ÖLFLEX-SERVO-FD 785 P / 785 CP - RS Components · ÖLFLEX-SERVO-FD® 785 P / 785 CP The...
2
DNC motors, frequency con- verters ÖLFLEX-SERVO-FD ® 785 P / 785 CP The superflexible motor supply cable 0,6/1 kV for use in power chains, halogen free. Now in DESINA ® conform version. Application ÖLFEX-SERVO-FD ® 785 P/785 CP cables, especially designed to connect servo motors, for continuously flexible applications like in power chains. The screened version, due to its EMC compliance, is mainly used as connection cable between frequency con- verters and servo motors. Special Feature Drastically reduced minimum bending radii due to optimised design and smallest space requirements. Outer diameter, in particular the -785 CP ver- sion, is qualified for a service life of max. 5 million alternat- ing bending cycles in power chains for travel distance up to 100m, materials halogen-free, cold-flexible down to -40°C, outdoor use, the oil-resistant PUR outer sheath is flame- retardant and not adhesive. Note Please observe the assembly guidelines for ÖLFLEX-FD ® and UNITRONIC-FD ® cables in power chain systems page T3. The product is conform to EEC directive 73/23 (Low Voltage Directive)CE. Further cables for power chains selection table highly flexible FD cables see page A2. ÖLFLEX-FD ® 785P/CP is proved for power chains with long travel lengths. For higher temperatures we rec- ommend to use LAPPTHERM ® 105 FD page 3.4 LAPPTHERM ® 105 FD + C page 3.4. DESINA ® conform cables with orange outer sheath. Cable Make-up ÖLFLEX-SERVO-FD ® 785 P Extra fine strands of plain copper wires, core insulation based on TPE, cores black with white numbers, one core green-yellow as protective conductor, cores twisted in extremely short lay lengths, fleece wrapping, outer sheath polyurethane compound, hal- ogen-free, silver-grey (RAL 7001), flame-retardant (IEC 60332.1). ÖLFLEX-SERVO-FD ® 785 CP Extra fine strands of plain copper wires, core insulation based on TPE, cores black with white numbers, one core green-yellow as protective con- tuctor, cores twisted with polyester fibres in extremely short lay lengths, fleece wrap- ping, screen braiding of tinned copper wires, outer sheath polyurethane compound, halo- gen-free, flame-retardant (IEC 60332.1), silver-grey (RAL 7001) resp. orange (RAL 2003 in accordance to DESINA ® ). Technical Data Minimum bending radius for ÖLFLEX-SERVO-FD ® 785 P flexing: 5 x cable diameter static: 3 x cable diameter ÖLFLEX-SERVO-FD ® 785 CP flexing: 7,5 x cable diameter static: 4 x cable diameter Temperature range: flexing: -40 °C up to +80 °C static: -50 °C up to +90 °C Conductor stranding: extra fine wire in accordance to VDE 0295, class 6 / IEC 60228 Cl.6 Core ident code: black cores with white numbers (VDE 0293) Protective conductor: G = with protective conductor GN/YE Nominal voltage U0/U: 600/1000 V Insulation: specific insulation resistance: > 20 GOhm x cm Test voltage: 4000 V In accordance to: VDE 0250/0281/0282 1.88
Transcript of ÖLFLEX-SERVO-FD 785 P / 785 CP - RS Components · ÖLFLEX-SERVO-FD® 785 P / 785 CP The...
DNC motors, frequency con-verters
ÖLFLEX-SERVO-FD® 785 P / 785 CP
The superflexible motor supply cable 0,6/1 kV for use in power chains, halogen free. Now in DESINA® conform version.
ApplicationÖLFEX-SERVO-FD® 785 P/785 CP cables, especially designed to connect servo motors, for continuously flexible applications like in power chains. The screened version, due to its EMC compliance, is mainly used as connection cable between frequency con-verters and servo motors.
Special FeatureDrastically reduced minimum bending radii due to optimised design and smallest space requirements. Outer diameter, in particular the -785 CP ver-sion, is qualified for a service life of max. 5 million alternat-ing bending cycles in power chains for travel distance up to 100m, materials halogen-free, cold-flexible down to -40°C, outdoor use, the oil-resistant PUR outer sheath is flame-retardant and not adhesive.
NotePlease observe the assembly guidelines for ÖLFLEX-FD® and UNITRONIC-FD® cables in power chain systems page T3. The product is conform to EEC directive 73/23 (Low Voltage Directive)CE. Further cables for power chains selection table highly flexible FD cables see page A2. ÖLFLEX-FD® 785P/CP is proved for power chains with long travel lengths. For higher temperatures we rec-ommend to use LAPPTHERM® 105 FD page 3.4 LAPPTHERM® 105 FD + C page 3.4.DESINA® conform cables with orange outer sheath.
Cable Make-upÖLFLEX-SERVO-FD ® 785 P Extra fine strands of plain copper wires, core insulation based on TPE, cores black with white numbers, one core green-yellow as protective conductor, cores twisted in extremely short lay lengths, fleece wrapping, outer sheath polyurethane compound, hal-ogen-free, silver-grey (RAL 7001), flame-retardant (IEC 60332.1).
ÖLFLEX-SERVO-FD® 785 CP Extra fine strands of plain copper wires, core insulation based on TPE, cores black with white numbers, one core green-yellow as protective con-tuctor, cores twisted with polyester fibres in extremely short lay lengths, fleece wrap-ping, screen braiding of tinned copper wires, outer sheath polyurethane compound, halo-gen-free, flame-retardant (IEC 60332.1), silver-grey (RAL 7001) resp. orange (RAL 2003 in accordance to DESINA®).
Technical Data
Minimum bending radius forÖLFLEX-SERVO-FD® 785 Pflexing: 5 x cable diameterstatic: 3 x cable diameterÖLFLEX-SERVO-FD® 785 CPflexing: 7,5 x cable diameterstatic: 4 x cable diameter
Temperature range:flexing: -40 °C up to +80 °Cstatic: -50 °C up to +90 °C
Conductor stranding:extra fine wire in accordance to VDE 0295, class 6 / IEC 60228 Cl.6
Core ident code:black cores with white numbers (VDE 0293)
Protective conductor:G = with protective conductor GN/YE
Nominal voltage U0/U:600/1000 V
Insulation: specific insulation resistance:> 20 GOhm x cm
Test voltage:4000 V
In accordance to:VDE 0250/0281/0282
1.88
HK_01_088.indd 11.10.2001, 21:51 Uhr1
DNC motors, frequency con-verters
ÖLFLEX-SERVO-FD® 785 P / 785 CP
The superflexible motor supply cable 0,6/1 kV for use in power chains, halogen free. Now in DESINA® conform version.
Part number No of cores and mm² per conductor Outside diameter in mm max. Copper weight kg/km Approx. weight kg/km
ÖLFLEX-SERVO®-FD 785 P0036 380 4 G 1,5 10,5 58 1290036 381 4 G 2,5 12,3 96 1870036 382 4 G 4 14,1 154 2730036 383 4 G 6 15,6 231 3580036 384 4 G 10 20,1 384 5850036 387 5 G 10 22,3 480 7420036 385 4 G 16 23,4 615 8630036 386 4 G 25 28,3 960 1309
0036 650 5 G 1,5 11,2 72 1660036 651 5 G 2,5 13,3 120 2460036 652 5 G 4,0 15,2 192 3500036 653 5 G 6,0 16,8 288 4730036 655 5 G 16,0 25,5 768 11680036 656 5 G 25,0 30,8 1200 1789
ÖLFLEX-SERVO®-FD 785 CP0036 390 4 G 1,5 11,1 92 1670036 391 4 G 2,5 19,2 139 2340036 392 4 G 4 14,9 221 3480036 393 4 G 6 16,4 307 4420036 394 4 G 10 21,2 482 6910036 395 4 G 16 24,4 725 9820036 396 4 G 25 29,5 1136 14980036 397 4 G 35 35,0 1605 2114
0036 660 5 G 1,5 11,8 115,5 2130036 661 5 G 2,5 14,1 184,6 3170036 662 5 G 4 16,0 265,7 4310036 663 5 G 6 17,6 363,6 5570036 664 5 G 10 22,7 609,6 9320036 665 5 G 16 26,7 940,7 13580036 666 5 G 25 31,8 1417,9 2016
ÖLFLEX®-SERVO-FD 785 CP DESINA0036 630 4 G 1,5 11,1 92 1670036 631 4 G 2,5 12,9 139 2340036 632 4 G 4 14,9 221 3480036 633 4 G 6 16,4 307 4420036 634 4 G 10 21,2 482 6910036 635 4 G 16 24,4 725 982
G = with protective conductor; X = without protective conductor.No cutting charge for standard stock units (50, 100, 250, 500, 1000 m).Please declare us your desired design (e.g. 1 x 500 m drum or 5 x 100 rings).Rings < 30 kg, beyond automatically drums.
1.89
HK_01_089.indd 11.10.2001, 21:52 Uhr1
