LIST PRICE SHEET - Seachrome...CAL Series - Medicine Cabinets & Mirrors 33 Terms and Conditions 34...

Signature Series - Grab Bar Flange Diagrams 2Signature Series - Value Line Stainless Steel Grab Bars 3Signature Series - Satin Stainless - Domestic Grab Bars 4 - 6Signature Series - Decorative Finishes Stainless - Domestic Grab Bars 7Signature Series - Polished Brass - Powder Coated Domestic Grab Bars 8Signature Series - Custom Grab Bars 8Signature Series - Institutional Ligature Resistant Grab Bars 9Signature Series - Copper Alloy Grab Bars with CuVerro® surfaces 9Signature Series - Shower Rods, Flanges, Curtains & Rings 10Signature Series - ADA Reversible Shower Transfer Seats 11Signature Series - Accessibility Seats 12 - 15Lifestyle & Wellness® Series - Grab Bars 16 - 17Lifestyle & Wellness® Series - Silhouette Shower Seat 18Lifestyle & Wellness® Series - Seats / Corner Shower Shelves 19Coronado Series Grab Bars - Platinum Series Grab Bars 20 - 21Bath Accessories - 700 Series - Coronado 22 - 23Bath Accessories - 711 Series - Coronado 24Bath Accessories - 740 Series - Coronado 25Bath Accessories - 300 Series / Americana - 5000 Series / Contemporary 26Bath Accessories - 900 Series / Economy 27Bath Accessories - 15000 Series Stainless 28CAL Series - Commercial Accessory Line - Washroom 29CAL Series - Commercial Accessory Line - Hospitality 30 - 32CAL Series - Medicine Cabinets & Mirrors 33Terms and Conditions 34

TABLE OF CONTENTS

1906 East Dominguez Street, Long Beach, CA 90810Phone: 310-427-8010 / 800-955-2476

Fax: 310-427-8005 / 800-444-3380www.seachrome.com

MARCH 2018

LIST PRICE SHEET

PHONE: 800-955-2476 WWW.SEACHROME.COM FAX: 800-444-3380 PHONE: 800-955-2476 WWW.SEACHROME.COM FAX: 800-444-3380

2

PHONE: 800-955-2476 WWW.SEACHROME.COM FAX: 800-444-3380

CR EW

BAR DIAMETERS

"GS" Satin #304 Stainless Steel "H" 1-1/2" diameter x .049" (18 gauge)"Q" 1-1/4" diameter x .049" (18 gauge)

"GX" Polished #304 Stainless Steel

"GY" Peened with Satin Ends #304 Stainless Steel

"GZ" Peened with Polished Ends #304 Stainless Steel

"GB" Polished #260 Solid BrassTO ORDER - SPECIFY "GP" Powder Coated #304 Stainless Steel Example Series Dimension Flange

GST-240360-HCR2 = GS + T + 240360 + H + CR2 Configuration Bar Diameter

ALL "EW" & "CR" FLANGE, STAINLESS BARS MEET FEDERAL SPECIFICATION WW-P-541/8b, AMENDMENT 1, 16 APRIL 1990; ANSI 117.1, AND ALL A.D.A. (Americans with Disabilities Act) CODE REQUIREMENTS.

THESE BARS, WHEN PROPERLY INSTALLED, MEET THE DOWNWARD PULL REQUIREMENT FOR FEDERAL SPECIFICATION WORK, F.H.A., V.A., HOSPITAL CODES AND PRIVATE CONSTRUCTION.

FLANGE CONFIGURATIONS

MATERIAL & FINISH SERIES

STANDARD WALL CLEARANCE

EXPOSED SCREW FLANGESCONCEALED SCREW FLANGES

SEACHROME SPECIALIZES IN CUSTOM SIZES AND CONFIGURATIONS** CALL FOR TECHNICAL ASSISTANCE & COMPETITIVE PRICE QUOTES **

ROPE "2" RIDGE "3" STEP "4" BAND "5"

DECORATIVE CONCEALED FLANGE COVERSAdd $5.00 List per flange

SIGNATURE SERIES GRAB BARS MADE IN THE USA

Seachrome includes 6 - #10-2 ½” Stainless Steel Phillips Head mounting screws packaged with each grab bar.


SATIN STAINLESS / "IGSS" Series SATIN STAINLESS / "IGSS" Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGSS-120-QCR 12" 21.50 IGSS-120-HCR 12" 23.85IGSS-160-QCR 16" 22.15 IGSS-160-HCR 16" 25.00IGSS-180-QCR 18" 24.25 IGSS-180-HCR 18" 25.60IGSS-240-QCR 24" 25.90 IGSS-240-HCR 24" 29.10IGSS-300-QCR 30" 28.00 IGSS-300-HCR 30" 31.30IGSS-320-QCR 32" 29.60 IGSS-320-HCR 32" 33.35IGSS-360-QCR 36" 30.95 IGSS-360-HCR 36" 35.80IGSS-420-QCR 42" 35.90 IGSS-420-HCR 42" 38.35IGSS-480-QCR 48" 39.80 IGSS-480-HCR 48" 43.80

POLISHED STAINLESS / "IGXS" Series POLISHED STAINLESS / "IGXS' Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGXS-120-QCR 12" 31.20 IGXS-120-HCR 12" 33.05IGXS-160-QCR 16" 35.20 IGXS-160-HCR 16" 35.35IGXS-180-QCR 18" 36.25 IGXS-180-HCR 18" 36.55IGXS-240-QCR 24" 37.75 IGXS-240-HCR 24" 40.40IGXS-300-QCR 30" 42.25 IGXS-300-HCR 30" 45.35IGXS-320-QCR 32" 43.05 IGXS-320-HCR 32" 46.40IGXS-360-QCR 36" 45.75 IGXS-360-HCR 36" 49.35IGXS-420-QCR 42" 49.30 IGXS-420-HCR 42" 53.35IGXS-480-QCR 48" 52.60 IGXS-480-HCR 48" 57.20

PEENED with SATIN ENDS / "IGYS" Series PEENED with SATIN ENDS / "IGYS" Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGYS-120-QCR 12" 27.60 IGYS-120-HCR 12" 29.90IGYS-160-QCR 16" 29.95 IGYS-160-HCR 16" 31.95IGYS-180-QCR 18" 31.30 IGYS-180-HCR 18" 32.80IGYS-240-QCR 24" 31.95 IGYS-240-HCR 24" 37.35IGYS-300-QCR 30" 39.25 IGYS-300-HCR 30" 41.05IGYS-320-QCR 32" 40.50 IGYS-320-HCR 32" 42.55IGYS-360-QCR 36" 43.10 IGYS-360-HCR 36" 45.20IGYS-420-QCR 42" 43.95 IGYS-420-HCR 42" 47.40IGYS-480-QCR 48" 47.15 IGYS-480-HCR 48" 51.65

PEENED with POLISHED ENDS / "IGZS" Series PEENED with POLISHED ENDS / "IGZS" Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGZS-120-QCR 12" 34.00 IGZS-120-HCR 12" 35.75IGZS-160-QCR 16" 36.15 IGZS-160-HCR 16" 38.25IGZS-180-QCR 18" 37.15 IGZS-180-HCR 18" 39.45IGZS-240-QCR 24" 40.95 IGZS-240-HCR 24" 43.75IGZS-300-QCR 30" 45.60 IGZS-300-HCR 30" 49.05IGZS-320-QCR 32" 46.65 IGZS-320-HCR 32" 50.40IGZS-360-QCR 36" 49.35 IGZS-360-HCR 36" 56.70IGZS-420-QCR 42" 56.70 IGZS-420-HCR 42" 60.95IGZS-480-QCR 48" 61.35 IGZS-480-HCR 48" 66.65

VALUE LINE STAINLESS STEEL GRAB BARS

Fabricated using #304 Stainless Steel with concealed flanges, our VALUE LINE SERIES satisfies ADA Guidelines and Federal Specification WW-P-541/8b.

Our VALUE LINE SERIES of Grab Bars will satisfy every ADA project and budget.

SIGNATURE SERIES - VALUE LINE - STAINLESS STEEL GRAB BARS


3


SATIN STAINLESS / "IGSS" Series SATIN STAINLESS / "IGSS" Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGSS-120-QCR 12" 21.50 IGSS-120-HCR 12" 23.85IGSS-160-QCR 16" 22.15 IGSS-160-HCR 16" 25.00IGSS-180-QCR 18" 24.25 IGSS-180-HCR 18" 25.60IGSS-240-QCR 24" 25.90 IGSS-240-HCR 24" 29.10IGSS-300-QCR 30" 28.00 IGSS-300-HCR 30" 31.30IGSS-320-QCR 32" 29.60 IGSS-320-HCR 32" 33.35IGSS-360-QCR 36" 30.95 IGSS-360-HCR 36" 35.80IGSS-420-QCR 42" 35.90 IGSS-420-HCR 42" 38.35IGSS-480-QCR 48" 39.80 IGSS-480-HCR 48" 43.80

POLISHED STAINLESS / "IGXS" Series POLISHED STAINLESS / "IGXS' Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGXS-120-QCR 12" 31.20 IGXS-120-HCR 12" 33.05IGXS-160-QCR 16" 35.20 IGXS-160-HCR 16" 35.35IGXS-180-QCR 18" 36.25 IGXS-180-HCR 18" 36.55IGXS-240-QCR 24" 37.75 IGXS-240-HCR 24" 40.40IGXS-300-QCR 30" 42.25 IGXS-300-HCR 30" 45.35IGXS-320-QCR 32" 43.05 IGXS-320-HCR 32" 46.40IGXS-360-QCR 36" 45.75 IGXS-360-HCR 36" 49.35IGXS-420-QCR 42" 49.30 IGXS-420-HCR 42" 53.35IGXS-480-QCR 48" 52.60 IGXS-480-HCR 48" 57.20

PEENED with SATIN ENDS / "IGYS" Series PEENED with SATIN ENDS / "IGYS" Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGYS-120-QCR 12" 27.60 IGYS-120-HCR 12" 29.90IGYS-160-QCR 16" 29.95 IGYS-160-HCR 16" 31.95IGYS-180-QCR 18" 31.30 IGYS-180-HCR 18" 32.80IGYS-240-QCR 24" 31.95 IGYS-240-HCR 24" 37.35IGYS-300-QCR 30" 39.25 IGYS-300-HCR 30" 41.05IGYS-320-QCR 32" 40.50 IGYS-320-HCR 32" 42.55IGYS-360-QCR 36" 43.10 IGYS-360-HCR 36" 45.20IGYS-420-QCR 42" 43.95 IGYS-420-HCR 42" 47.40IGYS-480-QCR 48" 47.15 IGYS-480-HCR 48" 51.65

PEENED with POLISHED ENDS / "IGZS" Series PEENED with POLISHED ENDS / "IGZS" Series"Q" 1-1/4" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

Item # Size List Item # Size ListIGZS-120-QCR 12" 34.00 IGZS-120-HCR 12" 35.75IGZS-160-QCR 16" 36.15 IGZS-160-HCR 16" 38.25IGZS-180-QCR 18" 37.15 IGZS-180-HCR 18" 39.45IGZS-240-QCR 24" 40.95 IGZS-240-HCR 24" 43.75IGZS-300-QCR 30" 45.60 IGZS-300-HCR 30" 49.05IGZS-320-QCR 32" 46.65 IGZS-320-HCR 32" 50.40IGZS-360-QCR 36" 49.35 IGZS-360-HCR 36" 56.70IGZS-420-QCR 42" 56.70 IGZS-420-HCR 42" 60.95IGZS-480-QCR 48" 61.35 IGZS-480-HCR 48" 66.65

VALUE LINE STAINLESS STEEL GRAB BARS

Fabricated using #304 Stainless Steel with concealed flanges, our VALUE LINE SERIES satisfies ADA Guidelines and Federal Specification WW-P-541/8b.

Our VALUE LINE SERIES of Grab Bars will satisfy every ADA project and budget.

SIGNATURE SERIES - VALUE LINE - STAINLESS STEEL GRAB BARS


4


"S" STRAIGHT BARSItem # Length QEW HEW QCR HCR

GSS-120 12" 37.31 40.82 37.96 41.58GSS-160 16" 39.31 41.53 40.01 42.23GSS-180 18" 40.72 43.20 41.58 43.90GSS-240 24" 43.90 48.87 44.71 49.79GSS-300 30" 47.74 51.52 48.82 52.54GSS-320 32" 50.49 54.54 51.52 55.62GSS-360 36" 52.27 57.51 53.24 58.64GSS-420 42" 56.48 60.26 57.51 60.26GSS-480 48" 58.97 64.91 60.05 66.10

"M" STRAIGHT BARS WITH CENTER POST (GSM & GSM1)Item # Length QEW HEW QCR HCR

GSM-360 36" 79.10 86.40 79.10 86.40GSM-420 42" 92.20 95.95 92.20 95.95GSM-480 48" 95.80 103.95 95.80 103.95GSM-520 52" 99.30 108.75 99.30 108.75GSM-540 54" 101.90 110.60 101.90 110.60GSM-600 60" 106.00 116.45 106.00 116.45

"T" TUB & SHOWER BARS (REVERSIBLE)Item # Length QEW HEW QCR HCR

GST-160160 16"x16" 115.85 136.70 115.85 136.70GST-160320 16"x32" 122.40 140.85 122.40 140.85GST-240240 24"x24" 122.40 140.85 122.40 140.85GST-200400 20"x40" 134.85 159.75 134.85 159.75GST-240360 24"x36" 134.85 159.75 134.85 159.75GST-240480 24"x48" 149.15 172.60 149.15 172.60GST-300300 30"x30" 134.85 159.75 134.85 159.75GST-360360 36"x36" 149.15 172.60 149.15 172.60GST-360480 36"x48" 162.80 183.85 162.80 183.85GST-360540 36"x54" 169.45 189.60 169.45 189.60

"2 WAY" TUB / SHOWER BAR *(DESIGNATE LH or RH)Item # Length QEW HEW QCR HCR

GSTW*(L/R)-360240 36"x24"x24" 307.45 322.40 307.45 322.40GSTW*(L/R)-480240 48"x24"x24" 337.75 352.60 337.75 352.60GSTW*(L/R)-540240 54"x24"x24" 353.65 369.05 353.65 369.05

GSS

GSM1

GSM

GSTW* (L/R)

RH ShownLH Shown

GST

SIGNATURE SERIES - SATIN STAINLESS - DOMESTIC GRAB BARS MADE IN THE USA


5


"V" VERTICAL ANGLE BARS *(DESIGNATE LH or RH)Item # Length QEW HEW QCR HCR

GSV* (L/R)-160160 16"x16" 115.85 136.70 115.85 136.70GSV*(L/R)-200200 20"x20" 118.05 139.00 118.05 139.00GSV*(L/R)-240240 24"x24" 122.40 140.85 122.40 140.85GSV*(L/R)-300300 30"x30" 134.85 159.75 134.85 159.75GSV*(L/R)-160320 16"x32" 122.40 140.85 122.40 140.85

"U" U-SHAPED SHOWER BARSItem # Length QEW HEW QCR HCR

GSU-300360 30"x36"x30" 294.95 310.65 294.95 310.65GSU-300480 30"x48"x30" 310.65 324.40 310.65 324.40GSU-300540 30"x54"x30" 324.45 340.15 324.45 340.15GSU-300600 30"x60"x30" 343.95 359.90 343.95 359.90

"D" DRINKING FOUNTAIN BARItem # Length QEW HEW QCR HCR

GSD-330180 33"x18" 172.25 184.50 172.25 184.50

"W" WALL-TO-FLOOR BARItem # Length QEW HEW QCR HCR

GSW-330300 33"x30" 133.60 157.20 133.60 157.20

"WL" (LH) or "WR" (RH) WALL-TO-FLOOR BARS with Side LegItem # Length QEW HEW QCR HCR

GSWL-330300 33"x30" 222.10 246.25 222.10 246.25GSWR-330300 33"x30" 222.10 246.25 222.10 246.25

AVAILABLE WITH or WITHOUT BELOW - GROUND EXTENSION (SHOWN WITHOUT)

AVAILABLE WITH or WITHOUT BELOW - GROUND EXTENSION (SHOWN WITHOUT)

GSW-330300

GSWR-330300

GSWL-330300

GSD-330180

GSU

RH ShownLH Shown

GSV* (L/R)



6


BOOMERANGItem # Length QEW HEW QCR HCR

GSB-120120 12"x12" 75.35 82.25 75.35 82.25

WALL TO WALL STRADDLEItem # Length QEW HEW QCR HCR

GSWW-240240 24"x24" 380.30 397.30 380.30 397.30

FLOOR TO FLOOR STRADDLEItem # Length QEW HEW QCR HCR

GSFS-330300 33"x30" 527.80 551.40 527.85 551.40

IMPORT SWING-UP GRAB BAR - 30" OVERALLItem # Length

IGW-4130 30" X 9.5"

WINGIT FASTENERSSCW-RESGBW35SCW-GBW40

GRAB BARS: ADDITIONAL ITEMS LIST PRICESCW-RESGBW35 GRAB BAR WINGIT FASTENER

COMMERCIAL STANDARD GRAB BAR WINGIT FASTENER$25.75 PAIR

SCW-GBW40 $59.00 EACHSIDE LEG SUPPORT $75.00 EACHQCR/HCR WALL MOUNT SUPPORT - GRAB BARS $55.00 EACHSTAINLESS STEEL WELDED END CAPS $32.00 EACH

Q-SS

145.00

SCW-RESGBW35 SCW-GBW40

GSB-120120

GSWW-240240

GSFS-330300

IGW-4130-Q-SS



7


SIGNATURE SERIES - DECORATIVE FINISHES STAINLESS - DOMESTIC GRAB BARS MADE IN THE USA

Item # Size List Item # Size List Item # Size List

GXS-120-QCR 12" 52.75 GYS-120-QCR 12" 40.30 GZS-120-QCR 12" 46.25GXS-160-QCR 16" 60.15 GYS-160-QCR 16" 44.70 GZS-160-QCR 16" 50.55GXS-180-QCR 18" 64.40 GYS-180-QCR 18" 47.20 GZS-180-QCR 18" 53.70GXS-240-QCR 24" 75.90 GYS-240-QCR 24" 53.70 GZS-240-QCR 24" 59.60GXS-300-QCR 30" 87.80 GYS-300-QCR 30" 61.00 GZS-300-QCR 30" 67.40GXS-320-QCR 32" 93.30 GYS-320-QCR 32" 64.60 GZS-320-QCR 32" 70.45GXS-360-QCR 36" 100.50 GYS-360-QCR 36" 68.60 GZS-360-QCR 36" 74.45GXS-420-QCR 42" 112.80 GYS-420-QCR 42" 76.00 GZS-420-QCR 42" 81.35GXS-480-QCR 48" 123.60 GYS-480-QCR 48" 82.05 GZS-480-QCR 48" 86.80

GXT-160160-QCR 16"x16" 149.25 GYT-160160-QCR 16"x16" 122.70 GZT-160160-QCR 16"x16" 134.00GXT-160320-QCR 16"x32" 173.50 GYT-160320-QCR 16"x32" 136.40 GZT-160320-QCR 16"x32" 153.30GXT-240240-QCR 24"x24" 173.50 GYT-240240-QCR 24"x24" 136.40 GZT-240240-QCR 24"x24" 153.30GXT-200400-QCR 20"x40" 202.45 GYT-200400-QCR 20"x40" 156.60 GZT-200400-QCR 20"x40" 177.70GXT-240360-QCR 24"x36" 202.45 GYT-240360-QCR 24"x36" 156.60 GZT-240360-QCR 24"x36" 177.70GXT-240480-QCR 24"x48" 229.60 GYT-240480-QCR 24"x48" 175.45 GZT-240480-QCR 24"x48" 200.90GXT-300300-QCR 30"x30" 202.45 GYT-300300-QCR 30"x30" 156.60 GZT-300300-QCR 30"x30" 177.70GXT-360360-QCR 36"x36" 229.60 GYT-360360-QCR 36"x36" 175.45 GZT-360360-QCR 36"x36" 200.90GXT-360480-QCR 36"x48" 259.35 GYT-360480-QCR 36"x48" 196.00 GZT-360480-QCR 36"x48" 225.40GXT-360540-QCR 36"x54" 272.70 GYT-360540-QCR 36"x54" 205.70 GZT-360540-QCR 36"x54" 237.25

GXV*-160160-QCR 16"x16" 149.25 GYV*-160160-QCR 16"x16" 122.70 GZV*-160160-QCR 16"x16" 134.00GXV*-200200-QCR 20"x20" 161.30 GYV*-200200-QCR 20"x20" 137.60 GZV*-200200-QCR 20"x20" 143.60GXV*-240240-QCR 24"x24" 173.50 GYV*-240240-QCR 24"x24" 136.40 GZV*-240240-QCR 24"x24" 153.30GXV*-300300-QCR 30"x30" 202.45 GYV*-300300-QCR 30"x30" 156.60 GZV*-300300-QCR 30"x30" 177.70GXV*-160320-QCR 16"x32" 173.50 GYV*-160320-QCR 16"x32" 136.40 GZV*-160320-QCR 16"x32" 153.30


GXS-120-HCR 12" 56.20 GYS-120-HCR 12" 43.35 GZS-120-HCR 12" 48.70GXS-160-HCR 16" 62.35 GYS-160-HCR 16" 46.55 GZS-160-HCR 16" 52.35GXS-180-HCR 18" 66.60 GYS-180-HCR 18" 49.15 GZS-180-HCR 18" 55.65GXS-240-HCR 24" 80.50 GYS-240-HCR 24" 58.00 GZS-240-HCR 24" 63.70GXS-300-HCR 30" 91.35 GYS-300-HCR 30" 64.15 GZS-300-HCR 30" 70.45GXS-320-HCR 32" 97.20 GYS-320-HCR 32" 68.20 GZS-320-HCR 32" 73.75GXS-360-HCR 36" 105.50 GYS-360-HCR 36" 73.20 GZS-360-HCR 36" 80.00GXS-420-HCR 42" 116.60 GYS-420-HCR 42" 79.50 GZS-420-HCR 42" 84.45GXS-480-HCR 48" 129.35 GYS-480-HCR 48" 87.30 GZS-480-HCR 48" 91.60

GXT-160160-HCR 16"x16" 168.75 GYT-160160-HCR 16"x16" 141.30 GZT-160160-HCR 16"x16" 152.40GXT-160320-HCR 16"x32" 199.50 GYT-160320-HCR 16"x32" 154.60 GZT-160320-HCR 16"x32" 171.45GXT-240240-HCR 24"x24" 199.50 GYT-240240-HCR 24"x24" 154.60 GZT-240240-HCR 24"x24" 171.45GXT-200400-HCR 20"x40" 225.75 GYT-200400-HCR 20"x40" 178.80 GZT-200400-HCR 20"x40" 199.90GXT-240360-HCR 24"x36" 225.75 GYT-240360-HCR 24"x36" 178.80 GZT-240360-HCR 24"x36" 199.90GXT-240480-HCR 24"x48" 252.85 GYT-240480-HCR 24"x48" 197.40 GZT-240480-HCR 24"x48" 222.75GXT-300300-HCR 30"x30" 225.75 GYT-300300-HCR 30"x30" 178.80 GZT-300300-HCR 30"x30" 199.90GXT-360360-HCR 36"x36" 252.90 GYT-360360-HCR 36"x36" 197.40 GZT-360360-HCR 36"x36" 222.75GXT-360480-HCR 36"x48" 278.60 GYT-360480-HCR 36"x48" 214.85 GZT-360480-HCR 36"x48" 244.20GXT-360540-HCR 36"x54" 291.40 GYT-360540-HCR 36"x54" 223.60 GZT-360540-HCR 36"x54" 255.00

GXV*-160160-HCR 16"x16" 168.75 GYV*-160160-HCR 16"x16" 141.30 GZV*-160160-HCR 16"x16" 152.40GXV*-200200-HCR 20"x20" 180.90 GYV*-200200-HCR 20"x20" 148.10 GZV*-200200-HCR 20"x20" 162.20GXV*-240240-HCR 24"x24" 199.50 GYV*-240240-HCR 24"x24" 154.60 GZV*-240240-HCR 24"x24" 171.45GXV*-300300-HCR 30"x30" 225.75 GYV*-300300-HCR 30"x30" 178.80 GZV*-300300-HCR 30"x30" 199.90GXV*-160320-HCR 16"x32" 199.50 GYV*-160320-HCR 16"x32" 154.60 GZV*-160320-HCR 16"x32" 171.45

* (Designate L or R) * (Designate L or R) * (Designate L or R)

"T" TUB & SHOWER "T" TUB & SHOWER "T" TUB & SHOWER

"V" VERTICAL ANGLE "V" VERTICAL ANGLE "V" VERTICAL ANGLE

* (Designate L or R)

"H" 1-1/2" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER "H" 1-1/2" TUBE DIAMETER

"S" STRAIGHT "S" STRAIGHT "S" STRAIGHT

* (Designate L or R) * (Designate L or R)

"T" TUB & SHOWER "T" TUB & SHOWER "T" TUB & SHOWER

"V" VERTICAL ANGLE "V" VERTICAL ANGLE "V" VERTICAL ANGLE

"Q" 1-1/4" TUBE DIAMETER "Q" 1-1/4" TUBE DIAMETER "Q" 1-1/4" TUBE DIAMETER


POLISHED STAINLESS PEENED with SATIN ENDS PEENED with POLISHED ENDS"GX" SERIES "GY" SERIES "GZ" SERIES


8


SIGNATURE SERIES - POLISHED BRASS - POWDER COAT - DOMESTIC GRAB BARS MADE IN THE USA


GBS-120-QCB-BB 12" 92.90 GPS-120-QCR 12" 52.10 GPS-120-HCR 12" 57.35GBS-160-QCB-BB 16" 86.90 GPS-160-QCR 16" 56.00 GPS-160-HCR 16" 62.55GBS-180-QCB-BB 18" 89.45 GPS-180-QCR 18" 58.65 GPS-180-HCR 18" 65.15GBS-240-QCB-BB 24" 102.35 GPS-240-QCR 24" 66.50 GPS-240-HCR 24" 82.10GBS-300-QCB-BB 30" 114.45 GPS-300-QCR 30" 74.30 GPS-300-HCR 30" 85.50GBS-320-QCB-BB 32" 117.30 GPS-320-QCR 32" 76.95 GPS-320-HCR 32" 87.40GBS-360-QCB-BB 36" 128.80 GPS-360-QCR 36" 80.80 GPS-360-HCR 36" 91.25GBS-420-QCB-BB 42" 146.65 GPS-420-QCR 42" 87.35 GPS-420-HCR 42" 97.75GBS-480-QCB-BB 48" 178.10 GPS-480-QCR 48" 95.05 GPS-480-HCR 48" 105.50

GBT-160160-QCB-BB 16"x16" 187.85 GPT-160160-QCR 16"x16" 114.10 GPT-160160-HCR 16"x16" 129.05GBT-160320-QCB-BB 16"x32" 243.50 GPT-160320-QCR 16"x32" 131.00 GPT-160320-HCR 16"x32" 145.65GBT-240240-QCB-BB 24"x24" 243.50 GPT-240240-QCR 24"x24" 131.00 GPT-240240-HCR 24"x24" 145.65GBT-200400-QCB-BB 20"x40" 313.15 GPT-200400-QCR 20"x40" 152.45 GPT-200400-HCR 20"x40" 170.45GBT-240360-QCB-BB 24"x36" 313.15 GPT-240360-QCR 24"x36" 152.45 GPT-240360-HCR 24"x36" 170.45GBT-240480-QCB-BB 24"x48" 375.70 GPT-240480-QCR 24"x48" 172.85 GPT-240480-HCR 24"x48" 190.75GBT-300300-QCB-BB 30"x30" 313.15 GPT-300300-QCR 30"x30" 152.45 GPT-300300-HCR 30"x30" 170.45GBT-360360-QCB-BB 36"x36" 375.70 GPT-360360-QCR 36"x36" 172.85 GPT-360360-HCR 36"x36" 190.75GBT-360480-QCB-BB 36"x48" 438.40 GPT-360480-QCR 36"x48" 194.05 GPT-360480-HCR 36"x48" 209.25GBT-360540-QCB-BB 36"x54" 466.15 GPT-360540-QCR 36"x54" 204.05 GPT-360540-HCR 36"x54" 218.55

GBV*-160160-QCB-BB 16"x16" 187.85 GPV*-160160-QCR 16"x16" 114.10 GPV*-160160-HCR 16"x16" 129.05GBV*-200200-QCB-BB 20"x20" 215.70 GPV*-200200-QCR 20"x20" 122.50 GPV*-200200-HCR 20"x20" 134.10GBV*-240240-QCB-BB 24"x24" 243.50 GPV*-240240-QCR 24"x24" 131.00 GPV*-240240-HCR 24"x24" 145.65GBV*-300300-QCB-BB 30"x30" 313.15 GPV*-300300-QCR 30"x30" 152.45 GPV*-300300-HCR 30"x30" 170.45GBV*-160320-QCB-BB 16"x32" 243.50 GPV*-160320-QCR 16"x32" 131.00 GPV*-160320-HCR 16"x32" 145.65

POWDER COAT (PC) OPTIONS:AL = Almond MB = Matte BlackAW = Almond Wrinkle PB = Polished BrassBI = Biscuit SN = Satin NickelBK = Black WT = WhiteBR = Bronze WW = White Wrinkle

SIGNATURE SERIES - CUSTOM GRAB BARS

Seachrome can manufacture your custom size grab bar in any number of configurations, sizes, and finishes. Please contact Seachrome and speak with your Account Manager for information on pricing and lead times. All custom

grab bars are manufactured to meet Federal Specifications and ADA Requirements.

"V" VERTICAL ANGLE


"V" VERTICAL ANGLE


POWDER COATED STAINLESS

"GP SERIES"

POLISHED BRASS

"T" TUB & SHOWER

"Q" 1-1/4" TUBE DIAMETER

"V" VERTICAL ANGLE


"GB SERIES"

"T" TUB & SHOWER


"T" TUB & SHOWER

"H" 1-1/2" TUBE DIAMETER"Q" 1-1/4" TUBE DIAMETER

SIGNATURE SERIES - INSTITUTIONAL LIGATURE RESISTANT GRAB BARS

MADE IN THE USA

Length HEW HEO16" 106.84 105.3018" 113.62 112.0924" 137.09 135.5530" 157.44 155.9032" 163.37 161.8336" 179.20 179.3742" 201.26 199.7248" 227.84 226.30

Length HEW HEO

16" 97.24 95.7018" 102.10 100.5724" 117.89 116.3530" 130.56 129.0232" 137.34 135.8136" 142.51 140.9742" 162.86 161.3248" 189.44 187.90

Length

SIGNATURE SERIES - COPPER ALLOY GRAB BARS MADE IN THE USA

Item # Length Description QCR

GCSS-120 12" 143.26GCSS-180 18" 171.85GCSS-240 24" 200.44GCSS-300 30" 229.03GCSS-360 36" 257.61GCSS-420 42" 286.20GCSS-480 48" 315.80

GSSIS-480

134.07161.76185.78192.78211.46237.49268.85

36"42"48"

GSSIS-360GSSIS-420

GSSIS-180GSSIS-240GSSIS-300GSSIS-320

16"18"24"30"32"

LIGATURE RESISTANT GRAB BARS - FLANGELESS BRACKET - STITCH WELDItem # QWB

126.07


GSSIS-160

GSSIS-180GSSIS-240GSSIS-300

Item #

GSSIS-160

Item #GSSI-160

LIGATURE RESISTANT GRAB BARS - CONTINUOUS WELD

GSSI-480

LIGATURE RESISTANT GRAB BARS - STITCH WELD

GSSI-180GSSI-240GSSI-300GSSI-320GSSI-360GSSI-420

Seachrome Copper Alloy Grab Bars are manufactured using CuVerro® Bactericidal Copper surfaces. CuVerro® surfaces kill bacteria that cause

infections and is an effective supplement to existing infection control practices. CuVerro® is EPA-registered and is 100% recyclable made from post

and pre-consumer materials.

CuVerro® is a registered trademark of GBC Metals, LLC and is used with permission.

COPPER ALLOY GRAB BARS - MANUFACTURED WITH CUVERRO®HCR

148.99178.72208.46238.19267.92

327.39297.66

HEW Configuration

HEO Configuration

QWB Configuration

GCSS-120-QCR

24" Straight Grab Bar, CuVerro® antimicrobial copper alloy18" Straight Grab Bar, CuVerro® antimicrobial copper alloy

30" Straight Grab Bar, CuVerro® antimicrobial copper alloy36" Straight Grab Bar, CuVerro® antimicrobial copper alloy42" Straight Grab Bar, CuVerro® antimicrobial copper alloy48" Straight Grab Bar, CuVerro® antimicrobial copper alloy

12" Straight Grab Bar, CuVerro® antimicrobial copper alloy


9

SIGNATURE SERIES - INSTITUTIONAL LIGATURE RESISTANT GRAB BARS

MADE IN THE USA

Length HEW HEO16" 106.84 105.3018" 113.62 112.0924" 137.09 135.5530" 157.44 155.9032" 163.37 161.8336" 179.20 179.3742" 201.26 199.7248" 227.84 226.30

Length HEW HEO

16" 97.24 95.7018" 102.10 100.5724" 117.89 116.3530" 130.56 129.0232" 137.34 135.8136" 142.51 140.9742" 162.86 161.3248" 189.44 187.90

Length

SIGNATURE SERIES - COPPER ALLOY GRAB BARS MADE IN THE USA

Item # Length Description QCR

GCSS-120 12" 143.26GCSS-180 18" 171.85GCSS-240 24" 200.44GCSS-300 30" 229.03GCSS-360 36" 257.61GCSS-420 42" 286.20GCSS-480 48" 315.80

GSSIS-480

134.07161.76185.78192.78211.46237.49268.85

36"42"48"

GSSIS-360GSSIS-420


16"18"24"30"32"

LIGATURE RESISTANT GRAB BARS - FLANGELESS BRACKET - STITCH WELDItem # QWB

126.07


GSSIS-160

GSSIS-180GSSIS-240GSSIS-300

Item #

GSSIS-160

Item #GSSI-160

LIGATURE RESISTANT GRAB BARS - CONTINUOUS WELD

GSSI-480

LIGATURE RESISTANT GRAB BARS - STITCH WELD

GSSI-180GSSI-240GSSI-300GSSI-320GSSI-360GSSI-420

Seachrome Copper Alloy Grab Bars are manufactured using CuVerro® Bactericidal Copper surfaces. CuVerro® surfaces kill bacteria that cause

infections and is an effective supplement to existing infection control practices. CuVerro® is EPA-registered and is 100% recyclable made from post

and pre-consumer materials.

CuVerro® is a registered trademark of GBC Metals, LLC and is used with permission.

COPPER ALLOY GRAB BARS - MANUFACTURED WITH CUVERRO®HCR

148.99178.72208.46238.19267.92

327.39297.66

HEW Configuration

HEO Configuration

QWB Configuration

GCSS-120-QCR

24" Straight Grab Bar, CuVerro® antimicrobial copper alloy18" Straight Grab Bar, CuVerro® antimicrobial copper alloy

30" Straight Grab Bar, CuVerro® antimicrobial copper alloy36" Straight Grab Bar, CuVerro® antimicrobial copper alloy42" Straight Grab Bar, CuVerro® antimicrobial copper alloy48" Straight Grab Bar, CuVerro® antimicrobial copper alloy

12" Straight Grab Bar, CuVerro® antimicrobial copper alloy


10


Aluminum Shower Rods 1" OD X .025" Wall Size PS PCSRA-36.000 36" Straight 5.75 ---SRA-60.000 60" Straight 6.60 ---SRA-72.000 72" Straight 9.65 ---

Chrome Shower Rods 1" OD X .025" Wall PS PCSRSCF-B60BS6 60" Curved Shower Rod Set (Includes Pivoting Flange), Polished Chrome 80.90 ---

#304 Stainless Steel Shower Rods 1" OD X .035" (20 gauge) Wall PS PCSR20-36.000 36" Straight 18.15 37.45SR20-48.000 48" Straight 21.80 43.00SR20-60.000 60" Straight 27.20 50.50SR20-72.000 72" Straight 36.35 57.95

SR20-C60.000 60" Curved ( use # SRF-555 or # SRF-551 Flanges) 40.10 91.25SR20-C72.000 72" Curved ( use # SRF-555 or # SRF-551 Flanges) 47.75 98.40

#304 Stainless Steel Shower Rods 1" OD X .049" (18 gauge) Wall PS PCSR18-36.000 36" Straight 24.70 44.15SR18-48.000 48" Straight 29.60 51.00SR18-60.000 60" Straight 37.00 60.60SR18-72.000 72" Straight 49.15 73.15SR18-L6036 60"x 36" L-Shape Rod with Welded Concealed Flanges (use # SR-CSJ24 Ceiling Support) 135.55 181.45SR18-L7236 72"x 36" L-Shape Rod with Welded Concealed Flanges (use # SR-CSJ24 Ceiling Support) 141.25 189.10

Shower Rod Flanges for 1" Diameter Rods PS PCSCM-61-F (SRF-500) Concealed Flange & Hanger, 2-1/2" Diameter, Triple Chrome Plated Steel 3.25 7.30

SRF-500-E Exposed Screw, 2-3/8" Diameter, Chrome Plated Zamac 3.60 ---SCM-63-F (SRF-500MD) Exposed Screw, 2-1/4" Diameter, Chrome Plated Zamac 6.50 ---

SCM-52-F (SRF-501) Adjustable Jiffy-On, Polished Aluminum Finish 6.75 ---SCM-54-F (SRF-501C) Adjustable Jiffy-On, Chrome Plated Plastic 2.05 2.85

SR-CSJ24 Ceiling Support (for 1" L-Shaped Rod) 24" Hanger with J-Hook 32.25 50.10SRF-510 Exposed Flange, 22 Gauge x 1/2" Deep Stainless Steel, 3" Diameter 9.00 14.90SRF-514 Concealed Flange, 22 Gauge Snap-On Cover, 3" Diameter 17.35 25.90SRF-555 Pivoting Flange (for 1" Curved Rod) - #304 Stainless 31.75 ---SRF-551 Fixed Flange (for 1" Curved Rod) - #304 Stainless 24.60 32.75

#304 Stainless Steel Shower Rods 1-1/4" OD x .049" (18 gauge) Wall PS PCSR18Q-36.000 36" Straight 31.20 50.90SR18Q-48.000 48" Straight 37.45 59.10SR18Q-60.000 60" Straight 46.80 70.70SR18Q-72.000 72" Straight 57.30 81.50

Shower Rod Flanges for 1-1/4" Diameter Rods PS PCSRF-511 Exposed Flange, 22 Gauge x 1/2" Deep Stainless Steel, 3" Diameter 8.80 14.65SRF-515 Concealed Flange, 22 Gauge Snap-On Cover, 3" Diameter 17.60 25.40

Shower Curtains (Heavy Duty 0.010" White Vinyl) MADE IN THE USA SHC-H04872-WU Heavy-Duty 48" x 72" White Curtain with Brass/Nickel Grommets on 6" Centers, Un-Weighted 36.60 ---SHC-H07272-WU Heavy-Duty 72" x 72" White Curtain with Brass/Nickel Grommets on 6" Centers, Un-Weighted 49.35 ---

Shower Curtain Rings SRC-100-MT Curtain Ring, Nickel Plated (ea.) 0.85 ---SRC-100-SS Curtain Ring, Stainless Steel (ea.) 1.15 ---

CALL FOR PRICE & AVAILABILITY ON CUSTOM SIZES

SIGNATURE SERIES - SHOWER RODS - FLANGES - SHOWER CURTAINS - CURTAIN RINGS

----Finish Options---

SCM-52-F SCM-54-F

SRF-510 SRF-511

SRF-514 SRF-515

SCM-63-F

SCM-61-F

SIGNATURE SERIES - ADA REVERSIBLE SHOWER TRANSFER SEATS MADE IN THE USA

SEAT TOP MATERIAL OPTIONS FEATURESPAS Phenolic Almond One-Piece SolidPTS Phenolic Teak One-Piece SolidPWS Phenolic White One-Piece Solid

All Seachrome seats meet Federal Specification WW-P-541/8b and allADA code requirements (250 lbs. of force) when properly installed.

All Seachrome seats meet ADA CodeFor EXTRA HEAVY load requirements select SLR2 Models which Operation 309.4 which requires 5 lbs.have been tested to withstand 1,000 lbs. of force when properly installed. of force or less to lift the seat.

ADA REVERSIBLE TRANSFER SHOWER SEATSThe Seachrome Reversible Transfer Shower Seat is available in both the Yoke style in 4

widths and the Swing Down Leg style in 5 widths. These seats allow for maximum flexibility when ordering. All Seachrome Reversible Shower Seats are fabricated using Seachrome's

Technology (Patent # US 9,844,272 B1).

● One Piece welded frame ensures durability ● Seat top is countersunk on both sides● Available is 3 seat top colors● Seat top comes unattached for easy installation

REVERSIBLE TRANSFER SEATS ( PAS, PTS or PWS ONLY)

Item #

SLR-260225

SLR-280225

SLR-320225

SLR-345225

Description Cube Lbs PAS / PTS / PWS

LH/RH L-Shaped Shower Seat 26" x 22.5" 3.31 24 368.45


420.35

REVERSIBLE TRANSFER SEATS WITH SWING DOWN LEGS (PAS, PTS or PWS ONLY)

Item # Description Cube Lbs PAS / PTS / PWS

SLR2-260225 LH/RH L-Shaped Shower Seat (with swing down legs) 26" x 22.5" 3.22 26 455.20




SLR2-345225 LH/RH L-Shaped Shower Seat (with swing down legs) 34.5" x 22.5" 3.22 30 501.10


LH/RH L-Shaped Shower Seat 34.5" x 22.5" 3.31 27

patented


11

SIGNATURE SERIES - ADA REVERSIBLE SHOWER TRANSFER SEATS MADE IN THE USA

SEAT TOP MATERIAL OPTIONS FEATURESPAS Phenolic Almond One-Piece SolidPTS Phenolic Teak One-Piece SolidPWS Phenolic White One-Piece Solid


All Seachrome seats meet ADA CodeFor EXTRA HEAVY load requirements select SLR2 Models which Operation 309.4 which requires 5 lbs.have been tested to withstand 1,000 lbs. of force when properly installed. of force or less to lift the seat.

ADA REVERSIBLE TRANSFER SHOWER SEATSThe Seachrome Reversible Transfer Shower Seat is available in both the Yoke style in 4

widths and the Swing Down Leg style in 5 widths. These seats allow for maximum flexibility when ordering. All Seachrome Reversible Shower Seats are fabricated using Seachrome's

Technology (Patent # US 9,844,272 B1).

● One Piece welded frame ensures durability ● Seat top is countersunk on both sides● Available is 3 seat top colors● Seat top comes unattached for easy installation

REVERSIBLE TRANSFER SEATS ( PAS, PTS or PWS ONLY)

Item #

SLR-260225

SLR-280225

SLR-320225

SLR-345225

Description Cube Lbs PAS / PTS / PWS



420.35

REVERSIBLE TRANSFER SEATS WITH SWING DOWN LEGS (PAS, PTS or PWS ONLY)

Item # Description Cube Lbs PAS / PTS / PWS





SLR2-345225 LH/RH L-Shaped Shower Seat (with swing down legs) 34.5" x 22.5" 3.22 30 501.10


LH/RH L-Shaped Shower Seat 34.5" x 22.5" 3.31 27

patented


12

MADE IN THE USA SIGNATURE SERIES - ACCESSIBILITY SEATS

SEAT TOP MATERIAL OPTIONS All Seachrome seats meet Federal Specification NA Naugahyde Almond Cushion WW-P-541/8b and all ADA code requirements NW Naugahyde White Cushion (250 lbs. of force) when properly installed.PA Phenolic Almond 3" SlatsPT Phenolic Teak 3" SlatsPW Phenolic White 3" Slats For EXTRA HEAVY load requirements, PAS Phenolic Almond One-Piece Solid select SSR2, SSL2, or SSB2 Models, whichPTS Phenolic Teak One-Piece Solid have been tested to withstand 1,000 lbs.PWS Phenolic White One-Piece Solid of force when properly installedHW White HDPE One-Piece Solid

All Seachrome seats meet ADA Code Operation 309.4which require 5 lbs. of force or less to lift the seat

BENCH SEATS

Item # Description Cube Lbs NA / NWPA / PT

PW

SSB-180150 3.31 16 306.30 367.40SSB-220150 3.31 18 339.50 401.60SSB-240150 3.31 19 356.70 417.70SSB-280150 3.31 20 384.50 445.50SSB-300150 3.31 21 401.60 473.40SSB-320150 3.31 22 417.70 490.55

TRANSFER SEATS


PW

SSL-260225 3.31 24 428.40 477.65SSR-260225 3.31 24 428.40 477.65SSL-280225 3.31 24 440.15 489.45SSR-280225 3.31 24 440.15 489.45SSL-320225 3.31 25 452.00 500.15SSR-320225 3.31 25 452.00 500.15

LH L-Shaped Shower Seat 28" x 22.5" RH L-Shaped Shower Seat 28" x 22.5" LH L-Shaped Shower Seat 32" x 22.5" RH L-Shaped Shower Seat 32" x 22.5"

PAS / PTSPWS / HW

367.40401.60417.70445.50473.40490.55

PAS / PTSPWS / HW

477.65477.65489.45489.45500.15500.15

---------- Seat Top Material Options ----------

Bench Style Shower Seat 18" x 15"Bench Style Shower Seat 22" x 15"Bench Style Shower Seat 24" x 15"Bench Style Shower Seat 28" x 15"

Bench Style Shower Seat 32" x 15"Bench Style Shower Seat 30" x 15"

INCLUDING ADA CODE 309.4 WHICH REQUIRES 5 LBS. OF FORCE OR LESS TO LIFT THE SEAT.

SEACHROME SHOWER AND TUB SEATS MEET ALL REQUIREMENTS FOR ADA COMPLIANCE.

SEACHROME CAN MANUFACTURE CUSTOM SIZE SEATS TO MEET ANY NEED - CONTACT US FOR INFORMATION

---------- Seat Top Material Options --------

LH L-Shaped Shower Seat 26" x 22.5"RH L-Shaped Shower Seat 26" x 22.5"

SSB-180150-PWS

SSR-320225-PT SSL-260225-NW

SSB-180150-NW

BENCH SEATS WITH SWING DOWN LEGS


PW

SSB2-180150 3.31 19 414.05 456.25

SSB2-220150 3.31 20 449.90 484.40

SSB2-240150 3.31 22 466.75 501.25

SSB2-280150 3.31 26 495.95 529.10

SSB2-300150 3.31 27 513.85 551.55

SSB2-320150 3.31 28 530.75 574.10

SSB2-420200 8.00 39 718.15 ---

SSB2-480240 8.00 53 917.00 ---

TRANSFER SEATS WITH SWING DOWN LEGS


PW

SSL2-260225 3.22 26 518.40 568.70

SSR2-260225 3.22 26 518.40 568.70

SSL2-280225 3.22 27 529.10 579.40

SSR2-280225 3.22 27 529.10 579.40

SSL2-320225 3.22 28 540.85 590.10

SSR2-320225 3.22 28 540.85 590.10

SSL2-360225 3.22 32 552.50 603.75

SSR2-360225 3.22 32 552.50 603.75

SSL2-420225 3.22 38 570.00 ---

SSR2-420225 3.22 38 570.00 ---

625.30

625.30

LH L-Shaped Shower Seat (with swing down legs) 26" x 22.5"

RH L- Shaped Shower Seat (with swing down legs) 26" x 22.5"

LH L- Shaped Shower Seat (with swing down legs) 28" x 22.5"





RH L-Shaped Shower Seat (with swing down legs) 36" x 22.5"



PAS / PTSPWS / HW

568.70

568.70

579.40

579.40

590.10

590.10

603.75

603.75

1,034.30

------- Seat Top Material Options -------

Bench Style Shower Seat (with swing down legs) 18" x 15"








PAS / PTSPWS / HW

456.25

484.40

501.25

529.10

551.55

574.10

878.75



---------------- Seat Top Material Options ----------------

SSB2-480240-PWS

SSL2-320225-PWS

SSB2-240150-NW

SSR2-320225-NW



13

BENCH SEATS WITH SWING DOWN LEGS


PW

SSB2-180150 3.31 19 414.05 456.25

SSB2-220150 3.31 20 449.90 484.40

SSB2-240150 3.31 22 466.75 501.25

SSB2-280150 3.31 26 495.95 529.10

SSB2-300150 3.31 27 513.85 551.55

SSB2-320150 3.31 28 530.75 574.10

SSB2-420200 8.00 39 718.15 ---

SSB2-480240 8.00 53 917.00 ---

TRANSFER SEATS WITH SWING DOWN LEGS


PW

SSL2-260225 3.22 26 518.40 568.70

SSR2-260225 3.22 26 518.40 568.70

SSL2-280225 3.22 27 529.10 579.40

SSR2-280225 3.22 27 529.10 579.40

SSL2-320225 3.22 28 540.85 590.10

SSR2-320225 3.22 28 540.85 590.10

SSL2-360225 3.22 32 552.50 603.75

SSR2-360225 3.22 32 552.50 603.75

SSL2-420225 3.22 38 570.00 ---

SSR2-420225 3.22 38 570.00 ---

625.30

625.30











PAS / PTSPWS / HW

568.70

568.70

579.40

579.40

590.10

590.10

603.75

603.75

1,034.30

------- Seat Top Material Options -------









PAS / PTSPWS / HW

456.25

484.40

501.25

529.10

551.55

574.10

878.75




SSB2-480240-PWS

SSL2-320225-PWS

SSB2-240150-NW

SSR2-320225-NW



14


SEAT TOP MATERIAL OPTIONSNA Naugahyde Almond CushionNW Naugahyde White CushionPA Phenolic Almond 3" SlatsPT Phenolic Teak 3" SlatsPW Phenolic White 3" SlatsPAS Phenolic Almond One-Piece SolidPTS Phenolic Teak One-Piece SolidPWS Phenolic White One-Piece SolidMW Blow Molded White HDPE PlasticSS Satin Stainless Steel


TUB SEATS

Item # Description Cube Lbs MW NA / NWPA / PT

PW

STE-320135 End-Hung Folding Tub Seat, 32" x 13.5"Frameless 2.13 13 ----- ----- -----

STE1-320135 End-Hung Folding Tub Seat, 32" x 13.5"with SS Frame 2.13 16 ----- 337.60 426.10

STE-320160 End-Hung Folding Tub Seat, 32" x 16"Frameless 2.20 17 ----- --- -----

STE1-320160 End-Hung Folding Tub Seat, 32" x 16"with SS Frame 2.20 20 ----- 352.70 -----

STR-290165 Rear-Hung Folding Tub Seat, 29" x 16.5"Frameless 2.13 16 ----- --- -----

STR1-290165 Rear-Hung Folding Tub Seat, 29" x 16.5" with SS Frame 2.13 19 ----- 362.90 451.40

TFRS-290150 End-Hung Tri-Fold , Removable TubSeat, 29" x 15" 2.13 12 169.85 --- -----

PORTABLE TUB SEATS

Item # Description Cube Lbs MW NA / NWPA / PT

PW

STPQ-265160 Edge - Mounted Portable Tub Seat, 26.5" x 16" 2.13 14 --- --- ---

STPQ2-435150 Edge - Mounted Portable Tub Seat with Dual Fold Down Adjustable Legs, 43.5" x 15" 4.00 25 ----- ----- -----

SHPQ-265150 Edge - Mounted Portable Tub Seat with Dual Clampsand Quick-Release Pin, 26.5" x 15" 2.50 20 --- --- ---

625.55

-----

557.00


PAS / PTSPWS

312.30

PAS / PTSPWS

373.60

-----

328.45

-----

337.60

-----



STE1-320135-PT

STPQ-265160-PWS

SHPQ-265150-PTS

STR-290165-PTS

STPQ2-435150-PWS

TFRS-290150-MW

INSTITUTIONAL, BARIATRIC & STATIONARY BENCH SEATS

Item # Description Cube Lbs

SLDY-320225 LH Transfer Seat (with Dual Yoke), 32" x 22.5"One-Piece Stainless Steel Seat Top 3.31 32

SRDY-320225 RH Transfer Seat (with Dual Yoke), 32" x 22.5"One-Piece Stainless Steel Seat Top 3.31 32

SBDY-320150 Bench Seat (with Dual Yoke), 32" x 15"One-Piece Stainless Steel Seat Top 3.31 32

SBB3-360180 Bariatric Bench Seat (with swing down legs), 36" x 18" 7.00 40

SSBB-420200 Stationary Bench Seat (with Back Rest), 42" x 20" ----- 125


ACCESSIBILITY SEATS - ADDITIONAL ITEMSItem # Description Price Price

Powder Coat (PC) Seat Frame Add 230.00 23.40

Polished Stainless (PS) Seat Frame Add 290.00

P-2SDL-SS 1" Threaded Seat Leg Bolt (Standard Leveling Foot)Stainless Steel / Black, Each 7.00 2.30

S-LSF-SS 3" Seat Leg Support Flange with Threaded Stud (Leveling Foot),Stainless Steel / Black, Each 27.50

P-WSH-SS 35.50

REPLACEMENT SEAT TOPS - BENCH SEATS REPLACEMENT SEAT TOPS - TRANSFER SEATSNA/NW CUSHION NA/NW CUSHION 18"- 22"- 24" Wide x 13.5" 190.00 26" - 28"- 32" Wide x 21" 235.0028"- 30"- 32" Wide x 13.5" 220.00

PAS/PWS/PTS PHENOLIC One-PIECE SOLID PAS/PWS/PTS PHENOLIC One-PIECE SOLID 18" - 22" - 24" Wide x 13.5" 210.00 26" - 28"- 32" Wide x 21" 245.0028" - 30" - 32" Wide x 13.5" 230.00

CUSTOM "WAVE" SLOTS Add 45.00


1,125.00

1,288.00

Wall - Mount Support Hook Stainless Steel, Each

Slide / Guide Bracket for Wall Mount Seats, Stainless Steel, Each (with hardware)

SEACHROME RECOMMENDS THAT ALL ACCESSIBILITY SEATS, AS WELL AS GRAB BARS, BE INSTALLED USING 2" MINIMUM THICKNESS"IN-WALL" SOLID WOOD BACKING MATERIAL WITH #12 X 2 ½" STAINLESS STEEL, PHILLIPS HEAD SCREWS (INCLUDED).

Item # Description

P-GB-SS

ACCESSIBILITY SEATS - ADDITIONAL NOTES

P-4C10-2

---

---

---

PAS / PTSPWS

Stainless Steel (SS)

1,287.25

1,287.25

1,287.25

----

----

----

886.15

Seachrome Institutional, Bariatric and Stationary Bench Seats have been tested to withstand over 1,500 lbs. of force when properly installed.

SBB3-360180-PWS

SRDY-320225-SS

SSBB-420200-PTS

SBDY-320150-SS


#10 x 2 ½" Stainless Steel mounting screws for Grab Bars and /or #12 x 2 ½" Stainless Steel mounting screws for Seats. Each pack contains 6 mounting screws.


15

INSTITUTIONAL, BARIATRIC & STATIONARY BENCH SEATS

Item # Description Cube Lbs

SLDY-320225 LH Transfer Seat (with Dual Yoke), 32" x 22.5"One-Piece Stainless Steel Seat Top 3.31 32

SRDY-320225 RH Transfer Seat (with Dual Yoke), 32" x 22.5"One-Piece Stainless Steel Seat Top 3.31 32

SBDY-320150 Bench Seat (with Dual Yoke), 32" x 15"One-Piece Stainless Steel Seat Top 3.31 32

SBB3-360180 Bariatric Bench Seat (with swing down legs), 36" x 18" 7.00 40



ACCESSIBILITY SEATS - ADDITIONAL ITEMSItem # Description Price Price

Powder Coat (PC) Seat Frame Add 230.00 23.40

Polished Stainless (PS) Seat Frame Add 290.00

P-2SDL-SS 1" Threaded Seat Leg Bolt (Standard Leveling Foot)Stainless Steel / Black, Each 7.00 2.30

S-LSF-SS 3" Seat Leg Support Flange with Threaded Stud (Leveling Foot),Stainless Steel / Black, Each 27.50

P-WSH-SS 35.50

REPLACEMENT SEAT TOPS - BENCH SEATS REPLACEMENT SEAT TOPS - TRANSFER SEATSNA/NW CUSHION NA/NW CUSHION 18"- 22"- 24" Wide x 13.5" 190.00 26" - 28"- 32" Wide x 21" 235.0028"- 30"- 32" Wide x 13.5" 220.00

PAS/PWS/PTS PHENOLIC One-PIECE SOLID PAS/PWS/PTS PHENOLIC One-PIECE SOLID 18" - 22" - 24" Wide x 13.5" 210.00 26" - 28"- 32" Wide x 21" 245.0028" - 30" - 32" Wide x 13.5" 230.00

CUSTOM "WAVE" SLOTS Add 45.00


1,125.00

1,288.00

Wall - Mount Support Hook Stainless Steel, Each

Slide / Guide Bracket for Wall Mount Seats, Stainless Steel, Each (with hardware)

SEACHROME RECOMMENDS THAT ALL ACCESSIBILITY SEATS, AS WELL AS GRAB BARS, BE INSTALLED USING 2" MINIMUM THICKNESS"IN-WALL" SOLID WOOD BACKING MATERIAL WITH #12 X 2 ½" STAINLESS STEEL, PHILLIPS HEAD SCREWS (INCLUDED).

Item # Description

P-GB-SS

ACCESSIBILITY SEATS - ADDITIONAL NOTES

P-4C10-2

---

---

---

PAS / PTSPWS

Stainless Steel (SS)

1,287.25

1,287.25

1,287.25

----

----

----

886.15

Seachrome Institutional, Bariatric and Stationary Bench Seats have been tested to withstand over 1,500 lbs. of force when properly installed.

SBB3-360180-PWS

SRDY-320225-SS

SSBB-420200-PTS

SBDY-320150-SS


#10 x 2 ½" Stainless Steel mounting screws for Grab Bars and /or #12 x 2 ½" Stainless Steel mounting screws for Seats. Each pack contains 6 mounting screws.


16


LIFESTYLE & WELLNESS® SERIES - GRAB BARS MADE IN THE USA

FINISH OPTIONS POWDER COAT (PC) OPTIONS

SS = Satin Stainless Finish AL = Almond MB = Matte Black

PS = Polished Stainless Finish AW = Almond Wrinkle PB = Polished Brass

PC = Powder Coat Finish BI = Biscuit SN = Satin Nickel

BK = Black WT = White

QCR = 1-1/4" O.D. Bar / Concealed Flange BR = Bronze WW = White Wrinkle

HCR = 1-1/2" O.D. Bar / Concealed Flange

Item # Description SS - QCR SS - HCR PS - QCR PS-HCR PC-QCR PC-HCR

GW-3016 Wedge Bar 16" x 16" 115.00 120.25 136.95 143.25 136.95 143.25

GW-3518 Wave Bar 18" Overall 101.40 104.55 132.80 138.00 132.80 138.00




GWL-3638 LH Zuma Bar 16" x 11-3/4" x 16" 130.70 138.00 161.05 168.30 161.05 168.30

GWR-3638 RH Zuma Bar 16" x 11-3/4" x 16" 130.70 138.00 161.05 168.30 161.05 168.30


GW-3130 Maverick Double Arched Grab Bar 30" Overall 130.70 138.00 161.00 168.30 161.00 168.30

GW-3430 Crescent Grab Bar 30" 130.70 138.00 161.00 168.30 161.00 168.30


GW-3230 Half-Moon Bay Curved Grab Barwith Towel Bar 30" 141.15 148.50 173.55 181.95 173.55 181.95

GW-3930 Newport Grab Bar with Towel Bar 30" Overall 115.00 129.70 138.00 152.60 138.00 152.60

GW-3130-SERIES

GW-3230-SERIES

GWL-3638-SERIES

GW-3930-SERIES

GW-3016-SERIES

GW-3430-SERIES

GW-3518-SERIES GW-3524-SERIES GW-3536-SERIES GW-3548-SERIES

Lifestyle & Wellness® Grab Bars meet Federal Specification WW-P-541/8b and all ADA code requirements (250 lbs. of force) when properly installed. Seachrome recommends a minimum 2" of soild wood in-wall backing for all grab bar installations.


17


MADE IN THE USA


GWL-3330 LH Pismo Curved Grab Barwith Toilet Paper Holder 30" 146.40 151.60 174.60 184.00 174.60 184.00

GWR-3330 RH Pismo Curved Grab Barwith Toilet Paper Holder 30" 146.40 151.60 174.60 184.00 174.60 184.00

GWL-3730 LH Piano Curved Grab Bar with Towel Bar 30" 156.85 162.05 185.10 194.45 185.10 194.45

GWR-3730 RH Piano Curved Grab Bar with Towel Bar 30" 156.85 162.05 185.10 194.45 185.10 194.45


GWL-3830 LH U-Bar with Towel Bar - 30" X 11" 130.70 ---- 153.70 ----- 153.70 ----

GWR-3830 RH U-Bar with Towel Bar - 30" X 11" 130.70 ---- 153.70 ----- 153.70 ----

GW-4412-QNT Huntington Shower Valve Grab Bar 12"Front Mount 120.25 ---- 139.05 ----- 146.40 ----


GW-4130-Q Swing-Up Grab Bar 30" Overall 322.00 ---- 444.35 ---- 444.35 ----

GW-4236-Q Wall-To-Wall Swing-Away Grab Bar 380.60 ---- 510.20 ---- 510.20 ----

GW-4339-Q Wall-To-Floor Swing-Away Grab Bar 413.00 ---- 548.90 ---- 548.90 ----

THE ABOVE MODELS REPRESENT OUR STANDARD LIFESTYLE & WELLNESS® SERIES.SEACHROME DESIGNS, ENGINEERS AND MANUFACTURES CUSTOM SIZES AND STYLES.

CUSTOM FINISHES ARE ALSO AVAILABLE CALL FOR A QUOTATION

GW-4236-Q-SERIES GW-4339-Q-SERIES

GWL-3830-SERIES GW-4412-QNT-SERIES

GWR-3330-SERIES GWR-3730-SERIES

GW-4130-Q-SERIES

LIFESTYLE & WELLNESS® SERIES - GRAB BARS


18


FRAME FINISH OPTIONS POWDER COAT (PC) OPTIONS

PC Powder Coat AL = AlmondAW = Almond Wrinkle

SEAT TOP MATERIAL OPTIONS BI = BiscuitPWS Phenolic White One-Piece Solid BK = BlackPAS Phenolic Almond One-Piece Solid BR = BronzePTS Phenolic Teak One-Piece Solid

PB = Polished BrassSL = SilverSEAT DESIGN OPTIONS

WT = WhiteS Standard Drain SlotsWW = White WrinkleC Champagne Drain Slots

L Lotus Drain Slots

Item # Description

SHAF-185155-PAS-SSHAF-185155-PWS-S SHAF-185155-PTS-SSHAF-185155-PAS-CSHAF-185155-PWS-C SHAF-185155-PTS-CSHAF-185155-PAS-LSHAF-185155-PWS-L SHAF-185155-PTS-L

Item # DescriptionSHAFA-185155-PAS-SSHAFA-185155-PWS-S SHAFA-185155-PTS-S

Silhouette Bench Seat 19-3/8" W x 15-1/2" D with 12-3/4" Backrest with 1/2" One-Piece Solid Phenolic Seat Top available in White (PWS), Almond (PAS), or

Teak (PTS), Aluminum Extruded Frame / Lotus Drain Slots

Silhouette Bench Seat 19-3/8" W x 15-1/2" D with 14-3/4" Arched Backrest with 1/2" One-Piece Solid Phenolic Seat Top available in White (PWS), Almond (PAS), or

Teak (PTS), Aluminum Extruded Frame / Standard Drain Slots

-------- Frame Finish Options --------

THE ABOVE MODELS ARE JUST A FEW OF OUR MOST POPULAR DESIGNSSEACHROME CAN CUSTOMIZE OUR SILHOUETTE DRAIN SLOTS TO MATCH ANY DESIGN OR LOGO

CALL FOR A QUOTATION

599.90

PC

529.90

Seachrome Silhouette Shower Seats meet Federal Specification WW-P-541/8b and all ADA code requirements (250 lbs. of force) when properly installed. Seachrome recommends a minimum 2" of soild wood in-wall backing for all shower seat installations.

PC

472.40

599.90

Silhouette Shower Seats feature an easy to remove back piece to allow cleaning of the shower wall beind the seat.

-------- Frame Finish Options --------

Silhouette Bench Seat 19-3/8" W x 15-1/2" D with 12-3/4" Backrest with 1/2" One-Piece Solid Phenolic Seat Top available in White (PWS), Almond (PAS), or

Teak (PTS), Aluminum Extruded Frame / Standard Drain SlotsSilhouette Bench Seat 19-3/8" W x 15-1/2" D with 12-3/4" Backrest with

1/2" One-Piece Solid Phenolic Seat Top available in White (PWS), Almond (PAS), orTeak (PTS), Aluminum Extruded Frame / Champagne Drain Slots

SHAF-185155-PWS-S-SL SHAF-185155-PWS-C-WT SHAF-185155-PAS-L-BR

SHAFA-185155-PTS-S-SL

LIFESTYLE & WELLNESS ® SERIES - SILHOUETTE SHOWER SEAT MADE IN THE USA

MB = Matte Black


19


LIFESTYLE & WELLNESS® SERIES - SEATS / CORNER SHOWER SHELVES MADE IN THE USA

SEAT TOP MATERIAL OPTIONS

PA Phenolic Almond 3" Slats

PW Phenolic White 3" Slats

PT Phenolic Teak 3" Slats

PAS Phenolic Almond One-Piece Solid

PWS Phenolic White One-Piece Solid

PTS Phenolic Teak One-Piece Solid

PROFILE & CONTOUR SHOWER SEATS / BRIDGEPORT REMOVABLE TUB SEATItem # Description PA / PW / PT PAS / PWS / PTS

SSGBH-180160 497.00 497.00

SSC-180180 ---- 165.00

STSA-270155 ---- 298.50

** See matching Contour Shower Shelf (SCS-090090) below.

FINISH OPTIONS FOR CORNER SHELVESSS = Satin Stainless FinishPS = Polished Stainless FinishPC = Powder Coat Finish

CORNER SHOWER SHELVES

Item # Descriiption SS PS PC PAS / PWS / PTS

W-SC306-1406 Corner Shower Shelf, 14-1/8" W x 8-1/2" D with 14" Handle #304 Stainless Steel 123.90 149.80 134.10 -----

W-SC300-0909 Corner Shower Self with Rail, 13-1/4" W x 6-7/8" D#304 Stainless Steel 99.50 124.75 113.75 -----

720-9016 Rectangular Sundries Shelf with Rail, 16" W x 6-1/8" D#304 Stainless Steel 122.50 164.75 142.60 -----

SCS-090090Contour Shower Shelf, 12-5/8" W x 9" D, One-Piece Solid Phenolic available in

Almond (PAS), White (PWS), or Teak (PTS) with Standard Drain Slots, 18" RadiusClear Coated Aluminum Frame **

---- ---- ----- 98.95

** See matching Contour Shower Seat (SSC-180180) above.

---- Finish Options ---- ---- Shelf Top Material Options ----

Profile Bench Seat, Grab Bar (Hung with Backrest and Legs) 18" W x 20-5/8" D,1-1/4" O.D. Frame with Phenolic Almond (PA or PAS), White (PW or PWS) or Teak (PT or PTS) Seat Top

Satin SS Frame - 1 each GSS-180-QCR included with each Profile Shower Seat -

Contour Shower Seat 26-1/2" W x 16-1/2" D, One-Piece Solid Phenolic Seat Top available in Almond (PAS), White (PWS), or Teak (PTS) with Standard Drain Slots, 18" Radius

Clear Coated Aluminum Frame **Bridgeport Removable Tub Seat 27" x 15-1/2", One-Piece Solid Phenolic Seat Top available in

Almond (PAS), White (PWS), or Teak (PTS) with Standard Drain Slots, Adjustable Stabilizing Posts Satin SS Frame

----- Seat Top Material Options ------

PROFILE BENCH SEAT SSGBH-180160-PT

CONTOUR SHOWER SEAT SSC-180180-PWS

BRIDGEPORT REMOVABLE TUB SEAT STSA-270155-PWS

W-SC306-1406-PS

SCS-090090-PWS

W-SC300-0909-PS

720-9016-PS


20


CORONADO SERIES - GRAB BARS MADE IN THE USA

FINISH OPTIONS

SS = Satin Stainless Finish AL = Almond MB = Matte BlackPS = Polished Stainless Finish AW = Almond Wrinkle PB = Polished Brass

BI = Biscuit SN = Satin Nickel

Grab Bar Series Features:

BK = Black WT = White

* 304 Stainless SteelBR = Bronze WW = White Wrinkle

* Welded Construction* Custom finishes and colors available* 3" Round Concealed Flanges* Available in decorative flange designs

790 - 791 SERIES - CORONADOSS PS PC

790-180-QCR 18" Grab Bar, 1-1/4" O.D., Concealed Flanges 94.75 111.95 111.95790-240-QCR 24" Grab Bar, 1-1/4" O.D., Concealed Flanges 107.65 131.30 131.30790-360-QCR 36" Grab Bar, 1-1/4" O.D., Concealed Flanges 119.50 155.00 155.00790-420-QCR 42" Grab Bar, 1-1/4" O.D., Concealed Flanges 138.85 181.95 181.95

790-180-HCR 18" Grab Bar, 1-1/2" O.D., Concealed Flanges 107.65 123.80 123.80790-240-HCR 24" Grab Bar, 1-1/2" O.D., Concealed Flanges 122.70 146.40 146.40790-360-HCR 36" Grab Bar, 1-1/2" O.D., Concealed Flanges 135.65 172.20 172.20790-420-HCR 42" Grab Bar, 1-1/2" O.D., Concealed Flanges 159.30 202.35 202.35

SS PS PC

791-180-QCR 18" Grab Bar, 1-1/4" O.D., Concealed Flanges 118.40 139.95 139.95791-240-QCR 24" Grab Bar, 1-1/4" O.D., Concealed Flanges 134.60 154.60 154.60791-360-QCR 36" Grab Bar, 1-1/4" O.D., Concealed Flanges 148.55 193.75 193.75791-420-QCR 42" Grab Bar, 1-1/4" O.D., Concealed Flanges 172.20 226.05 226.05

OVAL SERIESSS PS PC

GSO-180-HCR 18" Oval Grab Bar - Mitred Corners, 1-1/2" O.D., Concealed Flanges 136.15 155.55 155.55GSO-240-HCR 24" Oval Grab Bar - Mitred Corners, 1-1/2" O.D., Concealed Flanges 149.05 174.90 174.90GSO-360-HCR 36" Oval Grab Bar - Mitred Corners, 1-1/2" O.D., Concealed Flanges 160.95 198.60 198.60GSO-420-HCR 42" Oval Grab Bar - Mitred Corners, 1-1/2" O.D., Concealed Flanges 180.30 225.50 225.50

NOTE: OVAL SERIES GRAB BARS AVAILABLE IN 1-1/2" O.D. ONLY

Item # Description

NOTE: 791 SERIES GRAB BARS AVAILABLE IN 1 1/4" O.D. ONLY

Item # Description

----------Finish Options ----------

----------Finish Options ----------

POWDER COAT (PC) OPTIONS

Item # Description

----------Finish Options ----------

All Coronado Series Grab Bars meet Federal Specification WW-P-541/8b for welded construction and withstanding

250 lbs. of force when properly installed.

790-240-QCR-PS

791-240-QCR-PS

GSO-240-HCR-PS

PC = Powder Coat Finish



OVAL SERIESSS PS PC

GSSO-180-HCR 18" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 125.40 144.80 144.80GSSO-240-HCR 24" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 138.30 164.20 164.20GSSO-360-HCR 36" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 150.15 187.85 187.85GSSO-420-HCR 42" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 169.55 214.75 214.75

SQUARE FLANGE GRAB BAR - SQUARE STEP FLANGE COVERSS PS PC

GXS2-180-QSS 18" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 136.15 155.55 155.55GXS2-240-QSS 24" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 149.05 174.90 174.90GXS2-360-QSS 36" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 160.95 198.60 198.60GXS2-420-QSS 42" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 180.30 225.50 225.50

Platinum Series Features: **PLATINUM FLANGE STYLE OPTIONS

* Traditional Grab Bar P1= Bevel Flange P6= Hexagon Flange* Heavy-Duty decorative Cast Stainless Steel Flanges P3= Halo Flange P7= Tapered Flange* Custom sizes, styles and finishes are available P4= Tri-Step Flange* Call for Quotation

PLATINUM - SERIESSS PS PC

GSS-180-Q ** 18" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 136.30 159.60 159.60GSS-240-Q ** 24" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 140.40 164.75 164.75GSS-360-Q ** 36" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 148.80 175.25 175.25GSS-420-Q ** 42" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 153.75 182.40 182.40GSS-480-Q ** 48" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 159.80 190.60 190.60

Item # Description

----------Finish Options ----------

Item # Description

----------Finish Options ----------

** DESIGNATE PLATINUM FLANGE STYLE. SEE PLATINUM FLANGE STYLE OPTIONS CHART.

----------Finish Options ----------

Item # Description


GXS2-240-QSS-PS

GSS-240-QP4-PS

GSS-240-QP6-PS

GSSO-240-QCR-PS

Bevel Halo Tri-Step

Hexagon Tapered


21



OVAL SERIESSS PS PC

GSSO-180-HCR 18" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 125.40 144.80 144.80GSSO-240-HCR 24" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 138.30 164.20 164.20GSSO-360-HCR 36" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 150.15 187.85 187.85GSSO-420-HCR 42" Oval Grab Bar - Coronado Style, 1-1/2" O.D., Concealed Flanges 169.55 214.75 214.75

SQUARE FLANGE GRAB BAR - SQUARE STEP FLANGE COVERSS PS PC

GXS2-180-QSS 18" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 136.15 155.55 155.55GXS2-240-QSS 24" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 149.05 174.90 174.90GXS2-360-QSS 36" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 160.95 198.60 198.60GXS2-420-QSS 42" Grab Bar, 1-1/4" O.D., Square Stainless Step Flanges 180.30 225.50 225.50

Platinum Series Features: **PLATINUM FLANGE STYLE OPTIONS

* Traditional Grab Bar P1= Bevel Flange P6= Hexagon Flange* Heavy-Duty decorative Cast Stainless Steel Flanges P3= Halo Flange P7= Tapered Flange* Custom sizes, styles and finishes are available P4= Tri-Step Flange* Call for Quotation

PLATINUM - SERIESSS PS PC

GSS-180-Q ** 18" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 136.30 159.60 159.60GSS-240-Q ** 24" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 140.40 164.75 164.75GSS-360-Q ** 36" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 148.80 175.25 175.25GSS-420-Q ** 42" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 153.75 182.40 182.40GSS-480-Q ** 48" Grab Bar, 1-1/4" O.D., Concealed Platinum Flange 159.80 190.60 190.60

Item # Description

----------Finish Options ----------

Item # Description

----------Finish Options ----------

** DESIGNATE PLATINUM FLANGE STYLE. SEE PLATINUM FLANGE STYLE OPTIONS CHART.

----------Finish Options ----------

Item # Description


GXS2-240-QSS-PS

GSS-240-QP4-PS

GSS-240-QP6-PS

GSSO-240-QCR-PS

Bevel Halo Tri-Step

Hexagon Tapered


22


BATH ACCESSORIES - 700 SERIES - CORONADO MADE IN THE USA

FINISH OPTIONS POWDER COAT (PC) OPTIONSSS = Satin Stainless Finish AL= Almond MB = Matte BlackPS = Polished Stainless Finish AW = Almond Wrinkle PB = Polished BrassPC = Powder Coat Finish BI= Biscuit SN = Satin Nickel

BK = Black WT = White700 Series Features: BR = Bronze WW = White Wrinkle* 3/4" Round Crosspiece* 1" Round Post FABRICATED OF TYPE 304, 18-8 ALLOY, STAINLESS STEEL

* 2-1/2" Round Concealed Flanges RATED TO EXCEED 100 LB LOAD CAPACITY WHEN PROPERLY INSTALLED

* Available in decorative step flange design

700 SERIES - CORONADOSS PS PC

Soap Holder (without holes), 4-5/16" Dia. Dish 49.45 55.10 55.10Toothbrush Tumbler Holder, 4-5/16" Dia. Dish 49.45 55.10 55.10Door Bumper, 1-1/2" Dia. x 3" D, Exposed Mounting Flange 36.75 40.35 40.35Door Bumper / Coat Hanger, 1-1/2" Dia. x 3-1/2" D, Exposed Mounting Flange 40.40 44.45 44.45

SS PS PC18" Towel Bar Set (3/4" Rd.), 18" Mounting Centers x 3-1/2" D 73.00 80.50 80.5018" Double Towel Bar Set (3/4" Rd.), 18" Mounting Centers x 6-3/4" D 91.95 99.40 99.4024" Towel Bar Set (3/4" Rd.), 24" Mounting Centers x 3-1/2" D 77.80 85.45 85.4524" Double Towel Bar Set (3/4" Rd.), 24" Mounting Centers x 6-3/4" D 97.30 105.05 105.0530" Towel Bar Set (3/4" Rd.), 30" Mounting Centers x 3-1/2" D 82.90 90.95 90.9536" Towel Bar Set (3/4" Rd.), 36" Mounting Centers x 3-1/2" D 89.80 98.25 98.25

SS PS PCSingle Paper Holder, White Roller, 6-1/4" Mounting Centers x 3-1/2" D 69.75 75.80 75.80

700-31-2 Double Paper Holder, White Roller, 12-1/2" Mounting Centers x 3-1/2" D 95.65 103.75 103.75700-33 "Post-Style" Single Paper Holder, 6" Center to End x 4-1/8" D 84.45 90.55 90.55700-33-2 "Post-Style" Double Paper Holder, 11-1/2" Overall x 4-1/8" D 99.00 107.10 107.10700-35 Rectangular Toilet Paper & Towel Holder, 6-1/2" W x 5-1/2" H x 3-3/8" D 71.30 78.20 78.20

700-2036

700-31Item # Description

700-10700-00

Item # Description

----------Finish Options ----------

----------Finish Options ----------

----------Finish Options ----------

700-2030700-2024-2700-2024700-2018-2700-2018

Item # Description

700-14700-13

700-00 700-10

700-2018 700-2030

700-31 700-33

700-33-2

700-2024-2 700-2024 700-2018-2

700-13 700-14

700-2036

700-31-2 700-35


23

FINISH OPTIONS POWDER COAT (PC) OPTIONSSS = Satin Stainless Finish AL = Almond MB = Matte BlackPS = Polished Stainless Finish AW = Almond Wrinkle PB = Polished BrassPC = Powder Coat Finish BI= Biscuit SN= Satin Nickel

BK= Black WT = WhiteBR = Bronze WW = White Wrinkle

SS PS PC700-40 Single Robe Hook, 2-1/2" W x 2-1/2" D 45.20 48.95 48.95700-40-2 Double Robe Hook, 3-1/2" W x 3-1/4" D 49.85 52.45 52.45700-46 Towel Ring, 6-3/8" Dia. x 2-1/2" D 58.95 65.00 65.00

SS PS PC

700-8018 18" Towel Shelf and Bar, 18" Mounting Centers x 9-1/4" D 107.35 117.60 117.60700-8024 24" Towel Shelf and Bar, 24" Mounting Centers x 9-1/4" D 112.30 126.20 126.20700-9018 18" Glass Shelf, 18" Mounting Centers x 9" D 236.00 249.80 249.80700-9024 24" Glass Shelf, 24" Mounting Centers x 9"D 245.30 263.35 263.35700-9124 24" Glass Shelf with Bar, 24" Mounting Centers x 9" D 270.55 288.55 288.55

SS PS PC

13-1/4" W x 6-7/8" D Triangular / Corner Shower Shelf with Rail 99.50 124.75 113.7516" W x 6-1/8" D Rectangular Sundries Shelf with Rail 122.50 164.75 142.60720-9016

W-SC300-0909

Item #

Item # Description----------Finish Options ----------

----------Finish Options ----------

Description

----------Finish Options ----------

Item # Description

700-40

700-8018

700-8024

700-9018 700-9124

700-9024

700-40-2 700-46

W-SC300-0909 720-9016

BATH ACCESSORIES - 700 SERIES - CORONADO


24




BK = Black WT = White711 Series Features: BR = Bronze WW = White Wrinkle* 7/8" round crosspiece* 7/8" round post FABRICATED OF TYPE 304, 18-8 ALLOY, STAINLESS STEEL

* 2-1/2" round concealed flanges RATED TO EXCEED 100 LB LOAD CAPACITY WHEN PROPERLY INSTALLED



Soap Dish Holder, 4-5/16" Dia. Dish 49.45 55.10 55.10Toothbrush Holder, 4-5/16" Dia. Dish 49.45 55.10 55.10Door Bumper, 1-1/2" Dia. x 3" D, Exposed Mounting Flange 36.75 40.35 40.35Door Bumper/Coat Hanger, 1-1/2" Dia. x 3" D, Exposed Mounting Flange 40.40 44.45 44.45

SS PS PC

18" Towel Bar Set, 18" Overall, 15" Mounting Centers 92.35 108.65 108.6524" Towel Bar Set, 24" Overall, 21" Mounting Centers 99.40 116.90 116.90

711-2030 30" Towel Bar Set, 30" Overall, 27" Mounting Centers 105.25 122.50 122.5036" Towel Bar Set, 36" Overall, 33" Mounting Centers 114.75 126.75 126.75

SS PS PC

Single Paper Holder, White Roller, 6-1/4" Mounting Centers x 3-1/2" D 69.75 75.80 75.80Double Paper Holder, White Roller, 12-1/2" Mounting Centers x 3-1/2" D 95.65 103.75 103.75Euro Paper Holder, 6" Center to End x 4-1/8" D 84.45 90.55 90.55Double Euro Paper Holder, 11-1/2" Overall x 4-1/8" D 99.00 107.10 107.10Toilet Paper Holder / Towel Ring, 6" W x 5-1/4" H x 3-3/8" D 71.30 78.20 78.20

SS PS PC

Single Robe Hook, 2-1/2" W x 2-1/2" D 45.20 48.95 48.95Double Robe Hook, 3-1/2" W x 3-1/4" D 49.85 52.45 52.45Towel Ring, 6-3/8" Dia. x 2-1/2" D 58.95 65.00 65.00

711-14

----------Finish Options ----------

----------Finish Options ----------

711-46

Item # Description

----------Finish Options ----------

----------Finish Options ----------

Item #

711-2018

711-2036

711-31711-31-2711-33711-33-2

711-00711-10711-13

711-35

711-41

Description

711-2024

Item # Description

Item # Description

711-40

711-00 711-10

711-2018 711-2024 711-2030 711-2036

711-31

711-31-2

711-33

711-35

711-40 711-46

711-13 711-14

711-41

711-33-2


25




BK = Black WT = White711 Series Features: BR = Bronze WW = White Wrinkle* 7/8" round crosspiece* 7/8" round post FABRICATED OF TYPE 304, 18-8 ALLOY, STAINLESS STEEL

* 2-1/2" round concealed flanges RATED TO EXCEED 100 LB LOAD CAPACITY WHEN PROPERLY INSTALLED



Soap Dish Holder, 4-5/16" Dia. Dish 49.45 55.10 55.10Toothbrush Holder, 4-5/16" Dia. Dish 49.45 55.10 55.10Door Bumper, 1-1/2" Dia. x 3" D, Exposed Mounting Flange 36.75 40.35 40.35Door Bumper/Coat Hanger, 1-1/2" Dia. x 3" D, Exposed Mounting Flange 40.40 44.45 44.45

SS PS PC

18" Towel Bar Set, 18" Overall, 15" Mounting Centers 92.35 108.65 108.6524" Towel Bar Set, 24" Overall, 21" Mounting Centers 99.40 116.90 116.90

711-2030 30" Towel Bar Set, 30" Overall, 27" Mounting Centers 105.25 122.50 122.5036" Towel Bar Set, 36" Overall, 33" Mounting Centers 114.75 126.75 126.75

SS PS PC

Single Paper Holder, White Roller, 6-1/4" Mounting Centers x 3-1/2" D 69.75 75.80 75.80Double Paper Holder, White Roller, 12-1/2" Mounting Centers x 3-1/2" D 95.65 103.75 103.75Euro Paper Holder, 6" Center to End x 4-1/8" D 84.45 90.55 90.55Double Euro Paper Holder, 11-1/2" Overall x 4-1/8" D 99.00 107.10 107.10Toilet Paper Holder / Towel Ring, 6" W x 5-1/4" H x 3-3/8" D 71.30 78.20 78.20

SS PS PC

Single Robe Hook, 2-1/2" W x 2-1/2" D 45.20 48.95 48.95Double Robe Hook, 3-1/2" W x 3-1/4" D 49.85 52.45 52.45Towel Ring, 6-3/8" Dia. x 2-1/2" D 58.95 65.00 65.00

711-14

----------Finish Options ----------

----------Finish Options ----------

711-46

Item # Description

----------Finish Options ----------

----------Finish Options ----------

Item #

711-2018

711-2036

711-31711-31-2711-33711-33-2

711-00711-10711-13

711-35

711-41

Description

711-2024

Item # Description

Item # Description

711-40

711-00 711-10

711-2018 711-2024 711-2030 711-2036

711-31

711-31-2

711-33

711-35

711-40 711-46

711-13 711-14

711-41

711-33-2



BK = Black WT = White740 Series Features: BR = Bronze WW = White Wrinkle* 1-1/4" x 1/4" crosspiece* 1-1/4" x 3/4" post FABRICATED OF TYPE 304, 18-8 ALLOY, STAINLESS STEEL

* Custom finishes and colors available RATED TO EXCEED 100 LB LOAD CAPACITY WHEN PROPERLY INSTALLED


Wall Mounted Soap Holder, 4" W x 4" D 118.75 133.85 133.85

SS PS PC18" Towel Bar, 18" Overall, 17-1/4" Mounting Centers 242.45 275.30 275.3024" Towel Bar, 24" Overall, 23-1/4" Mounting Centers 265.25 296.80 296.80

SS PS PC740-33 Single Toilet Paper Holder, 5-1/2" W x 3-1/4" D 138.75 151.10 151.10

Double Toilet Paper Holder, 10-3/4" W x 3-1/4" D 213.15 231.40 231.40Robe Hook, 3/4" W x 1-1/2" D 93.50 99.80 99.80Towel Ring, 6-3/8" Dia. x 2-3/8" D 118.75 133.90 133.90

Description

CUSTOM CORONADO DESIGNS ARE AVAILABLE - FABRICATED TO YOUR SPECIFICATIONS -

CALL SEACHROME AT 800-955-2476 FOR A CONSULTATION WITH OUR DESIGN ENGINEER TEAM

740-33-2740-40740-46

Description

Item # Description

Item #----------Finish Options ----------

Item #740-00

740-2018740-2024

----------Finish Options ----------

----------Finish Options ----------

740-00

740-2018 740-2024

740-33-2 740-40 740 33 740-46



26


BATH ACCESSORIES - AMERICANA - CONTEMPORARY

300 Series Features:* Made in the USA* 304 Stainless Steel, Welded Construction, Satin Finish* 3/4" Round Crosspiece* 1" Post* 2-1/2" Welded, Concealed Flanges

300 SERIES - AMERICANA

300-2018-SS

5000 SERIES - CONTEMPORARY

SCM-P5050

SCM-P5118 18" Towel Bar Set (3/4" Sq.), 18" Mounting Centers x 3" D, Concealed Screw MountingSCM-P5124

SCM-P5360 Wall Mounted Soap Holder, 4-1/4" W x 3-1/4" D, Concealed Screw Mounting

SCM-P5860 Towel Ring with Aluminum Ring, 6" Dia. x 3-3/8" D, Concealed Screw MountingSCM-P5500

300-33-SS

300-46-SS

24" Towel Bar Set (3/4" Sq.), 24" Mounting Centers x 3" D, Concealed Screw Mounting30" Towel Bar Set (3/4" Sq.), 30" Mounting Centers x 3" D, Concelaed Screw Mounting

Wall Mounted Toothbrush Holder, 4-1/4" W x 3-1/4" D, Concealed Screw Mounting

Towel Ring with Clear Acrylic Ring, 6" Dia. x 3-3/8" D, Concealed Screw Mounting

Double Robe Hook, 2-3/8" W x 1-3/4" D, Concealed Screw Mounting

50.7554.00

31.45

8.9010.05

Single Paper Holder with Plastic Spring Loaded White Roller, 7-1/2" W x 3" D, Concealed Screw Mounting

41.00

DescriptionSingle Toilet Paper Holder, 6" Center to End x 4" D

Towel Ring, 6-3/8" Dia. x 2-1/2" D

18" Towel Bar, 18" Mounting Centers x 4" D 47.50

Item # SS55.00

10.50

4.90

SCM-P5130

SCM-P5030

24" Towel Bar, 24" Mounting Centers x 4" D

SCM-P5340

Die Cast Zinc Alloy Chrome Plated4.00

8.55

7.30

7.10

Item # Description

300-2024-SS300-2030-SS

300-40-SS

30" Towel Bar, 30" Mounting Centers x 4" D

Single Paper Holder with Plastic Spring Loaded Chrome Roller, 7-1/2" W x 3" D, Concealed Screw Mounting

SCM-P5080

Robe Hook, 2-1/2" W x 3" D

5.85

8.35

300-33-SS

300-46-SS

300-2018-SS 300-2024-SS 300-2030-SS

300-40-SS

SCM-P5030

SCM-P5050 SCM-P5080

SCM-P5118 SCM-P5124 SCM-P5130

SCM-P5340

SCM-P5500 SCM-P5860 SCM-P5360


900 SERIES - ECONOMY

1-3/8" Mounting Centers x 1-1/2" D, Exposed Screw Mounting

SCM-908 Metal Paper Holder with Plastic Spring Loaded White Roller, 1-1/4" Mounting Centers x 2-3/4" D, Exposed Screw Mounting

SCM-910A18 18" Towel Bar Set (5/8" Sq.), 18" Mounting Centers x 2-3/4" D, Exposed Screw MountingSCM-910A24

SCM-950 Metal Towel Ring with Clear Acrylic Ring, 5-7/8" W x 1-7/8" D, Exposed Screw Mounting

6.90

Item # DescriptionDie Cast Zinc Alloy Chrome

PlatedSCM-902 Metal Single Robe Hook, 2.60

5.20

7.55

SCM-934 4.25

Die Cast Zinc Alloy Chrome Plated

5.10

1-1/4" Mounting Centers x 2-3/4" D, Exposed Screw Mounting (Pair)

SCM-936 Metal Soap Holder, 3-7/8" W x 3-1/4" D, Exposed Screw Mounting 5.10


Plated

SCM-910 Metal 5/8" Square Towel Bar Posts Only, 4.70

24" Towel Bar Set (5/8" Sq.), 24" Mounting Centers x 2-3/4" D, Exposed Screw Mounting

Metal Toothbrush Holder, 3-7/8" W x 3-1/4" D, Exposed Screw Mounting

Item # Description

SCM-902 SCM-910 SCM-908

SCM-934 SCM-936

SCM-910A18 SCM-910A24

SCM-950

BATH ACCESSORIES - ECONOMY


27


900 SERIES - ECONOMY

1-3/8" Mounting Centers x 1-1/2" D, Exposed Screw Mounting

SCM-908 Metal Paper Holder with Plastic Spring Loaded White Roller, 1-1/4" Mounting Centers x 2-3/4" D, Exposed Screw Mounting

SCM-910A18 18" Towel Bar Set (5/8" Sq.), 18" Mounting Centers x 2-3/4" D, Exposed Screw MountingSCM-910A24

SCM-950 Metal Towel Ring with Clear Acrylic Ring, 5-7/8" W x 1-7/8" D, Exposed Screw Mounting

6.90


PlatedSCM-902 Metal Single Robe Hook, 2.60

5.20

7.55

SCM-934 4.25

Die Cast Zinc Alloy Chrome Plated

5.10

1-1/4" Mounting Centers x 2-3/4" D, Exposed Screw Mounting (Pair)

SCM-936 Metal Soap Holder, 3-7/8" W x 3-1/4" D, Exposed Screw Mounting 5.10


Plated

SCM-910 Metal 5/8" Square Towel Bar Posts Only, 4.70

24" Towel Bar Set (5/8" Sq.), 24" Mounting Centers x 2-3/4" D, Exposed Screw Mounting

Metal Toothbrush Holder, 3-7/8" W x 3-1/4" D, Exposed Screw Mounting

Item # Description

SCM-902 SCM-910 SCM-908

SCM-934 SCM-936

SCM-910A18 SCM-910A24

SCM-950

BATH ACCESSORIES - ECONOMY


28

BATH ACCESSORIES - 15000 SERIES STAINLESS

FABRICATED OF TYPE 304, 18-8 ALLOY, STAINLESS STEELFOR HOTEL / MOTEL, HEALTHCARE, HOSPITALS,GOVERNMENT & COMMERCIAL PROJECTS

15000 SERIES - STAINLESS Case Qty Lbs / Case SS PS

15600 50 22 13.30 13.304-1/4" W x 2-1/8" H x 4-1/4" D

15601 50 21 13.30 13.304-1/4" W x 2-1/8" H x 4-1/4" D

15610 50 18 12.80 15.10

Case Qty Lbs / Case SS PS15620-18SQ 100 75 27.00 27.0015620-24SQ 100 84 29.15 29.1515620-30SQ 100 89 31.50 31.50

Case Qty Lbs / Case SS PS

15631 60 35 21.20 21.20

15631-2 40 34 28.40 28.40

15640 50 11 8.60 8.60

15641 50 15 9.50 9.50

15642 50 16 9.00 9.0015643 50 24 ---- 24.0015646 50 22 12.80 19.70

-----Finish Options-----



Item # Description

SS = Satin Stainless FinishPS = Polished Stainless Finish

Item # Description

FINISH OPTIONS

Item # Description

30" Towel Bar Set (3/4" Sq.), 30" End to End

Soap Holder without drain holes

Soap Holder with drain holes

4-1/4" W x 2" H x 4" D

18" Towel Bar Set (3/4" Sq.), 18" End to End24" Towel Bar Set (3/4" Sq.), 24" End to End

Toothbrush / Tumbler Holder

Double Robe Hook, 4" W x 1-3/4" D

Towel Pin, 2" W x 4-1/2" DHat and Robe Hook, 2" W x 6-1/4" H x 4" DTowel Ring, 5-3/8" Dia. x 2-3/8" D

Single Paper Holder, Plastic Spring LoadedWhite Roller, 7-1/2" W x 2" H x 3-7/8" DDouble Paper Holder, Plastic Spring Loaded White Roller, 13" W x 2" H x 3-7/8" DSingle Robe Hook, 2" W x 1-9/16" D

15600 15601 15610

15620-SQ-Series

15620-RD-Series

15910-24

15631

15631-2

15640

15641

15642

15643

15646

15620-18RD 100 68 26.50 26.5015620-24RD 100 75 27.60 27.6015620-30RD 100 82 28.90 28.9015910-24 20 41 62.15 62.15

18" Towel Bar Set (3/4" Rd.), 18" End to End24" Towel Bar Set (3/4" Rd.), 24" End to End30" Towel Bar Set (3/4" Rd.), 30" End to End24" Towel Shelf with Bar, 24" End to End x 8-3/4" D


----- Case -----

Item# Detail Comparables Qty Price/each

SCAL-124

#304 Satin StainlessOverall: 8-1/4" W x 4-3/4"" H x 3-3/4"" D

Capacity: 40 Ounces

#2112-BOB6542-BRAD0345-ASI

24 50.45

SCAL-126

#304 Satin StainlessOverall: 4-3/4" W x 8-1/4" H x 3-3/4" D

Capacity: 40 Ounces

#2111-BOB#6562-BRAD#0347-ASI

24 50.45

----- Case -----


SCAL-112

Cast Aluminum / Paint Color-SilverNo Waste - Rocking Action Plastic Spindles

Overall : 13-1/8" W x1-3/4" H x 4" DCapacity : 2 Standard Rolls Toilet Tissue

#274-BOB#5241-BRAD #0264-1-ASI

21 24.20

SCAL-113

#304 Satin Stainless Steel / 2 Plastic RollersOverall: 14-3/4" W x 4-1/8" H x 5-1/16" DCapacity: 2 Standard Rolls Toilet Tissue

#2840-BOB#-------BRAD #-------ASI

12 87.80

SCAL-188

#304 Satin Stainless Steel / 2 Plastic RollersAuto Drop Down

Overall : 6" W x11" H x 5-3/4" DCapacity : 2 Standard Rolls Toilet Tissue

#2888-BOB#5402-BRAD#9030-ASI

12 118.80

----- Case -----


SCAL-130

#304 Satin Stainless Steel Overall: 15-5/8" W x 11-1/2" H x 1-7/8" D

Capacity: 500 Single or Half Fold Seat Covers

#221-BOB#5831-BRAD#4775M-ASI

12 48.50

SCAL-170

#304 Satin Stainless SteelOverall: 8" W x 11" H x 4" D

Capacity: 1 Gallon Receptacle

#270-BOB#4781-15-BRAD #852-ASI

12 55.65

SCAL-162#304 Satin Stainless Steel

Overall: 11-1/4" W x 14-1/2" H x 4-1/8" DCapacity: 400 C-Fold / 525 Multi-Fold Paper Towels

#262-BOB#250-15-BRAD#210-ASI

6 62.95

Wall-Mount Dual Toilet Tissue Dispenser with Utility Shelf

36

Locking Surface-Mount Dual Roll Toilet Tissue Dispenser

24

CAL SERIES - COMMERCIAL ACCESSORY LINE - WASHROOM

Description Lbs/Case

Horizontal Wall-Mount Liquid Soap Dispenser

17

Vertical Wall-Mount LiquidSoap Dispenser

17


Wall-Mount Dual Toilet Tissue Dispenser 12

Surface Mount Sanitary Napkin Disposal

18

Locking Wall-Mount Paper Towel Dispenser 13


Wall-Mount Toilet Seat Cover Dispenser

15

SCAL-162 SCAL-170

SCAL-124

SCAL-112

SCAL-126

SCAL-188

SCAL-130

SCAL-113


29


----- Case -----


SCAL-124

#304 Satin StainlessOverall: 8-1/4" W x 4-3/4"" H x 3-3/4"" D

Capacity: 40 Ounces

#2112-BOB6542-BRAD0345-ASI

24 50.45

SCAL-126

#304 Satin StainlessOverall: 4-3/4" W x 8-1/4" H x 3-3/4" D

Capacity: 40 Ounces

#2111-BOB#6562-BRAD#0347-ASI

24 50.45

----- Case -----


SCAL-112

Cast Aluminum / Paint Color-SilverNo Waste - Rocking Action Plastic Spindles

Overall : 13-1/8" W x1-3/4" H x 4" DCapacity : 2 Standard Rolls Toilet Tissue

#274-BOB#5241-BRAD #0264-1-ASI

21 24.20

SCAL-113

#304 Satin Stainless Steel / 2 Plastic RollersOverall: 14-3/4" W x 4-1/8" H x 5-1/16" DCapacity: 2 Standard Rolls Toilet Tissue

#2840-BOB#-------BRAD #-------ASI

12 87.80

SCAL-188

#304 Satin Stainless Steel / 2 Plastic RollersAuto Drop Down

Overall : 6" W x11" H x 5-3/4" DCapacity : 2 Standard Rolls Toilet Tissue

#2888-BOB#5402-BRAD#9030-ASI

12 118.80

----- Case -----


SCAL-130

#304 Satin Stainless Steel Overall: 15-5/8" W x 11-1/2" H x 1-7/8" D

Capacity: 500 Single or Half Fold Seat Covers

#221-BOB#5831-BRAD#4775M-ASI

12 48.50

SCAL-170

#304 Satin Stainless SteelOverall: 8" W x 11" H x 4" D

Capacity: 1 Gallon Receptacle

#270-BOB#4781-15-BRAD #852-ASI

12 55.65

SCAL-162#304 Satin Stainless Steel

Overall: 11-1/4" W x 14-1/2" H x 4-1/8" DCapacity: 400 C-Fold / 525 Multi-Fold Paper Towels

#262-BOB#250-15-BRAD#210-ASI

6 62.95

Wall-Mount Dual Toilet Tissue Dispenser with Utility Shelf

36

Locking Surface-Mount Dual Roll Toilet Tissue Dispenser

24

CAL SERIES - COMMERCIAL ACCESSORY LINE - WASHROOM


Horizontal Wall-Mount Liquid Soap Dispenser

17

Vertical Wall-Mount LiquidSoap Dispenser

17


Wall-Mount Dual Toilet Tissue Dispenser 12

Surface Mount Sanitary Napkin Disposal

18

Locking Wall-Mount Paper Towel Dispenser 13


Wall-Mount Toilet Seat Cover Dispenser

15

SCAL-162 SCAL-170

SCAL-124

SCAL-112

SCAL-126

SCAL-188

SCAL-130

SCAL-113


30


CONSULT FACTORY FOR ADDITIONAL ITEMS NOT SHOWN

Item # Qty Lbs / Ea. Price

15820-18-PS 1 8 132.90

15820-24-PS 1 10 146.15

SCM-R5519 10 3 79.60

15840-30-SS 1 15 259.95

15840-31-SS 1 15 307.80


SCA-U811 48 1 18.75

SCA-U812 24 2 34.10

SCA-U813 1 2 35.85

SCA-U814 1 4 47.50

CAL SERIES - COMMERCIAL ACCESSORY LINE - HOSPITALITY

Classic Surface Mount Double Paper Holder, Controlled Release12-1/4" W x 2-3/4" H x 4-1/4" D / Chrome Plated

Premiere Surface Mount Single Paper Holder - Concealed Hinge, Controlled Release5-1/2" W x 2-3/4" H x 4-1/4" D / Chrome Plated

-- Case --

-- Case --

24" Towel Shelf with Bar and Support Brackets, 24" Mounting CentersChrome Plated Brackets, Polished SS Rods

18" Heavy Duty Towel Shelf with Bar, 18" Mounting Centers - #304 StainlessHeliarc Welded / Polished SS

24" Heavy-Duty Towel Shelf with Bar, 24" Mounting Centers - #304 StainlessHeliarc Welded / Polished SS

30" Sturdy Towel Shelf with Robe Hook Rack, 29" Mounting Centers30" W x 8" H x 12" D - # 304 Stainless / Satin SS

Description

30" Sturdy Towel Shelf, 29" Mounting Centers30" W x 8" H x 12" D - # 304 Stainless / Satin SS

CUSTOM TOWEL SHELF DESIGNS & FINISHES AVAILABLE. CALL FOR A QUOTATION.

Classic Surface Mount Single Paper Holder, Controlled Release6" W x 2-3/4" H x 4-1/4" D / Chrome Plated

Premiere Surface Mount Double Paper Holder - Concealed Hinge, Controlled Release10-1/2" W x 2-3/4" H x 4-1/4" D / Chrome Plated

Description

SCA-U811

SCA-U812

SCA-U813

SCA-U814

SCM R5519

15820-18-PS 15820-24-PS

15840-30-SS




SCM-RR120CH 24 1 17.25

SCM-RR5506HD 60 1 41.35


SCM-5520NC 24 1 21.65

SCM-RR5520SS 25 1 36.15Recessed Facial Tissue Box with Stainless CoverWall Opening 10-1/2" W x 5" H x 2-1/4" D

Recessed Facial Tissue Box - No CoverWall Opening 10-1/2" W x 5" H x 2-1/4" D

Description


-- Case --

Description

Liquid Soap Dispenser - Wall Mount - Chrome with Plastic Globe3-5/8" W x 6-3/4" H x 5-3/8" DRetractable Clothesline with 10' Spring Loaded Nylon Cord, 3-5/8" Dia. x 3-1/4" DChrome Plated Cover and Flange

-- Case --

SCM-RR120CH SCM-RR5506HD

SCM-5520NC SCM-RR5520SS


31




SCM-RR120CH 24 1 17.25

SCM-RR5506HD 60 1 41.35


SCM-5520NC 24 1 21.65

SCM-RR5520SS 25 1 36.15Recessed Facial Tissue Box with Stainless CoverWall Opening 10-1/2" W x 5" H x 2-1/4" D

Recessed Facial Tissue Box - No CoverWall Opening 10-1/2" W x 5" H x 2-1/4" D

Description


-- Case --

Description

Liquid Soap Dispenser - Wall Mount - Chrome with Plastic Globe3-5/8" W x 6-3/4" H x 5-3/8" DRetractable Clothesline with 10' Spring Loaded Nylon Cord, 3-5/8" Dia. x 3-1/4" DChrome Plated Cover and Flange

-- Case --

SCM-RR120CH SCM-RR5506HD

SCM-5520NC SCM-RR5520SS


32


PRICES DO NOT INCLUDE MOUNTING CLAMP

MOUNTING CLAMP SOLD SEPARATELY

----- Case -----

Item # Qty Price

SCM-5571 20 40.45

SCM-5577 20 72.40

SCM-R5580 24 41.25

----- Case -----

Item # Qty Price

660L-PS 40 34.10

681-PS 40 34.10

MOUNTING CLAMP ----- Case -----

Item # Qty Price

692 Mounting Clamp with Retention Spring, 7" W x 1-1/2" H x 4-5/8" D - - - 6.40

Double Surface Paper Holder - Plastic, Spring Loaded Chrome Rollers Chrome Plated Brackets, 13" W x 2-1/2" H x 3-1/8" D

Lbs / Ea.

1

Description

Description

Wall Opening 5-1/4" Sq. x 2" D - #304 Stainless / Polished SS


Paper Holder - Plastic, Spring Loaded White Roller, 6-1/4" Sq. x 2" D

Soap or Tumbler Holder with Metal Lip, 6-1/4" Sq. x 2" DWall Opening 5-1/4" Sq. x 2" D - #304 Stainless / Polished SS

Lbs / Ea.

1

1

2

Lbs / Ea.

Extra Roll Recessed Paper Holder - Plastic, Spring Loaded White Roller Chrome Trim, Wall Opening 5-1/4" Sq. x 4" D 2

Double Recessed Paper Holder - Plastic, Spring Loaded Chrome RollersWall Opening 11-1/4" W x 5-1/4" H x 1-3/4" D 4

Description

660L-PS 681-PS

SCM-5571 SCM-5577 SCM-R5580

692


33


CAL SERIES - MEDICINE CABINETS & MIRRORS MADE IN THE USA


PRICES SUBJECT TO CHANGEAll mirrors meet Federal Specification #DDM-411, Style "E" = #400 Stainless Steel Frame Grade 2 = Channel Frame

MIRRORSItem# Qty Lbs / Ea. Price

W-M100-1824 1 12 105.00W-M100-1830 1 15 121.00W-M100-1836 1 25 139.50W-M100-2430 1 22 143.50W-M100-2436 1 28 166.00

W-M190T-1824 1 15 186.50W-M190T-1830 1 18 199.00W-M190T-1836 1 29 219.50W-M190T-2430 1 25 225.50W-M190T-2436 1 32 246.00

W-M900-1824 Angle Frame Mirror, 18" x 24" overall 1 13 199.00W-M900-1830 Angle Frame Mirror, 18" x 30" overall 1 17 225.50W-M900-1836 Angle Frame Mirror, 18" x 36" overall 1 29 252.50W-M900-2430 Angle Frame Mirror, 24" x 30" overall 1 25 264.50W-M900-2436 Angle Frame Mirror, 24" x 36" overall 1 34 293.00

W-M990-1824 Angle Frame Mirror - Fixed Tilt, 18" x 24" overall 1 18 258.50W-M990-1830 Angle Frame Mirror - Fixed Tilt, 18" x 30" overall 1 22 336.50W-M990-1836 Angle Frame Mirror - Fixed Tilt, 18" x 36" overall 1 32 361.00W-M990-2430 Angle Frame Mirror - Fixed Tilt, 24" x 30" overall 1 29 371.00W-M990-2436 Angle Frame Mirror - Fixed Tilt, 24" x 36" overall 1 35 390.00

MEDICINE CABINETSItem# Qty Lbs / Ea. Price

WC-468-BCBP2 2 6 110.50

WC-452-SM 2 6 312.75Polished Stainless Steel Frame / White Powder Coat Cabinet

WC-461-P24CH 1 15 390.75

WC-781045 1 12 80.00Polished Stainless Steel Frame / White Polyethylene Cabinet

WC-781021 1 12 70.50Polished Stainless Steel Frame / White Polyethylene Cabinet

WC-62-1-26-01 1 15 109.85Bright Chrome Frame Finish / White Polyethylene Cabinet

WC-62-1-26-01SM 1 19 213.50Bright Chrome Frame Finish / White Polyethylene Cabinet with 93-0-24-01 Frame

----- Case -----

ORDERS FOR LESS THAN 10 UNITS WILL BE SUBJECT TO A CUSTOM CRATE CHARGE.

Surface Mount Medicine Cabinet, 16" x 26", 6 Split Shelves

Polished Stainless Steel Frame / White Powder Coat Cabinet

Polished Stainless Steel Frame / White Powder Coat Cabinet

Description

Surface Mount Medicine Cabinet, 16" x 22", 2 Adjustable Metal Shelves,

Recessed Medicine Cabinet - Reversible - 18" x 26", 3 Adjustable Glass Shelves,

Recessed Medicine Cabinet, 16" x 26", 3 Fixed Plastic Shelves

Recessed Medicine Cabinet, 16" x 22", 2 Fixed Plastic Shelves

Recessed Medicine Cabinet, 16" x 26", 6 Split Shelves

Channel Frame Mirror, 18" x 24" overallDescription

Channel Frame Mirror, 18" x 30" overallChannel Frame Mirror, 18" x 36" overall

----- Case -----

Channel Frame Mirror - Adjustable Tilt, 18" x 36" overallChannel Frame Mirror - Adjustable Tilt, 24" x 30" overallChannel Frame Mirror - Adjustable Tilt, 24" x 36" overall

Recessed Medicine Cabinet, 16" x 26", 2 Adjustable Metal Shelves,

Channel Frame Mirror, 24" x 30" overallChannel Frame Mirror, 24" x 36" overall

Channel Frame Mirror - Adjustable Tilt, 18" x 24" overallChannel Frame Mirror - Adjustable Tilt, 18" x 30" overall

CHANNELFRAMEMIRROR

CHANNELFRAMEADJUSTABLETILTMIRROR

ANGLEFRAMEMIRROR

ANGLEFRAMEMIRRORFIXEDTILT


34


PAYMENT ADJUSTMENTS AND BUYER REMEDIES

FREIGHT TERMSAll orders F.O.B. Long Beach, CA.

DELAYS

MINIMUM ORDER

ORDER REQUIREMENTS

CANCELLATIONS

RETURNS

RIGHT TO REFUSE TO MAKE SHIPMENT

CLAIMS

LIMITED WARRANTY

PRODUCT CARE

All claims for defective workmanship or material must be made within 30 days after claim arises and must be in writing. Seachrome excludes any warranty of fitness for a particular purpose. Buyer's exclusive remedy for the furnishing of materials not conforming to any contract shall be at Seachrome's option to secure the replacement thereof or payment of the claim, which shall not exceed the price of the sale in respect of which such claim is made. In no event shall Seachrome be liable for any special, indirect, incidental or consequential damages.

All telephone orders must be confirmed in writing. Seachrome will not assume errors in telephone orders unless written or faxed confirmation is received.

Returns will only be accepted with written authorization. A 30% restocking charge shall be assessed on all returns. A Return Merchandise Authorization (RMA) number must accompany all returned goods. All returned goods are to be shipped to Seachrome prepaid.

Claims for shortage, loss, or damage in transit must be submitted within 48 hours of delivery.

All Seachrome products will be replaced within one year of shipment if defective in workmanship or material. Seachrome will not be liable for any labor, damage or other expense of any kind incurred in connection with the sale or use of Seachrome products. There is no warranty as to the durability of finishes.

TERMS AND CONDITIONS

CREDIT POLICYInitial orders for new accounts are cash or credit card with order. Accounts not paid by the due date will be charged an administrative late charge at the rate of one and one-half percent (1-1/2%) per month, applied against the previous balance after deducting payments and credits received prior to the due date. Buyer acknowledges that Seachrome will incur losses not easily ascertainable in advance in the event of late payment by Buyer, and Buyer agrees to pay such late fee in order to compensate Seachrome for such damages as it may sustain. If it is necessary to employ an attorney or incur any other cost to collect this account, Buyer shall pay all fees and costs in addition to any amounts due hereunder. Should any portion of Buyer's account become past due, Seachrome shall have the right to declare all invoices due and payable.

Seller may, at any time, decline to make any shipment or delivery or perform any work except upon receipt of full cash payment.

Orders shall not be cancelled except upon mutual agreement. Orders for custom merchandise cannot be cancelled.

Every order is accepted subject to, and Seller is excused for a delay in performance caused by accidents, strikes, riots, labor stoppage, car shortage, climate conditions, unavoidable casualties, or other causes interfering, obstructing or blocking the usual routes of transportation, whether similar or dissimilar to those mentioned above, and no claim for loss or damages shall be allowed Buyer in consequence thereof. Seller may rescind any order without liability after acceptance for any of said causes.

The durability of finishes can be preserved by cleaning only with a wet soft cloth or ammonia cleaner. No chlorine cleaners or abrasives. No guarantee is given as to custom finish items.

NET 30 DAYS. All accounts, payable in U.S. funds, are due within 30 days after delivery of goods to Buyer or any common or contract carrier, whichever occurs first. Payments by check, draft, or any mode other than cash is conditional and for Buyer's convenience and is not deemed payment until cash or solvent credit is received and accepted by Seachrome.

Minimum order requirement is $50.00. Any order received for merchandise with a net amount less than $50.00 will be invoiced at $50.00, plus any applicable freight charges.

Shipments consigned outside the continental U.S. will be shipped to the nearest U.S. port. Prepaid freight terms may vary on a product-by-product basis. Please call the factory for freight terms on your particular order.

Our Commitment To Your Success..... Seachrome owes much of its success to the personal rela8onships we’ve created with our customers. For over 50 years, we’ve proven our commitment to your success by providing world-‐class manufacturing and the highest quality standards, along with unparalleled customer service in ADA bath accessories to the OEM, hospitality, ins8tu8onal, and assisted-‐living markets. Our all-‐American approach to innova8on in design, and commitment to excellence in produc8on and service, means our work exceeds the standards set for bath products that serve special health needs. And our exper8se in the guidelines set by the Americans with Disabili8es Act is incorporated into our en8re Signature Series of grab bars and accessibility seats…assuring safety and security with our “Made in the USA” pride in every product we manufacture. We've incorporated this same philosophy into our Lifestyle & Wellness® Series, where sleek and unique designs combine style with stability in every accessibility product we offer. Addi8onally, we see ourselves as an extension of your company – as your partner in business. Everything we do is focused on providing personalized service to every customer…star8ng with careful aWen8on to detail in concept and design on custom products, through tooling and produc8on, to on-‐8me delivery with every order. In a world where everyone is constantly striving to be beWer…Seachrome is dedicated to being the best. Thank you to all our loyal customers for your partnership.

C A Pulone Chris Pulone President


Our Commitment To Your Success..... Seachrome owes much of its success to the personal rela8onships we’ve created with our customers. For over 50 years, we’ve proven our commitment to your success by providing world-‐class manufacturing and the highest quality standards, along with unparalleled customer service in ADA bath accessories to the OEM, hospitality, ins8tu8onal, and assisted-‐living markets. Our all-‐American approach to innova8on in design, and commitment to excellence in produc8on and service, means our work exceeds the standards set for bath products that serve special health needs. And our exper8se in the guidelines set by the Americans with Disabili8es Act is incorporated into our en8re Signature Series of grab bars and accessibility seats…assuring safety and security with our “Made in the USA” pride in every product we manufacture. We've incorporated this same philosophy into our Lifestyle & Wellness® Series, where sleek and unique designs combine style with stability in every accessibility product we offer. Addi8onally, we see ourselves as an extension of your company – as your partner in business. Everything we do is focused on providing personalized service to every customer…star8ng with careful aWen8on to detail in concept and design on custom products, through tooling and produc8on, to on-‐8me delivery with every order. In a world where everyone is constantly striving to be beWer…Seachrome is dedicated to being the best. Thank you to all our loyal customers for your partnership.

C A Pulone Chris Pulone President

1906 East Dominguez Street, Long Beach, CA 90810Phone: 310-427-8010 / 800-955-2476

Fax: 310-427-8005 / 800-444-3380www.seachrome.com

LIST PRICE SHEET - Seachrome...CAL Series - Medicine Cabinets & Mirrors 33 Terms and Conditions 34...

Documents

Transcript of LIST PRICE SHEET - Seachrome...CAL Series - Medicine Cabinets & Mirrors 33 Terms and Conditions 34...