LCD TV OWNER’S MANUAL written authorization from LG Electronics. Unauthorized modification could...

Please read this manual carefully before operatingyour set. Retain it for future reference.Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

LCD TVOWNER’S MANUAL22LG3DCH26LG3DCH32LG3DCH32LG3DC

P/NO : SAC30708026 (0810-REV08)

www.lgcommercial.com

This product qualifies forENERGY STAR in the “fac-tory default (Home mode)”setting and this is the set-ting in which power savingswill be achieved.

(Only 32LG3DC model)

1

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose

this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if not installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference toradio or television reception, which can be determinedby turning the equipment off and on, the user isencouraged to try to correct the interference by oneor more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment andreceiver.

- Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TVtechnician for help.

Any changes or modifications not expressly approvedby the party responsible for compliance could voidthe user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any waywithout written authorization from LG Electronics.Unauthorized modification could void the user’sauthority to operate this product

The lightning flash with arrowheadsymbol, within an equilateral triangle, isintended to alert the user to the presence

of uninsulated “dangerous voltage” within theproduct’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock topersons.

The exclamation point within an equilateraltriangle is intended to alert the user to

the presence of important operating andmaintenance (servicing) instructions in the litera-ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV systeminstaller’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines forproper grounding and, in particular, specifies that thecable ground shall be connected to the grounding systemof the building, as close to the point of the cable entryas practical.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install inaccordance with the manufacturer’s instructions.

Do not install near any heat sources such asradiators, heat registers, stoves, or other apparatus(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarizedor grounding-type plug. A polarized plug hastwo blades with one wider than the other. Agrounding type plug has two blades and a thirdgrounding prong, The wide blade or the thirdprong are provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.

Protect the power cord from being walked onor pinched particularly at plugs, conveniencereceptacles, and the point where they exit fromthe apparatus.

Only use attachments/accessories specified bythe manufacturer.

Use only with the cart, stand, tripod, bracket,or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, usecaution when moving the cart/apparatuscombination to avoid injury from tip-over.

Unplug this apparatus during lighting storms orwhen unused for long periods of time.

Refer all servicing to qualified service personnel.Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord orplug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus hasbeen exposed to rain or moisture, does not operatenormally, or has been dropped.

2

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

1

2

3

4

5

7

8

6

9

10

3

Never touch this apparatus or antenna during athunder or lighting storm.

When mounting a TV on the wall, make sure not toinstall the TV by the hanging power and signalcables on the back of the TV.

Do not allow an impact shock or any objects to fallinto the product, and do not drop onto the screenwith something.

CAUTION concerning the Power Cord :It is recommend that appliances be placed upon adedicated circuit; that is, a single outlet circuit whichpowers only that appliance and has no additionaloutlets or branch circuits. Check the specificationpage of this owner's manual to be certain.Do not connect too many appliances to the sameAC power outlet as this could result in fire or elec-tric shock.Do not overload wall outlets. Overloaded wall out-lets, loose or damaged wall outlets, extension cords,frayed power cords, or damaged or cracked wireinsulation are dangerous. Any of these conditionscould result in electric shock or fire. Periodicallyexamine the cord of your appliance, and if itsappearance indicates damage or deterioration,unplug it, discontinue use of the appliance, andhave the cord replaced with an exact replacementpart by an authorized servicer. Protect the powercord from physical or mechanical abuse, such asbeing twisted, kinked, pinched, closed in a door, orwalked upon. Pay particular attention to plugs, walloutlets, and the point where the cord exits theappliance. Do not make the TV with the power cord pluggedin. Do not use a damaged or loose power cord. Besure do grasp the plug when unplugging the powercord. Do not pull on the power cord to unplug theTV.

WARNING - To reduce the risk of fire or electricalshock, do not expose this product to rain, moistureor other liquids. Do not touch the TV with wethands. Do not install this product near flammableobjects such as gasoline or candles or expose theTV to direct air conditioning.

Do not expose to dripping or splashing and do notplace objects filled with liquids, such as vases, cups,etc. on or over the apparatus (e.g. on shelves abovethe unit).

GGRROOUUNNDDIINNGG

Ensure that you connect the earth ground wire toprevent possible electric shock. (i.e. a TV with athree-prong grounded AC plug must be connectedto a three-prong grouned AC outlet) If groundingmethods are not possible, have a qualified electri-cian install a separate circuit breaker.

Do not try to ground the unit by connecting it totelephone wires, lightening rods, or gas pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The plugmust remain readily operable.

Keep the product away from direct sunlight.

12

11

14

13

16

17

18

19

Power Supply

Short-circuitBreaker

15

4

AANNTTEENNNNAASS

OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg

If an outdoor antenna is installed, follow the precau-tions below. An outdoor antenna system should notbe located in the vicinity of overhead power lines orother electric light or power circuits, or where it cancome in contact with such power lines or circuits asdeath or serious injury can occur.

Be sure the antenna system is grounded so as to pro-vide some protection against voltage surges andbuilt-up static charges.

Section 810 of the National Electrical Code (NEC) inthe U.S.A. provides information with respect to prop-er grounding of the mast and supporting structure,grounding of the lead-in wire to an antenna dis-charge unit, size of grounding conductors, location ofantenna discharge unit, connection to groundingelectrodes and requirements for the grounding elec-trode.

AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthheeNNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700

Cleaning

When cleaning, unplug the power cord and scrubgently with a soft cloth to prevent scratching. Do notspray water or other liquids directly on the TV aselectric shock may occur. Do not clean with chemi-cals such as alcohol, thinners or benzene.

Moving

Make sure the product is turned off, unpluggedand all cables have been removed. It may take 2 ormore people to carry larger TVs. Do not pressagainst or put stress on the front panel of the TV.

Ventilation

Install your TV where there is proper ventilation. Donot install in a confined space such as a bookcase.Do not cover the product with cloth or other mate-rials (e.g.) plastic while plugged in. Do not install inexcessively dusty places.

If you smell smoke or other odors coming from theTV or hear strange sounds, unplug the power cordcontact an authorized service center.

Do not press strongly upon the panel with a hand orsharp object such as nail, pencil or pen, or make ascratch on it.

22

20

Antenna Lead in Wire

Antenna Discharge Unit(NEC Section 810-20)

Grounding Conductors(NEC Section 810-21)

Ground Clamps

Power Service GroundingElectrode System (NECArt 250, Part H)

Ground Clamp

Electric ServiceEquipment

NEC: National Electrical Code

23

24

21

25

5

CONTENTS

WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PREPARATION

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Securing the TV to the wall to prevent falling

When the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 16

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Pillow Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Channel Setup

- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

- Add / Delete Channel (Manual Tuning) . . . . . . 38

- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Channel Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 42

Preset Picture Settings

- Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

- Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Manual Picture Adjustment

- Picture Mode - User Mode . . . . . . . . . . . . . . . . . . . . . . . . 47

- Picture Mode - Expert Control . . . . . . . . . . . . . . . . . . 48

Picture Improvement Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Advanced Control - Black (Darkness) Level . . . . . . . 50

Advanced Control - Real Cinema . . . . . . . . . . . . . . . . . . . . . .51

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 53

Clear Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . . 55

Sound Setting Adjustment - User Mode . . . . . . . . . . . 56

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

On-Screen Menus Language Selection . . . . . . . . . . . . . 63

Caption Mode

- Analog Broadcasting System Captions . . . . . . . 64

- Digital Broadcasting System Captions . . . . . . . . 65

- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

TIME SETTING

Clock Setting

- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

6

FEATURES OF THIS TV

is a trademark of SRS Labs, Inc.

TruSurround XT technology is incorporated under

license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories.

“Dolby “and the double-D symbol are trademarks of

Dolby Laboratories.

USB INSERVUCE ONLYSERVUCE ONLY

USB port shall be used for software update by service

personnel only.

FOR LCD TV If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong

with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse

effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some

temporary distortion effects on the screen.

On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with generalhousehold waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

HDMITM, the HDMI logo and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing."

PR

EPA

RA

TIO

N

7

ACCESSORIES

PREPERATION

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the

dealer where you purchased the TV.

The accessories included may differ from the images below.

OOppttiioonn EExxttrraass

D-sub 15 pin Cable

When using the VGA (D-sub 15 pin cable) PC

connection, the user must use shielded signal

interface cables with ferrite cores to maintain

standards compliance.

OOppttiioonnaall IInnssttaalllleerr RReemmoottee CCoonnttrrooll ffoorr MMooddeell NNoo.. SSeerriieess 2222//2266//3322LLGG33DDCCHH

There is an optional Installer remote control available for the 22/26/32LG3DCH models. The

installer remote control is NOT included with the TV.

Tilt Wall Mounting Bracket(AW-47LG30M)

(Only 32LG3DCH)

Wall Mounting Bracket(RW230)

(Only 26LG3DCH)

3322LLGG33DDCC oonnllyy

1.5V 1.5V

Remote Control,Batteries

1

2

3

4

5

6

7

8

0

-

9VOL

CH

ENTER

POWER

MUTEMENU

ADJUST

RETURN

CC

SAP

FLASHBK

PICTURESOUND

RATIO

TV

INPUT

TIMER

Bolts for stand assembly(Refer to P.11)

Screw for stand fixing(Refer to P.13)

x 4 x 4x 2

Torx plus Star head screw(Refer to P.11)

M4xL26(Machine Screw)

Ø4xL20(Plastic Screw)

Ø4xL20(Plastic Screw)

M4xL22(Machine Screw)

Wall Mounting Bracket(RW120)

(Only 22LG3DCH)

2222LLGG33DDCCHH oonnllyy

Copyright© 2007 LGE,All Rights Reserved.

Owner’s ManualPower Cord

CD Manual

Cable Management Clip(Refer to P.12)

2266//3322LLGG33DDCCHH,, 3322LLGG33DDCC oonnllyy

Protection Cover(Refer to P.11)

Protective Bracket andBolt for Power Cord

(Refer to P.12)(This feature is not available forall models.)

* Wipe spots on the exterior only with the pol-

ishing cloth.

* Do not wipe roughly when removing stains.

Excessive pressure may cause scratches or

discoloration.

Polishing Cloth(This feature is not avail-

able for all models.)

PR

EPA

RA

TIO

N

8

PREPARATION

FRONT PANEL INFORMATION Image shown may differ from your TV.

NOTE: If your TV has a protection tape attached, remove the tape.And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).

POWER Button

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the set is switched on.

CH

VOL

MENU

INPUT

ENTER

VOLUME (+, -)

Buttons

ENTER Button

MENU Button

INPUT Button

Remote Control Sensor

CHANNEL(+, -)

Buttons

POWER Button



Illuminates green when the set is switchedon.

Remote Control Sensor

Stand

26/32LG3DCH model

32LG3DC model

(only 32LG3DC)

22LG3DCH model

POWER Button



Illuminates green when the set isswitched on.

Remote Control SensorHeadphone

PR

EPA

RA

TIO

N

9

BACK PANEL INFORMATION Image shown may differ from your TV.

R

( )

1

11

AUDIO IN(RGB/DVI)VIDEO AUDIO

HDMI/DVI INUSB IN

SERVUCE ONLY

AV

IN 1

VIDEOMONO( )AUDIO

S-V

IDE

O

COM

PONE

NT

IN

RGB IN (PC)

RESETUPDATE

RS-232C IN(SERVICE ONLY)

REMOTECONTROL OUT

SPEAKER OUT8

AV IN 2

L/M

ONO

RA

UD

IOVI

DEO

H/P

PILLOWSPEAKER

NORMALSPEAKER

PILLOWSPEAKER S

PE

AK

ER

SW

ITC

H

PILLOWSPEAKER

NORMALSPEAKER

PILLOWSPEAKER S

PE

AK

ER

SW

ITC

H

12

AUDIO IN(RGB/DVI)VIDEO AUDIOAUDIO

HDMI/DVI INUSB INUSB IN

SERVUCE ONLYSERVUCE ONLY

AV

IN 1

VIDEOVIDEOMONO( )AUDIOAUDIO

S-V

IDE

O

COM

PONE

NTCO

MPO

NENT

IN

RGB IN (PC)

RESETUPDATE

RS-232C INRS-232C IN(SERVICE ONLY)(SERVICE ONLY)

REMOTECONTROL OUT

SPEAKER OUT8

R

PILLOWSPEAKER

NORMALNORMALSPEAKERSPEAKER

PILLOWPILLOWSPEAKERSPEAKER S

PE

AK

ER

SW

ITC

H

PILLOWSPEAKER

NORMALSPEAKER

PILLOWSPEAKER S

PE

AK

ER

SW

ITC

H

6

5

1

8

2 3

4

9 10

15 (only 26/32LG3DCH model)

For 32LG3DC26/32LG3DCH

R

( )

ANTENNA INANTENNA IN M.P.I.M.P.I.

7

13 14

PR

EPA

RA

TIO

N

10

PREPARATION

For 22LG3DCH

R

( )

ANTENNA INANTENNA IN M.P.I.M.P.I.

13 14

12

R

PILLOWSPEAKER

NORMALSPEAKER

PILLOWSPEAKER S

PE

AK

ER

SW

ITC

H

PILLOWPILLOWSPEAKERSPEAKER

HDMI/DVI INHDMI/DVI IN


USB INUSB INSERVUCE ONLYSERVUCE ONLY

REMOTEREMOTECONTROL OUTCONTROL OUT

AV IN AV IN

VID

EO

VID

EO

AUDI

OAU

DIO

MON

OM

ONO

(

)



SPEAKER SWITCHSPEAKER SWITCH

RESETRESET

UPDATEUPDATE

PILLOWSPEAKER


USB INSERVUCE ONLY

REMOTECONTROL OUT

AV IN

VID

EO

AUDI

OM

ONO

(

)

NORMALSPEAKER

PILLOWSPEAKERSPEAKER SWITCH

RESET

UPDATE

DV

I AU

DIO

IN

DV

I AU

DIO

IND

VI A

UD

IO IN15

15

2 5

1

3

4

9

COMPONENT IN (Except 22LG3DCH model)Analog Connection. Supports HD. Uses a red, green, and blue cable for video & a redand white cable for audio.

AUDIO IN (RGB/DVI) (Except 22LG3DCH model)1/8” headphone jack for analog PC audio input.

REMOTE CONTROL OUTIR output for controlling an auxiliary device.

SPEAKER OUT 8Ω (Except 22LG3DCH model)

H/PPlug the headphone into the headphone socket.

Power Cord SocketFor operation with AC power. Caution: Never attempt to operate the TV on DCpower.

ANTENNA INConnect over-the air signals to this jack.

M.P. I.

PILLOW SPEAKER (Except 32LG3DC model)Used to connect to pillow speaker.SPEAKER SWITCH (Except 32LG3DC model)Used to select the speaker output switch.Note: If Pillow Speaker is selected, no Sound will beheard from TV speakers.(NORMAL SPEAKER or PILLOW SPEAKER)

AV (Audio/Video) IN Analog composite connection. Supports standarddefinition video only (480i). Used for PC/DTV audio input jack (Only 22LG3DCH-UA model).S-VIDEO (Except 22LG3DCH model)Better quality than standard composite (yellowRCA cable). Supports standard definition videoonly (480i).

HDMI/DVI INDigital Connection. Supports HD video and Digitalaudio. Accepts DVI video using an adapter or HDMI toDVI cable (not included).

USB IN SERVICE ONLYUsed for software updates.

UPDATESoftware downloads and debug mode enable/dis-able.RESETHardware reset to PTC microcontroller.

RS-232C IN (SERVICE ONLY) Used for software updates.

RGB IN (PC) (Except 22LG3DCH model)Analog PC Connection. Uses a D-sub 15 pin cable(VGA cable).

1

2

3

4

5

9

8

6

10

11

12

13

14

15

7

PR

EPA

RA

TIO

N

11

STAND INSTRUCTION

Carefully place the TV screen side down on acushioned surface to protect the screen fromdamage.

Assemble the parts of the SSTTAANNDD BBOODDYY

with CCOOVVEERR BBAASSEE of the TV.

1

2

Insert the stand as shown.3

SSTTAANNDD BBOODDYY

CCOOVVEERR BBAASSEE

Image shown may differ from your TV.

GG Make sure the screws in the stand are fullytightened. (If not tightened fully, the productcould tilt forward and fall). But do not overtighten, over-tightening can damage the threadson the screws.

NOTE!

DETACHMENT (Only 32LG3DC)

Carefully place the TV screen side down on acushioned surface to protect the screen fromdamage.

1

Remove the four screws that hold the base on.2

Detach the stand from TV.3

After removing the stand, install the includedpprrootteeccttiioonn ccoovveerr over the hole for the stand.

Press the PPRROOTTEECCTTIIOONN CCOOVVEERR into the TVuntil you hear it click.

PROTECTION COVER (Except 22LG3DCH)

INSTALLATION (Only 32LG3DC)

4

or

x 4

Tighten the stand with thefour screws (provided as partsof the TV).

Tighten the two of these four screwsand the two Torx plus star head screws

(provided as parts of the TV) to secure the TV. Tightenthe two Torx plus star head screws with a star head dri-ver bit (not provided as parts of the TV).

x 2 x 2

PR

EPA

RA

TIO

N

12

PREPARATION

CABLE MANAGEMENT Image shown may differ from your TV.

Connect the cables as necessary.

To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with thePROTECTIVE BRACKET and the screw as

shown. It will help prevent the power cable

from being removed by accident.

Install the CABLE MANAGEMENT CLIP asshown.

CABLE MANAGEMENT CLIP

1

2

Put the cables inside the CABLE MANAGEMENT

CLIP and snap it closed.3

PROTECTIVE BRACKET

(This feature is not availablefor all models.)

GG Do not hold the CABLE MANAGEMENT CLIP when moving the TV.- If the TV is dropped, you may be injured or the product may be broken.

NOTE!

For 26/32LG3DCH, 32LG3DC

Install the CABLE MANAGEMENT CLIP asshown.

2

Connect the cables as necessary.

To connect additional equipment, see theEXTERNAL EQUIPMENT SETUP section.

Secure the power cable with thePROTECTIVE BRACKET and the screw as

shown. It will help prevent the power cable

from being removed by accident.

CABLE MANAGEMENT CLIP

1

Fit the CABLE MANAGEMENT CLIP as shown.3

How to remove the CABLE MANAGEMENT CLIP

GG Hold the CABLE MANAGE-

MENT CLIP with both handsand pull it backward.

For 22LG3DCH

PROTECTIVE BRACKET

(This feature is not availablefor all models.)

PR

EPA

RA

TIO

N

13

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4 inches on all four sides.

Image shown may differ from your TV.* This feature is not available for all models.

4 inches

4 inches

4 inches

4 inches

SWIVEL STAND (Only 32LG3DC)

The TV can be conveniently swivelled on its stand 90° to the left or right to provide the optimum viewing angle.

GG Ensure adequate ventilation by following the clearance recommendations.

GG Do not mount near or above any type of heat source.

CAUTION

ATTACHING THE TV TO A DESK (Only 32LG3DC)

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causinginjury or damaging the product. Use only the included screw.

GG To prevent TV from falling over, the TV should be securely attached to the floor/wall per installationinstructions. Tipping, shaking, or rocking the TV may cause injury.

WARNING

1-Screw(provided as parts of the product)

Desk

Stand

PR

EPA

RA

TIO

N

14

PREPARATION

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materi-als, please contact your nearest dealer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.

GG Do not install your wall mount kit while the TV is plugged in. It may result in personal injury due to electricshock.

CAUTION

GG Screw length needed depends on the wall mountused. For further information, refer to the instruc-tions included with the mount.

GG Standard dimensions for wall mount kits are shownin the table.

GG When purchasing our wall mount kit, a detailedinstallation manual and all parts necessary forassembly are provided.

GG Do not use screws longer then the standard dimen-sion, as they may cause damage to the inside tothe TV.

GG For wall mounts that do not comply with the VESA

standard screw specifications, the length of thescrews may differ depending on their specifica-tions.

GG Do not use screws that do not comply with theVESA standard screw specifications.Do not tighten the screws too much. It may dam-age the TV or allow the TV to a fall and cause per-sonal injury. LG is not liable for these kinds of acci-dents.

GG LG is not liable for TV damage or personal injurywhen a non-VESA or non specified wall mount isused or the consumer fails to follow the TV installa-tion instructions.

NOTE!

Product ModelVESA

(A * B) Standard Screw Quantity

26LG3DCH, 32LG3DCH 32LG3DC

200 * 100 M4 4LCD TV

AA

BB

GG To prevent injury, this apparatus must be securely attached to the wall in accordance with the installa-tion instructions.

WARNING

22LG3DCH 100 * 100 M4 4

PR

EPA

RA

TIO

N

15

SECURING THE TV TO THE WALL TO PREVENT FALLINGWHEN THE TV IS USED ON A STAND

We recommend that you set the TV close to a wall so it cannot fall over if pushed backwards.

Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,potentially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

Insert eye-bolts (or TV brackets and bolts) to attach the product to the wall as shown in the picture.

* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with screws (sold separately) to the wall. Match the height of the bracket thatis mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

Use a sturdy rope or cord (sold separately) to tie the product. It issafer to tie the rope so it becomes horizontal between the wall andthe product (the less slack in the rope, the better).

You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV.

* This feature is not available for all models.

GG Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

GG To use the TV safely, make sure that the height of the bracket on the wall and the one on the TV arethe same.

NOTE!

ANTENNA IN

ANTENNA IN

PR

EPA

RA

TIO

N

16

PREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable BoxConnection.

For optimum picture quality, adjust the direction if needed.

2. Cable

WallAntennaSocket

OutdoorAntenna(VHF, UHF)

Cable TVWall Jack

Multi-family Dwellings/Apartments(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wirewhen connecting the antenna.

Copper Wire

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance.

R

( )

To prevent damage do not connect to the power outlet until all connections are made between the devices.

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

17


HD RECEIVER SETUPThis TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However,

if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as

shown below.

Component Connection (Except 22LG3DCH)

1. How to connect

Connect the video outputs (Y, PB, PR) of the digital set-top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks onthe TV. Match the jack colors (Y = green, PB = blue, andPR = red).

Connect the audio output of the digital set-top box to

the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the TV.2

1

2. How to use Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

Select CCoommppoonneenntt input source using the IINNPPUUTT buttonon the remote control.

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

This part of EXTERNAL EQUIPMENT SETUP mainly uses the picture for 32LG3DC model.

( )

( )

AUDIO(RGB/DAUDIO IN(RGB/DVI)

HDMI/DVI INUSB IN

SERVUCE ONLY

VIDEOMONO( )AUDIO

S-V

IDE

OS

-VID

EO

RGB IN (PCRGB IN (PC)

RESETUPDATE

RS-232C I(SERVICE O


REMOTECONTROL OUT

SPEAKER OUT8

AV

IN 1

AV

IN 1

VIDEO AUDIO

COM

PONE

NT

IN

Y L RPB PR

RESETUPDATE

1 2

Y, CB/PB, CR/PR

Supported Resolutions

Horizontal Vertical Frequency(KHz) Frequency(Hz)

15.73 59.9415.73 60.00

31.47 59.9431.50 60.00

44.96 59.9445.00 60.00

33.72 59.9433.75 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

Signal

480i

480p

720p

1080i

1080p

Component

Yes

Yes

Yes

Yes

No

HDMI

Yes

Yes

Yes

Yes

Yes

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

18


HDMI Connection

Connect the digital set-top box to HHDDMMII//DDVVII IINN

jack on the TV.

No separate audio connection is necessary.

HDMI supports both audio and video.

1. How to connect

2. How to use Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

Select HHDDMMII input source with using the IINNPPUUTT buttonon the remote control.

2

1

HDMI-DTV


15.73 59.9415.73 60.00

31.469 59.9431.500 60.00

44.96 59.9445.00 60.00

33.72 59.9433.75 60.00

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p

( )

( )

AUDIO IN(RGB/DVI)

( ) RGB IN (PC)

RESETUPDATE


REMOTECONTROL OUT

SPEAKER OUT8

HDMI/DVI INUSB IN

SERVUCE ONL

VIDEOMONO( )AUDIO

S-VI

DEO

S-VI

DEO

RESETUPUPDATE

AV IN

1AV

IN 1

VIDEO AUCOM

PONE

NT

IN

HDMI-DTV OUTPUT

1

720x480i

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

19

DVI to HDMI Connection

( )

( )

AUDIO IN(RGB/DVI)

( ) RGB IN (PC)

RESETUPDATE


REMOTECONTROL OUT

SPEAKER OUT8

RESETUPDATE

AUDIO IN(RGB/DVI)AUDIO IN(RGB/DVI)

HDMI/DVI INUSB IN

SERVUCE ONLY

VIDEOMONO( )AUDIO

S-VI

DEO

S-VI

DEO

RGB IN (PC)



AV IN

1AV

IN 1

VIDEO AUDIOCOM

PONE

NT

IN

L RDVI-DTV OUTPUT L R

1

2

GG A DVI to HDMI cable or adapter is required for thisconnection. DVI doesn't support audio, so a separateaudio connection is necessary.

NOTE!

Connect the DVI output of the digital set-top box tothe HHDDMMII//DDVVII IINN jack on the TV.

Connect the audio output of the digital set-top box tothe AAUUDDIIOO IINN((RRGGBB//DDVVII)) or AAVV IINN AAUUDDIIOO jackon the TV.

1. How to connect

2. How to use Turn on the digital set-top box. (Refer to the owner’s man-

ual for the digital set-top box.)

Select the HHDDMMII input source on the TV using the IINNPPUUTT

button on the remote control.

2

1

PILLOWSPEAKER




AV IN 1AV IN 1

AUDI

OAU

DIO

MON

OM

ONO

(

)

RESETRESET

UPDATEUPDATE

AUDI

OAU

DIO

MON

OM

ONO

(

)

L RDVI-DTV OUTPUT L R

LNORMALRSPEAKER

PILLOWSPEAKER

HSPEAKER SWITCH

DV

I AU

DIO

IND

VI A

UD

IO IN

AV IN AV IN

VID

EO

VID

EO

HDMI/DVI INHDMI/DVI IN

1

2

22LG3DCH model

26/32LG3DCH, 32LG3DC model

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

20


DVD SETUP

Component Connection (Except 22LG3DCH)

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV Y PB PR

Video output ports

on DVD player

Y

Y

Y

Y

PB

B-Y

Cb

Pb

PR

R-Y

Cr

Pr

Connect the video outputs (Y, PB, PR) of the DVD to theCCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the TV.

Match the jack colors (Y = green, PB = blue, and PR = red).

Connect the audio outputs of the DVD to the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the TV.

1. How to connect

2. How to use

Turn on the DVD player, insert a DVD.

Select the CCoommppoonneenntt input source on the TV using theIINNPPUUTT button on the remote control.

Refer to the DVD player's manual for operating instructions.

2

1

( )

( )

AU(RGAUDIO IN(RGB/DVI)

HDMI/DVI INUSB IN

SERVUCE ONLY

VIDEOMONO( )AUDIO

S-V

IDE

OS

-VID

EO

RGB INRGB IN (PC)

RESETUPDATEUPDATE

RS-23(SERVIC


REMOTECONTROL OUT

SPEAKER OUT8

AV

IN 1

AV

IN 1

VIDEO AUDIO

COM

PONE

NT

IN

Y L RPB PR

RESETUPDATE

1 2

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

21

S-Video Connection (Except 22LG3DCH)

HDMI Connection

Connect the HDMI output of the DVD to theHHDDMMII//DDVVII IINN jack on the TV.

No separate audio connection is necessary.

HDMI supports both audio and video.

1. How to connect

2. How to use

Select the HHDDMMII input source on the TV using theIINNPPUUTT button on the remote control.


2

1

( )( )

( )

L RS-VIDEOAUDIO

HDMI/DVI INUSB IN

SERVUCE ONLY

VIDEOMONO( )AUDIO

AV IN

1AV

IN 1

VIDEO AUDIO

COM

PONE

NT

INS-

VID

EO

1 2

HDMI/DVI INUSB IN

SERVUCE ONLY

VIDEOMONO( )AUDIO

S-VI

DEO

S-VI

DEO

RESETUPDUPDATE

AV IN

1AV

IN 1

VIDEO AUDICOM

PONE

NT

IN

HDMI OUTPUT

1

Connect the S-VIDEO output of the DVD to theSS --VVIIDDEEOO input on the TV.

Connect the audio outputs of the DVD to the AAUUDDIIOO

input jacks on the TV.

1. How to connect

2. How to use Turn on the DVD player, insert a DVD.

Select the AAVV11 input source on the TV using the IINNPPUUTT



2

1

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

22


VCR SETUP

Antenna Connection

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the

screen. This phenomenon is common to all TVs and is not covered by warranty.

L RS-VIDEO VIDEO

OUTPUTSWITCH

ANT IN

ANT OUT

ANTENNA IN M.P.I.

( )

( )

Wall Jack

Antenna

1

2

Connect the RF antenna out socket of theVCR to the AANNTTEENNNNAA IINN socket on theTV.

Connect the antenna cable to the RFantenna in socket of the VCR.

1. How to connect

2. How to use

Set VCR output switch to 3 or 4 and thentune TV to the same channel number.

Insert a video tape into the VCR and pressPLAY on the VCR. (Refer to the VCR owner’smanual.)

2

1

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

23

Composite (RCA) Connection

Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV andVCR. Match the jack colors (Video = yellow, Audio Left= white, and Audio Right = red)

1. How to connect

2. How to use

Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)

Select the AAVV or AAVV11 input source on the TV using theIINNPPUUTT button on the remote control.

If connected to AAVV IINN22, select AAVV22 input source on the TV(Except 22LG3DCH).

1

2. How to use

Insert a video tape into the VCR and press PLAY on theVCR. (Refer to the VCR owner’s manual.)

Select the AAVV11 input source on the TV using the IINNPPUUTT


GG If you have a mono VCR, connect the audio cablefrom the VCR to the AAUUDDIIOO LL((MMOONNOO)) jack ofthe TV.

NOTE!

ANTENNA IN M.P.I.

AUDIO(RGB/

VIDEOMONO( )AUDIO RGB IN (P

AV IN

1AV

IN 1

VIDEO AUDIOCOM

PONE

NT

INS-

VID

EO

LR S-VIDEOVIDEO

OUTPUTSWITCH

ANT IN

ANT OUT

1

S-Video Connection (Except 22LG3DCH)

Connect the SS --VVIIDDEEOO output of the VCR to theSS --VVIIDDEEOO input on the TV.

Connect the audio outputs of the VCR to the AAUUDDIIOO

input jacks on the TV.

1. How to connect

2

1

ANTENNA IN M.P.I.

VIDEOMONO( )AUDIO R

AV IN

1AV

IN 1

VIDEO AUDIO

COM

PONE

NT

INS-

VID

EO

( )

L RS-VIDEO VIDEO

OUTPUTSWITCH

ANT IN

ANT OUT

12

GG Do not connect to both Videoand S-Video at the same time. Inthe event that you connect bothVideo and the S-Video cables,only the S-Video will work.

CAUTION

GG S-Video provides better quality than composite. Useit when available.

NOTE!

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

24


OTHER A/V SOURCE SETUPR

AV IN 2

L/M

ONO

RA

UD

IOVI

DEO

H/P

L RVIDEO

Camcorder

Video Game SetConnect the AAUUDDIIOO/VVIIDDEEOO jacksbetween TV and external equipment.Match the jack colors.

(Video = yellow, Audio Left = white, andAudio Right = red)

1. How to connect

2. How to use

Select the AAVV22 input source on the TV using theIINNPPUUTT button on the remote control. (Except22LG3DCH)

If connected to AAVV IINN or AAVV IINN11 input, selectthe AAVV or AAVV11 input source on the TV.

Operate the corresponding external equipment.

1

1


PILLOWSPEAKER

NRS-232C INY)(SERVICE ONLY)

USB INSERVUCE ONLY

EMOTEREMOTETROL OUTCONTROL OUT

RESETRESET

UPDATEUPDATE

N

VID

EO

VID

EO

AUDI

OAU

DIO

MON

OM

ONO

(

)

L RVIDEO

PILLOWSPEAKER


USB INSERVUCE ONLY

REMOTECONTROL OUT

AV IN

VID

EO

AUDI

OM

ONO

(

)

NORMALSPEAKER


RESET

UPDATE

DV

I AU

DIO

IND

VI A

UD

IO IN

DV

I AU

DIO

IN

NORMALSPEAKER


AV IN AV IN

Video Game Set

1

Camcorder

22LG3DCH model

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

25

PILLOW SPEAKER SETUP Connect a pillow speaker to the LCD TV/Monitor.



PILLOWPILLOWSPEAKERSPEAKER S

PE

AK

ER

SW

ITC

HS

PE

AK

ER

SW

ITC

H

(Except 32LG3DC)

1. How to connect

Connect the PPIILLLLOOWW SSPPEEAAKKEERR output jack on theback of the TV.

Connect an acccessory pillow speaker or wired remotecontrol unit to this 6-pin jack.

Select PPIILLLLOOWW SSPPEEAAKKEERR on the rear panel of theTV.

2

1

3

NOTE: If the pillow speaker switch is set to Pillow Speaker, nosound will be heard from the TV speakers. Also, Auto Volume willbe grayed out and not accessible on the Sound menu.

Use a pillow speaker that is a UL recognized pendant controlbearing the warning: “Risk of fire if used in oxygen enriched atmosphere. Keep pen-dant control away from oxygen equipment.”

Controlling the TV with Serial DataThe TV is capable of being controlled by a single-wire, serial datasignal. This is a LG patented technology and is being implementedby certain brands of “smart” pillow speakers.

Pillow Speaker Interface This connector furnishes three control lines and an audio output.A patient-pendant remote control, or entertainment audio andnurse call system may be connected here. All lines are isolatedfrom the AC power line and earth ground. (Optoisolators isolatethe control lines, and a transformer isolates the audio. There areno relays or inductive components in the control lines.)

Controlling the TV with Mechanical Switches

Pin 4(common) is momentarily connected to pin1, 3, or 6 via push-action switches to controlOn/Off and Channel Up/Down. These pins areat +13volts DC(when measured from pin4) withthe switches open. Current draw is 8 mA when aswitch is closed. (This operation is identical toprevious LG models using the 5-Wire Interfaceexcept that only +7 volts DC was supplied andcurrent draw was only 2.5 mA.)

pin No.

1

2

3

4

5

6

External TV On/Off switch.(Not used.)External Channel Up switch or Data in.Common connection for control, data, andaudio output. Impedance to earth ground is a10-meg resistor in parallel with a 1100 pfcapacitor.Isolated audio output. Nominal 14-ohm sourceimpedance with short circuit protection.Intended for a pillow speaker with a low-impeance pad-type volume control.External Channel Down switch.

Purpose

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

26


PC SETUP


31.469 70.08

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.776 59.87

47.712 60.0147.720 59.799

47.130 59.65

GG To get the the best picture quality, adjust the PCgraphics card to 1360x768.

GG Depending on the graphics card, DOS mode maynot work if a HDMI to DVI Cable is in use.

GG In PC mode, there may be noise associated with theresolution, vertical pattern, contrast or brightness.If noise is present, change the PC output to anoth-er resolution, change the refresh rate to anotherrate or adjust the brightness and contrast on thePICTURE menu until the picture is clear.

GG Avoid keeping a fixed image on the screen for along period of time. The fixed image could becomepermanently imprinted on the screen.

GG The synchronization input form for Horizontal andVertical frequencies is separate.

GG Depending on the graphics card, some resolutionsettings may not allow the image to be positionedon the screen properly.

NOTES!

Supported Display Specifications(RGB-PC, HDMI-PC)

Resolution

720x400

1360x768

640x350

640x480

800x600

1024x768

1366x768

1280x768

* Only RGB-PC mode

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

VGA (D-Sub 15 pin) Connection (Except 22LG3DCH)

RGB OUTPUT AUDIO


VIDEONO( ) RGB IN (PC)RGB IN (PC)

REMOTCONTROLAUDIOAUDIO

1

22. How to use

Turn on the PC and the TV.

Select the RRGGBB input source on the TV using the IINNPPUUTT


Connect the VGA output of the PC to the RRGGBBII NN((PP CC)) jack on the TV.

Connect the PC audio output to the AAUUDDIIOO IINN((RRGGBB//DDVVII)) jack on the TV.

1. How to connect

2

1

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

27

DVI to HDMI Connection

( )

( )

( )


HDMI/DVI INUSB IN

SERVUCE ONLY

VIDEOMONO( )AUDIO

S-VI

DEO

S-VI

DEO

RGB IN (PC)

UPDATE


AV IN

1AV

IN 1

VIDEOVIDEO AUDIOAUDIO

COM

PONE

NT

INDVI-PC OUTPUT AUDIO

1

22. How to use

Turn on the PC and the TV.

Select the HHDDMMII input source on the TV using the IINNPPUUTT


Connect the DVI output of the PC to the HHDDMMII//DDVVIIIINN jack on the TV.

Connect the PC audio output to the AAUUDDIIOO II NN((RRGGBB//DDVVII)) or AAVV IINN AAUUDDIIOO jack on the TV.

1. How to connect

2

1


PILLOWSPEAKER




AV IN 1AV IN 1AU

DIO

AUDI

OM

ONO

MON

O(

)

UPDATEUPDATE

RESETRESET

AUDI

OAU

DIO

MON

OM

ONO

(

)

DVI-PC OUTPUT AUDIO

DV

I AU

DIO

IND

VI A

UD

IO IN

LNORMALRSPEAKER


HDMI/DVI INHDMI/DVI INAV IN AV IN

VID

EO

VID

EO

1

2

22LG3DCH model

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

28


Screen Setup for PC mode (Except 22LG3DCH)

Select the desired resolution.

1024 x 768

1280 x 768

1360 x 768

1366 x 768

Auto config.

Resolution G

Position

Size

Phase

Reset

Screen Move Prev.MENU

1ADJUST

3

4

2

ENTER

RETURN

Select RReessoolluuttiioonn.

Selecting Resolution

You can choose the resolution in RGB mode.

The PPoossiittiioonn, PPhhaassee, and SSiizzee can also be adjusted.

Press the AADDJJUUSSTT button.

Return to TV viewing.

You can also adjust SSccrreeeenn((RRGGBB--PPCC))

in the PPIICCTTUURREE menu.

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

29

Auto Configure

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still

not correct, try using the manual settings or a different resolution or refresh rate on the PC.

Select AAuuttoo ccoonnff iigg...

Auto config. G

Resolution

Position

Size

Phase

Reset


To Set

3

2

Select YYeess.

4

ENTER

Start Auto Configuration.ENTER


1

• If the position of the image is still notcorrect, try Auto adjustment again.

• If picture needs to be adjusted againafter Auto adjustment in RGB, you canadjust the PPoossiitt iioonn, SSiizzee or PPhhaassee.

Yes No

ADJUST

EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

30


Adjustment for screen Position, Size, and Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture

phase manually.

This feature operates only in RGB mode.

Make appropriate adjustments.

Auto config.

Resolution

Position G

Size

Phase

Reset

GF

D

E


3ENTER

4RETURN

PPoossiitt iioonn: This function is to adjust pic-ture to left/right and up/down as youprefer.

SSiizzee: This function is to minimize anyvertical bars or stripes visible on thescreen background. And the horizontalscreen size will also change. The SSiizzee

adjustment range is --3300 ~ 3300.

PPhhaassee: This function allows you toremove any horizontal noise and clear orsharpen the image of characters. ThePPhhaassee adjustment range is --3322 ~ 3311.


Select PPoossiitt iioonn, SSii zzee, or PPhhaassee.

1ADJUST

2


EX

TE

RN

AL E

QU

IPM

EN

T S

ET

UP

31

Screen Reset (Reset to original factory values)

Returns PPoossiitt iioonn, SSiizzee, and PPhhaassee to the default factory settings.

This feature operates only in RGB mode.

3ENTER

Select RReesseett.

1ADJUST

2

Select YYeess.

4ENTER

Auto config.

Position

Resolution

Size

Phase

Reset G


Initialize Settings.

Yes No


WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

32

REMOTE CONTROL FUNCTIONS


When using the remote control, aim it at the remote control sensor on the TV.

1 2 3

4 5 6

7 8

0-

9

VOL CH

ENTER

POWER

MUTE

MENUADJUST RETURN

CC

SAP

FLASHBK

PICTURE SOUND RATIO

TV INPUT

TIMER

POWER

TV

INPUT

PICTURE

SOUND

SAP

RATIO

Turns your TV on or off.

In AV1-2, Component, RGB, and HDMI input sources, screenreturns to the last TV channel.

External input modes rotate in regular sequence: TV, AV1-2, Component, RGB, and HDMI.

Selects the factory preset picture depend on the viewingenvironment. GG pp..4455

Selects the factory preset sound for type of program.

GG pp..5555

Analog mode: Selects MTS sound (Mono, Stereo, or aSAP) GG pp..6611

DTV mode: Changes the audio language.

Change the aspect ratio. GG pp..4422

THUMBSTICK(Up/Down/Left

Right/ENTER)

Navigate the on-screen menus and adjust the system set-tings to your preference.

(Only 32LG3DC)

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

33

Installing Batteries

Open the battery compartment cover on the back side and installthe batteries matching correct polarity (+with +,-with -).

Install two 1.5V AAA batteries. Don’t mix old or used batteries withnew ones.

Close cover.

NUMBER button

— (DASH)

FLASHBK

Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.

Tune to the last channel viewed.

VOLUME UP/DOWN

TIMER

CC

MUTE

CHANNELUP/DOWN

ADJUST

MENU

RETURN

Increase/decrease the sound level.

Select the amount of time before your TV turns off automatically. GG pp..7700

Select a closed caption. GG pp..6644

Switch the sound on or off. GG pp..3355

Select available channels.

Adjust the screen resolution, position, size and phase. GG pp..2288 -- pp..3311

Displays the main menu.

Allows the user to move return one step in an interactive application or other user interac-tion function.

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

34


TURNING ON TV


NOTE!

GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

First, connect power cord correctly.

At this moment, the TV switches to standby mode.

In standby mode to turn TV on, press the button on the TV or pressthe PPOOWWEERR button on the remote control.

Note: Only for 32LG3DCH the TV also turn on with CCHH ((++ or --))

button on the remote.

Select the viewing source by using the IINNPPUUTT button on the remote control.

This TV is programmed to remember which power state it was last set to,even if the power cord is out.

When finished using the TV, press the PPOOWWEERR button on the remote con-trol. The TV reverts to standby mode.

1

2

3

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

35

Press the CCHH ((++ or --)) or NNUUMMBBEERR buttons to select a channel number.1

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the VVOOLL ((++ or --)) button to adjust the volume.

If you want to switch the sound off, press the MMUUTTEE button.

You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((++ or --))

button.

Adjust the volume to suit your personal preference.

1

2

3

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

36


ON-SCREEN MENUS SELECTION

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Display each menu.

Select a menu item.

Enter to the pop up menu.

1MENU

3

2ENTER

ENTER


4MENU

EnterMoveCHANNEL

CHANNEL

TIME

PICTURE

OPTION

AUDIO

LOCK

EnterMove

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

E

EnterMove

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

• SRS TruSurround XT: Off

• Treble 50

• Bass 50

• Reset

AUDIO

E

L R

EnterMove

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

TIME EnterMove

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

R G

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

EnterMove

Language : English

Caption : Off

OPTION

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

37

CHANNEL SETUP

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the

channel list.

Run Auto Tuning again after any Antenna/Cable connection changes.

Select CCHHAANNNNEELL.

Select AAuuttoo TTuunniinngg.

Select YYeess.

Run AAuuttoo ttuunniinngg.

1MENU

3

2ENTER

ENTER

4ENTER

A password is required to gain access toAuto Tuning menu if the Lock System isturned on.

5RETURN Return to the previous menu.

MENU Return to TV viewing.

EnterMoveCHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

EnterMoveCHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel LabelPress ‘Yes’ button to beginauto tuning.

Yes

No

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

38


Select CCHHAANNNNEELL.1

MENU

2ENTER

If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality

of the signal being received.

Add/Delete Channel (Manual Tuning)

Select MMaannuuaall TTuunniinngg.

Select DDIIGGIITTAALL or AANNAALLOOGG.

Select channel you want to addor delete.

3ENTER

4

Select AAdddd or DDeelleettee.5

ENTER

A password is required to gain access toManual Tuning menu if the Lock Systemis turned on.



EnterMoveCHANNEL EnterMoveCHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Channel

Select channel type and RF-channel number.

FF DIGITAL GG

FF 2 GG

Close

Delete

DIGITAL 2-1

Bad Normal Good

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

39

Select a channel.

Select channel you want to add or delete.

3ENTER

4ENTER

A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom

List are displayed in black and the channels deleted from the Custom List are displayed in gray.

Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-

right corner of the screen.

Channel Editing

Select CCHHAANNNNEELL.1

MENU

2ENTER Select CChhaannnneell EEddiitt.

RETURN Return to TV viewing.

Return to the previous menu.5

MENU

Add/Delete Move PageCHMove Previous RETURN EXITMENU

EnterMoveCHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

+

WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

40


CHANNEL LABEL

Choose preset labels for your channels.

If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a

channel even if you didn't preset a label for the channel.

EnterMoveCHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

EnterMoveCHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel LabelLogo FF Disney GG

Channel DIGITAL 2-1

Close

Select CCHHAANNNNEELL.

Select CChhaannnneell LLaabbeell.

Select Channel.

1MENU

3

2ENTER

ENTER

Select the appropriate logo for the channel.

5

Select a channel to set logo.4



WA

TC

HIN

G T

V / C

HA

NN

EL C

ON

TR

OL

41

INPUT LIST

Select the desired input source.1

INPUT

TV AV1 AV2

ComponentHDMI RGB

TV AV1 AV2 Component RGB

ENTER

TT VV: Select it to watch over-the-air, cableand digital cable broadcasts.

AAVV11--22: Select them to watch a VCR orother external equipment.

CCoommppoonneenntt: Select them to watchDVD or a Digital set-top box.

RRGGBB: Select it to view PC input.

HHDDMMII: Select them to watch high defin-ition devices.

TV AV

HDMI

For 26/32LG3DCH

32LG3DC

For 22LG3DCH

PIC

TU

RE

CO

NT

RO

L

42

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

RGB input source use 4:3 or 16:9 aspect ratio.

NOTE!

GG If a fixed image is displayed on the screen for a long time, the image could become imprinted on thescreen and remain visible. This phenomenon is rare on LCDs, but is possible when the image is on thescreen for a very long time. This phenomenon is common to all manufacturers and is not covered bywarranty. When watching video that does not fill the screen, any after-image from the black bars willnormally dissipate after a few minutes.

Press the RRAATTIIOO button repeatedly to select the picture options

: SSeett BByy PPrrooggrraamm,, 44::33,, 1166::99,, FFuull ll(Only 22LG3DCH),, ZZoooomm11,, ZZoooomm22,,JJuusstt SSccaann.

1RATIO

2RETURN Return to TV viewing.

1166::99

You can also adjust AAssppeecctt RRaattiioo inthe PPIICCTTUURREE menu.

Set by program

Selects the proper picture proportion to matchthe source’s image.

4:3

Choose 4:3 when you want to view a picturewith an original 4:3 aspect ratio.

16:9

Adjust the picture horizontally, in a linear pro-portion to fill the entire screen.

Full (Only 22LG3DCH)

When TV receives the wide screen signal, it will leadyou to adjust the picture horizontally or vertically,in a linear proportion, to fill the entire screen fully.

PIC

TU

RE

CO

NT

RO

L

43

(4:3 4:3)

(16:9 16:9)

PIC

TU

RE

CO

NT

RO

L

44

PICTURE CONTROL

Zoom 1

Choose Zoom 1 when you want to view the pic-ture without any alteration. However, the top andbottom portions of the picture will be cropped.

Zoom 2

Choose Zoom 2 when you want the picture to bealtered, both vertically extended and cropped.The picture taking a halfway trade off betweenalteration and screen coverage.

Just Scan

Normally the edges of video signals are cropped1-2%. Just Scan turns off this cropping andshows the complete video.

Notes: If there is noise on the edges of the originalsignal, it will be visible when Just Scan is activated.

JJuusstt SSccaann operates only withDTV/CADTV/HDMI-DTV/DVI-DTV(720p/1080i/1080p),Component(720p/1080i) input sources.

PIC

TU

RE

CO

NT

RO

L

45

PRESET PICTURE SETTINGS

Picture Mode - Preset

There are factory presets for picture settings available in the user menus. You can use a preset, change each

setting manually.

1PICTURE Press the PPIICCTTUURREE button repeatedly to select the picture options

: VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, GGaammee and EExxppeerrtt11--22.

You can also adjust PPiiccttuurree MMooddee inthe PPIICCTTUURREE menu.


2RETURN

VViivviidd

PIC

TU

RE

CO

NT

RO

L

46

PICTURE CONTROL

Color Tone - Preset

Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to

cool to see less intense colors with more blue.

Select PPIICCTTUURREE.

Select CCoolloorr TTeemmppeerraattuurree.

1MENU

3ENTER

Select CCooooll, MMeeddiiuumm, or WWaarrmm.4

Select AAddvvaanncceedd CCoonnttrrooll.2

ENTER



EnterMovePICTURE

EE

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

Color Temperature FF Medium GG

Fresh Contrast Off

Fresh Color Off

Noise Reduction Auto

Gamma Medium

Black Level Medium

Real Cinema Off

Close

PIC

TU

RE

CO

NT

RO

L

47

MANUAL PICTURE ADJUSTMENT

Picture Mode - User Mode

Adjust the picture appearance to suit your preference and viewing situations.



Select BBllaacckklliigghhtt,, CCoonnttrraasstt,, BBrriigghhttnneessss,,SShhaarrppnneessss,, CCoolloorr,, oorr TTiinntt..

1MENU

Select PPiiccttuurree MMooddee.

2ENTER

Select VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee.

3ENTER

4ENTER

5ENTER



EnterMovePICTURE

E

Aspect Ratio : 16:9


• Backlight 90

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Backlight 80

EE

EE

EE

EE

Enter

R G

MENU

PIC

TU

RE

CO

NT

RO

L

48

PICTURE CONTROL

Picture Mode - Expert Control

Select your desired menu option.


Select PPiiccttuurree MMooddee.

Select EExxppeerrtt CCoonnttrrooll.

Select EExxppeerrtt11 or EExxppeerrtt22.

1MENU

3

2ENTER

ENTER

4ENTER

5ENTER

Make appropriate adjustments.6

EExxppeerrtt11 and EExxppeerrtt22 allow you set you own custom settings.



EnterMovePICTURE

E

Aspect Ratio : 16:9


• Backlight

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

R G

EnterMovePICTURE

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

E

MENU

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Expert Control

• Reset

Screen (RGB-PC)

R G

FF Off GGFresh Contrast

Noise Reduction Off

Gamma Medium

Black Level Auto

OffReal Cinema

Color Standard HD

White Balance Normal

Red Contrast 50

E

PIC

TU

RE

CO

NT

RO

L

49

PICTURE IMPROVEMENT SETTINGS

Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection.

Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors.

Noise Reduction: Removes interference up to the point where it does not damage the original picture.

Gamma: High gamma values display whitish images and low gamma values display high contrast images.


Select AAddvvaanncceedd CCoonnttrrooll.

Select FFrreesshh CCoonnttrraasstt, FFrreesshh CCoolloorr,NNooiissee RReedduuccttiioonn, or GGaammmmaa.

1MENU

3

2ENTER

ENTER



Select your desired options.

4

EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

MENU


Fresh Contrast Off

Fresh Color Off


Gamma Medium

Black Level Medium

Real Cinema Off

Close

Medium

FF Off GG

PIC

TU

RE

CO

NT

RO

L

50

PICTURE CONTROL

ADVANCED CONTROL - BLACK (DARKNESS) LEVEL

Adjusting the contrast and the brightness of the screen using the black level of the screen.

This feature is disable in DTV and RGB mode.



Select BBllaacckk LLeevveell.

1MENU

3

2ENTER

ENTER

Select LLooww or HHiigghh.

4

LLooww: The reflection of the screen getsdarker.

HHiigghh: The reflection of the screen getsbrighter.

AAuuttoo: Realizing the black level of thescreen and set it to High or Low auto-matically.



EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

Medium

OffOff

Color Temperature

Fresh Contrast Off

Fresh Color Off


Gamma Medium

Black Level

Close

Real Cinema Off

FF Low GG

PIC

TU

RE

CO

NT

RO

L

51

ADVANCED CONTROL - REAL CINEMA

Set up the TV for the best picture appearance for viewing movies.

When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps

video from movies to 30 fps video for display.

This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV/AV1-2, Component 480i/1080i,

and HDMI 480i/1080i mode.



Select RReeaall CCiinneemmaa.

1MENU

3

2ENTER

ENTER

Select OO nn or OOff ff.

4



EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)


Fresh Contrast Off

Fresh Color Off


Gamma Medium

Black Level Medium

Close

Real Cinema Off

Medium

FF Off GG

PIC

TU

RE

CO

NT

RO

L

52

PICTURE CONTROL

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.


Select RReesseett.

Initialize the adjusted value.

1MENU

3

2ENTER

ENTER


EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

EnterMovePICTURE

E

R G

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0


• Reset

Screen (RGB-PC)

Resetting video configuration...ii

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

53

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a

regular TV program.

Select AAUUDDIIOO.

Select AAuuttoo VVoolluummee.


1MENU

3

2ENTER

ENTER



EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

L R L R

Off

On

E E

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

54

CLEAR VOICE

By differentiating the human sound range from others, it improves the sound quality of voices.

If you select “CClleeaarr VVooiiccee--OOnn”, SSRRSSTTrruuSSuurrrroouunndd XXTT feature will not work.

Select AAUUDDIIOO.

Select CClleeaarr VVooiiccee.


1MENU

3

2ENTER

ENTER



EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

L R L R

Off

On

E E

SOUND &LANGUAGE CONTROL

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

55

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate

sound options based on the program content.

SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, and GGaammee are preset for optimum sound quality at the factory and are

not adjustable.

1SOUND

Press the SSOOUUNNDD button repeatedly to select the sound options

: SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, and GGaammee.

You can also adjust SSoouunndd MMooddee inthe AAUUDDIIOO menu.


2RETURN

SSttaannddaarrdd

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

56


SOUND SETTING ADJUSTMENT - USER MODE

Adjust the sound to suit your taste and room situations.

Select AAUUDDIIOO.

Select SSoouunndd MMooddee.

Select TTrreebbllee or BBaassss.

1MENU

4

2ENTER

Select SSttaannddaarrdd, MMuussiicc,CCiinneemmaa, SSppoorrtt, or GGaammee.

3ENTER

ENTER

Make appropriate adjustments.5

ENTER



EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

L R L R

Close

EE

EE

Treble 50

Bass 50

SRS TruSurround XT Off

E E

EnterMoveAUDIO

L R

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

57

SRS TRUSURROUND XT

Select AAUUDDIIOO.

Select SSRRSS TTrruuSSuurrrroouunndd XXTT.


1ENTER

3

2ENTER

ENTER



EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

L R

E E

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

Treble 50

Bass 50

Close

SRS TruSurround XT OffFF Off GG

Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialogclarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experi-ence from standard stereo material.

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

58


BALANCE

Select AAUUDDIIOO.

Select BBaallaannccee.


1MENU

3

2ENTER

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.



EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

L R L R

Close

EE

EE

Balance 0 L R

E E

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

59

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.

Select AAUUDDIIOO.

Select TTVV SSppeeaakkeerr.


1MENU

3

2ENTER

ENTER



EnterMoveAUDIO

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

TV Speaker : On

EnterMoveAUDIO

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

TV Speaker : On

L R L R

E E

Off

On

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL


60

AUDIO RESET

Settings of the selected Sound Mode return to the default factory settings.

Select AAUUDDIIOO.

Select RReesseett.

1MENU

2ENTER

Initialize the adjusted value.

3ENTER

EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

EnterMoveAUDIO

Auto Volume : Off

Clear Voice : On

Balance 0



• Treble 50

• Bass 50

• Reset

L R L R

E E

Resetting audio configuration...ii

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

61

Each time you press the SSAAPP button,

MMoonnoo, SStteerreeoo, or SSAAPP appear in turn.


1 SAP

2

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-

panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used

if the broadcast is only in Mono.

If other languages available on the digital signal,select them with the SSAAPP button.

RETURN

MONO SAPSTEREO

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL


62

EnterMoveOPTION EnterMoveOPTION

AUDIO LANGUAGE

Other languages may be available if a digital signal is provided by the broadcasting station.

This feature operates only in DTV/CADTV mode.

Select OOPPTTIIOONN.

Select LLaanngguuaaggee.

Select AAuuddiioo.

1MENU

3

2ENTER

ENTER

Select your desired language:EEnnggll iisshh, SSppaanniisshh, or FFrreenncchh

4



Language : English

Caption : OffMenu English

Audio FF English GG

Close

Language : English

Caption : Off

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

63

EnterMoveOPTIONEnterMoveOPTION

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.


Select LLaanngguuaaggee.

Select MMeennuu.

1MENU

3

2ENTER

ENTER

Select your desired language.

From this point on, the on-screen menuswill be shown in the selected language.

4



Language : English

Caption : Off

Language : English

Caption : OffMenu FF English GG

Audio English

Close

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

64


CAPTION MODECaption must be provided to help people with hearing loss watch TV.

This feature operates only in TV, AV/AV1-2 mode.

Select Caption OO nn or OOff ff.1

cc When selecting OOff ff, Sub-menus forAnalog, DTV, and Digital Optionbecome disabled.

Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-

tioning information if provided on a program. Analog caption displays information at any position on the screen

and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both

digital and analog channels on the Antenna/Cable.

Analog Broadcasting System Captions


Select CCaappttiioonn.

Select OO nn.

1MENU

3

2ENTER

ENTER

Select CCCC11-44 or TTeexxtt11-44.

4

CCAAPPTTIIOONN

The term for the words that scrollacross the bottom of the TV screen;usually the audio portion of the pro-gram provided for the hearing impaired.

TTEEXXTT

The term for the words that appear in alarge black frame and almost cover theentire screen; usually messages provid-ed by the broadcaster.5

RETURN Return to the previous menu.


EnterMoveOPTION

Mode CC1

Close

Digital Option

FF On GG

Language : English

Caption : CC1

EnterMoveOPTION

Language : English

Caption : Off

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

65

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions to appear in.

Other Languages can be chosen for digital sources only if they are included on the program.

This function in only available when Caption Mode is set On.

EnterMoveOPTION



Select OO nn.

1MENU

3

2ENTER

ENTER

Select CCCC11-44, TTeexxtt11-44, orSSeerrvviiccee11 - 66.

4



EnterMoveOPTION

Language : English

Caption : CC1

Language : English

Caption : Off

Mode CC1

Close

Digital Option

FF On GG

SO

UN

D &

LAN

GU

AG

E C

ON

TR

OL

66


EnterMoveOPTION

Caption Option

Customize the DTV/CADTV captions that appear on your screen.

This function in only available when Caption Mode is set On.



Select OO nn.

1MENU

3

2ENTER

ENTER

Select CCuussttoomm.5

ENTER

Customize the SSttyyllee, FFoonntt, etc., to yourpreference. A preview icon is provided atthe bottom of the screen, use it to see thecaption language.

6

Select DDiiggiittaall OOppttiioonn.4

SSiizzee: Set the word size.

FFoonntt: Select a typeface for the text.

TTeexxtt CCoolloorr: Choose a color for thetext.

TTeexxtt OOppaacciittyy: Specify the opacityfor the text color.

BBgg ((BBaacckkggrroouunndd)) CCoolloorr: Select abackground color.

BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy: Selectthe opacity for the background color.



Size A Standard

Font Font 1

Text Color White

Text Opacity Solid

Bg Color Black

Bg Opacity Solid

Close

FF Custom GG

Mode CC1

Close

Digital Option

FF On GG

EnterMoveOPTION

Language : English

Caption : Off

Language : English

Caption : CC1

TIM

E S

ET

TIN

G

67

CLOCK SETTING

TIME SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal.

The digital channel signal includes information for the current time provided by the broadcasting station.

Set the clock manually if the current time is set incorrectly by the auto clock function.

Select TTIIMMEE.

Select CClloocckk.

Select AAuuttoo.

1MENU

3

2ENTER

ENTER

Select your viewing area time zone.

: EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaaccii ff iicc,AAllaasskkaa, or HHaawwaaii ii.

4

Select AAuuttoo, OO nn, or OOff ff (depending onwhether or not your viewing area observesDaylight Saving time).

5



EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Year

Month 2

Date 21

Hour 2 AM

2008

Minute 10

Time Zone Eastern

DaylightSaving Auto

Close

FF Auto GG

TIM

E S

ET

TIN

G

68

TIME SETTING

Manual Clock Setup

If the current time setting is wrong, set the clock manually.

Select TTIIMMEE.

Select CClloocckk.

Select MMaannuuaall.

1MENU

3

2ENTER

ENTER

Select the Year, Month, Date, Hour, or Minute option.4

Set the Year, Month, Date, Hour, or Minute option.5



EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

Year

Month 2

Date 21

Hour 2 AM

2008

Minute 10

Time Zone Eastern

DaylightSaving Auto

Close

FF Manual GG

TIM

E S

ET

TIN

G

69

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set.

The OOffff TTiimmee function overrides the OOnn TTiimmee function if they are both set to the same time.

The TV must be in standby mode for the OOnn TTiimmee to work.

Select TTIIMMEE.

Select OOffff TTiimmee or OOnn TTiimmee.

Select RReeppeeaatt.

1MENU

3

2ENTER

ENTER

Select OOff ff, OOnnccee, EEvveerryyddaayy, MMoonn~FFrr ii,MMoonn~SSaatt, WWeeeekkeenndd, or SSuunnddaayy.

4

Select and set HHoouurr or MMiinnuuttee.5



EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : 6:30 AM (Once)

Sleep Timer : Off

Auto Sleep : Off

Repeat FF Once GG

Hour 6 AM

Minute 30

Close

TIM

E S

ET

TIN

G

70

TIME SETTING

SLEEP TIMER SETTING

The Sleep Time turns the TV off at the preset time.

Note that this setting is cleared when the TV is turned off.

Press the TTIIMMEERR button repeatedly to select the number of minutes.

Sleep timer options: Off, 10, 20, 30, 60, 90, 120, 180, and 240 minutes.

1TIMER

2RETURN

You can also adjust SSlleeeepp TTiimmeerr in the TTIIMMEE

menu.

10min


TIM

E S

ET

TIN

G

71

AUTO SHUT-OFF SETTING

TV will be automatically turned off, in case of no signal for 10 minutes.

Select TTIIMMEE.

Select AAuuttoo SSlleeeepp.


1MENU

3

2ENTER

ENTER



EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

EnterMoveTIME

Clock : Feb/21/2008/ 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off Off

On

TV will be automatically turned off, in case of No Signal for 10 minutes.

PARENTAL CONTROL / RATINGS

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

72

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing thetype of the program and the categories. It is also possible to block all program viewing for a time period. To usethis function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categoriesRating guidelines are provided by broadcasting stations. Most television programs and television movies can beblocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.

Ratings for Television programs including made-for-TV movies : TV-G (General audience)

TV-PG (Parental guidance suggested)

TV-14 (Parents strongly cautioned)

TV-MA (Mature audience only)

TV-Y (All children)

TV-Y7 (Children 7 years older)

Set up blocking schemes to block specific channels, ratings, and external viewing sources.

A password is required to gain access to this menu.

Setting up Your Password

Close

Enter Password

* * * *

Select LLOOCCKK.1

MENU ENTER

Input the password.2 1

4 5 6

7 8

0

9

2 3

Enter the password as requested.

The TV is set up with the initial pass-word “0-0-0-0”.

SET PASSWORD & LOCK SYSTEM

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

73

Enables or disables the blocking scheme you set up previously.

Lock System

Select LLoocckk SSyysstteemm.


4

3

ENTER When you select OO nn, the Lock Systemis enable.

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3



EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Off

On

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

74

PARENTAL CONTROL /RATINGS

Change the password by inputting a new password twice.

Set Password

Select SSeett ppaasssswwoorrdd.

Choose any 4 digits for your new password.

As soon as the 4 digits are entered, re-enterthe same 4 digits on the CCoonnff ii rrmm.

4

3

ENTER1

4 5 6

7 8

0

9

2 3

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3



EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

New * * * *

Confirm * * * *

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

75

CHANNEL BLOCKING

Select BBlloocckk CChhaannnneell.

Select a channel to block or unblock.

4

3

ENTER

Block or unblock a channel.5

ENTER

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3

6MENU Return to the previous menu.

RETURN Return to TV viewing.

Block/Unblock Move PageCHMove Previous RETURN EXITMENU

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block +

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

76


MOVIE & TV RATING

Movie Rating (MPAA)Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You canset the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind thatthe movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.

Select MMoovviiee RRaattiinngg.

Select GG, PP GG, PPGG--1133, RR, NNCC--1177,XX, or BBlloocckkiinngg OOffff.

4

3

ENTER

G (General audience)

PG (Parental guidance suggested)

PG-13 (Parents strongly cautioned)

R (Restricted)

NC-17 (No one 17 and under admitted)

X (Adult only)

Blocking Off (Permits all programs)

GG If you set PG-13: G and PG movies willbe available, PG-13, R, NC-17 and X willbe blocked.

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3



EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

G

PG

PG-13

R

NC-17

X

Blocking Off

Blocking off : Permits all programs

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

77

Select TTVV RRaattiinngg--CChhii llddrreenn.

Select AAggee or FFaannttaassyy VViioolleennccee.4

3

ENTER

Select block options.

5

Age (applies to TV-Y, TV-Y7)

Fantasy Violence (applies to TV-Y7)

TV Rating Children

Prevents children from watching certain children's TV programs, according to the ratings limit set. The children

rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-

ences in the TV Rating - sub menu, your children can view those programs.

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

Age GG

Fantasy Violence

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

78

TV Rating General

Based on the ratings, blocks certain TV programs that you and your family do not want to view.

Select AAggee, DDiiaalloogguuee, LLaanngguuaaggee,SSeexx or VViioolleennccee.

4

3

ENTER

Select block options.

5

Age (applies to TV-G,TV-PG,TV-14,TV-MA).

Dialogue-sexual dialogue (applies toTV-PG,TV-14).

Language-adult language (applies toTV-PG, TV-14, TV-MA).

Sex-sexual situations (applies to TV-PG,TV-14, TV-MA).

Violence (applies to TV-PG, TV-14, TV-MA).

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3



EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

Age GG

Dialogue

Language

Sex

Violence


Select TTVV RRaattiinngg--GGeenneerraall.

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

79

DOWNLOADABLE RATING

Based on rating table, your TV's OSD(On Screen Display) may differ slightlyfrom what is shown in this manual.

This function may become available in the future and will be available only for digital channels.

This function operates only when TV has received Region5 Rating data.

Select DDoowwnnllooaaddaabbllee RRaattiinngg.

Select desired DDoowwnnllooaaddaabblleeRRaattiinngg option.

4

3

ENTER

Select desired option and block it.5

ENTER

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3



EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Humor

Sport

Cruelty

Language

Sadness

Genre

Age

Close

E

E

PAR

EN

TAL C

ON

TR

OL / R

AT

ING

80

PARENTAL CONTROL /RATINGSPARENTAL CONTROL /RATINGS

EXTERNAL INPUT BLOCKING

Enables you to block an input.

Select IInnppuutt BBlloocckk.

Select input source.4

3

Select OO nn or OOff ff.5

ENTER

Select LLOOCCKK.1

MENU ENTER


4 5 6

7 8

0

9

2 3



EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

EnterMoveLOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

AV1 FF Off GG

AV2 Off

Component Off

HDMI Off

RGB Off

Close

FF Off GG

Off

Close

AV

HDMI

For 22LG3DCH For 26/32LG3DCH

32LG3DC

AP

PE

ND

IX

81

APPENDIX

TROUBLESHOOTINGTThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..

TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

No picture &No sound

No or poor color

or poor picture

Poor reception on

some channels

Lines or streaks

in pictures

No picture

when connecting HDMI

Horizontal/vertical bars

or picture shaking

Picture appears slowly

after switching on

The remote control

doesn’t work

Power is suddenly

turned off

Check to see if there is any object between the product and the remote controlcausing obstruction. Ensure you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

Ensure that the correct remote operating mode is set: TV, VCR etc.

Install new batteries.

Is the sleep timer set?

Check the power control settings. Power interrupted.

Check whether the product is turned on.

Try another channel. The problem may be with the broadcast.

Is the power cord inserted into wall power outlet?

Check your antenna direction and/or location.

Test the wall power outlet, plug another product’s power cord into the outletwhere the product’s power cord was plugged in.

This is normal, the image is muted during the product startup process. Pleasecontact your service center, if the picture has not appeared after five minutes.

Adjust Color in menu option.

Try unplugging any others electronics that are near by to see if interference iscausing the problem.


Are the video cables installed properly?

Activate any function to restore the brightness of the picture.

Check for local interference such as an electrical appliance or power tool.

Station or cable product experiencing problems, tune to another station.

Station signal is weak, reorient antenna.

Check for sources of possible interference.

Check antenna (Change the direction of the antenna).

Check HDMI cable over version 1.3.

If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or noscreen display. In this case use the latest cables that support HDMI version 1.3.

AP

PE

ND

IX

82

APPENDIXAPPENDIX

TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))

Adjust resolution, horizontal frequency, or vertical frequency.

Check the input source.

Run the Auto configure or adjust clock, phase, or H/V position. (Option)

Check the signal cable.

Update video card drivers.

The signal is out of range

Screen color is unstableor single color

Vertical bar or stripe on

background &Horizontal Noise &Incorrect position

Picture OK but No sound

Unusual sound frominside the product

No sound when connecting HDMI

or USB

No output from one

of the speakers

TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

Press the VOL or VOLUME button.

Sound muted? Press the MUTE button.


Are the audio cables installed properly?

Adjust Balance in menu option.

A change in ambient humidity or temperature may result in an unusual noisewhen the product is turned on or off and does not indicate a fault with theproduct.

Check HDMI cable over version 1.3.

Check USB cable over version 2.0.

*This feature is not available for all models.

AP

PE

ND

IX

83

The specifications shown above may be changed without prior notice for quality improvement.

MAINTENANCEEarly malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can

enjoy your new TV.

Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarmwater and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and thenuse it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

GG If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplugthe power cord to protect against possible damage from lightning or power surges.

CAUTION

2

1

GG Do not use window/glass cleaner or anything with ammonia to clean the screen.

WARNING

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

PRODUCT SPECIFICATIONS

MODEL

NTSC-M, VSB, 64 & 256 QAM

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

75 ohm

32 ~ 104°F (0 ~ 40°C)

Less than 80%

-4 ~ 140°F (-20 ~ 60°C)

Less than 85%

Dimensions

(Width

x Height

x Depth)

Weight

Power requirement

Television System

Program Coverage

External Antenna Impedance

Environment

condition

With stand

Without stand

With stand

Without stand

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

26LG3DCH(26LG3DCH-UA)

26.1 x 17.6 x 3.1 inches

663.3 x 449.8 x 80.0 mm

18.9 pounds / 8.6 kg

AC120V ~ 50/60Hz

31.5 x 21.4 x 4.2 inches

801.8 x 544.4 x 109 mm

26.2 pounds / 11.9 kg

AC120V ~ 50/60Hz


31.5 x 23.7 x 9.1 inches

801.8 x 604.2 x 232 mm

31.5 x 21.4 x 4.2 inches

801.8 x 544.4 x 109 mm

29.5 pounds / 13.4 kg

26.2 pounds / 11.9 kg

AC100-240V ~ 50/60Hz

32LG3DC(32LG3DC-UA)


20.7 x 15.2 x 3.2 inches

528 x 387.3 x 82.7 mm

13.6 pounds / 6.2kg

AC120V ~ 50/60Hz

AP

PE

ND

IX

84

APPENDIX

Configuration of frame

1st frame

Repeat frame

Lead code

Repeat code

BBiitt ddeessccrriippttiioonn

FFrraammee iinntteerrvvaall :: TTff

The waveform is transmitted as long as a key is depressed.

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code Low custom code High custom code Data code Data code

Repeat codeTf

4.5 ms

9 ms

2.25 ms 9 ms

0.55 ms

0.56 ms

1.12 ms

0.56 ms

2.24 ms

Tf Tf

Tf=108ms @455KHz

Bit ”0” Bit ”1”

1. How to Connect

Connect your wired remote control to the Remote Control port on the TV.

2. Remote Control IR Codes

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz

T1

Tc Carrier frequency

FCAR = 1/TC = fOSC/12

Duty ratio = T1/TC = 1/3

IR CODES

AP

PE

ND

IX

85

Code Function Note(Hexa)

08 POWER Remote control Button (Power On/Off)

0F TV Remote control Button

0B INPUT Remote control Button

4D PICTURE Remote control Button

52 SOUND Remote control Button

0A SAP Remote control Button

79 RATIO Remote control Button

10-19 Number Key 0-9 Remote control Button

4C - (Dash) Remote control Button

1A FLASHBK Remote control Button

02 VOL + Remote control Button

03 VOL - Remote control Button

00 CH + Remote control Button

01 CH - Remote control Button

0E TIMER Remote control Button

39 CC Remote control Button

09 MUTE Remote control Button

CB ADJUST Remote control Button

43 MENU Remote control Button

5B RETURN Remote control Button

40 Remote control Button




44 ENTER Remote control Button

Code Function Note(Hexa)

D6 TV Discrete IR Code (TV Input Selection)

5A AV1 Discrete IR Code (AV1 Input Selection)

BF COMPONENT Discrete IR Code (COMPONENT Input Selection)

D5 RGB Discrete IR Code (RGB Input Selection)

CE HDMI1 Discrete IR Code (HDMI1 Input Selection)

76 Ratio 4:3 Discrete IR Code (Only 4:3 Mode)

77 Ratio 16:9 Discrete IR Code (Only 16:9 Mode)

AF Ratio Zoom Discrete IR Code(Only Zoom1 Mode)

C4 POWER ON Discrete IR Code (Only Power On)

C5 POWER OFF Discrete IR Code (Only Power Off)

LCD TV OWNER’S MANUAL written authorization from LG Electronics. Unauthorized modification could...

Documents

Transcript of LCD TV OWNER’S MANUAL written authorization from LG Electronics. Unauthorized modification could...