KX-HGT100 SIP-Phone

Panasonic Telephone Systems www.voicesonic.comPhone 877-289-2829Panasonic KX-HGT100, KXHGT100, HGT100

CONFIGURATIONS AND USER SETTINGS

KX-HGT100 Configuration (1)

User name: KX-HGT100

Password: kx-hgt100

1. Connect the HGT100 to the LAN via a suitable switch port

2. Power on the unit (using PoE or the optional AC Adaptor)

3. Check the LCD Display shows “Not configured

Web Setting”

4. Using your Browser (Internet Explorer etc), access http://192.168.0.241/

Not Configured

Web Setting

KX-HGT100 Configuration (2)

Unit has no Profile set.

Registration is not possible

Unit Status:

KX-HGT100 Configuration (3)

STATIC IP is set by default

Default IP:

192.168.0.241

Default Subnet Mask 255.255.255.0

Network Status:

KX-HGT100 Configuration (4)LAN Connection:

STATIC IP or DHCP Mode can be selected.

(Static IP is Default = X )

NB: If you select ‘DHCP’ here, you will need to re-connect your browser using the allocated IP address before continuing to configure.

KX-HGT100 Configuration (5)

Enter IP Address etc of HGT100 here

DNS Server Address can be added here

(not required for TDE/NCP)

After clicking ‘Save’, please power off/on the HGT-100

KX-HGT100 Configuration (6)

NB: When using DHCP, ensure that the PC connected to the PC-Port is on the same network segment as the HGT-100, otherwise Internet access from the PC will not be possible.

The allocated IP address can be checked by pressing the [i+] key on the HGT-100.

To re-connect with a browser (after enabling DHCP), enter the allocated IP address)

i.e. Allocated IP address 10.66.55.44

URL:http://10.66.55.44/

After clicking ‘Save’, power off/on the HGT-100.

KX-HGT100 Configuration (7)Username and Password:

Modifies the HTTP Login User name and Password from default

If Idle Timeout expires, unit will need to be powered off/on to re-open HTTP port. (“Special” Setting)

KX-HGT100 Configuration (8)Basic Settings:

Refer to next slide for language parameters;

SIP Extension details and password (Telephone Number and SIP ID can match)

SIP Proxy, Registrar and Domain information.

For NCP Extension, enter the IP address of the NCP for all settings.

KX-HGT100 Configuration (9)Basic Settings: (Example)

(Stand-Alone SIP Telephone configuration with Gamma SIP Account)

SIP Number, Account and password.

SIP Proxy, Registrar and Domain (IP or DNS).

KX-HGT100 Configuration (11)Advanced Settings:

One Time Caller Code either Permits or Denies CLIP sending on a per call basis, depending on the “My Caller ID” setting of the HGT100.

RTP Port Range (Voice Traffic)

Codec Priority:

PCMA/U = G711A/U

G726-32 (N/A for TDA/NCP)

G729A

DTMF Type: Inband/Outband(RFC2833)

SIP UDP Control port

Diffserv(ToS) field settings

KX-HGT100 Configuration (14)Configuration File:

Basic Configurations can be backed-up and/or loaded via this screen.

This allows a dealer to create a profile template and then modify only a small number of parameters (Number/Password etc)

KX-HGT100 Configuration (15)Upgrade Firmware:

Firmware updates can be managed easily from this page.

Power off/on the unit to complete the upgrade.

KX-HGT100 Configuration (16)Unit Maintenance:

Lan/PC Port.

Speed/Duplex Settings;

Auto Negotiate

100Mbps/Full Duplex

100Mbps/Half Duplex

10Mbps/Full Duplex

10Mbps/Half Duplex

Auto Sense is supported.

‘PROGRAM’ KEY

LCD DISPLAY

‘NAVI’ KEY

‘INFORMATION’ KEY

‘MUTE’ KEY

KX-HGT100 User Setting (1)

‘OK’ KEY

AUTO HOLD Message Transfer

‘SP-Phone ‘KeySP-Phone, Hold and Message Keys have LED.‘REDIAL’ KEY

Save Speed Dial?

[OK]=YES

KX-HGT100 User Setting (2)

Saved in No. 1

Select OKPROGRAM

Enter No. 1 No. 1 [OK]=SET

0123456789

Speed dial 0 ~ 9

1

How to access :-

‘OFF-HOOK’

Keys used:

1.

AUTO

Set Date + Time

[OK]=YES

KX-HGT100 User Setting (3)

Enter Year 2008

[OK]

Enter Month/Day

05/07 [OK]

Enter Time

17:30 [OK]

▲▼= AM/PM/24H

17:30PM [OK]

My Caller ID

(Show) [OK]=YESOK Select

Show/HideOK

CLIR (Show/Hide)

2.

3.

KX-HGT100 User Setting (4)

LCD contrast ?

[OK]=YES

4.

- ██████ +

[OK]=YES

Select

4 STEPS

Ringer Tone ?

Ring 1 [OK]=YES

5.

Ringer Tone ?

Ring 2 [OK]=YES

Select

3 STYLES

Ringer Volume ?

Ring 1 [OK]=YES

6.

Ringer Volume [OK]

OFF - █████ +Select

4 Position + ‘OFF’‘OFF’ = SP-Phone LED Flashes

KX-HGT100 User Setting (5)7.

Set Hold Music ?

(#01) [OK]=YESSelectOK

#11 Settings (Inc ‘OFF’)

8.

KeyTone Volume ?

[OK]=YES

Keytone Volume

OFF - ███ + [OK]Select

3 Settings (Inc ‘OFF’)

Time AM/PM 24H

(AM) [OK]=YES

9.

OK Select AM/PM/24H

KX-HGT100 User Setting (6)10.

Change Language ?

English [OK]OK Select

Refer to Slide #14 for supported languages

Set Network ?

(STATIC) [OK]=YES

11.

OK Select

STATIC IP

Or

DHCP

IP Address [OK]

192.168.010.003

Subnet Mask [OK]

255.255.255.0

Default GW [OK]

192.168.000.001

KX-HGT100 User Setting (7)

Select

IP Address192.168.010.003

Subnet Mask255.255.255.0

Default Gateway192.168.000.001

INFORMATION

Own number01234

1

StatusNormal

2

NetworkSTATIC

3

6

5

4

KX-HGT100 ‘Special’ setting (1)‘Special’ Settings:

Factory Default:

To return the unit to it’s factory default settings, press

[Program] + [OK] + [Mute] and power-on the unit.

If successful, “Not Configured Web Setting” will be displayed in the LCD.

HTTP Port open:

To re-open the HTTP Port after initial setting or Idle time-out (default 30min)

[OK] + [Mute] and power-on the unit.

Firmware Roll-back:

To rollback the firmware to the previously installed version

[Program] + [Mute] and power-on the unit.

Panasonic Telephone SystemsSee MorePanasonic Manuals

www.voicesonic.comPhone 877-289-2829