LUBRICANTS - s-oil7.com
Transcript of LUBRICANTS - s-oil7.com
![Page 1: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/1.jpg)
LUBRICANTSPRODUCT GUIDE
![Page 3: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/3.jpg)
3
INDUSTRIAL & MARINELUBRICANTS
![Page 4: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/4.jpg)
4
The Most Profitable and Integrated Energy Company
S-OIL was established in 1976 and cultivated management characteristics with a mobility to match the international generation, and a management strategy for its profit-base to grow as a competitive oil-refining company.
669k B/D
Crude Oil Refinery Capability
World’s 5th
1,800k tPX Production Capability
World’s 2nd
43k B/D
Lube Base Oil Production
Capability World’s 2nd
![Page 5: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/5.jpg)
5
The company has facilities that produce lube base oil, petro-chemical products, and crude oil refining facilities of 669,000 barrels a day in the Onsan Industrial Complex of Ulsan. Based on the Xylene Center, which is the world’s largest PX production facility, and the Bunker-C Cracking Center of worldwide standard, the company is establishing itself as a company that leads in environment protection and consumer protection by producing and supplying high quality petroleum products.
S-OIL has successfully operated the world’s largest Bunker-C Cracking Center since the middle of 1990s, which was 10 years ahead of other competing companies. Competition and profitability were innovatively increased through the Bunker-C Cracking Center (BCC). Furthermore, the company seeks marketing and production strategies connected to local and foreign market while maximizing efficiency.
While maintaining competition obtained from investment, the company promoted an expansion project of the Onsan Factory including 2nd Aromatic Complex to increase profit, and started commercial operation from April 2011. After 3 years of planning, design, and construction, the project was successfully completed, and the company started to possess the groundwork to take a leap as an excellent company with the best competition in the petro-chemistry area in the provision of products from Korea and Overseas.
![Page 6: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/6.jpg)
6
The first asia pacific refiner listedin DJSI World for 7 consecutive yearsIn 2016, S-OIL was selected as DJSI World company for 7 consecutive years. It is the first case among oil refinery in the Asia-Pacific Area. At the same time, S-OIL is the only company selected to DJSI World from all domestic oil refinery and petrochemical companies.
S-OIL settled as lube base oil makerwith international competition leading in the locar marketEver since its foundation in 1976 as the first lube oriented oil refinery in South Korea, S-OIL Corporation has been a leading manufacturer of lube base oils in the South Korean market. The first facility utilized Gulf ’s hydrotreating process, the most advanced at the time, combined with Texaco’s MEK dewaxing process and afterwards with ExxonMobil’s MLDW™ (Mobil Lube Dewaxing) process and had the daily production capacity of 8,000 barrels.
![Page 7: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/7.jpg)
7
As recently as Dec. 2002, S-OIL has begun commercial production of very high VI lube base oils with the completion of all-hydroprocessing plants(hydrocracking, wax hydroisomerization and hydrofinishing) through expansion and upgrade to existing hydrocracking complex. As a result, S-OIL now has full line-up of Group III and Group II base oil products with daily production capacity of 42,700 barrels and possesses strong international competitiveness in base oil business both in production capacity and product quality.
S-OIL LUBRICANTS is responding to various market demandsby repeating continuous change and developmentS-OIL has been firm in its position as the leading company in the lubricant market after reforming development and continuous change since entering the lubricant business in 1989.
S-OIL diversified its lubricant portfolio according to the demands of the market, and S-OIL possesses both lubricant brands, a high quality lubricants brands S-OIL 7 and a economic feasible brands S-OIL dragon.
![Page 8: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/8.jpg)
8
“S-OIL 7” is based on Group II and III base oil directly produced at S-OIL and PAO as a high quality lubricant brand.
S-OIL 7 maximized 5 main characteristics (Mileage increase, environment-friendliness, operation drivability,
engine durability, and internal cleanness).
Through this, this brand embodied the ‘7’ elements of high quality lubricant by combining 2 customer values
- ‘Ascend (increase)’, symbolizing satisfaction of the driving experience of consumers, and ‘Forward (advance)’,
meaning the development of driving function of automobile.
Reboot your enginewith Fully synthetic & Synthetic lubricants Feel S-OIL 7!
![Page 9: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/9.jpg)
9
S-OIL 7PRODUCTS LINE
PCMO
HDDO
MCO
Transmission
- PAO - PAO A3/B4 - PAO 5W30
- GOLD - GOLD FE - RED1
- RV - RV3 - LPG
- BLACK LS - BLUE1 CJ - BLUE CI
- 4T RIDER - 4T SCOOTER
- ATF VI - ATF MULTI - ATF DEXRON® VI
- CVTF - DCTF
![Page 10: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/10.jpg)
10
S-OIL 7 is the brand name of a 100% synthetic lubricant based on the S-OIL-made VHVI (Very High
Viscosity Index, Group III) class base oil and PAO (Poly Alpha Olefin) that maximizes five main features
required for a cutting-edge engine. This brand embodies the meanings of ‘Forward’ for improving the
car’s technical performance and ‘Ascend’ for enhancing the driver’s experience.
![Page 11: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/11.jpg)
11
Product Use • Allvehicleswithgasoline,automotivedieselandLPGengines.
• VehicleswithDOHC,Turbocharger,DirectInjectionSystems,
Catalytic converters
• Dieselvehiclesfittedwithafter-treatmentdevicesincludingEGR,DPF
Product Performance
• PAObaseoilprovidesexcellentlowtemperaturefluidity,oxidationstability
and thermal stability
• ThislowSAPS(SulfatedAsh,phosphorus,sulfur)engineoilprovideslonglife
for exhaust after treatment devices including diesel particulate filter
• Resistanceofbreakdowninhotoperationconditionensurescompleteengine
protection in harsh condition
• Superiorfluiditypropertyinextremecoldconditionandprovideseasystart
• S-OIL7PAO’sexcellentcleanuppropertiesandstabilityhelptoreduce
and remove dirt and sludge buildup
Performance Level
• ACEA C3 • API SN/CF
• MB 229.51/229.31 • BMW Long Life-04
• VW 502.00/505.00
Typical Properties
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
0W40 79.7 14.0 182 <-42.5 246
PAO 100% PAO Engine Oil For Passenger Cars Equipped With Gasoline, Diesel And LPG Engines
![Page 12: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/12.jpg)
12
Product Use • Allvehicleswithgasoline,automotivedieselandLPGengines.
• Particularlyvehiclesdrivinginmodernstar-stoptrafficconditions
• VehicleswithDOHC,Turbocharger,DirectInjectionSystems,
Catalytic converters
Product Performance
• PAObaseoilprovidesexcellentlowtemperaturefluidity,oxidationstability
and thermal stability
• Rapidoilflowincoldconditionassureseasystartandgooddrivability
• Highviscosityindexensuresadequateoilfilmstrength
at hot operating condition
• Excellentdetergentsytstemremovesdirtanddepositsinengine
and assures long oil and engine life
• Resistanceofbreakdowninhotoperationconditionensurescomplete
protection in harsh condition
Performance Level
• ACEA A3/B4 • API SN
• MB 229.3 • BMW Long Life-01
• VW 501.01/502.00 / 505.00 • GM-LL-B-025
* The above representative properties are subject to a little deviations.
0W40 77.6 13.7 182 <-40.0 -
Typical Properties
Synthetic PAO Engine Oil For Passenger Cars Equipped With Gasoline, Diesel And LPG Engines
PAO A3/B4
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 13: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/13.jpg)
13
Product Use • Allvehicleswithgasoline,automotivedieselandLPGengines.
• VehicleswithDOHC,Turbocharger,DirectInjectionSystems,Catalyticconverters
• Dieselvehiclesfittedwithafter-treatmentdevicesincludingEGR,DPF
(Diesel Particulate Filter)
Product Performance
• PAObaseoilprovidesexcellentlowtemperaturefluidity,oxidationstability
and thermal stability
• ThislowSAPs(SulfatedAsh,Phosphorus,Sulfur)engineoilprovideslonglife
for exhaust after treatment devices including DPF.
• Resistanceofbreakdowninhotoperationconditionensurescompleteprotection
in harsh condition
• Superiorfluiditypropertyinextremecoldconditionandprovideseasystart
• S-OIL7PAO’sexcellentcleanuppropertiesandstabilityhelptoreduce
and remove dirt and sludge buildup
Performance Level
• ACEA C3 • API SN/CF
• MB 229.51/229.31 • BMW Long Life-04
• VW 502.00/505.00
Typical Properties
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
5W30 70.8 12.1 169 -39 236
PAO 5W30 100% Synthetic PAO Engine Oil For Passenger Cars Equipped With Gasoline, Diesel And LPG Engines
![Page 14: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/14.jpg)
14
Product Use • Passengercarswithgasolineanddieselengine
• VehicleswithDOHC,Turbocharger,CRDI,Catalyticconverters
• Dieselvehiclesequippedwithafter-treatmentdevicesincludingEGR,DPF
Product Performance
• ThislowSAPs(SulfatedAsh,phosphorus,sulfur)engineoilprovideslonglife
for exhaust after treatment devices including diesel particulate filter
• Rapidoilflowincoldconditionassureseasystartandgooddrivability
• Highviscosityindexensuresadequateoilfilmstrengthathotoperatingcondition
• S-OIL7GOLD’sexcellentcleanuppropertieshelptoremovedirtandsludge
from building up
• Improvedfuelefficiencybyminimizationoffriction
Performance Level
• ACEA C3 • API SN/CF
• MB 229.51/229.31 • BMW Long Life-04
• VW 502.00/505.00
100% Synthetic Engine Oil For Passenger Cars Equipped With Gasoline, Diesel And LPG Engines
GOLD
* The above representative properties are subject to a little deviations.
5W30
5W40
71.5
84.9
12.3
13.9
170
169
-37.5
-42
228
224
Typical Properties SAE
viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 15: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/15.jpg)
15
Product Use • PassengercarswithgasolineanddieselengniewhereACEAA5/B5,A1/B1,APISN
technical level is required
• SuitedtovehicleswithDOHC,Turbocharger,Directinjectionsystem,
Catalytic converters
Product Performance
• Improvedfuelefficiencybyminimizationoffriction
• Rapidoilflowincoldconditionassureseasystart,gooddrivabilityandreduction
of fuel consumption during start of your engine
• Highviscosityindexensuresadequateoilfilmstrengthathotoperatingcondition
• Excellentoxidationandthermalstabilityprovidesreducedsludgeformation
and ensures long oil life
• Excellentprotectionperformancewithoptimizedadditivetechnology
Performance Level
• ACEA A5/B5, A1/B1 • API SL/CF
• Ford 913C/D • RN0700
Typical Properties
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
5W30 58.2 10 159 < -40.0 -
GOLD FE 100% Synthetic, Fuel Economic Engine Oil For Passenger Cars Equipped With Gasoline, Diesel And LPG Engines
![Page 16: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/16.jpg)
16
Product Use • Allpassengercarsthatrunongasoline
• VehiclesequippedwithDOHC,Turbocharger,GDIaresuppestedtoapplyAPISN,
ILSAC GF-5 engine oil.
Product Performance
• Thisengineoilprovidespremiumperformancethankstoverystable
and clean base oil properties
• Highviscosityindexensuresadequateoilfilmstrengthathotoperatingcondition
• S-OILSEVENRED1isformulatedwithlatestcleaningagentsthathelp
to remove dirt and deposits actively
• Eco-friendlyengineoilwithimprovedfuleefficiencycausedbyminimization
of friction in moving parts
Performance Level
• 0W20, 0W30, 5W20, 5W30, 10W30 (API SN/ILSAC GF-5)
• 5W40, 5W50, 10W40 (API SN)
100% Synthetic Engine Oil For Passenger Cars That Run On Gasoline
RED1
230
230
234
242
226
230
246
246
* The above representative properties are subject to a little deviations.
0W20
0W30
5W20
5W30
5W40
5W50
10W30
10W40
46.1
53.3
44.0
61.8
87.4
105.8
64.7
90.4
8.6
9.9
8.0
10.4
14.1
16.7
10.2
13.6
-45
-47.5
-37.5
-35
<-40
<-40
-25
-33
Typical Properties SAE
viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
166
174
157
157
167
171
144
152
2.6
2.9
2.6
3.1
3.7
4.2
3.1
3.8
Viscosity index
Pourpoint(℃)
H.T.H.SViscosity
Flash point
(℃)
![Page 17: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/17.jpg)
17
Product Use • Passengercars,RV,lighttruck,SUVwithgasolineanddieselengine
• Particularlyvehiclesdrivinginmodernstart-stoptrafficconditions
Product Performance
• Fullsyntheticbaseoilhelpsmaintainoilsinitialconditionsthankstogoodstability
and high viscosity index
• Rapidoilflowincoldconditionassureseasystartandgooddrivablity
• Highviscosityindexensuresadequateoilfilmstrengthathotoperatingcondition
• Excellentdetergentsystemremovesdirtanddepositsinengine
and assures long oil and engine life
Performance Level
• ACEA A3/B4 • API SL
• MB 229.5/229.3 • BMW Long Life-01
• VW 501.01/502.00/505.00 • GM-LL-B-025
Typical Properties
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
5W30 71.2 12.1 165 -38 226
RV 100% Synthetic Engine Oil For Passenger Cars, RV, Light Truck, SUV
![Page 18: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/18.jpg)
18
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
5W30 74 12.4 166 -37 228
Product Use • Passengercars,RV,lighttruck,SUVwithgasolineanddieselengine
• Particularlyvehiclesdrivinginmodernstart-stoptrafficconditions
• VehicleswithDOHC,Turbocharger,CRDI,Catalyticconverters
• DieselVehiclesequippedwithafter-treatmentdevicesincludingEGR,DPF
(Diesel Particulate Filter)
Product Performance
• ThismediumSAPs(SulfatedAsh,Phosphorus,Sulfur)engineoilprovideslonglife
for exhaust after treatment devices including DPF.
• Rapidoilflowincoldconditionassureseasystartandgooddrivablity
• Highviscosityindexensuresadequateoilfilmstrengthathotoperatingcondition
• Excellentdetergentsystemremovesdirtanddepositsinengine
and assures long oil and engine life
Performance Level
• API SN • ACEA C3
100% Synthetic Engine Oil For Passenger Cars, RV, Light Truck, SUV
RV C3
Typical Properties
![Page 19: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/19.jpg)
19
Product Use • AllpassengercarsthatrunonLPGandgasoline
• Especially,suitableforvehiclesdrivinginmodernstart-stoptrafficconditions
• VehicleswithDOHC,Turbocharger,GDI
Product Performance
• Thisengineoilprovidespremiumperformancethankstoverystable
and clean base oil properties
• Highviscosityindexensuresadequateoilfilmstrengthathotoperatingcondition
• S-OILSEVENLPGisformulatedwithlatestcleaningagentsthathelptoremovedirt
and deposits actively
• Eco-friendlyengineoilwithimprovedfuelefficiencycaused
by minimization of friction in moving parts
Performance Level
• 10W30 : API SN/ILSAC GF-5 • 10W40 : API SN
LPG 100% Synthetic Engine Oil For Passenger Cars Equipped With LPG And Gasoline Engines
Typical Properties SAE
viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
10W30
10W40
64.7
90.4
10.2
13.6
144
152
-25
-33
246
246
* The above representative properties are subject to a little deviations.
![Page 20: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/20.jpg)
20
Product Use • Allturbochargedornormallyaspirateddieselenginesofvehiclesoperating
in the most severe conditions
• SuitableformostOEMsincludingBenz,Volvo,CumminsforEuroIV,VVIengines
• Lighttrucks,RVs,SUVs,Heavytrucks,Buseswithdieselengines
• ParticularlysuitedforlatestEUROVItooldergenerationenginesfitted
with after treatment devices including DPF, EGFR and SCR
Product Performance
• Fullsyntheticbaseoilenhancetheengineprotectionandengineoillifethanks
to high stability and cleanliness
• ThislowSAPS(SulfatedAsh,phosphorus,sulfur)engineoilprovideslonglife
for exhaust after treatment devices including diesel particulate filter
• Exceptionalanti-wearperformanceprovidesallpartsofenginekeepinitialcondition
and helps the operator’s maintenance cost saving
• Excellentdetergentsystemhelpskeeppistonsandotherenginepartsclean
for long engine life
• Goodthermalbreakdownresistanceensuresengineprotection
under modern engine’s severe conditions
Performance Level
• ACEA E4/E6/E7/E9 • API CJ-4
• VDS-4 • Renault RLD-2/3
• Cummins CES 20081 • MAN M3271-1/3477/3575
• MACK EO-O Premium Plus • Caterpillar ECF-3
• MB 228.31/228.51 • Deutz : DQC IV-10 LA
• MTU : Category 2.1/3.1
100% Synthetic Engine Oil For All Heavy-Duty Engines For The Newest API Standard
BLACK LS
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
10W40 102.8 15.5 160 -40 238
Typical Properties
![Page 21: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/21.jpg)
21
Product Use • Allturbochargedornormallyaspirateddieselenginesofvehiclesoperating
in the most severe conditions
• Lighttrucks,RVs,SUVs,Heavytrucks,Buseswithdieselengines
• EspeciallydieselvehicleswithEuropeanengineunderhighpressureandtemperature
• ParticularlysuitedforlatestEUROVItooldergenerationenginesfitted
with after treatment devices including DPF, EGFR and SCR
Product Performance
• Fullsyntheticbaseoilenhancetheengineprotectionandengineoillifethanks
to high stability and cleanliness
• ThislowSAPS(SulfatedAsh,phosphorus,sulfur)engineoilprovideslonglife
for exhaust after treatment devices including diesel particulate filter
• Excellentdetergentsystemhelpskeeppistonsandotherenginepartsclean
for long engine life
• Goodthermalbreakdownresistanceensuresengineprotection
under modern engine’s severe conditions
• Incoldconditions,goodfluidityprovideseasystartandpreventsweardamage
in initial stage
Performance Level
• ACEA E9/E7 • API CJ-4/SM
• MB 228.31 • Renault RLD-3
• Cummins CES 20081 • MAN M3575
• MACK EO-O PP • Caterpillar ECF-3
Typical Properties
BLUE1 CJ 100% Synthetic Engine Oil For All Heavy-Duty Engines For The Newest API Standard
* The above representative properties are subject to a little deviations.
10W40
15W40
94.9
101.7
14.3
15.0
154
154
-35
-32.5
228
240
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 22: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/22.jpg)
22
Product Use • Allturbochargedornormallyaspirateddieselenginesofvehiclesoperating
in the most severe conditions
• RV,SUV,lighttruck,heavytruck,busesfittedwithdieselengine
• Particularlysuitedforlowemissionenginesfittedwithaftertreatmentdevicees
including EGR
Product Performance
• Fullsyntheticbaseoilenhancetheengineprotectionandengineoillifethanks
to high stability and cleanliness
• Excellentdetergentsystemhelpskeeppistonsandotherenginepartsclean
for long engine life
• Goodthermalbreakdownresistanceensuresengineprotection
under modern engine’s severe conditions
• Incoldconditions,goodfluidityprovideseasystartandpreventsweardamage
in initial stage
100% Synthetic Engine Oil For All Heavy-Duty Engines
BLUE CI
Performance Level
• ACEA E7 •APICI-4/CH-4/CG-4
• MB 228.3 • Renault RLD/RLD-2
• Volvo VDS-3 • MAN M3275
• MACK EO-M Plus • Caterpillar ECF-2/ECF-1-a
• Cummins : CES 20071/20072/20076/20077/20078
Typical Properties
* The above representative properties are subject to a little deviations.
10W40
15W40
101.3
106.6
15.2
15.3
158
151
-38
-35
226
248
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 23: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/23.jpg)
23
Product Use • Alltypeofmodern4-strokemotorcycleenginesofallcubiccapacities,
for most severe condition of use
• Adaptedforgearboxeslubricationandoilimmersedclutches
• SuitableforbikeswhereAPISN(andbelow)
and JASO MA or MA2 specification are recommended
Product Performance
• Fullsyntheticbaseoilhelpsmaintainoilsinitialconditionsthankstogoodstability
and high viscosity index
• Provideslongenginelifeandlowcostsformaintenance
• Excellentengineandmajorpartslubricationandprotectioninallseverecondition
including normal daily urban or rural traffic (long trips, short commuting
and stop and go conditions)
• Highfrictionfactorprovedbyofficialfrictiontest(SAENo.2)givesgoodtransmission
performance by preveting clutch slippage
Performance Level
• API SN • JASO MA2/MA
Typical Properties
* The above representative properties are subject to a little deviations.
4T RIDER 100% Synthetic Engine Oil Designed For High Performance 4-Stroke Motorcycle
10W30
10W40
62.6
88.8
10.1
13.7
147
157
-34
-35
254
248
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 24: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/24.jpg)
24
Product Use • Recommendedforthemodern4-strokemotorcycleenginessuchas
scooters and mopeds
• Notrecommendedforuseinwetclutchapplication
• AdaptedforgearboxeslubricationandoildryclutchessuchasCVTtechnology
• SuitableforbikeswhereAPISN(andbelow)andJASOMBspecificationare
recommended
Product Performance
• Fullsyntheticbaseoilhelpsmaintainoilsinitialconditionsthanks
to good stability and high viscosity index
• Provideslongenginelifeandlowcostsformaintenance
• Excellentengineandmajorpartslubricationandprotectioninallseverecondition
including normal daily urban or rural traffic (long trips, short commuting and stop
and go conditions)
• Lowerfrictionfactorprovedbyofficialfrictiontest(SAENo.2)givesgoodtransmission
performance and fuel economy improvement
100% Synthetic Engine Oil Designed For High Performance 4-Stroke Motorcycle
4T SCOOTER
Performance Level
• API SN • JASO MB
Typical Properties
10W30
10W40
64.7
90.6
10.4
14
148
159
-34
-34
248
244
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 25: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/25.jpg)
25
Product Use • Thelatestgenerationofhighefficiency6/8-speedautomatictransmission
Product Performance
• Excellentviscositystabilityinoperation
• Exceptionalfrictionandanti-shudderperformances
• Enhancedfueleconomiesthankstolowviscosityandexcellentlowtemperature
performance
• Excellentthermalstabilityandresistancetooxidation
Performance Level
• GMDexronVI,FORDMerconLV,ChryslerMB236.12
• MercedesBenzMB236.12/14/15/41
• HYUNDAIKIASP-IV/SP-HIV/SP-IVPR
• MazdaFZ,MitsubishATFJ-3,NISSANMaticS,TOYOTAT-WS,JASO1A,HondaDW-1
• ZFLifeguardfluid6/6Plus/8
ATF VI 100% Synthetic 6/8-Speed Automatic Transmission Fluid
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
ATF VI 30.2 6.0 153 -50 215
Typical Properties
![Page 26: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/26.jpg)
26
Product Use • Widerangeof4/5/6/6+speedautomaticgearboxesinAsian,European,
American passenger vehicles
• Youshouldfollowthevehicle’sautomatictransmissionfluidchangeinterval
and performance level recommened in your owner’s manual
Product Performance
• Fullsyntheticbaseoilhelpsmaintianoilsinitialconditionsthankstogoodstability
and high viscosity index
• Exceptionalfrictionandanti-shudderperformanceswithadvancedtechnology
• Excellentviscositystabilityinoperation
• Excellentthermalstabilityandresistancetooxidation
• Verygoodwearprotection
100% Synthetic Multi-Purpose Automatic Transmisison Fluid
ATF MULTI
Performance Level
• GMDEXRONII/IID/IIE/IIG/IIIH/VI,FordMercon,AllisonC4/TES-295/TES-389,
Land Rover Texaco N402
• JaguarIdemitsuK17/Fluid8432,ChryslerATF+3/+4/SP-III,EssoLT71141,JWS3309
• SSANGYONGDSIH5M-66,HyundaiKiaSP-II/III/IV,JASOM3151A
• ToyotaTypeD-II/T/T-III/T-IV/T-WS,MitsubishiJ2/SP-II/SP-III,MazdaFZ/F-1/JWS3317/
M-III/Type T-IV/M-V
• NissanMatic-D/J/K/W/S,SubaruATF;plusATF-HP,IsuzuATFII/III,Suzuki3314/3317,
HondaATFZ-1/DW-1
• Volkswagen/AudiG052025A2/055/162(-A1/-A2)/533/990(A2)/G055025(A2)
• BMWLT71141/LA2634/ETL-7045E/8072B,MercedesBenz236.3/5/6/7/8/9/10/11/91,
Renault Matic-D2
• ZFTEML11A/11B,MAN339A,Bentley,Porsche,PSA,VolveATFs
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
ATF Multi 36.8 7.0 153 -46 232
Typical Properties
![Page 27: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/27.jpg)
27
Product Use • S-OIL7ATFDEXRON®-VIisrecommendedforall2006andbeyondGM’svehicles
with automatic transmissions.
• S-OIL7ATFDEXRON®-VIisalsofullyback-serviceableandcanbeusedwherever
DEXRON-II and/or DEXRON III are recommended.
Product Performance
• Extendeddrainintervals
• Consistentshiftperformance
• Protectagainstwear,corrosion,andtheformationofharmfuldeposits
such as lacquers and sludge
• Excellentthermalstabilityandresistancetooxidation
• Excellentviscositystabilityinoperation
• Exceptionalfrictionandanti-shudderperformances
• Enhancedfueleconomiesthankstolowviscosity
and excellent low temperature performance
Performance Level
• GM DEXRON®-VI •HYUNDAIKIASP-IV
• FORD Mercon® •MazdaATFFZ,F-1,S-1
• FORDM2C138CJ,116H • Mitsubishi Diaqueen J2,3,ATF PA
• MB 236.6,7,9 • NISSAN Matic K, S
• JASO 1A-LV •TOYOTAATFT-IV,WS
• HondaDW-1 •ZFTE-ML09,09X,11A11B
ATF DEXRON®-VI 100% Synthetic Automatic Transmission Fluid Officially Approved By GM
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
ATFDEXRON-VI 29.5 6.0 159 -45 222
Typical Properties
![Page 28: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/28.jpg)
28
Product Use • S-OILCVTFisdesignedforuseinawiderangeofCVT
• Althoughmiscibleandcompatiblewithconventionalbrandedgearoil,mixing
with other gear oils should be avoided
• Itisnotrecommendedforplanetarygearhybrid(2motorparallel)
CVT units (ie. Toyota Prius)
Product Performance
• S-OILSEVENCVTFensuresverystablefrictioncoefficients
• Goodshearstability
• Excellentanti-foam
• Anti-shudderdurability
100% Synthetic High Performance Transmisison Oil For Belt-CVT And Chain-CVT
CVTF
Performance Level
• Honda(HMMF/HCF-2),Toyota(TC/FE),Nissan(NS-1/NS-2/NS-3),
Daihatsu(Amix CVTF-DC/Amix CVTF DFE)
• Ford(CVT23/CVT30/MerconC/Wss-M2C933),
Suzuki(CVTF 3320/TC/NS-2/CVTF Green 1/CVTF Green 2)
• Mitsubishi(DiaqueenJ1/DiaqueenJ4/SP-III),Mazda(CVTF3320),MiniCooper(EZL799/ZFCVTV1)
• Subaru(ICVTF/LineartornicCVTF/CVTFII/K0425Y0710/CV-30),
Audi/VW(TL52180;G052180;G052516)
• Punch(EZL799),Hyundai(SP-CVT1),Hyundai/Kia(SP-III),Dodge/Jeep(NS-2/CVTF+4),
GM/Saturn(DEX-CVT)
• MercedesBenz(236.20)
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
CVTF 36.0 7.5 185 <-40 214
Typical Properties
![Page 29: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/29.jpg)
29
Product Use • S-OILDCTFissuitableforuseindualclutchtransmissionsequipped
with synchronization, gear set and hydraulic control.
• ItisnotrecommnededfordryclutchDCTtype.
Product Performance
• Excellentsynchronizerandclutchperformanceduetobalacedfrictionalcharacteristics.
• Excellentwearresistance
• Outstandingresistancetooxidation
• Excellentviscosity/temperatureproperties
Performance Level
• Audi/VW/Skoda/Seat(VWTL052182/052529),MB(236.21),
Volvo(1161838/1161839),
BMW(83 22 22 148 579/83 22 2 147 477/83 22 0 440 214/83 22 2 148 579),
• Ford/Getrag(M2C936A),Mitsubishi(MZ320065DiaqueenSSTF-I),
Porsche(999.917.080.00), Citroen(Peugeot/Citroen 9734.S2)
DCTF Synthetic Multi-Purpose Dual Clutch Transmission Fluid
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
DCTF 34.7 7.1 171 <-40 214
Typical Properties
![Page 30: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/30.jpg)
More purely and more strongly, We open a new future of car
lubricants with eco-frendly growth power satisfying both you and the globe.
More strong power and soft usability, Meet the S-OIL dragon !
Go ahead with ‘S-OIL dragon’ bornby an optimal blending technology!
30
![Page 31: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/31.jpg)
S-OIL dragonPRODUCTS LINE
PCMO
HDDO
CNG
MCO
Transmission
- SN - SM - SL
- SJ
- CJ-4/SL - CI-4/SL - CI-4/SL Combo Best
-CI-4TurboBest -CH-4/SJ -CF-4/SG
- CF
- CNG Best
- 2T - 4T SF - 4T SG
- 4T SM/MA
- ATF III - FX - Gear EP
-GearHD
31
![Page 32: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/32.jpg)
32
Product Use • Allgasolineengines,speciallyformostrecenttechnologyengines(multi-vavle,
turbocharged, with/without catalytic converter) supercharged or not, in cars
• Suitableforalljourneys(intown,onhighways)andparticularinsevereconditions
• Foralldrivingstyles,vigorousspeedsinallseasons
• SuitabletouseinLPG/CNG/LNGengine(10W30,10W40,15W40,20W50)
Product Performance
• MeetsAPISNandILSACGF-5requirements(0W20,0W30,5W20,5W30,10W30),
guarantee of an high and constant quality for lubricants
• Ensureseasycoldstartduetoitsextremefluidityatlowtemperature
and maintains a very resistant oil film even at extremely high operating temperature
• Protectsmechanicalpartsandfullypreservestheenginepower,
thus contributing to its youth and strength
• Lowviscositygradesprovidesreducedfrictionandthereforecreatersfuelsavings,
which decrease CO2 emissions
Performance Level
• API SN
• RC : 0W20, 0W30, 5W20, 5W30, 10W30
• ILSAC : GF-5 (0W20, 0W30, 5W20, 5W30, 10W30)
* The above representative properties are subject to a little deviations.
SN High-Performance Gasoline Engine Oil Making It Fun To Drive
Typical Properties
0W20
0W30
5W20
5W30
5W40
10W30
10W40
15W40
20W50
46.3
54.1
48.8
65.2
87.4
68.2
96.9
105
173.5
8.7
10
8.6
10.9
14.1
10.5
14.4
14.2
20.3
166
174
154
159
167
142
153
138
137
-45
-43
-33
-37.5
-43
-30
-33
-35
-25
231
218
212
228
226
218
212
216
222
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 33: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/33.jpg)
33
Product Use • Allgasolineengines,speciallyformostrecenttechnologyengines
(multi-vavle, turbocharged, with/without catalytic converter)
supercharged or not, in cars
• Suitableforalljourneys(intown,onhighways)andparticular
in severe conditions
• Foralldrivingstyles,vigorousspeedsinallseasons
Product Performance
• MeetsAPISNandILSACGF-5requirements(0W20,0W30,5W20,5W30,10W30),
guarantee of an high and constant quality for lubricants
• Ensureseasycoldstartduetoitsextremefluidityatlowtemperature
and maintains a very resistant oil film even at extremely high operating
temperature
• Protectsmechanicalpartsandfullypreservestheenginepower,
thus contributing to its youth and strength
Performance Level
• API SM
Typical Properties
Gasoline Engine Oil
SM
* The above representative properties are subject to a little deviations.
10W40 99.4 14.6 153 -37.5 234
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 34: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/34.jpg)
34
Product Use • Allgasolineengines,speciallyformostrecenttechnologyengines(multi-vavle,
turbocharged, with/without catalytic converter) supercharged or not, in cars
• Suitableforalljourneys(intown,onhighways)andparticularinsevereconditions
• Foralldrivingstyles,vigorousspeedsinallseasons
Product Performance
• MeetsAPISLandILSACGF-3requirements(5W30and10W30),
guarantee of an high and constant quality for lubricants
• Ensureseasycoldstartduetoitsextremefluidityatlowtemperature
and maintains a very resistant oil film even at extremely high operating temperature
• Protectsmechanicalpartsandfullypreservestheenginepower,thuscontributing
to its youth and strength
Performance Level
• APISL •ILSAC GF-3 (5W30)
SL Gasoline Engine Oil
Typical Properties
* The above representative properties are subject to a little deviations.
5W30
10W40
20W50
62.9
106.9
169.9
10.7
15.9
19.2
161.0
159
128
-40
-39
-28
228
222
248
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 35: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/35.jpg)
35
Product Use • Allgasolineengines,speciallyformostrecenttechnologyengines(multi-vavle,
turbocharged, with/without catalytic converter) supercharged or not, in cars
• Suitableforalljourneys(intown,onhighways)andparticularinsevereconditions
• Foralldrivingstyles,vigorousspeedsinallseasons
Product Performance
• Ensureseasycoldstartduetoitsextremefluidityatlowtemperature
and maintains a very resistant oil film even at extremely high operating temperature
• Givestheengineanexcellentwearprotection,developsperformanceandpower
• Keepstheengine’smostsensitivepartscleanthankstoitsadvanceddetergent
and dispersive additivation
Performance Level
•API SJ •ILSAC GF-2 (5W30, 10W30)
Gasoline Engine Oil
SJ
Typical Properties SAE
viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
5W30
10W30
10W40
20W50
59.2
66.3
106.9
154
10.2
10.4
15.9
17.3
161
145
159
121
-40
-40
-38
-25
222
234
222
252
* The above representative properties are subject to a little deviations.
![Page 36: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/36.jpg)
36
Product Use • Allturbochargedornormallyaspirateddieselenginesofvehiclesoperating
in the most severe conditions
• Lighttrucks,RVs,SUVs,Heavytrucks,Buseswithdieselengines
• EspeciallydieselvehicleswithEuropeanengineunderhighpressureandtemperature
• ParticularlysuitedforEUROIV,V,VItooldergenerationenginesfitted
with after treatment devices including DPF, EGR and SCR
Product Performance
• ThislowSAPS(SulfatedAsh,phosphorus,sulfur)engineoilprovideslonglife
for exhuast after treatment devices including diesel particulate filter.
• Synthetictechnologyenhancestheengineprotectionandengineoillifethanks
to high stability and cleanliness
• Excellentdetergentsystemhelpskeeppistonsandotherenginepartscleanfor
long engine life
• Goodthermalbreakdownresistanceensuresengineprotection
under modern engine’s severe conditions
• Incoldcondition,goodfluidityprovideseasystartandpreventsweardamage
in initial stage
Performance Level
• API CJ-4/SL
CJ-4/SL API CJ-4/SL High-End Synthetic Diesel Engine Oil
Typical Properties
10W40
15W40
104.4
108.2
15.4
14.8
156
142
<-40
<-40
224
232
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 37: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/37.jpg)
37
Product Use • SuitabletoallturbochargedornormallyaspiratedDieselenginesofcivilworks machines, trucks, fishing boats, locomotives, buses.• Lighttrucks,RVs,SUVs,Heavytrucks,Buseswithdieselengines• Particularlysuitedforlatestenginesfittedwithaftertreatmentdevices including EGR and SCR.
Product Performance
• Excellentdetergentsystemhelpskeeppistonsandotherenginepartsclean for long engine life.• Goodthermalbreakdownresistanceensuresengineprotection under modern engine’s severe conditions.• ThislosSAPS(SulfatedAsh,phosphorus,sulfur)engineoilcanreduce the blockage of filter for exhaust gas treatment.• Incoldconditions,Goodfluidityprovideseasystartandpreventsweardamage in initial stage.• Excellentoxidationresistance,anti-wearandanti-corrosionproperties protect your engine during operation.
Performance Level
• ACEAE7 •APICI-4/SL
• MB228.3/229.1,MAN3275,MTU2,VolvoVDS-3,MackEO-MPlus,RenaultRLD/RLD-2,
Cummins20076,77,78,CATECF-2,ECF-1-a,DeutzDQCIII-10,DetroitDDC93K215,DHD-1
API CI-4/SL High-End Synthetic Diesel Engine Oil
CI-4/SL
Typical Properties
* The above representative properties are subject to a little deviations.
10W30
10W40
15W40
20W50
82.9
106.8
114.8
158.6
12.5
15.6
15.4
19.1
147
155
140
137
-37.5
<-40
-37.5
-38
222
230
238
246
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 38: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/38.jpg)
38
Product Use • Perfectlysuitedtoturbo-chargedandmulti-valveengines.
• Particularlysuitedforlubricationoflowemissionengines.
Product Performance
• Veryhighviscosityindexandexcellentviscositystabilityinoperation.
• Technologywhichgivesthepopertiesofbothfluidoils(easycoldstarts)andviscousoils
(perfect lubrication at high temperature, low oil consumption)
• Excellentdispersancyanddetergencykeepingtheengineclean
and thus preserving its power.
• Excellentantiwearpropertiesprotectingtheengine’smostsensitiveparts.
Performance Level
• ACEA A3/B3 •API CI-4/SL
• MB 229.1
CI-4/SL COMBO BEST Perfectly Suited To Turbo-Charged And Multi-Valve Engines
Typical Properties
* The above representative properties are subject to a little deviations.
10W40 100.7 15.0 160 -35.0 230
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 39: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/39.jpg)
39
Product Use • Perfectlysuitedtoturbo-chargedandmulti-valveengines.
• Particularlysuitedforlubricationoflowemissionengines.
Product Performance
• Formulatedwithoptimizedashcontentstopreventweardamageortroublesofvalve
system
• Excellentantioxidatinoandnitrationperformanceatveryhighoperationtemperature
of Diesel engine
• Highchemicalstabilityandlongdrainintervalhelpstheenginestayingoodconditino
duyring whole period
• Goodfluidityatlowtemperature,soitsecuretheexcellentcoldstartability
and fewer oil consumption.
Performance Level
• APICI-4/SL •ACEAE7
• VolvoVDS-3 •RenaultTruckRLD-2
• MANM3275 •MB228.3/229.1(15W40)
• DeutzDQCIII-10 •CES20076,77,78
• MackEO-N/EO-MPlus •GlobalDHD-1
• CATECF-1-a/ECF-2 •MTUType2
• DetroitDieselDDC93K215
Synthetic Blended Oil Suited For All Diesel Engines
CI-4/SL TURBO BEST
Typical Properties
* The above representative properties are subject to a little deviations.
15W40 105.0 14.8 147 -35 224
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 40: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/40.jpg)
40
Product Use • Suitabletoallturbochargedornormallyaspirateddieselenginesofcivilworksmachines,
trucks, fishing boats, locomotives
• SuitableforDieselstationaryengines(energyproduction)
Product Performance
• Highviscosityindex
• Goodlevelofdetergency
• Exceptionaldetergencylevel
• Highstabilityinoperation
• Excellentantiwearandanticorrosionproperties
• Excellentantioxidant,antirustandantiformingproperties
Performance Level
• APICH-4/SJ
CH-4/SJ API CH-4/SJ High-End Diesel Engine Oil
Typical Properties
* The above representative properties are subject to a little deviations.
10W30
15W40
20W40
20W50
82.9
117.7
131.3
178.8
12.5
15.8
15
20.3
147
142
116
133
-37.5
-40
-35
-32.5
222
226
244
232
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 41: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/41.jpg)
41
Product Use • SuitabletoallturbochargedornormallyaspiratedDieselenginesofcivilworks
machines, trucks, fishing boats, locomotives
• RespondstotheAPICF-4specificationsfornewlowemissionengines
using low Sulphur fuels
Product Performance
• Multi-grade
• Veryhighviscosityindex
• Verygoodviscositystabilityinoperation
• Exceptionaldetergencylevel
• Exceptionalsootdispersancyproperties
• Highperformancelevelinsuressaferandlongerdrainsintervals
Performance Level
• APICF-4/SG
Multigrade Oil For Diesel Engines
CF-4/SG
Typical Properties
* The above representative properties are subject to a little deviations.
5W30
10W30
15W40
20W50
65.4
70.7
121.5
168.9
10.9
10.9
16
19.1
158
144
139
128
-43
-40
-34
-28
228
228
234
252
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 42: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/42.jpg)
42
Product Use • Suitabletoallturbochargedornormallyaspirateddieselengines
of civil works machines, trucks, fishing boats, locomotives
• RespondstotheAPICFspecificationsfornewlowemissionengines
using low Sulphur fuels
Product Performance
• Veryhighviscosityindex
• Verygoodviscositystabilityinoperation
• Exceptionaldetergencylevel
• Exceptionalsootdispersancyproperties
• Highperformancelevelinsuressaferandlongerdrainsintervals
Performance Level
• API CF
CF Mono Grade Oil For Diesel Engine
Typical Properties
50
70
231.7
329.4
20.3
25.4
102
100
<-16
-13
262
276
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 43: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/43.jpg)
43
Product Use • Allbuses,truckswithCNGEngines
Product Performance
• Formulatedwithoptimizedashcontentstopreventweardamageortroubles
of valve system
• Excellentantioxidationandnitrationperformanceatveryhighoperationtemperature
of CNG engine
• Highchemicalstabiltyandlongdrainintervalhelpstheenginestay
in good condition during whole period
• Goodfluidityatlowtemperature,soitsecuretheexcellentcoldstartability
and fewer oil consumption
Performance Level
• CumminsCES20074 •DetroitDieselSeries50&60
Synthetic Engine Oil Exclusively For Compressed Natural Gas(CNG)
CNG BEST
Typical Properties
* The above representative properties are subject to a little deviations.
15W40 111.2 14.4 132 -35.0 236
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 44: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/44.jpg)
44
Product Use • Alltypesoftwostrokemotorcycleenginesofallcubiccapacities:
motorcycles, scooters, mopeds
• Adaptedforgearboxeslubricationandoilimmersedclutchesforpremixing
with gasoline at the ratio recommended by the engine capacities manufacturer
Product Performance
• Combustioncontrol:thestrongandefficientdetergentadditivesensurethat
the distribution system remains clean. The engine retains its initial efficiency.
• Reductioninexhaustsmoke:thespecialsolventsandpolymers
it contains help reduce emissions
• Makesapermanentoilfilm,preventinganyriskofseizureofbinding
• Burnswithoutleavinganystickydeposits
• Avoidssparksplugfouling
• Verygoodanti-corrosion,anti-rustandanti-wearproperties
• Predilutedtoensureastableandhomogeneousmixture
Performance Level
• API TC •JASO FC
2T Multi-Purpose 2-Storke Motorcycle Engines
Typical Properties
* The above representative properties are subject to a little deviations.
20 47.6 8.1 142 -35 114.0
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 45: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/45.jpg)
45
Product Use • Alltypeofmodern4-strokemotorcycleenginesofallcubiccapacities,
for most severe condition of use
• Adaptedforgearboxeslubricationandoilimmersedclutches
Product Performance
• Veryhighviscosityindex
• Excellentviscositystabilityinoperation
• Excellentresistanceoftheoilfilmathightemperatures
• Veryhighlevelofdetergencyanddispersancy
• Excellentresistancetooxidation
• Verygoodantiwear,anticorrosion,antirustandantifoamingproperties
Performance Level
• APISF
Multi-Purpose 4-Storke Motorcycle Engines
4T SF
Typical Properties
* The above representative properties are subject to a little deviations.
10W30 67.9 10.4 140 -35 222
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 46: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/46.jpg)
46
Product Use • Alltypeofmodern4-strokemotorcycleenginesofallcubiccapacities,
for most severe condition of use
• Adaptedforgearboxeslubricationandoilimmersedclutches
Product Performance
• Veryhighviscosityindex
• Excellentviscositystabilityinoperation
• Excellentresistanceoftheoilfilmathightemperatures
• Veryhighlevelofdetergencyanddispersancy
• Excellentresistancetooxidation
• Verygoodantiwear,anticorrosion,antirustandantifoamingproperties
Performance Level
• API SM • JASO MA
4T SM/MA Multi-Purpose 4-Storke Gasoline Engine Oil
Typical Properties
10W40
20W50
95.1
159.7
14.3
17.8
156
123
-35
-30
220
236
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 47: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/47.jpg)
47
Product Use • Alltypeofmodern4-strokemotorcycleenginesofallcubiccapacities,
for most severe condition of use
• Adaptedforgearboxeslubricationandoilimmersedclutches
Product Performance
• Multi-grade
• Veryhighviscosityindex
• Verygoodviscositystabilityinoperation
• Exceptionaldetergencylevel
• Exceptionalsootdispersancyproperties
• Highperformancelevelinsuressaferandlogerdrainsintervals
Performance Level
• APISG/CF-4
Multi-Purpose 4-Storke Gasoline Engine Oil
4T SG
Typical Properties
* The above representative properties are subject to a little deviations.
15W40 111.6 14.7 136 -35 230
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 48: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/48.jpg)
48
Product Use • Automaticorsemi-automatictransmissionsandtorqueconverters
of all passenger caras, light commercial vehicles and industrial vehicles,
when the manufacturer requires an ATF(Automatic Transmission Fluid) GM DEXRON III
• Suitableforusealltransmissionsoftrucks,busesandpublicworksmachineries
whenafluidtypeALLISONC-4isrequired
• HydraulicsystemswhenafluidtypeGMDEXRONIIIisrequired
Product Performance
• Veryhighviscosityindexlinkedwithanexcellentviscositystabilityinoperation
• Verylowpourpoint
• Verygoodthermalstability
• Excellentresistancetooxidation
Performance Level
• GMDEXRONIIIH-specification(H-36191) • ALLISON C-4
ATF-III Automatic Transmission Fluid
Typical Properties
* The above representative properties are subject to a little deviations.
ATF-III 33 7.6 208 -46 183
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 49: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/49.jpg)
49
Product Use • Speciallydesignedforthelubricationofmanualgearboxesofpassengercars
• Veryhighperformanceoilwhichisdevelopedforsynchronized
or non-synchronised manual gear boxes
Product Performance
• Highviscosityindex
• Increasedextreme-pressureandantiwearpropertiesforanoptimizedlubrication
of manual gear boxes
• Excellentantifoam,anticorrosion,antirustproperties
• Excellentstabilityinservice
• Verylowlossinviscositythroughshear
• Compatiblewithmosttypesofsynchronisersforanoptimizedlubrication
of manual gear boxes
Performance Level
• APIGL-4
Fuel-Saving Manual Transmission Oil
MTF FX
Typical Properties
* The above representative properties are subject to a little deviations.
75W85W 61.7 11.9 193 -43 212
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 50: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/50.jpg)
50
Product Use • Gearboxes,axles,transferboxesfortruck,bus,constructionequipment,
and tractor etc
• AllgearsrequiringAPIGL-4levelorMIL-L-2105
Product Performance
• Highviscosityindex
• Extreme-Pressureproperties
• Excellentantiwear,antioxidant,antifoam,anticorrosive,antirustproperties
• Excellentstabilityinservice
Performance Level
• API GL-4 • US MIL-L-2105
GEAR EP Multi-Purpose Gear Oil
Typical Properties
80W
90
63.9
190.9
8.9
17.5
102
98
-35
-25
230
242
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 51: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/51.jpg)
51
Product Use • Gearboxes,axles,transferboxes
• Speciallyrecommendedforhighlyloadedhypoidgears
• AlltypesofgearswhentheMIL-L-2105DspecificationorAPIGL-5isrequired
Product Performance
• Syntheticblended(75W90)&Mineralbased(80W90,85W140)multi-gradeoil.(75W90)
• Highviscosityindexprovidingagoodlubricationandallowingeasygearchanges
at low as well as high temperatures.
• Benefitsofalowviscosityatlowtemperature.
• VeryhighExtreme-pressureproperties.
• Excellentstabilityinservice.
• Excellentwearreducingproperties,highoxidationresistanceandanti-rustproperties.
• Contributestoprotpectmechanicalpartsandimprovedrivability.
Performance Level
• APIGL-5 •USMIL-L-2105D
Synthetic Based Multigrade Gear Oil
GEAR HD
Typical Properties
* The above representative properties are subject to a little deviations.
75W90
80W90
85W140
85.3
131.6
338.4
14.4
14.2
25.5
177
106.0
98
-40
-35
-25
220
226
238
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 52: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/52.jpg)
52
S-OIL Lubricants is responding to various market demandsby repeating continuous change and development
INDUSTRIAL & MARINELUBRICANTS
![Page 53: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/53.jpg)
53
S-OIL IndustrialLubricants PRODUCTS LINE
Hydrualic Oils
Slide Way Oils
Industrial Gear Oil
Turbine Oil
Cutting Oil
Marine Oil
Grease
- HI-PUMP - HYDRO MASTER HV - HYDRO SUPER
- HYDRO FLUID AW - HYDRO FLUID
- HI-WAY
- S-OIL GEAR LUBE
- S-OIL TURBINE OIL
- S-OIL METAL CT
- S-OIL MARINE CL - S-OIL MARINE TP - S-OIL MARINE SO
- S-OIL GREASE MP/EP - S-OIL GREASE SUPER EP - S-OIL GREASE MOLY
- S-OIL GREASE HT - S-OIL GREASE LT
![Page 54: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/54.jpg)
54
HI-PUMP
Product Use • Hydraulicsystemsoperatingunderhighpressureandortemperature (earthmoving, excavator, loader, etc)• High-pressurevane,pistonorgearpumps• Sensitivehydrauliccircuitsrequiringabsolutefilterabilityofthefluid (very fine servo valve play) : plastic moudling machine• Any hydraulic systems where the risk of contamination of the enviornment and waters exist• Anyapplicationwhereananti-wear,high-performanceoilisnecessary
Product Performance
• Excellentanti-wearpropertiesensuringprotectionofmachineparts• Exceptionaloxidationandagingstability:greaterserviceoillife and lengthening of oil change intervals• Enviornmentallyfriendlyformulation• Preventsformationofdepositsinthecircuitthankstoremarkable thermal stability : cleaner circuits, less clogging of the filters• Reducedmaintenancecosts
Performance Level
• ISO11158(HV) •ASTMD6158(HV)
• DenisonHF-0,HF-1,HF-2 •SAEMS1004(HV)
• DIN51524,PARTIII(HV) •DenisonHF-0,HF-1,HF-2• Eaton Vickers I-286-S, M-2950-S • Five Cincinnati P68, P69, P70
• Cincinnati Machine P-68, P-69 and P-70 • Bosch Rexroth RE 90220
• US steel 127, 136
Anti-Wear, Ashless, High Viscosity Index Hydraulic Oil
Typical Properties
INDUSTRIAL OIL
* The above representative properties are subject to a little deviations.
15
32
46
68
100
15.6
32.7
46.2
68
98.9
4
6.4
8.2
10.9
14.5
161
151
153
150
152
-50
-45
-40
-40
-37.5
206
244
250
252
256
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 55: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/55.jpg)
55
Product Use • Mobile/exteriorhydraulicapplication:Suitableforawiderange
of hydraulic power applications under wide temperature range.
• Anyhydraulicsystemwhererickofcontaminationoftheenvironment
and water exist
• Anyapplicationwhereananti-wear,highVI,high-performanceoilisnecessary
Product Performance
• Outstandingwearprotection:Ensuringprotectionofmachineparts.
• Longfluidlife:Reducingmaintenancecosts.
• Maintainingsystemefficiency:Superiorcleanliness,excellentfilterability
• Extendedtemperaturerangecapability
Performance Level
• ISO11158(HV) • ASTMD6158(HV)
• SAEMS1004(HV) • DIN51524PARTIII(HV)
• DensionHF-0,HF-1,HF-2 • Five Cincinnati P68, P70
• Eaton Vickers I-286-S, M-2950-S • Bosch Rexroth RE 90220
• JCMASHK • US steel 126, 127
• SEB 181222 • GM LS-2
Industrial Hydraulic Fluid For Wide Temperature Range
HYDRO MASTER HV
Typical Properties
32
46
32
46
6.3
8.2
150
152
-45
-40
224
250
* The above representative properties are subject to a little deviations.
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 56: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/56.jpg)
56
INDUSTRIAL OIL
Product Use • Sensitivehydrauliccircuitsrequiringabsolutefilterabilityofthefluidsuchasplastic moulding machine.• Hydraulicsystemofvariousmachiningtoo;s• Anyapplicationwhereananti-wear,high-performanceoilisnecessary
Product Performance
• Excellentanti-wearpropertiesensuringprotetctinoofmachineparts• Greatlubricityathightemperaturethankstobasestock’shighviscosityindex• Preventsformationofdepositsinthecircuitthankstoremarkablethermalstability: cleaner circuits, lexx clogging of the filters• Lowpourpointhelpstoreducefrictionduringoperationatlowtemperature• Reducedmaintenancecosts
Performance Level
• ISO11158(HL/HM) •DensionHF-0(HybridPump)
• Eaton Vickers M-2950-S / I-286-S • Cincinnati Machine P-68 / P-69 / P-70
• DIN51524Part2 •USSteel127
• GeneralMotorsLS-02/LH-03/LH-04/LH-06
Anti-Wear Hydraulic Fluid
HYDRO SUPER
Typical Properties
* The above representative properties are subject to a little deviations.
32
46
68
32
46
68
5.9
7.6
9.4
130
133
116
-38
-35
-33
230
232
235
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 57: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/57.jpg)
57
Product Use • Industrialhydraulicsystem:suitableforawiderangeofhydraulicpowerapplications
• Marinehydraulicsystem
•Anyapplicationwhereananti-wear,high-performanceoilisnecessary
Product Performance
• Outstandingwearprotection:Ensuringprotectionofmachineparts
• Longfluidlife:Reducingmaintenancecosts
• Maintaniningsystemefficiency:Superiorcleanliness,excellentfilterability
Performance Level
• ISO11158(HM) • Eaton Vickers I-286-S, M-2950-S
• ASTMD6158(HM) • JCMASHK
• SAEMS1004(HM) • US Steel 127
• DIN51524PARTII(HM) • GM LS-2
• DensionHF-0 • Five Cincinnati P68, P70, P69
Industrial Hydraulic Fluid
HYDRO FLUID AW
Typical Properties
* The above representative properties are subject to a little deviations.
32
46
68
32
46
64
5.4
6.8
8.8
104
99
102
-40
-37.5
-35
218
228
238
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 58: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/58.jpg)
58
INDUSTRIAL OIL
Product Use • Allkindofhydraulicsystemoperatingunderhighpressureandnormaltemperature conditions, such as in machine tools, injection mold machine, presses and other industrial or equipment• Itisalsousedinmanyotherapplications,whereanuniversalanti-wearlubricantisthe first choice : low charged gears, sliding and roller bearings.
Product Performance
• Highanti-wearpropertiesinsuringlongerequipmentlife• Goodresistancetooxidationavoidingformationofsludgeatnormaloperation temperatureandensuringalongservicelifeofthefluid• Goodanti-foamabilityforequipmenttroublecontrol• Goodfilterabilityeveninthepresenceofwater• Excellentprotectionagainstrustandcorrosion• Gooddemulsibilityensuringrapidwaterseparation
Performance Level
• ISO11158HL
Rust & Oxidation Hydraulic Oil
HYDRO FLUID
Typical Properties
* The above representative properties are subject to a little deviations.
32
46
68
31.9
45.9
66.3
5.4
6.8
8.7
104
103
102
-37.5
-40
-37.5
216
228
238
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 59: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/59.jpg)
59
Product Use • Suitableforuseinmachinetoolofslides,tablesandfeedmechanisms
Product Performance
• Goodseparationbetweencoolantandslideway,maintaininitiallubrication
performance after separation
• Goodfrictionalpropertythankstohighperformancefrictionmodifierandanti-wear
additive prevents stick-slip and provides increased speed of operation and decreased
shutdowns
• Sufficientadhesivelubricationfilmspreventswearanddamageonthesurfaceofyour
machines
• Goodthermalandoxidationstabilityprovideslongoillifeandstableoperation
Performance Level
• ISO VG 46 / 68
High Performance Machine Tool Slideway Oil
HI-WAY
Typical Properties
* The above representative properties are subject to a little deviations.
46
68
45.5
70.1
7
9.2
113
108
<-40
-35
222
226
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 60: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/60.jpg)
60
Product Use • RecommendedforalltypesofindustrialequipmentinmildloadEPcondition
Product Performance
• Excellentthermalandoxidationstabilitytopreventdowntimeortroubles• ExcellentEPandanti-wearproperties• Goodseparationbetweenwaterandlubricants• Goodfilterabilityeveninthepresenceofwater• Improvedfulidityincoldconditionhelpsefficientinanyweathercondition
Performance Level
• U.S. Steel 224 • AGMA 9005-E02
• DIN 51517 PART 3 • David Brown S1.53.101
• Fives Cincinnati Gear oils • ISO 12925-1 CKC/CKD
High Performance Industrial Gear Oil
GEAR LUBE
Typical Properties
* The above representative properties are subject to a little deviations.
100
150
220
320
460
99.4
148.2
219.2
325.6
469.2
11.7
15.1
19.4
25
31.4
106
102
100
99
97
-24
-20
-18
-16
-15
248
266
274
292
316
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
INDUSTRIAL OIL
![Page 61: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/61.jpg)
61
Product Use • Steam&Hydraulicturbinesoperatingunderallserviceconditions
Product Performance
• Goodanti-foamperformanceforequipmenttroublecontrol
• Goodfilterabilityeveninthepresenceofwater
• Environmentalfriendlyformulationwithashlessadditivetechnology
• Excellentprotectionagainstrustandcorrosion
• Gooddemulsibilityensuringrapidwaterseparation
• Reducedmaintenancecostsduetohighoxidationandthermalstability
• Goodresistancetooxidationavoidingformationofsludgeatnormaloperation
temperatureandensuingalongservicelifeofthefluidthankstohighquality
synthetic base oil
Performance Level
• DIN 51515, PART I (L-TD), PART II (L-TG) • CEGB Standard 207001
• Siemens TLV 9013 04/01 •BrownBoveriHTGD90117• British Standard BS489 • U.S. Steel 120
• General Electric GEK 32568 A/C • Westinghouse Electric Corp
• MIL-L-17672D/17672D •AlstomHTGD90117V0001S
Synthetic Industrial Turbine Oil
TURBINE OIL
Typical Properties
* The above representative properties are subject to a little deviations.
32
46
33.2
46.5
5.8
7.8
129
129
-37
-31
242
245
SAE viscosity
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity index
Pourpoint(℃)
Flash point(℃)
![Page 62: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/62.jpg)
62
Product Use • Aluminummetals:Milling,Turning,Drilling,Grindingetc.• Ferrousmetals:Milling,Turning,Drilling,Grindingetc• Cutting:5~15%,Grinding:3~7%byvolume• Termofvalidity:12monthsfromthedateofmanufactureatsealedstate,0to40℃
Product Performance
• Ithasanexcellentlubricity,suitedforaluminumhighspeedprocessing.• Ithasagoodanti-rustingability,canbeappliedtoferrousmetals.• Ithaveagoodanti-decomposiotionability,emulsficationstability,anti-foamingability, cleaning ability, thus, may reduce emission for pollutants and dedicate worker to their operation condition.
High Performance Emulsion Type Water Soluble Cutting Fluids
METAL CT
Typical Properties
Appearance
Specific gravity
pH,roomtemp
Test Items
ASTM D1122
ASTM D1287
Method
conc
x10
15/4℃
x10
Unit
Yellowsemitransparent
Milky
0.95
9.6
S-OIL METAL CT 960
Performance Level Cast
Iron
Low-carbon
steel
High-carbon
steel
Non-ferrous metals
Stainlees steel
Heat-resistant
steel
Low billet
aluminum
High billet
aluminum
Reaming
Drilling
Milling
Tapping
Turning
Grinding
5%
4%
4%
4%
4%
3%
5%
4%
4%
8%
8%
3%
5%
5%
5%
8%
8%
3%
5%
5%
5%
8%
8%
3%
6%
5%
5%
8%
8%
3%
6%
6%
6%
8%
8%
3%
6%
6%
6%
8%
8%
5%
8%
8%
8%
8%
8%
5%
INDUSTRIAL OIL
![Page 63: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/63.jpg)
63
Product Use • S-OILMarineCLSeriesarerecommendedasacylinderlubricant
for all types of slow speed cross-head two stroke diesel
Product Performance
• Usestrongalkaliadditivestopreventscorrosionwearofthecylinderliners
• Highviscosityindexmaintainastrongfilmstrengthathightemperature
• Outstandingdetergencycapabilityleadstocleanderpistonringsandliners
• Excellentthermalstabilitycanleadtoreducedcarbondepositsandsludgeformation
Performance Level
• Man(2550, 7050, 10050)
Cylinder Lubricant For 2-Stroke Low Speed Diesel Engine
MARINE CL
Typical Properties
126.5
214.9
220.2
127.1
209.8
211.7
202.6
CL 2540
CL 2550
CL 4050
CL 5040
CL 5050
CL 7050
CL 10050
25
25
40
55
55
70
100
40
50
50
40
50
50
50
14.0
19.8
19.7
14.1
19.4
19.6
19.4
107
105
102
109
105
105
109
-15
-14
-37.5
-27
-28
-26
-29
249
272
256
264
260
268
258
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity indexSAETBNProducts
Pourpoint(℃)
Flash point(℃)
![Page 64: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/64.jpg)
64
Product Use • S-OILMarineTPseriesareprimarilyrecommended for use in high-output trunk piston marine diesel engines operating on heavy residual fuels
Product Performance
• ExcellentTBNretention,withlowconsumption• Lowcylinderswearrates• Cleanerpiston,portsandcylinders,thusextendingoverhauls• Fastseparationfromwaterincaseofwatercontamination• Lowundercrowndeposits• Controlssludgeformation,thusincreasingoilfilterlife and reduces cleanding frequencies
Medium-Speed Trunk-Piston Diesel Engine Oil
MARINE TP
• SAE 40Performance Level
Typical Properties
98.3
128.2
96.2
129.4
125.6
122.7
TP 1230
TP 1240
TP 1530
TP 1540
TP 3040
TP 4040
12
12
15
15
30
40
30
40
30
40
40
40
11.6
13.9
11.5
14.0
14.0
14.0
106
106
107
106
110
112
-20
-19
-20
-18
-14
-13
254
256
250
272
258
258
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity indexSAETBNProducts
Pourpoint(℃)
Flash point(℃)
INDUSTRIAL OIL
![Page 65: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/65.jpg)
65
Product Use • S-OILMarineSOseriesareahighperformancesystemoilthatensuresenhanced
cleanliness for two-stroke, crosshead type marine diesel engines operating
under severe conditions.
Product Performance
• Cleancrankcaseandcirculationtanks
• Outstandingpiston-coolingefficiency
• Increaseprotectionagainstgearandbearingloadcarrying
• Provideimprovedrustprotection
• Excellentwatertoleranceandseparation
• SuperiorFZGperformanceandretentionwithoutimpacttodemulsibility
Performance Level
• SAE 30(MAN) •SAE 20, 40
High Quality Marine System Oil
MARINE SO
Typical Properties
61.3
97.4
139.3
SO 0520
SO 0530
SO 0540
5
5
5
20
30
40
8.5
11.5
14.5
110
106
103
-19
-18
-18
241
254
256
Kinematic viscosity, mm²/s(cSt)
40℃ 100℃
Viscosity indexSAETBNProducts
Pourpoint(℃)
Flash point(℃)
![Page 66: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/66.jpg)
66
Applications • S-OILGREASEMPisatruemultipurposelubricantgreaseusedinautomotive and general industrial applications except on high-load or shock-loading applications, formulated to offer the best lubrication performance within –20℃∼130℃.• S-OILGREASEEPisamultipurposeextremepressurelithiumgreaseextensively used for industrial applications, including high-load and high-shocking automotive and marine applications.• S-OILGREASEEP000,00and0areformulatedprimarilyforintensivegreasing applications on transfer pump onboard concrete pump car.
Advantages • Excellentmechanicalstabilityandshearstabilityminimizespenetration variation even after rigorous operation.• Excellentoxidationstabilitypreventshardeningordeposition even in continued use at high temperature or long-term storage.• S-OILGREASEEPcontainsaspecialextremepressureadditive,whichimproves load-bearing performance significantly and prevents disruption of the lubrication film even when subject to shock loads.• Formulatedspecificallytoprovidesufficientresistantagainstwashoutcaused by contact with moisture, preventing corrosion of the bearing surface because of mixing of water.
Specifications • KS M 2130 •ISO L XBCDA (S-OIL GREASE MP)
• ISO L XBCFB (S-OIL GREASE EP)
Multipurpose Extreme Pressure Grease
GREASE MP/EP
GREASES
Characteristics
* The typical characteristics are given as a guide only.
NLGI grade
TEXTURE
Color
Penetration 25℃
Copper corrosion
100℃X24Hr
Dropping point
ASTM D-217
-
ASTM D-1500
ASTM D-217
ASTM D-130
IP 396/DIN ISO 2176
MethodTest items
-
-
-
0.1mm
-
℃
0
385
1a
190
2
Smooth
Brown
278
1a
216
3
237
1a
219
000
450
1a
137
00
416
1a
171
0
370
1a
189
1
317
1a
201
Smooth
Dark Brown
2
276
1a
217
3
238
1a
219
Unit S-OIL GREASE MP S-OIL GREASE EP
![Page 67: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/67.jpg)
67
Applications • S-OILGREASESUPEREPisamultipurposegreasethickened
with lithium soap thickener and refined mineral base oil.
• Ithasoutstandingwaterresistanceandcorrosionprotection.
• S-OILGREASESUPEREPiswellsuitedformultipurposelubrication.
Advantages • Lubricationforballbearingsinautomotiveandgeneralindustrialuses.
Useful Temperture
• -30~140℃
Multipurpose Lithium Grease
GREASE SUPER EP
Characteristics
* The typical characteristics are given as a guide only.
NLGI grade
TEXTURE
Color
Penetration 25℃
Copper corrosion
100℃X24Hr
Dropping point
ASTM D-217
-
ASTM D-1500
ASTM D-217
ASTM D-130
IP 396/DIN ISO 2176
MethodTest items
-
-
-
0.1mm
-
℃
2
Smooth
Pale brown
285
1a
220
Unit S-OIL GREASE SUPER EP
![Page 68: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/68.jpg)
68
Applications • S-OILGREASEMOLYisatruemultipurposegrease,formulatedforlubricationofvarious shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.• S-OILGREASEMOLYissuitableforboundarylubricationathighpressures and high temperatures. In case of accidental overheating, the presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.• S-OILGREASEMOLYalwaysavoidcontaminationofthegreasebydust and/or dirt when applying.preferably use a pneumatic pump system or cartridges.
Advantages • S-OILGREASEMOLYformsadurablelubricationfilm,resultinginreduction of maintenance and down-time costs.• Misciblewithmostotherconventionalsoapgreases• Excellentmechanicalstabilityavoidingejectionorlossofconsistencyduringoperation.• Excellentadhesiontometal.• Goodthermalstability,leadingtohighresistancetotemperaturevariations.• S-OILGREASEMOLYdoesnotcontainlead,orotherheavymetalsconsideredharmful to human health and the environment.
Specifications • ISO 6743-9: L-XBCEB 1, L-XBCEB 2 •DIN 51 502: MPF1K -30, MPF2K -25
Multipurpose Extreme Pressure Lithium Grease with Molybdenum Disulfide
GREASE MOLY
GREASES
Characteristics
* The typical characteristics are given as a guide only.
NLGI grade
TEXTURE
Color
Operating Temperature
Penetration 25℃
4-Ball Weld Load
Copper corrosion, 100℃X24Hr
Dropping point
Test items
2
Smooth
Gray
-25~130
276
400
1a
>190
S-OIL GREASE SUPER EP
ASTM D-217
-
ASTM D-1500
-
ASTM D-217
ASTM D-2596
ASTM D-130
IP 396/DIN ISO 2176
Method
-
-
-
℃
0.1mm
kgf
-
℃
Unit
![Page 69: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/69.jpg)
69
Applications • S-OILGREASEHTisapremiumhigh-speed,thermal-resistantgreaseformulated
for automotive wheel bearings, using lithium complex-based thickener,
refined mineral oil, and various additives.
• Forautomotive(passenger/commercialvehicles)wheelbearings.
• Forhigh-temperature,high-speedbearinglubricationofgeneralindustrialmachinery.
Advantages • Excellentlubricationperformanceathightemperaturesforthermalresistance
and mechanical stability of the lithium complex thickener, avoiding ejection
or loss of consistency when used in high-speed wheel bearings for a long time.
• Excellentwaterresistance,resultinginlesswaterwashoutinconditions
where frequent contact with moisture is expected.
• Excellentresistanceagainstwearandload,minimizingthebearingwear
under high load thus guaranteeing lubrication for a long time.
• Compatiblewithsyntheticresins,preventingdamagetosyntheticresin-based
sealing materials even under long-term contact with it.
Specifications • ISO 6743-9: L-XCGIB 2 •DIN 51 502: KP2S-30
Lithium Complex Wheel Bearing Grease
GREASE HT
Characteristics
* The typical characteristics are given as a guide only.
NLGI grade
TEXTURE
Color
Operating Temperature
Penetration 25℃
4-Ball test
Dropping point
Test items
2
Smooth/Buttery
Amber
-30~200
280
>250
265
3
Smooth/Buttery
Amber
-30~200
235
>250
260
S-OIL GREASE HT 2 S-OIL GREASE HT 3
ASTM D 217
-
ASTM D-1500
-
ASTM D-217
ASTM D-2596
IP 396/DIN ISO 2176
Method
℃
0.1mm
kgf
℃
Unit
![Page 70: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/70.jpg)
70
GREASES
Applications • S-OILGREASELTismadefrommixedbaseoilandlithiumsoapthickener.
• Ithasexcellentperformanceoflowtemperatureandwaterresistance.
• S-OILGREASELTworkswellforautomotivebodylubrication
where excellent low temperature performance is required.
Advantages • Lubricationforautomobilepartssuchasbody,chassis,motorbearings
and window regulator.
Useful Temperture
• -40~150℃
Low Temperature Lithium Grease
GREASE LT
Characteristics
* The typical characteristics are given as a guide only.
NLGI grade
TEXTURE
Color
Penetration 25℃
Copper corrosion, 100℃X24Hr
Dropping point
Test items
2
Smooth
Pale brown
281
1a
230
S-OIL GREASE SUPER EP
ASTM D-217
-
ASTM D-1500
ASTM D-217
ASTM D-130
IP 396/DIN ISO 2176
Method
-
-
-
0.1mm
-
℃
Unit
![Page 71: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/71.jpg)
71
What needs to be considered after securing a stable supply line of lube base oil is ‘formulation’ which is a mixing
ratio for product development. Each lubricant product is developed base on the unique mixing ratio of ingredients
and competitive lubricant developers are more knowledgeable about the development of an optimal mixing ratio.
S-OIL have acquired a lot of experience in lubricant development by supplying a wide range of products such as
engine oil and gear oil to leading automakers including Hyundai-Kia Motors, GM Korea, Renault Samsung Motors,
Ssangyong Motor, Toyota, Lexus, etc. for 25 years since its debut in the lubricant business. We also supply the
passenger car gasoline/diesel engine oils for factory fill to Hyundai-Kia Motors and recently began supplying the
high-quality eco-friendly commercial diesel engine oils that satisfy the Euro VI, a new emission limit, for factory fill to
Hyundai-Kia Motors.
Moreover, S-OIL has kept its reputation as a leading oil refinery company as it was recognized for having
technologies in various special products other than automotive engine oils by supplying special oils such as engine
oils for construction equipment and hydraulic oils to diverse industrial sectors in Korea.
- Mercedez Benz - Volkswagen - Ford
- JASO - Porsche - Cummins
- General Motors - MAN Truck&Bus - ZF
- Allison - NMMA - POSCO
- HKMC - MAN Marine - Daimler
Lubricants Certificate
![Page 72: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/72.jpg)
ZF POSCOAllison
Ford JASO Porsche Cummins
NMMA
S-OIL Corporation
KOREA, REPUBLIC OF
121805 SeoulS-OIL Bldg., 471 Gongdeok-dong
S-OIL 7 Gear EP LL
Dear Madam / Sir
Due to your confirmation that the formulation of your lubricant S-OIL 7 Gear EP LL (ZF approvalnumber ZF001263) has not changed and will continue to conform to the data of your approvalapplication of 2013-02-26, we confirm approval for application according to the ZF Lubricant Class/es
• TE-ML 02L
• TE-ML 16K
Approval is valid for 12 months. If after 11 months you use our approval system "lubricant data file" toconfirm unaltered condition of the formulation, approval will be extended by another 12 months. Ifnot, approval will automatically be withdrawn. A reminder will be mailed to you in good time.
Best regards
Stella Braunschweig
Approval is based on the data in your approval application of 2013-02-26, extended on 2017-01-02.Any alterations of these data will result in withdrawal of approval and the need to submit a newapplication. You are under the obligation to report any changes to approved products without delay.The approval of this oil is subject to the General Terms and Conditions for Research and DevelopmentServices (applicable as of 11/2015) of ZF Friedrichshafen AG.
S-OIL Corporation
KOREA, REPUBLIC OF
121805 SeoulS-OIL Bldg., 471 Gongdeok-dong
S-OIL 7 Gear EP LL
Dear Madam / Sir
Due to your confirmation that the formulation of your lubricant S-OIL 7 Gear EP LL (ZF approvalnumber ZF001263) has not changed and will continue to conform to the data of your approvalapplication of 2013-02-26, we confirm approval for application according to the ZF Lubricant Class/es
• TE-ML 02L
• TE-ML 16K
Approval is valid for 12 months. If after 11 months you use our approval system "lubricant data file" toconfirm unaltered condition of the formulation, approval will be extended by another 12 months. Ifnot, approval will automatically be withdrawn. A reminder will be mailed to you in good time.
Best regards
Stella Braunschweig
Approval is based on the data in your approval application of 2013-02-26, extended on 2017-01-02.Any alterations of these data will result in withdrawal of approval and the need to submit a newapplication. You are under the obligation to report any changes to approved products without delay.The approval of this oil is subject to the General Terms and Conditions for Research and DevelopmentServices (applicable as of 11/2015) of ZF Friedrichshafen AG.
Mercedez Benz
General Motors MAN Truck & Bus
Volkswagen
72
CERTIFICATE
![Page 73: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/73.jpg)
MAN Marine
Daimler
HKMC
73
![Page 74: LUBRICANTS - s-oil7.com](https://reader035.fdocuments.in/reader035/viewer/2022072215/62d9da4a25cb214cc86d1583/html5/thumbnails/74.jpg)
S-OIL CorporationS-OIL Bldg., 192, Baekbeom-ro, Mapo-gu, Seoul, 04196, Korea
Business Inquiry : [email protected]
Homepage:www.s-oil7.com