LABORTOPS - Th. Geyer - Lab · 2020. 12. 14. · Fast filtering, particle retention 12-15 µm,...
Transcript of LABORTOPS - Th. Geyer - Lab · 2020. 12. 14. · Fast filtering, particle retention 12-15 µm,...
LABORTOPS
VALID UNTIL 31/03/2021
SPECIAL PRICECHEMSOLUTE® & LABSOLUTE®
KJELDAHL ASSORTMENT
SEE PAGE 26
Laboratory equipment
Shaking and mixing
Temperature control
Plasticware
Glassware
Sampling
Chromatography
pH and conductivity measurement
Filtration
Cell sulture
Life science
Liquid handling
Transport and packing
Occupational safety
Tempature measurement
Time measurement
Kjeldahl / Soxhlet
Weighing
Tube racks
Centrifuging
Mixing and stirring
Disinfectant
16
17 – 18
19
20 – 21
22
23
24
25
26
27
28
29
30 – 31
32
2
3 – 4
5 – 7
8
9
10 – 11
12
13 – 15
2
LABORATORY EQUIPMENT
PRESSURE ATOMIZER LABOPLAST®
,
HDPE
The pressure sprayer is ideal to
spray a wide range of liquids
uniformly. The pressurised spray
has a working pressure of 4 bar.
- Wetted parts PE, PP, glass-fibre
reinforced PA, V2A, FKM
- Bottle made of HDPE
- With short spray nozzle
- Left-handed and right-handed
pistol control
- Adjustable spray jet
- Graduation up to 1500 ml
- Temperature max. 30 °C
Capacity Ext.
diam.
Neck
diam.
Height PK Cat. No.
ml mm mm mm
1500 142 45 315 1 9.223 162
LLG-PRESSURE-SEAL BAGS
WITH WRITE ON PATCH, PE
Transparent. PE. With rim channel
seal that can be opened and closed
repeatedly, and write-on patch.
Width Length Thickness PK Cat. No.
mm mm mm
40
70
80
100
120
160
200
60
100
120
150
170
220
300
0.05
0.05
0.05
0.05
0.05
0.05
0.05
1000
1000
1000
1000
1000
1000
1000
6.314 360
6.314 361
6.314 362
6.314 357
6.314 358
6.314 359
6.314 363
PERMANENT MARKERS,
EDDING 400/3000
Low-odour, smudge-proof, water-resistant, quick drying, lightfast,
refillable. Replaceable tips. For labelling on almost all surfaces,
including glass, metal and plastics.
Alcohol-based ink without toluene/xylene.
Type Colour Line
width
PK Cat. No.
mm
400
3000
Black
Black
1.0
1.5 ... 3.0
10
10
4.667 505
4.667 506
L A B W A R E
®
LABORATORY MAT, SILICONE
The Labsolute®
laboratory mat is the ideal protection of surfaces from
liquids, heat and wear. The mat is made of food-grade, flexible silicone
with a raised lip around the edge.
- Reversible with blue and white site
- Integrated metal strip prevents the rolling of magnetic stirring bars
- Raised lip holds back up to 300 ml of liquid
- Autoclavable at 121 °C for 15 min
- Protects surfaces from hot objects up to 200 °C
- Anti-skid and noise dampening
- Reusable and environmentally friendly
- Compact storage by rolling up the mat
Width Depth Height PK Cat. No.
cm mm mm
35 60 0.2 1 7.696 377
BENCH PROTECTION PAPER
The double-layered surface protector from LABSOLUTE®
is ideally suited
to protect all working surfaces from chemicals and radioactive, corrosive
and toxic substances. The upper layer is made of 100 % cellulose which
is highly absorbent. The bottom layer made of PE provides high tear
resistance and prevents liquids leaking through in order to protect work
surfaces from contamination.
- Dimensions (W x D): 460 x 570 mm
- Thickness: 0.24 mm
- Weight: 125 g/m²
- Absorption: 170 g/m²
Type PK Cat. No.
Sheets 100 7.697 920
Th. Geyer - A family business since 1892 and the partner for your laboratory
3
SHAKING AND MIXING
ROLLER MIXERS LLG-uniROLLER 6 easy AND pro
Type Plug type PK Cat. No.
LLG-uniROLLER 6 easy
LLG-uniROLLER 6 easy
LLG-uniROLLER 6 pro
LLG-uniROLLER 6 pro
EU
UK
EU
UK
1
1
1
1
6.263 645
6.263 646
6.263 647
6.263 648
easy
pro
L A B W A R E
®
Analog or digital tube rollers with 6 rolls
for the efficient mixing of biological
samples, viscous substances and liquid-
solid suspensions. Used in a variety of
applications, such as the prevention of
blood coagulation, immune
precipitation.
- Max speed 70 rpm
- For gentle rolling of samples
- Easy to clean
LLG-uniROLLER 6 easy:
- Analogue control
- Easy to use
LLG-uniROLLER 6 pro:
- LCD display
- Continuous or timer operation
THERMOMIXER®
C WITH SMARTBLOCKTM
The Eppendorf ThermoMixer®
C combines unique mixing performance
with excellent temperature control to guarantee test results which are
complete, dependable and reproducible.
- Mixing, heating and cooling in all common vessel and plate formats in the volume range from 5 μl to 50 ml
- Excellent 2D
Mix-Control technology results in excellent sample mixing
- Highest flexibility through the choice of 13 different
Eppendorf SmartBlock™ variants
- Eppendorf QuickRelease™ technology enables fast and simple block exchange – no need for tools
- Anti-spill technology prevents lid wetting and cross-contamination
- Increased mixing frequency of up to 3,000 rpm for effective
sample mixing
- Compatible with Eppendorf ThermoTop®
(condens.protect®
)
for condensation-free sample handling (for Eppendorf SmartBlocks up to 2.0 ml)
Temperatur range:
Minimum: 15 °C ±2 °C below ambient temperature
Maximum: +100 °C
Temperature adjustment: 1-100 °C, adjustable in steps of 1 °C
Description PK Cat. No.
ThermoMixer®
C*.
SmartBlock™ 0.5 ml for 24 reaction vessels
SmartBlock™ 1.5 ml for 24 reaction vessels
SmartBlock™ 2.0 ml for 24 reaction vessels
1
1
1
1
9.776 902
9.776 906
9.776 907
9.776 908
*For each order of a ThermoMixer®
C you will receive a SmartBlock of your choice from the above list free of charge.
Further SmartBlockTM
versions can be found in the Th. Geyer Webshop
Example with
SmartBlock™ 1.5 ml
Now with a SmartBlockTM
free of charge
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
Specifications easy // pro
Type of movement: rocking and rolling
Amplitude: 24 mm
Speed: 0 ... 70 rpm
Timer: - // 1 ... 1199 min
Load max.: 4 kg
Ambient temperature: 5 ... 40 °C
Max. humidity: 80 % RH
Dimensions (W x D x H): 260 x 450 x 120 mm
Weight: 4.5 kg // 5.1 kg
Power consumption: 25 W // 30 W
Power supply: 100 ... 240 V,
50/60 Hz
IP code: IP 21
4
SHAKING AND MIXING
MIXERS MICROTRON®
MB 550
MICROTRON®
MB 550 is specially designed for mixing, dispersing,
homogenizing, emulsifying and size reduction of cuttable materials.
Four different attachments made from glass with volumes of 125 ml,
250 ml, 500 ml and 1000 ml are available. Grounded, double safety
isolated, radio screened. A safety system prevents uncontrolled starting
and therewith personal injuries: the mixer can only be started with well
attached safety hood or lid. In case the hood or lid will be removed
during operation the device will be stopped automatically.
Mixing jars and protective hoods - please order separately.
Mixer MICROTRON®
MB 550 can only be started with attached
safety hood.
Specifications
Motor input power: 550 W
Speed range: Stepless, 1000 ... 15.000 rpm
Dimensions (Ø x H): 190 x 245 mm
Type Max. Feed quantity/
Flow rate
PK Cat. No.
ml
MB 550 1000 1 6.241 879
ACCESSORIES FOR MIXER
MICROTRON®
MB 550
The mixing attachments MBA 125 to 1000 ml made of glass can be
dismantled completely and easily.
Type Description Volume Material PK Cat. No.
ml
MBA 125
MBA 250
MBA 500
MBA 1000
MBH 125
MBH 250
MBH 500
MBH 1000
Mixing attachment
Mixing attachment
Mixing attachment
Mixing attachment
Safety hood
Safety hood
Safety hood
Safety hood
125
250
500
1000
-
-
-
-
Glass
Glass
Glass
Glass
Acrylic glass
Acrylic glass
Acrylic glass
Acrylic glass
1
1
1
1
1
1
1
1
6.257 342
6.260 922
6.241 880
6.260 923
6.257 343
6.260 925
6.241 881
6.260 926
MBA 1000
MBH 1000
VORTEX-GENIE®
2
Robust and reliable shakers for speedy mixing and shaking of samples.
Multiple accessories: e.g. adapter tops for test tubes, beakers,
centrifuge tubes. Adapter tops can be changed easily with the snap fit
system.
Variable speed for precise mixing from gentle to vigorous. Broad range
of attachments for most tubes, plates and other containers. Hands-Free
or Touch On control.
Scope of supply: Vortexer, 76 mm Platform with rubber cover,
Pop-off cup
Specifications
Shaking movement: orbital
Speed display/Timer: Scale
Speed range: 600 ... 2700 rpm
Dimensions (L x W x H): 165 x 122 x 165 mm
Permissible ambient conditions: 0 ... 38 °C at 95 % RH
Weight: 4 kg
Power supply: 230 V, 50/60 Hz
Type Plug type PK Cat. No.
Vortex Genie®
2
Vortex Genie®
2
Vortex Genie®
2
EU
UK
CH
1
1
1
9.730 060
6.251 939
6.235 684
Robust and Reliable
Th. Geyer - A family business since 1892 and the partner for your laboratory
5
FILTER PAPERS
QUALITATIVE FILTER PAPERS
The qualitative filter papers are
manufactured from pure
cellulose with a proportion of
alpha-cellulose of almost
100 %. The ash content is
about 0.06 %.
CIRLCES
GRADE 2005
Fast filtering, particle retention 12-15 µm, filtration speed 10 s
according to DIN 53137, basis weight 84 g/m², thickness 0.20 mm
For large-volume or gel-like deposits (e.g. hydroxides of iron and
copper or sulphides of iron and cobalt).
Ø PK Cat. No.
mm
42.5
55
70
90
110
125
150
185
210
240
100
100
100
100
100
100
100
100
100
100
7.697 990
7.697 991
7.697 992
7.697 993
7.697 994
7.697 995
7.697 996
7.697 997
7.697 998
7.697 999
CIRCLES,
GRADE 2020
Medium to slow filtering, particle retention 5-13 µm, filtration speed
88 s according to DIN 53137, basis weight 73 g/m², thickness 0.16 mm
For fast filtration with fine particles for general, electrolytic application
in schools, research, health care, food and cosmetics industry.
Ø PK Cat. No.
mm
42.5
55
70
90
110
125
150
185
240
100
100
100
100
100
100
100
100
100
7.697 970
7.697 971
7.697 972
7.697 973
7.697 974
7.697 975
7.697 976
7.697 977
7.697 979
QUANTITATIVE FILTER PAPERS,
ASHLESS
The filter papers for quantitative
analyses are made of 100 % cotton
linters. For maximum purity the
papers are acid-washed and
cleaned with demineralized water.
Ash content is 0.007 %.
CIRCLES, BLACK RIBBON EQUIVALENT,
GRADE 1005
Fast filtering, particle retention 12-15 µm, filtration speed 10 s
according to DIN 53137, basis weight 84 g/m², thickness 0.18 mm
For coarse, voluminous precipitates (e.g. iron, aluminium and chrome
hydroxide).
Ø PK Cat. No.
mm
42.5
55
70
90
110
125
150
185
210
240
100
100
100
100
100
100
100
100
100
100
7.697 827
7.697 828
7.697 820
7.697 821
7.697 822
7.697 823
7.697 824
7.697 825
7.699 050
7.697 826
CIRCLES, RED RIBBON EQUIVALENT,
GRADE 1015
Medium to slow filtering, particle retention 5-8 µm, filtration speed 50 s
according to DIN 53137, basis weight 84 g/m², thickness 0.16 mm
For fine precipitates (magnesium phosphate, ammonium phosphate,
calcium oxalate, coarser flaked forms of barium sulphate).
Ø PK Cat. No.
mm
42.5
55
70
90
110
125
150
185
240
100
100
100
100
100
100
100
100
100
7.697 818
7.697 810
7.697 811
7.697 812
7.697 813
7.697 814
7.697 815
7.697 816
7.697 817
FILTER FLASKS, WITH GLASS OLIVE,
BOROSILICATE GLASS 3.3
Erlenmeyer shape. With glass olive.
Borosilicate glass 3.3. ISO 6556 and
DIN 12476. Autoclavable. Vacuum-proof.
Due to the glass olive the flasks do not
comply with the requirements of the
equipment and product safety law.
Capacity Neck
Ø
Height PK Cat. No.
ml mm mm
100
250
500
1000
2000
17
28
34
37
41
107
158
188
242
288
1
1
1
1
1
7.690 200
7.690 201
7.690 202
7.690 203
7.690 204
BUCHNER FUNNELS, PORCELAIN
Glazed on the inside and outside.
Comply with DIN 12905. Excellent
resistance to acids and lyes with the
exception of hydrofluoric acid.
Int.
Ø
Filter
Ø
PK Cat. No.
mm mm
48
62
77
97
116
130
156
45
55
70
90
110
125
150
1
1
1
1
1
1
1
7.694 954
7.694 955
7.694 956
7.694 957
7.694 958
7.694 959
7.694 960
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
6
TEMPERATURE CONTROL
CIRCULATOR BATHS, CORIOTM
CD
CORIO CD Heating Circulators for internal and external temperature
applications with stainless steel baths for working temperatures from +20 °C
to +150 °C. CORIO Heating Circulators feature professional technology for
demanding applications. These units facilitate internal temperature control in
the bath tank or control of externally connected applications.
- For internal and external applications
- Bright, white, easy to read display
- Very quiet
- Pump change-over between internal and external circulation
- USB connection
- High-quality bath tanks made of stainless steel with bath lid and drain tap
- Integrated cooling coil for counter-cooling
Working temperature range: +20 +150 °C
Temperature stability: ±0.03 °C
Heating capacity: 2 kW
Flow rate: 15 l/min
Pressure: 0.35 bar
Type Filling
volume
Dimensions
(W x D x H)
Bath
opening
Bath tank
depth
PK Cat. No.
L mm mm mm
CORIOTM
CD-BC4
CORIOTM
CD-BC6
CORIOTM
CD-BC12
CORIOTM
CD-BC26
3 - 4.5
4.5 - 6
8.5 - 12
19 - 26
230 x 410 x 420
240 x 440 x 470
330 x 490 x 470
390 x 620 x 480
130 x 150
130 x 150
220 x 150
260 x 350
150
200
200
200
1
1
1
1
4.658 004
4.658 005
4.658 006
4.658 007
For Internal and External Applications
Especially Quiet
Up to 150 °C
WATER BATHS HYDRO
Type Capacity
of the bath
Internal
dimensions
(W x D x H)
External
dimensions
(W x D x H)
Plug type PK Cat. No.
litres mm mm
H 4
H 8
H 16
H 22
H 24
H 41
4
8
16
22
24
41
245 x 100 x 165
245 x 200 x 165
400 x 245 x 165
400 x 245 x 225
600 x 245 x 165
410 x 296 x 335
340 x 290 x 275
340 x 395 x 275
500 x 440 x 275
500 x 440 x 345
700 x 440 x 275
510 x 490 x 476
EU
EU
EU
EU
EU
EU
1
1
1
1
1
1
4.672 291
4.672 292
4.672 293
4.672 294
4.672 295
4.672 296
Proven GFL Technology
Bath volumes from 4 to 41 litres
The Hydro water baths are optimally equipped for every application in the
laboratory. With their precise temperature distribution, they are designed
for the needs of biological, medical or biochemical laboratories.
The H 8 A and H 16 A models are also equipped with a circulation system
for optional mixing.
- Interior made of high quality stainless steel
- Applications in the boiling range possible (temperature range: 25 to 100 °C)
- TFT color display for intuitive operation, temperature display in °C and °F
- Temperature stability ±0.1 °C
- Programmable timer
- Optical and acoustic alarm in the event of an error
Th. Geyer - A family business since 1892 and the partner for your laboratory
7
TEMPERATURE CONTROL
DESICCATOR STAR, PMMA
Includes four transparent acrylic shelves,
tray, hygrometer and desiccant, with
positions for up to 26 shelves and
stackable.
Specifications
Panels: clear
Material: PMMA
Temperature resistance: -20 ... 70 °C
Maximum all-over load per shelf: 10 kg
Total all-over load: 30 kg
Volume External
dimensions
(W x D x H)
Weight PK Cat. No.
litres mm kg
42 310 x 375 x 525 7 1 9.042 651
DESICCATOR STAR-VITRIUM,
BOROSILICATE GLASS 3.3
Panels made of borosilicate glass 3.3,
including four shelves made of stainless
steel, tray, hygrometer and desiccant,
usable with up to 26 shelves,
stackable.
Specifications
Panels: clear
Material: Borosilicate glass 3.3/
stainless steel
Temperature resistance: -70 ... 150 °C
Maximum all-over load per shelf: 10 kg
Total all-over load: 30 kg
Volume External
dimensions
(W x D x H)
Weight PK Cat. No.
litres mm kg
51 310 x 375 x 525 14 1 9.042 006
LLG-DESICCATORS,
SODA-LIME GLASS, WITH LID,
STOPCOCK AND PORCELAIN PLATE
The stopcock has an outer diameter of about 9 mm.
Not suitable for vacuum-tight applications.
Ext.
diam.
Plate
diam.
Height PK Cat. No.
mm mm mm
215
262
293
380
140
190
235
280
224
239
278
414
1
1
1
1
9.042 740
9.042 741
9.042 742
9.042 743
DESICCATOR NALGENETM
,
TYPE 5311, PC
Transparent, lightweight, unbreakable, for vacuum or non-vacuum use.
With stopcock. Large, stable base. No danger of implosion. Capable of
maintaining 0.95 bar negative pressure over a 24 hour period. With
silicone O-ring, no lubrication required. Suitable for 230 mm diameter
desiccator discs or plates. Max. height over plate 195 mm.
Plate not included.
External diameter: 280 mm
Internal diameter: 251 mm
Type PK Cat. No.
5311 1 9.042 690
L A B W A R E
®
DESICCANT (SILICA GEL)
CHEMSOLUTE®
silica gel is available as granules and in pearl shape. It contains a moisture indicator which discolours
the silica gel from amber brown (full water absorption capacity) to aquamarine green (exhausted water absorption
capacity) when water is absorbed. Packed in plastic bottles / buckets.
- Grain size 2.5 to 6 mm (granules), 3 to 5 mm (pearls)
- Cobalt-free moisture indicator
- Can be regenerated at 120 °C
Form Quantity PK Cat. No.
kg
Granules (2.5 - 6 mm)
Granules (2.5 - 6 mm)
Granules (2.5 - 6 mm)
Pearls (3 - 5 mm)
1
5
25
1
1
1
1
1
1616.1000
1616.5000
1616.9025
1626.1000
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
8
PLASTICWARE
SPACE SAVING JERRYCAN
FLACHMANN LABOPLAST®
, PP
Transparent. With its low width the compact jerrycan Flachmann is ideal
as a space-saving canister. Different liquids can be stored and decanted
in a small space. Flachmann can also be stored lying on its side e.g. in a
refrigerator. It is very stable due to ribbed structure and thick sides.
The compact jerrycan can also be used as a settling canister. With the
optional support stands for 5 l jerrycans, they can be placed safely in
the open.
- With or without threaded connector 3/4"
- With tamper-evident cap, PP, blue
- Canister without valve autoclavable
- Graduations: 250ml
- With moulded, indestructible litre graduation
Space-saving Compact set: 1 Flachmann LaboPlast®
canister
5 or 10 L and 1 stopcock Compact
Space-saving StopCock set: 1 Flachmann LaboPlast®
canister
5 or 10 L with screw neck and 1 stopcock
Capacity Description Dimensions
(W x D x H)
PK Cat. No.
l mm
5
5
5
5
10
10
with screw neck,
without screw neck
Space-saving Set Compact
Space-saving Set StopCock
Space-saving Set Compact
Space-saving Set StopCock
Support stand for 2 jerrycans
(only for 5 l canister)
Support stand for 3 jerrycans
(only for 5 l canister)
65 x 335 x 335
65 x 335 x 335
65 x 335 x 335
65 x 335 x 335
125 x 335 x 335
125 x 335 x 335
1
1
1
1
1
1
1
1
9.140 002
9.140 001
9.140 004
9.140 011
6.290 255
6.290 254
9.139 999
9.139 996
LABORATORY BOTTLE WITH
TAMPER-PROOF CLOSURE,
PET, STERILE
Good product presentation due to
crystal-clear PET. Space-saving and
absolutely leakproof. Ideal for
storing and packing liquids.
- Sterile SAL 10-
³
(according to ISO 11137)
- With tamper-proof closure
- With moulded-in
raised graduation
Capacity Int.
diam.
Length Width Height PK Cat. No.
ml mm mm mm mm
125
250
500
1000
32
32
32
32
53
64
79
96
53
64
76
96
105
132
173
212
24
24
12
12
4.679 553
4.679 554
4.679 555
4.679 552
INDUSTRIAL JERRYCANS, HDPE,
WITH UN APPROVAL (*)
Jerrycans with capacity of 2 to 20 L, natural.
Please order closures separately.
Capacity Width Depth Height Weight Thread
external diam.
PK Cat. No.
L mm mm mm g mm
2.0
2.5
3.0
5.0
5.0
20.0
145
153
153
190
190
290
109
115
115
145
145
246
196
208
240
251
251
385
110
125
140
250
250
950
45
45*
45*
50*
50*
60*
25
25
25
10
16
6
4.679 547
4.679 548
4.679 550
4.679 546
4.679 551
4.679 549
* With UN approval.
SCREW CAPS, HDPE
For Description PK Cat. No.
2 / 2.5 litre jerrycans
5 litre jerrycans
20 litre jerrycans
5 litre jerrycans
Red, with tear-off ring
Red, with tear-off ring
Red, with tear-off ring
Black, with tear-off ring
10
10
10
10
9.140 012
9.140 013
9.140 014
9.140 015
GRIFFIN BEAKERS, PP
ISO 7056. PP. Approved for food
use. Autoclavable. Printed Scale.
Capacity Grad. Ø Height PK Cat. No.
ml ml mm mm
50
100
250
600
1000
2000
5000
5
10
25
50
50
100
500
54
71
91
118
141
172
223
58
73
93
128
150
192
262
1
1
1
1
1
1
1
7.693 030
7.693 031
7.693 032
7.693 033
7.693 034
7.693 035
7.693 036
Th. Geyer - A family business since 1892 and the partner for your laboratory
9
GLASSWARE
MEASURING CYLINDERS,
BOROSILICATE GLASS 3.3,
LOW FORM, CLASS B,
AMBER GRADUATIONS
- SILBERBRAND Eterna
- DIN EN ISO 4788
- With spout and hexagonal foot
- Graduations and inscriptions in
Eterna permanent amber stain
- Calibrated to contain IN
Capacity Grad. Height Tolerance PK Cat. No.
ml ml mm ± ml
10
25
50
100
250
500
1000
1
1
2
2
5
10
20
90
115
145
165
195
250
285
0.3
0.5
1
1
2
5
10
2
2
2
2
2
2
1
6.316 477
6.316 478
6.316 481
6.316 482
6.316 483
6.316 484
9.274 662
VOLUMETRIC FLASKS, DURAN®
,
CLASS A, BLUE GRADUATION,
WITH PE STOPPERS
IN (TD) calibrated. With dated batch
identification. Declaration of conformity
acc. to DIN 12600. With NS ground joint
and polystopper. Ring mark and
graduation in durable blue enamel,
acc. to DIN EN ISO 1042.
Capacity Tolerance Height Joint size (NS) PK Cat. No.
ml ± ml mm
50
50*
100
100
200
250
500
1000
1000*
2000
0.06
0.08
0.1
0.1
0.15
0.15
0.25
0.4
0.6
0.6
140
140
170
170
210
220
260
300
300
370
24/29
14/23
12/21
14/23
14/23
14/23
19/26
24/29
29/32
29/32
2
2
2
2
2
2
2
1
1
1
4.679 560
4.679 561
4.679 556
4.679 557
4.679 558
4.679 559
4.679 562
9.276 695
9.276 694
9.276 696
* Wide neck.
MEASURING CYLINDERS, LOW FORM,
CLASS B, AMBER GRADUATION
Low form. Class B. Made from
borosilicate glass 3.3. With functional
spout and solid hexagonal glass base.
Calibrated to ”In" (20 °C). Comply with
DIN EN ISO 4788.
Capacity Grad. Tolerance Height PK Cat. No.
ml ml ± ml mm
10
25
50
100
250
500
1000
2000
1
1
1
2
5
10
20
50
0.3
0.5
1.0
1.0
2.0
5.0
10.0
20.0
97
120
145
165
215
250
290
340
1
1
1
1
1
1
1
1
7.691 010
7.691 011
7.691 012
7.691 013
7.691 014
7.691 015
7.691 016
7.691 017
VOLUMETRIC FLASKS, CLASS A,
WITH PE STOPPER,
BLUE GRADUATION
Made from borosilicate glass 3.3. Clear
glass. With standard ground joint and
PE stopper. Calibrated to ”In“ (20 °C).
Comply with DIN EN ISO 1042.
A batch-specific certificate of conformity
is available on request.
Capacity Joint size Tolerance PK Cat. No.
ml NS ± ml
5
5
10
10
20
20
25
25
50
50
100
100
200
250
500
1000
1000
2000
7/16
10/19
7/16
10/19
10/19
12/21
10/19
12/21
12/21
14/23
12/21
14/23
14/23
14/23
19/26
24/29
29/32
29/32
0.025
0.040
0.025
0.040
0.040
0.060
0.040
0.060
0.060
0.100
0.100
0.100
0.150
0.150
0.250
0.400
0.600
0.600
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
7.691 036
7.691 020
7.691 033
7.691 021
7.691 022
7.691 034
7.691 023
7.691 035
7.691 024
7.691 025
7.691 026
7.691 027
7.691 028
7.691 029
7.691 030
7.691 031
7.691 037
7.691 032
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
10
SAMPLING
CHEMISTRY SCOOP, PP,
WITH ROD HANDLE
For aggressive liquids,
complete with strong handle
made of polypropylene.
Capacity Stem
diam.
Stem PK Cat. No.
ml mm mm
250
600
1000
20
20
20
1000
1000
1000
1
1
1
9.303 840
9.303 842
9.303 844
SAMPLING DIPPERS DISPODIPPER
STERIPLAST®
, PP,
BLUE TRANSPARENT
Scaled sampling tube manufactured in a clean room specially designed
for disposable use. Due to the blue colour, it is also perfect for use in
the food, animal feed and pharmaceutical industries. After sampling,
the container can be closed and is leakproof. DispoDipper is completely
manufactured in one piece and can be used for sampling and
subsequent transport of the sample in one device. In this way,
cross-contamination or sample impurities are almost impossible.
For sampling, first remove the cover at the predetermined breaking
point. Then take the sample with the sample container and close it
securely. After sampling, the handle at the predetermined breaking
point can be detached from the sample container. This allows for easy
and space-saving transport of the sample.
- Individually packaged and sterilised by gamma rays
- Production and packaging according to clean room class 7
- Complies with EU food requirements and FDA regulations
Capacity Diam. Height Overall
length
PK Cat. No.
ml mm mm mm
50
100
40
53
98
98
417
415
20
20
6.290 525
4.662 231
DISPOSABLE SCOOPS STERIPLAST®
BIO, GREEN PE
White. They are ideal for sampling of powder, granules and pastes.
The organic plastic Green PE is entirely made of renewable resources.
Not only with regard to quality but also with regard to its characteristics
for high-quality sampling, it is perfectly comparable with conventional
polyethylene.
- Individually packed in organic PE foil
- Gamma-sterilized
- Production, assembling and packaging
acc. to Cleanroom class 7 (10000)
- According to EU food and FDA guidelines
Capacity Length PK Cat. No.
ml mm
25 141 10 6.265 049
SAMPLE BEAKERS, STERILE, INDIVIDUALLY PACKED
Made of PP with coloured HDPE lid. Transparent. Autoclaveable without lid.
Suitable to be used in contact with food. 60 & 120 ml beakers have a
graduation and labelling field.
Capacity Colour screw cap Height Ø lid, external Pre-mounted screw cap PK Cat. No.
ml mm mm
60
120
120
120
200
Red
Red
Yellow
Blue
Red
65.5
72.5
72.5
72.5
80.0
42.5
62.5
62.5
62.5
64.0
Yes
Yes
Yes
Yes
Yes
500
250
250
250
150
7.696 279
7.696 281
7.696 285
7.696 288
7.696 283
Height including lid
SAMPLE BEAKERS, NON STERILE, BULK PACKAGING
Made of PP with coloured HDPE lid. Transparent. Autoclaveable without lid. Suitable to be used in contact with food. 60 & 120 ml beakers have a
graduation and labelling field.
Capacity Colour screw cap Height Ø lid, external Pre-mounted screw cap PK Cat. No.
ml mm mm
60
120
120
120
120
200
Red
Blue
Green
Red
White
Red
65.5
72.5
72.5
72.5
72.5
80.0
42.5
62.5
62.5
62.5
62.5
64.0
Yes
Yes
Yes
Yes
Yes
Yes
600
300
300
300
300
200
7.696 278
7.696 302
7.696 303
7.696 304
7.696 305
7.696 282
Height including lid
Th. Geyer - A family business since 1892 and the partner for your laboratory
11
SAMPLING
DISPOSABLE TWEEZERS, PS, STERILE
- Serrated handles
- Cleanroom manufactured (cleanroom class 7)
- Food-safe
Form Length PK Cat. No.
mm
Pointed / angled: fine, smooth, curved gripping tip
Pointed: straight, inside, serrated tip
Wide tip: smooth and blunt tip
130
130
130
100
100
100
4.670 759
4.670 761
4.670 763
DISPENSING SCOOPS,
STAINLESS STEEL
Made from stainless steel Remanit®
4301.
Capacity Diam. Length
Scoop
Overall
length
PK Cat. No.
ml mm mm mm
120
450
1000
1500
2000
50
75
105
120
150
100
145
190
240
250
190
250
320
350
370
1
1
1
1
1
9.201 219
9.201 222
9.201 232
9.201 235
6.080 286
SAMPLE CONTAINERS, PP
The LABSOLUTE®
containers are ideal for storing and transporting
paste-like, powdery and liquid samples.
- Highly resistant to many chemicals
- Including screw lids
- Suitable for use with food
- Autoclavable
Capacity Ø Height PK Cat. No.
ml mm mm
30
75
310
600
1250
58
58
81
119
119
19
47
81
67
130
10
10
10
10
5
7.696 270
7.696 271
7.696 272
7.696 273
7.696 274
Height including lid
SAMPLE SPOONS, PS, STERILE
Die LABSOLUTE®
sample spoons made of PS are ideal for sampling of
powders, pastes, granulates and liquids. The white spoons are sterilized
and singly wrapped. Suitable for food sector.
Volume Length PK Cat. No.
mL mm
8 150 1000 7.691 300
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
12
CHROMATOGRAPHY / SPECTROSCOPY
CRIMP NECK AND HEADSPACE VIALS ND20
Crimp neck and headspace vials ND20 with rounded or flat bottom made of clear and amber first
hydrolytic class glass need to be able to withstand very high internal pressures and, as a result,
their walls are generally 1.2 mm thick. The vials are available with a flat DIN crimp neck or with
a bevelled neck (HS neck).
On the flat DIN crimp neck, liners have a greater contact surface, which ensures a better seal.
A bevelled HS neck is required if the overpressure safety seal system patented by Perkin Elmer
is used, since excess pressure can only be reliably dissipated in vials with an HS neck.
Description Compatible with Capacity Size PK Cat. No.
ml mm
Clear glass, HS neck, rounded bottom
Clear glass, DIN crimp neck, rounded bottom
Clear glass, DIN crimp neck, flat bottom, long neck
Clear glass, DIN crimp neck, flat bottom, long neck
Clear glass, DIN crimp neck, rounded bottom, long neck
Clear glass, HS neck, rounded bottom
Perkin Elmer
Carlo Erba, CTC, Fisons, Varian (CP)
Carlo Erba, Dani, Fisons, Agilent
Carlo Erba, Dani, Fisons, Agilent
CTC PAL, Varian, Gerstel, Atas, Shimadzu und TriPlusHS
Perkin Elmer, Tekmar
5
10
10
20
20
20
38.2 x 22
46 x 22.5
46 x 22.5
75.5 x 22.5
75.5 x 22.5
75.5 x 23
100
100
100
100
100
100
7.615 908
7.615 808
7.621 813
6.204 710
7.612 926
7.620 798
1 2 3 4 5 6
WITH BROMO-BUTYL/PTFE SEPTA
These grey septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.
They are 3.0 mm thick and have a hardness of 50° shore A.
Caps PK Cat. No.
Standard, 10 mm
Headspace
Magnetic, 8 mm
100
100
100
7.615 320
7.613 446
7.612 927
Typ
(1)
(2)
(3)
(4)
(5)
(6)
7 8 9
WITH BROMO-BUTYL/PTFE SEPTA, PHARMA-FIX
These grey septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties.
They are 3.0 mm thick and have a hardness of 50° shore A.
Also on Pharma-Fix seals, it is only the butyl areas that can come into contact with the sample, and these
are PTFE coated. The areas that abut the edges of the glass are not coated. This ensures a particularly
good seal.
Caps PK Cat. No.
Standard, 10 mm
Headspace
Magnetic, 8 mm
100
100
100
7.614 955
7.621 340
7.613 329
10 11 12
BOX FOR ND20 HEADSPACE VIALS
PP. Autoclaveable. Temperature resistant from -80 to 125 °C. Stackable. Alphanumerically coded positions.
Dimensions
W x H x D
Colour Positions Vial size PK Cat. No.
mm ml
130 x 102 x 130 Blue 25 5, 10, 20 1 7.657 554
WATER, ULTRAPURE FOR AAS AND ICP, ISO 3696,
ASTM D-94, D-129, UV-FILTERED (0.4 ΜM)
Capacity Package PK Cat. No.
5 l Plastic canister 1 405.5000
Typ
(7)
(8)
(9)
Typ
(10)
(11)
(12)
CRIMP NECK AND HEADSPACE ND20
Th. Geyer - A family business since 1892 and the partner for your laboratory
13
pH AND CONDUCTIVITY MEASUREMENT
CONDUCTIVITY METERS EUTECHTM
CON150/CON450
Best value for a waterproof conductivity meter.
- Large, three line LCD, view conductivity or TDS measurement with
temperature as well as cell efficiency
- Built-in memory function, stores up to 150 measurements along with
temperature
- Adjustable temperature coeffcient, set to 0.0 % to meet USP methods
for non-compensated measurements
- Acoustic indication of necessary recalibration
- Power with AA batteries or use optional AC adapter
- Calibrate using automatically recognized standards or manually, to a
single point across all ranges or to multiple points (one calibration
point per each conductivity range)
- Ready indicator, manual or automatic measurement hold feature and
optional automatic shut-off function
- Adjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0
- Includes innovative Grip-Clip, quickly and easily secures the
electrode to your beaker or container
Additional features CON450
- Backlit display
- Built-in memory function, stores up to 500 data sets,
USB and RS232 output
- Built-in real-time clock stamps stored data and calibration data with
time and date, meets standards for GLP (Good Laboratory Practices)
Scope of supply: Meter, conductivity cell (K =1.0), Grip Clip,
2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS,
12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse)
Water, 60 ml each). CON450 additionally with USB cable
Type PK Cat. No.
CON150
CON450
1
1
6.284 907
6.282 321
Built-in Memory Function
Adjustable
Temperature Coefficient
CON150 CON450
CONDUCTIVITY SOLUTIONS
The ready-to use CHEMSOLUTE®
conductivity solutions are perfectly
suitable for calibrations.
- Values stated at 25 °C, accuracy: ±1 %
- Traceable to the National Institute of Standards and Technology
(NIST)
- ISO 17025 Certificate
Description Capacity PK Cat. No.
ml
5 µS/cm
84 µS/cm
100 µS/cm
147 µS/cm
500 µS/cm
1413 µS/cm
1413 µS/cm
12880 µS/cm
500
500
250
500
500
500
1000
500
1
1
1
1
1
1
1
1
1565.0500
1570.0500
1571.0250
1572.0500
1573.0500
1575.0500
1575.1011
1580.0500
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
Specifications
Conductivity range: 0 ... 200 mS
Resolution: 0.01 µS ... 0.1 mS
Accuracy: ±1 % full scale
Conductivity calibration: Auto/manual, 1 point per range
TDS range: 0 ... 200000 ppm (TDS factor 1.0)
Resolution: 0.01 ppm ... 100 ppm
Accuracy: ±1 % full scale
TDS calibration: Manual, 1 point per range
0 ... 50000 ppmSalinity range (CON450 only):
Resolution: 0.01
Accuracy: ±1 % full scale
Salinity calibration: Manual, 1 point
Temperature range: -10.0 ... 110.0 °C
Resolution: 0.1 °C
Accuracy: ±0.5 °C
Dimensions (W x L x H): 83 x 200 x 57 mm
Weight: 500 g
Power supply
(CON450/CON150):
Incl. 2 x AA batteries, >300 h/>500 h
continuous use, AC adapter (optional)
IP code: IP 67
Warranty: 3 years on the meter
14
pH AND CONDUCTIVITY MEASUREMENT
LLG pH METER 7
The LLG pH Meter 7 is an easy-to-use, robust table-top instrument for
measuring pH and redox potential. The large color-touch-display and
the intuitive, language-independent user interface ensure fast and easy
use. Particularly suitable for routine applications in laboratories,
production plants and schools.
- Available as set with gel combination electrode
("Made in Germany") with temperature sensor
- Large color-touch-display with language-independent
graphical user interface
- Automatic temperature compensation
- Memory for 500 values
- 3-point calibration
- Reminder function for upcoming calibrations
- BNC connection for the electrode
- RS232 interface for data transfer
- Electrode holder can be mounted left and right
Scope of supply: LLG pH meter 7, combination electrode,
electrode holder, protective cover, power supply unit
Specifications
pH range: 0 ... 14
pH resolution: 0.01
pH accuracy: ±0.01
Temperature range electrode: 0 ... 80 °C
Dimensions (W x D x H): 180 x 240 x 80 mm
Weight: 0.7 kg
Power supply: 9 V DC/1A
IP code: IP 54
Type Plug type PK Cat. No.
LLG-pH Meter 7 set EU 1 6.263 601
Intuitive Operation
Complete Set
with Electrode
Electrode
"Made in Germany"
pH METER SEVENCOMPACTTM
S210
The SevenCompact pH meter S210 is the perfect choice for a wide
range of applications. At the same time, working with the S210 is like
child's play. Starting a measurement or calibration has never been
easier, requiring only a single keypress.
- Fast and accurate measurements
- User-friendly operation
- Menu guidance in 12 languages
- Clear, well arranged color display
- Many peripheral options
- GLP compliant
Supplied with:
S210-Kit: Instrument, electrode holder, protective cover, operating
instructions, quick guide, declaration of conformity, test certificate,
InLab®
Expert Pro-ISM, guide to pH measurements, 2 buffer sachets
for pH 4.01/7.00/9.21/10.00
S210-Bio: As per S210-Kit, but with InLab®
Routine Pro-ISM cable kit
instead of InLab®
Expert Pro-ISM
Type PK Cat. No.
S210-Kit
S210-Bio
1
1
9.704 157
9.704 158
L A B W A R E
®
Specifications
pH-range: -2 ... 20
pH-relative accuracy: ±0.002
pH-resolution User-definable: 0.001/0.01/0.1
mV-range: -2000.0 ... 2000.0
mV-relative accuracy: ±0.2
mV-resolution User-definable: 0.1/1
Temperature range
MTC: -30.0 ... 130.0 °C
ATC: -5.0 ... 130.0 °C
Temperature accuracy: ±0.1 °C
Display: 4.3 inch, TFT color
Power supply: 9 ... 12V/10W
IP code: IP 54
pH BUFFER SOLUTIONS IN A TWIN-NECK BOTTLE WITH COLOUR CODING
- Accuracy: ±0.01 pH units (reference temperature 20 °C)
- Traceable to the National Institute of Standards and Technology
(NIST)
- The dyed buffer solutions allow easy identification
Description Colour Capacity PK Cat. No.
ml
pH 4.00
pH 4.00
pH 7.00
pH 7.00
pH 10.00
pH 10.00
Red
Red
Yellow
Yellow
Blue
Blue
250
1000
250
1000
250
1000
1
1
1
1
1
1
1134.0252
1134.1012
1137.0252
1137.1012
1140.0252
1140.1012
Th. Geyer - A family business since 1892 and the partner for your laboratory
15
pH AND CONDUCTIVITY MEASUREMENT
pH COMBINATION ELECTRODE,
GEL ELECTROLYTE, SENTIX®
Basic pH combination electrodes, with plastic body, gel reference
system.
Specifications
Temperature range: 0 ... 80 °C
pH range: 0 ... 14 pH
Length/diam.: 120 mm/12 mm
Electrolyte: Gel
Diaphragm: Fibre
Membrane shape: Cylindical
Membrane resistance at 25 °C: 1 G
Connector: DIN, waterproof
Type Temperature
sensor
Cable PK Cat. No.
m
SenTix®
21
SenTix®
41
-
NTC 30 k
1
1
1
1
9.040 872
9.040 876
pH COMBINATION ELECTRODES,
LIQUID ELECTROLYTE, SENTIX®
,
REFILLABLE
Standard pH combination electrodes with glass shaft, non-solid
electrolytes. With fixed cable (1m).
Specifications
Temperature range: 0 ... 100 °C
pH range: 0 ... 14 pH
Length/diam.: 120 /12 mm
Electrolyte: Liquid, KCl 3 mol/l
Diaphragm: Platinum
Membrane shape: Conical
Membrane resistance at 25 °C: 600 M
Refill hole cover: Slide
Connector: DIN, waterproof
Type Temperature
sensor
PK Cat. No.
SenTix®
81 NTC 30 k 1 9.040 886
IDS pH ELECTRODES SENTIX®
940
Low maintanance pH electrodes with plastic shaft and gel electrolyte,
with built-in temperature sensor NTC 30 kOhm. Cable length 1.5 m.
Specifications
Temperature range: 0 ... 80 °C
pH range: 0 ... 14 pH
Length/diam.: 120 mm /12 mm
Electrolyte: Gel
Diaphragm:
Membrane shape:
Membrane resistance at 25 °C:
Type PK Cat. No.
SenTix®
940 1 6.240 824
MULTIPARAMETER METERS SD 335
Depending on the set, the portable multi-parameter measuring device is
ideally suited for the precise determination of pH, redox, temperature,
conductivity/TDS/salinity as well as saturation and concentration of
dissolved oxygen.
- Intuitive user interface thanks to graphical LCD display
- Simultaneous determination of up to three parameters
due to galvanic isolation
- Selection between multi-parameter display or single value display
- Setting of alarm limits for parameter monitoring
- Micro-USB connection for software-free data transmission and
power supply
- Data logger records measurement data incl. time stamp and
measuring point ID in a fixed time interval or manually at the
push of a button
- Automatic recognition of standard solutions
- Evaluation of the sensor quality after calibration
- Rechargeable NiMH batteries
Scope of supply:
Meter, protective armouring, electrode holder for 2 electrodes,
pH/temp. electrode type 231, pH buffer (4.01/7.00/10.01), storage
solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries,
user manual
SD 335 Multi (Set 1): pH/Con/Temp. additionally:
Conductivity electrode LC 12 (< 200 mS/cm),
conductivity solution 1413 µS/cm (NIST)
SD 335 Multi (Set 2): pH/DO/Temp. additionally:
Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads,
calibration bottle with sponge
SD 335 Multi (Set 3): pH/Con/DO/Temp. additionally:
Conductivity electrode LC 12 (< 200 mS/cm),
conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor
(2 m cable), refill electrolyte, membrane heads,
calibration bottle with sponge
Specifications
pH: -2.00 ... 16.00 pH
mV: -2000 ... 2000 mV
Conductivity: 0.000 ... 500 mS/cm
TDS: 0.000 ... 500 g/l
Salinity: 0.0 ... 70.0 PSU
O2-concentration: 0.00 ... 50.00 mg/l
O2-saturation: 0.0 ... 500.0 %
Temperature: -10.0 ... 110.0 °C
Dimensions (W x D x H): 100 x 164 x 37 mm
Power supply: 3 x AAA NiMH rechargeable
batteries, Micro-USB
IP code: IP 67
Type PK Cat. No.
SD 335 Multi (Set 1) pH / Con / Temp.
SD 335 Multi (Set 2) pH / DO / Temp.
SD 335 Multi (Set 3) pH / Con / DO / Temp.
1
1
1
4.678 204
4.678 205
4.678 206
Fibre
Cylinder
< 1G
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
16
SYRINGE FILTERS
13 MM
LABSOLUTE®
syringe filters with a filter membrane diameter of 13 mm are ideal for the preparation of small-volume samples in which a very small
dead volume is particularly important. The effective filtration area is 0.6 cm² . The housing, made from blue (pore size 0.22 µm) or yellow (pore size
0.45 µm) acrylic, is pressure resistant to 5 bar. The non-sterile filters are packed in quantities of 500 in polypropylene pouches, while sterile filters are
packaged individually in blisters in quantities of 50 per box.
Properties
- Membrane diameter 13 mm (surface 0.6 cm²)
- Housing diameter 18 mm
- Low content of extractable substances
- Very low dead volume
Filter material SterilePore
size
Colour code PK Cat. No.
µm
Cellulose acetate (CA)
Cellulose acetate (CA)
Cellulose acetate (CA)
Cellulose acetate (CA)
Non sterile
Non sterile
Sterile
Sterile
0.22
0.45
0.22
0.45
Blue
Yellow
Blue
Yellow
500
500
50
50
7.699 800
7.699 801
7.699 802
7.699 803
25 MM
LABSOLUTE®
syringe filters with a filter membrane diameter of 25 mm are ideal for the preparation of samples with a volume from 1.5 ml to 100 ml.
The effective filtration area is 4.6 cm². This, in combination with the stable housing pressure resistant to 5 bar made from polypropylene (transparent)
or acrylic (pore size 0.22 µm blue or pore size 0.45 µm yellow), ensures rapid filtration. The non-sterile filters are packed in quantities of 500 in
polypropylene pouches, while sterile filters are packaged individually in blisters in quantities of 50 per box.
Properties
- Housing diameter 33 mm
- Membrane diameter 25 mm (surface 4.6 cm²)
- Low content of extractable substances
- Low dead volume
Filter material Housing Pore
size
Sterile PK Cat. No.
µm
Cellulose acetate (CA)
Cellulose acetate (CA)
Cellulose acetate (CA)
Cellulose acetate (CA)
Nylon (NY)
Nylon (NY)
Polyether sulfone (PES)
Polyether sulfone (PES)
Polyether sulfone (PES)
Polyvinylidene difluoride (PVDF)
Polyvinylidene difluoride (PVDF)
Polytetrafluoroethylene (PTFE)
Polytetrafluoroethylene (PTFE)
Regenerated cellulose (RC)
Regenerated cellulose (RC)
Acrylic
Acrylic
Acrylic
Acrylic
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
PP
0.22
0.45
0.22
0.45
0.20
0.45
0.22
0.45
0.22
0.22
0.45
0.20
0.45
0.20
0.45
Non sterile
Non sterile
Sterile
Sterile
Non sterile
Non sterile
Non sterile
Non sterile
Sterile
Non sterile
Non sterile
Non sterile
Non sterile
Non sterile
Non sterile
500
500
50
50
500
500
500
500
50
500
500
500
500
500
500
7.699 820
7.699 821
7.699 822
7.699 823
7.699 814
7.699 815
7.699 818
7.699 819
7.699 824
7.699 816
7.699 817
7.699 810
7.699 811
7.699 812
7.699 813
SYRINGE FILTERS
LABSOLUTE®
offers a comprehensive range of syringe filters that have been developed especially for the efficient filtration of aqueous and organic
solutions and for ventilation. The choice of different housing diameters, membrane types and pore sizes offers the ideal solution for your applications.
Intensive quality checks ensure consistently high quality, both of the membrane material and the filter unit as a whole, for all of the filters we supply.
- Made without the use of adhesives: the housing and membrane are welded
- Sterile versions: 100 % sterility thanks to gamma radiation
- Equipped with Luer connections
- The filters are printed, both with the membrane type and the pore size, excluding the possibility of confusion
SETUP
The syringe filters have either acrylic or PP housing. Both housing versions have Luer connections, and the membrane is secured in the housing so that
the sample fluid cannot flow around the membrane.
Th. Geyer - A family business since 1892 and the partner for your laboratory
17
CELL CULTURE
ASPIRATOR LLG-uniVACUUSYS
LLG-uniVACUUSYS Vacuum Aspiration System with integrated
vacuum pump and vacuum controller is ideally suited for aspirating
liquids in Life Science applications, e.g. the removal of media from cell
cultures, aspiration of supernatants after centrifugation, or the removal
of wash solutions from Immuno assay plates. The set vacuum is
automatically
re-adjusted in case of deviations.
- Integrated vacuum pump with
vacuum control
- Easy to use
- Self-closing connectors for quick installation and prevention of liquid
or aerosol escape
- Liquid level sensor, prevents liquid overflow
- Autoclavable waste collection bottle and nozzle
Scope of supply: Vacuum Aspiration System with integrated vacuum
pump, 4 liter waste collection bottle, single channel needles
and 8-channel needle aspirator handles, single channel and 8-channel
adaptor for 200 µl pipette tips, single channel adaptor for 1000 µl
pipette, tubing and quick-connectors
Specifications
Vacuum range: 0 ... 600 mbar (adjustable)
Aspiration rate: 1 ... 15 ml/s
Noise emission: <50 dB(A)
Dimensions (W x D x H): 180 x 320 x 530 mm
Weight: 3.4 kg
Power supply: 100 ... 240 V, 50/60 Hz
Type Plug type PK Cat. No.
LLG-uniVACUUSYS
LLG-uniVACUUSYS
EU
UK
1
1
6.263 585
6.263 586
L A B W A R E
®
Complete System
Integrated Vacuum Pump
Automatic
Vacuum Regulation
VACUUM FILTER SYSTEM
RAPID-FILTERMAX
Benefit from high quality and numerous practical product features:
- Large & square filter surface: 20% larger than comparable
conventional round shapes
- Exceptionally high flow rate
- High quality polyethersulfone filter membrane (PES) with low protein
binding, pore size 0.22 µm
- High stability
- Space-saving storage: due to the square shape of the bottle base as a
medium reservoir
Volume PK Cat. No.
ml
150
250
500
1000
18
12
10
9
6.260 260
6.260 262
6.260 264
6.260 267
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
18
CELL CULTURE
CELL CULTURE MULTIWELL PLATES,
PS, TREATED, STERILE
Numbered wells. Rounded corner in the cover reduce misplacement and
facilitate identification. Vacuum gas plasma treated surface for a
uniform and even cell adhesion. ondensation rings lead to less
evaporation. Stackable. Sterilized by radiation. Single packed.
No. of
wells
Total volume
per well
Working
volume
per well
Growth
area per
well
PK Cat. No.
ml ml cm²
4
6
12
24
48
96
1.50
17.00
6.80
3.50
1.55
0.39
0.18 - 0.28
1.90 - 2.90
0.76 - 1.14
0.38 - 0.57
0.19 - 0.29
0.075 - 0.20
1.96
9.60
3.85
1.93
0.84
0.33
100
100
100
100
100
100
7.696 789
7.696 790
7.696 791
7.696 792
7.696 793
7.696 794
CELL CULTURE FLASKS,
PS, TREATED, STERILE
The cell culture flasks from LABSOLUTE®
are made
exclusively of PS, corresponding to the highest
international standards (USP Class VI). A short, wide
and angled neck allows an easy handling while the risk
of contamination is minimized. The vacuum gas plasma
treatment of surfaces allows adherent cells a uniform
and even cell adhesion.
- Ergonomic design for easy handling
- Short and wide sloping neck for easy access
- Easily stackable
- Both flasks sides have engraved graduation with a
labelling area
- Screw cap with a hydrophobic 0.22 µm filter for
ventilation
- Packed upright in resealable bags
- Sterilized by radiation (SAL 10-6
)
Growth
area
Working
volume
Total
volume
Sterile Sub-PK PK Cat. No.
cm² ml ml Pieces
12.5
25.0
75.0
182.5
20
40
175
400
25
50
250
600
10
10
5
5
200
200
100
40
7.696 780
7.696 781
7.696 782
7.696 783
CELL STRAINERS
The LABSOLUTE®
cell strainers are made of a
strong nylon mesh and are characterized by an
even distribution of the mesh pores. With the
sterile cell sieves, cell suspensions can be quickly
and easily filtered to collect primary cells or
prepare samples for flow cytometry.
- Available in three mesh sizes: 40 µm, 70 µm
and 100 µm
- Color coded for easy distinction
- Extended edge allows easy handling even with
tweezers
- Individually packed, gamma-irradiated
(SAL 10-6
)
- DNase, RNase and pyrogen-free
Mesh
size
Colour PK Cat. No.
µm
40
70
100
Blue
White
Yellow
50
50
50
7.696 767
7.696 768
7.696 769
CELL CULTURE DISHES,
PS, TREATED, STERILE
All LABSOLUTE®
cell culture dishes are made of high-quality, optically
clear PS, so that they are also suitable for microscopy.
- Effective gas exchange
- Easily stackable
- 60 mm, 70 mm and 100 mm dishes with grip ring
- Surfaces are treated with vacuum gas plasma
- Sterilized by radiation (SAL 10-6
)
Ø Height Growth
area
Sterile Sub-PK PK Cat. No.
mm mm cm² Pieces
35
60
70
90
100
150
12
18
15
17
22
22
8.5
21.2
36.3
55.0
60.8
143.0
10
10
10
10
10
1
960
600
600
500
300
120
7.696 770
7.696 771
7.696 772
7.696 773
7.696 774
7.696 775
DEEP WELL PLATES
The LABSOLUTE®
Deep well Plates meet all the important requirements
for a wide variety of applications in cell culture, pharmacy and
molecular biology. In addition to the long-term storage of samples, the
deep well plates are suitable for a variety of other applications such as
cultivation of microorganisms, screening tests and extraction of nucleic
acids and proteins.
The plates are made of 100 % pure polymer without additives in a
class 8 clean room and are free of RNase, DNase, human DNA,
endotoxins, PCR inhibitors and ATP. Due to the precise production
according to ANSI/SLAS 2004 standard, the plates are ideally suited
for use with robots and automated liquid handling systems. The plates
made of PP offer high chemical resistance (e.g. to DMSO) and are
autoclavable at 121 °C.
Description Material Capacity PK Cat. No.
ml
Round bottom, round wells
Round bottom, round wells
Round bottom, square wells
PP
PS
PP
0.5
1.2
2.2
56
32
32
7.696 546
7.696 548
7.696 549
Th. Geyer - A family business since 1892 and the partner for your laboratory
19
LIFE SCIENCE
INCUBATOR LOVIBOND®
DI 10
Designed for the reliable incubation of dipslides in laboratories
and field work.
- Low voltage, in-car operation possible
- Holds up to 12 dipslides or 10 quanti-discs
- Excellent temperature stability
- Programmable incubation period setting
- LCD Temperature display with up/down push button control
- Rapid heating times for fast testing
- External status LEDs
Scope of supply: Incubator incl. external 12 V universal power supply,
set of leads (UK, EU, US), 12 V in-car power adapter
Temperature range: ambient +5 ... +40 °C (±0.5 °C )
Dimensions (W x D x H): 246 x 215 x 162 mm
Weight: 1.7 kg
Power supply: 110/220-240 V or 12 V
Type PK Cat. No.
Lovibond®
DI 10
Dipslide-Holder
1
1
6.291 192
6.274 399
MICROBIOLOGICAL RAPID TESTS
LOVIBOND®
DIPSLIDES
Designed to test liquids as well as surfaces. These dual-sided
Dipslides are available in a wide range of different media
types. They are ideal for use in many applications including
evaporative cooling towers, closed water circuits, cutting
fluids, food testing, and many more.
Description PK Cat. No.
TTC/TTC for total viable count (TVC)
TTC/MALT for Yeast, Moulds, Fungi, TVC
TTC/ROSE for Yeast, Moulds, Fungi, TVC
TTC/MAC for coliforms, TVC
TTC/E.COLI for E. coli/coliforms, TVC
PDM/MAC for Pseudomonas species, coliforms
TTC/PDM for Pseudomonas species, TVC
SRB for Sulphate reducing bacteria
R2A/R2A - TTC for testing of potable water
10
10
10
10
10
10
10
10
10
6.282 520
6.282 521
6.282 522
6.282 523
6.282 524
6.282 525
6.282 526
6.282 527
6.282 529
DISPOSABLE SPATULAS,
L- AND T-SHAPED, PS
The L- and T-shaped spatulas from LABSOLUTE®
are ideally suited for
the uniform plating of large volumes.
- Individually packed or pack of 5 pieces
- Smooth, rounded surface
- Gamma sterile
Description Sterile Sub-PK PK Cat. No.
Pieces
L-shape
L-shape
T-shape
T-shape
1
5
1
5
500
2000
500
2000
7.696 435
7.696 436
7.696 437
7.696 438
PETRI DISHES, PS
Made of crystal-clear PS. Prepared and packed under aseptic conditions.
Sterilisation is done by beta rays. Perfectly stackable. Heat-resistant up
to 80 °C.
Packed in sub-units of 10 plates (Ø = 35, 60 and 150 mm),
15 plates (Ø = 55 mm) or 20 plates (Ø = 94 mm).
Outer
Ø
Vents Sterile PK Cat. No.
mm
30
55
60
60
94
94
94
94
150
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
800
1005
1080
1000
480
480
480
480
180
7.696 406
7.696 409
7.696 410
7.696 405
7.696 400
7.696 402
7.696 401
7.696 403
7.696 407
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
20
LIQUID HANDLING
PASTEUR PIPETTES, LDPE
LABSOLUTE®
pasteur pipettes are made of transparent LDPE and are
suitable for food testing. Sterile also available in environmentally
friendly blister with 10 pasteur pipettes.
Capacity Sterile Package Length Grad. Drop volume PK Cat. No.
ml mm ml ml
1
1
1
3
3
3
10
10
No
Yes
Yes
No
Yes
Yes
No
No
Bulk
Individually, blistered
Packed per 10 pcs., blistered
Bulk
Individually, blistered
Packed per 10 pcs., blistered
Bulk
Bulk
154
154
154
154
154
154
170
300
0.25
0.25
0.25
0.5
0.5
0.5
-
-
0.040
0.040
0.040
0.040
0.040
0.040
0.056
0.045
500
500
500
500
500
500
200
100
7.691 200
7.691 201
7.691 206
7.691 202
7.691 203
7.691 207
7.691 204
7.691 205
SINGLE-CHANNEL PIPETTES
User-friendliness and superlative quality make the LABSOLUTE®
single-
channel pipettes the perfect instrument for your laboratory. The colour
coding on the push button allows the volume range of the pipettes to be
recognized at a glance.
Easy personalization
The pack contains seven coloured rings (in red, white, yellow, black,
pink, violet and green). These allow you to mark the pipette and
thereby visually assign them at a glance.
Stable shaft
The high-quality material ensures particular stability and longevity for
the pipettes, even in high-use situations.
Contamination-free working
The pipettes in the larger volume range (7.695 706 and 7.695 707)
have an exchangeable sterile filter in the shaft which protects against
cross-contamination and must be removed before autoclaving. All other
models are fully autoclavable.
Volume range Colour code Grad. PK Cat. No.
µl µl
0.1 - 2
0.5 - 10
2 - 20
10 - 100
20 - 200
100 - 1000
500 - 5000
1000 - 10000
White
White
Yellow
Yellow
Yellow
Blue
White
White
0.002
0.02
0.02
0.2
0.2
2.0
10
20
1
1
1
1
1
1
1
1
7.695 700
7.695 701
7.695 702
7.695 703
7.695 704
7.695 705
7.695 706
7.695 707
PIPETTE STAND WITH DUAL BINS
FOR PIPETTE TIPS
This acrylic LABSOLUTE®
pipette rack
keeps your pipettes and tips together
in one convenient stand. You can
store up to four pipettes within the
provided openings. The dual
reservoirs offer space for different
sizes of pipette tips which you can
easily access even while wearing
gloves. The transparent lid allows for
dust-free storage of your tips.
Universally compatible with different
pipette models.
Dimensions (W x H x D):
244 x 246 x 165 mm
Description PK Cat. No.
Pipette stand 1 7.695 716
PIPETTE STAND
Use the LABSOLUTE®
pipette stand
as a laboratory helper to store your
pipettes securely and, at the same
time, have them easily to hand. Size
or model differences are immaterial
with this concept.
- Convenient storage of up to eight
single or multichannel pipettes
- Easy to clean
- Non-rotatable
Description PK Cat. No.
Pipette stand 1 7.695 717
Th. Geyer - A family business since 1892 and the partner for your laboratory
21
LIQUID HANDLING
BOTTLE-TOP DISPENSERS DISPENSETTE®
S
The Dispensette®
S bottle-top dispenser makes liquid dosing easy and
secure.
- Discharge tube, with and without recirculation valve
- Valve system - tight sealing without additional sealing rings
- Fast venting through improved aerodynamics
- Minimal force needed to operate - especially with high-volume devices
- Secure volume fixing with analog slide
- 1 ml dispenser - available as digital and analog version
- Autoclavable (121 °C)
- Easy to calibrate and adjust in order to comply with ISO 9001 and GLP
guidelines
- Easy to disassemble for cleaning
- Removable filling and exhaust valve with safety bulb (closes when
discharge tube is not mounted)
- To allow the bottle label to face the user, the valve block can be
rotated by 360 °
- Telescope filling tube easily adjusts to different bottle sizes
- DE-M marking
- Analog volume display
- Quickly adjustable dosing volume
Included items:
Bottletop dispensers Dispensette®
S, DE-M marked and supplied with
performance certificate, telescope filling tube, recirculation valve
(optional), mounting tool and adapters made of PP.
DISPENSETTE®
ANALOG S
Red color code. Wide range of applications, ideal for dispensing aggressive reagents, e.g. concentrated bases and acids such as H3PO4, H2SO4
(except as HCl, HNO3 and HF), saline solutions and a variety of organic solvents.
Volume Grad. Accuracy
max. vol.
Precision
max. vol.
Recycle
valve
Description PK Cat. No.
ml ml (± R%) ( CV%)
0.5 - 5
0.5 - 5
1 - 10
1 - 10
2.5 - 25
2.5 - 25
5 - 50
5 - 50
10 - 100
10 - 100
0.10
0.10
0.20
0.20
0.50
0.50
1.00
1.00
1.00
1.00
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
without
with
without
with
without
with
without
with
without
with
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
1
1
1
1
1
1
1
1
1
1
9.284 384
9.284 385
9.284 386
9.284 387
9.284 388
9.284 389
9.284 390
9.284 391
9.284 392
9.284 393
DISPENSETTE®
ORGANIC ANALOG S
Yellow color code. Ideal for dispensing organic solvents, e.g., chlorinated and fluorinated hydrocarbons such as trichlorotrifluoroethane and methylene
chloride, or concentrated acids such as HCl and HNO3 (not HF) as well as trifluoroacetic acid (TFA), tetrahydrofuran (THF) and peroxides.
Volume Grad. Accuracy
max. vol.
Precision
max. vol.
Recycle
valve
Description PK Cat. No.
ml ml (± R%) ( CV%)
0.5 - 5
0.5 - 5
1 - 10
1 - 10
2.5 - 25
2.5 - 25
5 - 50
5 - 50
10 - 100
10 - 100
0.1
0.1
0.2
0.2
0.5
0.5
1.0
1.0
1.0
1.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
without
with
without
with
without
with
without
with
without
with
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
Incl. quality certificate
1
1
1
1
1
1
1
1
1
1
9.284 426
9.284 427
9.284 428
9.284 429
9.284 432
9.284 433
9.284 436
9.284 437
9.284 438
9.284 439
Dispensette®
S Analog
Dispensette®
S Organic Analog
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
22
TRANSPORT AND PACKING
STORAGE AND TRANSPORT
CONTAINERS, PP/HDPE
White.
Made of thermoplastic resin.
Stackable.
Capacity External
dimensions
(W x D x H)
Material PK Cat. No.
Litres mm
9
10
23
28
31
50
96
560 x 360 x 64
445 x 345 x 90
460 x 330 x 210
660 x 450 x 130
550 x 450 x 170
660 x 450 x 220
660 x 450 x 410
PP
PP
HDPE
HDPE
HDPE
HDPE
PP
1
1
1
1
1
1
1
9.301 643
9.301 641
9.301 663
9.301 647
9.301 645
9.301 649
9.301 651
LIDS FOR STACKING AND
TRANSPORT CONTAINERS
For Width Length PK Cat. No.
mm mm
9.301 647 / 649 / 651
9.301 663
450
330
660
460
1
1
9.301 655
9.301 664
LABORATORY TROLLEY
CLAX MOBIL COMFORT
Stable, multi-use trolley with
parking brake.
Push-button
collapsing/unfolding.
Made in Germany.
Load capacity
Total: 60 kg
Upper shelf: 20 kg
Lower shelf: 40 kg
Dimensions and weight
unfolded (L x W x H): 900 x 580 x 1020 mm
collapsed (L x W x H): 710 x 550 x 190 mm
Weight without box: 6.9 kg
Folding box dimensions
Inner dimensions (W x D x H): 335 x 495 x 258 mm
Outer dimensions (W x D x H): 350 x 500 x 260 mm
Type PK Cat. No.
Laboratory Trolley clax Mobil comfort,
incl. 1 clax folding box, 46 litres
1 9.148 100
WIPE ROLL, CELLULOSE
The 2-ply wipe roll from
LABSOLUTE®
is absorbent
and tear-resistant. Two rolls
each with 50 sheets of
20 x 26 cm are packed
in a shrink wrap.
- White
- Grammage: 2 x 18 g/m²
- Inner core Ø: 45 mm
Description PK Cat. No.
Roll with 50 sheets 2 7.695 253
LABORATORY WIPES, 2-PLY
The LABSOLUTE®
laboratory wipes made of non-chlorine bleached
cellulose are especially low-lint and soft.
Description Width Length PK Cat. No.
mm mm
30 boxes with 150 wipes 210 220 30 7.695 251
Th. Geyer - A family business since 1892 and the partner for your laboratory
23
OCCUPATIONAL SAFETY
CHEMICAL SORBENTS
EMERGENCY KIT
The kit has the optimal combination of different sorbents. Ready to use.
Quick and safe aid for accidental spillages of almost all hazardous
liquids. *Capacity per piece.
Capacity Size Absorption* PK Cat. No.
10 wipes, 1 pillow, 1 waste bag 7 x 40 x 28 cm
approx. 5l 1 9.264 104
SAFETY GLOVES
UVEX K-BASIC EXTRA 6658,
CUT AND HEAT-PROTECTION
This coarse-knitted glove made of 100% Kevlar®
is lined with cotton,
making it ideal for protecting the wearer against heat and cuts.
1 pair per pack.
EN 388
2442D
EN 407
X2XXXX
Length: 220 ... 270 mm
Colour: yellow
EN: 388 (2 4 4 2 D), EN 407 (X 2 X X X X)
Size PK Cat. No.
8
10
12
1
1
1
9.414 660
9.414 661
9.414 662
up to +250°C
SAFETY SPECTACLES VISION
Ideal for spectacle wearers: LABSOLUTE®
vision. These lightweight over
spectacles are also impressive due to their reliable protection,
unrestricted lateral view and user-friendly wearing comfort.
Lightweight over-spectacles for your safety
- Unrestricted lateral view
- Excellent comfort and secure grip thanks to soft plastic on the arm
ends
Description PK Cat. No.
Safety spectacles vision 1 7.696 002
ABSORBENT FOR CHEMICALS
CHEMSOLUTE®
SORB
CHEMSOLUTE®
Sorb is an innovative chemical binding agent with a
polymer/mineral basis, which can be used anywhere for all liquids apart
from mercury. The chemicals and oils absorbed are very quickly and
effectively bound, which avoids placing a burden on personnel and the
environment and reduces the fire hazard, also for liquids with a high
vapour pressure.
Due to the fine-granular structure, CHEMSOLUTE®
Sorb doesn’t create
dust and can therefore be used in inside spaces without any problems.
As a registered oil binder under guideline Type III R (MPA NRW 22 000
8388 10), it is also ideally suited for circulation areas.
- Very high binding capacity
- Simple to dose
- Doesn’t create dust
- Skin-compatible
- With barrier formation function
- Colour change shows acids (yellow) and alkalis (red)
- Saturation evident from colour intensity
Capacity Package PK Cat. No.
1,800 ml
4,000 ml
5 kg
Plastic bottle
Plastic bottle
Plastic canister
1
1
1
2418.0001
2440.0001
2450.0001
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
24
TEMPATURE MEASUREMENT
LABORATORY MAX./MIN.
THERMOMETER
Display of current, highest and lowest temperature, hold function,
alarm at freely adjustable temperature values optical and audibly
(upper/lower limit), selectable °C/°F readout. Supplied with table
stand and magnet. 3V Lithium CR2032 button cell (acc. to EN 13485).
Specifications
Sensor: NTC
Resolution: 0.1 °C
Response time t90: appr. 15 seconds in water
Dimensions (L x W x H): 86 x 57 x 30 mm
Sensor tube (L x diam.): 30 x 5 mm
Weight: 100 g
Type Measuring
range
Accuracy Cable PK Cat. No.
°C (±) °C m
LT102 -50 ... 70 1 3 1 9.851 022
INSERTION THERMOMETER
POCKET-DIGITEMP
Waterproof instrument in plastic housing (food-grade). Low budget,
durable instrument for measuring temperature in air, gas, liquid and
ductile substances (acc. to EN 13485).
Range of applications: Food (HACCP), industry, agriculture
- 1-second measuring frequency
- Max-Min-Hold function
- °C/°F-selectable
±0.8 °C (at 0 ... 100 °C) others 1.5 °C
Dimensions: 202 x 20 x 16 mm (long version)
150 x 20 x 16 mm (short version)
Probe dimensions: 126 x 3.5 mm (long version)
75 x 3.5 mm (short version)
Weight: 40 g
IP code: IP 65
Type PK Cat. No.
Short version
Long version
1
1
9.851 028
9.851 029
LLG-GENERAL PURPOSE
THERMOMETERS ECONOMY
Solid stem, with loop, capillary yellow enameled,
graduation resistant against acids and alkalis.
Red environmentally friendly filling.
Measuring
range
Graduations Length Diam. PK Cat. No.
°C °C mm mm
-10 ... 50
-10 ... 100
-10 ... 150
-10 ... 200
-10 ... 250
1
1
1
1
1
300
300
300
300
300
6
6
6
6
6
1
1
1
1
1
9.237 010
9.237 011
9.237 012
9.237 013
9.237 014
INFRA-RED THERMOMETER WITH
LASER SCANTEMP 385
With IR thermometers you can measure surface temperature.
A short response time and non-contact measurement are key
advantages. Ideal for monitoring applications such as: Food and
corrosive substances
±2 % or 2 °C, the higher value counts
Response time: < 1 s
Spectral sensitivity: 6 ... 14 µm
Operating temperature: 0 ... 50 °C
Optical resolution: 12:1
Laser: Spot laser
Dimensions (L x W x H): 147.9 x 112.6 x 41.4 mm
Weight: 150 g (incl. packaging)
Power supply: 2 x 1.5 V AAA Batteries
Type PK Cat. No.
ScanTemp 385 1 9.851 996
For Measurements in Difficult
to Access or hazardous Areas
L A B W A R E
®
Specifications
Temperature range: -35 ... 365 °C
Precision:
Sensor: NTC
Measuring range: -40 ... 200 °C
Resolution: 0.1 °C
Accuracy:
Th. Geyer - A family business since 1892 and the partner for your laboratory
25
TIME MEASUREMENT
MECHANICAL TIMER
Practical mechanical LABSOLUTE®
timer in robust white casing with
white rotary knob and black scale.
- Dimensions (W x H x D): 68 x 68 x 40 mm
- No need for batteries
- Variable attachment options for mounting or hanging with a sticker
that allows the timer to be secured to smooth surfaces
- Available as a 60- or 120-minute timer
Description PK Cat. No.
Mechanical timer 0 - 60 min
Mechanical timer 0 - 120 min
1
1
7.695 452
7.695 451
BASIC TIMER
Handy, lightweight and functional timer in a sleek design.
- Dimensions (W x H x D): 50 x 69 x 8 mm
- LR-44 battery included
- Countdown function
- Four-digit display up to 99 minutes, 59 seconds
- With magnet on the back side
- With power switch on the back side for longer battery life
Description PK Cat. No.
Basic timer 1 7.695 455
DUAL TIMER
Two electronic timers in one device: the LABSOLUTE®
dual timer is ideal
for comparing different countdown or countup times. The elapsed time
is indicated both audibly and visibly by the T1 and T2 buttons lighting
up green and then red during the countdown. Intuitive operation: the
large convenient display as well as clearly legible figures make this
timer exceptionally easy to use.
- Dimensions (W x H x D): 90 x 75 x 20 mm
- 2 x AAA batteries included
- Large display with two-part display, each six-digit, up to 99 hours,
59 minutes, 59 seconds
- Audible alarm volume has three level settings
- Visual alarm
- Memory function
- Simple fastening with magnet, clip and stand
Description PK Cat. No.
Dual timer 1 7.695 454
ELECTRONIC STOPWATCH
The LABSOLUTE®
stopwatch counts up to 30 minutes at one hundredth
of a second accuracy and then up to 24 hours to the second. Each
watch is calibrated in an accredited laboratory and supplied with a
calibration certificate.
- Alarm function
- Time and calendar display
- Memory function (stores one lap time)
- Including CR2032 battery
Description PK Cat. No.
Electronic stopwatch 1 7.695 459
-99%
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
26
KJELDAHL / SOXHLET
KJELDAHL FLASKS, BEADED RIM,
BOROSILICATE GLASS 3.3
The LABSOLUTE®
Kjeldahl flasks with a beaded rim
without standard ground joint are made from
borosilicate glass 3.3 that complies with ISO 3585.
The neck diameter including rim is around 40 mm
for all volumes. The flasks correspond to the
standards of the European Pharmacopoeia 7 for
glass type I.
Capacity Diameter Height PK Cat. No.
ml mm
100
250
500
60
81
101
200
270
300
1
1
1
7.690 070
7.690 071
7.690 072
Max. external flask diameter
EXTRACTION THIMBLES, CELLULOSE
The LABSOLUTE®
extraction thimbles are made of
100 % cellulose. They have a high mechanical
stability and are free from binders. The extraction
thimbles have a wall thickness of about 1 mm and
a pore size of approximately 5 µm. They are
perfect for all kind of Soxhlet extractions as well
as for the separation of liquid and solid particles
out of air and gases.
Int.
diam.
Length PK Cat. No.
mm mm
22
30
33
33
80
80
80
94
25
25
25
25
7.699 210
7.699 211
7.699 212
7.699 213
Description PK Cat. No.
Sulphuric acid p. a. (min. 97.0 %) 2.5 l 822.2500
Sulphuric acid p. a. (min. 97.0 %)
Based on the very low nitrogen content (max. 1 ppm), ideally suited to nitrogen determination
SELECTED CHEMSOLUTE®
PRODUCTS
Our CHEMSOLUTE®
and LABSOLUTE®
portfolio offers you a wide range of products for
the nitrogen determination method developed by Danish chemist Johan Kjeldahl in 1883.
Description PK Cat. No.
Sodium sulphate anhydrous p. a., ACS (min. 99.0 %), granules
Sodium sulphate anhydrous p. a., ACS (min. 99.0 %), powder
1 kg
1 kg
1327.1000
1337.1000
Sodium sulphate anhydrous p. a., ACS (min. 99.0 %)
Suitable for increasing the boiling point during digestion. Nitrogen assay (N) max. 5 ppm.
Description PK Cat. No.
Potassium sulphate p. a., ACS, ISO, Ph. Eur. (min. 99.0 %) 1 kg 1697.1000
Potassium sulphate p. a., ACS, ISO, Ph. Eur. (min. 99.0 %)
Suitable for increasing the boiling point during digestion. Nitrogen assay (N) max. 5 ppm.
Description PK Cat. No.
Sodium hydroxide solution 32 % w/w p. a. 2.5 l
5 l
10 l
25 l
1390.2511
1390.5011
1390.9010
1390.9025
Sodium hydroxide solution 32 % w/w p. a. (for Kjeldahl N determination)
Nitrogen assay (N) max. 1 ppm.
Description PK Cat. No.
Boric acid p. a., ACS, ISO, Ph. Eur. (min. 99.8 %) 1 kg 2563.1000
Boric acid p. a., ACS, ISO, Ph. Eur. (min. 99.8 %)
Description PK Cat. No.
Boric acid solution 1 % 5 l 2557.5000
Boric acid solution, with indicator
Description PK Cat. No.
Boric acid solution 2 %
Boric acid solution 4 %
5 l
5 l
2544.5000
2545.5000
Boric acid solution, without indicator
mm
Th. Geyer - A family business since 1892 and the partner for your laboratory
27
WEIGHING
ANALYTICAL BALANCES PIONEER®
PX
High-performance, economical balances with high accuracy and
repeatability for applications in laboratories, industry and education.
For basic weighing, parts-counting, percent weighing, dynamic weighing
and density determination.
- 2 line, backlit LCD display
- 4 quick keys enable the most common weighing modes
- Draftshield
- USB and RS 232 interface for data exchange with PCs and PLCs
- User-selectable span calibration points
- Real-time clock with GLP/GMP data
- Cast metal lower housing, removable stainless steel weighing pan
- Integrated weigh-below-hook
- Auto-tare
- Many weighing units selectable, a custom unit can be defined
- Models with removable side draftshield doors and static removal bar
made from ABS
- Overload, underload and stability indicator
- 4 menu languages
Please note: Models with extra code D are with dual range function.
Specifications
Permissible ambient temperature range: 10 ... 30 °C
Height in draftshield: 235 mm
Dimensions (W x D x H): 209 x 321 x 309 mm
Weight: 4.5 kg
Power supply: 100 ... 240 V/50 ... 60 Hz
Type Weighing
range
Readability Reproducibility Linearity Plate
diam.
PK Cat. No.
g mg ± mg ± mg mm
PX125D
PX85
PX225D
PX124
PX224
52 / 120
82
82 / 220
120
220
0.01 / 0.1
0.01
0.01 / 0.1
0.1
0.1
0.02 / 0.1
0.02
0.02 / 0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
80
80
80
90
90
1
1
1
1
1
4.663 320
4.663 322
4.663 324
4.663 327
4.663 330
Reliable Results
at a Fair Price
SQUARE, PS
The antistatic dishes feature a flat bottom for a secure stand.
The round corners simplify the transfer of each kind of sample.
Colour Volume ca. Dimensions
W x H x D
PK Cat. No.
ml mm
White
White
White
Black
Black
Black
10
100
330
10
100
330
46 x 8 x 46
85 x 24 x 85
140 x 22 x 140
46 x 8 x 46
85 x 24 x 85
140 x 22 x 140
500
500
500
500
500
500
7.696 256
7.696 257
7.696 258
7.696 259
7.696 260
7.696 261
DIAMOND-SHAPED, PS
The flexible design of these antistatic weighing dishes is ideally suited
to transfer even small amounts of samples precisely.
Colour Volume ca. Dimensions
W x H x D
PK Cat. No.
ml mm
White
White
White
Black
Black
Black
5
30
100
5
30
100
55 x 6 x 35
78 x 14 x 56
119 x 19 x 90
55 x 6 x 35
78 x 14 x 56
119 x 19 x 90
500
500
500
500
500
500
7.696 250
7.696 251
7.696 252
7.696 253
7.696 254
7.696 255
WEIGHING BOATS
The LABSOLUTE®
weighing boats made of PS feature smooth surfaces to transfer each kind of sample easily with minimal sample loss. The material is
antistatic, biologically inert and resistant to both weak and diluted acids, bases and alcohols and to temperatures from -10 °C up to 70 °C. All dishes
are food-grade compliant and can be used with microwave moisture analyzers.
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
28
TUBE RACKS
RACKS FOR CENTRIFUGE TUBES
The LABSOLUTE®
racks for 15 ml (Ø 17 mm) and 50 ml (Ø 30 mm) centrifuge tubes are made of reinforced nylon and
moulded in one piece.
- Flat labelling area
- Suitable for use in water bath
- Available in two sizes
- Autoclavable
FOR 15 ML CENTRIFUGE TUBES
Array Colour Width Height Depth PK Cat. No.
mm mm mm
6 x 6
6 x 6
6 x 6
6 x 12
6 x 12
6 x 12
6 x 12
6 x 12
White
Green
Yellow
White
Blue
Red
Green
Yellow
126
126
126
248
248
248
248
248
58
58
58
70
70
70
70
70
126
126
126
127
127
127
127
127
1
1
1
1
1
1
1
1
7.696 320
7.696 323
7.696 324
7.696 310
7.696 311
7.696 312
7.696 313
7.696 314
FOR 50 ML CENTRIFUGE TUBES
Array Colour Width Height Depth PK Cat. No.
mm mm mm
3 x 3
3 x 3
3 x 3
3 x 3
3 x 3
3 x 8
3 x 8
3 x 8
3 x 8
White
Blue
Red
Green
Yellow
White
Red
Green
Yellow
109
109
109
109
109
283
283
283
283
84
84
84
84
84
83
83
83
83
109
109
109
109
109
108
108
108
108
1
1
1
1
1
1
1
1
1
7.696 325
7.696 326
7.696 327
7.696 328
7.696 329
7.696 315
7.696 317
7.696 318
7.696 319
UNIVERSAL RACKS FOR DIFFERENT TUBE SIZES, PP
The practical, autoclavable LABSOLUTE®
racks made of PP offer space
for four different sizes of tubes: 4 x 50 ml (Ø well 30 mm) and
12 x 15 ml (Ø well 17.5 mm) conical centrifuge tubes, 32 x 1.5/2.0 ml
(Ø well 11.6 mm) and 32 x 0.5 ml (Ø well 8.2 mm) tubes. The racks
feature side links so that single racks can be united to one big entity.
- Available in different colours
- Dimensions (W x H x D): 174 x 95 x 52 mm
Colour PK Cat. No.
Blue, yellow, green, orange, pink
Blue
Yellow
Green
Orange
Pink
Transparent
5
1
1
1
1
1
1
7.696 370
7.696 371
7.696 372
7.696 373
7.696 374
7.696 375
7.696 376
RACKS FOR PCR TUBES,
PP, 96 WELLS
The autoclavable LABSOLUTE racks made of PP are suitable both for
96 (Ø well 5.2 mm) single 0.2 ml tubes and for strips of PCR tubes.
The individual positions are marked with figures and letters which
simplifies organization of your samples. With or without lid - the
decision is yours: the hinged lid can be completely removed.
- Available in different colours
- Dimensions (W x H x D): 130 x 33 x 98 mm
Colour PK Cat. No.
Blue, yellow, green, orange, pink
Blue
Green
Transparent
5
1
1
1
7.696 360
7.696 361
7.696 362
7.696 363
RACKS FOR MICRO TUBES,
PP, 80 WELLS
The stable, autoclavable LABSOLUTE®
racks made of PP provide space
for up to 5 x 16 tubes (Ø well 11 mm). The wells are suitable both for
1.5 ml and 2.0 ml tubes and individually marked.
- Available in different colours
- Dimensions (W x H x D): 225 x 28 x 67 mm
Blue, yellow, green, orange, pink
Blue
Yellow
Green
Orange
5
1
1
1
1
7.696 351
7.696 352
7.696 353
7.696 354
7.696 355
Colour PK Cat. No.
Th. Geyer - A family business since 1892 and the partner for your laboratory
29
CENTRIFUGING
MICROLITER CENTRIFUGE Z 207 M
The Microliter Centrifuge Z 207 M was designed specifically for small,
compact spaces, suitable in any laboratory setting. Distinct control
panel "Touch" function for easy operation, also with gloves. Optimum
air cooling of the samples even at maximum speed.
- Maintenance-free induction drive
- Rapid acceleration and deceleration
- Noise level below 60 dBA at 17.317 x g
- Microprocessor with large LCD Display
- Active imbalance-identification and cut off
- Audible signal at the end of each run
- Quick access to samples with a snap on lid
- Quick-key for short runs
- Storage of up to 99 runs
Without rotor. Please order separately.
Specifications
Max. RCF: 17.317 x g
Max. speed: 13.500 rpm
Max. capacity: 24 x 1.5/2.0 ml
Timer: 59 min 50 sec/10 sec increments
99 h 59 min/1 min increments
Power consumption: 170 W
Dimensions (W x D x H): 280 x 350 x 240 mm
Weight: 12.5 kg
Power supply: 230 V, 50/60 Hz
Description PK Cat. No.
Microliter Centrifuge Z 207 M
Fixed-angle rotor 24 x 1.5/2.0 ml, hermetically sealed
1
1
6.290 909
6.290 911
MINI CENTRIFUGE LLG-uniCFUGE 5
WITH TIMER AND DIGITAL DISPLAY
Fixed angle rotor with lid, made of aluminium for 12 x 1.5/2 ml tubes
with optimised aerodynamics which minimize heat and noise during
operation. Operation in RPM or RCF mode possible by simple
switching. Short-Spin mode with selectable RZB and RPM values.
Large LCD (3.9") display with intuitive interface. Integrated
imbalance-detection with automatic shutdown. Wide suction feet
provide a stable base. The centrifuge can be controlled via computer by
using the included software that can store up to 99 user-defined
programmes. Operational record output to Excel.
The following types of vessel can be used:
12 x 0.2 ml PCR tubes
12 x 0.4 ml centrifuge tubes
12 x 0.5 ml centrifuge tubes
12 x 1.5 ml centrifuge tubes
12 x 2.0 ml centrifuge tubes
Scope of supply: Centrifuge with rotor for 12 x 1.5/2 ml tubes,
power supply with USB cable, 12 Adapters for 0.4/0.5 ml tubes,
12 Adapters for 0.2 ml tubes, Allen wrench with T handle, Software CD
Optional:
- Rotor for 16 x 0.2 ml tubes or 2 x 8 PCR-stripes (Cat. No. 6.263 535)
Specifications
Max. RCF: 15.595 x g
Max. speed: variable from 500 ... 15.000 rpm
Motor: brushless DC motor
Max. load: 12 x 2 ml PCR tubes
Timer: 0 ... 999 min
Dimensions (W x D x H): 262 x 230 x 131 mm
Weight: 4 kg
Power supply: 100 ... 240 V, 50/60 Hz
Type Plug type PK Cat. No.
LLG-uniCFUGE 5
LLG-uniCFUGE 5
EU
UK
1
1
6.263 530
6.263 531
ROTOR FOR MINI CENTRIFUGE
LLG-uniCFUGE 5
Description PK Cat. No.
Rotor for 16 x 0.2 ml tubes or
2 x 8 PCR-stripes
1 6.263 535
L A B W A R E
®
SAFE SEAL MICRO TUBES, PP
The safe seal micro tubes from LABSOLUTE®
have a special locking
mechanism preventing unintentional opening of the lid during
applications with thermal stress.
- Frosted cover and labelling field
- Graduation for easy volume determination
- Non-sterile
- Autoclavable
Volume PK Cat. No.
ml
0.5
1.5
2.0
1000
1000
1000
7.696 755
7.696 756
7.696 757
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
30
MIXING AND STIRRING
MAGNETIC STIRRER
LLG-uniSTIRRER 2
Compact and cost-efficient magnetic stirrer without heating for
volumes up to 1000 ml. Adjustable speed from 0 to 2000 rpm.
Plate diameter 120 mm. Body made of ABS.
Support rod, aluminium (Cat. No. 6.263 435) available as an optional
accessory.
Scope of supply: Magnetic stirrer, mains adapter,
2 stirring rods 27 x 8 mm and 34 x 8 mm
Specifications
Stirring quantity (H2O): 1000 ml
Speed range: 0 ... 2000 rpm
Permissible ambient temperature: 0 ... 50 °C
Magnetic bar: 25 x 8 mm
Display: Analog
Heating plate: 120 x 120 mm
Dimensions (W x D x H): 150 x 135 x 53 mm
Weight: 0.5 kg
Power supply: 100 ... 230 V,
50/60 Hz
IP code: IP 21
Type Plug type PK Cat. No.
LLG-uniSTIRRER 2
LLG-uniSTIRRER 2
EU
UK
1
1
6.263 430
6.263 431
Compact
Value for Money
Ideal for Schools
L A B W A R E
®
MAGNETIC STIRRING BARS,
CYLINDRICAL, PTFE
The cylindrical LABSOLUTE®
magnetic stirring bars
have a smooth surface and are supplied in lengths
from 10 mm to 80 mm. The PTFE coating means
that they are particularly resistant to chemicals and
temperatures.
Length Ø PK Cat. No.
mm mm
10
15
20
25
30
35
40
45
50
60
70
80
6
6
6
6
6
6
8
8
8
9
9
9
10
10
10
10
10
10
10
10
10
10
10
10
7.695 100
7.695 101
7.695 102
7.695 103
7.695 104
7.695 105
7.695 106
7.695 107
7.695 108
7.695 109
7.695 110
7.695 111
BEAKERS, LOW FORM,
BOROSILICATE GLASS 3.3
DIN 12331. ISO 3819.
Borosilicate glass 3.3. With
volume scale and spout.
Autoclavable.
Nominal volume Diameter Height PK Cat. No.
mlmm
mm
5
10
25
50
100
150
250
400
600
800
1000
2000
3000
5000
22
26
34
42
50
60
70
80
90
100
105
130
150
170
30
35
50
60
70
80
95
110
125
135
145
185
210
270
10
10
10
10
10
10
10
10
10
10
10
4
4
2
7.690 000
7.690 001
7.690 002
7.690 003
7.690 004
7.690 005
7.690 006
7.690 007
7.690 008
7.690 009
7.690 010
7.690 011
7.690 012
7.690 013
External beaker diameter, without spout
BEAKERS, HIGH FORM,
BOROSILICATE GLASS 3.3
DIN 12331. ISO 3819.
Borosilicate glass 3.3. With
volume scale and spout.
Autoclavable.
Nominal volume Diameter Height PK Cat. No.
ml mm
mm
25
50
100
150
250
400
600
800
1000
2000
3000
30
38
48
54
60
70
80
90
95
120
135
55
70
80
95
120
130
150
175
180
240
280
10
10
10
10
10
10
10
10
10
6
6
7.690 014
7.690 015
7.690 016
7.690 017
7.690 018
7.690 019
7.690 020
7.690 021
7.690 022
7.690 023
7.690 024
External beaker diameter, without spout
STIRRING BAR RETRIEVERS
The LABSOLUTE®
stirring bar retrievers in lengths of 150, 250 and
350 mm are suitable for removing magnetic stirring bars from vessels
of all kinds. For this purpose, they have a strong permanent magnet
(Alnico 5) with a 10 mm diameter. The PTFE coating means that the
stirring bar retrievers are particularly resistant to chemicals and
temperatures.
Length Ø PK Cat. No.
mm mm
150
250
350
10
10
10
1
1
1
7.695 120
7.695 121
7.695 122
Th. Geyer - A family business since 1892 and the partner for your laboratory
31
MIXING AND STIRRING
MICROSTAR digital
These powerful overhead stirrers convince with perfect basic functionalities. They have a compact, space-saving design and are
easy-to-use.
- Operation via a stable rotary knob
- Hardened glass display for maximum visibility and chemical resistance
- Display clearly shows the rotational speed
- Regular software updates can be made rapidly and simply via the USB interface
- Chemical resistant housing
- Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity
- 10 year warranty
Type PK Cat. No.
MICROSTAR digital 7.5
MICROSTAR digital 15
MICROSTAR digital 30
1
1
1
4.665 208
6.313 057
6.274 940
MICROSTAR digital 30
MINISTAR digital
Type PK Cat. No.
MINISTAR digital 20
MINISTAR digital 40
MINISTAR digital 80
1
1
1
7.983 353
4.665 663
7.983 354
MINISTAR digital 40
PROPELLER, 3 BLADES, PTFE
The blades are inclined at 45 °. Recommended for medium to high
speed operations.
Ø
agitator
Ø
agitator shaft
To fit
chuck
diam.
Length Blades PK Cat. No.
mm mm mm mm
50
75
75
75
140
140
6
8
10
10
10
10
4.0
6.5
8.0
8.0
8.0
8.0
450
350
450
800
600
800
round
angular
angular
angular
round
round
1
1
1
1
1
1
9.197 138
9.197 130
9.197 140
9.197 149
9.197 194
9.197 195
DIAGONAL BLADE STIRRING ROTORS,
4-BLADE, STAINLESS STEEL 1.4305
The 4-blade diagonal blade stirring rotor provides axial flow and creates
increasing shear forces at higher stirring speeds. Recommended for
medium to high speed operations.
Other sizes available on request.
Ø
agitator
Ø
agitator shaft
Length PK Cat. No.
mm mm mm
50
100
8
8
350
540
1
1
9.197 006
9.197 009
IKA OVERHEAD STIRRERS
Our comprehensive laboratory product range is available in our web shop - www.thgeyer.com
Specifications 7.5 digital // 15 digital // 30 digital
5 l // 10 l // 20 l
Speed range: 0/50 ... 2000 rpm
// 0/50 ... 1000 rpm
//
0/50 ... 500 rpm
Max. torque: 7.5 Ncm // 15 Ncm // 30 Ncm
Display: LED
Chuck range: 0.5 ... 8 mm
Dimensions (W x D x H): 60 x 126 x 173 mm
Weight: 1.18 kg // 1.26 kg // 1.26 kg
Protection class
DIN EN 60529: IP 54
Power supply: 100 ... 240 V, 50/60 Hz
Stirring quantity max. (H2O):
Max. viscosity: 4000 mPas // 8000 mPas // 20000 mPas
Motor rating input/output: 32 W/22 W
Specifications 20 digital // 40 digital // 80 digital
Stirring quantity max. (H2O): 15 l // 25 l // 50 l
Max. viscosity: 10000 mPas // 30000 mPas //
60000 mPas
Motor rating input/output: 60 W/46 W
Speed range: 0/50 ... 2000 rpm
// 0/50 ... 1000 rpm
//
0/50 ... 500 rpm
Max. torque: 20 Ncm // 40 Ncm // 80 Ncm
Display: LED
Chuck range: 0.5 ... 8 mm
Dimensions (W x D x H): 70 x 147 x 193 mm
Weight: 1.56 kg // 1.72 kg // 1.72 kg
Protection class DIN EN 60529: IP 54
Power supply: 100 ... 240 V, 50/60 Hz
All prices are subject to statutory VAT. Technical changes and errors excepted. Our sales and delivery terms apply. Deliveries are free of charge with an order value of at least EUR 50.
www.thgeyer.com
Germany
Tel.: 0800 4393784
Fax: 0800 8443937
Poland
Tel.: +48 2242764-64
Other countries
Tel.: +49 7159 1637-823
Fax: +49 7159 18417
Scandinavia
Tel.: +45 4630 0030
Tel.: +46 8 6030200
AREVIPROTECT 75 LIQUID DISINFECTANTWe o�er AreviProtect 75 individually in a 5 l canister or
in a practical economy bundle.
The 7-piece bundle consists of:
1x AreviProtect 75 liquid disinfectant (2892.5000), based on 2-propanol (75 %) according to WHO recommendation, biocide
5x narrow neck bottles (7.696 090), HDPE, 500 ml, with 3 mm opening and PP hinged lid
1x funnel (7.692 023) for easy decanting
Description Art. no. PK
AreviProtect 75 2892.5000 5 l
AreviProtect 75 economy bundle with five bottles and funnel 2892.0001 5 l
Description Art. no. PK
CHEMSOLUTE® Surface disinfectant cleaner2891.1000 1 l
2891.5000 5 l
CHEMSOLUTE® SURFACE DISINFECTANT CLEANERGentle and fast-drying disinfectant and cleaning agent for sustainable and safe disinfection of all water-resistant surfaces.
It is highly e�ective against bacteria, fungi germs, limited virucide and complies with DGHM guidelines
(German Society for Hygiene and Microbiology). Biocide, BAuA Reg. No. N-25330NEW
CHEMSOLUTE® DISINFECT Produced from 2-propanol (min. 99.8 %), hydrogen peroxide (3 % v/v),
glycerol (min. 99.5 %) and ultrapure water according to the
BAuA general decree of 16.09.2020.
Description Art. no. PK
CHEMSOLUTE® Disinfect 2899.0250 250 ml
CHEMSOLUTE® Disinfect 2899.0500 500 ml
CHEMSOLUTE® Disinfect
in Eurodispenser bottle2899.0501 500 ml
CHEMSOLUTE® Disinfect 2899.1000 1 l
CHEMSOLUTE® Disinfect
in Eurodispenser bottle2899.1001 1 l
CHEMSOLUTE® Disinfect 2899.5000 5 l
CHEMSOLUTE® Disinfect 2899.9010 10 l
CHEMSOLUTE® DISINFECT 2 Produced from ethanol (min. 96.0 %), hydrogen peroxide (3 % v/v),
glycerol (min. 99.5 %) and ultrapure water according to the BAuA
general decree of 16.09.2020. Biocide, BAuA Reg. No. N-92100
Description Art. no. PK
CHEMSOLUTE® Disinfect 2 2895.0250 250 ml
CHEMSOLUTE® Disinfect 2
in Spray bottle2895.0255 250 ml
CHEMSOLUTE® Disinfect 2 2895.0500 500 ml
CHEMSOLUTE® Disinfect 2
in Spray bottle2895.1011 1 l
CHEMSOLUTE® Disinfect 2 2895.5000 5 l
+5 x
+1 x