LBI Versatility (common applications) · the LBI to a wall, ceiling, or fi xture. (2x magnetic...
2
APPLICATION RECOMMENDED ACCESSORIES APPLICATION RECOMMENDED ACCESSORIES APPLICATION RECOMMENDED ACCESSORIES APPLICATION RECOMMENDED ACCESSORIES LIGHT EFFICIENT DESIGN 847.380.3540 • led-llc.com DECORATIVE PENDENT MOUNT FIXTURES Office Space CONTINUOUS RUN Warehouse Space COVE LIGHTING Hospitality COOLERS Grocery or Convenient Stores Suspended In-Line Bracket Kit Linking Cables Seamless Connectors Seamless Connectors Linking Cables 45 Degree Bracket Seamless Connectors Linking Cables Seamless Connectors OC2 Sensor LBI Versatility (common applications) INCOMING POWER KIT – One kit is required per continuous run of LBI Used to hard wire the incoming power cable into fixture or junction box. 3’ 2’ 1’ 0 – Incoming Power Cable / Pigtail – Service Disconnect & Abrasion Protection Grommet INCLUDED WITH KIT
Transcript of LBI Versatility (common applications) · the LBI to a wall, ceiling, or fi xture. (2x magnetic...
AP
PL
ICA
TIO
N
RE
CO
MM
EN
DE
D
AC
CE
SS
OR
IES
AP
PL
ICA
TIO
N
RE
CO
MM
EN
DE
D
AC
CE
SS
OR
IES
AP
PL
ICA
TIO
N
RE
CO
MM
EN
DE
D
AC
CE
SS
OR
IES
AP
PL
ICA
TIO
N
RE
CO
MM
EN
DE
D
AC
CE
SS
OR
IES
LIGHT EFFICIENT DESIGN 847.380.3540 • led-llc.com
DECORATIVE PENDENT MOUNT FIXTURES
Offi ce Space
CONTINUOUS RUN
Warehouse Space
COVE LIGHTING
Hospitality
COOLERS
Grocery or Convenient Stores
Suspended In-Line Bracket Kit
Linking Cables
Seamless Connectors
Linking CablesLinking Cables
Seamless Connectors
Linking Cables
45 Degree Bracket
Seamless Connectors
Linking Cables
Seamless Connectors
OC2 SensorOC2 SensorOC2 Sensor
LBI Versatility (common applications)
INCOMING POWER KIT– One kit is required per
continuous run of LBIUsed to hard wire the incoming power cable into fi xture or junction box.
3’2’1’0
– Incoming Power Cable / Pigtail – Service Disconnect &Abrasion Protection Grommet
INCLUDED WITH KIT
LIGHT EFFICIENT DESIGN 847.380.3540 • led-llc.com
MOUNTING ACCESSORIES
The most universal method for attaching the LBI to a wall, ceiling, or fi xture. (2x magnetic clips, 4x screws, 1x FWFC cover included with every LBI)
Fastens over the junction of 2 LBI to keep them straight in-line and provides mounting points for common suspension methods.
Use the Up/Down clip with our suspended in-line kit to clip a shorter LBI to provide up-light.
Designed for fi xtures that have thin sheet metal or plastic fi lm refl ectors commonly found on high bays.
Holds the LBI at 45 degrees to better distribute the light in the desired direction.
The fastest way to mount a light bar to a T-Bar grid ceiling. Works with standard 15/16” grid only.
SURFACE MOUNT MAGNETIC CLIP
SUSPENDED IN-LINE BRACKET KIT
UP DOWN CLIP
BLADE CLIP
45 DEGREE BRACKET/CLIP
T-BAR CLIP
DIM
NO-DIM
CONNECTORS & CONTROLS
Connect LBI together resulting in a seamless run of lighting.
Emergency solution for LBI. It allows the LBI to be used for normal and emergency operation.
Tri-Level, remote programmable high frequency motion and daylight sensor designed to easily integrate with the LBI bars.
Use the 4.7in spacer connector to bring the length of the bar system to a standard dimension.
Used when powering the LBI bars from a standard “3 prong” electrical outlet (NEMA 5-15 receptacle).NOTE electrical rating allows up to 10 LBI units connected with linking cables and/or seamless connectors when using the cord w/ plug.
SEAMLESS CONNECTORS
OC2 SENSOR KIT
EMERGENCY DRIVER (EMG-H SERIES)
4.7IN SPACER CONNECTOR
CORD WITH PLUG & ON/OFF SWITCHAVAILABLE IN 2’OR 7’
Quickly link LBI together in fi xtures, around corners and more.
LINKING CABLESAVAILABLE IN 6”, 12” OR 18”
