KW-TDS-KW308A-20131120 TMB KW Plastics · 2013. 11. 20. · KW Plastics PCR TECHNICAL DATA SHEET...
1
KW Plastics PCR TECHNICAL DATA SHEET KW308A PROPERTY REGULATORY Copolymer Impact Polypropylene Post-Consumer Resin Melt Flow D1238 8.0 g/10 min. 1133 10.0 g/10 min. Specific Gravity pigmented D792 0.92 g/ml 1183 0.92 g/ml Tensile Elongation 13.0 % 13.0% Tensile Yield Strength D638 3,000 psi, min. 527 22.0 MPa Flexural Modulus D790 120,000 psi 178 850 MPa Heat Deflection, 264psi/1.8 MPa D648 42 o C 75 Notched Izod Impact D256 non break 180 Melting Point FLTM BO 21-2 160 o C - - CONEG Compliant <100 ppm total ROHS Compliant NOTE: While this information is presented in good faith and believed to be accurate, KW does not guarantee satisfactory results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use. No information contained herein is to be construed as a recommendation to use this product in conflict with any patent. Chrysler 911B, MS-DB500, CPN 2194 Ford Motor WSS-M4D911-B2 Volkswagon TL 52649 No-break impact strength; available as mixed color or pre-colored black. ISO 9001: 2008 registered, ISO/ IEC 17025: 2005 accredited laboratories, C.O.A. on every lot. CHARACTERISTICS AUTOMOTIVE APPROVALS KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING. ASTM Method ASTM Data QUALITY 1 Sanders Road Troy, AL 36081 | 334.566.1563 | 800.633.8744 | kwplastics.com ISO Method ISO Data KW-TDS-KW308A-20131120 TMB NOMINAL VALUES NOMINAL VALUES
Transcript of KW-TDS-KW308A-20131120 TMB KW Plastics · 2013. 11. 20. · KW Plastics PCR TECHNICAL DATA SHEET...
-
KW PlasticsPCR TECHNICAL DATA SHEET
KW308A
PROPERTY
REGULATORY
Copolymer Impact Polypropylene Post-Consumer Resin
Melt Flow D1238 8.0 g/10 min. 1133 10.0 g/10 min. Specific Gravity pigmented D792 0.92 g/ml 1183 0.92 g/mlTensile Elongation 13.0 % 13.0%Tensile Yield Strength D638 3,000 psi, min. 527 22.0 MPaFlexural Modulus D790 120,000 psi 178 850 MPaHeat Deflection, 264psi/1.8 MPa D648 42oC 75Notched Izod Impact D256 non break 180Melting Point FLTM BO 21-2 160oC - -
CONEG Compliant
