Lubricants - Product Data Sheets

PETROSPECS

LUBRICANTS

Lubricants: Section 4 Petro Specs - PRODUCT CATEGORIES Rev. Dec /13

PETROSPECSLUBRICANTS

HEAVY DUTY DIESEL MOTOR OILS• D-MO® Gold• D-MO® Gold SL & SB• D-MO®

PASSENGER CAR MOTOR OILS• SONIC® Silver• SONIC® Gold SL• SONIC® Green

TRANSMISSION OILS• SONIC® ATF (Dexron® III/Mercon®)• SONIC® ATF SL• SONIC® ATF Type F

GEAR & DRIVE TRAIN OILS• SONIC® Gear Oil• SONIC® Gear Oil SL• SONIC® Industrial Gear Oil• SONIC® Torc Series IV

TRANS-HYDRAULIC FLUIDS• T-HF• Super T-HF SB

INDUSTRIAL HYDRAULIC OILS• Industrial Hydraulic Oil• Industrial Hydraulic Oil SL• Industrial Hydraulic Oil MV/HVI• Industrial Hydraulic Oil Zinc Free 46

RECREATIONAL VEHICLE OILS• SONIC® Two-Cycle Oil• SONIC® Dynamix Plus• SONIC® XL-S• SONIC® 4-Stroke SL

GREASE• SONIC® Blue Guard• SONIC® Silver Guard SL• SONIC® Moly Guard SL• SONIC® Flow-Rite Grease• SONIC® Gear Box Grease• SONIC® Food Machinery Grease

INDUSTRIAL & MISC. OILS• SONIC® Chain Oil• SONIC® Saw Guide Oil• SONIC® Locomotive Engine Oil• SONIC® Natural (and L.P.) Gas Engine Oil• SONIC® Heat Transfer Fluids• SONIC® AR-Drill Oil• SONIC® Turbine R&O Oil• SONIC® Vacuum Pump Oil• SONIC® Process Oil• SONIC® De-Dusting Oil• CRC Compressor Fluid• Steam Cylinder Fluid

LUBRICANT PRODUCTCATEGORIES

NOTE: When printing a specific Petro Spec sheet, front (page 1 of 2) and back (page 2 of 2), ensure that the desired pages are selected.

Lubricants: Section 4 Petro Specs - PRODUCT LIST Rev. Dec /13


• CRC Compressor Fluid• D-MO®

• D-MO® Gold• D-MO® Gold SL & SB• Industrial Hydraulic Oil• Industrial Hydraulic Oil MV/HVI• Industrial Hydraulic Oil SL• Industrial Hydraulic Oil Zinc Free 46• SONIC® 4-Stroke SL• SONIC® AR-Drill Oil• SONIC® ATF (Dexron® II/Mercon®)• SONIC® ATF SL• SONIC® ATF Type F• SONIC® Blue Guard• SONIC® Chain Oil• SONIC® De-Dusting Oil• SONIC® Dynamix Plus• SONIC® Flow-Rite Grease• SONIC® Food Machinery Grease• SONIC® Gear Box Grease• SONIC® Gear Oil• SONIC® Gear Oil SL• SONIC® Gold SL

• SONIC® Green• SONIC® Heat Transfer Fluids• SONIC® Industrial Gear Oil• SONIC® Locomotive Engine Oil• SONIC® Moly Guard SL• SONIC® Natural (and L.P.) Gas Engine Oil• SONIC® Process Oil• SONIC® Saw Guide Oil• SONIC® Silver• SONIC® Silver Guard SL• SONIC® Torc Series IV• SONIC® Turbine R&O Oil• SONIC® Two-Cycle Oil• SONIC® Vacuum Pump Oil• SONIC® XL-S• Steam Cylinder Fluid• Super T-HF SB• T-HF

LUBRICANT PRODUCT LIST(ALPHABETICAL)

NOTE: When printing a specific Petro Spec sheet, front (page 1 of 2) and back (page 2 of 2), ensure that the desired pages are selected.

Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® D-MO® GOLD Rev. Dec /13


DESCRIPTIONCO-OP® D-MO® GOLD is recommended for all naturally aspirated and high-output turbocharged four-stroke diesel engines requiring an API CJ-4 service classification in either a 15W-40 or 10W-30 viscosity grade. All CO-OP® D-MO® GOLD products are formulated for use in EPA compliant low emission engines. These engines have been manufactured since 2007 and utilize advanced exhaust after treatment devices such as Diesel Particulate Filters (DPFs) and Selective Catalytic Reduction (SCR) systems. CO-OP® D-MO® GOLD is fully back-serviceable and carries all required licences for pre-2007 diesel engines.

APPLICATIONCO-OP® D-MO® GOLD motor oils are exceptional choices in pre and post 2007 on-road and a majority of off-road applications. CO-OP® D-MO® GOLD products are used in equipment found in: Agriculture, Trucking, Road Construction, Forestry, Mining and the Oil Field. CO-OP® D-MO® GOLD multi-grade motor oils may also be used in hydraulic applications when a SAE multi-grade oil is recommended.

PERFORMANCE FEATURESCO-OP® D-MO® GOLD provides superior performance in the areas of:

• Shear stability• Extended service capabilities• Fuel economy• Soot control• Oxidative stability

CO-OP® D-MO® GOLD also:• Reduces valve train wear• Reduces engine deposits• Reduces oil consumption

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

15W-40 X X X X X

10W-30 X X X X X

APPROVED FOR / SUITABLE FOR:• API CJ-4, SN• API CI-4 PLUS• CI-4, CH-4• API SL, SJ• ACEA E7/E9• CAT ECF-3/2/1• CES 20081, 20076, 20072• Detroit Diesel 93K218• Mack EO-O Premium Plus (07)• Volvo VDS-4, 3, 2• MB 228.31, 228.3, 228.1• MTU Type I/II• Renault RLD-3

TYPICAL PROPERTIESThe values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification.

SAE Grade 15W-40 10W-30

Kinematic Viscosity cSt @ 40˚C 121.7 84.04

Kinematic Viscosity cSt @ 100˚C 15..75 11.91

Viscosity Index 137 135

Pour Point ˚C -36 -39

CCS (Cranking), cP @ ˚C 4861 @ -20 6411 @ -25

Borderline Pumping, cP @ ˚C 20,203 @ -25 25,473 @ -30

HTHS @ 150˚C, cP 4.18 3.54

Ash < 1.0% < 1.0%

Zinc (PPM) 1015 1085

TBN 8.8 8.86

D-MO® GOLDHEAVY-DUTY DIESEL MOTOR OIL15W-40 & 10W-30

Return to Product Categories

Lubricants: Section 4 • Page 2 of 2

PETROSPECS

PRODUCT LINECO-OP® offers a full range of Agricultural, Commercial and Automotive lubricants marketed under both the CO-OP® and SONIC® brand names. Our lubricants are proudly manufactured in Saskatchewan and locally available at Retail Co-operatives. If you would like to know more about CO-OP® lubricants and greases please speak to your local Co-op representative or contact Federated Co-operatives Limited directly at the numbers shown below.

ENVIRONMENTAL HEALTH & SAFETYProduct specific Material Safety Data Sheets (MSDS) can be obtained by contacting your local Retail Co-op, Federated Co-operatives Limited (see contact information below) or online at www.coopconnection.ca.

DISPOSAL OF USED LUBRICANTS AND CONTAINERSPlease protect the environment when disposing of petroleum products. All products should be taken into an authorized collection facility or picked up by a qualified organization. This ensures the products will be disposed of in an environmentally sensitive manner. For additional information on used oil recycling programs please see:

• Saskatchewan www.usedoilrecyclingsk.com • Alberta www.usedoilrecyclingab.com • British Columbia www.usedoilrecycling.com/en/bc • Manitoba www.usedoilrecycling.com/en/mb

LUBRICANTS

® CO-OP and the CO-OP logo are registered trade-marks of TMC Distributing Ltd., Saskatoon S7K 3M9® D-MO and ® SONIC are registered trade-marks of Federated Co-operatives Limited, Saskatoon S7K 3M9

CONTACT INFORMATIONFor more information on this or any other CO-OP® Petroleum product, please contact your local Retail Co-operative orFederated Co-operatives Limited:E-mail: [email protected]

Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® D-MO® GOLD SL & SB Rev. Dec/13


DESCRIPTIONCO-OP® D-MO® GOLD SL 0W-40 is a fully synthetic premium all-season motor oil. Unlike many competitive products, D-MO® GOLD SL utilizes 100% API Group IV base oils. These base oils, also known as Polyalpholefins (PAOs), are blended with some of the industry’s most advanced additives to create a truly high-performance diesel engine oil.

CO-OP® D-MO® SB 5W-30 combines a unique blend of conventional API Group II and 100% synthetic API Group IV (PAO) base oils. As with all D-MO® GOLD engine oils, our Synthetic Blend (SB) is fully compatible with emission systems (DPFs, SCRs) and legacy (pre-2007) on and off-road engines.

APPLICATIONSCO-OP® D-MO® GOLD SL & SB Motor oils are exceptional choices in pre and post 2007 on-road and a majority of off-road applications. D-MO® GOLD SL & SB products are used in equipment found in: Agriculture, Trucking, Road Construction, Forestry, Mining and the Oil Field. D-MO® Multi-Grade motor oils may also be used in hydraulic applications when an SAE multi-grade oil is recommended.

PERFORMANCE FEATURESCO-OP® D-MO® SL & SB provides superior performance in the areas of:

• Low temperature fluidity• Extended engine life• Shear stability

• Extended service capabilities• Fuel economy• Soot control• Oxidative stability• Foam control

CO-OP® D-MO® SL & SB also:• Reduces valve train wear• Reduces engine deposits• Reduces oil consumption

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

SB 5W-30 x x x x

SL 0W-40 x x x x x

APPROVED FOR / SUITABLE FOR:CO-OP® D-MO® GOLD engine oils are approved or suitable to be used in equipment calling for:


SAE Grade SB 5W-30 SL 0W-40




CCS (Cranking), cP @ ˚C 5110 @ -30 6099 @ -35

Borderline Pumping, (cP @ ˚C) 20,241 @ -35 32,836 @ -40

HTHS @ 150˚C, cP 3.5 4.1

Pour Point ˚C -48 -57

Ash < 1.0% < 1.0%

Zinc (PPM) 989 978

TBN 8.8 8.8

Synthetic Synthetic Blend 100% Synthetic

D-MO® GOLD SL & SBSYNTHETIC/SYNTHETIC BLEND HEAVY-DUTY DIESEL MOTOR OIL

• API CJ-4, SN• API CI-4 PLUS• CI-4, CH-4• API SL, SJ• ACEA E7/E9• CAT ECF-3/2/1• CES 20081, 20076, 20081• Detroit Diesel 93K218• Mack EO-O Premium Plus (07)• Volvo VDS-4, 3, 2

• MB 228.31, 228.3, 228.1• MTU Type I/II• Renault RLD-3



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® D-MO® Rev. Dec /13


DESCRIPTIONCO-OP® D-MO® Single Grades (10W, 20W-20, 30, 40, 50) are premium mineral based heavy-duty motor oils. They have been formulated to provide superior performance in engines fueled by diesel, gasoline and propane. CO-OP® D-MO® Single Grades are suitable for use in some on-road and a vast array of off-road applications.

APPLICATIONS / SPECSCO-OP® D-MO® Single grades are recommended for older two and four-stroke diesel and gasoline engines requiring single grade motor oils. CO-OP® D-MO® single grades have a wide variety of uses and are excellent choices in applications calling for a single grade motor oil to be used in:

• Transmissions (Allison C3/C4, Caterpillar TO-2) • Mobile hydraulic systems (D-MO® 10W & D-MO® 30 are

suitable for use in applications calling for Caterpillar TO-2 fluids)

• Yard implements (Lawn mowers, roto-tillers) for gasoline powered units D-MO® 30, 40 maintain API SL technology

CO-OP® D-MO® single grades meet the now obsolete API CF Spec, while 30 and 40 grades also meet API CF-2 / SL.

PERFORMANCE FEATURESCO-OP® D-MO® Single Grades provide superior performance in the areas of:

• Dispersancy additives to reduce engine deposits (varnish / sludge)

• Wear protection which promotes engine durability• Service life extension resulting from oxidation stability• Low ash formulation limits the formation of deposits on

critical engine components

CONTAINERSGrade 12x1 L 4x5 L 2x10 L 20 L 110 L 205 L 1000 L

10W X X X X X

20W-20 X

30 X X X X X X X

40 X X

50 X


SAE Grade 10W 20W-20 30 40 50

Kinematic Viscosity @ 40°C , cSt 34.9 48.9 86.3 146.1 186.5

Kinematic Viscosity @ 100°C , cSt 6.0 7.6 10.8 15.0 18.56

Viscosity Index 120 121 111 108 101

Pour Point (°C) -45 -39 -36 -27 -21

Ash 0.98 0.98 0.98 0.98 0.98

Zinc (PPM) 980 980 980 980 980

TBN 8 8 8 8 8

API Service Classification(s) CF CF CF, CF-2/SL CF, CF-2/SL CF, CF-2

D-MO®HEAVY-DUTY DIESEL MOTOR OIL10W, 20W-20, 30, 40, 50



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® SILVER Rev. Dec /13


DESCRIPTIONSONIC® SILVER motor oils are high-quality multi-grade lubricants for use in today’s gasoline powered cars, SUVs, and light duty trucks. The friction modified formula of SONIC® SILVER reduces friction between moving parts and increases fuel economy*.

APPLICATIONS / SPECSSONIC® SILVER motor oil meets the demanding ILSAC GF-5 and API SN/Resource Conserving performance standards. In addition to reducing wear, retarding varnish build-up and maintaining engine cleanliness, SONIC® SILVER is specifically formulated to improve fuel economy, protect the vehicle emission system and be compatible with ethanol containing fuel up to E85.

SONIC® SILVER is backwards compatible to previous API Service Classifications SM, SL, etc. and ILSAC GF-4.

PERFORMANCE FEATURES• Excellent detergent and dispersancy to ensure engine

cleanliness and long engine life• Contains anti-wear and rust/corrosion inhibitors to protect

vital moving parts• Increased oxidation stability to prevent oil thickening• Friction modified to provide added fuel economy• Protects modern vehicle emission systems• Approved for API SN-Resource Conserving and ILSAC

GF-5 in appropriate viscosity grades

CONTAINERS

Grade 12x1 L 4x5 L 110 L 205 L 1000 L

5W-20 X X X X

5W-30 X X X X

10W-30 X X X X X

10W-40 X X X

*When compared to non-friction modified fluids


SAE Grade 5W-20 5W-30 10W-30 10W-40

Viscosity @ 40°C , cSt 50.2 63.3 -67.8 97.2

Viscosity @ 100°C , cSt 8.5 10.5 10.3 14.4

Viscosity Index 147 156 138 152

Pour Point (°C) -51 -45 -45 -41

API Service Classification SN/SM/SL SN/SM/SL SN/SM/SL SN/SM/SL

Resource Conserving Y Y Y N

ILSAC Classification GF-5 GF-5 GF-5 –

SONIC® SILVERGASOLINE ENGINE OIL5W-20, 5W-30, 10W-30, 10W-40



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® GOLD SL Rev. Dec /13


DESCRIPTIONSONIC® GOLD SL 0W-30 is a 100% PAO based synthetic gasoline engine oil while SONIC® GOLD SL 5W-20, 5W-30, 10W-30 and 20W-50 are synthetic blends. All SONIC® GOLD motor oils are performance proven lubricants blended for year round use. They are exceptional choices in all gasoline powered vehicles including: turbo charged engines, naturally aspirated high torque engines and performance driven racing engines.

APPLICATIONS / SPECSSONIC® GOLD SL meets the demanding ILSAC GF-5 and API SN-Resource Conserving performance standards. These premium synthetic and synthetic blend lubricants not only provide significantly reduced wear during cold start conditions but also offer superior engine cleanliness. They maintain excellent shear stability and are specifically formulated to improve fuel economy and protect modern emission systems. SONIC® GOLD SL lubricants are compatible with ethanol containing fuel up to E85.

SONIC® GOLD SL is backward compatible to the previous API Service Categories SM, SL, etc.

PERFORMANCE FEATURES• Superior low-temperature performance• Reduces cold start engine wear• Reduces maintenance cost• Improved Oxidative and Shear Stability• Maximizes engine oil life• Improves crankcase cleanliness• Improved viscosity retention at higher temperatures• Reduces wear due to oil viscosity loss at high temperatures • Improves turbo-charger performance• Protects modern vehicle emission systems

CONTAINERS

Grade 12x1 L 4x5 L 205 L

0W-30 X X

5W-20 X X X

5W-30 X X X

10W-30 X X

20W-50 X


SAE Grade 0W-30 5W-20 5W-30 10W-30 20W-50

Viscosity @ 40°C , cSt 52.9 51.1 65.0 67.5 166.0

Viscosity @ 100°C , cSt 9.7 8.6 10.7 10.1 20.3

Viscosity Index 171 147 155 133 143

Pour Point (°C) -60 -51 -48 -42 -30

Phosphorous 0.07 0.078 0.078 0.078 0.080

API Service SN/SM* SN/SM SN/SM SN/SM SN/SM

Resource Conserving Y* Y Y Y N

ILSAC Classification GF-5* GF-5 GF-5 GF-5 –

*Meets the performance of

SONIC® GOLD SLSYNTHETIC / SYNTHETIC BLEND GASOLINE MOTOR OIL0W-30, 5W-20, 5W-30, 10W-30, 20W-50



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® GREEN Rev. Dec /13


DESCRIPTIONSONIC® GREEN is a high-quality 100% re-refined motor oil for today’s environmentally tuned market. It is blended with the highest quality re-refined base oils available and industry leading additives.

Re-refined base oils are not the same as “recycled oil” or “used oil”. Re-refined base oils have been collected, categorized and re-processed (ie, re-refined) removing all traces of wear metals, dirt, fuel and moisture. These now clean base oils are re-energized with fresh additive technology and fully tested to ensure compliance with major OEM and Industry (ie, API) specifications. Most OEM’s fully accept the use of re-refined (API licenced) products in their equipment.

APPLICATIONS / SPECSSONIC® GREEN meets the demanding API SN specification for 2011 and newer vehicles as well as ILSAC GF-5. SONIC® GREEN is approved or suitable for use with virtually any new passenger car/light truck in the appropriate viscosity grade.

PERFORMANCE FEATURES• Environmentally friendly • Blended using 100% re-refined base oils• Meets the latest specifications• API SN & ILSAC GF-5 • Manufactured with friction modifiers to improve fuel

economy • Detergents and Dispersants ensure engine cleanliness• Oxidation stability prevents premature oil thickening• Fully approved for new car warranties

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

10W-30 X X


SAE Grade 10W-30

Kinematic Viscosity @ 40°C , cSt 67.2


Viscosity Index 137.0

Pour Point °C -45

API Service Classification SN/SM/SL

Resource Conserving Y

ILSAC Classification GF-5

SONIC® GREENRE-REFINED PASSENGER CAR MOTOR OIL



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® ATF (DEXRON® III / MERCON®) Rev. Dec /13


DESCRIPTIONSONIC® ATF has been designed to provide the highest level of protection in pre-2006 transmissions. Its design allows for superior cold weather fluidity while ensuring exceptional protection at high temperatures. SONIC® ATF is a Type H based automatic transmission fluid for vehicles requiring a Dexron® III or Mercon® qualified fluid. SONIC® ATF can be used as a top-off or for service fill when Dexron® III (H), III (G), II (E), II or Ford Mercon® is required or recommended.

SONIC® ATF has service applications in a variety of older automatic transmissions including but not limited to; Acura, AMC, Audi, BMW, Chrysler, Jeep, Eagle, Ford, Datsun, Nissan, General Motors, Mazda, Subaru, Toyota, Fiat, Volkswagen, Honda, Hyundai.

APPLICATIONS / SPECSSONIC® ATF meets the performance requirements of:

• Dexron® III/Mercon®

• Allison TES-389• Allison C-3 / C-4 • Allison V-730D• Caterpillar T0-2• GM 6137-M• Ford ESP-M2C166H• Hydraulic & Power Steering Systems

SONIC® ATF (DEXRON® III / MERCON®) should never be used in applications calling for a Type F fluid. For these applications refer to Sonic ATF Type F.

PERFORMANCE FEATURES• Smooth (jerk free) shifting• Excellent frictional durability• Oxidation stability prevents the formation of varnish on

gears and bearings• Exceptional wear protection in both transmission and

hydraulic applications• High Viscosity Index allows fluid to retain adequate

thickness in high heat applications and excellent cold weather fluidity

• Corrosion protection for critical transmission parts

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

ATF X X X X X


ATF (Dexron® III / Mercon®)



Viscosity Index 169

Pour Point (°C) -54

Colour Red

SONIC® ATF (DEXRON® III / MERCON®)AUTOMATIC TRANSMISSION FLUID

Dexron® is a registered trademark of General Motors LLCMercon® is a registered trademark of Ford Motor Corp. Return to Product Categories


PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® ATF SL Rev. Dec /13


DESCRIPTIONSONIC® ATF SL is a fully synthetic Polyalphaolefin (PAO) based multi-vehicle automatic transmission fluid. Engineered for either top-up or as a service fill fluid for a wide variety of automotive (domestic & import) and commercial applications. Designed to outperform conventional AT-fluids SONIC® ATF SL offers superior wear protection, increased drain intervals and increased cold weather flow-ability

APPLICATIONS / SPECSSONIC® ATF SL meets the performance requirements of:

• Dexron® II / Dexron III• Mercon®, Mercon® V, Mercon® SP• Chrysler ATF+3, ATF+4• Toyota Type T, T-III, T-IV & WS• Honda Z1, DW-1 • Diamond SP II, SP III, SP IV, Red-1• Mazda M-III, M-V• Subaru ATF, ATF-HP• Nissan Matic D, J, K & S• Volvo 97340• MB 236.1/.2/.3/.4/.5/.6/.7/.8/.9/.11 • Voith 55.6335.XX (G607, G1363)• Saab 93 165 147• Suzuki 3314, 3317• BMW 7045E, LA2634, LT71141• ZF TE-ML 02F, 11A, 14A, 14B, 14C, 16L, 17C• Allison C-4, TES 389, TES 295• JASO 1A

PERFORMANCE FEATURES• Synthetic formulation• Improved fuel mileage• Extends transmission life• Exceptional low temperature fluidity• Reduces varnish build up• Improves high temperature operation• Corrosion protection• Maintains lubricity under severe operating conditions• Excellent shift feel• No transmission shudder

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

ATF SL X X


ATF SL



Viscosity Index 172


Colour Red

SONIC® ATF SL MULTI-VEHICLE SYNTHETIC AUTOMATIC TRANSMISSION FLUID

Dexron® is a registered trademark of General Motors LLCMercon® is a registered trademark of Ford Motor Corp.



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® ATF TYPE F Rev. Dec /13


DESCRIPTIONSONIC® ATF TYPE F is a premium-quality automatic transmission fluid designed specifically for all pre-1977 Ford Automatic transmissions. The frictional properties of Type F fluids differ drastically from those used in modern transmissions. Type F fluids maintained high frictional properties that allow clutches to engage quickly; a property not required in modern transmission designs.

APPLICATIONS / SPECSSONIC® ATF TYPE F is suitable for use in the following:

• Pre-1977 Ford C6 Automatic Transmissions• Applications requiring the use of a fluid that conforms to the

Obsolete Ford ESW-M2C33-F specification• Some older Mazda, Toyota and Volvo vehicles requiring the

use of Ford ESW-M2C33-F fluids• Select Pre-1980 Ford Power steering systems• Additional OEM equipment requiring a Non-Friction

modified fluid

NOTE: Always consult your owner’s manual. Do NOT use this fluid in applications calling for GM Dexron II / III, Ford Mercon V/LV/SP and/or other applications requiring a modern friction modified transmission fluid.

PERFORMANCE FEATURES• Maintains a high co-efficient of friction at low-sliding speeds• Oxidation inhibitors aid in preventing deposits on critical

transmission components• Corrosion inhibitors aid in preventing acids from attacking

vital transmission components• Formulated to prevent excessive swelling or shrinkage of

seals

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

Type F X X


ATF Type F



Viscosity Index 177


Colour Red

SONIC® ATF TYPE F PRE-1977 FORD AUTOMATIC TRANSMISSION FLUID



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® MP GEAR OIL Rev. Dec /13


DESCRIPTIONSONIC® MP GEAR OILS are multi-grade automotive gear fluids designed for use in both light and heavy-duty applications. They utilize a unique inorganic borate compound which protects gear surfaces from varnish and sludge. This compound is also known as CGT or Clean Gear Technology. In addition, CGT also benefits the fluid by acting as an extreme pressure agent at low temperatures ensuring continual gear protection. SONIC® MP Gear Oils are safe to use in applications which contain yellow or soft metals such as brass.

APPLICATIONS / SPECSSONIC® MP GEAR OIL is recommended for use in any application requiring a heavy-duty, extreme-pressure gear lubricant. It is approved for API Service GL-5 and meets the performance of Mil-PRF-2105E. The unique formulation of SONIC® MP Gear Oil makes it suitable for top up and complete refill of limited slip differentials.

SONIC® MP GEAR OIL provides superior lubrication in passenger cars, farm equipment, heavy and light-duty trucks and off-highway equipment.

APPROVED FOR / SUITABLE FOR:• API GL-5 / MT-1• MIL-PRF-2105E / MIL-L-2105D• Mack GO-J• SAE J2360• Arvin Meritor 076-D (80W-90)• Ford WSP-M2C197-A (80W-90)• Top-up or complete refill of Limited Slip Applications

PERFORMANCE FEATURES• Extreme pressure additives to provide GL-5 Service• Formulated for complete refill of limited slip differentials• Non-foaming• Water tolerant (excellent for applications where water

contamination may occur)• Exceptional oxidation stability for reduced formation of gear

deposits under high operating temperatures• Superior gear protection under high loads

CONTAINERS

Grade 12x 1 L

4x 5 L 20 L 60 L 110 L

205 L

1000 L

75W-90 X X X

80W-90 X X X X X X X

85W-140 X X X X X


SAE Grade 75W-90 80W-90 85W-140

Viscosity @ 40°C , cSt 84.2 137.0 337.7

Viscosity @ 100°C , cSt 13.5 14.5 26.9

Viscosity Index 163 105 106

Pour Point (°C) -45 -33 -24

Brookfield Viscosity Index, cP @ 110,000 @ -26˚C 90,000@-26˚C -

SONIC® MP GEAR OIL 75W-90, 80W-90, 85W-140



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® MP GEAR OIL SL Rev. Dec /13


DESCRIPTIONSONIC® MP GEAR OIL SL (75W-90 & 80W-140 & SAE 50) is a family of fully synthetic, heavy-duty gear lubricants blended for superior year-round performance. SONIC® MP Gear Oil SL’s synthetic formulation protects your equipment gears in the most severe operating and extreme weather conditions.

SONIC® MP GEAR OIL SL (SAE 50) is a severe service manual transmission fluid capable of extending drain intervals to 500,000 miles.

APPLICATIONSSONIC® MP GEAR OIL SL is recommended for use in transmission, differentials or industrial applications where temperatures or extended drain intervals are of a concern. SONIC® MP GEAR OIL SL 75W-90 is approved for use in DANA SHAES – 256 REV C extended service/warranty applications

APPROVED FOR / SUITABLE FOR:(by appropriate viscosity grade)API GL-5 and MT-1DANA SHAES – 256 REV C, 234ArvinMeritor 0-76N (75W-90) 0-76E (80W-140)Mack GO-J PlusMack TO-A Plus (SAE 50)MIL-PRF-2105E, MIL-L-2105DInternational TMS 6816

SAE J2360

PERFORMANCE FEATURESSONIC® MP GEAR OIL SL provides:

• Exceptional gear protection under extreme pressures• Improved fuel economy versus conventional gear lubricants• Superior cold-weather performance• Extended rust and corrosion protection• Superior shear stability even under high-temperature

conditions• Limited slip applications

- 80W-140 Top-up & complete refill - 75W-90 Top-up only. For refill services please consult owner’s manual for additional limited slip additives.

CONTAINERS

Grade 4x5 L 20 L 205 L 1000 L

75W-90 X X X X

80W-140 X X

SAE 50 X X X


SAE Grade 75W-90 80W-140 SAE 50

Kinematic Viscosity @ 40°C , cSt 84.9 244 114.8

Kinematic Viscosity @ 100°C , cSt 13.5 27.9 16.9

Brookfield Viscosity Index, cP@ 125,000@ -40˚C 31,500@ -26˚C 81,000@ -40˚C


Pour Point °C -45 -42 -48

SONIC® MP GEAR OIL SLFULL-SYNTHETIC GEAR LUBRICANT75W-90, 80W-140, SAE 50



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® INDUSTRIAL GEAR OIL Rev. Dec /13


DESCRIPTIONSONIC® INDUSTRIAL GEAR OILS are premium-quality long-life lubricants infused with Extreme Pressure (EP) additives. They are designed to protect enclosed industrial gear drives and bearing sets under normal, as well as, heavy and shock-loading conditions.

SONIC® INDUSTRIAL GEAR OILS are non-corrosive to gears, lines and bearings that utilize soft/yellow metals (brass, copper). They also provide exceptional cleanliness performance in oxidation testing.

APPLICATIONS / SPECSSONIC® INDUSTRIAL GEAR OIL is recommended for the lubrication of: Bevel, Helical, Herringbone, Internal, Planetary, Rack & Pinion, Spiral-Bevel and Spur Gears operating in normal, heavy or shock-loaded conditions.

Typical applications are found in manufacturing plants, saw mills, construction industries (gravel crushers etc) and oil field (pump jacks).

• AGMA 9005-E02• ATS NS 384.161• David Brown ET-19• DIN 51517-3• Cincinnati Machine • AIST 224 (formerly US Steel 224)

PERFORMANCE FEATURES• Compounded with EP additives to provide extra protection

in heavy loading and shock loading conditions• High V.I. basestocks ensure a wide operating range with

maximum oil film strength• Rust and corrosion inhibitors protect vital moving parts• Excellent water separation which aids in preventing the

formation of oil/water emulsions and the leaching of additives

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

100 X

150 X

220 X


ISO Viscosity Grade EP 100 EP 150 EP 220

Viscosity @ 40°C , cSt 100 150 223.3

Viscosity @ 100°C , cSt 11.1 14.8 17.4


Pour Point -25 -21 -18

SONIC® INDUSTRIAL GEAR OILEP 100, EP 150, EP 220



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® TORC SERIES IV Rev. Dec /13


DESCRIPTIONSONIC® TORC SERIES IV are premium heavy-duty Powershift Transmission/Drive Train fluids (TDTO) specifically designed to meet the stringent Caterpillar TO-4 service specifications.

SONIC® TORC SERIES IV M/S has all the qualities of SONIC® TORC SERIES IV mono-grades, and also offers unsurpassed sheer stability and the added advantage of multi-season performance.

APPLICATIONS / SPECSSONIC® TORC SERIES IV Transmission / Drive Train Oils (TDTO) are recommended or approved for the following:

• Caterpillar TO-4• Caterpillar TO-2• Allison C-4• Komatsu Micro Clutch• API CD (Obsolete)• API GL-3 (Inactive)

Applications typically include:• Powershift and hydrostatic transmissions • Wet brake mechanisms• Differentials and final drives• Hydraulics systems

PERFORMANCE FEATURESSONIC® TORC SERIES IV offers the following features:

• Improves the life of friction material• Superior transmission shift characteristics• Reduces brake chatter and clutch wear• Resists foaming in hydraulic applications• Improves seal compatibility• Excellent load carrying capacity and anti-wear protection• Excellent oxidation stability• Torc Series M/S offers the above features plus exceptional

cold weather protection

CONTAINERS

Grade 20 L 205 L 1000 L

SAE 10W X X X

SAE 30 X X X

M/S X X X


SAE Grade SAE 10W SAE 30 M/S

Viscosity @ 40°C , cSt 33.8 89.4 55.3

Viscosity @ 100°C , cSt 5.8 11.0 10.6


Brookfield Viscosity (cP @ °C) 58,200 @ -35°C 93,000 @ -25°C 5,440 @ -30 °C

Pour Point (°C) -39 -33 -51

SONIC® TORC SERIES IVTO-4 POWERSHIFT TRANSMISSION AND FINAL DRIVE LUBRICANTSSAE 10W, SAE 30, M/S (MULTI-SEASON)



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - THF Rev. Dec /13


DESCRIPTIONCO-OP® T-HF (Trans-Hydraulic Fluid) is a premium performance heavy-duty transmission, differential and hydraulic fluid. CO-OP® T-HF is specifically designed to protect a variety of components on mobile equipment operating within the Agriculture, Forestry and Construction industries. CO-OP® T-HF has been evaluated against the most recent specifications set by the industry’s leading tractor and transmission manufacturers to ensure your equipment is protected at the highest level possible.

APPLICATIONS / SPECSCO-OP® T-HF is recommended for equipment outfitted with a common oil reservoir that operates the Hydraulics, Transmission, Differential, Final Drive, Wet Brake, Power Steering and Power Take-Off systems.

Please see the back side for a complete list of manufacturers.

CO-OP® T-HF (Trans-Hydraulic Fluid) has earned the ability to use the Tractorlife.com Authenticated mark. This mark is granted to manufacturers who have subjected their fluids to independent third party testing to ensure it meets and/or exceeds the

most recent OEM specifications. For additional information, please visit tractorlife.com.

PERFORMANCE FEATURES:CO-OP® T-HF provides superior performance in the areas of:

• Extended Service intervals - Oxidation inhibitors resist thermal breakdown and oil thickening thus extending the products usable life.

• Anti-Rust Protection - Corrosion inhibitors protect vital components both during operation and while the equipment is idle.

• Viscosity Retention - T-HF is extremely Shear Stable allowing it to resist thinning and maintain its ability to protect your investment for long periods.

• Gear Wear Performance - T-HF meets and/or exceeds all major equipment manufacturers gear protection requirements, including those intended for severe cold weather operation.

CONTAINERS4x5 L 2x10 L 20 L 110 L 205 L 1000

LBulk

T-HF X X X X X X X

T-HFTRANS-HYDRAULIC FLUID


T-HF (Trans-Hydraulic Fluid)



Viscosity Index 140

Brookfield Viscosity Index (cP @ -20°C) (cP @ -35°C)

406034,500

Pour Point °C -45

Flash Point °C 205




APPROVED FOR / SUITABLE FOR:CO-OP® T-HF is approved and/or recommended for use in the following:

Manufacturer Specification

John Deere JDM J20C / JDM J20A / JDM J14B / JD 303

Ford New Holland ESN-M2C134-D / ESN-M2C134-A/B/C / ESN-M2C86-B/C / ESN-M2C53-A/B / ESN-M2C48-A/B / ESN-M2C43 / I-286-S / M-2950-S / 35UQ25

Agco POWER FLUID 821XL

Massey-Ferguson M-1110 / M-1127A/B / M-1129A / M-1135 / M-1141 / M-1143 / M-1145

JI Case MS-1204 / MS-1205 / MS-1206 / MS-1207 / MS-1209 / MS-1210

Kubota UDT

White Farm Equipment Q-1826 / Q-1766 / Q-1722 / Q-1766B / Q-1705 / Q-1802 / TYPE 55

Alison C-2 / C-3 / C-4

Volvo WB 101

Denison HF-1 / HF-2

ZF Transmissions TE-ML-05 / TE-ML-06

Other Manufacturers BELARUS / DAVID BROWN / EATON HYDRAULICS / IMT / INTERNATIONAL HOUGH / KIOTO / KOMATSU / DRESSER / LANDINI / LEYLAND / McCORMICK FARMALL / MITSUBISHI / SUNSTRAND HYDRAULICS / UNIVERSAL / VALMET / YANMAR




Saskatchewan www.usedoilrecyclingsk.com Alberta www.usedoilrecyclingab.com British Columbia www.usedoilrecycling.com/en/bc Manitoba www.usedoilrecycling.com/en/mb



Lubricants: Section 4 • Page 1 of 2 Petro Specs - THF SB Rev. Dec /13


DESCRIPTIONCO-OP® SUPER T-HF SB is a premium low-viscosity heavy-duty synthetic blend (SB) Trans-Hydraulic Fluid (T-HF) that is recommended for most common sump farm and/or industrial tractors. CO-OP® SUPER T-HF SB meets or exceeds most major tractor manufacturer’s service requirements/specifications for year-round use. CO-OP® SUPER T-HF SB utilizes some of the industry’s most advanced additive technologies providing the end user with exceptional cold weather performance (-60°C Pour Point), gear protection, water demulsification and frictional material operations (reduces brake chatter and assists in avoiding slip or skip problems).

CO-OP® SUPER T-HF SB has been evaluated against the most recent specifications set by the industry’s leading tractor and transmission manufacturers to ensure your equipment is protected at the highest level possible.

APPLICATIONSCO-OP® SUPER T-HF SB is recommended as an All-Season or Winter Fluid for equipment outfitted with a common oil reservoir that operates the Hydraulics, Transmission, Differential, Final Drive, Wet Brake, Power Steering and Power Take-Off systems.

CO-OP® SUPER T-HF SB has earned the ability to use the Tractorlife.com Authenticated mark. This mark is granted to manufacturers who have subjected their fluids to independent third party testing to ensure it meets and/or exceeds the

most recent OEM specifications. For additional information, please visit tractorlife.com.

Please see the Approvals table on the back for a complete list of manufacturers.

PERFORMANCE FEATURESCO-OP® SUPER T-HF SB provides superior performance in the areas of:

• Low temperature fluidity - protection to temperatures as low as -45˚C. Ensuring smooth operation and reduced cold temperature equipment fatigue.

• Extended service intervals - our unique formulation combines Synthetic and Conventional Base Oils with superior additive chemistry that allows for extended service intervals and reduces the need for seasonal fluid changes.

• Shear Stability - allows it to resist thinning and maintain its ability to protect your investment for long periods.

CONTAINERS2x10 L 20 L 110 L 205 L 1000 L

Super T-HF SB X X X X X


SUPER T-HF SB

Kinematic Viscosity @ 40˚C , cSt 44.8


Viscosity Index 225

Brookfield Viscosity Index (cP @ -20˚C) (cP @ -40°C)

11009620

Pour Point ˚C -60

Flash Point ˚C 192

SUPER T-HF SBSYNTHETIC BLEND TRANS-HYDRAULIC FLUID



PETROSPECS





LUBRICANTS

APPROVED FOR / SUITABLE FORCO-OP® SUPER T-HF SB is approved and/or recommended for use in the following:

Manufacturer Specification

John Deere JDM J20C / JDM J20D / JDM J20A / JDM J14B / JD 303

Ford New Holland ESN-M2C134-D / ESN-M2C134-A/B/C / ESN-M2C86-B/C / ESN-M2C53-A/B / ESN-M2C48-A/B / ESN-M2C43 / I-286-S / M-2950-S / 35UQ25

Agco POWER FLUID 821XL

Massey-Ferguson M-1110 / M-1127A/B / M-1129A / M-1135 / M-1141 / M-1143 / M-1145

JI Case MS-1204 / MS-1205 / MS-1206 / MS-1207 / MS-1209 / MS-1210

Kubota UDT

White Farm Equipment Q-1826 / Q-1766 / Q-1722 / Q-1766B / Q-1705 / Q-1802 / TYPE 55

Alison C-2 / C-3 / C-4

Volvo WB 101

Denison HF-1 / HF-2

ZF Transmissions TE-ML-05 / TE-ML-06

Other Manufacturers BELARUS / DAVID BROWN / EATON HYDRAULICS / IMT / INTERNATIONAL HOUGH / KIOTO / KOMATSU / DRESSER / LANDINI / LEYLAND / McCORMICK FARMALL / MITSUBISHI / SUNSTRAND HYDRAULICS / UNIVERSAL / VALMET / YANMAR



Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® INDUSTRIAL HYDRAULIC OIL Rev. Dec /13


DESCRIPTIONCO-OP® INDUSTRIAL HYDRAULIC OIL is a family of premium quality zinc based anti-wear (AW) hydraulic fluids. They are typically recommended for heavy duty hydraulic systems found within commercial settings and outdoors in mobile equipment. Our premium additive package reduces downtime by preventing sludge, varnish and corrosion from occurring within the system.

APPLICATIONS / SPECSCO-OP® INDUSTRIAL HYDRAULIC OILS are recommended for use in a wide variety of hydraulic systems. It meets the performance requirements of the following:EATON / VICKERS REQUIREMENTS • Industrial Applications (I-286-S) • Mobile Applications (M-2950-S) • Vickers 35VQ25DENSION REQUIREMENTS: HF-1 / HF-2 / HF-0CINCINNATI MACHINE SPECIFICATIONS • P-68 (Light Hydraulic Oils) • P-69 (Heavy – Medium Hydraulic Oils) • P-70 (Medium Hydraulic Oils)LEE-NORSE 100-1JEFFREY NO. 87FORD M-6032U.S.STEEL 136B.F. GOODRICH 0152GENERAL MOTORS • LH-04-1 (Anti-wear Hydraulic Oil – 46 Centistoke) • LH-06-1 (Anti-wear Hydraulic Oil – 46 Centistoke) • LH-15-1 (Anti-wear Hydraulic Oil – 150 Centistoke)

PERFORMANCE FEATURES • Anti-Wear additives prevent premature wear of the hydraulic

pump and circulating system• Oxidation inhibitors protect the hydraulic systems from oil

thickening and varnish buildup• Rust inhibitors protect against corrosion during high

moisture operating conditions• Inhibited against foaming to maintain lubrication and ensure

a positive response in hydraulic systems• All grades maintain excellent thermal stability

CONTAINERS

Grade 4x5 L 20 L 205 L 1000 L

ISO VG 22 X X X X

ISO VG 32 X X X X

ISO VG 46 X X X

ISO VG 68 X X X

ISO VG 100 X X X X

ISO VG 150 X X X


ISO Viscosity Grade 22 32 46 68 100 150

Viscosity @ 40°C , cSt 21.8 31.6 44 68 101 150

Viscosity @ 100°C , cSt 4.1 5.5 6.8 8.9 11.3 14.5

Viscosity Index 105 111 108 105 98 95

Pour Point °C -54 -45 -39 -36 -27 -22

Oxidation Stability 4000+ 4000+ 4000+ 4000+ 4000+ 4000+

Zinc PPM 300 290 285 285 285 285

INDUSTRIAL HYDRAULIC OILISO VG 22, 32, 46, 68, 100, 150



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® INDUSTRIAL HYDRAULIC OIL SL Rev. Dec /13


DESCRIPTIONINDUSTRIAL HYDRAULIC OIL SL is a premium quality all-season zinc based anti-wear hydraulic fluid. The proprietary synthetic blend formulation significantly advances its natural cold weather abilities. This allows for increased productivity and hydraulic system protection in all weather conditions.

APPLICATIONS / SPECSINDUSTRIAL HYRAULIC OIL SL is recommended for use in a wide variety of mobile and stationary hydraulic systems. It meets the performance requirements of, or is suitable to be used in the following:

EATON / VICKERS REQUIREMENTS:• Industrial Applications (I-286-S)• Mobile Applications (M-2950-S)• Vickers 35VQ25

DENISON REQUIREMENTS: HF-0 / HF-2 • HF-O• HF-2

CINCINNATI MACHINE SPECIFICATIONS:• P-68 (Light Hydraulic Oils)• P-69 (Heavy – Medium Hydraulic Oils)• P-70 (Medium Hydraulic Oils)

BOSCH REXROTH

PERFORMANCE FEATURESINDUSTRIAL HYDRAULIC OIL SL provides superior performance in the areas of:

• Minimizing operating costs – All season formulation reduces the need for seasonal changes allowing for inventory consolidation and increased service time.

• All-Season Performance – Synthetic Blend formulation increases cold weather fluidity, amplifies system response times upon cold start and generates greater equipment protection in sub-zero conditions.

• Anti-wear properties – prevent premature wear of hydraulic system components.

• Oxidation stability – increases overall life of the lubricant and decreases sludge and varnish buildup that can significantly affect equipment reliability and operation.

CONTAINERS

Grade 20 L 110 L 205 L 1000 L

ISO 32 X X X


ISO Viscosity Grade Industrial Hydraulic Oil All Weather SL 32

Kinematic Viscosity @ 40°C , cSt 32


Viscosity Index 192


Oxidation Stability, hours to 2.0 TAN 4000+

Zinc (PPM) 300

INDUSTRIAL HYDRAULIC OIL SL



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® INDUSTRIAL HYDRAULIC OIL HVI Rev. Dec /13


DESCRIPTIONCO-OP® INDUSTRIAL HYDRAULIC OIL MV22 AND HVI36 are premium quality zinc based High Viscosity Index hydraulic fluids. They are typically recommended for heavy duty hydraulic systems found within commercial settings, specifically outdoor mobile equipment subjected to temperature swings. Our premium additive package and the products ability to manage temperature fluctuations reduce downtime by removing seasonal change-outs and preventing sludge, varnish and corrosion from occurring within the system.

APPLICATIONS / SPECSCO-OP® INDUSTRIAL HYDRAULIC OILS are recommended for use in a wide variety of hydraulic systems. They meet the performance requirements of the following:EATON VICKERS REQUIREMENTS • Industrial Applications (I-286-S) • Mobile Applications (M-2950-S) • Vickers 35VQ25DENSION REQUIREMENTS: HF-1 / HF-2 / HF-0CINCINNATI MILACRON SPECIFICATIONS • P-68 (Light Hydraulic Oils) • P-69 (Heavy – Medium Hydraulic Oils) • P-70 (Medium Hydraulic Oils)LEE-NORSE 100-1JEFFREY NO. 87FORD M-6032U.S.STEEL 136B.F. GOODRICH 0152

PERFORMANCE FEATURES • Reduced fluid friction at low temperature startups• Zinc based anti- wear protection prevents premature wear

of the hydraulic pump and circulating system• Premium fluid choice for equipment operating in

environments with significant temperature changes. • Oxidation inhibitors protect the hydraulic systems from oil

thickening and varnish buildup• Rust inhibitors protect against corrosion during high

moisture operating conditions• All grades maintain excellent thermal stability

CONTAINERS

Grade 4x5 L 20 L 110 L 205 L 1000 L

MV22 X X X

HVI36 X X X


ISO Viscosity Grade MV22 HVI36

Viscosity @ 40°C , cSt 23.0 33.0

Viscosity @ 100°C , cSt 5.0 6.3


Pour Point °C -57 -57

Oxidation Stability 4000+ 4000+

Zinc PPM 300 300

INDUSTRIAL HYDRAULIC OIL MV/HVIMV22 & HVI36



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - CO-OP® INDUSTRIAL HYDRAULIC OIL ZINC FREE 46 Rev. Dec /13


DESCRIPTIONINDUSTRIAL HYDRAULIC OIL ZINC FREE 46 is a premium quality Zinc Free anti-wear hydraulic fluid. The proprietary formulation combines carefully chosen High Viscosity Index base oils and a sulfur-phosphorous antiwear package. The result is an advanced all-season fluid free of heavy metals. This fluid is designed to be used in hydraulic systems employing soft or yellow metals including sliver coated components.

APPLICATIONS / SPECSINDUSTRIAL HYDRAULIC OIL ZINC FREE 46 is recommended for use in a wide variety of mobile and stationary hydraulic systems. It meets the performance requirements of, or is suitable to be used in the following:

• Hitachi / John Deere mobile equipment

VICKERS REQUIREMENTS:• Industrial Applications (I-286-S)• Mobile Applications (M-2950-S)• Vickers 35VQ25

DENISON REQUIREMENTS: HF-0 / HF-2 • HF-O• HF-2

CINCINNATI MACHINE SPECIFICATIONS• P-69 (Heavy – Medium Hydraulic Oils)• P-70 (Medium Hydraulic Oils)

BOSCH REXROTH

PERFORMANCE FEATURESINDUSTRIAL HYDRAULIC OIL ZINC FREE 46 provides superior performance in the areas of:

• Minimizing operating costs – All season formulation reduces the need for seasonal changes allowing for inventory consolidation and increased service time.

• All-Season Performance – High Viscosity Index formulation increases cold weather fluidity, amplifies system response times upon cold start and generates greater equipment protection in sub-zero conditions.

• Anti-wear properties – prevent premature wear of hydraulic system components by using a zinc-free additive formulation.

• Oxidation stability – increases overall life of the lubricant and decreases sludge and varnish buildup that can significantly affect equipment reliability and operation.

CONTAINERS

Grade 20 L 110 L 205 L 1000 L

ISO VG46 X X X

**This product should not be mixed with conventional zinc based hydraulic fluids. If switching a complete system drain, flush and fill is recommended


ISO Viscosity Grade Industrial Hydraulic Oil Zinc Free 46

ISO Grade 46



Viscosity Index 154


Oxidation Stability, hours to 2.0 TAN 10,000+

Zinc (PPM) <1

INDUSTRIAL HYDRAULIC OIL ZINC FREE 46



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® TWO-CYCLE OIL Rev. Dec /13


DESCRIPTIONSONIC® TWO CYCLE ENGINE OIL is a high quality multi-purpose 2-cycle lubricant recommended for both air and water cooled 2-Stroke engines. It is designed for use in both pre-mix and direct injection applications. SONIC® Two-Cycle Engine Oil has been formulated to meet a variety of manufactures low ash requirements.

APPLICATIONS / SPECSSONIC® TWO-CYCLE ENGINE OIL is recommended for use in two-cycle engines requiring a fuel/oil ratio of 50:1 or less and a NMMA low ash formulation. SONIC® Two-Cycle Engine Oil can be used in chain saws, lawn mowers, snow throwers, and utility motors that require a two-stroke engine oil. In all cases, the manufacturer’s recommendations should be consulted.

NOTE: Do not use this product in equipment that calls for a synthetic two-cycle engine oil.

PERFORMANCE FEATURES• Minimizes ring sticking and spark plug fouling• Minimizes rust, corrosion and exhaust system deposits• Pre-diluted for easier mixing at all temperatures• Prevents piston scuffing• Eliminate pre-ignition• Qualified TC and Low Ash

CONTAINERS

12x1 L 4x5 L 20 L 205 L 1000 L

2-Cycle X


SONIC® Two Cycle Oil



Viscosity Index 134

Pour Point, °C -51

Colour Blue

MIXING TABLEThis table shows the amount of oil that must be added to obtain the gasoline to oil ratio (1 L = 1000 mL)

Gasoline to Oil Ratio 5 L 10 L 15 L 20 L 25 L

16:1 300 mL 600 mL 900 mL 1.2 L 1.5 L

25:1 200 mL 400 mL 600 mL 800 mL 1.0 L

32:1 150 mL 300 mL 450 mL 600 mL 750 mL

40:1 125 mL 250 mL 375 mL 500 mL 625 mL

SONIC® TWO-CYCLE OIL



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® DYNAMIX PLUS Rev. Dec /13


DESCRIPTIONSONIC® DYNAMIX PLUS is a high-quality, ashless universal two-cycle motor oil. It is approved for use as a tank mix lubricant or for direct oil injection engines. It is certified by NMMA and CDG as a TC-W3, Grade 3 fluidity / miscibility. TC-W3 supersedes TC, TC-W and TC-W II performance requirements.

APPLICATIONS / SPECSSONIC® DYNAMIX PLUS is recommended for use in two-cycle snowmobiles, motorcycles, golf carts or outboard motors that:

• Require a TC-W, TC-W II or TC-W3 qualified product.• Require low ash or no ash formulations.• Require a TANK MIX up to and including 100:1 ratio as

recommended by the engine manufacturer.

SONIC® DYNAMIX PLUS works in most water-cooled and air-cooled applications. It meets or exceeds the original equipment performance requirements set by manufacturers.

NOTE: Do not use in Orbital or Ficht designed engines.

PERFORMANCE FEATURES• Improved full throttle performance• Extended engine life• Reduced engine deposits• Reduced engine fouling, under severe operating conditions• Improved light throttle operation

CONTAINERS

12x1 L 4x5 L 20 L 205 L 1000 L

Dynamix X X


Sonic Dynamix Plus



Viscosity Index 158

Pour Point (˚C) -57

Flash Point ˚C / ˚F 72 / 162

Colour Blue

SONIC® DYNAMIX PLUSLIQUID COOLED UNIVERSAL TWO-CYCLE MOTOR OIL



PETROSPECS





ORIGINAL EQUIPMENT TWO-CYCLE OIL COMPARISON CHART – SONIC DYNAMIX PLUS

MANUFACTURER SONIC XL-S SONICTWO-CYCLE

SONICDYNAMIX PLUS

ARCTIC CAT BOMBARDIER POLARIS YAMAHA EVINRUDE

JOHNSON MERCURY SUZUKI

SNOWMOBILE

ARCTIC CAT R Q Tiger Shark

SKI-DOO R Q Rotax

MOTOSKI R Q Rotax

POLARIS R Q Polaris Two-Cycle

YAMAHA R Q Yamalube

PERSONAL WATER CRAFT


SEA-DOO R Q Rotax

BOMBARDIER R Q Rotax

KAWASAKI R Q


TIGER SHAW R Q Tiger Shark

WET JET R Q

WILD CAT R Q Q

YAMAHA R Q Yamalube

OUT BOARD MOTOR

EVINRUDE R Johnson Outboard

JOHNSON R

MERCURY R Quick Silver

SUZUKI R Suzuki Outboard

YAMAHA R Yamalube

MOTO CROSS BIKES (TWO STROKE ENGINE)

KAWASAKI R Q

SUZUKI R Q Suzuki Motorcycle

YAMAHA R Q

R - Recommended Q - Qualified

LUBRICANTS®



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® XL-S Rev. Dec /13


DESCRIPTIONSONIC® XL-S is an advanced synthetic blend, low ash two-cycle engine oil. It is designed as a high-quality alternative to OEM branded products for a wide variety of recreational vehicles. SONIC® XL-S offers superior performance in high performance applications; including ORBITAL and FITCH engines. It is designed to exceed the performance requirements for API TC, SAE fluidity/miscibility grade 4, JASO (Japanese Automobile Standards Organization) FC Plus, ISO (International Standards Organization) L-EGD, and Husqvarna 242. It meets or exceeds the warranty requirements of original engine manufacturers requiring low ash engine oil.

SONIC® XL-S contains ZYVEC. ZYVEC is an additive that extends engine life by reducing piston scuffing, improves fuel system and combustion chamber cleanliness, protects against ring sticking and improves high temperature oil film performance.

APPLICATIONS / SPECSSONIC® XL-S is blended primarily for use in direct injection applications, but can also be used in tank mixes up to 100:1 (as specified by the OEM). This oil is suitable for use in both EFI (electronic fuel injection) and DFI (direct fuel injection) engines. It is recommended for the following two stroke applications:

• Snowmobiles (including racing machines)• Personal Watercrafts• High-impact Chainsaws• Motocross Bikes• All-Terrain Vehicles• Lawn mowers, string trimmer and other garden equipment

SONIC® XL-S is not recommended for use in water-cooled

two-cycle application requiring a NMMA TC-W3 product.

PERFORMANCE FEATURES:• Superior protection of Exhaust Power Valves • Low Smoke• Increased Engine Life• Emissions Reductions• Anti-scuff Performance• Ring Stick Protection• Improved Engine Cleanliness• Corrosion Protection• Superior Low Temperature Performance• Compatible with Fuels Containing Alcohol

CONTAINERS

1 L 5 L 20 L 205 L 1000 L

XL-S X X

SONIC® XL-SSYNTHETIC BLEND INJECTION AND SNOWMOBILE ENGINE OIL


SONIC® XL-S



Viscosity Index 168

Pour Point -63




ORIGINAL EQUIPMENT TWO CYCLE OIL COMPARISON CHART – SONIC XL-S

MANUFACTURER SONIC® XL-S SONIC®

TWO-CYCLESONIC®

DYNAMIX PLUS ARCTIC CAT BOMBARDIER POLARIS YAMAHA EVINRUDE JOHNSON MERCURY SUZUKI

SNOWMOBILE


SKI-DOO R Q Rotax

MOTOSKI R Q Rotax


YAMAHA R Q Yamalube

PERSONAL WATER CRAFT

ARTIC CAT R Q Tiger Shark

SEA-DOO R Q Rotax

BOMBARDIER R Q Rotax

KAWASAKI R Q


TIGER SHAW R Q Tiger Shark

WET JET R Q

WILD CAT R Q Q

YAMAHA R Q Yamalube

OUT BOARD MOTOR

EVINRUDE R Johnson Outboard

JOHNSON R

MERCURY R Quick Silver

SUZUKI R Suzuki Outboard

YAMAHA R Yamalube

MOTO CROSS BIKES (TWO-STROKE ENGINE)

KAWASAKI R Q

SUZUKI R Q Suzuki Motorcycle

YAMAHA R Q

R - Recommended Q - Qualified



DISPOSAL OF USED LUBRICANTS AND CONTAINERSPlease protect the environment when disposing of petroleum products. All products should be taken into an authorized collection facility or picked up by a qualified organization. This ensures the products will be disposed of in an environmentally sensitive manner. For additional information on used oil recycling programs please see: • Saskatchewan www.usedoilrecyclingsk.com • Alberta www.usedoilrecyclingab.com • British Columbia www.usedoilrecycling.com/en/bc • Manitoba www.usedoilrecycling.com/en/mb

®



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® 4-STROKE SL Rev. Dec /13


DESCRIPTIONSONIC® 4-STROKE SL is a premium full Synthetic 4-Stroke motor oil. It is designed specifically for Non-Automotive High Output / High RPM “power-sport” motors. SONIC® 4-Stroke SL combines a unique blend of fully synthetic Polyalphaolefin (PAO) base oils and industry leading additives. This combination ensures a superior level of protection in applications that can produce RPM levels near double that of their automotive counterparts.

APPLICATIONS / SPECSSONIC® 4-STROKE SL is engineered to withstand the punishment endured by high performance engines in:

• Snowmobiles • ATVs• Motorcycles • Outboard Motors

This product is also suitable for use in 4-Stroke snow blowers, generators, lawn mowers and garden tractors.

SONIC® 4-STROKE SL meets or exceeds OEM engine oil warranty requirements in applications calling for an:

• API SM / SL / SJ• JASO MA• NMMA FC-W / FC-W Catalyst Compatible

*This product does not contain friction modifiers. Most Non-Automotive / Power Sport applications require lubricants manufactured in this manner.

PERFORMANCE FEATURES• 100% Synthetic Formulation• API SM / SL / SJ• JASO MA (Non-Friction Modified) Applications• Wet Clutch compatible• Superior operating range -35°C to 35°C• Reduces engine wear without the need for Molybdenum

based Friction Modifiers• Utilizes Hyper ZDP technology to improve wear protection

and catalyst life• Improved engine cleanliness• Exceptional corrosion protection• Broad Application Range

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

5W-50 X


4 Stroke SL (5W-50)

Viscosity @ 40°C , cSt 99.8

Viscosity @ 100°C , cSt 16.5

Viscosity Index 175


Colour Blue

SONIC® 4-STROKE SL5W-50 SYNTHETIC POWER SPORT MOTOR OIL



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® BLUE GUARD Rev. Dec /13


DESCRIPTIONSONIC® BLUE GUARD is a premium-quality, multi-purpose NLGI #2, lithium complex grease. SONIC® Blue Guard has been designed to effectively lubricate both heavy and light-duty bearings operating at a variety of speeds.

SONIC® BLUE GUARD maintains an NLGI GC-LB certification allowing it to be used in a wide range of applications including but not limited to wheel bearings, universal joints, ball joints and chassis fittings.

APPLICATIONS / SPECS• NLGI #2• NLGI GC-LB

Meet manufacturer’s requirements pertaining to equipment found in the following industries:

• Agriculture, Construction• Fleet, Oil Field• Mining• Manufacturing

PERFORMANCE FEATURES• NLGI Classification GC-LB-Grade 2• This is the highest possible standard for multi-purpose

grease (see back page for classification breakdown)• Excellent resistance to water wash-off• High Dropping Point• Stays stable even at high temperatures• Extreme Pressure Additives• Ensures protection under heavy loads.• Compatible with most comparable grease

CONTAINERS

Grade40x400 g

Tubes17 kg Pails

55 kg Kegs

180 kg Drums

Blue Guard

X X X X


SONIC Blue Guard Grease

Thickener Type Lithium Complex

Colour Blue

NLGI Grade 2

Base Oil Viscosity @ 40°C , cSt 198

Base Oil Viscosity @ 100°C , cSt 16.7

Dropping Point 288°C (550°F)

Penetration Worked, 60 strokes Unworked

280275

Timken OK Load, Kg/lb 55/121

Four-Ball Weld Point, Kg 400

SONIC® BLUE GUARDMULTI-PURPOSE GREASE NLGI #2



PETROSPECS





LUBRICANTS

GREASE COMPATIBILITY: RELATIVE COMPATIBILITY CHART

Alu

min

um

C

om

ple

x

Bar

ium

C

om

ple

x

Cal

ciu

m

Ste

arat

e

Cal

ciu

m12

-Hyd

roxy

stea

rate

Cal

ciu

m

Co

mp

lex

Cal

ciu

m

Su

lfon

ate

Co

mp

lex

Cla

y

Lit

hiu

m

Ste

arat

e

Lit

hiu

m

12-H

ydro

xyst

eara

te

Lit

hiu

m

Co

mp

lex

Po

lyu

rea

Aluminum Complex X I I C I B I I I C C

Barium Complex I X I C I C I I I I B

Calcium Stearate I I X C I C C C B C C

Calcium 12-Hydroxystearate C C C X B B C C C C C

Calcium Complex I I I B X I I I I C C

Calcium Sulfonate Complex B C C B I X I B B C C

Clay I I C C I I X I I I B

Lithium Stearate I I C C I B I X C C C

Lithium 12-Hydroxystearate I I B C I B I C X C C

Lithium Complex C I C C C C I C C X C

Polyurea C B C C C C B C C C X

B = Borderline C = Compatible I = IncompatibleNote: Greases of different thickeners should always be considered incompatible and (whenever possible) the old product should be purged from the system before introducing a new product. This chart is an adaptation of the grease compatibility chart outlined by the National Lubricating Grease Institute (NLGI) and does not take into consideration the variety of specialty synthetic greases and is intended as a guide only.

NLGI GREASE PERFORMANCE CLASSIFICATIONS

Category Service Relubrication / Applications

LA – Chassis Mild Duty Frequent relubrication intervals (<3200 Km), Non-critical applications

LB – Chassis Mild to Severe-Duty Prolonged relubrication intervals (>3200 Km), high loads, vibration and exposure to water

GA – Wheel Bearings Mild Duty Frequent relubrication, Non-critical applications. Temperature range -20˚C to 70˚C

GB – Wheel Bearings Mild to Moderate-Duty Typical Urban and Highway service. Temperature range -40˚C to 120˚C with occasional spike to 160˚C

GC – Wheel Bearings Mild to Severe-DutyFrequent stop-and-go service, trailer hauling, mountain driving etc. Temperature range -20˚C to 70˚C with frequent spikes to 160˚C

and occasional spikes to 200˚C



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® SILVER GUARD SL Rev. Dec /13


DESCRIPTIONSONIC® SILVER GUARD SL is a premium-performance Synthetic Blend lithium-complex multipurpose grease. Its synthetic composition and unique additive package allow it to maintain superior performance and pumpability in both high and low-temperature applications.

SONIC® SILVER GUARD SL maintains an NLGI GC-LB certification allowing it to be used in a wide range of applications including but not limited to wheel bearings, universal joints, ball joints and chassis fittings.

APPLICATIONS / SPECS• NLGI #1.5• NLGI GC-LB

Meets manufacturer’s performance requirements pertaining to equipment found in the following industries:

• Agriculture• Construction• Fleet• Oil Field• Mining• Manufacturing

PERFORMANCE FEATURES• Extended lubrication intervals and reduced down time• Excellent rust and corrosion protection• Superior water washout protection• Meets EP (extreme pressure) rating

CONTAINERS

Grade10x400 g

Tubes55 kg Kegs

180 kg Drums

Silver Guard SL X X X


SONIC® Silver Guard SL Grease


Colour Amber

NLGI Grade 1.5





303308

Timken OK Load, kg/lb 55/121

Four-Ball Weld Point, kg 500

SONIC® SILVER GUARD SL SYNTHETIC BLEND MULTI-PURPOSE GREASE NLGI #1.5









Alu

min

um

C

om

ple

x

Bar

ium

C

om

ple

x

Cal

ciu

m

Ste

arat

e

Cal

ciu

m12

-Hyd

roxy

stea

rate

Cal

ciu

m

Co

mp

lex

Cal

ciu

m

Su

lfon

ate

Co

mp

lex

Cla

y

Lit

hiu

m

Ste

arat

e

Lit

hiu

m

12-H

ydro

xyst

eara

te

Lit

hiu

m

Co

mp

lex

Po

lyu

rea























Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® MOLY GUARD SL Rev. Dec /13


DESCRIPTIONSONIC® MOLY GUARD SL is a premium performance Synthetic Blend multipurpose grease infused with 3% Molybdenum Disulphide (Moly). Its synthetic composition and unique additive package allow it to maintain superior performance and pumpability in both high and low-temperature applications. The 3% Moly package enhances the greases resistance to shock loading and the effects of vibrations typically found in heavily loaded equipment.

SONIC® MOLY GUARD SL maintains an NLGI GC-LB certification allowing it to be used in a wide assortment of applications including but not limited to wheel bearings, universal joints, ball joints and chassis fittings.

APPLICATIONS / SPECS• NLGI #1.5• NLGI GC-LB

Manufacturer’s Requirements Pertaining to equipment found in the following industries:

• Agriculture• Construction• Fleet• Oil Field• Mining• Manufacturing

PERFORMANCE FEATURES• Extends lubrication intervals and reduces down time• Excellent rust and corrosion protection• Resists water washout protection• High heat resistance with a 290°C/550°F dropping point• Meets EP (extreme pressure) requirements to reduce wear• Superior low temperature pump-ability • Outstanding oxidation resistance• Approved for applications where 3% MOLY is required

CONTAINERS

Grade 10 x 400 g Tubes

17 kg Pails

55 kg Kegs

Moly Guard SL X X X


SONIC® Moly Guard SL Grease


Colour Black

NLGI Grade 1.5





303308

Timken OK Load, kg/lb 50/110

Four-Ball Weld Point, kg 500

SONIC® MOLY GUARD SLSYNTHETIC BLEND MULTI-PURPOSE GREASE NLGI #1.53% MOLYBDENUM DISULPHIDE



PETROSPECS





LUBRICANTS


Alu

min

um

C

om

ple

x

Bar

ium

C

om

ple

x

Cal

ciu

m

Ste

arat

e

Cal

ciu

m12

-Hyd

roxy

stea

rate

Cal

ciu

m

Co

mp

lex

Cal

ciu

m

Su

lfon

ate

Co

mp

lex

Cla

y

Lit

hiu

m

Ste

arat

e

Lit

hiu

m

12-H

ydro

xyst

eara

te

Lit

hiu

m

Co

mp

lex

Po

lyu

rea









Lithium 12-Hydroxysearte I I B C I B I C X C C






LA – Chassis Mild Duty Frequent relubrication intervals (<3200 km), Non-critical applications

LB – Chassis Mild to Severe-Duty Prolonged relubrication intervals (>3200 km), high loads, vibration and exposure to water







Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® FLOW-RITE GREASE Rev. Dec /13


DESCRIPTIONSONIC® FLOW-RITE GREASE is a line of premium lithium-based low temperature (NLGI #0) and Semi-Fluid (NLGI #00) greases.

SONIC® FLOW-RITE GREASE NLGI # 0 is a multi-purpose low temperature grease designed for both manual and automated greasing systems (where required by the manufacturer).

SONIC® FLOW-RITE GREASE NLGI #00 is a Semi-Fluid pourable grease typically consumed in centralized greasing systems on commercial equipment and in truck wheel assemblies (hubs).

APPLICATIONS / SPECSManufacturer’s Requirements Pertaining to:

• Low temperature multi-purpose applications (NLGI #0)• Various Automated chassis lubrication systems (i.e.

Highway Trucks, Street Sweepers, etc.)• Wheel Hubs• Various industrial automated lubrication systems

PERFORMANCE FEATURES• NLGI Consistency #0 and #00• Exceptional Water Wash-Off Resistance• Low temperature multi-purpose applications • Extreme-Pressure Additives ensures protection under

heavy loads

CONTAINERS

Grade 40 x 400 g Tubes 17 kgPails

Flow-Rite EP #0 X

Flow-Rite EP #00 X


SONIC Flow-Rite EP# 0 EP # 00

Thickener Type Lithium Lithium

Colour Amber Amber

NLGI Grade 0 00

Base Oil Viscosity @ 40°C , cSt 115 70.4

Base Oil Viscosity @ 100°C , cSt 10.6 7.8

Dropping Point 182°C (360°F) 182°C (360°F)


422365

360425

Timken OK Load, kg/lb 40 40

Four-Ball Weld Point, kg 250 250

SONIC® FLOW-RITE GREASENLGI # 0 & 00 GREASE









Alu

min

um

C

om

ple

x

Bar

ium

C

om

ple

x

Cal

ciu

m

Ste

arat

e

Cal

ciu

m12

-Hyd

roxy

stea

rate

Cal

ciu

m

Co

mp

lex

Cal

ciu

m

Su

lfon

ate

Co

mp

lex

Cla

y

Lit

hiu

m

Ste

arat

e

Lit

hiu

m

12-H

ydro

xyst

eara

te

Lit

hiu

m

Co

mp

lex

Po

lyu

rea























Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® GEAR BOX GREASE Rev. Dec /13


DESCRIPTIONSONIC® GEAR BOX GREASE is a premium-performance NLGI #000 Semi-Fluid lithium grease that is designed to protect critical components against rust, wear and oxidation. SONIC® Gear Box Grease is formulated to protect gearboxes and other applications that call for a NLGI #000 product.

SONIC® GEAR BOX GREASE assists in reducing lubricant consumption in enclosed gear-cases when seals fail to retain conventional fluids. These gear-cases can typically be found in irrigation equipment and in underground mining applications.

APPLICATIONS / SPECS• NLGI #000 Semi-Fluid Grease• Irrigation System Gear Boxes• Leaky speed Reducers• Chain Cases• Gear cases which have lost their ability to retain certain

gear fluids due to housings and/or seal issues

PERFORMANCE FEATURES• NLGI EP #000 Classification • Semi-Fluid Grease• Water Wash-Off Resistance• High-Dropping Point• Stays stable at high temperatures

CONTAINERS

Grade55 kg Keg

17 kg Pail

180 kgDrum

SONIC® Gear Box X


SONIC® Gearbox Grease

Thickener Type Lithium

Colour Red

NLGI Grade 000




Penetration: Worked, 60 strokes 455

SONIC® GEAR BOX GREASESEMI-FLUID EP GREASE NLGI # 000









Alu

min

um

C

om

ple

x

Bar

ium

C

om

ple

x

Cal

ciu

m

Ste

arat

e

Cal

ciu

m12

-Hyd

roxy

stea

rate

Cal

ciu

m

Co

mp

lex

Cal

ciu

m

Su

lfon

ate

Co

mp

lex

Cla

y

Lit

hiu

m

Ste

arat

e

Lit

hiu

m

12-H

ydro

xyst

eara

te

Lit

hiu

m

Co

mp

lex

Po

lyu

rea























Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® FOOD MACHINERY GREASE Rev. Dec /13


DESCRIPTIONSONIC® FOOD MACHINERY GREASE is a premium quality aluminum complex grease for use in the food processing industry where a NSF/USDA H-1 qualified product is required or preferred.

SONIC® FOOD MACHINERY GREASE is approved for use in food processing facilities where incidental food contact may occur as per the USDA H-1 requirements. The formulation provides excellent high temperature performance dropping point over (245°C/475°F) and oxidation stability. SONIC® FOOD MACHINERY GREASE is well suited for extreme pressure (EP) applications and those that demand high water washout / spray-off performance.

APPLICATIONS / SPECSSONIC® FOOD MACHINERY GREASE is recommended for use in food processing and packaging equipment that requires NSF/USDA H-1 qualified product.

• Feed Plants• Packaging & Bottling facilities• Multi-Purpose & General Greasing Applications

PERFORMANCE FEATURES• USDA H-1 authorization for incidental contact in the food

processing or packaging industry• Superior EP and anti-wear protection provides long

machinery life and reduces maintenance• Excellent dropping point and oxidation resistance provides

long lubricant life and stability at high temperatures• Selective formulation ensures a reduction in grease loss

due to water washout / spray-off conditions

CONTAINERS

Grade 40 x 400 g Tubes

Food Machinery Grease X


Food Machinery Grease

Thickener Type Aluminum Complex

Colour White

NLGI Grade 2

Texture Buttery

Base Oil Viscosity @ 40˚C 68

Dropping Point 245˚C (475˚F)

Penetration - Worked 280

Timken OK Load, Kg/lb 18/40

SONIC® FOOD MACHINERY GREASE NSF/USDA H-1 FOOD GRADE GREASE NLGI#2



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® CHAIN OIL Rev. Dec /13


DESCRIPTIONSONIC® CHAIN OILS are blended to produce a very tacky product that will adhere extremely well (reducing throw-off and dripping) to the guide bar and chain of power saws.

APPLICATIONS / SPECSSONIC® CHAIN OILS are recommended for use in the chain oil reservoir on a majority of modern chain saws. Their tacky nature and proprietary formulation protect the guide bar and chain from excessive wear.

SONIC® CHAIN OILS can also be used:• As a basic chain lubricant for applications that require

hand oiling.• Lubricating guide bars.

SONIC® CHAIN OILS are blended in three specific grades to cover all seasons:

• Light = Winter applications• Medium = Shoulder Season applications (Spring & Fall)• Heavy = Summer applications

PERFORMANCE FEATURES• Tackiness agents enable the oil to maintain a protective oil

film to lubricate the chain and bar• Anti-wear additives protect against premature wear of the

metal components• Anti-rust protection resists water corroding metal parts.• Provides good flow ability at all temperatures (three weights

are available)

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

Light X X X

Medium X

Heavy X X X


Light Medium Heavy

Viscosity @ 40°C , cSt 59 105 164

Viscosity @ 100°C , cSt 89.3 11.6 16.3


Pour Point (°C) -45 -27 -24

Colour Red Red Red

SONIC® CHAIN OILLIGHT, MEDIUM, HEAVY



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® SAWGUIDE OIL Rev. Dec /13


DESCRIPTIONSONIC® SAW GUIDE OIL uses a blend of carefully selected paraffinic base oils and performance additives to protect both modern and legacy multiblade gangsaws and edgers.

SONIC® SAW GUIDE OILS are fortified with tackifiers enabling them to adhere to critical components and form a friction reducing film between the blade and guide. This film resists water washoff and protects the equipment against abrassive environmental debris and reduces friction generated tempature increases.

SONIC® SAW GUIDE OIL is blended in 2 common grades (100 and 150).

For extreme heat or specialty applications, a custom heavy-grade can be produced. Please contact your local Co-op for additional information.

APPLICATIONS / SPECS• Gangsaws• Edgers• Trimmers• Older sawmill applications where circular saws are used• Small portable circular saws

PERFORMANCE FEATURES• Rust Protection – Rust and Corrosion inhibitors assist in

keeping blades cleaner and increasing their usable life• Reduces Pitch Build Up (wood resin) – Reducing wood

resin on the blades and guide aid in reducing wear and maintaining cooler operating temperatures, thus reducing overall wear

• Reduced Oil “Fling” – Tackifiers reduce the amount of oil throw off the blades generate, resulting in a cleaner, healthier environment

CONTAINERS

Grade 4x5 L 205 L 1000 L

100 X X X

150 X X X

175


ISO Viscosity Grade 100 150 *175

Kinematic Viscosity @ 40˚C , cSt 107.6 147.6 162.7

Kinematic Viscosity @ 100˚C , cSt 12.8 15.3 17.2


Pour Point, ˚C -30 -27 -30

Colour Blue Blue Blue

* Custom blend upon request

SONIC® SAW GUIDE OIL100, 150, 175*



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® LOCOMOTIVE ENGINE OIL Rev. Dec /13


DESCRIPTIONSONIC® LOCOMOTIVE ENGINE OIL (SAE 40) is a premium OEM approved formulation that has been designed to provide superior year-round lubrication in most high horsepower 2-Stroke and 4-Stroke locomotive engines. SONIC® Locomotive Engine Oil is based on zinc-free (ZF) technology and designed to meet and/or exceed all current (2008) GE and EMD requirements.

SONIC® LOCOMOTIVE ENGINE OILS are designed to be used with both Ultra Low Sulfur (ULSD) and Low Sulfur (LSD) diesel fuels and provide users with exceptional TBN retention.

APPLICATIONS / SPECS• Electro-Motive Diesel (EMD) Generation V• GE Generation 4 Long Life• ALCO

PERFORMANCE FEATURES• Superior TBN retention• OEM approved formulations• Exceeds all current (2008) GE & EMD requirements

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

SAE 40 X


SAE Grade SAE 40



Viscosity Index 105

Pour Point °C -24

Zinc <2

TBN 9

SONIC® LOCOMOTIVE ENGINE OILSAE 40



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® NATURAL GAS ENGINE OIL Rev. Dec /13


DESCRIPTIONSONIC® NATURAL GAS AND L.P. ENGINE OILS, are designed for most 4-Stroke and some 2-Stroke stationary Natural Gas engines requiring a low Ash formulation. SONIC® Natural Gas and L.P. engine Oils are formulated with high quality paraffinic base oils and advanced additive technology that provides exceptional engine protection. The carefully selected additive package delivers outstanding resistance to oxidation, nitration and the ill effects of high heat and extended operations.

Note: SONIC® Natural and L.P. Gas Engine Oil does not meet the specification for modern mobile gasoline engines that are converted to L.P. or Natural Gas fuel. For these engines, the owner manual should be consulted to ensure that qualified oils are used.

APPLICATIONS / SPECSSONIC® NATURAL GAS ENGINE OILS are recommended for use in Natural and/or L.P. Gas Engines requiring a low ash lubricant.

• Caterpillar G3000 series• Cummins (except CES 20074 spec)• Duetz MWM• Ingersoll-Rand• Waukesha• MAN

PERFORMANCE FEATURES• High oxidation stability prevents premature oil thickening • Reduces combustion chamber deposits• Excellent performance in Bearing Corrosion Tests• Technology has been field tested in thousands of stationary

Natural gas Engines

Specific application questions should be directed to an FCL Lubricant Product Co-ordinator or the technical services manager.

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

30 X X

40 X X


SAE Grade 30 40

Kinematic Viscosity @ 40°C , cSt 106 126

Kinematic Viscosity @ 100°C , cSt 11.6 13.3



SONIC® NATURAL (AND L.P.) GAS ENGINE OIL



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® HEAT TRANSFER FLUIDS Rev. Dec /13


DESCRIPTIONSONIC® HEAT TRANSFER FLUID is a high-quality line of mineral heat transfer oils designed for use in closed liquid phase heat transfer systems, requiring a non-corrosive fluid with high thermal efficiency. SONIC® Heat Transfer Fluids provide exceptional thermal efficiency and resist thickening due to oxidation which aide in allowing the system to maintain exceptional fluid heating and circulation.

APPLICATIONS / SPECSSONIC® HEAT TRANSFER FLUID is recommended for non-pressurized, closed liquid phase heating systems operating at a maximum bulk-fluid temperature of 320°C. These systems are typically found in the construction, asphalt, plastics, timber and metal industries.

PERFORMANCE FEATURES• Consistent high heat transfer performance over a wide

range of temperatures• Superb thermal stability provides a long service life and

minimal fluid make up• Excellent oxidation stability provides protection against

oxidation degradation caused by operating the system for extended periods at high temperatures

CONTAINERS

ISO VG 205 L 1000 L Bulk

32 X X X

36 X X X

46 X X X

68 X X X


ISO Viscosity Grade 32 36 46 68

Viscosity @ 40°C , cSt 32 36 46 63.5

Viscosity @ 100°C , cSt 5.4 6.2 7.0 8.5


Pour Point, °C -36 -42 -30 -30

Flash Point, °C - 230° - -

Auto Ignition, °C - 320° - 360° - -

SONIC® HEAT TRANSFER FLUIDS32, 36, 46, 68

ISO 36

Temp. (˚C/˚F) Thermal ConductivityW/m*K

Heat CapacityJ/(g˚C)

Vapour Pressuremm Hg

Densityd/mL

0/32 0.198 1.833 0.1 0.8634

20/68 0.192 1.901 7.2 0.8514

40/104 0.186 1.969 1.6 0.8394

100/212 0.168 2.173 9.9 0.8034

150/302 0.153 2.343 45.5 0.7734

200/392 0.138 2.513 107.0 0.7434

250/482 0.123 2.683 194.5 0.7134

300/572 0.108 2.853 308.1 0.6834

350/662 0.093 3.023 447.6 0.6534



PETROSPECS





LUBRICANTS

0˚C 150˚C 350˚C

0.2

0.1

0.0

W/m*K

Thermal Conductivity

0˚C 150˚C 350˚C

3.0

2.5

2.0

J/g˚C

Heat Capacity

0˚C 150˚C 350˚C

450

225

0.0

mm Hg

Vapour Pressure

0˚C 150˚C 350˚C

1.0

0.75

0.5

g/mL

Density



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® AR-DRILL OIL Rev. Dec /13


DESCRIPTIONSONIC® AR-DRILL OIL is an extreme pressure lubricant formulated to both cool and lubricate pneumatic tools such as Rock Drills and Jack Hammers. AR-Drill Oils contain extreme pressure (EP) and corrosion protection additives to ensure equipment protection. AR-Drill Oils are blended in two specific grades ISO 46 and ISO 100. Within the line, the most popular and diverse grade is the ISO 100.

APPLICATIONS / SPECSSONIC® AR-DRILL OIL is recommended for use by grade in a wide range of pneumatic equipment such as:

• Rock Drills• Jack Hammers• Drifters• Wagon Drills• Tampers• Impact Tools• Pavement Breakers

PERFORMANCE FEATURES• Meets the lubricant demands of pneumatic equipment

requiring extreme pressure protection• Extreme Pressure (EP) formulation helps prevent

premature damage / wear to harden steel parts• Protects internal parts from rust / corrosion during periods

of idle and cools air tool mechanisms during operation.• Meets the requirements of pneumatic equipment

manufacturers

CONTAINERS

Grade 20 L 205 L

ISO 46 X

ISO 100 X


ISO Viscosity Grade ISO 46 ISO 100

Kinematic Viscosity @ 40°C , cSt 49 104



Pour Point (°C) -45 -30

SONIC® AR-DRILL OILEP LUBRICANT FOR AIR OPERATED ROCK DRILLS AND TOOLS



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® TURBINE R&O OIL Rev. Dec /13


DESCRIPTIONSONIC® TURBINE R&O OIL is a premium Extreme Pressure (EP) based turbine lubricant that provides long service life by preventing the formation of acids, sludge and other deposits.

SONIC® TURBINE R&O OILS’ ash less / extreme pressure additive formulation prevents excessive wear from shock loads / overloading and provides exceptional scuffing protection for heavily loaded turbines.

SONIC® TURBINE R&O OIL has applications in a wide array of air and inert gas compressors. Always consult your manual for the correct viscosity grade.

• Rotary vane compressors• Screw compressors• Centrifugal compressors• Reciprocating compressors

APPLICATIONS / SPECSSONIC® TURBINE R&O OIL has been formulated to meet or exceed the requirements for turbine systems requiring:

• Siemens TLV901304• Alstom HTGD 90117• General Electric GEK-32568F• Solar ES 9-224• DIN 51515• MDT with load gears

PERFORMANCE FEATURES• Outstanding demulsibility • Ash less antiwear formulation• Strong EP formulation• Superior foam control• Excellent oxidation stability• Enhanced filterability in the presence of water• Outstanding corrosion protection (Iron & Copper)

CONTAINERS

ISO VG 4 x 5 L 20 L 205 L 1000 L

32 X XTYPICAL PROPERTIESThe values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification.

Parameter Typical Properties Test Method

Viscosity Index 115 ASTM D2270

Viscosity cSt @ 40°C 32 ASTM D445

Viscosity cSt @ 100°C 5.5 ASTM D445

Specific Gravity @ 15.6 °C 0.8502 ASTM D4052

Color L0.5 ASTM D1500

Flashpoint (°C ) 236 ASTM D92

Pour Point (°C ) -42 ASTM D5950

Total Acid Number (TAN) mg KOH/g 0.07 ASTM D974

Ash (% by Mass) <0.01 ASTM D482

Water separation property ml Oil / ml Water / ml Emulsion (minutes) 40-40-0 (15) ASTM D1401

Air release property @ 50°C 0.8 min ASTM D3427

Corrosive effect on copper (3hrs @ 100°C) 1-B ASTM D130

Corrosion Protection Properties in synthetic saltwater / Distilled Water Pass/Pass ASTM D665

Foam Tendency / Stability Seq I - Seq II -Seq III 0/0 - 0/0 - 0/0 ASTM D892

Load Carrying capacity (load stage) 11 ASTM D5182

Turbine Oil Oxidation hours >8,000 ASTM D943

Modified RBOT Fresh Oil Oil after thermal & oxidative stress Antioxidant retention

1182 minutes984 minutes

83%

ASTM D2272

SONIC® TURBINE R&O OILEXTREME PRESSURE R&O TURBINE OIL



PETROSPECS


ENVIRONMENTAL HEALTH & SAFETYProduct specific Material Safety Data Sheets (MSDS) can be obtained by contacting your local Retail Co-op, Federated Co-operatives Limited (see contact information below) or online at www.coopconnection.ca



LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® VACUUM PUMP OIL Rev. Dec /13


DESCRIPTIONSONIC® VACUUM PUMP OILS are premium-quality air vacuum pump fluids designed for use in modern piston, rotary and vane vacuum pumps handling air and other inert gases (nitrogen, hydrogen, carbon dioxide, etc.). SONIC® Vacuum Pump Oils should not be used with corrosive vapors such as sulphuric acid and hydrogen sulphide.

APPLICATIONS / SPECS• Piston, Rotary and Vane vacuum pumps

PERFORMANCE FEATURES• High oxidation stability to prevent oil thickening concerns• Antiwear properties prevent premature wear• Antifoam agents assist with continual vacuum pressure

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

32 X X

68 X X


ISO Viscosity Grade 32 68

Kinematic Viscosity @ 40°C , cSt 31.6 68




SONIC® VACUUM PUMP OIL32, 68



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® PROCESS OIL Rev. Dec /13


DESCRIPTIONSONIC® PROCESS OIL is a carefully selected cut of virgin paraffinic base oil free of any additives or heavy metals. They are typically used by industrial customers for a wide variety of applications including manufacturing and large system flushes.

SONIC® PROCESS OILS also has uses in select agricultural segment as a livestock oil. Note this is a refined paraffinic base oil and is intended for external use only; it should also be used sparingly on livestock.

APPLICATIONS / SPECS• Industrial settings for use in raw material manufacturing• Some agricultural settings • Flushing Fluid

When used as a flushing fluid SONIC® Process Oil will not remove baked-on carbon deposits nor will it remove heavy sludge. It is intended as a generic contaminant flush fluid that itself will have to be drained prior to system refill.

PERFORMANCE FEATURES• Light colored virgin paraffinic base oils• Free of additives & heavy metals• Will not harm oil sumps if all residue is not removed • Available in 2 common grade ISO VG 20, 28

CONTAINERS

Grade 12x1 L 4x5 L 20 L 205 L 1000 L

20 X X X

28 X


ISO Viscosity Grade 20 28





SONIC® PROCESS OILINDUSTRIAL PROCESS OIL ISO VG 20, 28



PETROSPECS





LUBRICANTS



Lubricants: Section 4 • Page 1 of 2 Petro Specs - SONIC® INDUSTRIAL FLUIDS / CUSTOM BLENDING Rev. Dec /13


DESCRIPTIONSONIC® INDUSTRIAL FLUIDS are non-common industrial lubricants manufactured and sold specifically to a select customer base. If you would like to know more about SONIC® Industrial Lubricants or have a custom blending question please contact a FCL Lubricant Product Co-ordinator for further assistance.

Please Note: SONIC® De-Dusting Oils are not common road dust suppressants and should not be marketed that way.


De-Dust Light De-Dust MediumCRC

CompressorSteam Cylinder

Kinematic Viscosity @ 40°C , cSt 106 126 103 272.9

Kinematic Viscosity @ 100°C , cSt 11.6 13.3 13.5 24.2


Pour Point °C -30 -27 -42 -33

SONIC® INDUSTRIAL FLUIDS / CUSTOM BLENDINGDE-DUSTING (LIGHT / MEDIUM), CRC COMPRESSOR FLUID, STEAM CYLINDER FLUID



PETROSPECS





LUBRICANTS



Lubricants - Product Data Sheets

Documents

Transcript of Lubricants - Product Data Sheets