LAUFEN IlBagnoalessI one FreestandIng BasIn 530 · LAUFEN IlBagnoalessI one FreestandIng BasIn 530...

LAUFENIlBagnoalessI one FreestandIng BasIn 530

sPeCIFICatIonrecommended use Domestic, Hotel or Commercial

Material Fine Fire Clay

Finish LAUFEN Clean Coat

Colour White

Weight 43.6kg

Capacity 5.4 litres

taphole availability 0 or 1 taphole

Integrated overflow No

Plug & waste Suits 32 x 40mm non-overflow waste

(Not included)

Fixing Bolted to the Floor using fixing set supplied.

CleanIng reCoMMendatIons

To see the complete LAUFEN range go to www.reece.com.au/bathrooms

We recommend the use of soapy water or approved cleaners.

This product should not be cleaned with abrasive materials.

Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.

Dimensions are nominal measurements only.

The above dimensions are in millimetres.

page 1 of 8

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.

Tech Page Version 2

185

900

135

530

530

>~30

0


Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference

sPare Parts

Parts list supplied by LAUFEN

900 mm265 mm

530 mm

530 mm

min. 300 mm

50 mm

120 mm

215 mm

207mm

40

15mm

15mm

15mm

15mm

15mm

mm

~270 mm

8.9818.4Pop Up Waste not included

not included

8.1197.2

8.9406.5

8.9280.6

8.7097.18.9461.1

Art. Nr. 8.1197.2

Preparation

EN 2

Parts list supplied by LAUFEN

900 mm

265 mm

530 mm

530 mm

min. 300 mm

50 mm

120 mm

215 mm

½ in½ in

207mm

40 mm

~270 mm

Ø 320 mm

185 mm

8.9818.4

1/2 in 1/2 in

1/2 in 1/2 in

not included

8.1197.2

8.9406.5

8.9280.6

8.7097.18.9461.1

Art. Nr. 8.1197.2

Preparation

EN 2

page 2 of 8page 2 of 8


Art. Nr. 8.1197.2

Assembly procedure

35 mm a

c

b

10 mm a

b

< 10 mm

50 mm

Ø 15 mm

Fastening material

For 1 Tap Hole version

EN 3

21

5 6

3

4

87

InstallatIon InstrUCtIons

note:For no taphole version where wall mount tapware is used, consideration to be made to heightpositions and length of outlet.



Fig. 2: Parts required between waterless trap and 40mm PVC DWV in floor.

Fig. 1: Basin with waterless trap (provided) connection to 40mm trap adaptor (provided) through access cavity.

Fig. 3: Access under basin showing connection of flexible waste hose (provided) to 40mm PVC DWV in floor

40mm DWV PVC (not provided) to be cut and fitted by plumber

40mm pipe joiner

Please note: modified waste set up to suit Australian plumbing requirements



9

a

b

b

b a

b

Use components as required by local plumbing regulator

Art. Nr. 8.1197.2

Assembly procedure

EN 4

10 11 12

15mm15mm


10

1

a

b

(1/2 in) (1/2 in)

Use components as required by local plumbing regulator

Art. Nr. 8.1197.2

Assembly procedure

Fig: 1: Basin with waterless trap (provided) connection to 40 mm trap adaptor (provided)through access cavity

40mm pipe joiner

Fig: 2: Parts required between waterless trap and 40 mm PVC DWV in floor

40mm DWV PVC (not provided) to be cutand fitted by plumber

Fig. 3: Access under basin showing connectionof flexible waste hose (provided)to 40 mm PVC DWV in floor

Please note: modified waste set up to suit Australian plumbing requirements

LAUFEN IL BAGNO ALESSI ONE FREESTANDING BASIN 530

EN 4

11 12 13



a

a

bb

< 10 mm 10 mm

20a19

16

30 s

1514

Art. Nr. 8.1197.2

Assembly procedure

EN 5

17 18

13

15mm

15mm

15mm

15mm




max. 5 Nm

20b

Art. Nr. 8.1197.2

Assembly procedure

b

a

22

2523

26

21

24

27

EN 6




Assembly procedure

a

b

a

b

28 29

Art. Nr. 8.1197.2

Maintenance instructions

The surface is simple to clean and care for. The smooth surface hardly accumulates any dirt. Use soft cloth, soapy solution and water for regular care. Wipe with a dry cloth. Avoid the use of abrasives or solvents, which damage the surface. Damage caused by inappropriate treatment by the user, is not covered by our guarantee.

Stripping down

EN 7

30

SILI

CONE



LAUFEN IlBagnoalessI one FreestandIng BasIn 530 · LAUFEN IlBagnoalessI one FreestandIng BasIn 530...

Documents

Transcript of LAUFEN IlBagnoalessI one FreestandIng BasIn 530 · LAUFEN IlBagnoalessI one FreestandIng BasIn 530...