Leuze Cubic 3 Series Sensors

Leuze electronic

3 SeriesProduct description

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

1

Leuze electronic

Small construction series in robust plastic housing

Operating principles:- Throughbeam photoelectric sensors- Retro-reflective photoelectric sensors- Retro-reflective photoelectric sensors with polarisation

filter- Energetic diffuse reflection light scanners- Diffuse reflection light scanners with background

suppression

Visible red light for fast and easy alignment

High switching frequency up to 2000kHz for detection of fast events

10 30VDC voltage with PNP transistor output or push-pull output

- M8/M12 connector for fast installation- Cable models for installation locations with limited

space

Options:- Warning output- Activation input- Teach-in via button (lockable) or teach input

3 SeriesOverview and advantages


3

Leuze electronic

Versatile and easy to integrate- Small, compact construction- IP 67 and IP 69K- Active suppression of extraneous light

ALS- Simple alignment with visible red light- Reliable mounting with inset metal

sleeves- Application-specific, special solutions

available, e.g. diffuse reflection scanner with elongated light spot

Throughbeam photoelectric sensors Advantage 1: Visible light spot Advantage 2: Large operating range Advantage 3: Suppression of reflector problems Advantage 4: Very comfortable alignment Advantage 5: With activation input for muting function

Retro-reflective photoelectric sensors with polarisation filter Advantage 1: Highest functional reliability through active ambient light suppression ALS Advantage 2: High performance reserve Advantage 3: Special models with autocollimation principle available

Retro-reflective photoelectric sensors for detection of glass, PET, and foils. Advantage 1: Easy setting via lockable teach button or teach input Advantage 2: Push-pull output with light/dark switching via teach button Advantage 3: Retro-reflective photoelectric sensor without polarisation filter may also be used with glass reflectors (TG)

Laser retro-reflective photoelectric sensors Advantage 1: Polarised retro-reflective photoelectric sensor with autocollimation principle Advantage 2: Laser safety class 1 Advantage 3: High switching frequency for detection of fast events and small parts

Energetic diffuse reflection light scanners Advantage 1: Simple contrast detection Advantage 2: Adjustable via potentiometer Advantage 3: Long scanning range

Diffuse reflection light scanners with background suppression

Advantage 1: Mechanical background suppression Advantage 2: Very good black/white behaviour Advantage 3: Application-specific, special solutions available, e.g. diffuse reflection scanner with elongated light spot

A2 LS

Special features of Series 3Small, compact and competitively priced sensors


4

Leuze electronic

Operating principle

Designation Typ. oper. range limit/ typ. scan. range limit

Housing Light source Operating voltage

Output Frequency

Plas

tic

Red

light

Red

light

, Las

er c

lass

1

10

30V

DC

PNP

trans

isto

r

NPN

tran

sist

or

Push

-Pul

l

LSR 3/44.8-S8 0 8500mm 1000Hz

LSR 3/44.8 0 8500mm 1000Hz

ILSR 3/4.8-S8 0 8500mm 1000Hz

LSR 3/44.8, 5000 0 8500mm 1000Hz

LSR 3/22.8-S8 0 8500mm 1000Hz

ILSR 3/4.8 0 8500mm 1000Hz

ILSR 3/4.8, 200-S8 0 8500mm 1000Hz

PRK 3B/66 20 6000mm 1000Hz

PRK 3B/66-S8 20 6000mm 1000Hz

PRK 3B/66, 200-S8 20 6000mm 1000Hz

PRK 3B/66, 200-S12 20 6000mm 1000Hz

PRK 3B/6.7 20 6000mm 1000Hz

PRK 3B/6.7-S8 20 6000mm 1000Hz

PRK 3B/6.22 0 5000mm 1000Hz

PRK 3B/6.22-S8 0 5000mm 1000Hz

PRK 3B/6.22, 200-S8 0 5000mm 1000Hz

RKR 3B/6.42 0 1800mm 1000Hz

RKR 3B/6.42-S8 0 1800mm 1000Hz

RKR 3B/6.42, 200-S8 0 1800mm 1000Hz

PRKL 3B/6.22 0 3000mm 2000Hz

PRKL 3B/6.22-S8 0 3000mm 2000Hz

PRKL 3B/6.22, 200-S8 0 3000mm 2000Hz

RTR 3/22-300-S8 5 500mm 1000Hz

RTR 3/44-300-S8 5 500mm 1000Hz

RTR 3/44-300 5 500mm 1000Hz

HRTR 3/44-150-S8 7 180mm 1000Hz

HRTR 3/44-150 7 180mm 1000Hz

HRTR 3/22-150 7 180mm 1000Hz

HRTR 3/22-150-S8 7 180mm 1000Hz

HRTR 3/44-150, 5000 7 180mm 1000Hz

HRTR 3/44-65-S8 7 180mm 1) 1000Hz

HRTR 3/4-150, 200-S8 7 180mm 1000Hz

HRTR 3/44-150, 150-S12 7 180mm 1000Hz

HRTR 3/44-50-S8 5 150mm 2) 500Hz

HRTR 3/44-50,150-S12 5 150mm 2) 500Hz

1) Scanning range preset to 65mm2) Special light spot 3x40mm at 50mm

Sensor selection table


5

Leuze electronic

Switching Connection Options Page

Ligh

t swi

tchi

ng

Dar

k sw

itchi

ng

Cabl

e

M8

con

ne

ctor

Cabl

e wi

th

M8

con

ne

ctor

Cabl

e wi

th

M12

con

nect

or

War

ning

out

put

Activ

atio

n in

put

Back

grou

nd s

uppr

essio

n

Pola

risat

ion

filter

Sens

itivity

adju

stmen

t via

pote

ntio

met

er

Sens

itivity

adju

stmen

t via

teac

h bu

tton

or te

ach

inpu

t

Tran

spar

ent m

edia

Fo

cuss

ed lig

ht b

eam

Dire

ct c

onne

ctio

n to

AS

-i I/O

cou

plin

g m

odul

es

7 7 7 7 7 7 9

12 12 12 12 15 15 18 18 18

24 24 24

30 30 30

37 37 37

39 39 39 39 39 39 41 43 45 45


Leuze electronic

Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730www.leuze.de

6

We

rese

rve

the

right

to m

ake

chan

ges

3_a0

1e.fm

! Throughbeam photoelectric sensor with high performance reserve in red light

! Small construction with robust plastic hous-ing, protection class IP 67/IP 69K for industrial application

! High switching frequency for detection of fast events

! Complementary switching outputs for light/dark switching or as a control function

! Warning output autoControl for increased availability

8.5m

10 - 30 VDC

Accessories:(available separately see page 46)! Mounting systems (BT 3)! M8 connectors (D M8A)! Ready-made cables (K-D )

UL USCLISTED

IEC 60947... IEC 60947...IPIP 69K69KIPIP 6767

Dimensioned drawing

A Optical axisB Adjustment screw only receiverC Indicator diode only receiver

Electrical connection

LSR 3 Throughbeam photoelectric sensors

LSR 3/44.8/5000/-S8 - 04 ILSR 3/4.8-S8 - 04

Specifications and description


Leuze electronic

LSR 3/44.8/5000/-S8 - 04 0605ILSR 3/4.8-S8 - 04

7

SpecificationsOptical data Typ. operating range limit 1)

1) Typ. operating range limit: max. attainable range without performance reserve

0 8.5mOperating range 2)

2) Operating range: recommended range with performance reserve

0 6m Light source LED (modulated light)Wavelength 660nm (visible red light)

TimingSwitching frequency 1000HzResponse time 0.5msDelay before start-up 100ms

Electrical dataOperating voltage UB 10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 25mASwitching output 2 transistor outputs, complementaryFunction characteristics light/dark switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mASensitivity adjustable with multiturn potentiometer

IndicatorsLED yellow light path free LED yellow flashing light path free, no performance reserve

Mechanical data Housing plasticOptics cover plastic (PMMA)Weight 20g Connection type M8 connector (4-pin) or

PUR cable 2m and 5m (cross section 4x0.2mm)Environmental dataAmbient temp. (operation/storage) -25C +55C/-40C +70C Protective circuit 3)

3) 2=polarity reversal protection, 3=short-circuit protection for all outputs

2, 3 VDE safety class 4)

4) Rating voltage 250VAC

II, all-insulated Protection class IP 67, IP 69K 5)

5) IP 69K test acc. to DIN 40050 part 9 simulated, high pressure cleaning conditions without the use of additives,acids and bases are not part of the test

LED class 1 (acc. to EN 60825-1)Standards applied IEC 60947-5-2

OptionsActivation input activTransmitter active/not active 8V/ 2V or not connectedActivation/disable delay 1ms Input resistance 4.7k 10%Warning output autoControl warn PNP transistor, counting principleSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mA

Order guideSelection table

Order code "

Equipment # LSR

3/44

.8

Part

No.

50

0 30

996

(Tr)

Part

No.

50

0 31

276

(Re)

LSR

3/44

.8, 5

000

Part

No.

50

0 33

654

(Tr)

Part

No.

50

0 33

653

(Re)

LSR

3/44

.8-S

8 Pa

rt N

o. 50

0 30

995

(Tr)

Part

No.

50

0 31

275

(Re)

ILSR

3/4

.8-S

8 Pa

rt N

o. 50

0 30

995

(Tr)

Part

No.

50

0 30

915

(Re)

LSR

3/22

.8-S

8 Pa

rt N

o. 50

0 30

995

(Tr)

Part

No.

50

0 37

975

(Re)

ILSR

3/4

.8

Part

No.

50

0 30

996

(Tr)

Part

No.

50

0 30

916

(Re)

Switching output 2xPNP transistor (Re) ! ! !2xNPN transistor (Re) !1xPNP transistor (Re) ! !light/dark switching ! ! ! !light switching ! !

Connection M8 connector ! ! !cable 5000mm !cable 2000mm ! !

Features activation input (Tr) ! ! ! ! ! !warning output ! !

Tables0 6.0 8.5

Operating range [m]Typ. operating range limit [m]

Diagrams

-200-150-100-50

050

100150200

0 1 2 3 4 5 6 7 8 9

y1

y2

Distance x [m]

Mis

alig

nmen

t y [m

m]

Typ. response behaviour

y2y1

x

Remarks

LSR 3/44.8 LSSR 3.8LSER 3/44

LSR 3/44.8, 5000 LSSR 3.8, 5000LSER 3/44, 5000

LSR 3/44.8-S8 LSSR 3.8-S8LSER 3/44-S8

ILSR 3/4.8-S8 LSSR 3.8-S8ILSER 3/4-S8

LSR 3/22.8-S8 LSSR 3.8-S8LSER 3/22-S8

ILSR 3/4.8 LSSR 3.8ILSER 3/4

[I]LSR = Pair consisting ofLSSR = Transmitter[I]LSER = Receiver

LSR 3


Leuze electronic


8

We

rese

rve

the

right

to m

ake

chan

ges

3_a0

2e.fm

! Throughbeam photoelectric sensor with high performance reserve in red light



! Warning output autoControl for increased availability

8.5m

10 - 30 VDC



Dimensioned drawing

A Optical axisB Adjustment screw only receiverC Indicator diode only receiver


LSR 3 Throughbeam photoelectric sensors

LSSR 3.8,200-S8 - 03 ILSER 3/4,200-S8 - 03



Leuze electronic

LSSR 3.8,200-S8 - 03 0605ILSER 3/4,200-S8 - 03

9

SpecificationsOptical data Typ. operating range limit 1)




0 6m Light source LED (modulated light)Wavelength 660nm (visible red light)


Electrical dataOperating voltage UB 10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 25mASwitching output 1 PNP transistor outputFunction characteristics light switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mASensitivity adjustable with multiturn potentiometer

IndicatorsLED yellow light path free LED yellow flashing light path free, no performance reserve

Mechanical data Housing plasticOptics cover plastic (PMMA)Weight 20g Connection type M8 connector (4-pin)

with 200mm cable tailEnvironmental dataAmbient temp. (operation/storage) -25C +55C/-40C +70C Protective circuit 3)







OptionsActivation input activTransmitter active/not active 8V/ 2V or not connectedActivation/disable delay 1ms Input resistance 4.7k 10%Warning output autoControl warn PNP transistor, counting principleSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mA

Order guideDesignation Part No.

Transmitter and receiver ILSR 3/4.8, 200-S8

Transmitter with 200mm cableand M8 connector

LSSR 3.8,200-S8 500 41888

Receiver with 200mm cableand M8 connector

ILSER 3/4,200-S8 500 41887

Tables0 6.0 8.5


Diagrams

-200-150-100-50

050

100150200

0 1 2 3 4 5 6 7 8 9

y1

y2

Distance x [m]

Mis

alig

nmen

t y [m

m]


y2y1

x

Remarks

LSR 3


Leuze electronic


10

We

rese

rve

the

right

to m

ake

chan

ges

3B_b

01e.

fm

! Polarised retro-reflective photoelectric sensor with visible red light

! High performance reserve! Small and compact construction with robust

plastic housing, protection class IP 67/IP 69K for industrial application

! Fast alignment through brightVision! ALS - Active Ambient Light Suppression! Push-pull switching outputs! High switching frequency for detection of

fast events! Warning output for increased availability

0.02 6m1 kHz

10 - 30 VDC

A2 LS

Accessories:(available separately see page 46)! Mounting systems (BT 3)! Cable with M8 or M12 connector (K-D )! Reflectors! Reflective tapes

UL USCLISTED


Dimensioned drawing

A Indicator diode greenB Indicator diode yellowC Optical axisD Attachment sleeve


PRK 3B Retro-reflective photoelectric sensors with polarisation filter

PRK 3B/4, /4D - 01 PRK 3B/6, /6D, /66 - 01



Leuze electronic

PRK 3B/4, /4D - 01 0605PRK 3B/6, /6D, /66 - 01

11

SpecificationsOptical dataTyp. op. range limit (TK(S) 100x100) 1)


0.02 6mOperating range 2)


see tablesLight source 3)

3) Average life expectancy 100'000h at an ambient temperature of 25C

LED (modulated light)Wavelength 620nm (visible red light, polarised)


Electrical dataOperating voltage UB 4)

4) For UL applications: for use in class 2 circuits according to NEC only

10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 14mASwitching output 5) /66

5) The push-pull switching outputs must not be connected in parallel

2 push-pull switching outputs pin 2: PNP dark switching, NPN light switchingpin 4: PNP light switching, NPN dark switching

/6 1 push-pull switching outputpin 4: PNP light switching, NPN dark switching

/6D 1 push-pull switching outputpin 4: PNP dark switching, NPN light switching

/4 1 PNP switching output light switching, 1 warning output/4D 1 PNP switching output dark switching,

pin 2: not connected 6)

6) Pin 2: unassigned, hence especially suitable for the connection to AS-interface I/O coupling modules

Function characteristics light/dark switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mASensitivity fixed setting

IndicatorsLED green readyLED yellow light path freeLED yellow flashing light path free, no performance reserve

Mechanical data Housing plastic (PC-ABS); 1 attachment sleeve, nickel-plated steelOptics cover plastic (PMMA)Weight with connector: 10g

with 200mm cable and connector: 20gwith 2m cable: 50g

Connection type cable 2m (cross section 4x0.21mm), connector M8 metal, cable 0.2m with connector M8 or M12

Environmental dataAmbient temp. (operation/storage) -30C +55C/-30C +70CProtective circuit 7)

7) 2=polarity reversal protection, 3=short-circuit protection for all transistor outputs


8) Rating voltage 50V

II for cable,III for metal plug

Protection class IP 67, IP 69KLED class 1 (acc. to EN 60825-1) Standards applied IEC 60947-5-2Certifications UL 508 4)

OptionsWarning output autoControl warn PNP transistor, counting principleSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mA

Tables

TK = adhesiveTKS = screw type

Reflectors Operating range

1 TK(S) 100x100 0.02 5.0m2 TK 40x60 0.02 3.0m3 TK 20x40 0.02 1.5m4 Tape 4 50x50 0.02 1.2m1 0.02 5 62 0.02 3 3.63 0.02 1.5 24 0.02 1.2 1.6


Diagrams

A TK 100x100B TKS 40x60C TKS 20x40D Tape 4: 50x50

-150-100-50

050

100150

0 1 2 3 4 5 6

y1

y2

Distance x [m]

Mis

alig

nmen

t y [m

m]


y2

x

y1

0 1 2 3 4 5 605

101520253035404550556065

A BCD

Distance x [m]

Perfo

rma

nce

re

serv

e

Typ. performance reserve

RemarksMounting system:

= BT 3 (Part No. 500 60511)

+ = BT 3.1 1)(Part No. 501 05585)

++ = BT 3B (Part No. 501 05546)

1) Packaging unit: PU = 10 pcs.

PRK 3B


Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730 PRK 3B/4, /4D - 01www.leuze.de PRK 3B/6, /6D, /66 - 01

12

Leuze electronic

Order guide

Selection table

Order code "

Equipment #

PRK

3B/6

6Pa

rt N

o. 50

1 04

693

PRK

3B/6

6-S8

Part

No.

50

1 04

694

PRK

3B/6

6, 2

00-S

8Pa

rt N

o. 50

1 04

695

PRK

3B/6

6, 2

00-S

12Pa

rt N

o. 50

1 04

696

PRK

3B/4

D-S8

on r

equ

est

IPR

K3B

/4-S

8on r

equ

est

PRK

3B/6

-S8.

3on r

equ

est

PRK

3B/6

, 200

-S8.

3on r

equ

est

PRK

3B/6

D-S8

.3on r

equ

est

PRK

3B/6

D, 2

00-S

8.3

on r

equ

est

Switching output

2 x Push-pull switching output ! ! ! !1 x Push-pull switching output ! ! ! !1 x PNP output ! !

Switching function

1 PNP light switching and NPN dark switching output ! ! ! ! ! !1 PNP dark switching and NPN light switching output ! ! ! ! ! !1 x PNP light switching output !1 x PNP dark switching output !1 warning output !

Connection M8 connector, metal, 3-pin ! !M8 connector, metal, 4-pin ! ! !cable 2000mm !cable 200mm with M8 connector, 3-pin ! !cable 200mm with M8 connector, 4-pin !cable 200mm with M12 connector, 4-pin !pin 2: not assigned, for connection to coupling modules !

Indicators green LED: ready ! ! ! ! ! ! ! ! ! !yellow LED: switching output ! ! ! ! ! ! ! ! ! !



Leuze electronic


14

We

rese

rve

the

right

to m

ake

chan

ges

3B_b

02e.

fm


! High performance reserve! Small and compact construction with robust

plastic housing, protection class IP 67/IP 69K for industrial application

! Fast alignment through brightVision ! ALS - Active Ambient Light Suppression! Push-pull switching output! High switching frequency for detection of

fast events! Low current consumption

0.02 6m1 kHz

10 - 30 VDC

A2 LS


UL USCLISTED


Dimensioned drawing

A Indicator diode yellowB Optical axis


PRK 3B Economy Retro-reflective photoelectric sensors with polarisation filter

PRK 3B/6.7 - 01 PRK 3B/6D.7 - 01



Leuze electronic

PRK 3B/6.7 - 01 0605PRK 3B/6D.7 - 01

15



0.02 6mOperating range 2)








10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 10mASwitching output 5) /6.7


1 push-pull switching outputpin 4: PNP light switching, NPN dark switchingpin 2: not connected 6)

6) Pin 2: unassigned, hence especially suitable for the connection to AS-interface I/O coupling modules

/6D.7 1 push-pull switching outputpin 4: PNP dark switching, NPN light switchingpin 2: not connected 6)

Function characteristics light/dark switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mASensitivity fixed setting

IndicatorsLED yellow light path freeLED yellow flashing light path free, no performance reserve

Mechanical data Housing plastic (PC-ABS)Optics cover plastic (PMMA)Weight (plug/cable) 10g/50gConnection type cable 2m (cross section 4x0.21mm),

M8 plastic connectorEnvironmental dataAmbient temp. (operation/storage) -30C +55C/-30C +70CProtective circuit 7)




IIProtection class IP 67, IP 69KLED class 1 (acc. to EN 60825-1) Standards applied IEC 60947-5-2Certifications UL 508 4)

Order guide

Selection table

Order code "

Equipment #

PRK

3B/6

.7Pa

rt N

o. 50

1 04

697

PRK

3B/6

.7-S

8Pa

rt N

o. 50

1 04

698

PRK

3B/6

D.7

on r

equ

est

PRK

3B/6

D.7-

S8on r

equ

est

Switching output

1 x Push-pull switching output ! ! ! !

Switching function

1 PNP light switching and NPN dark switching output ! !1 PNP dark switching and NPN light switching output ! !

Connection M8 connector, plastic, 4-pin ! !cable 2000mm ! !pin 2: not assigned, for connection to coupling modules ! ! ! !

Indicators yellow LED: switching output ! ! ! !

Tables



1 TK(S) 100x100 0.02 5.0m2 TK 40x60 0.02 3.0m3 TK 20x40 0.02 1.5m4 Tape 4 50x50 0.02 1.2m1 0.02 5 62 0.02 3 3.63 0.02 1.5 24 0.02 1.2 1.6


Diagrams


-150-100-50

050

100150

0 1 2 3 4 5 6

y1

y2

Distance x [m]

Mis

alig

nmen

t y [m

m]


y2

x

y1

0 1 2 3 4 5 605

101520253035404550556065

A BCD

Distance x [m]

Perfo

rma

nce

re

serv

e



= BT 3 (Part No. 500 60511)

+ = BT 3.1 1)(Part No. 501 05585)

++ = BT 3B (Part No. 501 05546)


PRK 3B Economy


Leuze electronic


16

We

rese

rve

the

right

to m

ake

chan

ges

3B_b

03e.

fm


! Small and compact construction with robust plastic housing, protection class IP 67/IP 69K for industrial application

! ALS - Active Ambient Light Suppression! Push-pull output with light/dark switching via

teach-in button! High switching frequency for detection of

fast events! Autocollimation principle! Easy setting via lockable teach button or

teach input

0 5m1 kHz

10 - 30 VDC

A2 LS


UL USCLISTED


Dimensioned drawing

A Indicator diode greenB Indicator diode yellowC Optical axisD Teach buttonE Attachment sleeve



PRK 3B/6.22 - 01 PRK 3B/4.28 - 01



Leuze electronic

PRK 3B/6.22 - 01 0605PRK 3B/4.28 - 01

17



0 5mOperating range 2)










1 push-pull switching outputpin 4: PNP light switching, NPN dark switchingpin 2: teach input

/6.22-S8.3 1 push-pull switching outputpin 4: PNP light switching, NPN dark switching

/4.28 1 PNP switching output, light switching,pin 2: activation input

Function characteristics light/dark reversibleSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mASensitivity setting via teach-in

IndicatorsLED green readyLED yellow light path freeLED yellow flashing light path free, no performance reserve 6)

6) Display "no performance reserve" as yellow flashing LED is only available in standard teach setting



Connection type cable 2m (cross section 4x0.21mm), connector M8 metal, cable 0.2m with connector M8 or M12







OptionsTeach-in input/activation inputTransmitter active/not active 8V/ 2VActivation/disable delay 1msInput resistance 30k

Tables



1 TK(S) 100x100 0 4.0m2 TK 40x60 0 3.0m3 TK 20x40 0 1.3m4 Tape 4 50x50 0 0.7m1 0 4 52 0 3 3.63 0 1.3 1.54 0 0.7 1.0


Diagrams


-40

-20-30

-100

10203040

0 1 2 3 4 5 6

y1

y2

Distance x [m]

Mis

alig

nmen

t y [m

m]


y2

x

y1

0 1 2 3 4 5 605

101520253035404550

A BCD

Distance x [m]

Perfo

rma

nce

re

serv

e



= BT 3 (Part No. 500 60511)

+ = BT 3.1 1)(Part No. 501 05585)

++ = BT 3B (Part No. 501 05546)


PRK 3B


Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730 PRK 3B/6.22 - 01www.leuze.de PRK 3B/4.28 - 01

18

Leuze electronic

Order guide

Sensor adjustment (teach) via teach button

Standard teaching for average sensor sensitivity

! Press teach button until both LEDs flash simultaneously.

! Release teach button.! Ready.

After the standard teaching, the sensor switches when half of the light beam is covered by the object.

Selection table

Order code "

Equipment #

PRK

3B/6

.22

Part

No.

50

1 04

699

PRK

3B/6

.22-

S8Pa

rt N

o. 50

1 04

700

PRK

3B/6

.22,

200

-S8

Part

No.

50

1 04

701

PRK

3B/6

.22,

200

-S12

on r

equ

est

PRK

3B/6

.22-

S8.3

on r

equ

est

IPR

K3B

/6.2

2, 2

00-S

8.3

on r

equ

est

PRK

3B/4

.28-

S8on r

equ

est

Switching output 1 x Push-pull switching output ! ! ! ! ! !1 x PNP output !

Switching function light/dark switching configurable ! ! ! ! ! !light switching !

Connection M8 connector, metal, 3-pin !M8 connector, metal, 4-pin ! !cable 2000mm !cable 200mm with M8 connector, 3-pin !cable 200mm with M8 connector, 4-pin !cable 200mm with M12 connector, 4-pin !

Configuration teach-in via button (lockable) and teach input ! ! ! !teach-in via button ! ! !

Options activation input !Indicators LED green: ready + teach sequence ! ! ! ! ! ! !

yellow LED: switching output ! ! ! ! ! ! !

! The sensor is factory-adjusted for maximum operat-ing range. Recommendation: teach only if the desired objects are not reliably detected.

! Prior to teaching:Clear the light path to the reflector!The device setting is stored in a fail-safe way. A reconfig-uration following voltage interruption or switch-off is thus not required.

2 7ssimultaneously

flashing at3Hz

LEDgreen

LEDyellow



PRK 3B/6.22 - 01 0605PRK 3B/4.28 - 01

19

Leuze electronic

Teaching for increased sensor sensitivity

! Press teach button until both LEDs flash alternatingly.


After the teaching for increased sensor sensitivity, the sensor switches when about 18% of the light beam are covered by the object.

Teaching for maximum operating range (factory setting at delivery)

! Prior to teaching:Cover the light path to the reflector!

! Procedure as for standard teaching.

Adjusting the switching behaviour of the switching output light/dark switching

! Press teach button until the green LED flashes. The yellow LED displays the current setting of the switching output:ON = output switches on lightOFF = output switches on dark

! Continue to press the teach button in order to change the switching behaviour.


7 12salternatingly

flashing at3Hz

LEDgreen

LEDyellow

2 7ssimultaneously

flashing at3Hz

LEDgreen

LEDyellow

> 12s

LEDgreen

flashes at3Hz

LED yellow

ON =light switching

OFF =dark switching

PRK 3B


Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730 PRK 3B/6.22 - 01www.leuze.de PRK 3B/4.28 - 01

20

Leuze electronic

Locking the teach button via the teach input

A static high signal ( 4ms) at the teach input locks the teach button on the device if required, such that no manual operation is possible (e.g., protection from erroneous operation or manipulation).If the teach input is not connected or if there is a static low signal, the button is unlocked and can be operated freely.

Sensor adjustment (teach) via teach inputThe following description applies to PNP switching logic!UTeach low 2V UTeach high (UB-2V) Prior to teaching: Clear the light path to the reflector!The device setting is stored in a fail-safe way. A reconfiguration following voltage interruption or switch-off is thus not required.


After the standard teaching, the sensor switches when half of the light beam is covered by the object.

UTeach low

tTeach14 ... 1000 ms

t

UTeach high

UTeach low4 ms

t

UTeach high4 ms 4 ms

simultaneouslyflashing at

3Hz

LEDgreen

LEDyellow

Quick standard teach

Afte

r the

del

ay be

fore

sta

rt-up

(

300m

s) ha

s elap

sed,

the

teac

h bu

tton

on th

e de

vice

can

be

ope

rate

d.

The

teac

h bu

tton

is d

isabl

ed

af-

ter t

he 1

st e

dge.

Stan

dard

te

ach:

t T

each

1 =

4

1000

ms

Afte

r abo

ut 4

ms,

th

e cu

rrent

te

ach

valu

e is

app

lied,

teac

h pr

oces

s co

mpl

eted

.Th

e bu

tton

rem

ains

disa

bled

until

the

next

sig

nal c

hang

e.

Teach

butto

n m

ay n

ow b

e op

er-

ate

d ag

ain.

shortest teaching duration for standard teaching: approx. 12ms



PRK 3B/6.22 - 01 0605PRK 3B/4.28 - 01

21

Leuze electronic

Teaching for increased sensor sensitivity

After the teaching for increased sensor sensitivity, the sensor switches when about 18% of the light beam are covered by the object.


UTeach low

tTeach21000 ... 2000 ms

t

UTeach high

alternatinglyflashing at

3Hz

LEDgreen

LEDyellow

Afte

r the

del

ay b

efore

sta

rt-up

(

300m

s) ha

s elap

sed,

the

teac

h bu

tton

on th

e de

vice

can

be

ope

rate

d.

The

teac

h bu

tton

is d

isabl

ed

af-

ter t

he 1

st e

dge.

Teac

h fo

r in

crea

sed

sens

or

sen

sitiv

ity:

t Tea

ch2

= 1

000

20

00m

s

Afte

r abo

ut 4

ms,

th

e cu

rrent

te

ach

valu

e is

app

lied,

teac

h pr

oces

s co

mpl

eted

.Th

e bu

tton

rem

ains

disa

bled

until

the

next

sig

nal c

hang

e.

Teach

butto

n m

ay n

ow b

e op

er-

ate

d ag

ain.

UTeach low

tTeach Output2000 ... 3000 ms

tp light4 ... 1000 ms

t

UTeach high

Afte

r the

del

ay be

fore

sta

rt-up

(

300m

s) ha

s elap

sed,

the te

ach

butto

n on

the

devi

ce c

an b

e op

erat-

ed. Th

e te

ach

butto

n is

disa

bled

afte

r th

e 1s

t edg

e.

Setti

ng

the

switc

hin

g be

havio

ur

of t

he s

witc

hing

out

put:

t Tea

ch O

utpu

t = 2

000

30

00m

s

Switc

hing

out

put s

witc

hes

on

lig

ht:

t p li

ght =

4

1000

ms

Switc

hing

out

put s

witc

hes

on

da

rk:

t p d

ark

= 1

000

20

00m

s

The

butto

n re

mai

ns d

isabl

ed

until

the

next

sig

nal c

hang

e.

LEDgreen

flashes at3Hz

LED yellow

ON =light switching

OFF =dark switching

UTeach low


tp dark1000 ... 2000 ms

t

UTeach high

PRK 3B


Leuze electronic


22

We

rese

rve

the

right

to m

ake

chan

ges

3B_b

04e.

fm

! Retro-reflective photoelectric sensor with visible red laser light and autocollimation principle


! Low current consumption! Push-pull output with light/dark switching via

teach-in button! High switching frequency for detection of

fast events! Specifically for transparent media (glass,

PET, foils)! Easy setting via lockable teach button or

teach input! May also be used with glass reflectors (TG)

0 1.8m1 kHz

10 - 30 VDC


UL USCLISTED


Dimensioned drawing



RKR 3B Retro-reflective photoelectric sensor

RKR 3B/6.42 - 01 RKR 3B/4.48 - 01



Leuze electronic

RKR 3B/6.42 - 01 0605RKR 3B/4.48 - 01

23







LED (modulated light)Wavelength 620nm (visible red light)








/4.48 1 PNP switching output, light switchingpin 2: activation input


IndicatorsLED green readyLED yellow light path free

Mechanical data Housing plastic (PC-ABS), 1 attachment sleeve, nickel-plated steelOptics cover plastic (PMMA)Weight with connector: 10g


Connection type cable 2m (cross section 4x0.20mm), connector M8 metal, cable 2m with connector M8 or M12








Tables

TK = adhesiveTKS = screw typeMTKS = micro triple, screw type


1 TK(S) 100x100 0 1.5m2 TK 40x60 0 1.0m3 MTKS 50x50 0 1.0m4 TK 20x40 0 0.5m1 0 1.5 1.82 0 1 1.23 0 1 1.24 0 0.5 0.6


Diagrams

-30-20-10

0102030

0 0,5 1 1,5 2

y1

y2

Distance x [m]

Mis

alig

nmen

t y [m

m] Typ. response behaviour

y2

x

y1


= BT 3 (Part No. 500 60511)

+ = BT 3.1 1)(Part No. 501 05585)

++ = BT 3B (Part No. 501 05546)


RKR 3B


Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730 RKR 3B/6.42 - 01www.leuze.de RKR 3B/4.48 - 01

24

Leuze electronic

Order guide

General information

! The sensor is factory-adjusted for the detection of coloured glass. Recommendation: teach only if the desired objects are not reliably detected.

! The light spot may not exceed the reflector.! Preferably use MTKS 50x50 reflectors.! For reflecting objects, the sensor has to be mounted approx. 5 angular towards the object.


Selection table

Order code "

Equipment #

RK

R3B

/6.4

2Pa

rt N

o. 50

1 04

702

RK

R3B

/6.4

2-S8

Part

No.

50

1 04

703

RK

R3B

/6.4

2, 2

00-S

8Pa

rt N

o. S5

01 0

4704

RK

R3B

/6.4

2, 2

00-S

12on r

equ

est

RK

R3B

/6.4

2-S8

.3on r

equ

est

RK

R3B

/6.4

2, 2

00-S

8.3

on r

equ

est

RK

R3B

/4.4

8-S8

on r

equ

est




Configuration teach-in via button (lockable) and teach input ! ! ! !teach-in via button (lockable) ! ! !

Options activation input !Indicators green LED: ready ! ! ! ! ! ! !


! Prior to teaching:Clear the light path to the reflector!The device setting is stored in a fail-safe way. A reconfiguration following voltage interruption or switch-off is thus not required.

5



RKR 3B/6.42 - 01 0605RKR 3B/4.48 - 01

25

Leuze electronic

Standard teaching for average sensor sensitivity (coloured glass)



If the receive signal from the reflector is too weak, the sensor indicates the error status by means of fast and simultaneous flashing of the green and yellow LEDs. Please check the alignment, operating range, and soiling and carry out another teaching.

Teaching for increased sensor sensitivity (clear glass, PET, foils)

! Press teach button until both LEDs flash alternatingly.


If the receive signal from the reflector is too weak, the sensor indicates the error status by means of fast and simultaneous flashing of the green and yellow LEDs. Please check the alignment, operating range, and soiling and carry out another teaching.





2 7ssimultaneously

flashing at3Hz

LEDgreen

LEDyellow

7 12salternatingly

flashing at3Hz

LEDgreen

LEDyellow

> 12s

LEDgreen

flashes at3Hz

LED yellow

ON =light switching

OFF =dark switching

RKR 3B


Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730 RKR 3B/6.42 - 01www.leuze.de RKR 3B/4.48 - 01

26

Leuze electronic



Sensor adjustment (teach) via teach inputThe following description applies to PNP switching logic!UTeach low 2V UTeach high (UB-2V)Prior to teaching: Clear the light path to the reflector!The device setting is stored in a fail-safe way. A reconfiguration following voltage interruption or switch-off is thus not required.

Standard teaching for average sensor sensitivity (coloured glass)

If the receive signal from the reflector is too weak, the sensor indicates the error status by means of fast and simulta-neous flashing of the green and yellow LEDs. Please check the alignment, operating range, and soiling and carry out another teaching.

UTeach low


t

UTeach high

UTeach low4 ms

t



3Hz

LEDgreen

LED yellow


Afte

r the

del

ay be

fore

sta

rt-up

(

300m

s) ha

s elap

sed,

the

teac

h bu

tton

on th

e de

vice

can

be

ope

rate

d.

The

teac

h bu

tton

is d

isabl

ed

af-

ter t

he 1

st e

dge.

Stan

dard

te

ach:

t T

each

1 =

4

1000

ms

Afte

r abo

ut 4

ms,

th

e cu

rrent

te

ach

valu

e is

app

lied,

teac

h pr

oces

s co

mpl

eted

.Th

e bu

tton

rem

ains

disa

bled

until

the

next

sig

nal c

hang

e.

Teach

butto

n m

ay n

ow b

e op

er-

ate

d ag

ain.




RKR 3B/6.42 - 01 0605RKR 3B/4.48 - 01

27

Leuze electronic

Teaching for increased sensor sensitivity (clear glass, PET, foils)

If the receive signal from the reflector is too weak, the sensor indicates the error status by means of fast and simulta-neous flashing of the green and yellow LEDs. Please check the alignment, operating range, and soiling and carry out another teaching.


UTeach low

tTeach21000 ... 2000 ms

t

UTeach high


3Hz

LEDgreen

LED yellow

Afte

r the

del

ay b

efore

sta

rt-up

(

300m

s) ha

s elap

sed,

the

teac

h bu

tton

on th

e de

vice

can

be

ope

rate

d.

The

teac

h bu

tton

is d

isabl

ed

af-

ter t

he 1

st e

dge.

Teac

h fo

r in

crea

sed

sens

or

sen

sitiv

ity:

t Tea

ch2

= 1

000

20

00m

s

Afte

r abo

ut 4

ms,

th

e cu

rrent

te

ach

valu

e is

app

lied,

teac

h pr

oces

s co

mpl

eted

.Th

e bu

tton

rem

ains

disa

bled

until

the

next

sig

nal c

hang

e.

Teach

butto

n m

ay n

ow b

e op

er-

ate

d ag

ain.

UTeach low



t

UTeach high

Afte

r the

del

ay be

fore

sta

rt-up

(

300m

s) ha

s elap

sed,

the te

ach

butto

n on

the

devi

ce c

an b

e op

erat-

ed. Th

e te

ach

butto

n is

disa

bled

afte

r th

e 1s

t edg

e.

Setti

ng th

e sw

itchi

ng

beha

vio

ur

of t

he s

witc

hing

out

put:

t Tea

ch O

utpu

t = 2

000

30

00m

s

Switc

hing

out

put s

witc

hes

on

lig

ht:

t p li

ght =

4

1000

ms

Switc

hing

out

put s

witc

hes

on

da

rk:

t p d

ark

=

100

0

2000

ms

The

butto

n re

mai

ns d

isabl

ed

until

the

next

sig

nal c

hang

e.

LEDgreen

flashes at3Hz

LED yellow

ON =light switching

OFF =dark switching

UTeach low


tp dark1000 ... 2000 ms

t

UTeach high

RKR 3B


Leuze electronic


28

We

rese

rve

the

right

to m

ake

chan

ges

3B_b

05e.

fm

! Polarised retro-reflective photoelectric sensor with autocollimation principle


! Push-pull output with light/dark switching via teach-in button

! High switching frequency for detection of fast events and small parts

! Easy setting via lockable teach button or teach input

! Laser safety class 1

0 3m2 kHz

10 - 30 VDC


UL USCLISTED


Dimensioned drawing



PRKL 3B Laser retro-reflective photoelectric sensor with polarisation filter

PRKL 3B/6.22 - 01 PRKL 3B/4.28 - 01



Leuze electronic

PRKL 3B/6.22 - 01 0605PRKL 3B/4.28 - 01

29

SpecificationsOptical dataTyp. op. range limit (MTKS 50 x 50) 1)


0 3mOperating range 2)


see tablesLight beam characteristic collimatedLight spot diameter approx. 2mm at light beam gateLight source 3)


Laser (pulsed)Wavelength 655nm (visible red light, polarised)Max. output power 0.25mWPulse duration 3s








/4.28 1 PNP switching output, light switching,pin 2: activation input


IndicatorsLED green readyLED yellow light path freeLED yellow flashing light path free, no performance reserve 6)

6) Display "no performance reserve" as yellow flashing LED is only available in standard teach setting



Connection type cable 2m (cross section 3x0.20mm), connector M8 metal, cable 2m with connector M8 or M12






Protection class IP 67, IP 69KLaser class 1 (acc. to EN 60825-1) Standards applied IEC 60947-5-2Certifications CDRH 21 CFR 1040 9), UL 508 4)

9) Applied for


Tables

MTKS = micro triple, screw type


1 MTKS 50x50 0 2.0m2 MTKS 15x30 0 1.6m3 MTKS 20x40.1 0 1.0m1 0 2.0 3.02 0 1.6 2.23 0 1.0 1.5


Diagrams


= BT 3 (Part No. 500 60511)

+ = BT 3.1 1)(Part No. 501 05585)

++ = BT 3B (Part No. 501 05546)


PRKL 3B


Leuze electronic GmbH + Co. KG Post-box 1111 D-73277 Owen-Teck Tel. +49 7021 5730 PRKL 3B/6.22 - 01www.leuze.de PRKL 3B/4.28 - 01

30

Leuze electronic

Order guide

General information! The laser retro-reflective photoelectric sensors PRKL 3B/ have an optimised light beam propagation in the typical range of

application of 0 1m (not to be confused with the operating range, which is 0 3m in combination with a reflector MTKS 50x50). This permits the reliable recognition of the smallest of parts or the positioning of objects with maximum precision across the entire area.

! The sensor is constructed on the basis of the autocollimation principle, i.e., light being transmitted and light being received prop-agate along the same light axis. This permits the photoelectric sensor to be installed directly behind small holes or diaphragms. The smallest permissible diaphragm diameter for secure functioning is 3mm.

! The achievable resolution depends significantly on the unit's configuration. Depending on the teach mode, the following values are possible:

! For safety reasons, the laser transmitter is equipped with a monitor, which automatically switches off the transmitter in case of a component defect. In case of failure, the yellow LED flashes rapidly and the green LED is off. The state is irreversible and the sensor must be exchanged.

Selection table

Order code "

Equipment #

PRK

L3B

/6.2

2Pa

rt N

o. 50

1 04

705

PRK

L3B

/6.2

2-S8

Part

No.

50

1 04

706

PRK

L3B

/6.2

2, 2

00-S

8Pa

rt N

o. 50

1 04

707

PRK

L3B

/6.2

2, 2

00-S

12on r

equ

est

PRK

L3B

/6.2

2-S8

.3on r

equ

est

PRK

L3B

/6.2

2, 2

00-S

8.3

on r

equ

est

PRK

L3B

/4.2

8-S8

on r

equ

est




Configuration teach-in via button (lockable) and teach input ! ! ! !teach-in via button (lockable) ! ! !

Options activation input !Indicators green LED: ready ! ! ! ! ! ! !


Setting Detection from object size 1)

1) All specifications are typical values and may vary by a small amount for each unit.

Sensor switches at a light occlusion ofmax. operating range

(factory setting) 1.5mm 50%normal sensor sensitivity

(standard teaching) 1mm 25%maximum sensor sensitivity

(dynamic teaching) 0.1 0.2mm 5%

Diaphragm diameter 3mm

Typ. application range 0 1m



PRKL 3B/6.22 - 01 0605PRKL 3B/4.28 - 01

31

Leuze electronic





After standard teaching, the sensor switches for objects with a minimum size of 1mm (see table under "General Infor-mation").If both LEDs flash rapidly after the teach-ing event, a teaching error has hap-pened. Please check the alignment of the light beam onto the reflector and carry out another teaching event.

Teaching for maximal sensor sensitivity (dynamic teaching)

! Press teach button until both LEDs flash alter-natingly. Sensor remains in teaching mode even after the teach button has been released.

! Move some objects through the light path or swing a single object slowly back and forth through the light path.

! Briefly press the teach button to terminate the teaching event.

! Ready

After teaching for maximum sensor sen-sitivity, the sensor switches for objects with a minimum size of 0.1 0.2mm (see table under "General Information").If both LEDs flash rapidly after the teach-ing event, a teaching error has hap-pened. Please check the alignment of the light beam onto the reflector and carry out another teaching event.

! Prior to teaching:Clear the light path to the reflector!The device setting is stored in a fail-safe way. A reconfiguration following voltage interruption or switch-off is thus not required.

2 7ssimultaneously

flashing at3Hz

LEDgreen

LEDyellow

7 12salternatingly

flashing at3Hz

LEDgreen

LEDyellow

PRKL 3B



32

Leuze electronic

Teaching for maximum operating range (factory setting at delivery)

! Prior to teaching:Cover the light path to the reflector!

! Procedure as for standard teaching.





2 7ssimultaneously

flashing at3Hz

LEDgreen

LEDyellow

> 12s

LEDgreen

flashes at3Hz

LED yellow

ON =light switching

OFF =dark switching



PRKL 3B/6.22 - 01 0605PRKL 3B/4.28 - 01

33

Leuze electronic



Sensor adjustment (teach) via teach inputThe following description applies to PNP switching logic!UTeach low 2V UTeach high (UB-2V) Prior to teaching: Clear the light path to the reflector!The device setting is stored in a fail-safe way. A reconfiguration following voltage interruption or switch-off is thus not required.


After standard teaching, the sensor switches for objects with a minimum size of 1mm(see table under "General Information").

UTeach low


t

UTeach high

UTeach low4 ms

t



3Hz

LEDgreen

LEDyellow


Afte

r the

del

ay be

fore

sta

rt-up

(

300m

s) ha

s elap

sed,

the

teac

h bu

tton

on th

e de

vice

can

be

ope

rate

d.

The

teac

h bu

tton

is d

isabl

ed

af-

ter t

he 1

st e

dge.

Stan

dard

te

ach:

t T

each

1 =

4

1000

ms

Afte

r abo

ut 4

ms,

th

e cu

rrent

te

ach

valu

e is

app

lied,

teac

h pr

oces

s co

mpl

eted

.Th

e bu

tton

rem

ains

disa

bled

until

the

next

sig

nal c

hang

e.

Teach

butto

n m

ay n

ow b

e op

er-

ate

d ag

ain.


PRKL 3B



34

Leuze electronic

Teaching for maximal sensor sensitivity (dynamic teaching)

After teaching for maximum sensor sensitivity, the sensor switches for objects with a minimum size of 0.1 0.2mm (see table under "General Information").


UTeach low

tTeach21000 ... 2000 ms

t

UTeach high


3Hz

LEDgreen

LEDyellow

Afte

r the

del

ay b

efore

sta

rt-up

(

300m

s) ha

s elap

sed,

the

teac

h bu

tton

on th

e de

vice

can

be

ope

rate

d.

The

teac

h bu

tton

is d

isabl

ed

af-

ter t

he 1

st e

dge.

Teac

h fo

r m

axim

um

sen

sor

sen

sitiv

ity:

t Tea

ch2

= 1

000

20

00m

sBo

th L

EDs

flash

alte

rnatin

gly,

senso

r re

main

s in

teac

hing

m

ode

.M

ove s

om

e o

bjects

th

roug

h th

e lig

ht p

ath

or m

ove

a s

ingl

e ob

ject s

lowly

back

and

forth

thro

ugh

the

light

pat

h.

Afte

r abo

ut 4

ms,

th

e cu

rrent

te

ach

valu

e is

app

lied,

teac

h pr

oces

s co

mpl

eted

.Th

e bu

tton

rem

ains

disa

bled

until

the

next

sig

nal c

hang

e.

Teach

butto

n m

ay n

ow b

e op

er-

ate

d ag

ain.

UTeach low



t

UTeach high

Afte

r the

del

ay be

fore

sta

rt-up

(

300m

s) ha

s elap

sed,

the te

ach

butto

n on

the

devi

ce c

an b

e op

erat-

ed. Th

e te

ach

butto

n is

disa

bled

afte

r th

e 1s

t edg

e.

Setti

ng

the

switc

hin

g be

havio

ur

of t

he s

witc

hing

out

put:

t Tea

ch O

utpu

t = 2

000

30

00m

s

Switc

hing

out

put s

witc

hes

on

lig

ht:

t p li

ght =

4

1000

ms

Switc

hing

out

put s

witc

hes

on

da

rk:

t p d

ark

= 1

000

20

00m

s

The

butto

n re

mai

ns d

isabl

ed

until

the

next

sig

nal c

hang

e.

LEDgreen

flashes at3Hz

LED yellow

ON =light switching

OFF =dark switching

UTeach low


tp dark1000 ... 2000 ms

t

UTeach high



Leuze electronic


36

We

rese

rve

the

right

to m

ake

cha

nges

3_c

01e.

fm

! Energetic scanner with sensitivity adjustment

! Visible red light for fast and easy alignment! Small construction with robust plastic

housing, protection class IP 67/IP 69K for industrial application


! Complementary switching outputs for light/dark switching or as a control function

5 500mm

10 - 30 VDC


UL USCLISTED


Dimensioned drawing

A ReceiverB TransmitterC Optical axisD Adjustment screwE Indicator diode


RTR 3 Energetic diffuse reflection light scanner

RTR 3/44-300 - 04 RTR 3/44-300-S8 - 04


Leuze electronic

RTR 3/44-300 - 04 0605RTR 3/44-300-S8 - 04

37

SpecificationsOptical data Typ. scanning range limit 1)

1) Typ. scanning range limit: max. attainable range without performance reserve

5 500mmScanning range 2)

2) Scanning range: recommended range with performance reserve

see tablesAdjustment range 60 500mm Light source LED (modulated light)Wavelength 660nm (visible red light)


Electrical dataOperating voltage UB 10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 25mASwitching output 2 transistor outputs, complementaryFunction characteristics light/dark switching Signal voltage high/low (UB-2V)/ 2VOutput current max. 100mASensitivity adjustable with multiturn potentiometer

IndicatorsLED yellow reflection LED yellow flashing reflection, no performance reserve


PUR cable 2m (cross section 4x0.2mm)Environmental dataAmbient temp. (operation/storage) -25C +55C/-40C +70C Protective circuit 3)








With cable With complementary PNP switching outputs RTR 3/44-300 500 30921

With M8 connectorWith complementary PNP switching outputs RTR 3/44-300-S8 500 30920With complementary NPN switching outputs RTR 3/22-300-S8 500 33310

Tables1 5 300 5002 8 145 2203 10 110 120

1 white 90%2 grey 18%3 black 6%

Scanning range [mm]Typ. scanning range limit [mm]

Diagrams

A white 90%B grey 18%C black 6%

-40-30-20-10

010203040

0 50 100 150 200 250 300 350

y2

y1

Distance x [mm]

Mis

alig

nme

nt y

[mm]

Typ. response behaviour (white 90%)

y2

x

y1

0

50

100

150

200

250

0 50 100 150 200 250 300 350 400

ABC

Scanning range x [mm]Red

. of s

can

ra

nge

y [m

m]Typ. black/white behaviour

x

y

Remarks! With the set scanning

range, a tolerance of the upper scanning range limit is possible depending on the reflection properties of the material surface.

RTR 3


Leuze electronic


38

We

rese

rve

the

right

to m

ake

chan

ges

3_d0

2e.fm

! Scanner with adjustable background suppression

! Very good black/white performance, exact adjustment via multiturn potentiometer



7 180mm

10 - 30 VDC


UL USCLISTED


Dimensioned drawing



HRTR 3 Diffuse reflection light scanner with background suppression

HRTR 3/44/22-150 - 04 HRTR 3/44/22-150-S8 - 04


Leuze electronic

HRTR 3/44/22-150 - 04 0605HRTR 3/44/22-150-S8 - 04

39





see tablesAdjustment range 25 180mmLight beam characteristic focussed at 110mmLight source LED (modulated light)Wavelength 660nm (visible red light)


Electrical dataOperating voltage UB 10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 25mASwitching output 2 transistor outputs, complementaryFunction characteristics light/dark switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mA

IndicatorsLED yellow reflection


PUR cable 2m/5m (cross section 4x0.2mm)Environmental dataAmbient temp. (operation/storage) -25C +55C/-40C +70C Protective circuit 3)







Order guideSelection table

Order code "

Equipment # HRTR

3/4

4-15

0Pa

rt N

o. 50

0 30

925

HRT

R 3

/44-

150-

S8Pa

rt N

o. 50

0 30

924

HRT

R 3

/44-

150,

500

0Pa

rt N

o. 50

0 37

144

HRT

R 3

/22-

150

Part

No.

50

0 32

368

HRT

R 3

/22-

150-

S8Pa

rt N

o. 50

0 82

277

HRT

R 3

/44-

65-S

8Pa

rt N

o. 50

0 39

581

Switching output PNP transistor ! ! ! !NPN transistor ! !light/dark switching ! ! ! ! ! !

Connection M8 connector ! ! !cable 5000mm !cable 2000mm ! !

Scanning range preset to 65mm !

Tables1 7 150 1802 10 148 1753 15 144 169



Diagrams


-5-4-3-2-1012345

0 20 40 60 80 100 120 140 160

y2

y1

Distance x [mm]

Mis

alig

nmen

t y [m

m]


y2

x

y1

-2

2

4

6

8

10

12

0

0

20 40 60 80 100 120 140 160 180

ABC

Scanning range x [mm]

Red

. of s

can

rang

e y

[mm]

Typ. black/white behaviour

x

y



HRTR 3


Leuze electronic


40

We

rese

rve

the

right

to m

ake

chan

ges

3_d0

1e.fm





7 180mm

10 - 30 VDC


UL USCLISTED


Dimensioned drawing




HRTR 3/4-150, 200-S8 - 03


Leuze electronic

HRTR 3/4-150, 200-S8 - 03 0605

41







Electrical dataOperating voltage UB 10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 25mASwitching output 1 PNP transistor outputFunction characteristics light switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mA



with 200mm cable tailEnvironmental dataAmbient temp. (operation/storage) -25C +55C/-40C +70C Protective circuit 3)






LED class 1 (acc. to EN 60825-1)Standards applied acc. to IEC 60947-5-2


With 200mm cable and M8 connector HRTR 3/4-150, 200-S8 500 33214

Tables1 7 150 1802 10 148 1753 12 144 169



Diagrams


-5-4-3-2-1012345

0 20 40 60 80 100 120 140 160

y2

y1

Distance x [mm]

Mis

alig

nmen

t y [m

m]


y2

x

y1

-2

2

4

6

8

10

12

0

0

20 40 60 80 100 120 140 160 180

ABC

Scanning range x [mm]

Red

. of s

can

rang

e y

[mm]

Typ. black/white behaviour

x

y



HRTR 3


Leuze electronic


42

We

rese

rve

the

right

to m

ake

chan

ges

3_d0

4e.fm





! Cable tail with M12 connector for optimal mounting

7 180mm

10 - 30 VDC


UL USCLISTED


Dimensioned drawing




HRTR 3/44-150, 150-S12- 03


Leuze electronic

HRTR 3/44-150, 150-S12- 03 0605

43







Electrical dataOperating voltage UB 10 30VDC (incl. residual ripple) Residual ripple 15% of UBBias current 25mASwitching output 2 PNP transistor outputs, complementaryFunction characteristics light/dark switchingSignal voltage high/low (UB-2V)/ 2VOutput current max. 100mA



with 150mm cable tail (cross section 4x0.2mm)Environmental dataAmbient temp. (operation/storage) -25C +55C/-40C +70C Protective circuit 3)








With complementary PNP switching outputs HRTR 3/44-150, 1

Leuze Cubic 3 Series Sensors

Documents

Transcript of Leuze Cubic 3 Series Sensors