Korvet K SAP Jan 2008 Rev02 ENG
-
Upload
pavel-chernov -
Category
Documents
-
view
215 -
download
0
Transcript of Korvet K SAP Jan 2008 Rev02 ENG
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
1/7
General technical review
Name of the document
KORVET JSC
KSAP
Doc. Rev / DatedPage
OK/15082 / 06.02.091
ESP cable sealing system
sealaroundpenetrator (KSAP)
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
2/7
General technical review
Name of the document
KORVET JSC
KSAP
Doc. Rev / DatedPage
OK/15082 / 06.02.092
I. ESP cable sealing description
Korvet K cable sealing system has number of advantages over conventionalproductssuchaspenetrators:
SAP
Simple design:
Safety:Easyinstallation:No cable cuttingrequired:
Cost effectiveness:
No electricalshorting:Workover:
KSAP does not require specially trained personnel for installationand can betestedupto 5000psi WP.
all versions ha quick pressure testports onlyone spanner isneeded
during installationin tubinghanger or tubinghead, thecable is left unharmed andtherefore nosplicingorepoxyworkisrequired.
significant procurement cost advantage over wellhead
penetrators.attubingheadbecauseofnoexcessiveconnections.
during workover operations only the rubber sleeves needs to bereplaced.
ve
In Russia & Caspian Sea region Korvet has more than 20 thousand of such installations.Systemisapproved byShellspecialists.
Working principle :
The gland screw (1) pressurizes the rubber sleeve (4) and insulated cable (3). The ballbearing (2)assures lowfrictionoperation.
Onnextpagesyou could see typical examplesofapplicationswithK system.SAP
1
2
3
4
5
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
3/7
General technical review
Name of the document
KORVET JSC
KSAP
Doc. Rev / DatedPage
OK/15082 / 06.02.093
II. Wellhead design: eccentric tubing hanger
Typical application for safe BOP removing. Replacing penetrator with K allows tosave rig time, money at completion/workover and to avoid of electric shortcuts atproducing and it removes with the usual issues of cable shorting at the producingwellhead.
SAP
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
4/7
General technical review
Name of the document
KORVET JSC
KSAP
Doc. Rev / DatedPage
OK/15082 / 06.02.094
III. Wellhead design: suspending tubing head adapter
Mainlyused in FormerSovietUnioncountrieswith wellheadsforESPproduction: whereBOP removal allowed without double barrier rule. K confirms the seal quicklyandeffectivelyatcompletion and aspart ofplannedmaintenance scheme.
SAP
Quick pressuretest port
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
5/7
General technical review
Name of the document
KORVET JSC
KSAP
Doc. Rev / DatedPage
OK/15082 / 06.02.095
IV. Wellhead design: conventional ESP wellhead
Typical application for well conversion from natural flow to ESP. Safe BOP removing.Quickpressure test ports forcable sealing on hanger. Replacing penetrator with K
will save rigtime, atcompletion andworkovers. It will enhance site safetyby preventingelectric joint and associated shorting at the wellhead. To be supplied together withconversional wellhead. This design is lower cost alternative to expencive conversionpenetrators.
SAP
Quick pressuretest port in a
tubing hanger
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
6/7
General technical review
Name of the document
KORVET JSC
KSAP
Doc. Rev / DatedPage
OK/15082 / 06.02.096
V. Pictures from oilfield
Energizing KSAP
Running tubing hangertrough BOP with KSAP
KSAP after pressuretest & removal of BOP
-
8/14/2019 Korvet K SAP Jan 2008 Rev02 ENG
7/7