Lesson 3 Running IGSS as an Operator, Part Oned2i1dro1ulg1xm.cloudfront.net/training/Lesson...
Transcript of Lesson 3 Running IGSS as an Operator, Part Oned2i1dro1ulg1xm.cloudfront.net/training/Lesson...
INSIGHT
AND
OVERVIEW
Lesson 3 – Running IGSS as an
Operator, Part One
Contents of this lesson
Topics: • Starting IGSS • IGSSMaster basics • Locating objects (Object Browser) • Controlling objects and plant monitoring • Alarm Handling
2 Lesson 3: Running as an operator, part one
Starting IGSS
Use IGSSMaster.exe • From IGSS install folder (default: C:\Program
Files\7T\IGSS32\V9.0\GSS) • As a Windows shortcut • From Windows Start menu • Autostart when Windows boots
3 Lesson 3: Running as an operator, part one IGSS Starter IGSS Master
...or use IGSS.exe (IGSS Starter) for a more operator-restricted environment.
The IGSSMaster
4 Lesson 3: Running as an operator, part one
Some quick IGSS concepts
5 Lesson 3: Running as an operator, part one
IGSS Project
Area A
Area B
Area C
Diagram 1
Diagram 2
Diagram 3 Diagram 4
Diagram 5
Graph 01
Graph 02
Graph 03
Graph 04
Demo Project
6 Lesson 3: Running as an operator, part one
Global Training Cases
Home Dairy Refuse Disposal Coffee Recipe Vester Hassing District Heating Waste Water Treatment Overview Water Supply Overview of Training Diagrams Beverage Overview of Training Diagrams 2 Pump Station
Overview of Project Examples District Heating Water Supply Boiler Waste Water Treatment
PST01 Levels
Boiler Parameters Water Supply Total Extractions Water Supply Total Outlets
Exercise Setup
Exercise: Running IGSS as an Operator, part one
7 Lesson 3: Running as an operator, part one
Exercise requirements: • Install IGSS Free50 • Load Demo license • Open Demo project
To load the Demo License: 1. Change the mode to Design mode (Click Application Menu) 2. Click Information and Support > License > Drop down
arrow 3. Select Install IGSS Demo License 4. Click OK in the Install License form
Exercise Setup (con’t)
8 Lesson 3: Running as an operator, part one
To open the Demo Project: 1. Change the mode to Design mode (Click Application Menu) 2. Stop any running project (IGSS Master > Home tab > Stop
button) 3. Click Design and Setup tab > Open Project button> Drop
down arrow 4. Select Open IGSS Demo Project 5. Click OK in the dialog box. 6. Start the Demo project in IGSS Master > Home tab > Start
button.
More Information...
9 Lesson 3: Running as an operator, part one
Find presentations and exercises on http://www.7t.dk/products/igss/training/scada-training-videos.aspx