20080905 01 Tda Tde Ncp New Functions
-
Upload
maria-stoica -
Category
Documents
-
view
633 -
download
8
Transcript of 20080905 01 Tda Tde Ncp New Functions
KX-TDA/TDE/NPCNew Features/Functions
Panasonic Communications CO.,LTD.
Enhanced SD or Enhanced Key Note
DSS BLF for Mobile Extension Yes
Transfer re-call to VM-Group. No
Intercept for Call-FWD to CO. No
Busy-out Auto recovery function. No
Two CLIP on an Extension. No
Check-OUT not ready mode. No
System error activates an external relay. No
PRI CNIP No TDA30:N/A
“New Features/Functions from NPC/TDE600
DSS BLF for Mobile Extension
“DSS BLF for Mobile Extension -1
ISDN
1- Ext.1003 calls the boss extension.2- The boss answers the call by his mobile phone (Outside).3- The secretary wants to see the boss taking status.
Customer Request Function -1
Boss Mobile(Outside)
Ext.1003
Ext.1001Boss
Ext.1002Secretary
Mobile Integration
Boss Mobile
12
3
Mobile Integration
Ext.2001Dummy PSC-FWD to →
“DSS BLF for Mobile Extension -2
1- Ext.1003 calls the boss extension (Ext.1000)2- The boss answers the call by his mobile phone (Outside).3- The secretary see the boss taking status by DSS.Note : The Extension must be in 1st position in ICD-G
Ext.1001Boss
Ext.1002Secretary
ICD-G 1000
Ext. 1001
DSS Program
Enhanced SD or Enhanced Key is required to use this function.
New MPR
“DSS BLF for Mobile Extension -3
ISDN
1- The boss is out of his desk, and calls Ext.10032- The secretary wants to see the boss mobile phone status.
Boss Mobile(Outside)
Ext.1003
Ext.1001Boss
Ext.1002Secretary
Boss Mobile
1
2
Customer Request Function -2
“DSS BLF for Mobile Extension -4
ISDN
1- The boss is out of his desk, and calls an outside via DISA.2- The secretary wants to see the boss mobile phone status.
Boss Mobile(Outside)
Ext.1003
Ext.1001Boss
Ext.1002Secretary
Boss Mobile1
2
Customer Request Function -3
DISA
“DSS BLF for Mobile Extension -5
ISDN
Boss Mobile(CLIP:077-88061111)
Ext.1001Boss
Ext.1002Secretary
DISA
System Speed Dial (SSD) Entry
000: 0077-86061111: CLI Ext. 1001
DSS Program
DDI call to DISA
Ext. 1001
New MPR
Enhanced SD or Enhanced Key is required to use this function.
System Programming
Please set “Enable”Default: DisableOption: Enable
System Program (System Speed Dial)
“DSS BLF for Mobile Extension -6
“
Reserved bit 04-6Enable: The function is disabled.
(DSS Button does not go to “ON/OFF”Disable : The function is enabled. (Default)
If a customer does not like/use the new function, please set the reserved bit 04-6 to “Enable”
DSS BLF for Mobile Extension -7
“DSS BLF for Mobile Extension -8
Ext.1001Boss
Ext.1002Secretary
Final Configuration
ICD-G 1000
Ext.2001Dummy PSC-FWD to →
1000
DSS Program
New MPR
Ext. 1001
Dialing DSS Button
Monitoring DSS Button
DISA
Mobile Integration
Transfer re-call to VM-Group
“
TDA/TDE100/200: VM-Group Ext. number can not assigned. Physical extension number has to be.
TVM
Transfer
Transfer Re-call
But, Hunting function is not possible.
Transfer re-call to VM-Group -1
“
New MPR: VM-Group Ext. number can assigned
TVM
Transfer Re-call
Hunting function is possible.
Transfer
Transfer re-call to VM-Group -2
Intercept for Call-FWD to CO
“Intercept for Call-FWD to CO -1
Previous Function
ISDN
Ext.1001
Call-FWD to CO (A) IRNA to VM.
- Ext.1002 calls Ext.1001.- The call is re-routed to the subscriber A.- IRNA timer is ended but, the call is still on the subscriber A.But customer wants ………
IRNA to VM.
Call-FWD to CO
Subscriber A
“
New: Function
- Ext.1002 calls Ext.1001.- The call is re-routed to the subscriber A.- IRNA timer is ended, the call is re-routed to the VM.
IRNA Timer
IRNA Destination
Intercept for Call-FWD to CO -2
Ext.1001
“
ISDN
Call-FWD N/A to CO (A)N/A timer 15 secIRNA to VM.IRNA timer 35 sec
- Ext.1002 calls Ext.1001.- Ext.1001 rings.- N/A timer (15 Sec) is ended, the call is re-routed to the subscriber A. - IRNA timer (35 Sec) is ended, the call is re-routed to the VM.
New MPR
The following sequence is possible.
IRNA to VM.
Intercept for Call-FWD to CO -3
New: Function
Call-FWD to CO
Subscriber A
Ext.1001
“
ISDN
Call-FWD N/A to CO (A)N/A timer 15 secIRNA to VM.IRNA timer 35 sec
Call-FWD to CO
IRNA to VM.
Intercept for Call-FWD to CO -4 Calls
Calls
IRNA to VM
Ext.1001
15 sec Ring
Flow
20 sec Ring
IRNA timer
New: Function
New MPR
Subscriber A
Ext.1001
“
ISDN
Call-FWD to CO (A)IRNA to VM.
Subscriber A(Busy)
IRNA to VM.
Even if the subscriber is busy the function performs.
Busy Destination
Please program this
Intercept for Call-FWD to CO -5
New: Function
New MPRCall-FWD to CO
Ext.1001 (Boss)
“
ISDN
Call-FWD N/A to CO (A)N/A timer 15 secIRNA to Ext.1002IRNA timer 35 sec
Call-FWD to CO
IRNA to Ext.
Intercept for Call-FWD to CO -6 Calls
Calls
Ext.1002 (Secretary)
15 sec Ring
Flow
20 sec Ring
New: Function
New MPR
Ext.1001 (Boss) Ext.1002 (Secretary)
The IRNA destination does not need to be VM.
Subscriber A
Ext.1001
“
Analogue
Call-FWD to CO (A)IRNA to VM.
- If C-FWD CO line is analogue or E1, the function does not work. Because, the PBX can not detect status (Ringing/Busy) of the Subscriber.
- C-FWD CO line should be digital line (E.g. BRI, PRI)
Conditions
IRNA to VM.
Intercept for Call-FWD to CO -7
New MPRCall-FWD to CO
Subscriber A
“
Reserved bit 05-2Enable: The function is disabled.
(Previous Function)Disable : The function is enabled. (Default)
Intercept for Call-FWD to CO -8
If a customer does not like/use the new function, please set the reserved bit 05-2 to “Enable”
Auto Recovers from Busy Out
“Auto Recovers from Busy Out
Analogue
New Function- Ext.1001 seizes an analogue CO. - If, the analogue line loop current is not detected by NCP- The system sets this analogue CO to busy out status.- The manager extension recovers busy out status to normal status,
and, a CO call arrives at the TDE through the CO line or single CO line access recovers the CO line to normal status.
Previous Function
- Ext.1001 seizes an analogue CO. - If, the analogue line loop current is not detected by TDA/TDE- The system sets this analogue CO to busy out status.- Only the manager extensions recovers busy out status to normal
status.
Ext.1001
Two CLIP
“
ISDN-1
CILP : 477-1001
Current CLIP Situation
Two CLIP -1
ISDN-2Line No. 092-123-xxx
Line No. 092-477-xxx
Subscriber B
Subscriber A
Ext.1001
The PBX has two different ISDN providers.Line numbers are also different.An Extension can have only one CLIP.The ISDN-2 provider does not accept 477-1001.
ARS Call
Normal Call
“
ISDN-1
CILP-1 : 477-1001CILP-2 : 123-1001
- Normal call CLIP: 477-1001- ARS call CLIP: 123-1001
Background of the function
Customer request function
Two CLIP -2
ISDN-2Line No. 092-123-xxx
Line No. 092-477-xxx
Subscriber B
Subscriber A
ARS Call
Normal CallExt.1001
“
CLIP Programming (New MPR)
2nd CLIP (ARS calls)
1st CLIP (normal calls)
Two CLIP -3
“
Conditions
Add “X” or “x” at the 20th in the carrier name.
How to use 2nd CLIP
- We can not use the 2nd CLIP function together with ARS Itemized code function at the same time.
Two CLIP -4
“
ISDN
CILP-1 : 477-1001CILP-2 : 477-2001
- Business call CLIP: 477-1001- Home call CLIP: 477-2001
Application of the two CLIP
Customer request functionHome
Business Partners
Home Call(ARS Call)
Business CallExt.1001
Two CLIP -5
New MPR
The ISDN provider charges call amount by CLIP base.- CLIP 477-1001 →Business call charge- CLIP 477-1001 →Private call charge
Check-OUT Not-Ready Mode
“
Hotel Operator
Check-OUT Not-Ready Mode -1
TDA/TDE1: Hotel FeatureGuest Room
Cleaned UpOperation
Check-INNot-Ready
Check-OUTNot-Ready
Check-INOperation
Check-OUTReady
Check-INNot-Ready
Check-OUTOperation
Check-INOperation
Check-OUTOperation
Check-OUTReady
New FunctionPrevious Function
“
It not possible this operate at the guest extensions.
How to operate at the operator extension.
Check-IN
Cleaned UP (New Key)
Check-OUT
Check-IN → Check-IN Not-Ready (Guest in/DSS button red ON)Check-OUT→ Check-OUT Not-Ready (DSS button red flashing)
Press “Cleaned UP” button.Press a DSS button (red ON) →Ready (DSS button OFF)
New Steps
New Status
1001:Operator
PROG INFO Ring Menu
Check-OUT Not-Ready Mode -2
Cleaned UpOperation
Check-INNot-Ready
Check-OUTNot-Ready
Check-INOperation
Check-OUTOperation
Check-OUTReady
“
Reserved bit 04-4Enable: Check-OUT Not-Ready mode is disabled.
(Previous Function)Disable : Check-OUT Not-Ready mode is enabled. (Default)
Check-OUT Not-Ready Mode -3
If a customer does not like/use the new function, please set the reserved bit 04-4 to “Enable”
System error activates an external relay
“
New MPR
External Alarm System
OPB-3
External Relay No-1
ON
System error- AC Power down- Low RAM battery- SD Card remove- SD Card memory full- FAN stop- LPR Card remove- LPR Card stop- BRI/PRI link lost- SMDR disconnect- CTI link lost
E.g. A NCP1170 is broken →NCP Pick up this information → NCP activates an External relay No-1→ External Alarm System ON.
System error activates an external relay -1
“
Activated Relay port: The External Relay No-1 (Fixed)
System error activates an external relay -2
“
Reserved bit 05-5Enable: This function is enabled.Disable : This function is disabled. (Default)
If a customer needs system error by external alarm system (high reliability system), please set the reserved bit 05-5 to “Enable”
System error activates an external relay -3
PRI CNIP with the name of extension
PRI CNIP function can be performed by the reserved bit 04-7 (Enable) In SETUP message of PRI from PBX, we can send the caller name.
“PRI CNIP with the name of extension
If a customer wish to use this function, please set the reserved bit 04-7 to “Enable”
This function is available on PRI23 only. Not PRI30.
Enhanced SD or Enhanced Key Note
KX-TDA0192/0194 No -Simplified Voice Message (SVM) Function No -Moving From SVM to DISA (ESVM) No -High Quality OGM Record (ESVM) No -More than 1000 DDI Destination No -8 Digits VM Integration No -32 Tenant Support No -Check In/Out operation by CSTA No -Ext. Number and Verification Code No -TRS Function Improvement No -Music On Hold by DDI tenant No -Caller ID Notification VM Transfer No -Call Log on Busy Extension No -D-PT Disconnect/Re-connect status No -ICD group call log No -Automatic Call Waiting for Extension call No -KX-NT300 Series Support No -CTI Improvements No -Network Connection Improvements No -
“Features/Functions
KX-TDA0192/0194Enhanced Simplified Voice Message (ESVM) Card
KX-TDA0192/0194 (ESVM) - 1 Hardware
“
KX-TDA0194 (ESVM-4)KX-TDA0192 (ESVM-2)
KX-TDA0192/0194 (ESVM) - 2
KX-TDA0194 (ESVM-4)- 2 x 2-ch SVM + 4-ch MSG (DISA) Card.- Message Area : 2 x 250/Card (20/60/120min/Card (Selectable)) - DISA port : 4- Feature : SVM : 2 x 250 messages
(Mode) : MSG (DISA): : 64 OGM: SVM+ MSG (DISA) : 2 x 186 messages + 64 OGM
- CO to CO Call Circuits.
Hardware SpecificationKX-TDA0192 (ESVM-2)- 2-ch SVM + 2-ch MSG (DISA) Card.- Message Area : 250/Card (20/60/120min/Card (Selectable))- DISA port : 2- Feature : SVM : 250 messages
(Mode) : MSG (DISA): : 64 OGM: SVM+ MSG (DISA) : 186 messages + 64 OGM
- CO to CO Call Circuits.
“
Shared Recording Memory -1 (32MB)
TDA0192
2-Ch
System Data BusKX-TDA0192 Block Diagram
Ext.203Ext.202
SVM
2-ChExt.201
KX-TDA0192/0194 (ESVM) - 3 “
OGM-02
OGM-01
OGM-63
OGM-xx
OGM-64
DISA-02
DISA-01
MSG
2-Ch
Shared Recording Memory -1 (32MB)
Shared Recording Memory -2 (32MB)
Ext.206Ext.205
DISA-04
DISA-03
TDA0194
4-Ch
System Data BusKX-TDA0194 Block Diagram
OGM-02
OGM-01
OGM-63
OGM-xx
OGM-64
MSG
SVM-2
DISA-02
DISA-01
2-Ch
4-Ch
Ext.204
Ext.203Ext.202
SVM-1
2-ChExt.201
KX-TDA0192/0194 (ESVM) - 4 “
“KX-TDA0192/0194 (ESVM) - 5Combination
- Can only be mounted to the Sub-slot-3/OPB3, when we use the SVM function.- Install two KX-TDA0192/0194 (with SVM function) needs two OPB-3 cards.- OPB-3 Card software should be 4.000 or later.
When cards of different types are installed, the shortest recording time is used. E.g. if a KX-TDA0194 card and a KX-TDA0191 card are installed, the maximum recording time at default will be about 8 minutes, high quality OGM recording is not possible, Wav file transfer function is not possible.
OPB-3 Card
E.g. OPB-3 x 2
TDA0194
TDA0191
TDA0191
TDA0192
OPB-3 x 2
TDA0192
TDA0191
TDA0191
TDA0192
OPB-3 x 2
TDA0194
TDA0191
TDA0191
TDA0194
OPB-3 x 2
TDA0194
TDA0192
TDA0192
TDA0194
Any combination with KX-TDA0191, TDA0192 and TDA0194 is possible.
“
Can only be mounted to the Sub-slot-3/OPB3, when we use the SVM function.
KX-TDA0192/0194 (ESVM) - 6Installation/programming
Another ESVM card can work only MSG Feature
“
When we use the SVM feature, we have to mount an ESVM card to the Sub-slot-3/OPB3,
KX-TDA0192/0194 (ESVM) - 7Installation/programming
ESVM cards on the Slot-1 and 2 can work only MSG feature.
OPB-3
OPB-3 Features
SVM / MSG
MSG only
Slot-1
Slot-2
Slot-3
Slot-3 TDA0192/4
Slot-2 TDA0192/4
Slot-1 TDA0192/4
MSG only
System Data Bus
SVM Configuration - 1 (1 x KX-TDA0192)
TDA0192
MSG
OGM1-64
DISA 1-2
SVM
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 8 “
2-ch
2-ch
2-ch
System Data Bus
SVM Configuration - 2 (1 x KX-TDA0194)
TDA0194
MSG
SVM-2
OGM1-64
DISA 1-4
4-ch
SVM-1
Ext.204
Ext.202
Ext.203
Ext.201
KX-TDA0192/0194 (ESVM) - 8 “
2-ch
2-ch
4-ch
System Data Bus
TDA0192No-2
MSG
OGM1-64
DISA 1-2
SVM Configuration - 3 (2 x KX-TDA0192)
2-ch
SVM2-ch
Ext.204Ext.203
TDA0192No-1
MSG
OGM1-64
DISA 1-2
2-ch
SVM2-ch
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 9 “
Install two KX-TDA0192/0194 (with SVM function) needs two OPB-3 cards.
2-ch2-ch
System Data Bus
TDA0194
MSG
SVM-2
OGM1-64
DISA 1-4
SVM Configuration - 4 (1 x KX-TDA0192 + 1 x KX-TDA0194)
4-ch
SVM-1
Ext.206
Ext.204
Ext.205
Ext.203
TDA0192
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 10 “
2-ch
2-ch2-ch
Install two KX-TDA0192/0194 with SVM function needs two OPB-3 cards.
4-ch2-ch
System Data Bus
TDA0194No-2
MSG
SVM-2
OGM1-64
DISA 1-4
SVM Configuration - 5 (2 x KX-TDA0194)
2-ch
4-ch
SVM-12-ch
Ext.208
Ext.206
Ext.207
Ext.205
TDA0194No-1
MSG
SVM-2
OGM1-64
DISA 1-4
2-ch
4-ch
SVM-12-ch
Ext.204
Ext.202
Ext.203
Ext.201
KX-TDA0192/0194 (ESVM) - 11 “
Install two KX-TDA0192/0194 with SVM function needs two OPB-3 cards.
4-ch4-ch
TDA0192
System Data Bus
KX-TDA0192 Block Diagram (Message Block)KX-TDA0192/0194 (ESVM) - 12 “
Shared Recording Memory (20/60/120 min)
25024924867 - 247666564634 - 62321
Saved for OGM SVM
MSGSVM
Shared Recording Memory -2 (20/60/120 min)
System Data Bus
KX-TDA0194 Block Diagram (Message Block)
MSGSVM-1
KX-TDA0192/0194 (ESVM) - 13 “
Shared Recording Memory -1 (20/60/120 min)
25024924867 - 247666564634 - 62321
SVM-2
Saved for OGM
SVM
25024924867 - 247666564634 - 62321
Saved for OGM
SVM
TDA0194
SVM
System Data Bus
Feature (Mode) : SVM Mode
TDA0192
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 14 “
SVM:250 messagesRecording time 20/60/120 min2-ch
250249248
SVM
66656463321
Message Block67 - 2474 - 62Message Block
2-ch
Disable
OGM
System Data Bus
Feature (Mode) : MSG Mode
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 15 “
OGM:64 messagesRecording time 20/60/120 min2-ch
TDA0192
250249248
SVM
66656463
OGM
321
Message Block67 - 2474 - 62 No-usedMessage Block
2-ch
Disable
SVM+OGM
System Data Bus
Feature (Mode) : SVM + MSG Mode
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 16 “
TDA0192 OGM:64 messagesRecording time 20/60/120 min2-chSVM:186 messages, even if we record one OGM.Recording time: It is depending up on OGM recording time.
When we use the Moving From SVM to DISA Feature (MPR 5.0 New Feature) , we have to select this mode.
250249248
SVM
66656463
OGM
321
Message Block67 - 2474 - 62Message Block
2-ch
SVM
System Data Bus
Feature (Mode) : SVM Mode
TDA0194
MSG
OGM1-64
DISA 1-4
4-ch
SVM-1
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 17 “
Disable
SVM:2 x 250 messagesRecording time 2 x 20/60/120 min2-ch
25024924867 - 247666564634 - 62321
250249248
SVM
6665646332
Message Block-2
1
Message Block67 - 2474 - 62Message Block-1
SVM-2
Ext.204Ext.203
2-ch
4-ch
OGM
System Data Bus
Feature (Mode) : MSG Mode
MSG
SVM-2
OGM1-64
DISA 1-4
4-ch
SVM-1
Ext.204
Ext.202
Ext.203
Ext.201
KX-TDA0192/0194 (ESVM) - 18 “
OGM:64 messagesRecording time 20/60/120 min
2-ch
2-ch
Disable
TDA0194
25024924867 - 247666564634 - 62321
250249248
SVM
66656463
OGM
32
Message Block-2
1
Message Block67 - 2474 - 62 No-usedMessage Block-1
4-ch
SVM+MSG
System Data Bus
Feature (Mode) : SVM + MSG Mode
MSG
OGM1-64
DISA 1-4
4-ch
SVM-1
Ext.202Ext.201
KX-TDA0192/0194 (ESVM) - 19 “
TDA0194 OGM:64 messagesRecording time 20/60/120 min2-ch
When we use the Moving From SVM to DISA Feature (MPR 5.0 New Feature) , we have to select this mode.
SVM:2 x 186 messages, even if we record one OGM.Recording time: It is depending up on OGM recording time.SVM-2
Ext.204Ext.203
2-ch
25024924867 - 247666564634 - 62321
250249248
SVM
66656463
OGM
32
Message Block-2
1
Message Block67 - 2474 - 62Message Block-1
4-ch
“
Can only be installed to the Sub-slot-3/OPB3, when we use the SVM function.
KX-TDA0192/0194 (ESVM) - 20Installation/programming
Has to be “OUS” mode to change Features
Can not change Feature
“KX-TDA0192/0194 (ESVM) - 21Installation/programming Recording time
120 min (Low)60 min (Middle)20 min (High)
It is system programming. Can not assign card by card base.
SVM Floating Extension Number assignment.
“KX-TDA0192/0194 (ESVM) - 22
MSG Function Max Recording Time (min)
TDA0192+TDA0192(4ch)
Disable 240 (2x120)
Enable 240 - 2 x OGM recording time
TDA0194+TDA0194(8ch)
Disable 480 (4x120)
Enable 480 - 4 x OGM recording time
TDA0192(2ch)
Disable 120Enable 120 - OGM recording time
TDA0194(4ch)
Disable 240 (2x120)
Enable 240 - 2 x OGM recording time
SVM Mailbox Size and Max. Recording Time
TDA0192+TDA0194(6ch)
Disable 360 (3x120)Enable 360 - 3 x OGM recording time
SVM Mailbox
500 (2x250)
372 (2x186)
1000 (2x2x250)
744 (2x2x186)
250186
500 (2x250)
372 (2x186)
750 (250+2x250)558 (186+2x186)
Recording time is selected to 120 min (Low)
Simplified Voice Message (SVM) Function
- An extension can have only one mail box.- PT/SLT/PS/IP-PT/IP-Softphone can be assigned its own
message box. (But, Not ISDN/SIP extension)- The following features are not supported.
- Recording SVM personal greeting from external terminal.- LCS, 2-Way recording.- Call Redirection.- E-mail Integration.- Save personal greetings and recorded messages.
- A voice mail system can connect together with SVM card.- Greeting message can not be used as ICD-Group time table
OGM.
SVM Function - 1 “
SVM Function Conditions
Max.250 (186) Messages
SVM Card
SVM Block DiagramTDA Data Bus
“
SVM2-Ch
Day Mode Greeting
Ext.201
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
Day Mode Greeting
Ext.202
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
Day Mode Greeting
Ext.203
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
Day Mode Greeting
Ext.204
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
SVM Function - 2
Max.250 (186) MessagesMax.250 (186) Messages
Day Mode Greeting
Ext.202
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
SVM card
SVM Block Diagram
Day Mode Greeting
Ext.203
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
SVM-2
TDA Data Bus
“
2-Ch
Day Mode Greeting
Ext.201
Normal Greeting
Night Mode Greeting
Lunch Mode Greeting
Break Mode Greeting
Message Box
Message Box
Message Box
Message Box-1
SVM-12-Ch
SVM Function - 3
“
Can only be mounted to the Sub-slot-3/OPB3, when we use the SVM function.
Installation/programming
Assign SVM resource
Assign SVM log Max.100
SVM Function - 4
TDA0192A=SVM
TDA0194A=SVM-1B=SVM-2
Card 1
Card 2
Normal Greeting MessageRecord Off-Hook *381 C.tone MessageReplay Off-Hook *382Clear Off-Hook *380
Greeting Message for Each Time ModeRecord Off-Hook *388 0 (Day) 1 C.tone Message
1 (Night)2 (Lunch)3 (Break)
Replay Off-Hook *388 0 (Day) 21 (Night)2 (Lunch)3 (Break)
Clear Off-Hook *388 0 (Day) 01 (Night)2 (Lunch)3 (Break)
Maintenance Greeting Message
“SVM Function - 5
FDW to
IRNA to
Personal Greetings
Message Box
Ext.201
Personal Greetings
Message Box
Ext.202ISDN
Outside
SVM
FDW to
IRNA to
Ext.201
Ext.202
Another Extension
- Accessing your message box from another extension
- Recording personal greeting message- Recording greeting message for each time mode- Redirecting your calls to your message box- Leaving voice messages- Listening to voice messages left by callers- Accessing message box from outside.
“SVM Function - 6
SVM
ICD-Group
Voice Mail service (External caller)
ISDN
DDI to SVM
DDI to
SVM
SVMVoice Message
OverflowDDI to
Not Possible
Personal Greeting“This is “Sales”
Voice Message
IRNA/FWD
Personal Greeting“This is “Tanaka”
“SVM Function - 7
By using call forwarding function*71 0 (Both Call) 2 (All Call) SVM Floating No. #
1 (Outside) 3 (Busy)2 (Intercom) 4 (No Answer)
5 (Busy/No Answer) 0 (Cancel)
Redirecting your call to your message box
By using IRNA function
Assign SVM Floating Ext. No.
“SVM Function - 8
*71 0 (Both Call) 2 (All Call) SVM Floating No. #Assign SVM Floating Extension Number.
“
TDA0194-2
TDA Data Bus
4-Ch
Ext.204
Message Box
Message Box-1
SVM-2
Ext.203
Message Box
Message Box-1
SVM-1
2-Ch2-Ch
TDA0194-1 4-Ch
Ext.202
Message Box
Message Box-1
SVM-2
Ext.201
Message Box
Message Box-1
SVM-1
2-Ch2-Ch
SVM Floating Ext. NumberExt.201/202 → 591Ext.203/204 → 592
Ext.592Ext.591
SVM Function - 9
Off-Hook *383 C.tone Message: PT/SLT/PSOff-Hook *702 C.tone Message: PT/SLT/PSOff-Hook Message Button C.tone Message: PT/PSMessage Button (SVM Call log) Off-Hook
To listen to voice messages (First In/Last Out)
While you hear the recorded message. (PT/SLT/PS)3 + 1
To clear voice messages
1: To play back the voice message form the beginning w/o C-tone.2: To go to the next voice message3 and 1: To clear the voice message.4: To call back to the caller (External and Internal)5: To go back the previous voice message#6 and Ext. No.: To leave a voice message directly another Ext.#8: To play back your greeting message and recorded voice message#9: To end the call#*: To play back the voice message from the beginning w/ C-tone.
Additional operation while you hear the recorded message.
“SVM Function - 10
Accessing your SVM from another extensions.Off-Hook *47 Your Ext. No. PIN No. C.tone (Record) *381 C.tone Message(Replay) *382(Clear) *380
(Record) *388 0 (Day) 1 C.tone Message1 (Night)2 (Lunch)3 (Break)
(Replay) *388 0 (Day) 21 (Night)2 (Lunch)3 (Break)
(Clear) *388 0 (Day) 01 (Night)2 (Lunch)3 (Break)
Listening to voice messagesOff-Hook *47 Your Ext. No. PIN No. C.tone * 383
Normal Greeting
Time mode Greeting
“SVM Function -11
Ext. 201
Ext. 201
Voice Mail Service (Internal caller)
*38 # 6 Ext. Number
“Today’s meeting is canceled.”
ISDN
Remote Voice Mail Access Service
DDI call to an Ext.
“Tanaka’s voice message box”
“Tanaka’s voice message box”
*47
*38 You can perform all operations.
Ext. Number + Ext.PIN
Tone-3
C-Tone
NB:
“Remote VM Access Service” (5.3.3 SVM) must be set to ‘Enable’ before using this function.
FWD
“SVM Function - 12
Ext.203
Ext.204
Ext.201
Ext.202
SVM-1
ISDN
Remote Voice Mail Access Service
*47
*38 You can perform all operations.
201 or 202 or 203 or 204 + Ext.PIN
Tone-3
C-Tone
DDI call to Ext. 201
“Tanaka’s voice message box”
NB: This feature is only available for Extension Mailboxes on the same SVM card.
“SVM Function - 13
Ext.203 SVM-2
Ext.204
ISDN
Ext.201
Ext.202
SVM-1
*47
Tone-3
DDI call to Ext. 201
“Tanaka’s voice message box”
203/204 + Ext.PINNot PossibleAnother DDI call to Ext.203 (SVM-2) is needed
NB: This feature is only available for Extension Mailboxes on the same SVM card..
Remote Voice Mail Access Service
“SVM Function - 14
ICD-Group Voice Mail Box
ISDN
DDI call to Ext.601
Time Table of Ext.601 Starts
Overflow
OGM Message (TDA019x)
“This is Yamada …..”
OGM Message from SVM
Ext.601
Time-Table
OGMTDA019x
SVM
“SVM Function - 15
How to create an ICD-Group Voice Mail Box1- Create a dummy PS extension.
2- Assign this extension at head of ICD-Group Member
Important
If this extension is not programmed at head of ICD-Group Member, SVM function does not work.
“
Create
Does not work
SVM Function - 16
3- Record a message to SVM of Ext.290.4- Redirecting call to SVM
- *7141 + 601 + SVM Floating Ext. No. (591)SVM function does not work on this programming (*7141+601+290).- Assign SVM Floating Ext. No. (591) as Overflow Ext.
“
The following programming does not work with the SVM function.Does not work
SVM Function - 17
How to notify of a voice message on Ext.290.- Assign Ext. 290 Message wait button on Ext.2001.
PROG + DSS button + 40 + 290 (Dummy Ext. No.).
How to listen to a voice message on Ext.290.- Assign the following command on DSS on Ext.2001.
*47 + 290 (Dummy Ext. No.) + Ext.290 PIN + *383
Final Image Ext.601
Dummy PS Extension
Ext.290
Ext.2001MW290
*383
Ext.2002
“SVM Function - 18
Ext.201 ring Ext.201 ring Ext.201 ring Ext.201 ring Ext.201 ring Ext.201 ring
Time Mode
Call to Ext. 201, What happens?
Normal-G Normal-G Normal-G Normal-G Normal-G Normal-G
Day-G Break-G Day-G Lunch-G Day-G Night-G
Day Break Day Lunch Day Night
Normal-G Break-G Normal-G Lunch-G Normal-G Night-G
No-Greeting
Case-1 Case-4
Normal
NightLunch
Break
Greeting on Ext. 201
Day
Case-3
Normal
NightLunch
Break
Case-2
Normal
Case-5
NightLunch
Break
Ext.201 ring Break-G Ext.201 ring Lunch-G Ext.201 ring Night-G
Case-1
Case-2
Case-3
Case-4
Case-5
How to work Normal Greeting and Time mode Greeting.
“SVM Function - 19
DDIIntercom FWD to SVM Ext.201 SVM
Ext.201
FWD to SVM Ext.201 Rings
FWD to SVMBusy Tone
Full
Ext.201
Ext.201
How to work SVM (incoming call from digital line/Intercom)
DDIIntercom
DDIIntercom
FWD to SVM
Ext.201DDI
Intercom 2ch
Occupied Busy Tone
Accessing
N/A to SVMExt.201 Rings
Ext.201DDI
Intercom Accessing
“SVM Function - 20
DDI to Ext.201
Condition-1
Ext.202
Condition Result
Ext.201 RingsExt.202 RingsExt.201 SVM
SVM=YESIRNA=No
FWD to 202 SVM=YES FWD to SVM Ext.201 Rings
Ext.202 RingsExt.201 SVM
SVM=YESIRNA=SVM
FWD to 202 SVM=YES FWD to SVM Ext.201 RingsExt.201 SVM
How to work SVM with Multi-Call FWD.
Ext.202 Rings
SVM=YESIRNA=SVM
N/A to 202 SVM=YES No-Answer orN/A to SVM
SVM=YESIRNA=SVM
FWD to 202 SVM=YES No-Answer or N/A to SVM
SVM=YESIRNA=No
FWD to 202 SVM=YES No-Answer or N/A to SVM
SVM=YESIRNA=No
N/A to 202 SVM=YES No-Answer orN/A to SVM
Ext.201 RingsExt.202 Rings
Ext. N/A Timer < System IRNA Timer
“
(Incoming call from digital line)
SVM Function - 21
SVM=NoIRNA=SVM
FWD to 202 SVM=YES FWD to SVM Ext.201 Rings
SVM=YESSVM=Full
FWD to 202 SVM=YES FWD to SVM Ext.201 Rings
DDI to Ext.201
Condition-1
Ext.202
Condition Result
How to work SVM with Multi-Call FWD.
“
(Incoming call from digital line)
SVM Function - 22
Analogue FWD to SVM Ext.201 SVM
Ext.201
FWD to SVM
Ext.201 Rings
FWD to SVM
Full
Ext.201
Ext.201
How to work SVM (incoming call from analogue line)
Analogue
Analogue
FWD to SVM
Ext.201
Analogue 2ch Occupied
Accessing
N/A to SVM
Ext.201
AnalogueAccessing
“
Ext.201 Rings
Ext.201 Rings
Ext.201 Rings
SVM Function - 23
Analogue Ext.201
Condition-1
Ext.202
Condition Result
Ext.201 RingsExt.202 RingsExt.201 SVM
SVM=YESIRNA=No
FWD to 202 SVM=YES FWD to SVM Ext.201 Rings
Ext.202 RingsExt.201 SVM
SVM=YESIRNA=YES
FWD to 202 SVM=YES FWD to SVM Ext.201 RingsExt.201 SVM
How to work SVM with Multi-Call FWD.
Ext.202 Rings
SVM=YESIRNA=SVM
N/A to 202 SVM=YES No-Answer orN/A to SVM
SVM=YESIRNA=SVM
FWD to 202 SVM=YES No-Answer or N/A to SVM
SVM=YESIRNA=No
FWD to 202 SVM=YES No-Answer or N/A to SVM
SVM=YESIRNA=No
N/A to 202 SVM=YES No-Answer orN/A to SVM
Ext.201 RingsExt.202 Rings
Ext. N/A Timer < System IRNA Timer
“
(Incoming call from analogue line)
SVM Function - 24
SVM=NoIRNA=SVM
FWD to 202 SVM=YES FWD to SVM Ext.201 Rings
SVM=YESSVM=Full
FWD to 202 SVM=YES FWD to SVM Ext.201 Rings
Condition-1 Condition Result
How to work SVM with Multi-Call FWD.
“
(Incoming call from analogue line)
Analogue Ext.201 Ext.202
SVM Function - 25
Message waiting function Yes Yes
Features comparison to TVM
“
Callback by call log Yes Yes
Features SVM + D-PT TVM+D-PT
Device Notification
Relay/Repeat/Delete left message Yes Yes
2-Way transferCustom service
Voice guidance
No YesPA-VMA integration
Transfer Ext. greetings from PC No NoSave Ext. greeting to PC No No
Busy greeting.
No Yes
Personal greeting record by handset Yes Yes
2-way recording
VM Memu
No Yes
No YesNo Yes
No Yes
No YesNo Yes
E-mail integration No Yes
LCS No Yes
SVM Function - 26
Moving From SVM to DISAESVM Function
Dialling 0/9 OGM-1Greeting
“Moving From SVM to DISA - 1
When a call is answered by SVM but the caller wants to call another extension instead of leaving a message, it is possible to access DISA (DISA OGM 1 will be played) by dialing the Operator Call feature number. This allows the caller to call another extension via DISA or access the DISA AA service.
SVM + MSGSVM + MSG
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
ESVMNo-1
2-chMSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
ESVMNo-1
2-ch
Switch over
2-ch2-ch
“
The MSG feature for the ESVM card to which the SVM mailbox belongs must be enabled.
SVM + MSGSVM + MSG
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.204Ext.203
ESVMNo-2
2-chMSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
ESVMNo-1
2-ch
TDA Data Bus
The Moving From SVM to DISA feature works only on the SVM + MSG mode.
Switch overSwitch over
NB: This feature is only available for SVM Mailboxes and MSG (DISA) on the same SVM card..
2-ch2-ch
Moving From SVM to DISA -2
“
SVM + MSG
MSG
OGM1-64
DISA 1-4
4-ch
SVM-2
Ext.208Ext.207
ESVMNo-2
2-ch
TDA Data Bus
Switch over
SVM-1
Ext.206Ext.205
2-ch
Switch over
SVM + MSG
MSG
OGM1-64
DISA 1-4
4-ch
SVM-2
Ext.204Ext.203
ESVMNo-1
2-ch
Switch over
SVM-1
Ext.202Ext.201
2-ch
Switch over
4-ch4-ch
Moving From SVM to DISA -3
“
MSG ModeSVM Mode
MSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.20 4Ext.20 3
ESVMNo-2
2-chMSG
OGM1-64
DISA 1-2
2-ch
SVM
Ext.202Ext.201
ESVMNo-1
2-ch
TDA Data Bus
The Moving From SVM to DISA feature works only on the SVM + MSG mode.The following configuration does not work the Moving From SVM to DISA feature.
Dialling 0/9 OGM-1Greeting
Does not switch over between two cards
Does not work
Moving From SVM to DISA -4
“
After SVM recording started, the TDA disconnects the line when the TDA receives a DTMF signal.
Idle SVM Greeting OGM-1
Dial 0/9Incoming Call
Normal flow.
Idle SVM Greeting OGM-1
Dial 0/9Incoming Call
Stat SVM recording
SVM recording
NB: The following flow is not possible.
Idle SVM Greeting Disconnects the line
DTMFIncoming Call Stat SVM recording
SVM recording
Moving From SVM to DISA -5
High Quality OGM RecordIt is possible to record music when using an ESVM
card in High Recording Quality mode.It is possible to transfer WAV file to ESVM.
ESVM
TDA Data Bus
High Quality OGM Record -1 “
25024924867 - 247666564634 - 62321
25024924867 - 247666564634 - 62321
High Quality OGM(OGM01–64)
MSGSVM-1
SVM-2
SVMSaved for OGM
Not Support
Not Support
High Recording Quality mode
“
OGM recoding quality setting. Recording time 120 min (Low)60 min (Middle)20 min (High)
It is system programming. Can not assign card by card base.
Installation/programmingHigh Quality OGM Record -2
“
The following programming is possible.
MSGMSGESVMNo-2
MSG
OGM1-64
2-chSVM
ESVMNo-1
2-ch
TDA Data Bus
MSG
OGM1-64
2-chSVM
2-ch
SVM + MSGSVMESVMNo-4
MSG
OGM1-64
2-chSVM
Ext.202
ESVMNo-3
2-chMSG
OGM1-64
2-chSVM
Low
2-ch
Ext.201
High
High
Low
Programming
High
High Quality OGM Record -3
ESVM
TDA Data Bus
“
25024924867 - 247666564634 - 62321
25024924867 - 247666564634 - 62321
High Quality OGM(OGM01–64)
High Recording Quality mode
Wav Format8KHz16bitMonaural
High Quality OGM Record -4
“
2- Go to “Utility”- “Message File Transfer” PC to PBX
Recording1- Set all OPB-3s which has DISA to “OUS”
5- Select a wav file.
6- Click
7- Select OGM Message Number
8- Click
4- Click
Wav Format8KHz16bitMonaural
3- Select “All”
High Quality OGM Record -5
“
File transfer to PBX
9- Click
10- Click
Finish11- Set OPB-3 “INS”
High Quality OGM Record -6
“
OGM output level (OGM recoding level) OGM output level (Wav file recording) may influence DISA tone detection sensitivity. If OGM has high output level then the DISA tone detection threshold level may deteriorate. If a customer uses DISA function with OGM that is recorded from Wav file, please check the DISA tone detection sensitivity / level before use. If DISA tone detection does not work correctly, please reduce the level by using the application detailed below. (Remove High level WAV file and replace with modified one).
DISA OGM Memory
Handset recording
External Audio Input
AGC
Wav file transfer
Auto Gain Control
NO Gain Control
High Quality OGM Record -7
“
Wav file Modification SoftwarePCC uses the following audio modification (→xxx.wav, adjust audio level) software.- Sony "Sound Forge". (Not Free software)
You may download a free trial from the following website:http://www.sonycreativesoftware.com/products/soundforgefamily.asp
Free software: “Eufony” http://www.softe.net/It's free use for wave files less than 1 minute. Above 1 minute we need to pay. (Convert, Spilt, Merge are possible)
“Sound recorder” (Windows optional software) :It is possible to use for conversion audio modification (→xxx.wav, reduce audio level) software. But PCC experience on TVM is conversion quality is not good some audio data.
High Quality OGM Record -8
More than 1000 DDI Destination1000 DDI Table (not matched) →TIE Table
“More than 1000 DDI destinations - 1Previous Function
2- Search DDI table
1- Incoming DDI number modification
Not matched
3- Final Destination
1000 DDI Tables
Ext.2xxx
Ext.4xxx
Ext.1xxx
“
QSIGVoIP/ISDN
Branch-2
Main-Office
Ext.3xxx
More than 1000 DDI destinations - 2
Branch-3
Branch-1
ISDN
DDI Ext.1000 10001xxx 1xxx2000 20002xxx 2xxx3000 30003xxx 3xxx4000 40004xxx 4xxx
DDI TableDDI Ext.1000 10001xxx 1xxx2000 20002xxx 2xxx3000 30003xxx 3xxx4000 40004xxx 4xxx
1000 DDI Tables: How to Program?
“More than 1000 DDI destinations - 3New Function
2- Search DDI table
1- Incoming DDI number modification
4- Final Destination
Not matched
3- Search TIE table Not matched
1000 DDI Tables (no changed)
8 Digits VM Integration
“8 Digits VM Integration - 1
VM Connection
Previous Function
5 digits extension numberingExt.20001
TVM Ver.2.0 support 5 digits mailbox.
TVM Ver.2.0
VM integration does not support 5 digits.
“8 Digits VM Integration - 2
VM Connection
New Function
5 digits extension numberingExt.20001
TVM Ver.2.1 support 8 digits mailbox/VM integration.
TVM Ver.2.1
New MPR supports 8 digits VM integration
Mailbox Extension20001 2000120002 2000220003 2000320004 20004
New MPR
DLCDHLC
Ver.5.002
DLC/DHLC Card software should be 5.002 or later.
Ext.20001
C-FWD 500
Ext.20001
“8 Digits VM Integration - 3
TVM Ver.2.1
QSIGVoIP/ISDN
Branch PBXPBX code:11
Centralized VM with PBX code
Ext.500
Branch PBXPBX code:12
Branch PBXPBX code:13
Main PBXPBX code:10
Mailbox Extension20001 2000171120001 7112000171220001 7122000171320001 71320001
MPR 5.0
Ext.20001C-FWD 7+10+500 C-FWD 7+10+500
Ext.20001
New Function
32 Tenant Support
“32 Tenant - 1
32 Tenants
32 Tenants (Time Table)
“32 Tenant - 2 (System Speed Dial)
- 1000 x 32 Tenants (EMEC card is needed.)
32 Tenants
- 1000 x 8 Tenants (EMEC card is needed.)
32 Tenants
8 Tenants
Check In/Out operation by CSTA
“Check In/Out operation by CSTA - 1
Ext.2001
Check In Ext.2001
Ext.2001 Check In CSTA command.
USB/LAN
FOS (CSTA Application)
- Clear Call Budget- Station Un-lock
Check In Operation
Check In Mode
New MPR
NB: The TAPI I/F does not support this operation.
“
Ext.2001
TVM Ver.2.0
Mailbox for Ext.2001
Check Out Ext.2001
Send message delete command.
Ext.2001 Check Out CSTA command.
USB/LAN
FOS (CSTA Application)
Check In/Out operation by CSTA - 2
Check Out Operation
Check Out Mode
- Station lock- Clear Extension data
Timed reminder.Wake up.Last Number RedialSaved Number Redial Call LOG
NB: The TAPI I/F does not support this operation.
New MPR
“
Ext.2001
Delete Ext.2001 message from SVM
Check out Ext.2001
USB/LAN
FOS (CSTA Application)
Ext.2001 Check Out CSTA command.
Check In/Out operation by CSTA - 3
Check Out Operation
Check Out Mode
- Station lock- Clear Extension data
Timed reminder.Wake up.Last Number RedialSaved Number Redial Call LOG
SVM for Ext.2001
NB: The TAPI I/F does not support this operation.
New MPR
“
CSTA Feature Specification document will be updated soon.
Check In/Out operation by CSTA - 4
Feature Description Related CSTA Features
Room Status Control
An extension designated as the hotel operator can set the check-in status of rooms remotely.
EscapeService & PrivateEvent guestCheckIn-Request guestCheckOut-Request checkedIn-Event checkedOut-Event GetSystemData-Request -guestCheckStatus GetSystemDataLinkedReply - guestCheckStatus
Call Billing for Guest Room
Charges for calls from guest rooms can be logged and output as a guest bill.
None
Remote Wake-up Call
An extension designated as the hotel operator can set a timed reminder for a room remotely.
PrivateEvent WakeupResult
SMDR for External Hotel Application
Hospitality feature data, including check-in, check-out, and timed reminder times, can be output to SMDR for use in a PC-based hotel application.
CallDetailRecordsReportStartCallDetailRecordsTransmissionStopCallDetailRecordsTransmission
CSTA Features List
New CSTA Features
Ext. Number and Verification CodeSMDR: Ext. number and Verification Code Output
“
SMDR: Ext. number and Verification Code - 1
Previous Function
Date Time Ext CO Dial Number Ring Duration Cost Acc code CD-----------------------------------------------------------------------------------08/01/08 04:02PM *123 0022 4771234 00:10'06 00000.00
Ext.2001
ISDN
SMDRDial: *47*1234 5678 + 0+4771234
No Extension number ?Verification Code
Manager wants to know,- Who makes a call?- Which extension is used?
New Function
Date Time Ext CO Dial Number Ring Duration Cost Acc code CD-----------------------------------------------------------------------------------08/01/08 04:02PM 2001 0022 4771234 00:10'06 00000.00 1234
Disable: Verification Code only (Default) Enable: Ext. Number + Verification Code
Sales Company Password *PCCKXTDA*
SMDR
Verification CodeExtension number
NB: When we use an account code and a verification code at the same time, the account code is not printed out. The verification code is only printed out.
SMDR: Ext. number and Verification Code - 2
TRS Function Improvement Independent TRS table 2-6
“TRS Function Improvement - 1
Previous Function
TRS-2
Follow Level 2
00 01 02 03 04
TRS-6
Follow Level
2,3,4,5,6
Follow Level
2,3,4,5
TRS-5
Follow Level 2,3,4
TRS-3
Follow Level 2,3
TRS-4
“TRS Function Improvement - 2New MPR System Programming
Previous FunctionNew Function
“TRS Function Improvement - 3
New Function
TRS-2
Follow this Level only
00 00 00 00 0001 02 03 04
TRS-6
Follow this Level only
Follow this Level only
TRS-5
Follow this Level only
TRS-3
Follow this Level only
TRS-4
“TRS Function Improvement - 4
0 0 0 01234
01 00020304
New TRS Sample ProgrammingNew Function
“TRS Function Improvement - 5
0 (National)00 (International)
Workers-2 (Limited City call only)
International sales manager
National sales manager
General manager
Workers-1 (City call only)
Ext.105 (TRS-6)
Ext.103 (TRS-4)
Ext.102 (TRS-3)
Ext.101 (TRS-2)
Ext.104 (TRS-5)
Not Allowed
Allowed
Not Allowed
Allowed
Not Allowed
Not Allowed
Not Allowed
Allowed
Allowed
Not Allowed
TRS-6
TRS-4
Exception Code
00
0, 1, 2, 3, 4
Denied Code
0
TRS-3
TRS-2
01, 02, 03, 040
TRS-5 0
New TRS Sample ProgrammingNew Function
Music On Hold by DDI tenant
“Music On Hold by DDI tenant base - 1
Customer request
Tenant-1:Music on Hold -1
User-G-1 User-G-2
Incoming call to an user group-1 extension, when the call is placed into hold, the TDA connects the Music on Hold-1.
Music on Hold Source = Ext. → User-G → Tenant → MOH select
An extension is shared by two companies (Company-A:DDI-1 and Company-B:DDI-2). The customer wishes to send different MOH to caller based on CO-line.
MOH-2
Calls to Company-B
MOH-1
Calls to Company-A
Previous Function
“
Music on Hold Source = CO/DDI → Tenant → MOH select
Programming
Music On Hold by DDI tenant base - 2New Function
“Music On Hold by DDI tenant base - 3
Customer requestAn extension is shared by two companies (Company-A:DDI-1 and Company-B:DDI-2). The customer wishes to send different MOH to caller based on CO-line.
MOH-2 (Tenant-2)
Calls to Company-B DDI-2 (Tenant-2)
Shared Operator
MOH-1 (Tenant-1)
Calls to Company-A DDI-1 (Tenant-1)
New Function
Caller ID Notification VM Transfer
ISDN
Ext.202Ext.201
“Caller ID Notification VM Transfer - 1
VM Transfer (Ext.202)
Previous Function
Access the mail box
Message without Caller ID information
Without Caller ID information
External Call
ISDN
Ext.202Ext.201
“
VM Transfer (Ext.202)
Access the mail box
Message with Caller ID information
With Caller ID information
External Call
New MPR
Caller ID Notification VM Transfer - 2
New Function
Call Log on Busy Extension
“Call Log on Busy Extension - 1
Previous Function
ISDN
Ext.201 Ext.202
PROG INFO RING MENU
28 DEC. 01:01 PM THU
MENU
202
Talking to Ext.202
PROG INFO RING MENU
28 DEC. 01:01 PM THU
Ext.201 Free
Disconnect
Busy SignalExternal Call
Busy
No Call Log
“Call Log on Busy Extension - 2
ISDN
Ext.201 Ext.202
PROG INFO RING MENU
28 DEC. 01:01 PM THUIncoming Call : 001
MENU
202
Talking to Ext.202
PROG INFO RING MENU
28 DEC. 01:01 PM THU
Ext.201 Free
Disconnect
Busy Signal
No Optional program
External Call
Call Log
Call Log on Busy/FWD-All Extension.
Busy
New Function
New MPR
D-PT Disconnect/Re-connect status
“D-PT Disconnect/Re-connect status - 1
Ext.202
Customer request
Ext.201
Re-connectDisconnect
Status Information to PC via RS232C
Data Convert Software
IN OfficeExt.202
OUT OfficeExt.201
PC Screen
“D-PT Disconnect/Re-connect status - 2
Status Information
Ext.201
Disconnect
New Function
Default: DisableDisconnect information
Sales Company Password *PCCKXTDA*
09/01/07 01:57PM MN ALM #329 10704 Data Link failureDisconnect Information
Slot + Port
New MPR
“D-PT Disconnect/Re-connect status - 3
Ext.201
Re-connect
Status Information
Default: DisableRe-connect information
Sales Company Password *PCCKXTDA*
Re-connect Information09/01/07 01:59PM MN ALM #398 10704 Data Link established
Slot + Port
New Function
New MPR
ICD group call log
ICD group call log
- No-answer calls and Answered calls
“
New Function
- Only No-answer calls
Previous Function
Automatic Call Waiting for Extension call
Without BSS operation the automatic call waiting function can be performed.
Ext.202
Busy
“Automatic Call Waiting for External callSystem Programming
Default : Disable
New FunctionISDN
Ext.201 (Operator)
Without BSS operation.Dial “1”
Call Ext.202
KX-NT300 Series Support
KX-NT300 Series Support “
New MPR
KX-TDA0470V2.001
Self-labeling Feature is not supported
12 key console is supported
NT343 NT346
Not Support
NT366
Not Support
NT305
IP-Network
Peer to Peer connection does not support.
IP-Ext. Card software should be 2.001 or later.
NT303NT321
CTI Improvements- Retrieve operation- Dialing information- Speed dial name
“Retrieve operation using CTI application
MPR 3.1 OperationOff-hook mode
ISDN
Ext.201 PC-Phone
Ext.201
Retrieve by CTI application→ Speaker phone mode
MPR 5.0 OperationRetrieve by CTI application→ Still handset mode
If option 02-6 is enable this improvement does not work.
Sales Company Password *PCCKXTDA*
Default: Disable
Dialing information before ARS modification
ISDN
Dial = 0 543-210MPR 3.1 OperationDialing Information → 12345543210 (It may include a PIN to access to carrier)
MPR 5.0 OperationDialing Information → 543210 (only dialing information/data)
If option 02-7 is enable this improvement does not work.
Sales Company Password *PCCKXTDA*
PC-Phone
Ext.201ARS=ON
Add #: 12345
Ext.201
12345-543210 Dialing Info.
Default: Disable
ISDN
PC-Phone
Ext.201Ext.201
Speed dial name is informed to CTI application
MPR 3.1 OperationCalling Name Information → “Blank”
MPR 5.0 OperationCalling Name Information → PCC
No-option setting.
Speed Dial
0543210: PCC
Calling Name Info.
Caller-ID 543210
CLIP 543210
Network Connection Improvements- CLIP Modification- Caller-ID Modification Table
(The same features as TDA30 MPR 4.0)
Ext.201
“CLIP Modification
MPR 3.1 Operation
Outgoing CLIP→ 12345 (Delete the Leading Digit of received CLIP) MPR 5.0 Operation
Enable Option 03-1 to activate this improvement.
Sales Company Password *PCCKXTDA*
C-FWD to CO (B)ISDN
Caller-ID 012345
CLIP xxxxxx
CLIP 012345
Outgoing CLIP→ 012345 (Received CLIP)
B
Default: Disable
“Caller-ID (CLIP) Modification Table - 1
ISDN
Caller-ID 012345
Caller-ID 012345CLIP
Modification
Table
CLIP 12345 (National)
MPR 3.1 Operation
“Caller-ID (CLIP) Modification Table - 2Sales Company Password *PCCKXTDA*
MPR 5.0 Operation
CLIP
Modification
Table
Default: Disable
Enable Option 03-2 to activate this improvement.
Thank You Very MuchFor Your Attention