LP A1 BASINÇ ŞALTERİ ENG - pnomek€¦ · Çalı Sanayi Bölgesi Kırmızı Cd. No:16 Nilüfer...
4
PNOMEK Safe pressure materials.. 1 LP A1 PRESSURE SWITCH LP A1 Pressure Switches are seable due to seng knob on the pressure unit. It has aluminium case It has sealing ring NBR equipment Long service life due to high-quality micro switch High vibraon, shock resistance The pressure switch has vercal stacking connecon holes for boom flange connecon. It has pressure seng scale to set conviniently. Hydraulics and Mobile Hydraulics Pneumacs Heavy-Duty machines Media; Compressed Air and liquids, gas Connecon Process Reproducibility Working Tempurature Vibraon Test ( DIN EN 60068-2-6:1996 ) Shock Test ( DIN EN 60068-2-27:1993 ) Working Cycle Viscosity Range : Boom Flange Connecon : Within %1 of set pressure : -20 °C...+110 °C : 20 g ( Test Time 30 min. ) : 30 g : 5 000 000 Cycles 2 : 10 - 800 mm /second These values are maximum values and they can not be used at the same me. When you need to use the pressure switch in agressive chemicals or fluids please contact with us. You must sct to rules of clearence standarts Hydraulic oils (fluids). Use filteraon to blocking system errors. It is effecve for long working life of pressure switches. Please avoid using out of indicated values to have a long service from pressure switch. www.pnomek.com.tr NOTES ENG LP A1 pressure switch opens or closes electrical circuit depending on pressure is dropping or rising. Working Pressure, 7 bar to 600 bar, can be set by pressure seng knop on the pressure switch. When you turn the seng knop to clockwise, pressure rises up. It works appropriately under shock and high pressures. The pressure is seable by pressure seng knop on the pressure switch. When customer system is working, pressure switch has seable speciality. An seng knob makes it interesngfor customer due to easy and convinient seng of pressure. LP A1 series pressure switches are employed wherever compressed air, fluids, gases are used and a precisely set hystherisis is needed. The pressure switch has vercal stacking connecon holes for boom flange connecon. It has mounng design for all axis'. They classified depending on pressure seng ranges.
Transcript of LP A1 BASINÇ ŞALTERİ ENG - pnomek€¦ · Çalı Sanayi Bölgesi Kırmızı Cd. No:16 Nilüfer...
PNOMEKSafe pressure materials..
1
LP A1PRESSURE SWITCH
LP A1 Pressure Switches are se�able due to se�ng knob on the pressure unit.
It has aluminium case
It has sealing ring NBR equipment
Long service life due to high-quality micro switch
High vibra�on, shock resistance
The pressure switch has ver�cal stacking connec�on holes for bo�om flange connec�on.
It has pressure se�ng scale to set conviniently.
Hydraulics and Mobile Hydraulics
Pneuma�cs
Heavy-Duty machines
Media; Compressed Air and liquids, gas
Connec�on Process
Reproducibility
Working Tempurature
Vibra�on Test ( DIN EN 60068-2-6:1996 )
Shock Test ( DIN EN 60068-2-27:1993 )
Working Cycle
Viscosity Range
: Bo�om Flange Connec�on
: Within %1 of set pressure
: -20 °C...+110 °C
: 20 g ( Test Time 30 min. )
: 30 g
: 5 000 000 Cycles2: 10 - 800 mm /second
These values are maximum values and they can not be used at the same �me.When you need to use the pressure switch in agressive chemicals or fluids please contact with us. You must s�ct to rules of clearence standarts Hydraulic oils (fluids). Use filtera�on to blockingsystem errors. It is effec�ve for long working life of pressure switches. Please avoid using out of indicated values to have a long service from pressure switch.
www.pnomek.com.tr
NOTES
ENG
LP A1 pressure switch opens or closes electrical circuit depending on pressure is dropping or rising. Working Pressure, 7 bar to 600 bar, can be set by
pressure se�ng knop on the pressure switch. When you turn the se�ng knop to clockwise, pressure rises up. It works appropriately under shock and
high pressures. The pressure is se�able by pressure se�ng knop on the pressure switch. When customer system is working, pressure switch has se�able
speciality. An se�ng knob makes it interes�ngfor customer due to easy and convinient se�ng of pressure. LP A1 series pressure switches are employed
wherever compressed air, fluids, gases are used and a precisely set hystherisis is needed. The pressure switch has ver�cal stacking connec�on holes for
bo�om flange connec�on. It has moun�ng design for all axis'. They classified depending on pressure se�ng ranges.
ORDER CODE
PNOMEKSafe pressure materials..
www.pnomek.com.tr2 2
PRODUCT PRODUCT CODECONNECTION
TYPE
LP A1
LP A1 070
LP A1 160
LP A1 300
LP A1 400
LP A1 600
7 ... 70 bar
20 ... 160 bar
20 ... 300 bar
20 ... 400 bar
50 ... 600 bar
NA / NC
PRESSURE RANGEMAXİMUM SYSTEM
PRESSURE
ELECTRICAL CONNECTION TYPE
BOTTOM FLANGE CONNECTION
P
12
3
Contact connec�on schema:
1: COM
2: NC
3: NA
Switch func�on :
Terminal 1 - 3: When pressure rises, pressure switch has current ( NA )•
Terminal 1 - 2: When pressure rises or it has not any pressure, pressure switch has current ( NC )•
DIN 43650
ELECTRICAL CONNECTION FEATURES
ENG
LP A1PRESSURE SWITCH
650 bar
650 bar
650 bar
650 bar
750 bar
PRESSURE DIFFERENTIAL DIFFERENCE GRAPHIC
PNOMEKSafe pressure materials..
www.pnomek.com.tr2 3
ENG
Pressure Se�ng Range7 ... 70 bar max set pressure 70 bar max system pressure 650 bar
Pressure Se�ng Range20 ... 160 bar max set pressure 160 bar max system pressure 650 bar
Pressure Se�ng Range20 ... 400 bar max set pressure 400 bar max system pressure 650 bar
Pressure Se�ng Range50 ... 600 bar max set pressure 600 bar max system pressure 750 bar
Working Pressure ( bar )
His
tere
siz
(bar
)H
iste
resi
z (b
ar)
His
tere
siz
(bar
)
His
tere
siz
(bar
)H
iste
resi
z (b
ar) Working Pressure ( bar )
Pressure Se�ng Range20 ... 300 bar max set pressure 300 bar max system pressure 650 bar
Working Pressure ( bar ) Working Pressure ( bar )
Working Pressure ( bar )
LP A1PRESSURE SWITCH
PNOMEKSafe pressure materials..
www.pnomek.com.tr2 4
PNOMEKSafe pressure materials.. PNOMEK Hid. Pno. Mak. Kont. Cihazları San. Tic. Ltd. Ş�.
Çalı Sanayi Bölgesi Kırmızı Cd. No:16 Nilüfer -BURSA / TÜRKİYE [email protected]
T. : +90 (224) 251 63 45 F. : +90 (224) 251 63 46
ENG
LP A1PRESSURE SWITCH
m
ax
14
0
71
34,50
9
M5 x 80 mm ScrewM5 x 80 mm Screw
Pressure Setting Knob
Pressure Setting Scale
Product description tag
DIN43650 Base
DIN43650 Socket
76,50
40
5,50
31
31
8
8x2 O-RING
Connecon Dimensions
Note: M5 X 80 Hexagon head bolt screw
is gave with LP A1 series bo�om flange
type pressure switch.
