Load Verification Package

5
Sensor Solution Source Load · Torque · Pressure · Multi-Axis · Calibration · Instruments · Software www.futek.com APPLICATIONS Machine Press Arbor Press ADVANTAGES Extends Equipment Life Expectancy Enhances Productivity Clean Setup Easy Connection Plug & Play System Portability & Mobility IHH500 CAPABILITIES Bridge Resistance Measurement 21k Data Points Track/Hold Keypad Peak/Valley Keypad Tare/Gross Keypad Reset Keypad Shunt Keypad User Friendly Navigation Menu MODEL IHH500 Load Verification Package The load verification package is an essential tool to help optimize machine performance and decrease defectives in production by providing an accurate load verification system. The IHH500 provides the end to time consuming wiring guides, countless stray wires, and noisy amplifiers. The IHH500 comes with a cable for sensor mating cable, a USB cable, and a charging cable. This results in data acquisitions on field and data analysis back at the lab. Provides a ready to go system with a prewired, five point system calibration enabled solution to ease setup and disregard messy wiring. By attaching the USB cable and plugging it in a computer, the IHH500 can also pair with the SENSIT software’s remote control feature, allowing the to control the device remotely. Display Features Power Connector USB Connector (Compatible with USB 2.0 Only) Output Connector Sensor Connector 16×4 Character LCD Active Channel Number Peak Value Tracking Valley Value Sampling Rate Battery Indicator Larger Font Display Options Peak/Valley Reset Shunt Calibration Verification Power Key 1 9 2 10 3 11 4 12 5 6 13 7 14 8 15 IHH500 Battery Enter Exit Shunt Power Display Back Tare Gross Reset Track Hold Unit Menu 1 5 11 12 13 14 15 2 3 4 +2.00001 Peak +2.00000 mV/V +1.99999 Valley 01 Gross 5 SPS 8 9 10 7 6

Transcript of Load Verification Package

Page 1: Load Verification Package

Sensor Solution SourceLoad · Torque · Pressure · Multi-Axis · Calibration · Instruments · Software

www.futek.com

APPLICATIONS• Machine Press

• Arbor Press

ADVANTAGES• Extends Equipment Life Expectancy

• Enhances Productivity

• Clean Setup

• Easy Connection

• Plug & Play System

• Portability & Mobility

IHH500 CAPABILITIES

• Bridge Resistance Measurement

• 21k Data Points

• Track/Hold Keypad

• Peak/Valley Keypad

• Tare/Gross Keypad

• Reset Keypad

• Shunt Keypad

• User Friendly Navigation Menu

MODEL IHH500

Load Verification Package

The load verification package is an essential tool to help optimize machine performance and decrease defectives in production by providing an accurate load verification system.

The IHH500 provides the end to time consuming wiring guides, countless stray wires, and noisy amplifiers. The IHH500 comes with a cable for sensor mating cable, a USB cable, and a charging cable. This results in data acquisitions on field and data analysis back at the lab.

Provides a ready to go system with a prewired, five point system calibration enabled solution to ease setup and disregard messy wiring. By attaching the USB cable and plugging it in a computer, the IHH500 can also pair with the SENSIT software’s remote control feature, allowing the to control the device remotely.

Display Features

Power Connector

USB Connector (Compatible with USB 2.0 Only)

Output Connector

Sensor Connector

16×4 Character LCD

Active Channel Number

Peak Value

Tracking

Valley Value

Sampling Rate

Battery Indicator

Larger Font Display Options

Peak/Valley Reset

Shunt Calibration Verification

Power Key

1 9

2 10

311

412

5

6

13

7

14

815

IHH500

BatteryEnter

ExitShunt Power

DisplayBackTare

Gross

Reset

TrackHold

UnitMenu

1

5

11 12

13

1415

2 3 4

+2.00001 Peak+2.00000 mV/V+1.99999 Valley01 Gross 5 SPS

8

9

10

7

6

Page 2: Load Verification Package

Load Verification Package 2

1. Load must be in line and centered

2. Support surfaces must be flat and inline

3. Support on the outer ring only

90°

LLB Additional Information

Page 3: Load Verification Package

Load Verification Package 3

Further Mounting Suggestions

1. Secure from outer lip

2. Mount using thread holes from the bottom up

3. Retain with set screw, hand tighten to prevent overloading the sensor

4. Mount in counterbore hole. It is recommended to allow for +0.005" to the upper tolerance for outer diameter for any sensor expansion while under load.

Page 4: Load Verification Package

Load Verification Package 4

The included SENSIT software serves as an ideal data acqui-sitioning solution for load verification. A software that col-lects, graphs and interprets your data. The SENSIT software expands the capabilities of a traditional sensor platform into an ultimate test measurement solution.

SENSIT DATA ACQUISITION METHODS• The SENSIT software provides a Live Graphing mode and a Data

Logging mode.

• The Live Graphing mode is used to obtain a real-time graph of the data collected.

█ Peak Value

█ Tracking Value

█ Valley Value

Page 5: Load Verification Package

FUTEK® Advanced Sensor Technology, Inc.10 Thomas, Irvine, CA 92618 USATel: (949) 465-0900

www.futek.com

Drawing Number: AP1086

FUTEK reserves the right to modify its design and specifications without notice. Please visit https://www.futek.com/salesterms for complete terms and conditions. Copyright © 2021. All rights reserved.

Items Included in the Package

System Calibrated LLB Sensor IHH500 Pro

Licensed SENSIT Software IHH500 USB Cable IHH500 Power Supply Adaptor

IHH500 Support Bracket IHH500 Analog/ Relay Output Cable Pelican Case

Load Verification Package 5