LED LCD MONITOR - CNET Content...
Transcript of LED LCD MONITOR - CNET Content...
-
www.lg.com
OWNER’S MANUAL
LED LCD MONITORPlease read this manual carefully before operating your set and retain it for future reference.
LED LCD MONITOR MODELS
ENG
LISH
E1951TE2051T E2251T E2351T
E1951S E2051S E2251S
E2251VRE2351VR
E2251VQE2351VQ
-
2
ENG
ENG
LISH
TABLE OF CONTENTS
CONTENTS
3 ASSEMBLINGANDPREPAR-ING
3 Unpacking4 Partsandbuttons6 SettinguptheMonitorset6 -AttachingtheStandBase6 -DetachingtheStandBase6 -DetachingtheStandBody(Usingthe
Wallmount)7 -Mountingonatable9 -Mountingonawall
10 USINGTHEMONITORSET10 ConnectingtoaPC10 -D-SUBconnection11 -DVI-Dconnection12 -HDMIconnection
13 CUSTOMIZINGSETTINGS13 AccessingTheMainMenus14 CustomizingSettings14 -MenuSettings15 -SUPERENERGYSAVINGSettings16 -SUPER+RESOLUTIONSettings16 -VolumeSettings(Onlysupportedin
HDMI)17 -DUALMONITORSettings17 -DUALWEBSettings
18 TROUBLESHOOTING
20 SPECIFICATIONS25 PresetModes(Resolution)25 -D-SUB/DVITiming
26 -HDMITiming26 Indicator
27 PROPERPOSTURE27 ProperpostureforusingtheMonitorset.
-
3EN
GEN
GLIS
HASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
UnpackingCheck your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
yy Do not use any unapproved accessories to ensure the safety and product life span.yy Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy The accessories supplied with your product may vary depending on the model.yy Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.yy User should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product.
CAUTION
NOTE
Stand Base
CD(Owner's Manual) / Card
D-SUB Cable(This signal cable may be attached to this product before shipping out.)
DVI-D Cable(This cable is not included in all
countries.)
Power Cord AC-DC Adapter
-
4
ENG
ENG
LISH
ASSEMBLING AND PREPARING
HDMI
D-SUBDVI-DDC-IN /
D-SUBDVI-DDC-IN /
D-SUBDC-IN /
Partsandbuttons
PowerIndicatoryy LightingOn:Turnedonyy LightingOff:Turnedoff
Connectionpanel(Seep.10)
Button("CUSTOMIZINGSETTINGS"onpage13)
(PowerButton)
E2251VQE2351VQ
E2251VRE2351VR
HDMI
D-SUBDVI-DDC-IN /
D-SUBDVI-DDC-IN /
D-SUBDC-IN /
E2251TE1951T
E2351TE2051T
E1951S E2051S E2251S
-
5EN
GEN
GLIS
HASSEMBLING AND PREPARING
Button DescriptionMENU Accesses the main menus.(See p.14)
Left First Button OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so that they cannot be inadvertently changed.Press and hold the Left First Button for several seconds.The message "OSD LOCKED" should appear.You can unlock the OSD controls at any time by pushing the Left First Button for several seconds. The message "OSD UNLOCKED" should appear.
SUPER+ RESOLUTION Use this button to enter SUPER+ RESOLUTION menu. For more information.(See p.16)DUAL Use this button to enter DUAL menu.
For more information.(See p.17) AUTO When adjusting your display settings, always press the AUTO button on the MONITOR
SETUP OSD. (Only supported in Analog Mode)The best display modeE1951S / E1951T 1366 x 768E2051S / E2051T 1600 x 900E2251S / E2251T E2251VR / E2251VQE2351T / E2351VR E2351VQ
1920 x 1080
VOLUME (Only HDMI mode) Adjust the volume of the Monitor set.(See p.16)E2251VR / E2351VR / E2251VQ / E2351VQ
INPUT You can choose the input signal. y When two input signals are at least are connected, you can select the input signal
(D-SUB/DVI/HDMI) you want. y When only one signal is connected, it is automatically detected. The default setting is
D-SUB.EXIT Exit the OSD(On Screen Display).
(Power Button) Turns the power on or off.Power Indicator The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue.
-
6
ENG
ENG
LISH
ASSEMBLING AND PREPARING
DetachingtheStandBody(UsingtheWallmount)
1 Remove2screwsandpullouttheHingeCoverfromtheMonitorset.
SettinguptheMonitorsetAttachingtheStandBase
1 PlacetheMonitorsetwiththescreensidedownonaflatandcushionedsurface.
Layafoammatorsoftprotectiveclothonthesurfacetoprotectthescreenfromdamage.
yy Thisillustrationdepictsthegeneralmodelofconnection.Yourmonitormaydifferfromtheitemsshowninthepicture.yy Donotcarrytheproductupsidedownholdingonlythestandbase.Theproductmayfallandgetdamagedorinjureyourfoot.
CAUTION
CAUTION
DetachingtheStandBase
1 PlacetheMonitorsetwiththescreensidedownonaflatandcushionedsurface.
2 Turnthescrewtotheleft,andthenpullouttheStandBasefromtheStandBody.
2 AttachtheStandBaseintotheMonitorsetbyturningtheScrewtotheright.
StandBody
StandBase
-
7EN
GEN
GLIS
HASSEMBLING AND PREPARING
3 PressPowerbuttononthefrontswitchofpaneltoturnthepoweron.
Mountingonatable
1 LiftandtilttheMonitorsetintoitsuprightpositiononatable.Leavea10cm(minimum)spacefromthewallforproperventilation.
10 cm
10 cm
10 cm
10 cm
Disconnectthepowercordfirst,andthenmoveorinstalltheMonitorset.Otherwiseelectricshockmayoccur.
CAUTION
2 ConnecttheAC-DCAdapterandPowerCordtoawalloutlet.
DC-IN /DC-IN /
2Remove4screwsandpullouttheStandBodyfromtheMonitorset.
-
8
ENG
ENG
LISH
ASSEMBLING AND PREPARING
Mounting on a wallFor proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation andSetup Guide.
10 cm
10 cm
10 cm10 cm
Using the Kensington security system
The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the
The Kensington security system is optional. You can obtain it from most electronics stores.
NOTE
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
Do not touch or press the screen when adjusting the angle of the monitor.
WARNING
Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.
NOTE
Front Rear
15- 5
manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
-
9EN
GEN
GLIS
HASSEMBLING AND PREPARING
yy Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.yy If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. yy Use only an authorized LG wall mount and contact the local dealer or qualified personnel.yy Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. yy Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
yy Use the screws that are listed on the VESA standard screw specifications.yy The wall mount kit will include an installation manual and necessary parts.yy The wall mount bracket is optional. You can obtain additional accessories from your local dealer.yy The length of screws may differ depending on the wall mount. Be sure to use the proper length.yy For more information, refer to the instructions supplied with the wall mount.
CAUTION
NOTE
Model E1951SE2051SE2251SE1951TE2051TE2251T
E2351TE2251VRE2351VRE2251VQE2351VQ
VESA (A x B) 75 x 75Standard screw M4Number of screws 4Wall mount bracket (optional)
RW120
If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.When you install the Monitor set using the wall mounting interface (optional parts), attach it carefully so it will not drop.
1 Please, Use the screw and wall mount interface in accordance with VESA Standards.
2 If you use screw longer than standard, the monitor might be damaged internally.
3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.
4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.
5 Please use VESA standard as below.yy 784.8 mm (30.9 inch) and under
* Wall Mount Pad Thickness : 2.6 mm* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mmyy 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws.
AB
yy VESA (A x B)
-
10
ENG
ENG
LISH
USING THE MONITOR SET
D-SUBDC-IN /
RGB OUT
D-SUBDVI-DDC-IN /
HDMI
D-SUBDVI-D
RGB OUT
DC-IN /
USINGTHEMONITORSET
ConnectingtoaPCyy YourMonitorsetsupportsPlug&Play*.*Plug&Play:APCrecognizesaconnecteddevicethatusersconnecttoaPCandturnon,withoutdeviceconfigurationoruserintervention.
D-SUBconnectionTransmitsanalogvideofromyourPCtotheMonitorset.ConnectthePCandtheMonitorsetwiththesuppliedD-sub15pinsignalcableasshowninthefollowingillustrations.
yy MacadapterForAppleMacintoshuse,aseparateplugadapterisneededtochangethe15pinhighdensity(3row)D-SUBVGAconnectoronthesuppliedcabletoa15pin2rowconnector.
yy WhenusingaD-SubsignalinputcableconnectorforMacintosh
NOTE
E1951S E2051S E2251S
E2051TE1951T E2251T E2351T
E2251VR E2351VR E2251VQ E2351VQ
-
11EN
GEN
GLIS
HUSING THE MONITOR SET
DVI-DconnectionTransmitsadigitalvideosignalfromyourPCtotheMonitorset.ConnectthePCandtheMonitorsetwithaDVIcableasshowninthefollowingillustrations.
D-SUBDVI-D
DVI OUT
DC-IN /
HDMI
D-SUBDVI-D
DVI OUT
DC-IN /
yy Connectthesignalinputcableandtightenitbyturningthescrewsclockwise.yy Donotpressthescreenwithyourfingerforalongtimeasthismayresultintemporarydistortiononthescreen.yy Avoiddisplayingafixedimageonthescreenforalongperiodoftimetopreventimageburn.Useascreensaverifpossible.
CAUTION
E2051TE1951T E2251T E2351T
E2251VR E2351VR E2251VQ E2351VQ
-
12
ENG
ENG
LISH
USING THE MONITOR SET
yy "SelfImageSetting"Function.Thisfunctionprovidestheuserwithoptimaldisplaysettings.Whentheuserconnectsthemonitorforthefirsttime,thisfunctionautomaticallyadjuststhedisplaytooptimalsettingsforindividualinputsignals.(OnlysupportedinAnalogMode)
yy ‘AUTO’Function.Whenyouencounterproblemssuchasblurryscreen,blurredletters,screenflickerortiltedscreenwhileusingthedeviceorafterchangingscreenresolution,presstheAUTOfunctionbuttontoimproveresolution.(OnlysupportedinAnalogMode)
NOTE
SelfImageSettingFunction
Pressthepowerbuttononthefrontpaneltoturnthepoweron.Whenmonitorpoweristurnedon,the"SelfImageSetting"Functionisexecutedautomatically.(OnlysupportedinAnalogMode)
yy IfyouuseHDMIPC,itcancausecompatibilityproblem.yy WhenyouwanttousetwoPCinourMonitor,pleaseconnectthesignalcable(D-SUB/DVI-D/HDMI)respectivelyinMonitorset.yy IfyouturntheMonitorsetonwhileitiscold,thescreenmayflicker.Thisisnormal.yy Somered,green,orbluespotsmayappearonthescreen.Thisisnormal.
NOTE
HDMIconnectionTransmitsthedigitalvideoandaudiosignalsfromyourPCorA/VtotheMonitorset.ConnectthePCorA/VandtheMonitorsetwiththeHDMIcableasshowninthefollowingillustrations.
HDMI
D-SUBDVI-D
HDMI OUTHDMI OUT
DC-IN /
E2251VR E2351VR E2251VQ E2351VQ
-
13EN
GEN
GLIS
HCUSTOMIZING SETTINGS
CUSTOMIZINGSETTINGSAccessingTheMainMenus1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 Pressthedesiredmenuitem.
3 ChangethevalueofthemenuitembypressingthebuttonsonthefrontoftheMonitorset.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
4 SelectEXITtoleavetheOSDmenu.
MonitorsetButtons
MENU SUPER+RESOLUTION
DUAL AUTO INPUTVOLUME EXIT
MONITOR SETUP
MENU(Seep.14)Setsthescreenoptions.
AUTO(Seep.5)Optimizestheresolution.
EXITExitstheOSDmenu.
INPUTSetstheexternalinput.
SUPER+RESOLUTION(Seep.16)
DUAL(Seep.17) VOLUME(Seep.16)
Differentmenuitemsareenableddependingonthetypeofinputsignalandmodel.
NOTE
Menu SUPER+RESOLUTION
DUAL AUTO VOLUME INPUT EXIT
E1951S/E2051S/E22551S ● - ● ● - - ●E1951T/E2051T/E2251T/E2351T ● - ● ● - ● ●E2251VR/E2351VR ● ● ● ● - ● ●E2251VR/E2351VR(OnlyHDMIMode) ● ● ● - ● ● ●
E2251VQ/E2351VQ ● - ● ● - ● ●E2251VQ/E2351VQ(OnlyHDMIMode) ● - ● - ● ● ●
-
14
ENG
ENG
LISH
CUSTOMIZING SETTINGS
CustomizingSettingsMenuSettings
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 PresstheMENUbuttontodisplaytheoptionsintheOSDmenu.
3 Settheoptionsbypressingthe◄or►or▼buttons.
4 SelectEXITtoleavetheOSDmenu.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
Menu Analog Digital HDMI DescriptionBRIGHTNESS ● ● ● Adjuststhebrightnessofthescreen.ORIGINALRATIO
● ● ●
WIDESwitchtofullscreenmodeaccordingtoinputimagesignal.ORIGINALChangetheinputimagesignalratiotooriginal.*ThisfunctionworksonlyifinputresolutionislowerthanMonitorsetratio(16:9).
COLORTEMP
● ● ●
PRESET
Selectthescreencolor.y WARM:Setthescreentowarmcolortemperature(morered).y MEDIUM:Setthescreentomediumcolortemperature.y COOL:Setthescreentocoolcolortemperature(Moreblue).USERy RED:Setyourownredcolorlevels.y GREEN:Setyourowngreencolorlevels.y BLUE:Setyourownbluecolorlevels.
CONTRAST ● ● ● Adjuststhecontrastofthescreen.
BLACKLEVEL(OnlysupportedinHDMImode) - - ●
Youcansettheoffsetlevel.Ifyouselect'HIGH',thescreenwillbebrightandifyouselect‘LOW’,thescreenwillbedark.y Offset:Asthecriteriaforvideosignal,itisthedarkestscreenthemonitorcanshow.
LANGUAGE ● ● ● Changesthemenulanguage.
RTC● ● ●
IfyousetON,youenabletheResponseTimeControlfunctionandreducetheafterimageofthescreen.IfyousetOFF,youdisabletheResponseTimeControlfunctionandoperateatpanelresponsetime.
SUPERENERGYSAVING ● ● ●
MovetheSUPERENERGYSAVINGfunction.
FACTORYRESET ● ● ● Returnsthemonitortooriginalfactorysettingsexcept"LANGUAGE".
yy Analog:D-SUB(Analogsignal)input.yy Digital:DVI-D(Digitalsignal)input.yy HDMI:HDMI(Digitalsignal)input.
MENU
EXIT
BRIGHTNESS
ORIGINAL RATIO
COLOR TEMP
PRESET
RED
GREEN
BLUE
CONTRAST
BLACK LEVEL
LANGUAGE
RTC
SUPER ENEYGY SAVING
FACTORY RESET
WIDE
PRESET
WARM
LOW
ENGLISH
ON
NO
TheavailableMENUsettingsaredescribedbelow.
100
50
50
50
70
-
15EN
GEN
GLIS
HCUSTOMIZING SETTINGS
TheavailableMENUsettingsaredescribedbelow.
SUPERENERGYSAVINGSettings
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 PresstheMENUbuttontodisplaytheoptionsintheOSDMenu.
3 SelectSUPERENERGYSAVINGbypressingthe▼button.
4EntertoSUPERENERGYSAVINGbypressingthe►button.
5Settheoptionsbypressing◄or►buttons.
6 SelectEXITtoleavetheOSDmenu.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
TheavailableSUPERENERGYSAVINGsettingsaredescribedbelow.
Menu DescriptionON EnablesSUPERENERGYSAVINGyoucansaveenergywiththisenergy-efficientfunction.OFF DisablesSUPERENERGYSAVING.RESET ResetsthevaluesoftotalenergyconsumptionreductionandCO2emissionreductionestimates.
yy TOTALPOWERREDUCTION:Howmuchpowerissavedwhileusingthemonitor.yy TOTALCO2REDUCTION:ChangetheTOTALPOWERREDUCTIONtoCO2.yy SAVINGDATA(W/h)
470mm(18.5inch) 508mm(20inch) 546mm(21.5inch) 584mm(23inch)
SUPERSAVING 3W/h 3W/h 4W/h 5W/h
LEDSAVING 3W/h 18W/h 15W/h 12W/h
yy SavingDatadependsonthePanel.So,thosevaluesshouldbedifferentfromeachpanelandpanelvendor.yy LGcalculatedthesevaluesbyusing“broadcastvideosignal”.yy LEDSavingmeanshowmuchpowercanbesavedusingaWLEDPanelinsteadofCCFLpanel.yy SUPERSAVINGmeanshowmuchpowercanbesavedusingtheSUPERENERGYSAVINGfunction.
NOTE
EXITOK
ON OFF RESET
TOTAL POWER REDUCTION: 20 W
TOTAL CO2 REDUCTION: 16 g
SUPERSAVING : 5 W/h
LED SAVING: 12 W/h
SUPER ENERGY SAVING
-
16
ENG
ENG
LISH
CUSTOMIZING SETTINGS
SUPER+RESOLUTIONSettings
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 PresstheSUPER+RESOLUTIONbuttontodisplaytheoptionsintheOSDmenu.
3 Settheoptionsbypressing◄or►buttons.
4 SelectEXITtoleavetheOSDmenu.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
TheavailableSUPER+RESOLUTIONsettingsaredescribedbelow.
Menu DescriptionNORMAL Selectthiswhenyouwanttousetheproductinthemostgeneralusingenvironment.Inthe
Generalmode,theSUPER+RESOLUTIONisturnedoff.LOW Whentheuserwantsanaturalvideoscreenwithsoftimage,ithelpstogettheoptimizedscreen.
Itiseffectiveforvideowithsmallmovementorstillimage.MEDIUM Whentheuserwantsacomfortablevideoscreenatthemediumlevelbetweenlowandhigh
mode,ithelpstogettheoptimizedscreen.ItiseffectiveforUCCandSDlevelvideos.HIGH Whentheuserwantsasharpvideoscreenwithclearimages,ithelpstogettheoptimizedscreen.
Itiseffectiveforhighresolutionvideoscreensandgames.
yy NoisemayexistaccordingtoSR(SUPER+RESOLUTION)Mode,soenjoytheclearimagebyselectingSR(SUPER+RESOLUTION)ModeaccordingtotheContents.
NOTE
EXITOK
SUPER+ RESOLUTION
EXIT
NORMAL LOW MEDIUM HIGH
VolumeSettings(OnlysupportedinHDMI)
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 PresstheVOLUMEbuttontodisplaytheoptionsintheOSDmenu.
3 AdjusttheVOLUMEbypressing◄or►buttons.
4 SelectEXITtoleavetheOSDmenu.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
VOLUME
EXIT
30
EXIT
-
17EN
GEN
GLIS
HCUSTOMIZING SETTINGS
DUALMONITORSettings
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORSETUPOSDmenu.
2 PresstheDUALbuttontodisplaytheoptionsintheOSDmenu.
3 Settheoptionsbypressing▼andthen◄and►buttons.
4 SelectEXITtoleavetheOSDmenu.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
DUALWEBSettings
1 PressanybuttononthefrontoftheMonitorsettodisplaytheMONITORWEBOSDmenu.
2 PresstheDUALbuttontodisplaytheoptionsintheOSDmenu.
3 Settheoptionsbypressing▼andthen◄and►buttons.
4 SelectEXITtoleavetheOSDmenu.Toreturntotheuppermenuorsetothermenuitems,usetheuparrow( )button.
TheavailableDUALMONITORsettingsaredescribedbelow.
TheavailableDUALWEBsettingsaredescribedbelow.
Menu DescriptionDUALWEB ON Helpusertobrowsewebefficientlybydividinginhalf.Helptoarrange
andmovewindowsonscreen.Helpusertocontroldividedwindowsratio.
OFF IfselectOFF,DUALWEBisoff.
EXIT
EXIT
DUAL PACKAGE ►DUAL MONITOR
DUAL PACKAGE ►DUAL WEB
OFF EXTENDED CLONE
ON OFF
Menu DescriptionDUALMONITOR OFF IfselectOFF,DUALMONITORoff
EXTENDED ByselectingEXETNDED,usercanusesecondarymonitorasextendedmodeofprimarymonitor.
CLONE ByselectingCLONE,usercanusesecondarymonitorasclonemodeofprimarymonitor.
EXIT
yy WhenmonitorgoestoPowerSavingModewithPCpowersavingoption,onpressinganybuttonandselectingDualoptionusercanbringbackmonitortonormalmode.
NOTE
-
18
ENG
ENG
LISH
TROUBLESHOOTING
yy Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.yy If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.yy The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.
CAUTION
TROUBLESHOOTINGCheck the following before calling for service.No image appearsIs the power cord of the display connected?
y Check and see if the power cord is connected properly to the power outlet.
Is the power indicator light on? y Press the Power button.Is the power indicator blinking? y If the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen. y Try to turn on the PC.
Do you see an "OUT OF RANGE" message on the screen?
y This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.
Do you see a "CHECK SIGNAL CABLE" message on the screen?
y This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?Do you see “OSD LOCKED” when you push Left First Button?
y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the Left First Button for several seconds: the message “OSD UNLOCKED” will appear.
Display image is incorrectDisplay Position is incorrect. y Press the AUTO button to automatically adjust your display image to
the ideal setting.On the screen background, verticalbars or stripes are visible.
y Press the AUTO button to automatically adjust your display image to the ideal setting.
Any horizontal noise appearing in any image or characters are not clearly portrayed.
y Press the AUTO button to automatically adjust your display image to the ideal setting.
y Check Control Panel ► Display ► Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).
-
19EN
GEN
GLIS
HTROUBLESHOOTING
DisplayimageisincorrectThescreencolorismonoorabnormal.
y Checkifthesignalcableisproperlyconnectedanduseascrewdrivertofastenifnecessary.y Makesurethevideocardisproperlyinsertedintheslot.y Setthecolorsettinghigherthan24bits(truecolor)atControlPanel►Settings.
Thescreenblinks. y Checkifthescreenissettointerlacemodeandifyes,changeittotherecommendresolution.
Doyouseean"Unrecognizedmonitor,Plug&Play(VESADDC)monitorfound"message?Haveyouinstalledthedisplaydriver?
y BesuretoinstallthedisplaydriverfromthedisplaydriverCD(ordiskette)thatcomeswithyourdisplay.Or,youcanalsodownloadthedriverfromourwebsite:http://www.lg.com.y MakesuretocheckifthevideocardsupportsPlug&Playfunction.
TheAudiofunctionisnotworkingPictureOK&Nosound. y Checkwhethervolumeis"0".
y Checksoundmuted.y HDMIcableinstalledproperly.y Headphonecableinstalledproperly.y Checksoundformat.Notsupplytocompressedsoundformat.
-
20
ENG
ENG
LISH
SPECIFICATIONS
SPECIFICATIONS
Display ScreenType 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 47.0 cm
PixelPitch 0.3 mm x 0.3 mm (Pixel Pitch)SyncInput HorizontalFrequency 30 kHz to 61 kHz (Automatic)
VerticalFrequency 56Hz to 75Hz (Automatic)InputFormE1951S Separate Sync.E1951T Separate Sync. Digital
VideoInput SignalInputE1951S 15 pin D-SUB ConnectorE1951T 15 pin D-SUB Connector /DVI-D Connector (Digital)InputFormE1951S RGB Analog (0.7 Vp-p/ 75 ohm)E1951T RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution MaxE1951S D-SUB(Analog) : 1366 x 768 @ 60 HzE1951T D-SUB(Analog) / DVI(Digital): 1366 x 768 @ 60 HzRecommend VESA 1366 x 768 @ 60 Hz
Plug&Play E1951S DDC 2B(Analog)E1951T DDC 2B(Analog,Digital)
PowerConsumption On Mode : 17 W(Typ.)Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W
PowerInput 12 V 2.0 AAC-DCAdapter Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicDimensions(WidthxHeightxDepth)
WithStand 44.94 cm x 17.26 cm x 35.6 cmWithoutStand 44.94 cm x 3.35 cm x 27.9 cm
Weight 2 kgTiltRange -5° to 15°Environmentalconditions
OperatingTemperatureOperatingHumidity
10°C to 35 °C20 % to 80 % non-Condensing
StorageTemperatureStorageHumidity
-10°C to 60 °C 5 % to 90 % non-Condensing
StandBase Attached ( ), Detached (O)Powercord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
E1951S E1951T
-
21EN
GEN
GLIS
HSPECIFICATIONS
Display ScreenType 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 50.8 cm
PixelPitch 0.2766 mm x 0.2766 mm (Pixel Pitch)SyncInput HorizontalFrequency 30 kHz to 83 kHz (Automatic)
VerticalFrequency 56Hz to 75Hz (Automatic)InputFormE2051S Separate Sync.E2051T Separate Sync. Digital
VideoInput SignalInputE2051S 15 pin D-SUB ConnectorE2051T 15 pin D-SUB Connector /DVI-D Connector (Digital)InputFormE2051S RGB Analog (0.7 Vp-p/ 75 ohm)E2051T RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution MaxE2051S D-SUB(Analog) : 1600 x 900 @ 60 HzE2051T D-SUB(Analog) / DVI(Digital): 1600 x 900 @ 60 HzRecommend VESA 1600 x 900 @ 60 Hz
Plug&Play E2051S DDC 2B(Analog)E2051T DDC 2B(Analog,Digital)
PowerConsumption On Mode : 21 W(Typ.)Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W
PowerInput 12 V 2.0 AAC-DCAdapter Type ADS-24NP-12-1 12024G, manufactured by HONOR ElectronicDimensions(WidthxHeightxDepth)
WithStand 48.28 cm x 17.42 cm x 37.5 cmWithoutStand 48.28 cm x 3.35 cm x 29.7 cm
Weight 2.197 kgTiltRange -5° to 15°Environmentalconditions
OperatingTemperatureOperatingHumidity
10°C to 35 °C20 % to 80 % non-Condensing
StorageTemperatureStorageHumidity
-10°C to 60 °C 5 % to 90 % non-Condensing
StandBase Attached ( ), Detached (O)Powercord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
E2051S E2051T
-
22
ENG
ENG
LISH
SPECIFICATIONS
E2251S E2251T
Display ScreenType 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating.Visible diagonal size: 54.6 cm
PixelPitch 0.248 mm x 0.248 mm (Pixel Pitch)SyncInput HorizontalFrequency 30 kHz to 83 kHz (Automatic)
VerticalFrequency 56Hz to 75Hz (Automatic)InputFormE2251S Separate Sync.E2251T Separate Sync. Digital
VideoInput SignalInputE2251S 15 pin D-SUB ConnectorE2251T 15 pin D-SUB Connector / DVI-D Connector (Digital)InputFormE2251S RGB Analog (0.7 Vp-p/ 75 ohm)E2251T RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution MaxE2251S D-SUB(Analog) : 1920 x 1080 @ 60 HzE2251T D-SUB(Analog) / DVI(Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 Hz
Plug&Play E2251S DDC 2B(Analog)E2251T DDC 2B(Analog, Digital)
PowerConsumption On Mode : 26 W(Typ.)Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W
PowerInput 19 V 2.1 AAC-DCAdapter Type EADP-40LB B, manufactured by Delta ElectronicsDimensions(WidthxHeightxDepth)
WithStand 51.75 cm x 18.65 cm x 39.4 cmWithoutStand 51.75 cm x 3.35 cm x 31.7 cm
Weight 2.477 kgTiltRange -5° to 15°Environmentalconditions
OperatingTemperatureOperatingHumidity
10°C to 35 °C20 % to 80 % non-Condensing
StorageTemperatureStorageHumidity
-10°C to 60 °C 5 % to 90 % non-Condensing
StandBase Attached ( ), Detached (O)Powercord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
-
23EN
GEN
GLIS
HSPECIFICATIONS
E2251VR E2251VQ
Display ScreenType 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating. Visible diagonal size: 54.6 cm
PixelPitch 0.248 mm x 0.248 mm (Pixel Pitch)SyncInput HorizontalFrequency 30 kHz to 83 kHz (Automatic)
VerticalFrequency 56Hz to 75Hz (D-SUB, DVI-D)56Hz to 61Hz (HDMI)
InputForm Separate Sync. Digital. HDMIVideoInput SignalInput 15 pin D-SUB Connector
DVI-D Connector (Digital)HDMI (TYPE - A) Connector
InputForm RGB Analog (0.7 Vp-p/ 75 ohm), Digital, HDMIResolution Max D-SUB(Analog) :1920 x 1080 @ 60 Hz
DVI(Digital) / HDMI(Digital) :1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 Hz
Plug&Play DDC 2B(Analog, Digital, HDMI)PowerConsumption On Mode : 26 W(Typ.)
Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W
PowerInput 19 V 2.1 AAC-DCAdapter Type EADP-40LB B, manufactured by Delta ElectronicsDimensions(WidthxHeightxDepth)
WithStand 51.75 cm x 18.65 cm x 39.4 cmWithoutStand 51.75 cm x 3.35 cm x 31.7 cm
Weight 2.477 kgTiltRange -5° to 15°Environmentalconditions
OperatingTemperatureOperatingHumidity
10°C to 35 °C20 % to 80 % non-Condensing
StorageTemperatureStorageHumidity
-10°C to 60 °C 5 % to 90 % non-Condensing
StandBase Attached ( ), Detached (O)Powercord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
-
24
ENG
ENG
LISH
SPECIFICATIONS
E2351T E2351VR E2351VQ
Display ScreenType 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coatingVisible diagonal size: 58.4 cm
PixelPitch 0.265 mm x 0.265 mm (Pixel Pitch)SyncInput HorizontalFrequency 30 kHz to 83 kHz (Automatic)
VerticalFrequencyE2351T 56Hz to 75Hz (Automatic)E2351VR/E2351VQ 56Hz to 75Hz (D-SUB, DVI-D)
56Hz to 61Hz (HDMI)InputFormE2351T Separate Sync. DigitalE2351VR/E2351VQ Separate Sync. Digital. HDMI
VideoInput SignalInputE2351T 15 pin D-SUB Connector / DVI-D Connector (Digital)E2351VR/E2351VQ 15 pin D-SUB Connector / DVI-D Connector (Digital)
HDMI (TYPE - A) ConnectorInputFormE2351T RGB Analog (0.7 Vp-p/ 75 ohm), DigitalE2351VR/E2351VQ RGB Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Resolution MaxE2351T D-SUB(Analog) / DVI (Digital) : 1920 x 1080 @ 60 HzE2351VR/E2351VQ D-SUB(Analog) : 1920 x 1080 @ 60 Hz
DVI(Digital) / HDMI(Digital) : 1920 x 1080 @ 60 HzRecommend VESA 1920 x 1080 @ 60 Hz
Plug&Play E2351T DDC 2B(Analog, Digital )E2351VR/E2351VQ DDC 2B(Analog, Digital, HDMI)
PowerConsumption On Mode : 30 W(Typ.)Sleep Mode ≤ 0.5 W Off Mode ≤ 0.5 W
PowerInput 19 V 2.1 AAC-DCAdapter Type EADP-40LB B, manufactured by Delta ElectronicsDimensions(WidthxHeightxDepth)
WithStand 54.92 cm x 18.65 cm x 41.2 cmWithoutStand 54.92 cm x 3.35 cm x 33.5 cm
Weight 2.724 kgTiltRange -5° to 15°Environmentalconditions
OperatingTemperatureOperatingHumidity
10°C to 35 °C20 % to 80 % non-Condensing
StorageTemperatureStorageHumidity
-10°C to 60 °C 5 % to 90 % non-Condensing
StandBase Attached ( ), Detached (O)Powercord Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product functions.
-
25EN
GEN
GLIS
HSPECIFICATIONS
PresetModes(Resolution)D-SUB/DVITiming
E1951S/E1951T
*Ifyoucan'tselect1366x768indisplaypropertytimingoption,pleaseupdateyourvideocarddriverfromyourvideocardvendor.
DisplayModes(Resolution) HorizontalFrequency(kHz)VerticalFrequency(Hz) Polarity(H/V)
720x400 31.468 70 -/+640x480 31.469 60 -/-640x480 37.500 75 -/-800x600 37.879 60 +/+800x600 46.875 75 +/+832x624 49.725 75 -/-1024x768 48.363 60 -/-1024x768 60.123 75 +/+1366x768 47.712 60 +/+ RecommendMode
E2051S/E2051T
DisplayModes(Resolution) HorizontalFrequency(kHz)VerticalFrequency(Hz) Polarity(H/V)
720x400 31.468 70 -/+640x480 31.469 60 -/-640x480 37.500 75 -/-800x600 37.879 60 +/+800x600 46.875 75 +/+1024x768 48.363 60 -/-1024x768 60.123 75 +/+1152x864 67.500 75 +/+1600x900 60.000 60 +/+ RecommendMode
E2251S/E2251T/E2251VR/E2251VQ/E2351T/E2351VR/E2351VQ
DisplayModes(Resolution) HorizontalFrequency(kHz)VerticalFrequency(Hz) Polarity(H/V)
720x400 31.468 70 -/+640x480 31.469 60 -/-640x480 37.500 75 -/-800x600 37.879 60 +/+800x600 46.875 75 +/+1024x768 48.363 60 -/-1024x768 60.123 75 +/+1152x864 67.500 75 +/+1280x1024 63.981 60 +/+1280x1024 79.976 75 +/+1680x1050 65.290 60 -/+1920x1080 67.500 60 +/+ RecommendMode
-
26
ENG
ENG
LISH
SPECIFICATIONS
HDMITiming
E2251VR/E2251VQ/E2351VR/E2351VQ
DisplayModes(Resolution) HorizontalFrequency(kHz) VerticalFrequency(Hz)480P 31.50 60576P 31.25 50720P 37.50 50720P 45.00 601080i 28.12 501080i 33.75 601080P 56.25 501080P 67.50 60
Indicator
Mode LEDColorOnMode BlueSleepMode BlinkingBlueOffMode Off
-
27EN
GEN
GLIS
HPROPER POSTURE
ProperpostureforusingtheMonitorset.
PROPERPOSTURE
AdjusttheMonitorsetandyourpostureto
allowyoutoviewimagesatthe
optimalviewingangle.
Placeyourhandsgentlyonthe
keyboard,keepingyourarmsbentattheelbowsand
horizontallyoutright.
AdjustthelocationoftheMonitorsettoavoiditreflectinglight.
-
Make sure to read the Safety Precautions before using the product.Keep the Owner’s Manual (CD) in an accessible place for future reference.The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
ENERGY STAR is a set of power-savingguidelines issued by the U.S.EnvironmentalProtection Agency(EPA).
MODEL
SERIAL
OWNER’S MANUALCONTENTSASSEMBLING AND PREPARINGUnpackingParts and buttonsSetting up the Monitor set Attaching the Stand BaseDetaching the Stand BaseDetaching the Stand Body (Us ing the Wall mount)Mounting on a tableMounting on a wall
USING THE MONITOR SETConnecting to a PCD-SUB connectionDVI-D connectionHDMI connection
CUSTOMIZING SETTINGSAccessing The Main MenusCustomizing SettingsMenu SettingsSUPER ENERGY SAVING SettingsSUPER+ RESOLUTION SettingsVolume Settings (Only supported in HDMI)DUAL MONITOR SettingsDUAL WEB Settings
TROUBLESHOOTINGSPECIFICATIONSPreset Modes (Resolution)D-SUB / DVI Timing HDMI Timing
Indicator
Proper postureProper posture for using the Monitor set.
Home