KX-TDE/NCP New Features/Functions Ver.4 (Edition-7) Panasonic System Networks CO.,LTD.

KX-TDE/NCPNew Features/Functions

Ver.4 (Edition-7)

Panasonic System Networks CO.,LTD.

NoteVoIP Expansion

- IP-TSW Speech Path New MPR Required- 64ch SIP Trunk- VoIP Channel Capacity- DECT-CS on NCP

Network Feature Enhancement - Message Waiting A/K is needed- Absent Message A/K is needed- Called party name display before answer A/K is needed- Call Waiting A/K is needed

Network ICD-Group (UCD is supported) A/K is neededImproved Conference Group FunctionImproved Conference FeaturesPaging to DECTCall-FWD CLIPImproved Centralized VM Function A/K is needed

“New Features/Functions - 1

The new features/functions are available from,- KX-NCP500/1000 MPR Ver.4.- KX-TDE100/200/600 MPR Ver.4.

NoteImproved Call-FWD N/A Function (Ringing after C-FWD) A/K is needed

Improved CA integrationAlternative call if VoIP call failsImprove VoIP (H.323) Connection

- Support Non-Fast Connect- H323-ID registration

Other Improvements- BSS Operation Programming

Reserve Bit Function

“New Features/Functions - 2

The new features/functions are available from,- KX-NCP500/1000 MPR Ver.4.- KX-TDE100/200/600 MPR Ver.4.

VoIP Expansion

- IP-TSW Speech Path- 64ch SIP Trunk- VoIP Channel Capacity- DECT-CS on NCP

“VoIP Expansion

PBX TDE600 TDE100/200 NCP1000 NCP500Version Ver.3 Ver.4 Ver.3 Ver.4 Ver.2 Ver.4 Ver.2 Ver.4IP-TSW Speech Path (ch) (*1)

49 113 49 113 49 113 49 113

SIP-Trunk (ch) 32 64 32 64 32 64 8 64

IP-PT

SIP Ext (ch)128 128 128 128 64 128

40 IP-PT

32 SIP128

IP-CS (Units) 16 16 16 16 8 16 8 16

Ver.4 Improvements

*2) H.323 IP-Trunk of NCP500 expands 32ch, same as NCP1000, TDE100/200/600.

Trunk/Extension Protocol Ver.4 TTL

IP-TrunkH.323 32ch (*2)

64 chSIP Trunk 64ch

IP-ExtensionIP-PT 128ch

128 chSIP-Ext. 128chIP-CS 128ch (16 units)

*1) New MPR card is needed.

MPR

“IP-TSW Speech Path (113 path) -1New MPR Card + Ver.3 = 49 path

New MPR Card + Ver.4 = 113 path

Legacy

CO

How to identify new H/W

Old MPR Card + Ver.4 = 49 path

New MPR card is needed.

DSP

IP CS

IP-Ext.

IP Trunk

“IP-TSW Speech Path (113 path) - 2

New H/W

Should be “XA”

How to identify new H/W

Old H/W

Ver 4.0

“64ch SIP Trunk -1

16ch x 2

8ch x 1

16ch x 2

16ch x 4

16ch x 4

16ch x 4

Only Software upgrade.

NCP1000 Ver.2

NCP500 Ver.2

TDE100/200/600

Ver 4.0

“64ch SIP Trunk -2

16ch x 2

Ver 2/3

64ch x 1

Ver.4 supports 64ch SIP Trunk.Supports 64ch by one contract/account

Ver 4.0

Ver.2/3 supports 32ch SIP Trunk.Two contracts/accounts (16ch + 16ch)

New PCMC Channel Attribute Programming Menu

“

Source -1 Source - 2 DSP Resource

Traditional (CO/Ext.) IP-Trunk (G711) 2 3Traditional (CO/Ext.) IP-Trunk (G729) 5 5Traditional (CO/Ext.) IP-Ext./IP-CS (G711) 1 2Traditional (CO/Ext.) IP-Ext./IP-CS (G729) 4 4IP-Ext.(G711) IP-Trunk (G711) 2 4IP-Ext.(G711) IP-Trunk (G729) 5 6IP-Ext.(G729) IP-Trunk (G711) 5 6IP-Ext.(G729) IP-Trunk (G729) 8 8IP-CS (G711) IP-Trunk (G711) 3 5IP-CS (G711) IP-Trunk (G729) 6 7IP-CS (G729) IP-Trunk (G711) 6 7IP-CS (G729) IP-Trunk (G729) 9 9IP-Ext./IP-CS (G711) IP-Ext./IP-CS (G711) 2 3IP-Ext./IP-CS (G729) IP-Ext./IP-CS (G711) 5 6IP-Ext./IP-CS (G729) IP-Ext./IP-CS (G729) 8 8

DSP ResourceDSP-4

DSP-16

DSP-64

16 64 256

DSP PowerVoIP Channel Capacity - 1

DSP-4/16DSP-64

“

Talking PartyNCP1000 NCP500

DSP4

DSP16

DSP64

DSP4

DSP16

DSP64

IP-Trunk

IP-PT

G711 G711 8 32 32 64 8 32 32 64G711 G729 2 12 32 42 2 12 32 42G729 G729 2 8 32 2 8 32

IP-Trunk

SIP

G711 G711 8 32 32 64 8 32 32 64G711 G729 2 12 32 42 2 12 32 42G729 G729 2 5 32 2 5 32

IP-Trunk

IP-CS

G711 G711 3 18 32 50 3 18 32 50G711 G729 2 9 32 35 2 9 32 35G729 G729 1 5 27 1 5 27

IP-Trunk Legacy Ext

G711 5 32 32 44 5 28 28

G729 2 12 32 44 2 12 28

[Restriction Key]DSP Power-1

Number of TDM-IP Channels

Number of Trunks

Number of Handsets.

DSP Power-2

The max. number of simultaneous telephone calls (NCP1000/500).

VoIP Channel Capacity - 2

H.323 TrunkSIP Trunk

“


DSP4

DSP16

DSP64

DSP4

DSP16

DSP64

Legacy-CO

IP-PT

G711 16 64 64 16 64 64

G729 4 16 64 4 16 64

Legacy-CO

SIP

G711 16 64 64 16 64 64

G729 4 16 64 4 16 64

Legacy-CO

IP-CS

G711 16 64 64 16 64 64

G729 4 16 64 4 16 64

Legacy-Ext

IP-PT

G711 16 44 44 16 28 28

G729 4 16 44 4 16 28

Legacy-Ext

SIP

G711 16 44 44 16 28 28

G729 4 16 44 4 16 28

Legacy-Ext

IP-CS

G711 16 44 44 16 28 28

G729 4 16 44 4 16 28


[Restriction Key]


DSP Power-1


Number of Trunks

Number of Handsets.

DSP Power-2

“


DSP4

DSP16

DSP64

DSP4

DSP16

DSP64

IP-CS

IP-PT

G711 G711 8 32 56 8 32 56G711 G729 3 12 42 3 12 42G729 G729 2 8 32 2 8 32

IP-CS

SIP

G711 G711 8 32 56 8 32 56G711 G729 3 12 42 3 12 42G729 G729 2 8 32 2 8 32

IP-CS

IP-CS

G711 G711 8 32 32 8 32 32G711 G729 3 12 32 3 12 32G729 G729 2 8 32 2 8 32


[Restriction Key]


DSP Power-1


Number of Trunks

Number of Handsets.

DSP Power-2

“

Talking PartyTDE100/200 TDE600

DSP4

DSP16

DSP64

DSP4

DSP16

DSP64

IP-Trunk

IP-PT

G711 G711 - 32 32 64 - 32 32 64G711 G729 - 12 32 42 - 12 32 42G729 G729 - 8 32 - 8 32

IP-Trunk

SIP

G711 G711 - 32 32 64 - 32 32 64G711 G729 - 12 32 42 - 12 32 42G729 G729 - 8 32 - 8 32

IP-Trunk

IP-CS

G711 G711 - 18 32 50 - 18 32 50G711 G729 - 9 32 35 - 9 32 35G729 G729 - 5 27 - 5 27

IP-Trunk Legacy Ext

G711 - 32 32 64 - 32 32 64

G729 - 12 32 50 - 12 32 50


[Restriction Key] H.323 TrunkSIP Trunk

The max. number of simultaneous telephone calls (TDE100/200/600).

DSP Power-1


Number of Trunks

Number of Handsets.

DSP Power-2

“


DSP4

DSP16

DSP64

DSP4

DSP16

DSP64

Legacy-CO

IP-PT

G711 - 64 113 - 64 113

G729 - 16 64 - 16 64

Legacy-CO

SIP

G711 - 64 113 - 64 113

G729 - 16 64 - 16 64

Legacy-CO

IP-CS

G711 - 64 113 - 64 113

G729 - 16 64 - 16 64

Legacy-Ext

IP-PT

G711 - 64 113 - 64 113

G729 - 16 64 - 16 64

Legacy-Ext

SIP

G711 - 64 113 - 64 113

G729 - 16 64 - 16 64

Legacy-Ext

IP-CS

G711 - 64 113 - 64 113

G729 - 16 64 - 16 64


[Restriction Key]


DSP Power-1


Number of Trunks

Number of Handsets.

DSP Power-2

“


DSP4

DSP16

DSP64

DSP4

DSP16

DSP64

IP-CS

IP-PT

G711 G711 - 32 56 - 32 56G711 G729 - 12 42 - 12 42G729 G729 - 8 32 - 8 32

IP-CS

SIP

G711 G711 - 32 56 - 32 56G711 G729 - 12 42 - 12 42G729 G729 - 8 32 - 8 32

IP-CS

IP-CS

G711 G711 - 32 56 - 32 56G711 G729 - 12 42 - 12 42G729 G729 - 8 32 - 8 32


[Restriction Key]


DSP Power-1


Number of Trunks

Number of Handsets.

DSP Power-2

“DECT-CS on NCP

CS factor

Ver.2 Ver.4

NCP500 NCP1000 NCP500 NCP1000

CSKX-TDA0158 2 2 4 3 5KX-TDA0141/0155 1 4 8 7 11KX-NCP0158 2 6 8 16 16

Max. CS factor 12 16 32 32

Max. PS 64 64 64 64

The max. number of CS/PS.

Network Feature Enhancement

“Network Feature EnhancementThe following features are newly supported from Ver.4

1 When calling extension in other PBX - Leave Message Waiting

- Absent Message Display - Called party name display before answer

2 When extension in other PBX is busy- Call Waiting- Busy Override- Call Back- Call Monitor- Leave Message Waiting

3 When extension in other PBX is DND - DND Override, DND tone and LCD

4 Incoming call from extension in other PBX - Ring tone (Single or Double) as extension call- Call Waiting- Call FWD / DND as extension call- Automatic answer as extension call- Extension call block by COS-COS

5 Incoming call to extension in other PBX - Directed Call Pickup

“

1- Ext.1001 calls Ext.2001 (Busy)2- Ext.1001 receive “Busy Tone”3- Press “Message Waiting” button on Ext.1001.4- The Message Waiting LED on Ext.2001 turns Red.- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.

The function works over, Extension Numbering & PBX Numbering.

Free/Busy

Message Waiting

1- Ext.1001 calls Ext.2001 (Free)2- Ext.2001 does not answer.3- Press “Message Waiting” button on Ext.1001.4- The Message Waiting LED on Ext.2001 turns Red.- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.

Ext.2001Call

Ext.1001

VoIP-Net

Network Feature Enhancement - 1A/K is needed

“Absent Message Display

1- Ext.1001 calls Ext.2001 (Absent Message “Go Home)2- “Go Home” is displayed on Ext.1001.

Absent Message“Go Home”


2. Send “Go Home”

Go Home

Ext.20011. Call

Ext.1001

VoIP-Net


“

Ext.1001Tanaka

Calling party name display before answer (Already Supported)

1- Ext.1001 (Tanaka) calls Ext.20012- Calling party name (Tanaka) is displayed on Ext.2001.

Ext.2001


2. Send “Tanaka”

Tanaka1001

1. Call

1001: Tanaka

Before Ver.4 External call

Ver.4 Internal call

VoIP-Net

Network Feature Enhancement - 3

A/K is needed

“

Ext.2001Honda

Called party name display before answer

1- Ext.1001 (Tanaka) calls Ext.20012- Calling party name (Tanaka) is displayed on Ext.2001.3- Called party name (Honda) is displayed on Ext.1001.


2. Send “Tanaka”

2001: Honda

1. CallExt.1001

3. Send “Honda”VoIP-Net


A/K is needed

1. Call

2- Ext.1001 LCD

1- Ext.1001 calls Ext.2001 (Busy)

“

3- Press “WAIT” button. 4- Call waiting on Ext.2001.

Ext.1001


Call Wait3. Press “WAIT”

2. Send “Busy” Info.

WAIT OVER C.BCK

2001: Busy

4.Call Wait

Ext.2001

Talking

Ext.2002

VoIP-Net

Call waiting : ON


Call waiting (Ext.2001) has to be “ON”.

A/K is needed

2- Ext.1001 LCD


“

3- Press “OVER” button. 4- We can override (Barge-in) the communication between Ext.2001

and 2002.

Ext.1001


Busy Override


WAIT OVER C.BCK

2001: Busy

Ext.2002

Talking

3. Press “OVER”

4. Override

1. CallExt.2001

VoIP-Net


2- Ext.1001 LCD


“

3- Press “5” button. 4- We can monitor the communication between Ext.2001 and 2002.


Call Monitor


WAIT OVER C.BCK

2001: Busy

Ext.2002

Talking

3. Press “5”

4. Monitor

Ext.2001Ext.10011. Call

VoIP-Net


“

Related program.

Ext.2001Busy

Related program for Call Monitor/Busy Override

Ext.2002

Talking

Monitor/Busy Override

Ext.1001

VoIP-Net


“

Related program.

Related program for Busy Override

Ext.2002

Talking

Monitor/Busy Override

Ext.2001Ext.1001

VoIP-Net


2- Ext.1001 LCD


“

3- Press “C-BCK” button. 4- When Ext.2001 became idle, Ext.1001 starts ring. (Call back starts)

Ext.1001


Ext.2001Busy

Call Back


WAIT OVER C.BCK

2001: Busy

3. Press “C.BAK”

Busy

1. Call

VoIP-Net


2- Ext.1001 LCD

1- Ext.1001 calls Ext.2001 (DND)

“

- “DND” Tone on Ext.1001

3- Press “OVER” button. 4- Ext.2001 starts ringing.

Ext.1001

The function works over, Extension Numbering & PBX code Numbering.

Ext.2001Busy

DND

2. Send “DND” Info.

OVER

2001: Do Not Disturb

DND

We can see the other end set to “DND”

3. Press “OVER”4. Ring1. Call

VoIP-Net


“

Ext.1001

Ext.2001Busy

DND

2. Send “DND” Info.

DND

3. Press “OVER”4. Ring

Related program.

1. Call

VoIP-Net


“

Ext.2001Busy

Ring tone (Single or Double) as extension call

2. Ring

1- Ext.1001 calls Ext.20012- Ext.2001 starts ringing.

Ver.4.0 : Internal call ring tone.Before Ver.4.0 : External call ring tone.


Ext.10011. Call

VoIP-Net


A/K is needed

“

Ext.2001Busy

Auto Answer

1- Ext.1001 calls Ext.20012- Ext.2001 answers the call automatically.

Ver.4.0 : PossibleBefore Ver. 4.0 : No possible

Internal call Auto Answer

= Enable


Ext.10011. Call

VoIP-Net


“

CO

Ext.2001Busy

Call-FWD setting on Ext.2001

PBX-2

We can set different C-FWD destination on Ext.2001 for external calls and other PBX call (Internal) calls.E.g. Internal call destination: Call from Ext.1001 and Ext.2002

External call destination: Call from external (Through PBX-1)

PBX-1

Ext.2002

Call

Call

Call


Ext.1001

VoIP-Net


A/K is needed

1- Ext.2002 calls Ext.20012- Ext.2001 starts ringing.3- Ext.1001 can pick up the call on Ext.2001

“

The function works over, Extension Numbering and PBX numbering.

Pick up call (Direct call pick up)

3. Pick up

Ext.2002

1.Call

Ext.20012. Ring

Ext.1001

How to program ?

VoIP-Net


“Pick up call (Direct call pick up): Extension Numbering

3. Pick up (Press a DSS (20**412001)

1.Call

Ext.20012. Ring

Ext.1001

20**412001

DSS

The target PBX numbering plan + *

Ext. No

Access code

VoIP-Net


*40 (Pick-up by group number) does not support A/K is needed

“Pick up call (Direct call pick up): PBX Numbering

3. Pick up (Press a DSS (72*411001)

1.Call

Ext.10012. Ring

Ext.1001

72*411001

DSS

Ext. No

Access code

PBX code

2

PBX code

1

TIE access + PBX number

VoIP-Net


A/K is needed

“

Ext.1001

Pick up call (Direct call pick up): CA Ver.3 (Future Plan)

Ext.2002

1.Call

Ext.20012. Ring

CA ServerCA Ver.3

Monitor

3. Pick up

VoIP-Net


A/K is needed

“Paging with Pick up call (Direct call pick up)

1.Call

Ext.2001

Ext.2002

PBX-1 PBX-2

Ext.1001

Ofiice-2

Audio port

1- Ext.2001 calls Ext.20022- On Ext.2002 (Voice Call is available Paging) ➔3- Ext.1001 can pick up (72*412002) the call on Ext.2002

2. Paging

3. Pick up

Ext.2002 is a PBX-2 extension.

VoIP-Net


Ofiice-1

A/K is needed

When Ext.2001 calls Ext.1001.Ver.4.0 : Ext.1001 starts ring.Before Ver.4.0 : Busy Tone

“

Ext.1001Improved Boss/Secretary function

Ext.2001

Boss(C-FWD to Ext.2001)

Secretary

Call Ext.1001


VoIP-Net


A/K is needed

“

Ext.2001COS-1

Internal call Block (COS-COS setting)

Ext.1001 (COS-1) calls Ext.2001 (COS-1): Not BlockedExt.1002 (COS-2) calls Ext.2001 (COS-1): Blocked

Ext.1002COS-2


Ext.1001COS-1

COS Information

Call Block

Call

VoIP-Net


A/K is needed

“Auto answer enable/disable by COS

Ext.2001

Ext.1001COS-2

Call

Auto Answer=ON

Ext.1002COS-3

Calling Ext. Ext.2001Ext.1001 (COS-2) Auto AnswerExt.1002 (COS-3) Ringing

COS Information

VoIP-Net


A/K is needed

“Internal call works this featureAuto answer enable/disable by COS

Ext.2001

Ext.2003COS-3

Ext.1001 Auto Answer=ON

Ext.1002

Calling Ext. Ext.2001Ext.2002 (COS-1) Auto AnswerExt.2003 (COS-3) RingingExt.1001 (COS-2) Auto AnswerExt.1002 (COS-3) Ringing

Call

VoIP-Net

Ext.2002COS-1

Network ICD-Group

“

Virtual PS Ext.1003

C-FWD = 2002

Before Ver.4.Network ICD-Group

Ext.2002

Ext.2001

Ext.1002

ICD-Group

ICD-GroupExt.1000

Ring

Ext.1001

Call

CO VoIP-Net

“

Virtual PS Ext.1003

C-FWD = 2002

Network ICD-Group

Ext.2002

Ext.2001

Ext.1002

ICD-Group

CO

ICD-GroupExt.1000

Ring (Already Supported)UCD (Ver.4)Hunt (Ver.4)

Ext.1001

Note: Automatic Log-out is not support for Virtual PS.

Call

Ver.4.

VoIP-Net

Improved Conference Group Function

“Conference Group mode programmingImproved Conference Group Function - 1

Ver.4: Flexible Program

Before Ver.4: System Program

“

Owner Two-way

N/A

Owner Two-way One way

N/A

Owner Two-way One way

Group-8: 8-Party Conference Mode

Group-2: Broadcast

Total32 Terminals

Conference Group mode programming (Ver.4)

Group-1: 8-Party Conference Mode

Improved Conference Group Function - 2

“

Owner

Joining external participants

Conference Group

If an owner wants to have a conference with only external participants. ➔ How to achieve ?

Before Ver.4

Conference Group

Before a conference is established, the external participant cannot join.

Owner


3. Join

“

- An owner establishes a group conference with physical connection D-PT or Softphone.

- An external participant joins the conference. - The owner presses the DSS button of the D-PT twice. - Press “Flash”/”Recall” key. ➔ Cuts the D-PT from the conference.

Advise solution

D-PT or SoftphoneAuto Answer = ON

Auto Answer mode works for conference group call on Ver.4.

Owner Conference Group

Ver.4

1. Call2. Conference is established.

4. Cuts the D-PT.

Joining external participantsImproved Conference Group Function - 4

“Reserve Bit Function (0A-6)

Default (Disable)

The above function does not work.

A D-PT (Auto Answer = Off) in conference group: An owner establishes a group conference➔ Compulsory D-PT Auto answer function Enable.

0A-6=Disable

0A-6=Enable

This is PSN plan


Auto Answer = OFF

Call


Improved Conference Features

“

CO

Subscriber-A

Subscriber-B

Improved Conference Features - 1

Ext.1001

1- Ext.1001 (Owner) holds three party conference.Subscriber- A, Subscriber-B

2- Ext.1001 on-hooks ➔ All connection disconnects.

Before Ver.4 Function

Customer wants to keep CO-to-CO connection.

Owner

Three party conference.

“Improved Conference Features - 2 Ver.4 New Option

CO-CO call LimitationEnable : Default (Before Ver. 4 New function)Disable : Option (Ver. 4 New function)

CO

“Improved Conference Features - 3Ver.4 Function (CO-CO call Limitation = Disable)

3. The PBX is keeping CO-to-CO connection.

1. Ext.1001 (Owner) holds three party conference.

CO

Subscriber-A

Subscriber-B

Ext.1001

Subscriber-A Ext.1001

Subscriber-B

2. Ext.1001 on-hooks.

NB: This operation does not work for conference group call.

Owner

Owner

“

CO

Subscriber-A

Ext.1002


Ext.1001

1- Ext.1001 (Owner) holds three party conference.Subscriber- A and Ext.1002.

2- Ext.1001 on-hooks ➔ The PBX keeps Subscriber- A and Ext.1002 connection.

Owner

Working scenario

“

CO

Subscriber-A

Ext.1002


Ext.1001

1- Ext.1001 (Owner) holds three party conference.Subscriber- A and Ext.1002.

2- Ext.1001 on-hooks ➔ The PBX keeps CO to Ext.1002 call.

Working scenario

Owner

VoIP-Net

“

Ext.1003


Ext.1001

1- Ext.1001 (Owner) holds three party conference.Ext.1002 and Ext.1003.

2- Ext.1001 on-hooks ➔ The PBX keeps Ext.1002 to Ext.1003 call.

Owner

Ext.1002

VoIP-Net

Working scenario

“

CO

Subscriber-A

Ext.1002

Subscriber-B


Ext.1001

1- Ext.1001 (Owner) holds four party conference.Subscriber- A, Subscriber-B and Ext.1002.

2- Ext.1001 on-hooks ➔ All connections disconnect.

Owner

Not working scenario

Paging to DECT(by using auto answer/conference)

“

Ext.1001

Auto-Answer=ON

Paging to DECT - 1

1.Call Ext.2001

Auto-answer function also works a conference group call.

3. Speaker automatically ON

1. Ext.1001 calls Ext.2001 (Auto-Answer=ON)2. The PBX calls Ext.20013. Ext.2001 speaker phone automatically ON.

Ext.2001

Auto-answer function for DECT

2. Call

“

1.Dial *321#

Ext.2003Ext.2001 Ext.2002

Auto-Answer=ON

1. Ext.1001 holds a conference (*321#)2. The PBX calls pre-programmed DECT-PS3. All DECT PS on the conference group automatically answer.

Speaker phone automatically “ON”.4. Ext.1001 user can page.

Paging to DECT - 2Auto-answer function for Conference Group

Conference Group No.1

3. Speaker automatically ON

Ext.1001

2. Call

4. Paging

“

Ext.1001

Ext.2003Ext.2001 Ext.2002

Auto-Answer=ON

Broadcasting modeMax. member

Max. talker

When paging starts,

Enable → 32 8 DECT-PS cannot speak at first.

Disable → 8 8 DECT-PS speak at first.

Conference Group No.1

- DECT user and SLT user can make conference group call as well as PT user.

- Hand over is supported for conference group call after DECT answers. (Ver. 3 does not support hand over for conference group call.)

- One DECT-PS needs one wireless channel.

Paging to DECT - 3

“Reserve Bit Function (0A-7)

Default (Disable)

0A-7=Disable

0A-7=Enable


Auto Answer = Off

Call

Paging to DECT - 4

This is PSN plan

The above function does not work.

A PS (Auto Answer = Off) in conference group: An owner establish a group conference➔ Compulsory PS Auto answer function Enable.

Call-FWD CLIP

“

ISDN

1- Ext.1000 calls Ext.10012- The call is re-routed to subscriber-A.3- CLIP? Ext.1000 CLIP or Ext.1001 CLIP?

Subscriber-A

Ext.1001CLIP 477-1001C-FWD toSubscriber-A

Call-FWD CLIP - 1 (Internal call)

The PBX sends 477-1001 as CLIP


CLIP ?

Calls

Ext.1000CLIP 477-1000

“

ISDN

1- Ext.1000 calls Ext.6000 (ICG-D)2- The call is re-routed to subscriber-A.3- CLIP? Ext.1000 CLIP or Ext.2000 CLIP?

Ext.1000CLIP 477-1000

Subscriber-A



CLIP ?

Dummy PS

Ext.2000CLIP 477-2000C-FWD toSubscriber-A

ICD-G 6000

Ext.1001

Calls

Call-FWD CLIP - 2 (Internal call)

“

ISDN

Subscriber-A

Ext.1000CLIP 477-1000C-FWD toSubscriber-B

Subscriber-B

1- Subscriber-A calls Ext.10002- The call is re-routed to subscriber-B3- CLIP? Subscriber-A CLIP or Ext.1000 CLIP?


The PBX sends Subscriber-A CLIP as CLIP

Call-FWD CLIP - 3 (External call)

“

ISDN

Subscriber-A

Dummy PS

Ext.2000CLIP 477-1000C-FWD toSubscriber-B

ICD-G 6000

Ext.1000CLIP 477-1000

Subscriber-B

1- Subscriber-A calls Ext.6000 (ICG-D)2- The call is re-routed to subscriber-B3- CLIP? Subscriber-A CLIP or Ext.2000 CLIP?


The PBX sends Subscriber-A CLIP as CLIP

Call-FWD CLIP - 4 (External call)

Improved Centralized VM Function

“

VoIP-Net

VM transfer over networkImproved Centralized VM function - 1

Ext.2002

Ext.2001

CO

2. Press “VTR + 2001+#

1. Call

Mail-BOX Ext. 101 1001 (PBX-1)102 2001 (PBX-2)103 2002 (PBX-2)

Ext.1001

1. Ext.1001 receives a call.2. Press the “VTR” button and dial remote extension number + #.3. The call goes to Ext.2001 mail Box.

PBX-1 PBX-2

Centralized VM

3. Go to Ext. 2001 Mail BOX

“

VoIP-Net


Ext.2002

Ext.2001

CO

2. Press “VTR + 1001 + #

1. Call


Ext.1001

1. Ext.2001 receives a call.2. Press the “VTR” button and dial remote extension number + #.3. The call goes to Ext.1001 mail Box.

PBX-1 PBX-2

Centralized VM


“

VoIP-Net


Ext.2002

Ext.2001

CO

2. Press “VTR + NDSS Button

1. Call


Ext.1001

1. Ext.2001 receives a call.2. Press the “VTR” button and Press the NDSS button for Ext.1001.3. The call goes to Ext.1001 mail Box.

PBX-1 PBX-2

Centralized VM


NDSS (Ext.1001)

“Transfer re-call DestinationImproved Centralized VM function - 4

Ext.2001

CO

1. Call

Mail-BOX Ext.101 1001 (PBX-1)102 1002 (PBX-1)103 2001 (PBX-2)

Ext.1002 C-FWD N/A to VMStep 4.

Before Ver.4 Transfer re-call to Ext.1001Ver.4 The call is re-routed to the Centralized VM

PBX-1 PBX-2

Centralized VMExt.10012. Transfer to Ext.1002

Un-screened3. Does not

answer

VoIP-Net

Improved Call-FWD N/A Function

“

CO

C-FWD N/A function before Ver.4Improved Call-FWD N/A Function - 1

Ext.2002

Ext.2001Subscriber-A

Call-FWD N/A toSubscriber-A

N/A Timer=15sec1. Call

3. Fwd to Subscriber-A

1. Ext.2002 calls Ext.20012. Ext.2001 starts ringing, 15sec.3. The call is forwarded to the subscriber-A ➔ Ext.2001 stops ringing.

2. Ring.

“

CO

C-FWD N/A function Ver.4

Ext.2002





1. Ext.2002 calls Ext.20012. Ext.2001 starts ringing, 15sec.3. The call is forwarded to the subscriber-A

Keep ring after FWD NA to COEnable ➔ Ext.2001 keeps ringing.Disable ➔ Ext.2001 stops ringing.

4. The subscriber-A and Ext.2001 can answer the call.

2. Ring.

Improved Call-FWD N/A Function - 2

A/K is needed

“

CO


Ext.2002





2. Ring.

CO Type Available

SIP/H.323 G/W YES

ISDN YES

Analogue

W/ Reverse YES

W/O Reverse NO

CPC Analogue Line NO

E1 YES

T1LCO NOGCO/DID/E&M YES

The Keep ring after FWD NA to CO Function is available on the following CO


“

CO


Ext.2002





2. Ring.

Ext.2001

1. Ext.2002 calls Ext.2001 ➔ DSS flashing.2. 15 sec ➔ DSS flashing.3. The call is forwarded to the Subscriber.4. The Subscriber does not answer ➔ DSS flashing.5. The Subscriber answers ➔ DSS turns “Red”.

This situation differs from the usual DSS display. Actually, Ext.2001 is not busy, other extension can call to Ext.2001.


If Ext.2001 DSS is assigned on other Ext.

“C-FWD N/A function Ver.4

Ext.2003

Ext.2001

Call-FWD N/AExt.2003


2. Ring.


Ext.2002

1. Ext.2002 calls Ext.20012. Ext.2001 starts ringing, 15sec.3. The call is forwarded to Ext.20034. Ext.2001 stops ringing.

3. Fwd to Ext.2003

If Ext.2001 is set C-FWD to Internal.

Improved CA integration

“Improved CA integration

When CA user logs to PBX (Ver.4), the PBX send “Manager” and “CA Chat Ability” information to CA.

CA

Client-1

1. Log-in

2. Data

Support from CA Ver.3

Disable un-necessary chat

Disable manager function from basic CA client

Send system data to CA

“Improved CA integration

CA

Display changed

Absent Message is not automatically changed.

Ver.4Absent status is not displayed from Ver.4.

PROG INFO RING MENUTHU 09:40 - *

PROG INFO RING MENU

10 JUN. 09:40 THU

Not in usedBefore Ver.4Absent status is displayed automatically by CA when PC is not used for pre programmed time.

Customer does not like this change.

Alternative call if VoIP call is fails(CO call ARS ➔ ➔ VoIP call Failed CO call)➔ ➔

NTT-CO

Dials0-00-44-111-2222

“Alternative call if VoIP call fails - 1+44 (0)111-2222

PBX-JapanBT CO

Telephone cost are high.

Standalone system

0-00-44-111-2222

International access code

Subscriber No.

CO access code

Country code

VoIP Net

“

NTT-CO

+44 (0)111-2222

TG-2

PBX-Japan

PBX-UK

BT COARS=ON

80201112222

01112222

Using remote PBX and VoIP and ARS function

Save cost !!!

Modify the dialled number by ARS table.

Dials0-00-44-111-2222

Alternative call if VoIP call fails - 2

“

NTT-CO

+44 (0)111-2222

TG-2

PBX-Japan

PBX-UK

BT COARS=ON

80201112222

If VoIP Network is Down ?

VoIP Net = Down



Dials0-00-44-111-2222


NTT-COARS=ON

Dials0-00-44-111-2222Checks Quick

Dialling table

YESRe-order Tone

NO

“

The call is VoIP call ?

80201112222

+44 (0)111-2222

TG-2

PBX-Japan

PBX-UK

BT CO

VoIP Net = DownNo-

response801-00-44-111-2222

A new function from Ver.4.



Modify the dialled number by Quick Dial table.


“Programming

ARS

Please do not select “On for any CO Access Operation”

Modify the dialled number by ARS

table.

Select “On for Local Access Operation”


“Programming

Quick Dial

Need to Check

CO access No.

Trunk access No.

Alternative call if VoIP call is failed - 6

“Reserve Bit Function (09-6)

Default (Disable)

The alternative call function does not work.

The alternative call function on Ver.4.

09-6=Disable

09-6=Enable

From TDE/NCP V4.


CO call ARS VoIP call Failed CO call➔ ➔ ➔ ➔The alternative call function works.

CO call ARS VoIP call Failed CO call➔ ➔ ➔ ➔

CO call ARS VoIP call Failed Re-order tone➔ ➔ ➔ ➔

Improve VoIP (H.323) Connection

“

VoIP Net

H323 IP-G/W

Call

Receiving call (a non-Fast connect mode call):Before Ver.4 : PBX does not accept the call.Ver.4 : PBX accepts the call.

Improve VoIP (H.323) Connection - 1Support Non-Fast Connect

Virtual H323 IP-G/W

Call

This improvement is adapted only for virtual gate way.(Not for LPR card gate way)

“

VoIP Net

H323 IP-G/W

Call

Making call:The TDE/NCP makes a call with fast connection mode.The other PBX replies with non fast connection mode.Before Ver.4 : PBX does not accept this reply, disconnect the call.Ver.4 : PBX accepts this reply


Virtual H323 IP-G/W

1. Call2. Reply


3. Connection?

“

VoIP Net

H323 IP-G/W

Call

Making call:The TDE/NCP makes a call with fast connection mode.The other PBX replies with non fast connection mode.Before Ver.4 : PBX does not accept this reply, disconnect the call.Ver.4 : Support H.245 Negotiation.


Virtual H323 IP-G/W

1. Call2. Reply


3. H.245 Negotiation

“Reserve Bit Function (06-0): H323-ID registration

Default (Disable)

06-0=Disable

06-0=Enable

LAN

The H323-ID registration is possible. (TDE Ver.2)The PBX send “Zonename” information to the Gate keeper. (Ver.4)The PBX send “Band Wide” information to the Gate keeper. (Ver.4)

Gate Keeper

The H323-ID registration is not possible.

RegistrationH323 G/W

Improve VoIP (H.323) Connection - 4

Other Improvements

“

Ver.4 (COS setting)

Other ImprovementsBSS Operation Programming

Before Ver.4 (System Program)

Ext.1001 (Operator: COS-1) Mainly un-screened call transfer.Ext.1002 (Worker: COS-2) Mainly screened call transfer.

PC Maintenance Console (PCMC) for Ver.4.

“PCMC for KX-TDE/NCP Ver.4.Please use U-PCMC Ver. 6.x.x.x KX-TDE600 Ver. 6.0.x.x or later

KX-NCP500/1000 Ver. 6.1.x.x or laterKX-TDE100/200 Ver. 6.2.x.x or later

Thank You Very MuchFor Your Attention

Modification History➔ Edition-2Page-11

Page 72 TVR ➔ VTRAdd Page 79Page 81 CS ➔ CA

Page 14

Page 34 Ext.2001 Ext.2002➔Page 39 72*412001 ➔ 72*412002 Page 58 CO-to-CO call CO to Ext.1002 call.➔Page 59 CO-to-CO call Ext.1002 to Ext.1003 call.➔Page106 4. Ext.2003 does not answer the call and the call is re-routed to VM.

➔ The call is re-routed to VM. ➔ Edition-4

Add Page 73.

５

➔ Edition-5Page-51 : (Old) - The owner presses the DSS button of the D-PT.

(New) - The owner presses the DSS button of the D-PT twice.- Press "Flash"/"Recall" key.

Page-55 : (Old) CO-CO call LimitationEnable : Default (Ver. 4 New function)Disable : Option (Before Ver. 4 New function)

(New) CO-CO call LimitationEnable : Default (Before Ver. 4 New function)Disable : Option (Ver. 4 New function)

Page-56: (Old) Ver.4 Function (CO-CO call Limitation = Enable)(New) Ver.4 Function (CO-CO call Limitation = Disable)

Page-72 : (Old) 2. Press “VTR + 2001 ➔ (New) 2. Press “VTR + 2001+#Page-74 : Add.Page-81 : (Old) If Ext.2001 is set C-FWD to External.

(New) If Ext.2001 is set C-FWD to Internal.

➔ Edition-6Page-2, 20-26,30-34, 36-39, 41-42. Add: A/K is needed

➔ Edition-7Page-40 Add: A/K is needed

KX-TDE/NCP New Features/Functions Ver.4 (Edition-7) Panasonic System Networks CO.,LTD.

Documents

Transcript of KX-TDE/NCP New Features/Functions Ver.4 (Edition-7) Panasonic System Networks CO.,LTD.