7/21/2019 Kreiranje DWF File

http://slidepdf.com/reader/full/kreiranje-dwf-file 1/4

 

To create a DWF file

in AutoCAD:

First open the DWG

file in AutoCAD and

click “file” on theupper menu bar, then

select “Plot”.

1st select DWF printer

7/21/2019 Kreiranje DWF File

http://slidepdf.com/reader/full/kreiranje-dwf-file 2/4

 

Select the appropriate

sheet size.

 Next define the printable area around

your file.

Also, select theappropriate scale and

drawing units within

the “plot scale” box, in

lower right side of plot panel.

7/21/2019 Kreiranje DWF File

http://slidepdf.com/reader/full/kreiranje-dwf-file 3/4

 

Use the preview

 button in lower leftcorner, to view you

file.

Within the preview

check to see if

anything is cutoff,or too big,

orientation is

correct, etc.

Hit “Esc” on the

keyboard to go back to the plot

 panel.

7/21/2019 Kreiranje DWF File

http://slidepdf.com/reader/full/kreiranje-dwf-file 4/4

 

Once;

Printer: DWF

 Name is determinedScale is set

Paper size is setPlot area is defined

Preview was good

Then;

Select “OK”

If you did not name

your file yet, please

do. Jeffcoat is not

responsible for jobswhich are out-of-

order because you

neglected to nameyour files correctly.

Help us make your project print

 properly.

These instructions are intended for the strict use of creating DWF files for Jeffcoat

Blueprint only, and any coping or unauthorized use is prohibited.