LAVINA 30L S (Low Profile) 30 Inch Model with Low Profile ... 25l and 30l... · New Features of...
Transcript of LAVINA 30L S (Low Profile) 30 Inch Model with Low Profile ... 25l and 30l... · New Features of...
PREP POLISH
MAINTAIN
Superabrasive, Inc9411 Jackson Trail Road, Hoschton, GA 30548
Ph (800) 987-8403 / Fax (706) 658-0357 / [email protected]
LAVINA® 30L-S (Low Profile)
Additional Features
Ideal solution for big box retail projects
Low profile base reaches beneath cabinets and shelving
3 heads and 30” of working area maximize square footage efficiency
Also available in a 25” model, with 9” heads, and without the low profile base
LAVINA® 30L-S
30 Inch Model with Low Profile BaseForced Belt-Driven Planetary
Recommended Tooling
Grinding:QuickChange toolingCalibra
Polishing:NATO®13.5 Inch V-HARR® pads
Maintenance:13.5 Inch Diama-Clean™pads
Appropriate for prep, polishing, and maintenance
Heavy-duty model: Over 520 lbs of grinding pressure (with added weights)
The LAVINA® 30L-S may also be purchased as a 25” model, without the low profile base. The L-25L-S features three standard 9 inch heads, and the same HP, voltage, attachment speeds, and grinding pressure as the 30L.
The low profile base on the 30” model reaches beneath cabinets, shelving, and accesses other hard to reach areas with larger 13.5” heads.
Horsepower 15HP / 11KW
Voltage (50-60 Hz) 3ph x 200-240V
Amperage 45 Amp
Dedicated Breaker Requirement 45 Amp
Weight of Machine 664 lbs / 301 kg
Grinding Pressure 399 lbs / 181 kg
Additional Weight up to 128 lbs / 58 kg
# of Additional Weights 2 x 64 lbs / 29 kg
Attachment Speed 300-1100 rpm
Working Width 30in / 765mm
Tool Holder Diameter 3x13.2in / 3x335mm
Tool Diameter 3x13.2in / 3x335mm
Application wet or dry
Dust-vacuum yes
Water feeding (with pump) inside/front spray
Water tank capacity 5.2gal / 20L
Cable Length 57 ft / 17.4 m
Machine Length 76in / 1930mm
Machine Width 32in / 805mm
Machine Height 47in / 1200mm
Machine Length (packaged) 46in / 1150mm
Machine Width (packaged) 29in / 730mm
Machine Height (packaged) 59in / 1500mm
Additional Model Options
Available as a 25” Model:LAVINA® 25L-S
Available as a 25” High Voltage Model:LAVINA® 25L-S-HV3phx380/480V, 30 Amp
Available as a 30” High Voltage Model:LAVINA® 30L-S-HV3phx380/480V, 32 Amp
New LAVINA® S Series!
New Features of LAVINA® S SeriesLAVINA® 25L-S, LAVINA® 30L-S
NEW! Features of LAVINA® S
1. Machines are with forced belt-driven planetary movement.
4. The base of the machine now features NEW, EXCLUSIVE U-JOINT TECHNOLOGY - an additional axis, which provides the machine with added flexibility, allowing the entire base to move and “float” in any direction over the floor.
2. New floating heads now hold QuickChange tools, allowing tools to be mounted directly to the heads, with no additional plates necessary! (Velcro heads will still be required for attaching Velcro-backed tooling.) New security plate locks also add an extra measure of safety, preventing QC tools and heads from falling or flying - a new safety feature on all S models.
3. Machines feature a completely new water spraying system, including a pump, which allows the operator to choose between internal spraying (beneath the machine) or spraying directly in front of the machine. Providing more than a mist, each sprayer provides ample water for wet grinding and polishing. The new system also includes a water filter and a light to remind operators when the pump is in the “on” position (to avoid damaging the pump).
6. Machines are equipped with an upgraded belt tensioner, a belt inspection cover, and a new belt replacing tool.
5. A new power cable attachment connects to the top of the machine near the handle, allowing the operator to easily remove the plug and cable when work is complete, for added security on job sites.
7. The light is now hardwired directly to the machine.
8. Additional features include:
- Upgraded handle
- Upgraded wheels
- Newly reinforced pulleys and cast, and larger bearings
- Upgraded belt system
- Larger, upgraded spiders for improved security
- Upgraded double seals for added protection
- Stronger, steel base plate
- The flexibility of the heads may now be customized by using either 3, 4, or 6 rubber bushings