1

Kurikulum Vitae Curriculum Vitae

. I. Maklumat Peribadi:

Personal Particulars Nama: Associate Professor Engr. Dr. Noreffendy Tamaldin Name: No. KadPengenalan: 750126-04-5101 Fakulti/Pusat: Faculty of Mechanical Engineering IC No.: Faculty/Centre Associate Professor Jawatan : Faculty of Mechanical Engineering, UTeM Tetap / Sementara/Kontrak: Permanent Current Position: Permenant/temporary Gred Kumpulan: DS54 Tarikh Pertama Berkhidmat di UTeM: 26 May 2003 Gred position Date of First Appointment with UTeM NomborTelefon : 06-234 xxxx / 019 775 2414 E-mel: noreffendy@utem.edu.my Telephone Number E-mail Tarikh Pengemaskinian CV : 29 Nov 2017 Date of CV updated

II. A. Kelulusan Akademik dan Profesional (Sila senaraikan semua kelulusan akademik bermula daripada Ijazah Sarjana

Muda mengikut susunan kronologi) Academic and Professional Qualifications (Please list all academic qualifications, from your first degree in chronological order)

TahunYear

Kelulusan Degree

Pengkhususan

Discipline

Universiti

University

1998

B.Sc M.E Cum Laude (3.44/4.00)

Mechanical Engineering

University of Hartford, CT, USA.

2000

M.Eng. (3.83/4.00)

Mechanical Engineering Utilizing Neural Network for Online Inspection and Process

Control, M.Eng. Thesis, 2000

University of Hartford, CT, USA.

2010

Ph.D.

Automotive-Diesel emission PhD (Diesel Emission-Urea SCR Spray Study)

In Collaboration with Jaguar-Land Rover, Ford Motor Emcon Technologies/Faurecia, & Johnson Matthey.

Coventry University, West Midlands, U.K.

B. Tajuk tesis pascasiswazah (Sila senaraikan tajuk tesis bermula daripada peringkat Sarjana mengikut susunan kronologi) Titles of postgraduate thesis written (Please list all thesis written, from your Master Degree in chronological order) (a) Utilizing Neural Network for Online Inspection and Process Control, M.Eng. Thesis, 2000

(b) Experimental Investigation of Emission from a Light Duty Diesel Engine Utilizing Urea Spray SCR system, Ph.D Thesis, 2010

1. Anugerah akademik Academic award

• UTeM’s University Academic Award 2015 (Emission Inventory) –Special Group Award Finalist

• UTeM Excellent Employee Award 2013

• UTeM’s University Academic Award 2012 (Evergreen) –Special Award

• UTeM’s University Academic Award 2012 (Advance Vehicle Technology) – Special Award finalist

• UTeM Excellent Employee Award 2010

• Scholarship award under academic PhD training scheme, KPT/UTeM,2005~2009

• Malaysian Embassy Washington D.C. Academic Excellence Award Fall 1998.

• Cum Laude Award (3.44/4.00) Fall Commencement 98- University of Hartford.

• 2ndRunner up – Senior Capstone Project ASME Award 98 (3/13) – School of Engineering, University of Hartford.

• Dean List Award 1997, University of Hartford

2

2. Bidang Penyelidikan Utama (Sila senaraikan tiga sahaja)

Main Areas of Research Interest (Please list a maximum of three) (a) Alternative fuel such as Hydrogen/Bio Diesel testing.

(b) Engine performance testing & Emission

(c) Green Engine Tribology & Instrumentation

3. Projek Penyelidikan Yang dilaksanakan(Sila tulis tajuk, tajaan dan nombor rujukan projek sejak 2007) Completed/On-going research project since 2007(Please write the title, funder and reference number)

No. Awarding Body Title Year Amount

1 PJP/2010/FKM(2B)/S00648 Nonlinear Duffing Oscillator For Energy Harvesting Devices-Co-Researcher

2010 RM 15 000

2 PJP/2010/FKM(12B)/S00658 Modeling and Validation of 18-DOF High Mobility Multipurpose Wheeled Vehicle (Hmmwv) Model for Military Application

2010 RM 20 000

3 PJP/2011/FKM(14B)/S00904

Experimental Investigation of Research Octane Number (RON) Grade Fuel Impact on Performance and Emission in Light Duty Gasoline Vehicle.

2011 RM 16 800

4 PJP/2011/FKM(15B)/S00906

Design and Fabrication of A Race Car Vehicle For Perodua Eco-Challenge 2011. Co-Researcher

2011 RM 30 000

5 PJP/2011/FKM(8A)/S00862

Design and Analyze Possible Energy For A Heat Recovery System In Passenger Car Engine Compartment Co-Researcher

2011 RM 20,000

6 FRGS/2010/FKM/TK02/9 F00097

Semi Active Control of Secondary Suspension System for Improving Railway Vehicle Dynamics Performance using Magnetic Damper

2010 RM 47 300

7 FRGS/2012/FKM/TK08/02/1/F00140

Engine Performance and Emission Characteristics of Hydrogen Enrichment in Light Duty Diesel Engine

2012 RM 92 300

8 ERGS/2012/FKM/TK01/02/6/E00006

Towards A Self-Powered Navigation Buoy Using Vibration Based Energy Harvesting Concept From Ocean Wave Motion.

2012 RM 50 000

9 MTUN/2012/UTHM-FKM/1 M00001

An effect of Storage Method and Variant Temperature on Bio-Diesel Properties, Combustion Characteristics and Emission

2012 RM 16 000

10 MTUN/2012/UMP-FKM/1 M00005

Bio-Diesel Fuel Specification and testing. 2012 RM 31 500

11 PJP/2012/FKM(11A)/S01086

Influence of Nano Lubricant on Tribological Performance, Emission and Fuel Consumption of A Diesel Engine Co-Researcher

2012 RM 20 000

12 Perodua Eco Challenge 2012 Development of energy efficient vehicle for PEC 2012. Completed-5th place overall

2012 RM 15 000 (Perodua)

13 Proton PGMC 2012 Competition GLUAR/2013/FKE(1)/100001

Design and development of Electric Vehicle. Completed 3rd place. Best R&D, Winner Vmax, Best Promotion.

2012

RM20, 000 (Proton)

RM99 000 (UTeM)

14 RAGS/2012/FKM/TK01/1 B00001

Novel Thermal Management of HEVs. EVs Battery Modules with Micro PCM/CNT Composites Co-Researcher

2012 RM 79 930

15 COE PJP/2012/CARE/Y00004

Ultra Low Emission and Improved Fuel Economy Hybrid Electric Vehicle 1.Principle–Cylinder Deactivation 2. Co-researcher-Series Hybrids

2013 RM 150 000

16 FRGS/2013/Trans-Disciplinary

New Strategies For Energy Saving: The Future Focus On Energy Efficient Vehicles (EEVs) In Malaysia Co-Researcher Project 1:New Strategic Approach for Thermal

2013 RM 443,280

3

Effectiveness of PCM/Carbon Based Materials-RM111.9k Project4:New Bio-Lubricants for Friction and Wear Reduction-RM107.5k

17 ERGS/2012/FKM/TK01/UTEM/02/04/E00016

Activated Carbon Reinforced Aluminum Matrix Composite (Psac-Al) In Different Environmental Conditions. Co-Researcher

2013 RM91 770

18 PJP Prototype/2013

Developing a Novel, Low Cost, Multi-Adjustable Probe Tool (MAPT) for an Environmentally Friendly Welding Process

2013 RM 17 500

19 Perodua ECO Challenge 2013

Development of Energy Efficient Vehicle for PEC2013 with “City Concept Car” Theme- Team UTeM Perodua Caliphs Result : Overall 2nd Place Longest distance : 2nd place - RM8000 Time Attack : 3rd place -RM3000 Engineering : 1st place - RM10 000 Marketing : 3rd place -RM3000 Best booth : 3rd place Design - 5th place Total Prizes - RM24 000.00

2013 RM20 000

Perodua Myvi 1.3

20 Program Rakan Penyelidik University Malaya (PRPUM 2013)

Design a New Eco-Lightweight Friction Material with Palm Oil Fiber Enrichment for Wear Characteristics Study Co-Researcher

2013 RM 143 750

21 RAGS/2013/FKM/TK01/03/B00042

Wear Characteristics Study of A New Eco-Lightweight Friction Material With Palm Oil Fiber Enrichment Co-Researcher

2013 RM 68 000

Gluar/PPRN/2015/FKM/G00032

Improvement of Electric Toothbrush- -Oral Spa 2015 RM 30 000

22 PJP/2016/FKM/HI1/S01465 HIGH IMPACT PJP

Formulation of Optimized CNT-Filled Epoxy Composites For Enhanced Electrical Conductive Polymer In Electronic Components For Surface Mount Technology

2016 RM 44 000

Gluar/Jabil/2016/Fkm-Care/I00015

An Integrated Approach In Establishing Durable Stretchable Conductive Ink (Sci) For High Performance Application

2016

23 PJP/2017/FKM-CARe/S01564 Investigation of Underfloor Catalyst Light Off with Electric Heater and Secondary Air Injection for Proton Powertrain Optimization

2017- 2018

RM 30 000

24 PJP/2017/FTK-AMC/S01562 Study and Development of River Trash Collector System. Co-Researcher

2017-2018

RM25 000

4. Senarai Anugerah Penyelidikan yang diperolehi(Senarai perolehan anugerah Penyelidikan sejak 2007) List of awards(Please list research awards received since 2007)

EVENT TITLES RESEARCHERS AWARD

1. UTeM Research and Innovation Expo 2012 (UTeMEX 2012)

UTeM 1 : Perodua Eco-Challenge 2012

Musthafah Bin Mohd Tahir Muhammad Zahir Bin Hassan Noreffendy Bin Tamaldin Muhd Ridzuan Bin Mansor Herdy Rusnandi Syahibudil Ikhwan Bin Abdul Kudus Mohd Adrinata Bin Shaharuzaman

Bronze

2. BioMalaysia & Bioeconomy Asia Pacific 2013 Conference & Exhibition

Nano-oil for a Greener Future Mohd Fadzli Bin Abdollah Muhammad Ilman Hakimi Chua Bin Abdullah Hilmi Bin Amiruddin Noreffendy Bin Tamaldin

Silver

4

Nur Rashid Bin Mat Nuri@Md Din Masjuki Bin Haji Hassan Jaharah Binti A. Ghani

3. International Conference and Exposition on Invention of Institutions of Higher Learning 2013 (PECIPTA 2013)

Nano-oil for a Greener Future Mohd Fadzli Bin Abdollah Muhammad Ilman Hakimi Chua Bin Abdullah Hilmi Bin Amiruddin Noreffendy Bin Tamaldin Nur Rashid Bin Mat Nuri@Md Din Masjuki Bin Haji Hassan Jaharah Binti A. Ghani

Silver

4. International Conference and Exposition on Invention of Institutions of Higher Learning 2013 (PECIPTA 2013)

Wireless Pneumatic Transmission Gear Shifter and Engine Ignition Starter and Stopper

Mohd Azman Bin Abdullah Mohd Ajwad Mohd Ahyak Muhammad Ali Imran Abd Hamid Noreffendy Bin Tamaldin Mad Nasir Bin Ngadiman

Bronze

5. UTeM Research and Innovation Expo 2013 (UTeMEX 2013)

Nano-oil as Effective Lubricant for Improving a Small Diesel Engine Performance

Mohd Fadzli Bin Abdollah Muhammad Ilman Hakimi Chua Bin Abdullah Hilmi Bin Amiruddin Noreffendy Bin Tamaldin Nur Rashid Bin Mat Nuri@Md Din

Gold

6. UTeM Research and Innovation Expo 2013 (UTeMEX 2013)

Emerging Lubrication Technology of Bearing Materials

Mohd Fadzli Bin Abdollah Mohd Afiq Azfar Bin Mazlan Hilmi Bin Amiruddin Noreffendy Bin Tamaldin Abdul Rafeq Bin Saleman Nor Azmmi Bin Masripan

Silver

7. UTeM Research and Innovation Expo 2013 (UTeMEX 2013)

Multi Wheels Nuts Remover Mohd Azman Bin Abdullah Muhammad Ali Imran Abd Hamid Mohd Ajwad Mohd Ahyak Noreffendy Bin Tamaldin Mad Nasir Bin Ngadiman

Silver

8. UTeM Research and Innovation Expo 2013 (UTeMEX 2013)

Wireless Pneumatic Transmission Gear Shifter and Engine Ignition Starter and Stopper

Mohd Azman Bin Abdullah Mohd Ajwad Mohd Ahyak Muhammad Ali Imran Abd Hamid Noreffendy Bin Tamaldin Mad Nasir Bin Ngadiman

Silver

9. UTeM Research and Innovation Expo 2013 (UTeMEX 2013)

Hybrid Dual Steering-H2S Noreffendy Bin Tamaldin Herdy Rusnandi Fauzi Bin Ahmad Abdurahman Dwijotomo

Bronze

10. Research, Invention, Innovation and Design Exhibition and Competition (RIID2013)

Uninterrupted Portable Power Supply (UPPS)

Mohd Azman Bin Abdullah Muhammad Ali Imran Abd Hamid Muhd Faiz Haikal Abdul Halil Noreffendy Bin Tamaldin

Gold

11. Research, Invention, Innovation and Design Exhibition and Competition (RIID2013)

Multi Wheel Nuts Remover Mohd Azman Bin Abdullah Muhammad Ali Imran Abd Hamid Mohd Ajwad Mohd Ahyak Noreffendy Bin Tamaldin Mad Nasir Bin Ngadiman

Silver

5

12. Research, Invention, Innovation and Design Exhibition and Competition (RIID2013)

Wireless Pneumatic Transmission Gear Shifter and Engine Ignition Starter and Stopper

Mohd Azman Bin Abdullah Mohd Ajwad Mohd Ahyak Muhammad Ali Imran Abd Hamid Noreffendy Bin Tamaldin Mad Nasir Bin Ngadiman

Silver

13. Malaysia Technology Expo 2014 (MTE2014)

Emerging Lubrication Technology for Ball Bearings

Mohd Fadzli Bin Abdollah Hilmi Bin Amiruddin Abdul Rafeq Bin Saleman Noreffendy Bin Tamaldin Nor Azmmi Bin Masripan

Bronze

14. Bio Innovation Awards 2014

Prototype of An Innovative Cooking Method For Palm Sugar

Shamsul Anuar Shamsudin Rafidah Hassan Noryani Muhammad Noreffendy Tamaldin Tengku Ezura Tengku Mansor Nur Sarah Amirah Abdul Razak Fatin Zanariah Zainuri

Bronze

15. Emerald Publishing Industrial Lubrication and Tribology 2017 Outstanding Paper Award

Effect of Hexagonal Boron Nitrite Nanoparticles as an Additive on the Extreme Pressure Properties of Engine Oil

Muhammad Ilman Hakimi Chua Abdullah Mohd Fadzli Bin Abdollah Noreffendy Bin Tamaldin Hilmi Bin Amiruddin Nur Rashid Mat Nuri

2017 Outstanding paper award

16. UTeMEX 2017 Low Cost HHO Flowmeter Noreffendy Tamaldin Ajat Sudrajat Ahmad Kamal Mat Yamin Mohd Shukri Yob Mohd Fadzli Abdollah Hilmi Amiruddin

Gold

17. UTeMEX 2017 New Biodiesel Extracted From Palm Oil and Waste Cooking Oil Feedstock

Mohd Fadzli Abdollah Noreffendy Tamaldin Lee Shing CHuan Hilmi Amiruddin Nor Azmmi Masripan Muhammad Aizat Md Alias Zulhilmi Abd Rashid

Silver

18. UTeMEX 2017 New Self Lubricating Antifriction Material Based on Palm Kernel Activated Carbon

Mohd Fadzli Abdollah Dayang Nor Fatin Mahmud Hilmi Amiruddin Nor Azmmi Masripan Noor Ayuma Mat Tahir Martini Mohmad Noreffendy Tamaldin

Silver

5. Bilangan dan no. pendaftaran Harta Intelek yang dihasilkan Quantity and registration number of Intellectual Property

1.CRLY00001905 (Copyright)-Emerging Lubrication Technology for Ball Bearings (granted)

2. CRLY00001906 (Copyright)-Emerging Lubrication Technology for Ball Bearings (granted)

3. CRLY00004439 (Copyright)-Agro-Waste for Sustainable Self Lubrication Materials (granted)

6. Bilangan sitasi dan nama jurnal Number of citation and name of journals : 217

7. Bilangan penerbitan dalam Jurnal Berimpak (scopus/ISI) Number of publication in high index journals : 40 Google H-Index = 8

6

7

Title Year

1. MF Abdollah, M.Mohmad, N.Tamaldin, H.Amiruddin, T.Tokoroyama, N.Umehara (2017) Frictional Properties Of Laser Surface Textured Palm Kernel Activated Carbon Reinforced Polymeric Composite, Proceedings of SAKURA Symposium on Mechanical Science and Engineering 2017, 14

2017

2. NAM Tahir, MFB Abdollah, N Tamaldin, H Amiruddin, T Tokoroyama, N.Umehara (2017) Potential Of Growing Graphene From Solid Waste Products, Proceedings of SAKURA Symposium on Mechanical Science and Engineering 2017, 26

2017

3. DNF Mahmud, MFB Abdollah, A Masripan, N Tamaldin, H Amiruddin (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study, Industrial Lubrication and Tribology, 00-00

2017

4. NAM Tahir, MFB Abdollah, N Tamaldin, H Amiruddin, MRB Mohamad Zin (2017) A Brief Review On The Wear Mechanisms And Interfaces Of Carbon Based Materials, Composite Interfaces, 1-23

2017

5. M.Mohmad, M. F. Abdollah, N.Tamaldin, H.Amiruddin, (2017) "The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite", Industrial Lubrication and Tribology, Vol. 69 Issue: 5, pp.768-774, https://doi.org/10.1108/ILT-05-2016-0121

2017

6. N Tamaldin, HIM Yusof, MFB Abdollah, G Omar, MIF Rosley (2017) Design Self-Balancing Bicycle, Proceedings of Mechanical Engineering Research Day 2017 2017, 160-161

2017

7. G Omar, SR Esa, N Tamaldin, NAB Masripan, S Jasmee (2017)The Formation Of Thermally Aged Stress Corrosion Cracking On Copper Oxide Surface Under High Temperature ,Proceedings of Mechanical Engineering Research Day 2017 2017, 401-402

2017

8. N Tamaldin, M Saifuddin, AKM Yamin, G Omar (2017) New Approach Of Designing Braking System For Electric Vehicle Using Artificial Intelligence, Proceedings of Mechanical Engineering Research Day 2017 2017, 53-54

2017

9. SC Lee, N Tamaldin, MFB Abdollah, (2017) Tribological Performance Of Low Blend Decanter Cake Biodiesel, Industrial Lubrication and Tribology 69 (3), 425-432

2017

10. N Tamaldin, SR Ruslan, AKM Yamin, AM Saad, MFB Abdollah,(2017) Development Of 3-Cylinder Composite Engine: Analysis On Strength And Fuel Efficiency, Proceedings of Mechanical Engineering Research Day 2017 2017, 50-52

2017

11. MIHC Abdullah, MFB Abdollah, H Amiruddin, N Tamaldin, NRM Nuri (2017)Tribological Effects Of Nano-Based Engine Oil Diluted With Biodiesel Fuel, International Journal of Surface Science and Engineering 11 (1), 12-22

2017

12. AFM Riduan, N Tamaldin, AKM Yamin, (2017) Engine Performance Testing Using Variable RON95 Fuel Brands Available In Malaysia, MATEC Web of Conferences 90, 0102

2017

13. NAM Shafie, MFM Said, AA Aziz, ZA Latiff, AKM Yamin, N Tamaldin (2017),Steady Flow and Dynamic Analyses Comparison of An Air Intake Breathing Capacity,MATEC Web of Conferences 90, 01067

2017

14. MIHC Abdullah, MFB Abdollah, N Tamaldin, H Amiruddin, NR Mat Nuri (2016),Effect of Hexagonal Boron Nitride Nanoparticles As An Additive on The Extreme Pressure Properties of Engine Oil,Industrial Lubrication and Tribology 68 (4)

2016

15. MS Rahmat, F Ahmad, AKM Yamin, N Tamaldin, VR Aparow, (2016) Simulation of Hybrid Electric Vehicle Based On A Series Drive Train Layout,Jurnal Teknologi 78 (6)

2016

16. N Tamaldin, F Harun, Y Humairak, MHM Husin, MFB Abdollah, (2016),Effect of storage duration on the fuel properties of different biodiesel blends,Proceedings of Mechanical Engineering Research Day 2016 2016, 27-28

2016

17. N Tamaldin, AS Mohamad, Y Humairak, MHM Husin, MFB Abdollah (2016),Experimental Investigation of Engine Performance And Emission For Biodiesel At Various Storage Conditions,Proceedings of Mechanical Engineering Research Day 2016 2016, 25-26

2016

18. MN Rosley, N Tamaldin, MF Abdollah, MZ Zakaria, M Yamin, A Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine

2016

19. LS Wahidin, CF Tan, SN Khalil, N Tamaldin, S Sivarao, J Hu,(2016) A Knowledge-Based Architecture Framework Of Design For Assemble System (DAEx)

2016

20. CF Tan, LS Wahidin, SN Khalil, N Tamaldin, J Hu, GWM Rauterberg (2016)The Application Of Expert System 2016

21. SR Esa, G Omar, R Yahya, N Tamaldin, A Hassan, B Abdul Rahim, (2016),Electron Microscopic Investigation on Nanostructure Behaviors of Thermal Oxidation Copper,Key Engineering Materials 694, 116-119

2016

22. M Razi, M Zakwan, MF Abdollah, M Nuri, N Rashid, H Amiruddin, N.Tamaldin (2016),Friction Properties of Waste Cooking Oil with Banana Peel Broth,Advanced Materials Research 1133, 579-582

2016

23. HC Abdullah, M Ilman, MF bin Abdollah, H Amiruddin, N Tamaldin, M Nuri, (2016)Effect of Diluted Nano-Oil on the Anti-Wear and Friction Properties,Advanced Materials Research 1133, 452-456

2016

24. ADLI ZIL IKRAM Abdullah, Mohd Fadzli bin Abdollah, Boon Tuan Tee, HILMI Amiruddin, Mat Yamin, Ahmad Kamal, Noreffendy Tamaldin (2016)Thermal Conductivity and Latent Heat Properties of Microencapsulated Phase Change Material (μPCM)/Multiwall Carbon Nanotube (MWCNT) Composites for EVs Application, Advanced Materials Research 1133, 131-135

2016

25. MIHC Abdullah, MFB Abdollah, H Amiruddin, N Tamaldin, NRM Nuri (2016)The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil,Mechanics & Industry 17 (1), 104

2016

26. M Abdullah, MFB Abdollah, H Amiruddin, N Tamaldin, NRM Nuri (2017)Evaluations of piston ring wear using nano hexagonal boron nitride lubricant additives in small diesel engine,Proceedings of Malaysian International Tribology Conference 2015 2015, 192-193

2015

27. M Abdullah, MFB Abdollah, NRM Nuri, H Amiruddin, N Tamaldin (2015) Comparison of the frictional properties of nano-oil and SAE 15W40 oil diluted with biodiesel fuel Proceedings of Malaysian International Tribology Conference 2015 2015, 190-191

2015

8

28. N Tamaldin, MFB Abdollah, H Amiruddin, AKM Yamin, HH Masjuki (2015) Review of biodiesel standard development in Malaysia Proceedings of Malaysian International Tribology Conference 2015 2015, 187-189

2015

29. N Tamaldin, MFB Abdollah, H Amiruddin, MA Abdullah, MT Taib (2015) Tribological impact of CI engine piston rings under different blend ratio biodiesel Proceedings of Malaysian International Tribology Conference 2015, 25-26

2015

30. Yusof, H., Tamaldin, N., Abdollah, M.F.B., Khalid, A. (2015) Evaluation of the storage effect on the fuel properties for variety biodiesel blends, ARPN Journal of Engineering and Applied Sciences

2015

31. Ahmad, MH; Tamaldin, N; Yamin, AKM; Lee, SC,(2015) Experimental Validation of Single Cylinder Diesel Engine Using Engine Simulation Tools, Mechanical Engineering Research Day,MERD2015, Scopus, ISBN: 9789670257518

2015

32. Abdullah, M.I.H.C., Fadzli Abdollah, M., Amiruddin, H., Tamaldin, N., Mat Nuri, N.R. (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil, Jurnal Teknologi (Sciences and Engineering)

2014

33. Abdollah, M.F., Mazlan, M.A.A., Amiruddin, H., Tamaldin, N. (2014) Experimental Study On Friction And Wear Behaviors Of Ball Bearings Under Gas Lubricated Conditions, Jurnal Teknologi (Sciences and Engineering)

2014

34. Mat Yasin, M.H., Mamat, R., Leman, A.M., Khalid, A., Tamaldin, N. (2014) Experimental Investigation On Biodiesel-Ethanol-Diesel Blends Operating With A Diesel Engine, Applied Mechanics and Materials

2014

35. Tan, C., Khalil, S.N., Tamaldin, N., Chen, W., Rauterberg, G.W. (2014) A Knowledge-Based Industrial Robot Selection System For Manufacturing Industries, International Review of Mechanical Engineering

2014

36. Abdullah, M.A., Tamaldin, N., Ramli, F.R., Sudin, M.N., Mu’in, M.A.M. (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV) , Applied Mechanics and Materials

2014

37. Abdullah, M.I.H.C., Abdollah, M.F.B., Amiruddin, H., Hassan, M., Rafeq, S.A. (2014) Effect of hBN/Al2O3 Nanoparticles On Engine Oil Properties, Energy Education Science and Technology Part A: Energy Science and Research

2014

38. Abdullah, M.I.H.C., Abdollah, M.F.B., Amiruddin, H., Hassan, M., Rafeq, S.A. (2014) Improving Engine Oil Properties By Dispersion Of Hbn/Al2O3 Nanoparticles, Applied Mechanics and Materials

2014

39. Nasir, M.Z.M., Dwijotomo, A., Abdullah, M.A., Tamaldin, N. (2014) Development Motor Control Unit For Electronic Steering System Test Rig, Proceedings -IEEE 10th International Colloquium on Signal Processing and Its Applications, CSPA

2014

40. Abdullah, M.A., Tamaldin, N., Ramli, F.R., Sudin, M.N., Mohamed Muslim, A.M. (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV), Applied Mechanics and Materials

2014

41. Kadir, F.A.A., Tamaldin, N., Ayob, M.R., Hudha, K., Yamin, A.K.M. (2014) Vehicle Speed Control Using Gain Scheduling PID With Experimental Throttle-In-The-Loop, International Review on Modelling and Simulations

2014

42. Rahmat, M.S., Fauzi, A., Mansor, M.R., Yamin, A.K.M., Tamaldin, N. (2014) Design And Development Of Light Weight Engine Mounting For Utem Formula Varsity Race Car, Applied Mechanics and Materials

2014

43. Abdullah, M.A., Mansur, M.R., Tamaldin, N., Thanaraj, K. (2013) Development Of Formula Varsity Race Car Chassis IOP Conference Series: Materials Science and Engineering

2013

44. Abdullah, M.A., Tamaldin, N., Rusnandi, H., Manoharan, T., Samsir, M.A. (2013) Development And Modification Of A Single Overhead Camshaft 4-Valve 4-Stroke 135 Cc Formula Varsity Race Car Engine, IOP Conference Series: Materials Science and Engineering

2013

45. Rahmat, M.S., Ahmad, F., Yamin, A.K.M., Aparow, V.R., Tamaldin, N. (2013) Modelling And Torque Tracking Control Of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles, International Journal of Automotive and Mechanical Engineering

2013

46. Tamaldin, N., Yamin, A.K.M., Abdollah, M.F.B., Amiruddin, H., Abdullah, M.A. (2013) Design Optimization Of Thermal Management System For Electric Vehicle Utilizing CFD Analysis, DFMEA And CES, Procedia Engineering

2013

9

8. Keahlian Dalam Pertubuhan/Badan Profesional Membership in The Association/Professional Body

• Ahli MCED (Malaysian Council of Engineering Dean) April 2013-April 2017

• Graduate member, Board of Engineers Malaysia, MALAYSIA (2002 ~ to date) BEM reg no 37951

• Graduate Member, Institutions of Engineers Malaysia registered since Jan 2013 IEM reg G58068

• Malaysian Tribology Society (MyTribos) registered since Jan 2013 reg no L0113

• Member to Malaysian Powder Metallurgy and Particulate Materials Association, MPM2A- member no 0070

• Imeche member UK reg # 80274749

• American Society of Mechanical Engineers- Associate member 2000

• Pi Tau Sigma (Honor Society) Since 2000

• Senior Consultants KKTM Kuantan Automotive Module (2011 – 2013)

• Senate Member- Universiti Teknikal Malaysia Melaka (2013 – 2017)

• Special Committee Human Reseource Planning UTeM Autonomy Audit (2013 – 2014)

• Technical Committee UTeM Intellectual Properties 2014-2015

• Special Committee- UTeM Academic Award-Journal Publications 2014

• Jury Panel for Melaka International Intellectual Exposition 2015 exhibition-MIIEx2015, 8-9 Dec 2015, UiTM Alor Gajah.

9. Senarai Penyeliaan Pelajar Pasca Siswazah(Sila senaraikan nama pelajar,tajuk dan peringkat pengajian semenjak 2005) Supervisor for postgraduate students 2005-2009 (Please list their names, project title and status) 1. Mohd Hafidz bin Zakaria (Main Supervisor-MSc by Research), ”Active Front Wheel Steering Control for Yaw

Disturbance Cancellation”, Completed Sep 2014, Awarded Konvo-10 UTeM, 27 Sep 2014 .

2. Mohd Hafiszudin Ahmad, (Main Supervisor-M.Eng by Taught Course)-“ Experimental Validation of Single Cylinder Diesel Engine for Improved Engine Performance and Emission“Completed Sep 2015 , Awarded Konvo-11 UTeM, 3 Oct 2015,

3. Muhammad Luqman Hakim Abdul Rahman (Co Supervisor-MSc by Research),” Development Of Electronic Wedge Brake (EWB) System”, Completed Sep 2015, Awarded Konvo-11 UTeM, 3 Oct 2015

47. Abdullah, M.I.H.C., Abdollah, M.F.B., Amiruddin, H., Tamaldin, N., Nuri, N.R.M. (2013) Optimization Of Tribological Performance Of Hbn/AL2O3 Nanoparticles As Engine Oil Additives, Procedia Engineering

2013

48. Nazri, Z.H., Rody, M.Z.M., Abdollah, M.F.B., Tamaldin, N., Masripan, N.A.B. (2013) Elastohydrodynamics Lubrication For Bio-Based Lubricants In Elliptical Conjunction, Procedia Engineering

2013

49. Khalid, A., Tamaldin, N., Jaat, M., Manshoor, B., Zaman, I. (2013) Impacts Of Biodiesel Storage Duration On Fuel Properties And Emissions, Procedia Engineering

2013

50. Mohd Azman. Abdullah, Noreffendy. Tamaldin, Muhammad Khatib. Abdul Aziz, Ahmad Fadhli. Munawar, and Mad Nasir. Ngadiman, Increasing the Tire Life Span by Means of Water Cooling, Proceeding for International Conference on Manufacturing and Industrial Engineering (ICMIE’12), International Scientific Academy of Engineering & Technology (ISAET), Kuala Lumpur, Malaysia, (December 29th to 30th, 2012), Vol. 1, 89-91, 2012.

2012

51. Tamaldin, N. and Abdollah, M.F.,Proposal for hybrid passive cooling system of batteries in electric vehicle, Proceedings of The 3rdInternational Conference on Engineering and ICT 2012 (ICEI2012), Melaka, Malaysia, 4~6 April 2012.

2012

52. N. Tamaldin, A. Dwijotomo, Vision Based Lane Detection For Automatic Steering Support System. Proceedings of The 3rdInternational Conference on Engineering and ICT (ICEI2012),Melaka, Malaysia, 4 – 6 April 2012

2012

53. N. Tamaldin, M. A. Dzulkifli and R.Mamat, Investigation Of Engine Performance And Emission Level of Si Engine Running With Different Ron Fuel Grades, Proceeding of the 3rd International Conference on Engineering and ICT (ICEI2012), Melaka, Malaysia, 4 – 6 April 2012

2012

54. M.F. Abdollah, N. Tamaldin, H. Amiruddin, M.M. Zamberi, M.R.M. Zin, S.E.M. Kamal, Tribology related researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Proceedings of the Malaysia-Japan Tribology Meeting 2012, Kuala Lumpur, Malaysia, 27-28 August 2012.

2012

55. K. Hudha, M. H. Zakaria, N. Tamaldin (2011)-Hardware In The Loop Simulation Of Active Front Wheel Steering Control For Yaw Disturbance Rejection, International Journal of Vehicle Safety (IJVS). Inderscience Publishers, Vol. 5, No. 4, 2011. ISSN 14793105(Impact Factor tier 4)

2011

56. A.J. Alimin, N. Tamaldin, R. Mamat,(2011)-Strategic Research Partnership on Automotive Powertrain & Fuels in Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka & Universiti Tun Hussein Onn Malaysia, Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011)

2011

57. Mamat, R., Abdullah, N. R. and Tamaldin, N.,Emissions of a Single Cylinder Diesel Engine Operating with Ethanol, “Engineering Mechanics & Transport 2010” (EMT-2010), LVIV,Ukraine, 25-27 November 2010.

2010

58. Tamaldin, N., Roberts, C.A. and Benjamin, S.F., Experimental Study of SCR in a Light-duty Diesel Exhaust to Provide Data for Validation of a CFD Model using the Porous Medium Approach, SAE 2010-01-1177,SAE 2010 World Congress & Exhibition,SAE 2010 World Congress & Exhibition, Detroit, MI, USA, Session: Diesel Exhaust Emission Control: SCR, April 2010.DOI: 10.4271/2010-01-1177

2010

10

4. Abdurrahman Dwijotomo (Main-Supervisor-MSc by Research), “Vision Based Lane Detection for Automatic Steering Support System”, Completed Sep 2015, Awarded Konvo-11 UTeM, 3 Oct 2015

5. Azhar Ibrahim, (Main Supervisor-M.Eng by Taught Course)-“Antilock Braking System Using Fractional Gain PID Controller”, Completed Sep 2016, Awarded Konvo-12 UTeM, 14 Nov 2016

6. Mohd Rozaini Md Nafiah, (Main Supervisor-M.Eng by Taught Course)-“Experimental Investigation of Top Cpmpression Piston Ring Morphology fo Hydrogen Enrichment Diesel Engine”, Completed Sep 2016, Awarded Konvo-12 UTeM, 14 Nov 2016

7. Mohd Nazry Rosley (Main Supervisor-MSc by Research),” Hydrogen enrichment in diesel engine for improved fuel economy and emission reduction”, Completed, in Oct 2017, Konvo 13 UTeM, Nov 2017.

8. Humairak Mohamad Yusof (Main Supervisor-MSc by Research),” An effect of storage method and variant temperature on Bio-diesel Properties, Combustion Characteristics and Emission”, Completed, in Oct 2017, Konvo 13 UTeM, Nov 2017

9. Faizul Akmar Abdul Kadir, (Main Supervisor-Phd by Research), “Vehicle longitudinal dynamics control for stability and safety enchancement”, VIVA completed in June 13,2017, in correction stage.

10. Noor Afandy Abas (Main Supervisor-MSc by Research),” Cylinder Deactivation Strategies for Hybrid Vehicle in Improving Fuel Economy and Exhaust Emission”, waiting for VIVA.

11. Lee Shing Chuan (Main Supervisor-MSc by Research,)”Experimental of engine performance and emission of Biodiesel extract from waste Materials’, this student is currently enrol for 2015/2016 session.

12. Aizuddin Fahmi bin Mohd Riduan (Main Supervisor-MSc by Research,)”Correlation Of Ron 95 & Ron 97 Grade Fuel Properties To Engine Performance And Emission, this student is currently enrol for 2015/2016 session.

13. Mohd Zakaria Mohd Nasir (Co-Supervisor-PhD by Research,) ‘’Vehicle longitudinal dynamics control for stability and safety enchancement’’, this student is currently enrol for 2015/2016 session.

14. Fadhil Abdulameer Sachit Al Darraji –P041610002 (Main Supervisor-Phd by Research) –Solar PVT system based on active water. Student currently enrol for 2016/17 session.

15. Ajat Sudrajat P041610003 (Main Supervisor-Phd by Research) –Hydrogen Based Renewable Energy Characterization . Student currently enrol for 2016/17 session

16. Amira Lateef Abdullah, (Main Supervisor) Phd by Research, Construct An Improved Grabbing Device for Individual With Minor Disabilities.

11

10. Senarai External / Internal Examiner /VIVA Chairman Post Graduate Student 1. Taib, M.,M.(2011)- External Examiner M.Sc., UTHM-Experimental Investigation on the Feasibility and Durability Study of a Novel Diesel Particulate Filter. 2. Iskandar Meran (2013)- Internal Examiner. MSc. UTeM-A Study On The Performance Of A Single Cylinder Spark Ignition Internal Combustion Engine Fuelled By Liquefied Petroleum Gas. 3. Mohammad Javad Nekooei (2015) External Examiner Phd, UTM-Combustion Modeling and Exhaust Emission Control by Fuzzy Logic Applied to Internal Combustion Engines. Nov 24,2015 4. Basirom, I. (2016) External Examiner MSc, Unimap-Mechanical Behaviour of Adhesively Bonded T-Joint at Elevated Temperature. March 4, 2016. 5. Suardi, M. (2016) External Examiner MSc, UTHM-Rapid Pre Mixing Fuel-Water Injector in Burner Combustion, Apr 17,2016. 6. Hazim Sharudin (2016) External Examiner MSc UiTM Shah Alam - The Effect Of Iso-Butanol Additive In Methanol-Gasoline Blends On Engine Performance And Exhaust Emission Using Spark Ignition Engine. May 16,2016 7. Ali Ghanaati (2016) External Examiner PhD UTM – Real Time Fuel Octane Number Identification Using Soft Computing for Adaptive Spark Ignition Control, May 29,2016 8. Abdul Muhaimin Mohd Shafie (2016) Internal Examiner MSc UTeM - Analysis of Intake Flow in The Combustion Chamber of L-Head Engine Type. June15, 2016 9. Mohammad Javad Nekooei (2017) External Examiner Phd, UTM-Air Fuel Ratio Control by Hybrid Fuzzy Logic Controller. Jan 15,2017. 10. Siti Nazirah binti Zamri (2017) External Examiner MSc Unimap, Modelling of GRE Composite Pipes Under Multiaxial Loadings. 11. Md Ruhul Amin (2017) External Examiner MSc UM, Production Process Optimization And Combustion Evaluation Of Aphanamixis Biodiesel Blend In A Diesel Engine. 12. Husna binti A.Hamid (2017) Internal Examiner PhD UTeM, Physiochemical Evaluation and Tribological Properties of ECO Friendly Biodegradable Novel Biolubricant from Banana Peel Wastes. 13. Izzarief bin Zahari (2017) External Examiner MSc UTM, Experimental and Simulation Study on Intake Airflow Optimization on Cylinder Deactivation Engine. 14. Muhammad Syarifuddin Mohamed Zaharin (2017) External Examiner MSc UiTM Shah Alam, Effects of Iso-Butanol Additives in Ethanol-Gasoline Blended on Engine Performance and Exhaust Emissions of A multi Cylinder Spark Ignition Engine. 15. Nur Hidayah Bintin Mohd Razif (2017) External Examiner MSc UiTM Shah Alam, Heat Transfer Analysis for Ammonia-Water Mixture Heat Exchanger of An Energy Recovery System. 16. Mostafa Mohebbi (2017) External Examiner PhD, UTM Skudai, Reactivity Controlled Compression Ignition In A Light Duty Diesel Engine Using Reactive Fuels.

Chairman VIVA Session

1. Siti Nurfaezah Zahari (2015) Chairman, VIVA session MSc- Feasibility Study of Artificial Disc Replacement Prostheses for Degenerative Disc Disease – March 2015

2. Nurulhilmi Zaedah binti Nasir (2016) Chairman VIVA MSc – Fatigue Reliability & Fracture Toughness of Aluminum Alloy for Automotive Structural Components, Apr 11,2016

3. Manimaran A/L Selvam (2016) Chairman VIVA MSc - Characterization of Modified Shielded Metal Arc Welding with obtained Tubular Welding Electrode for Sustainability, 10 Aug 2016

4. Mohd Redzuan bin Abu Bakar (2017) Chairman VIVA MSc – Optimizing Composite Spoiler To A Coreless Design Concept Using Finite Element Analyses, May 26,2017

12

11. Journal/Conference/Book/Chapter Reviewer

1. International Journal of Modelling, Identification And Control (http://www.inderscience.com/ijmic) International Journal of Modeling, Identification and Control (IJMIC), 2010 Inderscience Publishers, UK.

2. International Conference on Mechanical Engineering Research (ICMER 2011),Dec 2011 Kuantan Pahang, Malaysia 3. The 3rd International Conference on Engineering and ICT (ICEI2012), Melaka, Malaysia, April 2012

4. The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013) April 2013, 5. UTM Skudai, Johor Bahru. 6. The Malaysian International Tribology Conference 2013 (MITC2013) K.Kinabalu, Sabah Nov 2013 7. Scientific Research and Essays www.academicjournals.org/SRE 8. Jurnal Teknologi, Penerbit UTM Press, www.jurnalteknologi.utm.my, 9. Journal of Mechanical Engineering Research Reviewer,2014 http://www.academicjournals.org/journal/JMER 10. Handbook of Plain Bearing Translation – Malaysian Tribology Society -Mytribos 2014 11. Chapter in Book Reviewer, Hydrogen production plant from ocean Thermal Energy , UTM 2014 12. National Postgraduate Conference on Mechanical and Manufacturing Engineering (NPCMME 2014), Feb 19 - 20, 2014

in Morib, Selangor, Malaysia. http://www.npcmme.org/

13. Translator of Plain Bearing Handbook, Malaysian Tribology Society, (MYTRIBOS), Japan Plain Bearing Standard Association (JPBSA) and Malaysia-Japan International Institute of Technology (MJIT) March 2014.

14. Reviewer Special Issue in Jurnal Teknologi-TMAC Symposium 2016 (E ISSN 2180-3722) 15. Editorial Board, A R Research Publication & Conference World 2017-2020 Refn No CW/2017/394

12. Invited Speaker

1. Smart Automotive Climate Control 2012, Wiesbaden Germany, 22-24 October 2012 2. Program Hari Innovasi, Kolej Komuniti Wilayah Melaka dan Negeri Sembilan, October 2012 3. Program Hari Innovasi, MRSM Kem Terendak, Melaka, Proton EV Design, 8 August 2012 4. DFMA Course- EFGO Scientific Sdn Bhd- to R&D and New Product Engineers at Inari Technology Sdn. Bhd, June 2012 5. Seminar Hybrid Technology in Malaysia, Challenges in Handling and Maintenance, ADTEC Melaka 28 May 2014 6. Keynote speaker, Automotive Hybrid Technology Seminar 2014. ILPKL, August 2014. 7. Invited Speaker, Tribological impact of CI engine piston rings under different blend ratio biodiesel. MITC 2015, Penang

14-16 Nov, 2015. 8. Invited Speaker, Malaysia Japan International (MJIT) Symposium on Tribology Technology 2016, Current and Future

Trends of Bio-Diesel In Malaysia, 4 Feb 2016. 9. Invited Speaker, MRSM Terendak, Alumni-Majlis Program Gemilang Pelajar SPM 2016, 22 Feb 2016 10. Invited Speaker, MRSM Terendak, Motivation Program NLP for-PT3 student 2016, 15 Aug 2016 11. Keynote speaker–APSIM2016 (International Conference on Advanced Processes & Systems in Manufacturing 2016)-

“Tribological Integration of Nano Lubricants in Engine Performance Testing”, 30 Aug 2016- The Everly Hotel,Putrajaya, Malaysia

13. External Examiner / Academic Program Development 1. Curriculum development for Bachelor of Mechanical Engineering (Automotive) with Honours UTeM –since 2004 2. Curriculum development for Bachelor of Mechanical Engineering Technology (Automotive Technology) with

Honours-UTeM Technology program 2010-2011 3. Curriculum advisor for Bachelor of Mechatronics Engineering- Faculty of Electrical Engineering, UTeM 2004 4. Curriculum Development for Diploma in Manufacturing Engineering (Automotive Design) KKTM Kuantan 5. Final Examination Reviewer for KKTM Kuantan-Diploma in Manufacturing (Automotive Design) -2012 6. Automotive Equipment Consultant, KKTM Kuantan, 2012-present 7. OBE Advisor for MQA curriculum review-Diploma Automotive Technology, Adtec Melaka, 2012 8. External Examiner for Diploma in Automotive Technology, Kolej Negeri Chedang, Seremban, N.Sembilan, 2014-

Present 9. Member Board of Studies- Mechanical-Automotive Engineering Program for Kuliyyah of Engineering, IIUM Dec

2014-Nov 2016 10. Curriculum Validation Panel- Diploma Automotive Technology (Commercial Vehicle) Kolej Kommunity, JPKK Putrajaya June 28,2016 11. Academic Advisory Panel for Kolej WIT Sdn Bhd, Klang Selangor since Jan 2016