LACT PERFORMANCE · PDF file · 2017-11-15LACT PERFORMANCE PRODUCTS DURABLE &...
1
LACT PERFORMANCE PRODUCTS DURABLE & RELIABLE SOLUTIONS DURABLE & RELIABLE SOLUTIONS FEATURES & BENEFITS: Hardened Internal Parts ● Heat treated shaft and spur gear type gears extend pressure capability and increase service life of the pump, while minimizing wear ● Internal parts heat treated for hardness to extend the life of the pump and create a hardened barrier on wear points Back Pull-Out Mechanical Seal ● Multiple sealing options, accessible via shaft end for ease of maintenance; standard Viking units with spacer coupling allow seal change without moving pump or motor No Ball or Roller Element Bearings ● Heavy duty bushings to support shaft on either side of the gears to eliminate ‘overhung load’ and durable in non-lubrication applications with no outboard bearings to service SAE Ports for Modularity ● Designed with modularity in mind, the Viking Booster pump uses SAE J518 Code 61 ports to allow flexibility in porting options with bolt on ANSI flanges to meet the customer requirements Compact Complete Unit Footprint ● Complete unit length is 5’-7’ long max (Motor speed operation means no gearbox or reducer required) ● Small, rigid formed steel base package complete with spacer coupling and guards (C1D2 & VFD rated motors as standard) BACK PULL OUT SEAL BUSHINGS SAE 4-BOLT PORTS BRACKET DRIVER GEAR HEAD GEAR CASINGS MOUNTING BRACKET DRIVER SHAFT DRIVEN GEAR PERFORMANCE: LACT Booster Pumps Ports* Nominal Flow @ No Pressure (1,750 rpm) Nominal Flow @ 750PSI (1,750 rpm) on 4 cPs Viscosity Maximum Continuous Pressure (1,750 rpm) on 4 cPs Viscosity Maximum Recommended Temperature Approximate Shipping Weight (Pump Only) Ductile Iron Inch GPM GPM BPD PSI Deg. F Lbs. GP-41013 2" SAE 25 20 690 1500 350 61 GP-41026 2" SAE 50 40 1380 1500 350 85 GP-41415 2" SAE 55 45 1550 1500 350 163 GP-41420 2" SAE 70 55 1900 750 350 171 GP-41430 2" SAE 110 85 2930 1500 350 272 GP-41440 3" SAE 140 115 3965 750 350 284 GP-41445 3" SAE 170 140 4825 1500 350 395 GP-41455 3" SAE 195 160 5520 750 350 403 GP-41460 4" SAE 210 175 6035 700 350 448 * 2” and 3” SAE ports use J518 Code 61 SAE flange ports. 4” SAE port uses 3000 Series square flange. CONTACT THE VIKING PUMP OIL & LACT PUMP SPECIALISTS: Ben Leonard: [email protected] (618) 416-5830 Office | (618) 340-3062 Mobile Doug Carlisle: [email protected] (720) 920-9627 Office | (303) 475-6997 Mobile © Copyright 2017 Viking Pump, Inc. All Rights Reserved. Rev1017 | Form No. 441_Booster
Transcript of LACT PERFORMANCE · PDF file · 2017-11-15LACT PERFORMANCE PRODUCTS DURABLE &...
LACT PERFORMANCE PRODUCTSDURABLE & RELIABLE SOLUTIONSDURABLE & RELIABLE SOLUTIONS
FEATURES & BENEFITS:
Hardened Internal Parts ● Heat treated shaft and spur gear type gears
extend pressure capability and increase service life of the pump, while minimizing wear
● Internal parts heat treated for hardness to extend the life of the pump and create a hardened barrier on wear points
Back Pull-Out Mechanical Seal ● Multiple sealing options, accessible via shaft end for ease
of maintenance; standard Viking units with spacer coupling allow seal change without moving pump or motor
No Ball or Roller Element Bearings ● Heavy duty bushings to support shaft on either side of the gears
to eliminate ‘overhung load’ and durable in non-lubrication applications with no outboard bearings to service
SAE Ports for Modularity ● Designed with modularity in mind, the Viking Booster pump uses SAE J518 Code 61 ports
to allow flexibility in porting options with bolt on ANSI flanges to meet the customer requirements
Compact Complete Unit Footprint ● Complete unit length is 5’-7’ long max (Motor speed operation means no gearbox or reducer required)
● Small, rigid formed steel base package complete with spacer coupling and guards (C1D2 & VFD rated motors as standard)
BACK PULL OUT SEAL
BUSHINGS
SAE 4-BOLT PORTS
BRACKET
DRIVER GEAR
HEAD
GEAR CASINGS MOUNTING
BRACKET
DRIVER SHAFT
DRIVEN GEAR
PERFORMANCE:LACT Booster
Pumps Ports* Nominal Flow @ No Pressure (1,750 rpm)
Nominal Flow @ 750PSI (1,750 rpm) on 4 cPs Viscosity
Maximum Continuous Pressure (1,750 rpm) on 4 cPs Viscosity
Maximum Recommended Temperature
Approximate Shipping Weight (Pump Only)
Ductile Iron Inch GPM GPM BPD PSI Deg. F Lbs.GP-41013 2" SAE 25 20 690 1500 350 61GP-41026 2" SAE 50 40 1380 1500 350 85GP-41415 2" SAE 55 45 1550 1500 350 163GP-41420 2" SAE 70 55 1900 750 350 171GP-41430 2" SAE 110 85 2930 1500 350 272GP-41440 3" SAE 140 115 3965 750 350 284GP-41445 3" SAE 170 140 4825 1500 350 395GP-41455 3" SAE 195 160 5520 750 350 403GP-41460 4" SAE 210 175 6035 700 350 448
* 2” and 3” SAE ports use J518 Code 61 SAE flange ports. 4” SAE port uses 3000 Series square flange.
CONTACT THE VIKING PUMP OIL & LACT PUMP SPECIALISTS:
Ben Leonard: [email protected] (618) 416-5830 Office | (618) 340-3062 Mobile
Doug Carlisle: [email protected] (720) 920-9627 Office | (303) 475-6997 Mobile
© Copyright 2017 Viking Pump, Inc. All Rights Reserved. Rev1017 | Form No. 441_Booster
