KX-TDA/TDE/NCP New Features/Functions Ver.3 Panasonic Communications CO.,LTD.
-
Upload
sherman-allen -
Category
Documents
-
view
236 -
download
0
Transcript of KX-TDA/TDE/NCP New Features/Functions Ver.3 Panasonic Communications CO.,LTD.
KX-TDA/TDE/NCPNew Features/Functions
Ver.3
Panasonic Communications CO.,LTD.
Enhanced SD or Enhanced Key Note
Conference feature improvement No MEC is needed.Enhanced Common Extension Feature(Common extension numbering for 2 or more PBXs)
Yes
CLIP of extension which set C-Fwd can be set to ISDN Network by programming option.
No
Improved ARS function. (Dial 011 and 01 is supported) No
128 IP-PT by MPR card is supported. No
Display power unit type. No Sales company mode
FAX auto transfer via ESVM NoMax. IP trunk simultaneous call (SIP-Trunk + H.323 G/W) 32 64 ➔ No Sales company
mode
“New Features/FunctionsThe following new features/functions are available from,- TDE MPR 3.0
Enhanced SD or Enhanced Key Note
Official support for KX-DT3xx No
American PRI caller ID support. No
Canadian PRI caller name support No
Max. Number of A/K 40 100➔ No
“New Features/FunctionsThe followings are minor modification from,- TDE MPR 3.0
New Conference Function(8-Party Conference and Broadcast)
“8-Party Conference and Broadcast -1
Local
ISDNAnalogue
Owner
External
Remote
QSIG
Outline- A PT (Owner) can call multiple parties, assigned as members of a conference group.- Max. 8 conference groups can be programmed.- 2 Conference Mode:
- 8-Party Conference Mode (Owner + 7 members): Two-way communication.- Broadcast Mode (Owner + 31 members): One way communication.Cannot mix Broadcast or Conference feature - not possible on same system.
QSIG extensions (Remote office) can be member of a conference group.
A MEC card is needed.
External terminals (ISDN/Analogue) can be members of a conference group.
MEC
“
Owner Max. 24 MembersTwo-way One wayMax. 7 Members
8-Party Conference Mode
N/A
Owner Two-way One wayMax. 7 Members
Broadcast Mode
N/A
Owner Max. 31 MembersTwo-way One way
The Owner can control local PBX members.
8-Party Conference and Broadcast - 2
“
Owner Two-way One way
N/A
Owner Two-way One way
N/A
Owner Two-way One way
Group-8
Group-1
Group-x
Total32 Terminals
The number of simultaneous conference calls
8-Party Conference and Broadcast - 3
Available terminalsLocal PBX ExtensionsExternal parties ISDN/Analogue
“8-Party Conference and Broadcast - 4
Non-listed Ext.
The Owner can control local PBX members.
Owner Two-way One wayMax. 7 Members
Can Join
IN/OUT
Member Control (8-Party Conference Mode)
Disconnect
“8-Party Conference and Broadcast - 5
Non-listed Ext.
Member Control (Broadcast Mode)
The Owner can control local PBX members.
Owner Two-way One way
Can Join
IN/OUT
Available terminalsLocal PBX ExtensionsExternal partiesISDN/Analogue
Max. 7 Members
Disconnect
8-Party Conference Mode
8-party conference
Total 8 parties
Owner
“8-Party Conference and Broadcast - 6
System Programming
Broadcast Mode
31 BroadcastingTotal 32 parties
Owner
“8-Party Conference and Broadcast - 7
System Programming
- D-PT- IP-PT- PBX-DECT
Can be
- SLT- ISDN-Ext.- SIP Ext.- External Caller
Cannot be
Owner Extension
“8-Party Conference and Broadcast - 8
Should be “Enable”
System Programming
Max. 8 Groups
Conference Groups
“8-Party Conference and Broadcast - 9
System ProgramSystem Programming
Members (8-party Conference Mode)
“
Max.7
8-Party Conference and Broadcast - 10
8-party conference members
System Programming
Members (Broadcast Mode)
31Broadcast members
“8-Party Conference and Broadcast - 11
Max.31
System Programming
- PT/SLT/ISDN- PS- SIP- TIE Extension- External line (ISDN/Analogue)
Member
Can be
- ICD-Group- PS Ring Group- VM Group- External Pager- DISA
Cannot be
Members
“8-Party Conference and Broadcast - 12
20120220330130274771111747711120477111104771112
System Programming
LCD: Calling Extension
LCD: Calling / Called Extension
From an owner Extension,Normal mode : Dial *32 + Conference group number + #Security mode : Dial *32 + Conference group number + Conference Password + #
Conference1: PCCUK
When a member of the group answers the call.
Conference : 2
LCD: Called Extension
ConferenceNo of
member
Make a conference
“8-Party Conference and Broadcast - 13
Ringing stops via a pre-programmed timer.
If a member does not answer the call?
“8-Party Conference and Broadcast - 14
System Programming
Member Control (8-party Conference Mode)
Dial *32 + conference group number #
➔ Extension answers (All Extension are in conference mode).
Multi partyConference
Group-1 7 Members
Two Way
“
203
202
201
201202203
201202203
DSS
8-Party Conference and Broadcast - 15
Owner
202
Member Control (8-party Conference Mode)
➔ Press “DSS” button (Owner) Remove the member from conference mode ➔ ➔Press “DSS” button (Owner) again Establish the conversation again.➔(Similar Operation can be done by the CONF/TRANSFER keys.)
Multi partyConference
Group-1 7 Members
Two Way
201DSS
DSS
One Way
“
203
202
201
201202203
201202203
DSS
8-Party Conference and Broadcast - 16
Owner
204
Member Control (8-party Conference Mode)
Non listed Member:
Dial *32# + Conference group number + # Join the conference.➔
Multi partyConference
Two Way
“
203
202
201
201202203
204 *32# + Conference group number + #
If a customer needs security, please use the security conference mode.
201202203
DSS
8-Party Conference and Broadcast - 17
Owner
Group-1 7 Members
KX-HGT100Possible
From an owner Extension,Dial *32 + Conference group number + Conference password + #Conference password : 1-8 digits (0-9) or *: Owner can decide when making the conference.
“
204
Multi partyConference
Group-1 7 Members
Two Way
203
202
201
204
*32# + Conference group number +
Conference password + #
Make a conference (Security Mode)
201202203
DSS
If the owner uses * as conference password, nobody can join the conference.Owner
8-Party Conference and Broadcast - 18
Member Control (Broadcast Mode)
Dial *32 + conference group number # Extension answers (All Extension are in ➔Broadcasting mode).
Multi partyConference
Two Way
“
204
202
201
201202203204
One Way
203
8-Party Conference and Broadcast - 19
Owner
Group-1 7 Members
202
➔ Press “DSS” button (Owner) Establish the conversation. ➔Max. 7 Broadcasting Members can join a multi party conference.
Multi partyConference
Two Way
201
One Way
“
202
201
203Max.7
201202203
DSS
201202203204
Member Control (Broadcast Mode)
204
In
In
DSS (202)
DSS (201)
8-Party Conference and Broadcast - 20
Owner
Group-1 7 Members
202
➔ Press “DSS” button (Owner) Remove the member from conference mode.➔
Multi partyConference
Tow Way
201
One Way
“
202
201
203
201202203
DSS
201202203204
Member Control (Broadcast Mode)
204
Out
Out
DSS (202)
DSS (201)
8-Party Conference and Broadcast - 21
Owner
Group-1 7 Members
If a Broadcasting member wants to join,
➔ Press “200 DSS” button (Ext.201) Off-hook call tone on the owner Ext.➔ ➔ Press “201 DSS” button (Owner) Establish the conversation.➔
Multi partyConference
201
“
202
203
Member Control (Broadcast Mode)
200202203
DSS
200 Two Way
Press “DSS”
I want to join (Meet Me)
This function is only possible on local extensions.
Not possible: Remote Extensions
External Parties
Off-hook call tone
8-Party Conference and Broadcast - 22
Owner
Group-1 7 Members
207
203
When 7 broadcasting member are in the same multi party conference, the 8th member cannot join to the multi party conference,
Multi partyConference
Two Way
“
202
201
Max.7
201202203204205
DSS
201202203204205206207208
Member Control (Broadcast Mode)
208Cannot join
8-Party Conference and Broadcast - 23
Owner
Group-1 7 Members
Local
External
Remote
QSIG
“
Conference
ISDN Analogue
External
Yes
YesNo
Member Control (Remote Ext./External Party)
Join ConferencePossible:
- Local Extensions - External parties through ISDN- External parties through Analogue
Not Possible:- Remote Extensions
8-Party Conference and Broadcast - 24
Owner
Great !!!!
External
“
Conference
ISDN Analogue
External
Member Control (Remote Ext./External Party)
Great !!!!
20120220304771111047711120577111105771112
Conference Member Programming
External Party Numbers
577-xxxx477-xxxx
NB:The PBX cannot see an analogue line call status (E.g. Answer, Disconnect) , therefore the PBX does not release the line until the conference is finished.
8-Party Conference and Broadcast - 25
Owner
Yes
Yes
External
“
Conference
ISDN Analogue
External
Member Control (Remote Ext./External Party)
If a PBX owner does not want an employee to make a conference with external party, please set the reserved bit 07-6 to “Enable”
Reserved bit 07-6Enable : Not possibleDisable : Possible (Default)
Sales Company Mode
Owner
8-Party Conference and Broadcast - 26
“
Conference
ISDNAnalogue
DISA
Member Control (How to Join from External Party - 1)
3- Dial *47+ *Verification Code + PINor Dial *47 + Ext. No. + PIN
External
4- Confirmation Tone
1- Dial to DISA
5- Dial *32# + Conference group number +
Conference password + #
2- DISA answers
Owner
Join Conference
8-Party Conference and Broadcast - 27
An external caller cannot start a conference via DISA.
“
Conference
ISDN
DISA
3- Dial *32# + Conference group number +
Conference password + #
System Speed Dial (SSD) Entry
000: 0488-1234: CLI Ext.201
CLIP 488-1234
Enhanced SD or Enhanced Key
External
2- DISA answers
1- Dial to DISA
Owner
Join Conference
8-Party Conference and Broadcast - 28Member Control (How to Join from External Party - 2)
An external caller cannot start a conference via DISA.
“
Default: DisableOption: Enable
Tanaka 04881234 201Yamada 04881235 202Toyota 04881236 203
System Programming (System Speed Dial)
System Programming
8-Party Conference and Broadcast - 29
FLASH/RECALL
➔ Press “FLASH/RECALL” button Remove (Disconnect) the member who ➔joined the Multi party conference last.
“
203203
201
202
204
Out of ConferenceMulti partyConference
Two Way
Owner
201202203204
Member Control (Remove member)
Disconnect
One way
Group-1
Multi party Conference Join Order1st 2012nd 203 The last
8-Party Conference and Broadcast - 30
“
201
202
204
Multi partyConference
Two Way
Owner
201202203204
Member Control (Remove member)
Group-1
FLASH/RECALL
203
Out of Conference
Disconnect 201
Multi party Conference Join Order1st 2022nd 201
➔ Press “FLASH/RECALL” button Remove (Disconnect) the member who ➔joined the Multi party conference last.
The last
8-Party Conference and Broadcast - 31
➔ Cannot directly control a member (Disconnect by Flash/Recall button) in the one way area.
“
203
201
202
204
Multi partyConference
Two Way
Owner
201202203204
Member Control (Remove member)
One way
Group-1 Out of Conference
Disconnect
Multi party Conference Join Order1st 2022nd 201
8-Party Conference and Broadcast - 32
Question: How to disconnect the one way members.
“
203
201
202
204
Multi partyConference
Two Way
Owner
201202203204
Member Control (Remove member)
One way
Group-1 Out of Conference
Disconnect
Multi party Conference Join Order1st 2022nd 201
?
8-Party Conference and Broadcast - 33
“
203
201
202
Multi partyConference
Two Way
Owner
201202203CO1
Member Control (Remove member)
One way
Group-1 Out of Conference
FLASH/RECALL
Multi party Conference Join Order1st 2012nd 2023rd 2034th External
Disconnect
8-Party Conference and Broadcast - 34
➔ Can control (Disconnect by Flash/Recall button) an external party.
“
204
203
201
202Out of Conference
Multi partyConference
Two Way
Owner
201202203204
The Owner extension “Flash Mode” should be “Flash Recall” Mode.
System Programming
Group-1
8-Party Conference and Broadcast - 35
Conditions, if an extension has,
Set to C-FWD ? ➔ The broadcast call arrives this extension.Set to DND ? ➔ The broadcast call does not arrive this extension.Busy ? ➔ Call waiting function will be performed.Auto Answer ➔ The Auto Answer function will not be performed.SXDP-PS ? ➔ The broadcast call does not arrive this PS.Internal Call Block is Block ➔ The broadcast call does not arrive this extension.
Other ConditionsIf owner extension has DSS key of a member of broadcasting group and establishes a broadcasting call, the DSS key does not flash when the called extension rings.It actually turns red (not flashing).
8-Party Conference and Broadcast - 36 “
Enhanced Common Extension Feature
Common extension numbering for 2 or more PBXs
“Enhanced Common Extension Feature - 1
IP Net
Common Extension over multi PBX Connection
DSPH323 G/W
103
DSPH323 G/W
DSPH323 G/W
104
DSPH323 G/W
101
102
How to Program ?
10.10.10.3
10.10.10.2
10.10.10.4
10.10.10.1
Office-3
Office-2
Office-4
Office-1
Common Extension numbering function is an Enhanced function.
➔ Enhanced A/K/SD card is required.
“
GW Setting and DN2IP
Office-1 Office-2 Office-3 Office-4
Ext. Destination IP Ext. Destination IP Ext. Destination IP Ext. Destination IP 102 10.10.10.2 101 10.10.10.1 101 10.10.10.1 101 10.10.10.1103 10.10.10.3 103 10.10.10.3 102 10.10.10.2 102 10.10.10.2104 10.10.10.4 104 10.10.10.4 104 10.10.10.4 103 10.10.10.3
-Only 512 Entries- Not easy
Enhanced Common Extension Feature - 2
“
IP Net
Enhanced Common Extension Operation
DSPH323 G/W
103
DSPH323 G/W
DSPH323 G/W
104
DSPH323 G/W
101
102
10.10.10.3
10.10.10.2
10.10.10.4
10.10.10.1
TDE/NCP MPR 3.0
TDE/NCP MPR 3.0
TDE/NCP MPR 3.0TDE/NCP MPR 3.0
All PBX have to be TDE/NCP MPR 3.0.
Enhanced Common Extension Feature - 3
“
Very easy !!!!
GW Setting and DN2IP
Enhanced Common Extension Feature - 4
Program Point
This function is available on Virtual-IPG/W-16, not on Physical IP-GW16.
“
IP Net
How to works
103 101
102
1- Dial 103
4-Hunting
2- Setup
3- It is not mine
5- Setup
Enhanced Common Extension Feature - 5
10.10.10.1
10.10.10.2
10.10.10.3
“Enhanced Common Extension Feature - 6
IP Net
1xx
199
100
101
10.10.10.xx
10.10.10.2
10.10.10.100
10.10.10.1
Office-xx
Office-2
Office-100
Office-1
Logically, it is possible to connect Max.100 PBXs.
Why 100 PBXs?
Call-FWD CLIP
“Call-FWD CLIP - 1
ISDN
1- Subscriber-A (CLIP 477-1111) calls your extension.2- The call is re-routed to your cellular.
➔ CLIP = 477-11113- The ISDN provider does not accept “CLIP=477-1111”
Because, 477-1111 is Out of DDI range 577-1111-1999.4- The ISDN provider sends the main DDI number “577-1111” to the
C-FWD destination. ➔ But, I want to have CLIP=577-1234.
Previous Function
My cellular
C-FWD to my cellular
1
2
Subscriber-ACLIP 477-1111
CLIP = 477-111134
My ExtensionCLIP 577-1234
“Call-FWD CLIP - 2
ISDN
New Function
My cellular
C-FWD to my cellular
1
2
Subscriber-ACLIP 477-1111
CLIP = 577-123434
My ExtensionCLIP 577-1234
Please select “Disable”
ISDN
Ext. 101CLIP : 577-1234C-FWD 9-882-1111
TDA/TDE Previous (FYI)
OR
“
Caller’s CLIP: 477-1111
Caller’s CLIP: 477-1111
Received CLIP:????????
Received CLIP:5771999
ISDN
Ext. 101CLIP : 577-1234 C-FWD 9-882-1111
CO-to-COCLIP: 477-1111
577-1999
CO-to-COCLIP: 577-1999
Call-FWD CLIP - 3
501 5771234
Dummy PS settingExt. 501 (FWD- 9-882-1111)Ext. CLIP: 5771234
ICD-Group Ext.601Ext. 501 (Dummy PS)
ISDN
CLIP: 5771234
“
CO-to-CO
- Enhanced SD card is needed.- Program is complicated.
Received CLIP:5771234
Call-FWD CLIP - 4
Ext. 101CLIP : 577-1234C-FWD 601
Previous Countermeasure (FYI)
Improved ARS function
Dial 9/0 0xxxDial 9/0 01xxDial 9/0 011xDial 9/0 0111x
Every Time, the routing plan-1 is selected.
“Improved ARS function - 1
Previous ARS Function
Dial 9/0 0xxx
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS=ON
ARS Routing TableNeed more flexible ARS routing plan.
ISDNAnalogue
Dial 9/0 0X(e1) the routing plan-1
Dial 9/0 01X(e1) the routing plan-2
Dial 9/0 011X(e1) the routing plan-3
Dial 9/0 0111X the routing plan-4
“Improved ARS function - 2
New ARS Function
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS Routing Table
Dial 9/0 02 the routing plan-1
“Improved ARS function - 3
New ARS Function
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS Routing Table
Dial 9/0 (CO access Code)Dial 0 Matched 0, 01, 011, 0111➔ Wait next number.➔Dial 2 Matched 0➔ Select the routing plan-1➔
Dial 9/0 012 the routing plan-2
“Improved ARS function - 4
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS Routing Table
Dial 9/0 (CO access Code)Dial 0 Matched 0, 01, 011, 0111➔ Wait next number.➔Dial 1 Matched 01, 011, 0111➔ Wait next number.➔Dial 2 Matched 01➔ Select the routing plan-2➔
New ARS Function
Dial 9/0 0112 the routing plan-3
“Improved ARS function - 5
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS Routing Table
Dial 9/0 (CO access Code)Dial 0 Matched 0, 01, 011, 0111➔ Wait next number.➔Dial 1 Matched 01, 011, 0111➔ Wait next number.➔Dial 1 Matched 011, 0111➔ Wait next number.➔Dial 2 Matched 011➔ Select the routing plan-3➔
New ARS Function
Dial 9/0 0111 the routing plan-4
“Improved ARS function - 6
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS Routing Table
Dial 9/0 (CO access Code)Dial 0 Matched 0, 01, 011, 0111➔ Wait next number.➔Dial 1 Matched 01, 011, 0111➔ Wait next number.➔Dial 1 Matched 011, 0111➔ Wait next number.➔Dial 1 Matched 0111➔ Select the routing plan-4➔
New ARS Function
Dial 9/0 0 + No dial the routing plan-1
“Improved ARS function - 7
Leading Number
Routing Plan
0 1
01 2
011 3
0111 4
ARS Routing Table
Dial 9/0 (CO access Code)Dial 0 Matched 0, 01, 011, 0111➔ Wait next number.➔No dial ➔ “Inter-digit Timer” has ended. Select the routing plan-1➔
New ARS Function
“
If a customer wish to use the previous Function
There is no option setting to disable the new function.
Improved ARS function - 8
128 IP-PT by MPR card is supported.
“128 IP-PT - 2
TDA/TDE MPR 3.0 (128 IP-Extensions)
128 = 32 x 4
“128 IP-PT - 3
TDA/TDE MPR 3.0 (128 IP-Extensions)
128 = 32 x 4128 SIP Extension is possible.
Display power unit type
“Display power unit type
Command
Sales company log in mode. Power unit type
FAX auto transfer via ESVM
“FAX auto transfer via ESVM
TDA/TDE MPR 3.0
TDA/TDE Previous MPR
We can use ESVM (not B-ESVM).
We can not use ESVM/B-ESVM
Max. IP trunk simultaneous call
“Max. IP trunk simultaneous call - 1
TDA/TDE MPR 3.0
TDA/TDE Previous MPR
Total Max.64 calls
DSP
H.323 G/W 32ch
SIP G/W 32ch
Total Max.32 calls
DSP
H.323 G/W 32ch
SIP G/W 32ch
“
Sales Company Mode
Max. IP trunk simultaneous call - 2
Max. 64 calls (Option)Max. 32 calls (Default)
Reserved bit 06-7Enable : 64 Calls
Thank You Very MuchFor Your Attention