW-1 2347 Plate 2-3

LW-11795 Spring 3-5 LW-12427 Cylinder Head 3-1

LW-11796 Spring 3-5 LW-1 2545 Plug 6-1

LW-11797 Spring 3-5 LW-12571 Drive Assy. 2-5

LW-11839 Body 2-7 LW-1 2586 Fuel Injector 6-7

LW-11866 Spacer Nut 1-12 LW-12589 Insert 2-1

LW-11867 Elbow 7-11 LW-1 2596 Bolt 3-3

LW 11800 Spring 3-5 LW-1 2604 Nipple 6-5

LW 1194448S70-75 Lead Assy. 4-9 LW-1 2604 Nipple 6-8

LW-1194448590-75 Lead Assy. 4-9 LW-12618 Sump Assy. 6-1

LW 11944-72S70-75 Lead Assy. 4-9 LW-12620 Ring 6-3

LW-1 2074 Bracket 6-5 LW-1 2621 Pipe 6-3

LW-1 2083 Switch 5-5 LW-1 2622 Pipe 6-3

LW-1 2085 Switch 5-5 LW-1 2623 Pipe 6-3

LW-1 2086 Switch 5-5 LW-1 2624 Pipe 6-3

LW-1 2093-5 Coupling 7-1 LW-1 2643 Fuel Injector 6-7

LW-12098-0-134 Tube Assy. 6-9 LW-12681 Gasket 4-1


LW- 1 209 8-0- 1 40 Tube Assy. 6-9 LW- 1 268 1 Gasket 4-5

LW- 1 209 8-0- 1 40 Tube Assy. 6-10 LW- 1 268 1 Gasket 4-7

LW-12098-0-170 Tube Assy. 6-9 LW-12688 Seat 3-1

LW-12098-0-170 Tube Assy. 6-10 LW-12700 Hose 2-3

LW-12098-0-200 Tube Assy. 6-9 LW-12706 Adapter 4-3

LW-12098-0-200 Tube Assy. 6-10 LW-12706 Adapter 4-7

LW-12098-0-310 Tube Assy. 6-10 LW-12752 Clamp 2-3

LW-1 2098-2-2 56 Tube Assy. 6-10 LW-12754 Sump Assy. 6-1

LW-12098-2-276 Tube Assy. 6-9 LW-12784-4-260 Hose Assy. 6-13

LW-12098-2-296 Tube Assy. 6-10 LW-12786-3-073 Hose 7-9


LW-12098-3-310 Tube Assy. 6-10 LW-1 2798-4-074 Hose Assy. 7-11

LW-12098-3-320 Tube Assy. 6-10 ~W-12798-4-340 Hose Assy. 6-12

LW-1 2098-3-334 Tube Assy. 6-10 LW-12 798-481 30 Hose 6-9

LW-12098-3-350 Tube Assy. 6-9 LW-12798-48204 Hose Assy. 7-11

LW-12098-4-350 Tube Assy. 6-10 LW-12799-6S074 Hose Assy. 7-11



LW-12098-4-412 Tube Assy. 6-10 LW-12832 Alternator Assy. 5-3

LW-12155 Manifold Assy. 6-5 LW-12879-68120 Hose Assy. 6-12

LW-12168 Shaftgear 2-5 LW-12892 Thrust Button 3-7

LW-12170 Adapter Assy. 2-5 LW-12911 Gear Assy. 1-8

LW-12186 Nut 3-3 LW-12913 Thrust Button 2-3

LW-12213 Tube Assy. 2-3 LW-12914 Gear Assy. 2-3

LW-12272 Lockplate 3-5 LW-12920 Tube Assy. 2-3

LW-12288 Tube 7-9 LW-1 2949 Valve 3-5

LW-12289 Sleeve 7-9 LW-12968 Housing Assy. 2-1

LW-12290 Tank 7-9 LW-12988 Cylinder Head 3-1

9-2

~AVCO LYCOMING 1O, LIO, MIG, TIG, AEIO-380 SERES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

NUMERICAL INDEX tCont.)


LW-12993 Cylinder Head 3-1 LW-13823 Crankcase Assy. 1-1

tW-13039 Bracket 5-1 LW-13824 Crankcase Assy. 1-1

LW-13077 Spring 3-5 tW-13861 Sump Assy. 6-1

LW-13107 Pipe 6-3 LW-13864 Sump Assy. 6-1

LW-13108 Pipe 6-3 LW-1 3884 Bearing 1-3

LW-13109 Pipe 6-3 LW-1 3885 Bearing 1-3

LW-13110 Pipe 6-3 LW-I 3896 Plug 1-10

LW-1317 5-4-1 02 Hose Assv. 6-12 tW-l 3904 Kit 2-9

LW-1317 5-4-172 Hose 6-12 LW-1 3906 Oil Filter Assy. 2-9

LW-13175-4-340 Hose Assy. 6-12 LW-13923 Bushing 3-3

LW-13175-4-343 Hose Assy. 6-12 LW-13939 Clamp 4-11

LW-13175-4-352 Hose Assy. 6-12 LW-14021 Shaft 1-10

LW-13181-6-112 Hose Assy. 6-12 tW-14040 Gear Assy. 2-7

LW-13181-6-254 Hose 6-12 LW-14057 Clip 4-7

LW-13183-65161 Hose Assy. 6-12 LW-1a057 Clip 4-9

LW-13185-6-114 Hose Assy. 6-12 LW-14057 Clip 4-11

LW-13192-4S334 Hose Assy. 6-12 LW-I 4060 Clip 4-7

LW-1 3209 Bearing 3-3 LW- 1 4060 Clip 4-9

LW-1 321 5 Oil Filter 2-9 tW- 1 4060 Clip 4-11

LW-13264 Pipe 6-3 LW-14077 Pin 3-3

LW-1 3265 Pipe 6-3 LW-1 4078 Pin 3-3

LW-13266 Pipe 6-3 LW-14113 Manifold Assy. 6-7

LW-1 3267 Pipe 6-3 LW-14215 Starter 5-5

LW-1 3321 Seat 3-5 LW-1 4230 Cushion 4-1

LW-13322 Seat 36 tW-14a60 Seal 2-7

tW-13323 Seat 3-5 tW-l 4308 Alternator 5-3

LW-1 3353 Gasket 6-1 LW-14316 Alternator 5-3

iW-13422 Rod Assy. 3-3 LW-14319 Alternator 5-3

LW-13521 Bearing 3-3 LW-14324 Alternator 5-3

LW-13622 Valve 3-5 LW-14353 Alternator Assy. 5-3

LW-13641 Cushion 4-5 LW-f4357 Alternator Assy. 5-3

tW-13643 Gear 4-5 LW-14382 Fuel Injector 6-5

LW-13680 Crankcase Assy. 1-1 LW-14439 Sump Assy. 6-1

LW-1 3683 Bearing 1-3 tW-14529 Plug 1-5

LW-13688 Crankshaft 1-5 LW-14576 Manifold Assy. 6-5

LW-1 3774 impeller 2-7 LW-1 4610 Piston 3-3

tW-13775 Impeller Assy. 2-7 tW-14706 Housing Assy. 2-1

LW-13790 Shaft 3-7 tW-14725 Gage Assy. 1-3

LW-13792 Seal 1-3 LW-t4726 Gage Assy. 1-3

LW-13793 Stud 1-1 tW-t 4753 Gage Assy. 1-3

LW-13796 Shaft 1-8 LW-14757 Gage Assy. 1-3

LW-13807 Adapter Assy. 6-4 LW-14758 Gage Assy. 1-3

LW-1 3808 Crankcase Assy. 1-1 LW-1 4760 Gage Assy. 1-3

tW-l 3809 Crankcase Assy.~ 1-1 LW-f 4763 Gage Assy. 1-3

LW-13811 Crankcase Assy. 1-1 LW-14765 Gage Assy. 1-3

LW-13813 Crankcase Assy. 1-1 tW-14766 Gage Assy. 1-3



LW-13821 Crankcase Assy. 1-1 LW-14820 Ring 1-6

LW-13822 Crankcase Assy. 1-1 tW-14910 Coupling 4-1

9-3

~AVCO ~-YCOMING 1O, LIO, HIO, f1O, AEIO-36O SER1ES PARfS CATALOGWIDE CYLIIVDER FLANGE CRANI(CASE MODEL ENG~WES

NUMERICAL INDEX (Cont.B


LW-14954 Bearing 3-3 LW-16562 Nipple 6-9

LW-1 4970 Camshaft 1-6 LW-1 6562 Nipple 6-11

LW-14995 Spring 3-5 LW-16562 Nipple 6-12

LW-15416 Adapter Assy. 4-1 LW-16591 Mag. Harness Assy. 4-7

LW-1 5473 Fuel Pump 2-15 LW-1 6740 Valve 3-5

LW-1 5506 Fuel Pump 2-15 LW-17160 Crankshaft 1-5

LW-15533 Manifold Assy. 6-5 LW-17166 Crankshaft 1-5

LW-15571 Starter 5-5 LW-17168 Crankshaft 1-5

LW-1 5572 Starter 5-5 LW-17170 Crankshaft 1-5



LW-1 5592-5-04 Clamp 6-13 LW-1 7246 Crankshaft 1-5

LW-1 5592-5-05 Clamp 3-10 LW-1 7249 Crankshaft 1-5

LW-1 5592-8-08 Clamp 7-9 LW-17250 Crankshaft 1-5

LW-1 5592-8-28 Clamp 6-3 LW-17254 Crankshaft 1-5

LW-1 5628 Seal 1-3 LW-17273 Crankshaft 1-5

LW-15635 Mag. Harness Assy. 4-7 LW-17276 Crankshaft 1-5

LW-1 5636 Magneto 4-7 LW-17277 Crankshaft 1-5

LW-15637 Mag. Harness Assy. 4-7 LW-17281 Crankshaft 1-5

LW-15638 Magneto 4-7 LW-18023 Crankcase Assy. 1-1

LW-1 5664 Fuel Injector 6-5 LW-1 8038 Gasket 7-9

LW-1 57208 Kit 4-1 LW-1 8047 Starter 5-5

LW-1 57208 Kit 4-5 LW-1810 Impeller 2-7

LW-1 57209 Kit 4-1 LW-18109 Impeller 2-7

LW-157209 Kit 4-5 LW-18110 Impeller Assy. 2-7

LW-1 5877 Camshaft 1-6 LW-18111 Fuel Injector 6-5

LW-1 5895 Regulator 5-3 LW-1 8265 Nozzle 6-5

LW-15971 Fuel Injector 6-5 LW-18265 Nozzle Assy. 6-7

LW-16054 Crankcase Assy. 1´•1 LW-18267 Nozzle Assy. 6-5

LW-16059 Crankshaft 1-5 LW-18267 Nozzle Assy. 6-7

LW-16064 Support Assy. 1-3 LW-19001 Valve 3-5

LW-16266-10-13 Clamp 6-9 LW-19047 Cylinder Head 3-1

LW-16266-10-13 Clamp 6-10 LW-2 5-.50 Bolt 6-6

LW-1 6266-10-75 Clamp 6-9 LW-2 5-.50 Bolt 6-8

LW-16266-10-75 Clamp 6-10 LW-2 5-0.75 Bolt 2-9

LW-1 6266-10-75 Clamp 7-7 LW-25-0.75 Screw 6-11

LW-1 6266-2 5-2 5 Clamp 6-9 LW-31 H.7 5 Bolt 5-1

LW-16266-25-25 Clamp 6-10 LW-31-1.88 Bolt 2-15

LW-16266-25-38 Clamp 2-3 LW-349235-3 Magneto 4-1


LW-16266-25-50 Clamp 4-11 1_\1\1-349285-1 Magneto 4-1

LW-1 6266-25-50 Clamp 6-12 LW-349285-7 Magneto 4-1

LW-1 6266-2 5-63 Clamp 6-12 LW-349305-1 Magneto 4-1

LW-16266-25-63 Clamp 7-7 LW-34930 5-1 Magneto 4-3


LW-1 6266-2 5-7 5 Clamp 7-9 LW-349365-3 Magneto 4-3

LW-1 63005-2 Magneto 4-1 LW-349365-6 Magneto 4-3

LW-163005-11 Magneto 4-1 LW-349365-9 Magneto 4-3

LW-1 63045-3 Magneto 4-1 LW-349365-10 Magneto 4-3

LW-1 6475 Seat 3-5 LW-38 255 5-13 Magneto 4-5

9-4

L;1~7AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-36Q SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES



LW-382 698 Kit 4-5 MS20822-6-6 Elbow 2-11

LW-38512 4-111 Magneto 4-5 MS20822-6-6 Elbow 7-7

LW-385124-124 Magneto 4-5 MS20823-4 Elbow 6-5

LW-51 360-29 Magneto 4-3 MS20823-4 Elbow 7-11

LW-51 360-54 Magneto 4-3 MS20823-6 Elbow 2-15

LW-5 2305-1 Kit Assy. 4-3 MS20823-8 Elbow 2-11

LW-682605-13 Magneto 4-5 MS20823-6D Elbow 3-1

LW-684400-303 Harness 4-5 MS21919G7 Clip 4-9

LW-684409-102 Harness 4-5 MS21919-G12 Clip 4-9

LW-684409-1 06 Harness 4-5 MS2951 2-4 Seal 6-5

LW-684412-106 Harness 4-5 MS2951 2-4 Seal 8-7

LW-6851 44-112 Magneto 4-5 MS29512-6 Seal 6-7

LW-685144-114 Magneto 4-5 MS2951 2-8 Seal 7-9

LW-720410-3 Harness Assy. 4-13 MS29512-10 Seal 2-11

LW-720510-1 Harness Assy. 4-13 STD-8 Washer 1-12

LW-720510-4 Harness Assy. 4-13 STD-8 Washer 2-5

LW-M-2375 Plate 4-9 STD-8 Washer 2-7

LW-M-2375 Plate 4-11 STD-8 Washer 2-9

LW-M-2403 Harness Assy. 4-11 STD-8 Washer 2-13







LW-M-2425 Harness Assy. 4-11 STD-19 Dowel 1-10



MS1 24703 Insert 2-1 STD-33 Washer 2-15

MS1 3997-3 Key 3-5 STD-33 Washer 7-9

MS1 3998-3 Cap 3-5 STD-35 Washer 1-10

MS16625-1081 Ring 1-8 STD-35 Washer 2-3

MS1 662 5-1 1 00 Ring 2-9 STD-35 Washer 2-5

M-1735-23 Lead Assy. 4-7 STD-35 Washer 2-7




M-l 735-35 Lead Assy. 4-7 STD-35 Washer 5-5


M-173 5-41 Lead Assy. 4-7 STD-35 Washer 6-7


M-1869-48 Lead Assy. 4-9 STD-68 Pin 5-1

M-1985-48 Lead Assy. 4-12 STD-82 Screw 6-6

M-1985-72 Lead Assy. 4-12 STD-82 Screw 6-8

MS20500-624 Nut 7-1 STD-91 Plug 6-1

MS20500-624 Nut 7-3 STD-95 Key 2-5

MS20822-4 Elbow 6-5 STD-I11 Gasket 6-1

MS20822-6 Elbow 2-3 STD-1 48 Nipple 6-5

MS20822-6 Elbow 2-5 STD-148 Nipple 6-7

MS20822-6 Elbow 6-9 STD-1 48 Nipple 6-8

9-5

~AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-BBO SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES



STD-1 60 Washer 1-12 STD-670 Nut 4-11










STD-1 60 Washer 6-8 STD-684 Nipple 3-10


STD-1 60 Washer 7-5 STD-692 Screw 3-10

STD-1 60 Washer 7-9 STD-692 Screw 4-9

STD-208 Seal 2-13 STD-692 Screw 4-11

STD-213 Seal 2-15 STD-692 Screw 6-9





STD-294 Gasket 2-9 STD-713 Pin 5-1

STD-294 Gasket 2-11 STD-761 Pin 4-7















STD-475 Washer 4-3 STD-949 Bushing 7-7


STD-475 Washer 4-7 STD-1 002 Ring 2-5

STD-475 Washer 5-5 STD-1 006 Ring 2-5

STD-475 Washer 6-7 STD-1 045 Gasket 1-3

STD-475 Washer 7-11 STD-1 065 Dowel 1-5

STD-514 Dowel 1-1 STD-1 084 Screw 6-9

STD-551 Plug 6-1 STD-1 204 Bolt 2-7

STD-553 Screw 4-11 STD-1 204 Bolt 6-1

STD-557 Dowel 1-1 STD-1 204 Bolt 7-5

STD-596 Nut 1-12 STD-1211 Plug 1-5

STD-665 Screw 7-9 STD-1215 Bolt 2-7

STD-670 Nut 3-10 STD-1215 Screw 4-11

STD-670 Nut 4-9 STD-1215 Bolt 6-1

9-4

rl~7AVCO LYCOMING 1O, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES



STD-1215 Bolt 6-3 STD-1727 Washer 4-7

STD-1221 Ring 1-10 STD-9727 Washer 5-1


STD-1 339 Plug 1-1 STD-1763 Locknut 6-5

STD-1 339 Plug 2-1 STD-1763 Locknut 6-7

STD-1339 Plug 2-7 STD-1774 Pin 2-3

STD-1339 Plug 6-13 STD-1774 Pin 2-13

STD-1373 Insert 6-7 STD-1 774 Pin 2-15

STD-1 409 Nut 1-12 STD-1815 Nut 7-3

STD-1 409 Nut 2-7 STD-1821 Hose 3-10

STD-1410 Nut 1-10 STD-1838 Bolt 2-3

STD-1410 Nut 2-3 STD-1838 Bolt 2-5

STD-1410 Nut 2-5 STD-1838 Bolt 5-1

STD-1410 Nut 2-15 STD-1851 Bolt 5-1


STD-1410 Nut 4-1 STD-1872 Insert 3-1


STD-1410 Nut 4-5 STD-1874 Screw 4-11

STD-1410 Nut 4-7 STD-1874 Screw 4-13

STD-1410 Nut 5-5 STD-1875 Bolt 2-7

STD-1410 Nut 6-5 STD-1882 Screw 2-15

STD-1410 Nut 6-7 STD-1 889 Bolt 5-5

STD-1411 Nut 1-12 STD-1896 Screw 7-5

STD-1411 Nut 2-5 STD-1901 Stud 6-1

STD-1411 Nut 2-9 STD-1 902 Bolt 6-7

STD-1411 Nut 2-13 STD-1 902 Bolt 7-11

STD-1411 Nut 3-5 STD-1 904 Bolt 2-7

STD-1411 Nut 3-7 STD-1 905 Bolt 2-7

STD-1411 Nut 4-11 STD-1 907 Screw 6-5

STD-1411 Nut 6-1 STD-1 908 Washer 6-6

STD-1411 Nut 6-11 STD-1916 Screw 3-8

STD-1411 Nut 7-9 STD-1916 Screw 6-11

STD-1414 Bolt 1-12 STD-1925 Screw 3-7



STD-1419 Bolt 1-12 STD-1930 Hose 2-3

STD-1419 Bolt 6-1 STD-1 930 Hose 2-5

STD-1419 Bolt 7-9 STD-1931 Bolt 2-7

STD-1 420 Nut 2-7 STD-1932 Bushing 7-1

STD-1420 Nut 5-1 STD-1 946 Bolt 7-9

STD-I 420 Nut 5-5 STD-2043 Nut 7-1

STD-1623 Insert 1-1 STD-2044 Nut 4-9

STD-1 646 Bolt 1-12 STD-2060 Bolt 7-3

STD-1663 Hose 7-9 STD-2078 Dowel 1-5

STD-1667 Ring 2-5 STD-2084 Bolt 1-12

STD-1685 Nut 7-9 STD-2090 Nut 3-8

STD-1685 Nut 7-11 STD-21 50 Bolt 2-7

STD-1686 Screw 3-10 STD-21 56 Bolt 5-5

STD-1727 Washer 4-1 STD-2166 Elbow 6-5

STD-1727 Washer 4-3 STD-2166 Elbow 6-7

9-7

~AVCO LYCOMING 10, LIO, HIO, TID, AEIO-38D SERIES PARTS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENG~NES

NUMERIGAL INDEX (Cont.)


STD-2167 Screw 1-8 50-15 Stud 1-1

STD2168 Nut 1-8 383-8 Nut 3-8

STD-2180 Hose 3-10 1028-8 Ball 1-3

10620039-58 Lead Assy. 4-5 1102 Plug 1-1

10620039-72 Lead Assy. 4-5 1102 Plug 1-5

10-620039-74 Lead Assy. 4-5 1102 Plug 2-1

10 620039-104 Lead Assy. 4-5 1102 Plug 2-3

10-620039-100 Lead Assy. 4-5 1102 Plug 3-1

10-620044-84 Lead Assy. 4-5 1102 Plug 6-1

10 720631-48 Lead Assy. 4-5 1102 Plug 6-4

10720631-78 Lead Assy. 4-5 1102 Plug 6-5

10720632-48 Lead Assy. 4-13 1102 Plug 6-8

10-720633-48 Lead Assy. 4-5 1182-83 Spark Plug 4-7

10--720633-78 Lead Assy. 4-5 1182-04 Spark Plug 4-5

25(38 Stud 3-1 1182-G6 Spark Plug 4-5

25C9 Stud 3-1 1182-J3 Spark Plug 4-11

25C-10 Stud 2-9 1182-J3 Spark Plug 4-13

25C-12 Stud 2--1 1182-K4 Spark Plug 4-9

2~C22 Stud 2-1 1182-N3 Spark Plug 4-11

31C12 Stud 1-1 1182-N3 Spark Plug 4-13

:31C 12 Stud 2-1 1182-N4 Spark Plug 4-13

31C12 Stud 3-1 1182-05 Spark Plug 4-11

:f 1C-12 Stud 6-1 1182-U5 Spark Plug 4-5

31C-12 Stud 6-7 1540 Plug 2-11

3 7 ~-13 Stud 1-1 8313 Gasket 2-13

31C-13 Stud 2-1 60009 Key 3-5

31C-13 Stud 3-1 60028 Guide 3-1

3 t C-14 Stud 1-1 60096 Gasket 2-15

31C-14 Stud 2-3 60398 Bushing 3-7

31C-14 Stud 2-5 60430 Cover 2-13

31C-14 Stud 6-1 60733 Shim 7-3

31C-14 Stud 6-7 60746 impeller 2-7

31C-15 Stud 6-7 60803 Strap 1-12

31C 16 Stud 1-1 60828 Plug 3-3

31C-t6 Stud 2-1 60886 Belt 5-3

31C-16 Stud 2-3 61084 Spring 1-3

31C17 Stud 6-1 61098 Adapter Assy. 2-13

31C-18 Stud 2-1 61155 Gear 1-6

31C-19 Stud 2-1 61156 Lockplate 1-6

31C-22 Stud 6-1 61163 Gear 4-1

31C-24 Stud 7-1 61163 Gear 4-3

31C-25 Stud 6-1 61163 Gear 4-7

31(3-27 Stud 6-1 61166 Thrust Button 2-7

3tC-35 Stud 1-1 61166 Thrust Button 2-13

31CD-t2 Stud 1-1 61166 Thrust Button 2-15

31CD17 Stud 2-1 61173 Gasket 2-9

31CD 22 Stud 2-1 61174 Shaft 2-7

38-13 Stud 1-1 61183 Gasket 2-13

38 22 Stud 11 61247 Cover 3-7

380 17 Stud 1-1 61260 Flange 3-8

9-8

LYCOMING 10, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FtANGE CRANKCASE MODEL ENGINES



61400 Stud 2-1 69510 Housing 2-9

61400 Stud 6-1 69532 Seat 3-5

61503 Sleeve 3-5 69551 Gasket 1-10

61510 Plug 1-5 69602 Connection 6-1

61544 Plunger 1-8 69603 Hose 6-3

61548 Nameplate 6-1 69675 Connector 2-11

61665 Gear 4-3 69796 Dowel 1-1

61665 Gear 4-7 70003 Pipe 6-3

62224 Gasket 4-1 70310 Seal 3-5

62224 Gasket 4-3 70419 Bracket 5-1

62224 Gasket 4-7 70455 Gasket 1-10

62388 Cap 3-5 70484 Screen 6-1

62417 Plug 2-11 70485 Pipe 6-3

62817 Screen Assy. 2-9 71140 Fitting 2-11

62833 Regulator 5-3 71265 Rocker Assy. 3-7

62!)22 Seal 3-5 71266 Rocker Assy. 3-7

65007 Retainer 1-1 71481 Ring 3-8

65321 Gasket 3-8 71549 Washer 3-7

65441 Seat 3-5 71596 Washer 1-10

65614 Plug 3-10 71 596 Washer 2-3

65614 Plug 4-13 71596 Washer 2-13

66224 Gasket 6-5 71610 Hook 3-10

66224 Gasket 6-7 71611 Retainer 3-10

66610 Bushing 3-1 71620 Bolt 2-11

66670 Bushing 3-1 71623 Washer 2-11

66713 Guide 3-1 71712 Pipe 6-3

66728 Washer 3-5 71713 Pipe 6-3

66731 Cover 3-7 71744 Generator 5-3

66732 Gasket 3-7 71745 Regulator 5-3

66796 Insert 3-1 71894 Seat 3-1

67114 Bushing 3-7 71903 Bushing 1-6

67193 Gasket 3-7 71907 Washer 1-6

67195 Flange 3-8 71910 Clamp 4-11

68129 Gasket 6-7 71973 Gasket 6-3

68315 Gasket 2-3 72050 Key 3-5

68315 Gasket 2-5 72053 Gasket 1-10

68317 Shaftgear 1-10 72053 Gasket 2-3

68484 Tube 1-5 72057 Seat 3-1

68593 Spacer 2-13 72058 Seat 3-1

68759 Tube Assy. 3-10 72059 Gasket 1-3

68760 Tube Assy. 3-10 72060 Bushing 1-5

68761 Tube Assy. 3-10 72061 Bushing 1-5

68767 Generator 5-3 72062 Bushing 1-6

68795 Cover Assy. 3-7 72074 Bushing 1-5

69106 Cover 1-10 72075 Seal 1-3

6’3159 Adapter Assy. 2-15 72091 Ring 1-3

6 ’3164 Gasket 215 72158 Bushing 1-1

69260 Insert 3-1 72205 Regulator 5-3

69335 Plug 6-1 72212 Seat 3-1

69444 Rocker Assy. 3-7 72231 Gear Assy. 2-15

9-9

~AVCO LYCC)MING 1O, LIO, HIO, TIG, AEIO-360 SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES

NUMERICAL INDEX (Cont.\


72255 Shroud Assy. 3-5 73434 Rod Assy. 3-7

72312 Ring 1-3 73435 Rod Assy. 3-7

72343 Stabilizer 3-1 73436 Rod Assy. 3-7

72344 Stabilizer 3-1 73437 Rod Assy. 3-7

72351 Screw 4-9 73455 Rod Assy. 3-7

72351 Screw 4-11 73456 Rod Assy. 3-7

72351 Screw 4-13 73457 Rod Assy. 3-7

72376 Elbow 7-5 73458 Rod Assy. 3-7

72376 Elbow 7-11 73553 Rod Assy. 3-7

72377 Elbow 6-11 73554 Rod Assy. 3-7

72377 Elbow 6-12 73555 Rod Assy. 3-7

72377 Elbow 7-7 73556 Rod Assy. 3-7

72377 Elbow 7-11 73557 Rod Assy. 3-7

72378 Cover 1-10 73558 Rod Assy. 3-7

72378 Cover 2-3 73772 Nozzle Assy. 1-1

72390 Elbow 7-9 73810 Bushing 1-6

72413 Fitting 2-11 73818 Gasket 2-1

72495 Gear 4-1 73843 Clamp 6-11

72566 Gear 1-3 73857 Ring 3-3

72626 Shaft 3-7 73876 Valve 3-5

72702 Tube Assy. 3-10 73937 Fuel Injector 6-5

72703 Tube Assy. 3-10 73938 Valve 3-5

72801 Counterweight Ass~. 1-6 73944 Elbow 7-5

72815 Bracket 4-11 73966 Spacer 3-7

72815 Bracket 6-12 73966 Spacer 6-5

72834 Cover 3-10 73966 Spacer 6-10

72877 Body 1-3 74065 Ring 1-3

72962 Thrust Button 2-13 74068 Ring 1-3

72970 Gear Assy. 2-13 74070 Elbow 2-3

73027 Tube Assy. 3-10 74070 Elbow 2-5

73032 Gasket 6-7 74070 Elbow 6-9

73061 Body 1-3 74070 Elbow 6-11

73136 Bracket 6-9 74117 Bracket 7-9

73136 Bracket 6-10 74139 Adapter Assy. 6-3

73136 Bracket 6-11 74230 Guide 3-1

73143 Elbow 2-11 74241 Ring 3-3

73143 Elbow 7-11 74291 Regulator 5-3

73152 Bracket 4-9 74292 Regulator 5-3

73152 Bracket 6-9 74323 Strut 5-1

73152 Bracket 6-11 74324 Bracket 5-1

73161 Spacer 6-5 74325 Link 5-1

73161 Spacer 6-7 74384 Sump Assy. 6-1

73249 Washer 1-10 74494 Plate 3-8

73250 Washer 1-10 74556 Fuel Injector 6-5

73251 Washer 1-10 74597 Bracket 6-5

73252 Washer 1-10 74598 Bracket 6-5

73314 Gasket 7-5 74636 Rocker Assy. 3-7

73319 Hose Assy. 7-11 74637 Bushing 3-7

73346 Flange 6-3 74661 Relay 5-3

73383 Lockplate 5-1 74708 Crankshaft 1-5

9-10

~IAVCO LYCOMING 10, LIO, HIO, TIG, AEIO-36O SERIES PARTS CATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES



74710 Tube 1-5 75736 Tube 1-3

74711 Plug 1-5 75739 Nipple 2-3

74804 Relay 5-3 75739 Elbow 7-7

74808 Tube Assy. 3-10 75767 Tube 1-3

74842 Spacer 6-5 75838 Guide 3-1

74847 Fuel Injector 6-7 75888 Stud 2-1

74849 Elbow Assy. 6-7 75906 Gasket 3-7

74880 Alternator Assy. 5-3 75924 Shaftgear 2-15

74887 Spacer 3-8 75944 Valve Assy. 2-9

74966 Crankshaft 1-5 75965 Clamp 4-1

74996 Gear Assy. 1-8 75965 Clamp 4-3

75009 Bracket 6-5 75965 Clamp 4-5

75009 Bracket 6-8 76026 Belt 5-3

75030 Support Assy. 1-3 76028 Link 5-1

75061 Bolt 3-3 76097 Camshaft 1-6

75072 Gear Assy. 1-8 76110 Housing Assy. 2-1

75084 Tube Assy. 3-10 76111 Housing Assy. 2-1

75089 Piston 3-3 76118 Spacer 1-8

75095 Divider 6-5 76119 Shield 2-1

75095 Divider 6-7 76121 Shaft Assy. 1-8

75118 Gasket 3-8 76143 Housing Assy. 2-1

75118 Gasket 7-1 76144 Housing Assy. 2-1

75130 Adapter Assy. 6-7 76145 Housing Assy. 2-1

75149 Tube Assy. 3-10 76157 Belt 5-3

75153 Adapter. Assy. 2-3 76165 .Alternator Assy. 5-3

75154 Stud 1-1 76167 Alternator Assy. 5-3

75157 Crankshaft 1-5 76220 Stud 1-12

75165 Clip 2-3 76302 Pump 2-5

75165 Clip 2-5 76355 Tee 7-11

75166 Tube Assy. 2-3 76428 Crankshaft 1-5

75167 Tube Assy. 2-3 76510 Gasket 2-9

75220 Alternator Assy. 5-3 76534 Shim 5-1

75257 Gage Assy. 1-3 76539 Seat 2-9

75278 Manifold Assy. 6-5 76703 Fuel Injector 6-5

75278 Manifold Assy. 6-7 76734 Zip Straps 4-7

75279 Manifold Assy. 6-5 76734 Zip Strap 4-9

75280 Manifold Assy. 6-5 76734 Zip Strap 4-11

75337 Baffle Assy. 3-10 76772 Hose 6-13

75338 Baffle Assy. 3-10 76808 Sump Assy. 6-1

75339 Baffle Assy. 3-10 76868 Bracket 6-9

75380 Link 5-1 76868 Bracket 6-10

75444 Adapter Assy. 6-4 76923-48870-63 Lead Assy. 4-11

75447 Nipple 6-5 76923-48890-63 Lead Assy. 4-11

75447 Nipple 6-8 76923-48890-63 Lead Assy. 4-12

75545 Adapter Assy. 2-3 76923-488110-63 Lead Assy. 4-11

75560 Bushing 1-5 76923-728110-63 Lead Assy. 4-11

75561 Bushing 1-6 76961 Clamp 4-7

75608 Flange 7-1 77194 Fuel Injector 6-7

75686 Elbow 6-12 77309 Bushing 1-8

75735 Tube 1-3 77309 Bushing 2-15

9-11

~AVCO LYCOMING 10, LIO, HIO, TIG, AEIO-380 SERIES PAATS CATALOGWIDE CVLINDER FLANGE CRANKCASE MODEL ENGINES

NUMERICAL INDEX (Cont.S


77410 Bracket 4-11 77874 Gear Assy. 1-10

77416 Plug 1-5 77875 Gear 1-10

77417 Crankshaft 1-5 77885 Fuel Injector 6-7

77443 Fuel Pump 2-15 77895 Elbow Assy. 6-7

77446 Pipe 7-1 77911 Valve 7-1

77450 Rod Assy. 3-3 77915 Elbow 6-8

77453 Pipe 7-1 77917 Tee 7-7

77455 Pipe 7-1 77920 Fuel Injector 6-7

77457 Pipe 7-1 77926 Tube Assy. 6-12

77458 Pipe 7-1 77947 Tube Assy. 7-11

77459 Pipe 7-1 77950 Tube Assy. 7-7

77478 Strut 7-3 77955 Sleeve 7-9

77479 Strut 7-3 77962 Adapter 1-3

77480 Strut 7-3 77997 Housing Assy. 2-1

77481 Bracket 7-3 78025 Bracket 6-13

77499 Transition Assy. 7-1 78059 Relay 5-3

77504 Gasket 7-5 78060 Relay 5-3

77516 Housing Assy. 2-1 78067 Elbow 2-15

77528 Sump Assy. 6-1 78073 Lockplate 7-3

77544 Cylinder Head 3-1 78077 Flange 7-1

77546 Hose 7-5 78084 Gasket 7-1

77547 Bracket 6-8 78126 Tube Assy. 6-12

77548 Manifold Assy. 6-7 78134 Crankshaft 1-5

77569 Seal 6-3 78191 Elbow 7-9

77575 Manifold 6-13 78290 Plunger Assy. 3-5

77578 Manifold 6-13 78353 Blanket 7-3

77579 Support Assy. 1-3 78368 Pin 1-8

77611 Gasket 3-8 78524 Socker 3-5

77670 Shield 7-5 78528 Body Assy. 2-7

77674 Tube 7-9 78530 Shaft 2-7

77675 Tube 7-9 78626 Tube Assy. 1-3

77708 Washer 2-5 78741 Pipe 6-3

77720 Adapter Assy. 2-5 78742 Pipe 6-3

77743 Harness Assy. 4-9 78743 Pipe 6-3

77745 Harness Assy. 4-7 78744 Pipe 6-3

77758 Controller 7-5 78805 Manifold Assy. 6-7

77775 Tube Assy. 2-5 78844 Hose 7-9

77808 Valve Assy. 1-3 78914 Connection 6-1

77812 Duct 7-5 78981 Pipe 6-3

77813 Gasket 7-11 78982 Pipe 6-3

77814 Adapter 7-11 78983 Pipe 6-3

77822 Adapter Assy. 6-7 78984 Pipe 6-3

77851 Crankshaft 1-5 79001 Pipe 6-3

77852 Base Assy. 2-9 79002 Pipe 6-3

77853 Housing Assy. 2-9 79004 Pipe 6-3

77872 Bushing 1-10 79028 Tee 7-7

9-12

NI FGI

INTRO

F>6-406-3

AVCO LYCONIING

T Ia 3EiO C7A D

MTide cylinder Flange Model

i-l_i‘’-,´•´•rZ~

i

i´•U. ii liv

!1j’

i i~d: i

i’ ;I;i,r

6 ;jsa: i /1Y: 1-1 I

´•I

1i´•’i´•

r‘7

PO~ICE $iB.OO 7986

Avco LycomingWilliamsport Division 652 Oliver Streel

Avco iycomlnyiSubsldlary ol Textron Inc Williamsport, PA 17701

7171323-6181

652 Oliver Street


7171323-6181

TECHNICAL


REVISION No. PUBLICATION PUBLICATION No. PUBLICATION DATE

TIO-360-C1A6D

PC-406-3A Engines PC406-3 MARCH, 1986

This page(s) furnished herewith are intended to replace the corresponding


Previous revisions to this publication This revision consists of:

December. 1996

Page 3-8

Figure 16. Valve Assy Illustration

Avco Lycoming LiJ1Ci~l:l TIO-360-C1A6I) PI\ATS CbTI\LOC

WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINEWilliamsport Division

INTRODUCTION

This illustrated parts catalog contains a complete parts listing for the Avco Lycoming TIO-360-C1A6D wide

cylinder flange model aircraft engines.

Major assembly and sub-assembly parts of the engines are listed in the Group Assembly sections in the

general sequence of engine build up.


during overhaul.

The Numerical Index is provided for convenience in finding parts ~vhen only the part number is known.

Parts coverage of Vendor Accessories used on Avco Lycoming engines may be found in the appropriate Ven-

dor’s Parts Catalog. A list of these publications appear in the latest edition of Service Letter No. L114.

NOTE

The illustrations, pictures and drawings shown in this publication are typical of the subject matter they por-

tray.

This catalog, when used in conjunction with the appropriate overhaul manual, shall be used forparts identifica-

tion only. Under no circumstances shall this catalog be used as an assembly or installation document.

Any reference in this document to a supplierslparts manufacturers’ product, by name, trademark, part

number or other description i;s solely for the purposes of identification and does not indicate or infer that Avco

Lycoming accepts responsibility for quality control andlor airworthiness of parts which do not pass through the

Avco Lycoming quality control system.


Although the information contained in this parts catalog is up-to-date at time of publication, users are urged to

keep abreast of later information through all Avco Lycoming distributors or from the factory by subscription.

Consult the latest edition of Service Letter No. L114 for subscription information.

HOW TO ORDER PARTS

In ordering parts for your engine, observe the following instructions which will expedite shipment of correct

parts required without delay.

a. Always specify the model and serial number of your engine.

b. Always specify Part Number, Nomenclature and quantity required.

Avco Lycoming TIO-360-C1116D PARTS CATALOGWilliamsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE

TABLE OF CONTENTS

SECTION PAGE

Introduction

Table of Contents

Oversize and Undersize Parts................._

1. CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUPCrankcase Assembly ................._

Oil Level Gage Assembly........._

Crankshaft, CamshaftandRelated Parts 1.5Crankcase Related Parts

................._

Propeller GovernorDriveAssembly 1,9Crankshaftand Fuel Pump Idler Gears ~1-11Crankcase AttachingParts 1-13


Accessory HousingAssembly 2~1Oil Pump Assembly and Accessory HousingAttaching Parts 2.3Fuel Pump Assembly and Attaching Parts

........._ 2.5

VacuumPump Drive and Cover........._ 2.6

Oil FilterAssembly andOil Cooler BypassValve 2.7


Connecting Rods, Pistons and RingAssemblies 3.1Cylinder AssemblyCylinder Related Parts

Valve Asserribly .........,..._.._

Cylinder Head DrainTubes and Intercylinder Cooling Baffles 3-9

4. IGNITION SYSTEM

DualMagneto, Magneto Driveand Spark Plugs........._,

4.1

5. ELECTRICAL COMPONENTSAlternatorand Belt

........._,,,, ........._,.

StarterMotor and AttachingParts 5~270 Amp Alternator Mountingand Attaching Parts 5.3100 AmpAlternator Mountingand AttachingParts 5.5

6. OIL SUMP AND INDUCTION SYSTEMOil SumpAssembly andOil Suction Screen 6~1Intake Pipes and Adapter Assembly 6.3Fuel Injector, Fuel Manifolds and Injection Nozzles

............._6.5

Nozzle Vent Manifolds and Attachments 6.7

7. TURBOCHARGER AND EXHAUST SYSTEMExhaust Manifolds and Transition Assembly ,........_,,,_ 7.1Turbocharger, Supportand AttachingParts 7~3

Turbocharger Hoses, Ductand Related Parts 7.5

Turbocharger Hardware andRelated Parts 7-7

8. SERVICE KIT SECTION

9. NUMERICALINDEX

Avco Lycoming TIO-360´•C1A60 PI\RTS CATALOG

WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINEWillismsport Division



P02 P05 P10 P15 P20 P30 P40 P50 M03 M06 M10

.002 .005 .010 .015 .020 .030 .040 .050 .003 .006 .010

66670 BUSHING X X

69260 INSERT X

69796 DOWEL X

71894 SEAT X X X

71903 BUSHING 1 SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1143 FOR APPLICATION.

72155-S BUSHING X X X X

73810 BUSHING I SEE LATEST EDITION OF SERVICE INSTRUCTION NO. 1142 FOR APPLICATION.

73857 RIN~ X X

74241 RING X

75656-8 BUSHING X X X X

75657-8 BUSHING X X X

LW-1 2688 SEAT X X X

LW-13683 BEARINGXXX

LW-13885 BEARING

LW-14045-P05SQ GUIDE, EXHAUST X

LW-14045-P10S* I GUIDE,EXHAUST X

LW-14045-P20S GUIDE, EXHAUST I I X

LW-14045-P30S GUIDE, EXHAUST I I I I X

LW-14045-P40S GUIDE, EXHAUST I I I I X

LW-15628 SEAL

LW-18753- P05S GUIDE, INTAKE X

LW-18753-P10S** GUIDE, INTAKE X

LW-18753-P20S* GUIDE, INTAKE I I I I X

LW-18753-P30S* GUIDE, INTAKE I I I X

LW-18753-P40S GUIDE, INTAKE I I I I I I I X


Studs available in PO3, P07 and P12.

A Supplied with P/N LW-19299 Retaining Ring.

**’Supplied.with P/N LW-19298 Retaining Ring.

NOTE

When ordering oversize and undersize parts, be sure to specify the required oversize and undersize dimension along with the proper

part number. For example, to order bearing LW-13885 in .003 undersize, order part number LW-13885-M3. Oversize code letter is

"P" while undersize code letter is "M". These letters are then followed by the number designating the size in thousandths of an

inch.

Avco Lycoming CiJ:Ci~l:l TIO-360-C146D PARTS CATALOG

Williamsport Division WIDE CYLINDER FLANGE CRANKCASE´• MODEL ENGINE

CRANKCASE, CRANKSHAFI AND CAMSHAFT GROUP

CRANKCASE ASSEMBLY

FIG. QUANTITYREF. PART PER

1 NUMBER DESCRIPTION ASSEMBLY

1 LW-14666S CRANKCASE ASSEMBLY 1

2 75154 STUD, 1/2-13 x 10-1/32 long 2

3 50-15 STUD, 1/2-20 x 1-7/8 long 8

4 38-13 STUD, 3/8-16 x 1-5/8 long 16

5 380-17 STUD, 3/8-16 x 2-1/8 long, drilled 1

6 31C-12 STUD, 5/16-18 x 1-1/2 long 2

7 31C-13 STUD, 5/16-18 x 1-5/8 long 1

8 38-22 STUD, 3/8-16 x 2-3/4 long 1

9 STD-557 DOWEL, 1/2 dia. x 19/32 long, hollow 2

10 72158 BUSHING, Governor drive idler shaft 1

11 STD-514 DOWEL, 5/16 dia. x1/2 long 2

12 169796 DOWEL, Crankshaft bearing 2

13 1102 PLUG, 1/8-27 NPT, Alien head 4

14 STD-1623 INSERT, 1/4-20 Heli-coil x 3/8 long 2

15 65007 RETAINER, Shroud tube seal 8

16 STD-1339 PLUG, 1/16-27 NPT, Alien head 1

17 31C-16 STUD, 5/16-18 x 2.00 long (driven height of studs, 1.31) 4

18 73772 NOZZLE ASSY., Piston cooling 4

1-1

Avco Lycoming TIO-36D-C1A60 PARTS CATALOG


16

ie

\C.I=-zia I

_i_,

1.ic

137 "~3\112 j 6

~FI:

1´•~ 9~5 11

i!/ I~

aii. /15I i

D

ii/

1;

g-/

O 1\‘jj r’"i

ii-iII!?

34

P i~ ~"F

Figure 1. CRANKCASE ASSEMBLY

1-2

Avco Lycoming LiJ:Ci~l:l TIO-360-C1A6D PIIRTS CI\TI\LOC

Willi´•amsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE

CRANKCASE, CRANKSHAFT AND CAMSHAFT GROUPOIL LEVEL GAGE ASSEMBLY

FIO, QUANTITYREF, PART PER


1 72059 GASKET, Oil level gage 1

2 LW-12789 TUBE ASSY., Oil level gage 1

3 75767 TUBE, Oil level gage 1

4 77527 EXTENSION, Oil filler 1

5 72220 GASKET, Oil level gage 1

6 72312 RING, Oil seal, 1.00 l.D. x 1/8 section 1


1-3

Avco Lycoming TIO-380-C1A6D PARTS CATALOG

Williamsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE

2

i/

i

/xei i i,

I~"3~’

~’_J-Jirl

O

Figure 2. OIL LEVEL CAGE ASSEMBLY

Avco Lycoming riS~C TIO´•360-C11\60 PdRTS CI\TALOG


ORANKCASE, CRANKSHAFT AND OAMSHAFT GROUP

~CRANKSHAFT, CAMSHAFT AND RELATED PARTS



1 LW-17338 CRANKSHAFT COUNTERWEIGHT ASSEMBLY 1

2 LW-17326 CRANKSHAFT PLUG ASSEMBLY 1

3 LW-14529 PLUG, 2-1/16 dia., expansion 1

4 1102 PLUG, 1/8-27 NPT, Align head 1

5 STD-2078 DOWEL, 3/8 O.D, x 1/2 long 1

6 74711 PLUG, 1-1/4 O.D., 1/8 NPT 1

7 75657 BUSHING, Propeller flange, indexing 1

8 72155 BUSHING, Propeller flange, short 1

9 75656 BUSHING, Propeller flange, long 4

10 73810 BUSHING, Crankshaft dynamic ct’wt. 4

11 172801 COUNTERWEIGHT ASSEMBLY 2

12 71903 BUSHING, Dynamic counterweight 8

13 LW-10977 ROLLER, Dynamic counterweight, 8th order 2

14 LW-10945 ROLLER, Dynamic counterweight, 6.3 order 2

15 LW-14820 RING, Internal retaining 8

16 71907 WASHER, Dynamic counterweight 8

17 LW-18847 CAMSHAFT ASSEMBLY 1

18 76118 SPACER, Tachometer shaft centering 1

19 LW-1 0284 GEAR, Crankshaft 1

20 LW-10332 LOCKPLATE, Crankshaft gear 1

21 AN8-14A BOLT, 1/2-20 x 1-19/32 long, hex. head 1

22 77579 SUPPORT ASSY., Starter ring gear, 12/14 pitch 1

23 72566 GEAR, Starter ring, 12/14 pitch 1

24 74977 SUPPORT ASSY., Starter ring gear, 12/14 pitch (dual groove) 1

25 72566 GEAR, Starter ring, 12/14 pitch 1


27 LW-18667 PIN, 3/16 dia. x 2-21/64 long 1

28 1 MS16625-1081 RING, Internal retaini 1

1-5

Avco Lycaming TIO-360-C1A6D PARTS CATALOG


2325

´•:~)Z 22.24

~B ls157

i~S6

a

12 4

Itj-

j,

CRANKPIN-9

7

INDEX

\-21

Figure 3. CRANKSHAFT, CAMSHAFT AND RELATED PARTS

1-6

Avco Lycoming Lij:Ci~ TIO-360-elA6D PARTS CIITALOG

Williamsport Divrsion WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE


CRANKCASE RELATED PARTS

FIG. QUANTITY

REF. PART PER


1 10288 BALL, 11/16 dia. 1

2 61084* SPRING, Oil pressure relief valve 1

LW-11713* SPRING, Oil pressure relief valve 1

68668* SPRING, Oil pressure relief valve 1

77467* SPRING, Oil pressure relief valve 1

LW-18085~k SPRING, Oil pressure relief valve 1

3 STD-1045 GASKET, 1-1/4 I.D, x 1-1/2 O.D. x 3/32 annular 1

4 77808 VALVE ASSY., Oil pressure relief, adjustable 1

5 LW-1 3683 BEARING, Crankshaft 4

6 LW-1 3885 BEARING, Crankshaft, front 2

7 LW-15628 SEAL, Crankshaft oil, solid 1

78443 SEAL, Crankshaft oil, split 1

8 72075 SEAL, Oil, 3/32 section x 15/32 I.D. 2

9 72091 RING, Oil seal, 23/64 I.D. x 3/32 dia. section 2

10 73061 BODY, Hydraulic tappet 8

Select spring to give a minimum of three threads exposed on adjusting screw to allow field adjustment. Reference latest revision of

SSP-1776, Part I for spring identification.

1-7

Avco Lycoming Lir):Ci;T´•l:l TIO-360-C1A6D PARTS CATALOG


401

Ce’1P

r( iiL:

i.-

’r ~sl /"cJ’i

r´•i~

’Y ii",ii

b;: j

´•i i

j- ´•i?~ ‘i"l

v8:~´•u (C!

.h

n

12

i;c)

,_dZ. tre liii: ii j.j~3 ‘~;1

,F ~:cJ,a’´•jI-),i

Figure 4. CRANKCASE RELATED PARTS

1-8

Avco Lycoming TIO-360-C1860 P~RTS CIITALOG



PROPELLER GOVERNOR DRIVE ASSEMBLY

FIG. QUANTITY

REF. PART PER


1 77875 GEAR, Prop. governor driven 1

2 LW-14021 SHAFT, Prop. governor idler gear 1

3 77874 GEAR ASSY., Prop. governor idler 1

4 77872 BUSHING, Prop. governor idler gear 2

5 STD-19 DOWEL, 3/32 dia. x 7/32 long 1

6 STD-798 DOWEL, 3/32 dia. x 9/32 long 1

7 73249 WASHER, Thrust AR




8 AN565B1032H5 SET SCREW, No. 10-32 x 5/16 long 1

9 70455 GASKET, 25/32 I.D. x 1-1/8 O.D, x 1/16 thick 1

10 1 LW-13896 PLUG, 3/4-16 hex. head 1


12 72378 COVER, Governor drive 1



15 ISTD-1410 NUT, 5/16-18 plain 4

1-9

Avco Lycoming L i ~:C ~:I TIO-360-C1A60 PARTS CATALOG


15

12

C /11 ´•~;ri"

C, 8

0:I

I 1

n’fn

loc!4

Figure 5. PROPELLER GOVERNOR DRIVE ASSEMBLY

1-10

Avco Lycoming TIO-360-Cld60 PI\RTS CITALOC

Williamsport Division WIDE GYLINDER FLANGE CRANKCASE MODEL ENGINE


GRANKSHAFT AND FUEL PUMP IDLER GEARS

FIG. QUANTITY

REF. PART PER



2 LW-10299 SHAFT, Crankshaft idler 1


4 LW-10298 SHAFT, Crankshaft idler 1

5 LW-10323 GEAR ASSY., Fuel pump idler 1

6 LW-10298 SHAFT, Fuel pump idler 1

7 LW-10327 SHAFT GEAR ASSY., Fuel pump drive 1


9 69164 GASKET, Fuel pump adapter 1

10 69159 ADAPTER ASSY., Fuel pump drive 1

11 STD-1774 PIN, 1/8 dia. x 1/4 long 1

12 STD-213 SEAL, Oil, 3/4 I.D. x 1-3/8 O.D.

1-11



’7

i\i3’ i.v8CL~I31\,

11II/i

j~il

D

Figure 6. CRANKSHAFT AND FUEL PUMP IDLER GEARS

1-12


Will)amsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE


CRANKCASE ATTACHING PARTS

FIO. (1UANTITYREF. PART PER


1 LW-25-1.50 BOLT, 1/4-20 x 1-1/2 long, hex. hd. 7


3 60803 STRAP, Lifting 2

4 LW-25-1.75 BOLT, 1/4-20 x 1-3/4 long’, hex. hd. 2

5 LW-25-1.13 BOLT, 1/4-20 x 1-1/8 long, hex, hd. 4


7 STD-1411 NUT, 1/4-20 plain 9

8 LW-25S1.50 BOLT, 1/4-20 x 1-1/2 long, hex, hd. dr, end 39 STD-8 WASHER, 1/4 plain (max. 9) AR

10 STD-1409 NUT, 1/4-20 slotted shear 311 ISTD-33 WASHER, 3/8 plain 312 AN960-616L WASHER, 3/8 plain (thick) (max. 3) AR13 ISTD-872 NUT, 3/8-24 slotted 1

14 AN6-34A BOLT, 3/8-24 x 3-37/64 long, hex. hd. 2

15 ISTD-33 WASHER, 3/8 plain 216 ISTD-678 WASHER, 3/8 lock, internal teeth 217 ISTD-596 NUT, 3/8-24 plain 2

18 76220 STUD, 1/2-20 x 10-45/64 long 4

19 ISTD-35* WASHER, 5/16 plain 520 1 STD-475 WASHER, 5/16 lock, internal teeth 121 1 STD-1838 BOLT, 5/16-18 x 15/16 long, hex. hd. 1

Install in center hole at rear alternator attaching pad.

1-13

Avco Lycoming TIO´•360-C11\60 PbRTS CI\TBLOG


2,4,7 9 3 r 6,7 1, 2,87 9

2,6,7,9

5,6,7,9

O

18

14, 16,17

rl r’:

1, 2,6,7,9--~ ~--19, 20, 21\L 2,56, 9 8, 10


1-14

Avco Lycoming TIO-360-C11\6D PBRTS CI\TBLOG

Williamsport Division WIDE CYLINDER FLANGE CAANKCASE MODEL ENGINE



FIG. QUANTITY

REF. PART PER


1 73818 GASKET, Accessory housing

2 LW-10888 HOUSING ASSEMBLY, Accessory 1

3 25C-12 STUD, 1/4-20 x 1-1/2 long 4

4 31C-13 STUD, 5/16-18 x 1-5/8 long 2

5 LW-12589 INSERT, Hell-coil, 5/8-18 x 3/8 long 1

6 MS124703 INSERT, Heli-coil, 3/4-16 x 1-1/8 long 1

7 LW-10341 INSERT, Hell-coil, 1.00-14 x 3/8 long 1

8 76119 SHIELD, Accessory breather, oil 1

9 75888 STUD, 1/4-20 x 1-1/4 long 6

10 310-19 STUD, 5/16-18 x 2-3/8 long 4

11 STD-1339 PLUG, 1/16-27 NPT, Alien head 1

2-1

Avco Lycoming TiO-g6o-ClAso PARTS CATALOG


3

liii3\(9

u/II //liL~,Q

(9

;e

i‘ !I

‘eI

O

~9

Figure 8. ACCESSORY HOUSING ASSEMBLY

2-2

Avco Lycomin9 Li~iiT´•l:l TIO-36,C1A6D PI\RTS GIITIILOC

Wllliamsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE



FIG. QUANTITY

REF. PART PER


1 LW-1 0342 BODY, Oil pump 1

2 LW-18110 IMPELLER ASSY., Oil pump driven 1

3 LW-14040 GEAR ASSY., Oil pump drive 1


5 LW-18109 IMPELLER. Oil pump driving 1


7 LW-31H1.75 BOLT, 5/16-18 x 1-3/4 long 3

8 LW-14260 SEAL, Oil, tachometer drive 1


10 STD-lBO WASHER. 1/4 lock, internal teeth 12

11 ILW-25-0.94 BOLT, 1/4-20 x 15/16 long, hex. head 9

12 LW-25-1.25 BOLT, 1/4-20 x 1-1/4 long, hex. head 1

13 LW-25-0.81 BOLT, 1/4-20 x 13/16 long, hex. head 2

2-3


Williamsport Division WIDE CYLINDER FLANGE GRANKCASE MODEL ENGINE

9.’10 tl 1

C

B~IE

ea \i

I~i’’ii I i\ f

L?.j l~ir

r6

/fj

i/ji~´•F1 6

8il o.l 3

9,1 o,l 2

j 9;10;11


2-4

Avco Lycoming LI1~C ii~:l TIO-360-C1A6D PACTS CATALOG



FUEL PUMP ASSEMBLY AND ATTACHING PARTS

FIG. QUANTITY

REF. PART PER


1 LW-10799 SPACER, Fuel pump insulating 1

2 LW-11166 FUEL PUMP, Fuel (RG17980-K) 1



5 STD-1410 NUT, 5/16-18 plain 4

6 AN816-6 NIPPLE, 3/8 tube, 1/4 NPT (fuel pump inlet) 1

7 MS20823-6 ELBOW, 3/8 tube, 1/4 NPT (fuel pump outlet) 45" 1

MS20822-6 ELBOW, 3/8 tube, 1/4 NPT (fuel pump outlet) 900 1

8 78067 ELBOW, 1/8 NPT, 1/4 tube, restricted 900 1

’)jQi

i/\\X/

1\

I

4

O

j I i )I

;u

i~p" ~s´•-;

o

2

Figure 10. FUEL PUMP ASSEMBLY AND ATTACHING PARTS

2-5

Avco Lycoming TIO-360-G1A6D PARTS CATALOG



VACUUM PUMP DRIVE AND COVER

FIG. QUANTITY

REF. PART PER




3 71596 WASHER, Accessory driven gear 1

4 STD-2217 SEAL, Oil, 7/8 I.D, x 1-1/2 O.D. x 5/16 wide 1

5 8313 GASKET, Vacuum pump1

6 60430 COVER, Vacuum pump1


8 STD-160 WASHER, 1/4lock, internal teeth 4

9 STD-1411 NUT, 1/4-20 plain 4

4~c/´•r\ii

5/

:-R7 ;’a o

i

o?fi3"1oj :Io

Q

3;r~4

Figure 11. VACUUM PUMP DRIVE AND COVER

2-6

Avco Lycoming C i i~:1 T10-360-C1A6D PARTS CATALOG



OIL FILTER ASSEMBLY AND OIL COOLER BYPASS VALVE

FIG. QUANTITYREF. PART PER12 NUMBER DESCRIPTION ASSEMBLY

1 72413 FITTING, Breather, 1200 elbow 12 MS29512-10 SEAL, Oil, 3/32 section x 45/64 I.D. 1

3 AN814-10L PLUG, Turbo drain back 14 STD-294 GASKET, 7/8 O.D. x 5/8 1.~. x 3/32 annular 2

5 1540 PLUG, Thermometer well 26 LW-11999 REDUCER, 7/8-14 to 9/16-18 straight thread 17 72377 ELBOW, 3/8 tube, adjustable 900 18 02A19460 NIPPLE, 3/8 tube, 7/8 thread 19 LW-10321 SPRING, Oil filter bypass valve 1

10 176539 SEAT, Oil relief valve 111 I LW-10320 SLEEVE, Oil filter bypass valve 112 IM S16625-1100 RING, Internal retaining 113 ILW-16286 FILTER ASSY., Oil, short 114 LW-13904 KIT, Converter plate, oil filter 115 75944 VALVE ASSY., Temp. control, oil cooler bypass 116 176510 GASKET, Valve assembly 1

2-7



,,r~l

c_,-n

I

_i

~;C1211?III14

13---\

33 3 Is

15

Figure 12. OIL FILTER ASSEMBLY AND OIL COOLER BYPASS VALVE

2-8

Avco Lycoming TIO-360-Clh60 PARTS CATIILOG



CONNECTING RODS, PISTONS AND RING ASSEMBLIES

FIG. QUANTITY

REF. PART PER


LW-13422 ROD ASSY., Connecting 4

2 LW-13923 BUSHING, Connecting rod, upper 4

3 LW-12596 BOLT, Connecting rod 8

4 LW-12186 NUT, Connecting rod bolt 8

5 LW-13209 BEARING, Connecting rod 8

6 LW-10545 PISTON, Compression ratio 7.3:1 4

7 LW-1 4077 PIN, Piston 4

8 LW-11775 PLUG, Piston pin 8

9 74241 RING, Piston, compression 8

10 173857 RING, Piston, oil regulator (expander type) 4

3-1

Avco Lycoming TIO-360-C1A60 PARTS CATALOG

Williamsport Division WIDE CYLINDER FL.ANGE CRANKCASE MODEL ENGINE

10

Figure 13. CONNECTING RODS, PISTONS AND RING ASSEMBLIES

3-2

Avco Lycoming Lij:Ci~:l TIO-360-C1A60 PARTS G~TI\LOG



CYLINDER ASSEMBLY



1 LW-13964 CYLINDER AND HEAD ASSY., Nitrided 4

2 LW-12688 SEAT, Intake valve 4

3 71894 SEAT, Exhaust valve 4

4 LW-18753* GUIDE, Valve, intake 4

5 LW-14045* GUIDE, Valve, exhaust (ni-resist) 4

6 69260 INSERT, Spark plug (long reach) 8

7 72706 INSERT, Heli-coil, 1/4-20 NC x 3/8 long, self-locking 8

8 250-8 STUD, 1/4-20 x 1.00 long 8

9 66670 BUSHING, Rock shaft, inner 16

10 25C-10 STUD, 1/4-20 x 1-1/4 long 16

11 I STD-1353 INSERT, Heli-coil, 10-24 x 3/8 long, notched 8

12 LW-13123 BAFFLE, Center fin pack 4


14 ISTD-1925 SCREW, 1/4-20 x 5/8 long, pan hd, self-locking 4

15 1102 PLUG, 1/8 pipe 8

16 LW-1 9298 RING, Retaining 4

17 1 LW-19299 RING, Retaining 4

Used with P/N LW-19298 Retaining Ring purchased separately.Used with P/N LW-19299 Retaining Ring purchased separately.

3-3

Avco Lycoming Lij:Ci;-T´•7~1 TIO-360-C1A60 PARTS CATALOG


A 6

1197

o

r8; ic~X I

’1111

8

~7

Figure 14. CYLINDER ASSEMBLY

3-4







73462* ROD ASSEMBLY, Push AR



2 76266 ROCKER ASSEMBLY, Valve 8

3 76242 BUSHING, Valve rocker 8

4 71549 WASHER, Valve rocker thrust 8

5 72626 SHAFT, Valve rocker 8

6 LW-11665 THRUST BUTTON, Rocker shaft 16

7 66732 GASKET, Valve rocker shaft cover 8

8 72710 COVER, Valve rocker shaft 8

9 72709 SCREW, 1/4-20 x 5/8 long, self-sealing, slotted head 8

10 75233 SEAL, "O" Ring, rocker shaft cover screw 16

11 I STD-160 WASHER, 1/4 lock 8

12 176036 GASKET, Rocker box cover 4

13 1 STD-1411 NUT, 1/4-20 plain 8

14 LW-14433 COVER ASSY., Rocker box 4

15 STD-1925 SCREW, 1/4-20 x 5/8 long, pan hd. self-locking 32

16 71481 RING, Oil seal, 3/32 dia. x 4-27/32 I.D. 4

17 174887 SPACER, 33/64 I.D. x 7/8 O.D. x 3/8 thick 2

18 383-8 NUT, 3/8-24 plain 16

19 STD-2090 NUT, 1/2-20 plain 18

20 74494 PLATE, Spark plug reach caution 4

See latest edition of Avco Lycoming Service Instruction No. 1060 for complete push rod application.

3-5

Avco Lycoming Li-$:Ci;r~l TIO-360-C1A6D PARTS CATALOG

WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINEWilllamspott Division

,/c i;2k

jjI

L1. /i;i16 /-18 i:! V--

i

.irj

5 ji!j(i/6 17

/i‘T//////~ i az 3

Ii:

i’ i

ii I iiiY~i6

2

11V/j ii´•i 4

Ilj /I-- -jl_j? i i

13

i ij-i"

i \R20

j.j1´•illIj lirI~i III

8 710

9

´•1_6 12

14

6\- 3 2\- 4 5


3-6




VALVE ASSEMBLY



1 LW-13262 VALVE, Intake (hollow stem) rotator type 4

2 LW-18497 VALVE, Exhaust (rotator type) 4

3 LW-11797 SPRING, Valve, auxiliary 8

4 LW-11796 SPRING, Valve, outer 8

5 LW-14893 SEAT, Valve spring, lower, intake 4

6 LW-14894 SEAT, Valve spring, lower, exhaust 4

7 69532 SEAT, Valve spring, upper, intake 4

8 LW-16475 SEAT, Valve spring, upper, exhaust (rotator type) 4

9 72050 KEY, Valve, intake 8

10 62388 CAP, Valve stem 4

11 I MS13997-3 KEY, Valve, exhaust (rotator type) 8

12 1 MS13998-3 CAP, Valve stem, exhaust (rotator type) 4

13 78290 PLUNGER ASSY., Hydraulic tappet 8

14 78524 SOCKET, Push rod, hydraulic tappet 8

15 LW-14018 TUBE ASSY., Push rod shroud 8

16 LW-13565 SPRING, Shroud tube 8

17 ILW-13618 SPACER, Shroud tube 8

18 ILW-13619 WASHER, 25/32 I.D. x 1-1/4 O.D. x .040-.046 thick 8

19 70310 SEAL, Shroud tube 16

3-7

Lycoming TIO-360-C1A6D PARTS CATALOG


/13 14

17

15

i:

i i,7

j:91

I

~ci

4

o/ s

12

a

Figure 16. VALVE ASSEMBLY

3-8 Revised December, 1996

TIO-360-C11\60 PARTS CATI\LOCWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE



FIG. OUANTITYREF. PART PER17 NUMBER DESCRIPTION ASSEMBLY

STD-684 NIPPLE, Straight, 3/8 I.D, hose 42 STD-2180 I HOSE, 3/8 i. D. x1-13

3 LW-15592-5-05 CLAMP, Hose 1 84 STD-1223 NIPPLE, 3/8 tube x 1/4 NPT 45 LW-13976 TUBE ASSY., Cyl. head oil drain, cyl. no. 1

6 LW-13977 I TUBE ASSY., Cyl. head oil drain, cyl, no. 2 T 17 LW-13978 j TUBE ASSY., Cyl. head oil drain, cyls. no. 3 and 4 1 28 LW-14833 BAFFLE ASSY., I

9 LW-15695 BAFFLE ASSY., Intercylinder,no.land3cy’~10 171610 HOOK, Intercylinder baffle retainer 1 211 171611 1 RETAINER, Intercylinder baffle 1 2

3-9

Avco Lycoming Li ~:1C i ~1:1 TIO-360-01A60 PARTS CATALOG


8.9

"7

10iIi 1

117 YI_

-lr

i

ii i IXo/i’ Iii

ii1i~ p

~j~iJ

i/´•o,

,i :j i-II

lii’ ii ii Si,iio/?/

2i) i I/i ´•´•o,i

/3 iii/iIc5,6,7

"e,

Figure 17. CYLINDER HEAD DRAIN TUBES AND INTERCYLINDER COOLING BAFFLES

3-10

Avco Lycoming CiJ:Ci~l:l TIO-360-C1A60 PARTS CATALOG

Williamsport Division WIDE CVLINDER FLANGE CRANKCASE MODEL ENGINE

IGNITION SYSTEM

DUAL MAGNETO, MAGETO DRIVE AND SPARK PLUGS

FiG. QUANTITYREF. PART PER


1 LW-13643 GEAR, Retainer, magneto drive 1

2 LW-13641 CUSHION, Magneto drive 2

3 LW-12681 GASKET, Magneto 1

4 LW-685124-118 MAGNETO, Ignition system, impulse D4LN-3021 1

5 LW-682555-13 MAGNETO, Ignition 1

6 LW-684407-303 HARNESS, Ignition, 3/4-20 spark plug term. st. fittings 1

7 66M19385 CLAMP, Magneto 2


9 STD-1410 NUT, 5/16-18 plain 2

10 76734 ZIP STRAP 26

11 LW-620028-2 CLIP, Two wire for 1/4 screw 2

12 lLW-16266-25-50 CLAMP 2

13 STD-1874 SCREW, 1/4-20 x 7/8 long 2


15 1182-U5* SPARK PLUG, (Champion RHB-32E) long reach 8

16 LW-382698 KIT, Magneto ground terminal 2

Item No. 15 spark plug is used in current production only; this list does not include additional spark plugs that are approved for use in these

engines. See latest edition of Service Instruction No. 1042 for complete listing of all approved spark plugs.

NOTE

Individual spark plug leads may be replaced by ordering either 10-720633-48 (2T, 4T, 18, 28, 38, 48) or

10-720633-72 (1T, 3T).

4-1

Avco Lycoming TIO-360-C11\60 PARTS GATALOGWIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE

Williamsport Division

ca

4

2

3

V’~Gu""

i

~S15v

i7

u-xL=

a (,Cn

Iq~ 107, r157--/

3/-1

114L~

Figure 18. DUAL MAGNFTO, MACNFTO DRIYE AND SPARK PLUGS

4-2

Avco Lycomin9 Lij:Ci~l:l TIO-360-C1A6D PARTS CATALOG


ELECTRICAL COMPONENTS

ALTERNATOR AND BELT



1 32819553 ALTERNATOR ASSY., 24 v.-70 amp., 3.20:1 ratio 1

2 LW-14326 ALTERNATOR, 24 v.-70 amp., (ALU-8421-LS) 1

3 36819484 PULLEY, Alternator, 3.20:1 ratio 1

4 LW-10979 ALTERNATOR ASSY., 24 v.-100 amp., 3.25:1 ratio 1

5 LW-10544 ALTERNATOR, 24 v.-100 amp., (ALV-6403LS) 1

6 76421 PULLEY, Alternator, 3.25:1 ratio 1

7 72026 BELT, Alternator drive (3/8 wide) 1

8 LW-10971 BELT, Alternator, dual idler (2 matched belts) 1

NOTE

See latest edition of Lycoming Service Instruction No. 1154 for complete listing of FAA approved starters,generators, alternators, regulators and relays.

CC~

2,5

Figure 19. ALTERNATOR AND BELT

5-1

Avco Lycoming LiJ:Ci~:l TIO-366-C1A6D PARTS CATALOG



STARTER MOTOR AND ATTACHING PARTS

FIG. QUANTITY

REF. PART PER


1 LW-15572 STARTER, 24 volt, 3.38:1 internal reduction, 12/14 pitch pinion(MHB-4016) 1




5 STD-1410 NUT, 5/16-18 plain 3

NOTE

See latest edition of Avco Lycoming Service Instruction No. 1154 for complete listing of FAA approved starters,

generators, alternators, regulators and relays.

i

3 3iAo

ij$sJ3I\\j/

1

ii´•IiI

i ~a

I

1i

a I $8,~2

5-/

Figure 20. STARTER MOTOR AND ATTACHING PARTS

5-2

Avco Lycoming Li:Ci~T´•73 TIO-360-C11\60 PARTS CI\TI\LOC






1 07A19474 BRACKET, Alternator 1

2 73383 LOCKPLATE, 5/16 bolt x 1.00 spacing 1

3 STD-1838 BOLT, 5/16-18 x 15/16 long, hex. hd. 2

4 75380 LINK, Alternator adjusting 1


6 LW-31H.75 BOLT, 5/16-18 x 3/4 long, hex. hd. drive 1

7 STD-1727 WASHER, Plain, 3/4 O.D. x 11/32 I.D. x 1/8 thick 1

8 LW-31H.75 BOLT, 5/16-18 x 3/4 long, hex, hd. drive 1

9 74323 STRUT, Alternator support 1

10 LW-31H.75 BOLT, 5/16-18 x 3/4 long, hex. hd. drive 1

11 ISTD-690 WASHER, 13/16 O.D. x 25/64 I.D. x 1/16 thick 1

12 AN6-17 BOLT, 3/8-24 x1-61/64 lg., hex. hd., drilled end 1

13 STD-690 WASHER, 13/16 O.D. x 25/16 I.D. x 1/16 thick AR


15 ISTD-713 PIN, Cotter, 3/32 dia, x 3/4 long 1

16 IAN6-16 BOLT, 3/8-24 x 1-53/64 long, hex, hd., drilled end 1

17 76534 SHIM, 1-1/8 O.D. x 13/32 I.D. x .005 thick AR

18 STD-690 WASHER, 13/16 O.D. x 25/64 I.D. x 1/16 thick AR

19 STD-872 NUT, 3/8-24, slotted 1

20 STD-713 PIN, Cotter, 3/32 dia. x 3/4 long 1

5-3

Avco Lycoming L i ~:C i i~:l TIO-360-C1A6D PARTS CATALOG


5 618´•-~

111i

Ir~i,.P

ii

d.ro7\=\s

18 B,

17

5~ 14i- 16


5-4

Avco Lycoming TIO-360-C11\60 PILRTS CI\TI\LDG


ELECTRICAL COMPBNENTS




1 LW-14141 BRACKET, Alternator, front 1

2 LW-14142 BRACKET, Alternator, rear 1

3 73383 LOCKPLAIE, 5/16 bolt x 1.00 spacing 2

4 STD-1838 BOLT, 5/16-18 x15/16 long, hex. hd. 4

5 LW-11147 BRACKET, Alternator belt adjusting 1

6 STD-1727 WASHER, Plain, 3/4 0.D. x 11/32 I.D. x 1/8 thick 1

7 LW-14637* SHIM, 13/16 O.D. x 11/32 I.D. x .005 thick AR

8 LW-14649 SHIM, 13/16 O.D, x 11/32 I.D. x .010 thick AR

9 LW-31H1.22 BOLT, 5/16-18 x 1-7/32 long, hex. hd., drilled 1

10 LW-19265 PULLEY SHAFT ASSY., Alternator dual belt adjusting 1

11 76420 PULLEY, Alternator idler, dual 1

12 78629 BALL BEARING, Double row, alt. idler pulley 1

13 lMS16625-1125 RING, Internal retaining, 1-1/4 diameter 2

14 ILW-19238 SHAFT, Alternator dual belt idler 1

15 76768 LOCKWASHER, Alternator idler pulley bearing 1

16 76769 LOCKNUT, Alternator idler pulley bearing 1

17 LW-11635 SHIELD, Idler shaft 1

18 STD-669 WASHER, 33/64 I.D. x 1.00 O.D, x 1/8 thick 1


20 STD-1727 WASHER, Plain 3/4 O.D, x 11/32 I.D, x 1/8 thick 1

21 LW-31H1.22 BOLT, 5/16-18 x 1-7/32 lg., hex, hd., drilled 1

22 LW-14637 SHIM, 13/16 O.D, x 11/32 I.D. x .005 thick AR

23 LW-10970 STRUT, Alternator support 1

24 LW-31H.75 BOLT, 5/16-18 x 3/4 long, hex, hd. drilled 1

25 LW-14650* SHIM, 7/8 O.D. x 15/32 I.D. x .005 thick AR

26 AN7-14 BOLT, 7/16-20 UNF-SA x 1-19/32 long, drilled end 1

27 ISTD-632 WASHER, 7/16 plain AR

28 AN310-7 NUT, 7/16-20 plain, slotted 1

29 STD-761 PIN, Cotter, 3/32 dia, x 1.00 long 1

30 AN7-12 BOLT, 7/16-20 UNF-3A x 1-11/32 long, drilled end 1

31 STD-632 WASHER, 7/16 plain AR

32 AN310-7 NUT, 7/16-20 plain, slotted 1

33 STD-761 PIN, Cotter, 3/32 dia, x 1.00 1

Shim as required for belt alignment between crankcase idler adjusting bracket, alternator and alternator bracket.

5-5



6 117

II 81"\ 13

17

13

I r~trll

sOo 9

20

J/

\7-VA

/24YI::::

2’’I´•´•I27

1

3


5-6

Avco Lycoming TIO-360-C11\60 PARTS CATALOG






1 LW-13353 GASKET, Oil sump 1

2 LW-15796 SUMP ASSY., Oil 1

3 69602 CONNECTION, Intake pipe 4

4 61400 STUD, 1/4-20 x 1-3/16 long 4

5 31C-14 STUD, 5/16-18 x 1-3/4 long 4

6 1102 PLUG, 1/8-27 NPT, Alien head 2

7 STD-551 PLUG, 1/2-14 NPT, square head, drilled 2



10 LW-25-1.00 BOLT, 1/4-20 x 1.00 lg. (holes nearest to c’case parting) 2


12 LW-25-1.25 BOLT, 1/4-20 x 1-1/4 long, hex, head (fuel manifolds) 2


14 ISTD-1411 NUT, 1/4-20 plain 18

15 170484 SCREEN, Oil suction 1

16 STD-111 GASKET, 1.00 I.D. x 1-1/4 O.D. x 3/32 annular 1

17 LW-12545 PLUG, 5/8 hex. hd. x 1.00-20 thread 1

6-1

Avco Lycoming CiJ:Ci~l:l TIO-360-C1A6D PARTS CATALOG


a

2~a:

O~ ~d

a o

´•.o

a

oa;

o

r´•´•,;.. O~\ o‘II

Io

o

O

r\.

9 L´•

o14-\=o i 10.11.12

.I

.P15~ Oi,3

16

b17-/

Figure 23. OIL SUMP ASSEMBLY AND OIL SUCTION SCREEN

6-2

Avco Lycoming LirECi~l:l TID´•360-C11\60 PI\RTS CATALOG



INTAKE PIPES AND ADAPTER ASSEMBLY

FIO. QUANTITY

REF. PART PER


1 LW-13944 PIPE, Intake, cylinder nos. 1 and 2 2

2 LW-13945 PIPE, Intake, cylinder nos. 3 and 4 2

3 69603 HOSE, 1-3/4 1.0. x 2-3/16 O.D. x 1-3/4 long 4

4 LW-I 5592-8-28 CLAMP, Hose 8

5 71973 GASKET, 2 bolt flange, 1-7/8 I.D. 4




9 LW-13807 ADAPTER ASSY., Fuel drain valve 2

6-3


Williamsport Division WIDE CYLINDER FIANGE CRANKCASE MODEL ENGINE

4 3 4

i

/i 16

c´•

B7

a:.

Figure 24. INTAKE PIPES AND ADAPTER ASSEMBLY

6-4




FUEL INJECTOR, FUEL MANIFOLDS AND INJECTION NOZZLES

FIG. QUANTITY

REF. PART PER


1 66224 GASKET, Fuel injector adapter 1

2 77154 GASKET, Fuel injector adapter 1

3 LW-18939 ADAPTER ASSY., Fuel injector 1

4 STD-1164 INSERT, 5/16-18 Heli-coil 4



7 STD-1410 NUT, 5/16-18 plain 4

8 LW-18943 FUEL INJECTOR, (RSA5AD1) (2524939-2) 1




12 LW-18854 NOZZLE ASSEMBLY 4

13 174200 ELBOW, 1/4 tube, 900 restricted 1

14 74369 TEE, 1/4 tube, straight thread on run (inj. outlet) 1

15 LW-19026 ADAPTER, 7/16-20 straight thread to 1/8 NPT 1

16 77915 ELBOW, 1/8 NPT to 3/16 tube, restricted 1

17 1 LW-12876-48-172 HOSE ASSY., Injector outlet tee to manifold, right 1

18 LW-12878-43-176 HOSE ASSY., Injector outlet tee to manifold, left (17-3/4’’ long) 1

LW-12878-43-200 HOSE ASSY., Injector tee to manifold, left (20" long) 1

19 LW-18963 MANIFOLD ASSY., Fuel, right 1

20 ISTD-2166 ELBOW, Union, 90" 1

21 iMS20822-4 ELBOW, 1/4 tube, 900 1

22 STD-148 NIPPLE, Union, 1/8 tube 1

23 1102 PLUG, 1/8 NPT, Alien head 1

24 LW-18964 MANIFOLD ASSY., Fuel, left 1

25 ISTD-2166 ELBOW, Union, 900 1

26 IMS2O822-4 ELBOW, 1/4 tube, 900 1

27 STD-148 NIPPLE, Union, 1/8 tube 1

28 1102 PLUG, 1/8 NPT, Alien head 1

29 LW-12098-1-146 TUBE ASSY., Fuel manifold to nozzle, cyl, nos. 1 3 2

30 1 LW-12098-1-200 TUBE ASSY., Fuel manifold to nozzle, cyl. no. 2 1

31 LW-12098-1-170 TUBE ASSY., Fuel manifold to nozzle, cyl, no. 4 1

32 LW-16266-25-13 CLAMP, Cushion type 1




36 ISTD-860 SCREW, 10-32 x 5/8 long, fill, head 5

37 STD-670 NUT, 10-32 self-locking 5

38 LW-16266-25-63 CLAMP, Cushion type (nozzle vent line)39 LW-14714 CONNECTOR, Push-Pull cable

40 AN345C10 NUT, 10-32 1

41 ILW-13429 ROD END, Female, 10-32 1

42 ISTD-63 NUT, 10-32 plain 1

43 AN3-7 BOLT, 10-32 x 29/32 long, hex. head 1

44 ISTD-122 WASHER, #10 plain AR

45 ISTD-3O3 NUT, 10-32 slotted 1

46 STD-68 PIN, Cotter, 1/16 dia, x 1/2 long 1

6-5

Avco Lycoming L TIO-360-C1A6D PARTS CATALOG

Williamsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGII\IE

\I II32 33-.-i"i ~is"l

Il!fii)377

""~sr36it!

~ap35

12-/

29,30,3138--/

j

I =i2 /-21

19

28--’

23

’7nBij 3~ 1 ii

17

j?1 J,

9 /-13r-r~ o

P ~J.1

431

442 451~ i~i3

~40Co~ 39

4~9/

o

’e~n

15

16

Figure 25. FUEL INJECTOR, FUEL MANIFOLDS AND INJECTION NOZZLES

6-6

Avco Lycoming LiS~Ci;l.l:l TIO-360-C11\60 PARTS CATALOG

Williamspart Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE


NOZZLE VENT MANIFOLDS AND ATTACHMENTS

FIG. QUANTITY

REF. PART PER


1 LW-18961 MANIFOLD, Right, injector nozzle vent 1

2 LW-18962 MANIFOLD, Left, injector nozzle vent 1

3 STD-1339 PLUG, 1/16-27 NPT 2

4 LW-18545 HOSE, 3/16 1.D. x 7/16 O.D, x 2-7/8 long 4

5 LW-15592-5-04 CLAMP, 7/16 O.D. hose 8

6 MS51505B4S ELBOW, 1/4 tube (900) on vent tube end 2

7 LW-12784-4-160 HOSE ASSY., Right nozzle vent to housing tee 1

8 LW-12784-4-274 HOSE ASSY., Left nozzle vent to housing tee

9 76734 ZIP STRAP 2

10 LW-16266-10-38 CLAMP, Right nozzle vent line 1

11 IMS21333-99 CLAMP, Left nozzle vent line 1

12 1 STD-1930 HOSE, Left nozzle vent line 1

6-7

Avco Lycoming Li TIO-360-C1A6D PARTS CATALaC


Q8

61 --10

I~ r~

Figure 26. NOZZLE VENT MANIFOLDS AND ATTACHMENTS

6-8

Avco Lycoming TID-360-C1A60 PARTS CATALOG


TURBDCHARGER AND EXHAUST SYSTEM

EXHAUST MANIFOLDS AND TRANSITION ASSEMBLY

FIO. QUANTITYREF. PART PER


1 LW-13938 GASKET, Exhaust flange 8

2 LW-15691 MANIFOLD ASSY., Exhaust, right 1

3 LW-14001 PIPE, Exhaust, cylinder no. 1 1


5 LW-1 5690 PIPE, Exhaust, intermediate 1

6 LW-11400 ADAPTER, Exhaust pipe 1

7 LW-16222 CLAMP, Exhaust pipe 1

8 LW-18O95 STRAP, Exhaust pipe 1


10 ILW-25-0.50 BOLT, 1/4-20 x 1/2 long, hex. hd. 1

11 LW-25-O.63 BOLT, 1/4-20 x 5/8 long, hex. hd. 1

12 STD-2044 NUT, 1/4-20 UNF, self-locking 1

13 LW-13998 MANIFOLD ASSY., Exhaust, left 1



16 LW-11400 ADAPTER, Exhaust pipe 1


18 LW-19347 PIPE, Exhaust, tail 1

19 LW-I 3997 SHIELD, Heat 1

20 LW-I 5592-8-24 CLAMP, Hose 2

21 LW-14485 GASKET, Turbocharger inlet 2

22 LW-13464 CLAMP, 3-11/16 diameter, "V" Band 2

23 LW-15765 ROD END, 10-32 (stainless steel) 1

24 AN960C-10L WASHER, #10 (stainless steel) 3

25 AN3C-7 BOLT, 10-32 (stainless steel) 1

26 AN32O-C3 NUT, 10-32 (stainless steel) 1

27 ISTD-68 PIN, Cotter, 1/16x1/21ong 1

28 LW-18947 SHIELD, Heat, exhaust pipe 1

29 LW-15592-8-36 CLAMP 1

30 1 LW-16863 TRANSITION AND WASTEGATE ASSEMBLY 1

31 LW-1 3671 SPRING, Wastegate 1

32 AN501-1O-12 SCREW, 10-32 x 3/4 long, fill. head 1

33 ISTD-63 NUT, 10-32 plain 1

34 LW-13991 SUPPORT, Linkage control 1

35 LW-16759 SPACER, Support, linkage control 2

36 ISTD-160 WASHER, 1/4 internal lock 2

37 LW-25-1.13 SCREW, 1/4-20 x 1-1/8 long, hex. head 2

38 STD-1411 NUT, 1/4-20 n 2

7-1

Avco Lycoming Li ~:C i;-T~:l TIO-360-O1A6D PARTS CATALOG


14715\ P

11,97~1210

"~U/iti;/ ~yc""

*I

19

20,----27

26b~

"W´• 34-

29o 35\22 "’7

Figure 27. EXHAUST MANIFOLDS AND TRANSITION ASSEMBLY

7-2

Avco Lycoming TIO-360-C11\50 FIATS CIITALOG


TURBOCHARGER AND EXHAUST SYSTEM

TURBOCHARGER, SUPPORT AND ATTACHING PARTS



1 LW-13965 TURBOCHARGER (600578-05) 1

2 LW-16757 BRACKET, Turbo 1

3 LW-14017 BAFFLE, Turbo 1

4 LW-15592-8-28 CLAMP, Hose 1

5 LW-16760 SPOOL, Turbo (bracket to turbo attaching) 2

6 LW-31-2.50 BOLT, 5/16-18 x 2-1/2 long (bracket to turbo attaching) 2

7 STD-2043 NUT, 5/16-18 self-lock (bracket to turbo attaching) 2

8 LW-18605 MOUNT ASSY., Turbo compressor inlet 1

9 LW-15692 BUSHING, Turbochargermount 4

10 LW-13476 GASKET, Turbocharger compressor inlet 2

11 STD-28 WASHER, #10 plain 6

12 STD-82 SCREW, 10-24 x1/2 long, fill, head drive 6

13 LW-13957 STRUT, Turbocharger, lower front 1

14 1 LW´•18607 STRUT ASSY., Turbocharger, upper rear 1

15 LW-18603 SUPPORT, Bushing, turbo strut 1

16 ISTD-596 NUT, 3/8-24 plain 2

17 1 LW-15555 SPACER, Turbo strut 1

18 STD-160 WASHER, 1/4 internal lock (lower rear strut to mount) 2

19 llW-25-1.50 BOLT, 1/4-20 x1I1/2 lg., hex. hd. (lower rear strut to mount) 1

20 1 STD-1411 NUT, 1/4-20 plain (lower rear strut to mount) 2

21 LW-25-1.75 BOLT, 1/4-20 x 1-3/4 long (upper rear strut to mount) 1

22 STD-2201 WASHER, 1/4 plain (upper rear strut to mount) 2

23 ISTD-35 WASHER, 5/16 plain (turbo bracket to crankcase) 1

24 1 STD-1420 NUT, 5/16-18 slotted (turbo bracket to crankcase) 1

25 LW-31S-1.25 BOLT, 5/16-18 x 1-1/4 long, hex. hd. dr. shank 1

26 ISTD-475 WASHER, 5/16 internal lock (strut LW-13957 to ace, hsg.) 1

27 LW-31-1.31 BOLT, 5/16-18 x 1-5/16 lg., hex. hd. (strut LW-13957 to ace. hsg.) 1

28 iAN381-2-10 PIN, Cotter, 1/16 dia, x 5/8 long 1

29 ISTD-8 WASHER, 1/4 plain (turbo bracket to sump flange) 1

30 ISTD-160 WASHER,1M internal lock (turbo bracket to sump flange) 1

31 ISTD-1411 NUT, 1/4-20 plain (turbo bracket to sump flange) 1

32 1 STD-1948 BOLT, 1/4-20 x 2-11/16 lg., hex. hd. (turbo bracket to sump flange) 1

7-3

Avco Lycoming Lir):Ci~:l TIO-360-C1A6D PARTS CATALOG


4-\3

Ti

Y

~i ´•28

d i

2~-18

I~‘:y16-

15

--7

~1)21i 22-’

2913 0-

27- ~9 W 20261 -18

199-o

?t12-II~ 2 -7

-6

Figure 28. TURBOCHARGER, SUPPORT AND ATTACHING PARTS

7-4

Avco Lycoming C i~:C i i~:I TIO-360-C11160 PI\RTS CIITI\LOG


TURDOCHARGER AND EXHAUST SYSTEM

TURBOCHARGER HOSES, DUCT AND RELATED PARTS



1 LW-14488 DUCT, Air inlet 1

2 LW-15490 HOSE, 2-1/4 I.D. x 2-1/2 long 1

3 LW-1 5858-62-269 CLAMP, "T" bolt 2

4 77504 GASKET, Fuel injector 1

5 LW-18941 ADAPTER, Fuel injector inlet 1

6 LW-18942 BRACKET, Injector linkage 1





11 ISTD-160 WASHER, 1/4 lock, ;internal teeth 4


13 LW-15859 HOSE, 3.00 I.D. x 2-1/2 long 1

14 LW-15858-62-350 CLAMP, Hose, 3-1/2 I.D, x 9/16 wide 2

15 MS29513-138 SEAL, "O" Ring, 2-7/64 1.D. x 3/32 section 1

16 LW-14445-3 VALVE ASSY., Absolute pressure relief 1

17 ISTD-425 WASHER, #10 plain 4

18 ISTD-251 WASHER, #10 lock, internal teeth 4

19 iSTD-375 SCREW, 10-24 x 5/8 long, fill, head 3

20 AN500-10-18 SCREW, 10-24 x 1-1/8 long, fill. head

21 1 LW-12877-65-066 HOSE ASSY., Fuel pump to injector (6-3/4 long) 1

LW-12799-6S-070 HOSE ASSY., Fuel pump to injector (7.00 long) 1

22 LW-14724 BRACKET, Linkage 1

23 STD-251 WASHER, #10 internal lock (bracket to valve screw) 1

24 IAN365-1024 NUT, 10-24 self-locking (bracket to valve screw) 1

25 LW-16266-25-25 CLAMP, Cushion type (linkage to bracket) 1

26 ISTD-860 SCREW, 10-32 x 5/8 long, fill. hd. (linkage to bracket) 1

27 STD-670 NUT, 10-32 self-locking (linkage to bracket) 1

28 MS29512-4 SEAL, Oil, 5/64 dia. section x 11/32 I.D. (injector inlet adapter) 1

29 AN814-4L PLUG, 7/16-20 thread (injector inlet adapter) 1

30 72376 ELBOW,1/4 tube adj. 90" (assemble in air inlet duct) 1

7-5

Avco Lycoming 6 i ~S1C i r~l:l TIO-360-C1A60 PARTS CATALOG

Williamsport Division WIDE CYi.lNOER FIANGE CRANKGASE MODEL ENGINE

iicrIi

J~1 7~_IJr

lr~i;j/iI/’i

ii\\

i’

i~8

~I29

18

1o1820

1-12712~ 7

ah- ~25

m \-9P~j3,

Figure 29. TURBOCHARGER HOSES, DUCT AND RELATED PARTS

7-6

Avco Lycoming TIO-360-Cld6D PI\RTS CITILOG

Wllliamsport Divlrilon WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE

TURDDCHARGER AND EXHAUST SYSTEM

TURBOCHARGER HARDWARE AND RELATED PARTS



1 LW-14528 GASKET, Turbocharger oil drain 1

2 LW-16036 FLANGE, Turbocharger oil drain 1



5 LW-38-1.0O BOLT, 3/8-16 x 1.00 long, hex. head 2

6 1102* PLUG, 1/8 NPT, Alien head 1

7 02A19416 FITTING ASSEMBLY, Turbocharger 1

8 02A19417 ELBOW, 1/4 tube x 1/8 NPT, 900 1

9 02(;19418 NIPPLE, Turbocharger 1

10 LW-13478 ELBOW, 1/4 tube x 1/8 NPT, 900 (turbo oil inlet) 1

11 LW-12798-4S095 HOSE ASSY., 9-5/8 long (turbo oil inlet) 1

LW-12798-4S111 HOSE ASSY., 11-1/8 long (turbo oil inlet) 1

12 76734* ZIP STRAP 1

13 LW-18977 ELBOW, 5/8 1.D, hose x 1/2 NPT, 450 tin oil sump) 1

14 LW-16716 TUBE, Turbo oil drain 1

15 LW-14394 HOSE, Turbo oil drain 2

16 LW-1 5592-8-08 CLAMP, Hose 4


18 ISTD-969 SCREW, 10-32 x 1/2 long, fill. head drive head 1

19 STD-425 WASHER, #10 plain 1

20 STD-670 NUT. 10-32 self-locking 1

21 LW-12056 SPACER, Oil pressure fitting 1

22 IAN9O1-8A GASKET, 3/4 I.D, x 1.00 O.D. 1

23 LW-16O12 BOLT, Oil temperature pressure fitting 1

24 1 73944 ELBOW, 1/4 flared tube, 450 1

25 LW-12784-4-102 HOSE, Fuel pump vent 1

26 75948 TEE, 1/4 tubing, adjustable w/straight thd. on side 1

27 177627 ELBOW, 1/4 tube x 1/8 NPT, restricted 1

28 1102´• PLUG, 1/8 NPT, Alien head 2

Assemble in accessory housing above oil filter pad.To attach turbo oil inlet hose to top turbo strut.

Injectorinlet adapter for fuel pump vent.

Injector inlet adapter for nozzle vent.

Assemble in LW-12056 spacer.Assemble in LW-12056 spacer and LW-16012 bolt.

7-7

Avco Lycoming Ii i $:C i;T~:l TIO-360-C1A60 PARTS CATALOG


~17

CYC8’ ~20cV->S~L27 ji c

Gjj9i":

Ir

21

I\/

14

28-’~1

16--/ 16 i

2

&r ,.A idt~5 Is-/ I,

Figure 30. TURBOCHARCER HARDWARE AND RELATED PARTS

7-8

Avco Lycoming TIO-360-C11\6D PARTS CATALOG

Williamsport Division WIDE CYLINDER FLANGE CRANKCASE;MODEL ENGINE

SERVICE KIT SECTION

CYLINDER, PISTON AND RING ASSY.



STD-160 WASHER 2

STD-1215 BOLT 2

STD-1925 SCREW 8


MS13998-3 CAP, Valve, exhaust I

LW-16475 SEAT, Valve spring upper 1



LW-11775 PLUG, Pistoa pin 2


LW-i1797 SPRING, Valve inner 2



LW-14077 PIN, Piston.’´•´• 1

LW-14433 COVER ASSY., Rocker box 1

LW-14893 SEAT, Valve spring lower, intake 1

LW-14894 SEAT, Valve spring lower, exhaust 1

LW-10545-S PISTON 1

62388 CAP, Valve stem, intake 1


69532 SEAT, Valve spring upper, intake 1



71549 WASHER, Valve washer thrust 2



72710 COVER, Rocker shaft 2

73857 RING, Piston, oil reg. 1

74241 RING, Piston, comp. 2


76266 ROCKER ASSY., Valve 2

72709 SCREW 2

STD-1411 NUT 2

8-1


Wllliamsport Division WIDE CYLINOtR FLANGE CRANKCASE MODEL ENGINE

SERVICE KIT SECTION

SEAL AND GASKET SET



AN901-8A GASKET 1

MS28795-015 SEAL, "O" Ring 2



MS29513-138 SEAL, "O" Ring 1

STD-111 GASKET 1

STD-213 SEAL, Oil 1

STD-294 GASKET 2

STD-1045 GASKET 1



60096 GASKET 1





70455 GASKET 1




72059 GASKET 1



72220 GASKET, Oil level gage 1


73383 LOCKPLATE 2






LW-10332 LOCKPLATE, Crankshaft I




LW-13473 GASKET, Carburetor inlet adapter I

LW-13476 GASKET, Turbo compressor inlet 2

LW-13938 GASKET, Exhaust flange 8

LW-14063 GASKET, V-Band coupling 1


LW-14485 GASKET, Turbo inlet 2

LW-14528 GASKET, Turbo oil drain 1

LW-15628 SEAL, Solid, crankshaft oil 1

78443 SEAL, Split, crankshaft oil 1

8-2

Avco Lycoming TIO´•360-C11\60 PI\RTS CI\TIILOG


NUMERICAL INDEX


AN3-7 Bolt 6-5 LW-11775 Plug 3-1

AN3C-7 Bolt 7-1 LW-11796 Spring 3-7

AN310-7 Nut 5-5 LW-11797 Spring 3-7

AN320-C3 Nut 7-1 LW-11999 Reducer 2-7

AN345C10 Nut 6-5 LW-1 2056 Spacer 7-7

AN365-1024 Nut 7-5 LW-12098-1-146 Tube Assy. 6-5

AN381-2-10 Pin 7-3 LW-12098-1-170 Tube Assy. 6-5

AN500-10-18 Screw 7-5 LW-12098-1-200 Tube Assy. 6-5

AN501-10-12 Screw 7-1 LW-12186 Nut 3-1

AN565B1032H5 Set Screw 1-9 LW-12545 Plug 6-1

AN6-16 Bolt 5-3 LW-12589 Insert 2-1

AN6-17 Bolt 5-3 LW-1 2596 Bolt 3-1

AN6-34A Bolt 1-13 LW-12681 Gasket 4-1

AN7-12 Bolt 5-5 LW-1 2688 Seat 3-3

AN7-14 Bolt 5-5 LW-1 2784-4-102 Hose 7-7

AN8-14A Bolt 1-5 LW-12784-4-160 Hose Assy. 6-7

AN814-4L Plug 7-5 LW-12784-4-274 Hose Assy. 6-7

AN814-10L Plug 2-7 LW-12789 Tube Assy. 1-3

AN816-6 Nipple 2-5 LW-12 798-4S095 Hose Assy. 7-7

AN901-8A Gasket 7-7 LW-12798-4S111 Hose Assy. 7-7

AN960-10L Washer 7-1 LW-12799-68-070 Hose Assy. 7-5

AN960-616L Washer 1-13 LW-12876-4S-172 Hose Assy. 6-5

LW-102B4 Gear 1-5 LW-12877-6S-066 Hose Assy. 7-5

LW-10288 Gear Assy. 1-11 LW-12878-48-176 Hose Assy. 6-5LW-10296 Gear Assy. 1-11 LW-12878-48-200 Hose Assy. 6-5

LW-1 0298 Shaft 1-11 LW-13123 Baffle 3-3LW-1 0299 Shaft 1-11 LW-1 3209 Bearing 3-1LW-10305 Gear Assy. 2-6 LW-13262 Valve 3-7

LW-1.0320 Sleeve 2-7 LW-1 3353 Gasket 6-1

LW-10321 Spring 2-7 LW-13422 Rod Assy. 3-1

LW-10323 Gear Assy. 1-11 LW-13429 Rod End 6-5

LW-10332 Lockplate 1-5 LW-1 3464 Clamp 7-1

LW-10327 Shaft Gear 1-11 LW-13476 Gasket 7-3

LW-1 0341 Insert 2-1 LW-1 3478 Elbow 7-7

LW-1 0342 Body 2-3 LW-13565 Spring 3-7

LW-1 0544 Alternator 5-1 LW-1 3618 Spacer 3-7LW-1 0545 Piston 3-1 LW-1 3619 Washer 3-7

LW-10799 Spacer 2-5 LW-1 3641 Cushion 4-1

LW-10888 Housing Assy. 2-1 LW-13643 Gear 4-1LW-1 0945 Roller 1-5 LW-13671 Spring 7-1

LW-1 0970 Strut 5-5 LW-1 3683 Bearing 1-7

LW-10971 Belt 5-1 LW-13807 Adapter Assy. 6-3LW-1 0977 Roller 1-5 LW-1 3885 Bearing 1-7

LW-10979 Alternator Assy. 5-1 LW-13896 Plug 1-9

LW-11147 Bracket 5-5 LW-1 3904 Kit 2-7LW-11166 Fuel Pump 2-5 LW-1 3923 Bushing 3-1LW-11400 Adapter 7-1 LW-1 3938 Gasket 7-1LW-11635 Shield 5-5 LW-1 3944 Pipe 6-3LW-11665 Thrust Button 3-5 LW-13945 Pipe 6-3LW-11713 Spring 1-7 LW-13957 Strut 7-3

9-1

Avco Lycoming TIO-360´•C1~6D PARTS CATALOG

Wllllamsport Dlvlslon WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE



LW-13964 Cylinder Assy. 3-3 LW-15689 Pipe 7-1

LW-1 3965 Turbocharger 7-3 LW-1 5690 Pipe 7-1

LW-13976 Tube Assy. 3-9 LW-15691 Manifold Assy. 7-1

LW-13977 Tube Assy. 3-9 LW-15692 Bushing 7-3

LW-13978 Tube Assy. 3-9 LW-15695 Baffle Assy. 3-9

LW-13991 Support 7-1 LW-15765 Rod End 7-1

LW-13997 Shield 7-1 LW-15796 Sump Assy. 6-1

LW-13998 Manifold Assy. 7-1 LW-15858-62-269 Clamp 7-5

LW-1 4001 Pipe 7-1 LW-1 5858-62-350 Clamp 7-5

LW-1 4002 Pipe 7-1 LW-1 5859 Hose 7-5

LW-1 4004 Pipe 7-1 LW-1 6012 Bolt 7-7

LW-1 4017 Baffle 7-3 LW-1 6036 Flange 7-7

LW-14018 Tube Assy. 3-7 LW-16222 Clamp 7-1

LW-1 4021 Shaft 1-9 LW-1 6266-10-13 Clamp 6-5

LW-14040 Gear Assy. 2-3 LW-16266-10-25 Clamp 6-5

LW-1 4045 Guide 3-3 LW-1 6266-10-38 Clamp 6-5

LW-1 4077 Pin 3-1 LW-1 6266-10-38 Clamp 6-7

LW-14141 Bracket 5-5 LW-1 6266-10-88 Clamp 7-7

LW-1 41 42 Bracket 5-5 LW-1 6266-2 5-1 3 Clamp 6-5

LW-1 4260 Seal 2-3 LW-1 6266-2 5-2 5 Clamp 7-5

LW-14326 Alternator 5-1 LW-1 6266-2 5-50 Clamp 4-1

LW-1 4394 Hose 7-7 LW-1 6266-2 5-63 Clamp 6-5

LW-14433 Cover Assy. 3-5 LW-16286 Filter Assy. 2-7

LW-14445-3 Valve Assy. 7-5 LW-16475 Seat 3-7

LW-1 4485 Gasket 7-1 LW-16716 Tube 7-7

LW-1 4488 Duct 7-5 LW-16757 Bracket 7-3

LW-1 4528 Gasket 7-7 LW-16759 Spacer 7-1

LW-14529 Plug 1-5 LW-1 6760 Spool 7-3

LW-14637 Shim 5-5 LW-16863 Trans. Waste. Assy. 7-1

LW-1~4649 Shim 5-5 LW-17326 Crankshaft Assy. 1-5

LW-14650 Shim 5-5 LW-17338 Crankshaft Assy. 1-5

LW-146668 Crankcase Assy. 1-1 LW-18085 Spring 1-7

LW-1 4714 Connector 6-6 LW-1 8095 Strap 7-1

LW-1 47 24 Bracket 7-5 LW-18109 impeller 2-3

LW-14748 Gage Assy. 1-3 LW-18110 Impeller Assy. 2-3

LW-1 48 20 Ring 1-5 LW-1 8497 Valve 3-7

LW-14833 Baffle Assy. 3-9 LW-18545 Hose 6-7

LW-1 4893 Seat 3-7 LW-1 8603 Support 7-3

LW-14894 Seat 3-7 LW-18605 Mount Assy. 7-3

LW-15490 Hose 7-5 LW-18607 Strut Assy. 7-3

LW-15555 Spacer 7-3 LW-18667 Pin 1-5

LW-1 5572 Starter 5-2 LW-18753 Guide 3-3

LW-15592-5-04 Clamp 6-7 LW-18847 Camshaft Assy. 1-5

LW-15592-5-05 Clamp 3-9 LW-18854 Nozzle Assy. 6-5

LW-15592-8-08 Clamp 7-7 LW-18939 Adapter Assy. 6-5

LW-1 5592-8-24 Clamp 7-1 LW-1 8941 Adapter 7-5

LW-1 5592-8-28 Clamp 6-3 LW-1 8942 Bracket 7-5

LW-1 5592-8-28 Clamp 7-3 LW-1 8943 Fuel Injector 6-5

LW-15592-8-36 Clamp 7-1 LW-1 8947 Shield 7-1

LW-1 5628 Seal 1-7 LW-1 8961 Manifold 6-7

9-2

Avco Lycoming TIO-360-C166D PARTS CATALDG

Wllliamsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE



LW-1 8962 Manifold 6-7 MS20823-6 Elbow 2-5

LW-18963 Manifold Assy. 6-5 MS21333-99 Clamp 6-7

LW-18964 Manifold Assy. 6-5 MS29512-4 Seal 7-5

LW-18977 Elbow 7-7 MS29512-10 Seal 2-7

LW-1 9026 Adapter 6-5 MS29513-138 Seal 7-5

LW-19238 Shaft 5-5 MS51 505848 Elbow 6-7

LW-19265 Pulley Shaft Assy. 5-5 MS124703 Insert 2-1

LW-19298 Ring 3´•3 STD-8 Washer 1-13

LW-19299 Ring 3-3 STD-8 Washer 2-3

LW-1 9347 Pipe 7-1 STD-8 Washer 2-6

LW-25-0.50 Bolt 7-1 STD-8 Washer 3-3


LW-2 5-0.81 Bolt 2-3 STD-8 Washer 6-1




LW-25-1.00 Bolt 6-1 STD-19 Dowel 1-9


LW-25-1.13 Screw 7-1 STD-33 Washer 1-13






LW-25S1.50 Bolt 1-13 STD-35 Washer 2-5





LW-31 8-1.25 Bolt 7-3 STD-63 Nut 6-5

LW-31-1.31 Bolt 7-3 STD-63 Nut 7-1

LW-31-2.50 Bolt 7-3 STD-68 Pin 6-5

LW-31H.75 Bolt 5-3 STD-68 Pin 7-1

LW-31H.75 Bolt 5-5 STD-82 Screw 7-3

LW-31H1.22 Bolt 5-5 STD-111 Gasket 6-1

LW-31H1.75 Bolt 2-3 STD-122 Washer 6-5

LW-38-0.59 Bolt 7-5 STD-1 48 Nipple 6-5

LW-38-1.00 Bolt 7-7 STD-1 60 Washer 1-13

LW-382698 Kit 4-1 STD-1 60 Washer 2-3

LW-620028-2 Clip 4-1 STD-1 60 Washer 2-6

LW-682555-13 Magneto 4-1 STD-1 60 Washer 3-5

LW-684407-303 Harness 4-1 STD-1 60 Washer 6-1

LW-6 8 5 1 24-1 1 8 Magneto 4-1 STD-1 60 Washer 6-3

MS1 3997-3 Key 3-7 STD-1 60 Washer 7-1

MS13998-3 Cap 3-7 STD-1 60 Washer 7-3

MSlgg25-1081 Ring 1-5 STD-1 60 Washer 7-5

r\nsi 6625-1 100 Ring 2-7 STD-213 Seal 1-11

MS1 662 5-1 1 2 5 Ring 5-5 STD-251 Washer 7-5

MS20822 Elbow 6-5 STD-294 Gasket 2-7

MS20822-6 Elbow 2-5 STD-303 Nut 6-6

9-3

Avco Lycoming TIO-360-C11160 PARTS CATALOG

Williamsport Dlvlslon WIDE CYLINDER FLANGE CRANKGASE MODEL EI\IGINE



STD-375 Screw 7-5 STD-1411 Nut 7-1


STD-425 Washer 7-7 STD-1 420 Nut 7-3

STD-475 Washer 1-9 STD-1623 Insert 1-1



STD-475 Washer 4-1 STD-1774 Pin 1-11

STD-475 Washer 5-2 STD-1838 Bolt 1-13



STD-514 Dowel 1-1 STD-1874 Screw 4-1

STD-551 Plug 6-1 STD-1925 Screw 3-3

STD-557 Dowel 1-1 STD-1925 Screw 3-5

STD-596 Nut 1-13 STD-1 930 Hose 6-7

STD-596 Nut 7-3 STD-1 948 Bolt 7-3



STD-670 Nut 6-5 STD-2078 Dowel 1-5

STD-670 Nut 7-5 STD-2090 Nut 3-5

STD-670 Nut 7-7 STD-2166 Elbow 6-5

STD-678 Washer 1-13 STD-21 80 Hose 3-9


STD-678 Washer 7-7 STD-2217 Seal 2-6

STD-684 Nipple 3-9 STD-2221 Nut 5-5

STD-690 Washer 5-3 25C-8 Stud 3-3

STD-713 Pin 5-3 25C-10 Stud 3-3

STD-761 Pin 5-5 25(=-12 Stud 2-1

STD-798 Dowel 1-9 31C-12 Stud 1-1

STD-860 Screw 6-5 31C-13 Stud 1-1

STD-860 Screw 7-5 31C-13 Stud 2-1

STD-872 Nut 1-13 31C-14 Stud 6-1

STD-872 Nut 5-3 31C-16 Stud 1-1

STD-969 Screw 7-7 31C-19 Stud 2-1

STD-1 045 Gasket 1-7 38-13 Stud 1-1

STD-1164 Insert 6-5 38-22 Stud 1-1

STD-1223 Nipple 3-9 38[)-17 Stud 1-1

STD-1339 Plug 1-1 50-15 Stud 1-1

STD-1339 Plug 2-1 383-8 Nut 3-5

STD-1 339 Plug 6-7 10288 Ball 1-7

STD-1353 Insert 3-3 1102 Plug 1-1

STD-1 409 Nut 1-13 1102 Plug 1-5

STD-1410 Nut 1-9 1102 Plug 3-3

STD-1410 Nut 2-5 1102 Plug 6-1

STD-1410 Nut 4-1 1102 Plug 6-5

STD-1410 Nut 5-2 1102 Plug 7-7

STD-1410 Nut 6-5 1182-U5 Spark Plug 4-1

STD-1411 Nut 1-13 1540 Plug 2-7

STD-’l411 Nut 2-6 8313 Gasket 2-6

STD-1411 Nut 3-5 60430 Cover 2-6

STD-1411 Nut 6-1 60803 Strap 1-13

9-4

Avco Lycoming TIO-360-C11\60 PI\ATS CI\TI\LOG

Willlamsport Division WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINE



61084 Spring 1-7 73061 Body 1-7

61166 Thrust Button 1-11 73249 Washer 1-9



61408 Stud 6-1 73252 Washer 1-9

62388 Cap 3-7 73383 Lockplate 5-3

65007 Retainer 1-1 73383 Lockplate 5-5

66224 Gasket 6-5 73462 Rod Assy. 3-5

66670 Bushing 3-3 73463 Rod Assy. 3-5

66732 Gasket 3-5 73464 Rod Assy. 3-5

68668 Spring 1-7 73772 Nozzle Assy. 1-1

69159 Adapter Assy. 1-11 73810 Bushing 1-5

69164 Gasket 1-11 73818 Gasket 2-1

69260 Insert 3-3 73857 Ring 3-1

69532 Seat 3-7 73944 Elbow 7-7

69602 Connection 6-1 74200 Elbow 6-5

69603 Hose 6-3 74241 Ring 3-1

69796 Dowel 1-1 74323 Strut 5-3

70310 Seal 3-7 74369 Tee 6-5

70455 Gasket 1-9 74494 Plate 3-5

70484 Screen 6-1 74711 Plug 1-5

71481 Ring 3-5 74887 Spacer 3-5

71549 Washer 3-5 74977 Support Assy. 1-5

71596 Washer 2-6 75154 Stud 1-1

71610 Hook 3-9 75233 Seal 3-5

71611 Retainer 3-9 75380 Link 5-3

71894 Seat 3-3 75656 Bushing 1-5


71907 Washer 1-5 75767 Tube 1-3

71-973 Gasket 6-3 75888 Stud 2-1

72026 Belt 5-1 75944 Valve Assy. 2-7

72050 Key 3-7 75948 Tee 7-7

72053 Gasket 1-9 76036 Gasket 3-5

72059 Gasket 1-3 76118 Spacer 1-5

72075 Seal 1-7 76119 Shield 2-1

72091 Ring 1-7 76121 Shaft Assy. 1-5

72155 Bushing 1-5 76220 Stud 1-13


72220 Gasket 1-3 76266 Rocker Assy. 3-5

72312 Ring 1-3 76420 Pulley 5-5

72376 Elbow 7-5 76421 Pulley 5-1

72377 Elbow 2-7 76510 Gasket 2-7

72378 Cover 1-9 76534 Shim 5-3

72413 Fitting 2-7 76539 Seat 2-7

72566 Gear 1-5 76734 Zip Strap 4-1

72626 Shaft 3-5 76734 Zip Strap 6-7

76706 Insert 3-3 76734 Zip Strap 7-7

72709 Screw 3-5 76768 Lockwasher 5-5

72710 Cover 3-5 76769 Locknut 5-5

72801 Counterweight Assy. 1-5 77154 Gasket 6-5

9-5

Avco Lycoming TIO-360-C11\6D P~RTS GATALOG

Williamsport Division WIDE CYL NntR FLANGE CRANKCASE MODEL ENGINE

NUWIERICAL INDEX (Cont.)


77467 Spring 1-7 78290 Plunger Assy. 3-7

77504 Gasket 7-5 78524 Socket 3-7

77527 Extension 1-3 78629 Ball Bearing 5-5

77579 Support Assy. 1-5 02A19416 Fitting Assy. 7-7

77627 Elbow 7-7 02A19417 Elbow 7-7

77808 Valve Assy. 1-7 02A19460 Nipple 2-7

77872 Bushing 1-9 02G19418 Nipple 7-7

77874 Gear Assy. 1-9 07A19474 Bracket 5-3

77875 Gear 1-3 32819553 Alternator Assy. 5-1

77915 Elbow 6-5 36819484 Pulley 5-1

78067 Elbow 2-5 661\/119385 Clamp 4-1

9-6

Lycoming.360 IPC

Documents

Transcript of Lycoming.360 IPC