LAB #8. Flywheel and Key Insert the flywheel key into the slot on the crankshaft then instert the...
7
LAB #8
-
Upload
malcolm-richardson -
Category
Documents
-
view
236 -
download
7
description
Flywheel Cont. Install plastic flywheel fins. Make sure it is in the correct position.
Transcript of LAB #8. Flywheel and Key Insert the flywheel key into the slot on the crankshaft then instert the...
LAB #8
Flywheel and Key
• Insert the flywheel key into the slot on the crankshaft then instert the flywheel.
Flywheel Cont.
• Install plastic flywheel fins. Make sure it is in the correct position.
Flywheel Cup and Nut
• Insert the flywheel cup.• Insert the flywheel Nut.• Torque to 60 FOOT pounds of torque.
Tighten the Flywheel Break
• Using a pair of pliers connect the spring from the flywheel break.
• Before install the armature CAREFULLY connect the wire on the back of the armature. Leaving the spark plug wire intact.
Ignition Coil• Using a 10mm socket insert the bolt holding
on the armature. We will torque it and set the gap when we put the second bolt in.