Landslide 01 Installation

5/20/2018 Landslide 01 Installation

1/14PROPRIETARY AND CONFIDENTIALMarch 2011

Rev 1

Installing the Software


2/142 PROPRIETARY AND CONFIDENTIAL

Accessing the Equipment

BRAND NEW SYSTEM: Connect to LS via Monitor and Keyboard. For 7100s: Remove the face plate

to find the USB (mouse connector) and monitor connection.

Upon start-up a new unit should prompt you for IP address information. If itdoes not type in ipcfg. This will start the script to IP the unit.

Do this for both the TAS Manager and the Test Servers. These are all Dellservers the TAS manage will have no NIC cards.



Install the Landslide Setup FilesFactory Configuration System Installation

Step Action1. Login to the system with the username root. The password for the root user is spirent.

2. Insert the Landslide Software DVD into the DVDROM drive.

3. Create a temporary mount point for the DVDROM drive

##> mkdir /dvdrom

4. Mount the DVDROM drive to the newly created directory.

##> mount t auto /dev/sr0 /dvdrom

5. Create a temporary install directory.##> mkdir /root/tmpinstall

6. Switch to the temporary install directory.##> cd /root/tmpinstall

7. Copy the Landslide installation file from the DVD to the temporary install directory.

##> cp /dvdrom/ .

Note: Make sure to include the period at the end of the command.

8. Extract the install file into the install directory.

##> tar zxvf Tip: Once you type tar zxvf you should be able to press the Tab key and have the Landslide install filename automatically

complete.

9. Unmount the DVDROM drive.

##> umount /dev/sr0

10. Delete the temporary mount directory.

##> rmdir /dvdrom

11. Remove DVD from DVDROM drive.

Proceed to section 4.2 to configure as a TAS.



Install the Landslide Setup FilesLandslide TAS Configuration Procedure

Step Action

1. Run the install script

##> ./u64Install.sh tas

The Landslide install will take a few minutes, as users, Java, MySql, Apache, TAS, TS,

Test Suite and other items are installed and/or configured.

Expect to see the following near the end of the output

------------------------------------------------

Summary: A TAS is installed and enabled

------------------------------------------------

NOTE: This procedure may result in some mv errors and java exception errors.

These errors can be ignored, trust the Summary line for results.

2. Remove all of the temporary files

##> cd ..

##> rm fr tmpinstall

3. Reboot

##> reboot

4. Login to the system with the username cfguser. The password for the root user is

cfguser.

5. Run ipcfg and follow prompts to configure the TAS Manager specific parameters.

##> ipcfg



Install the Landslide Setup FilesLandslide TS Configuration Procedure

Step Action

1. Run the install script

##> ./u64Install.sh ts

The Landslide install will take a few minutes, as users, Java, MySql, Apache, TAS, TS, Test Suite

and other items are installed and/or configured.

Expect to see the following near the end of the output

------------------------------------------------

Summary: A TS is installed and enabled

------------------------------------------------

NOTE: This procedure may result in some mv errors and java exception errors. These errors can

be ignored, trust the Summary line for results.

2. Remove all of the temporary files

##> cd ..

##> rm fr tmpinstall

3. If you are installing Landslide software on a system with ATM cards, you will need to install the

atm configuration files.##> cd /home/spcoast/bin

##> ./atmcfg

Note: The atmcfg command takes several minutes to complete.

4. Reboot

##> reboot

5. Login to the system with the username cfguser. The password for the root user is cfguser.

6. Run ipcfg and setup the Test Server specific parameters.

##> ipcfg



Configuration Information Required

TAS: IP Address [192.168.0.100]:

Network Mask [255.255.255.0]:

Auto Negotiate? (yes/no) [yes]:

IP Gateway [192.168.0.254]:

Host Name [Coast49]:

NTP Server IP [192.168.0.100]:

TS: IP Address [192.168.0.100]:

Network Mask [255.255.255.0]: Auto Negotiate? (yes/no) [yes]:

IP Gateway [192.168.0.254]:

Host Name [Coast49]:

TAS IP Address

NTP Server IP [192.168.0.100]:



Browser Access

TAS and the TS Servers are now accessible You can login to the GUI by typing in the TAS manager address

into a web browser and lauch the Java GUI client:

Login defaults:

User = smsPassword = a1b2c3d4


8/14

8 PROPRIETARY AND CONFIDENTIAL

Linking TAS and TS

Adding TS to TAS manager: Go to TS and add the IP addresses ofthe new Test Servers


9/14


Adding IP Addresses to a Test Server

Click on Configure to configure the NIC ports for the new TestServer.

Password = cfguser


10/14


Configure IP addresses on TS

IP = Ip Networkaddress

Mask= Network Mask

Pool IP = First IPaddress within thisNetwork that isavailable to use on thisTest Server

# of IPs = # of IPs

within that networkthat you want to makeavailable to this TestServer


11/14

11 PROPRIETARY AND CONFIDENTIAL11

TAS System Upgrade

Access TAS Manager

The TAS Manager upgrade processtakes you through several steps:

Stopping the TAS

Backing up the system database(optional but highly recommended)

Uploading and installing the newsoftware

Restarting the TAS Manager

Installing License

Starting the TAS(or rebooting the platform)


12/14


TS System Upgrade

The TS upgrade file has .ste extension Click on Upgrade in the TS Administration Window.

Select the .tsu file and click Upgrade

Password = cfguser


13/14

13 PROPRIETARY AND CONFIDENTIAL Spirent Landslide13

Install New License License

Access TAS Manager

Stop TAS

Customer Service will provide alicense file *.sql. Save it to your PCand browse to it when prompted

Choose .sql file and click install Start TAS


14/14


Quizz

1. What items do you need to install the software in eitherTAS or TS?

2. Which is the naming convention used by default for themanagement port?

3. What is the Pool IP value?4. How do you link TAS and TS?

Landslide 01 Installation

Documents

Transcript of Landslide 01 Installation