Kop-Flex KD disc couplings reduce overall operating costs... period. With nowearing parts or lubrication required, Kop-Flex KD couplings dramatically reducecoupling maintenance, so you can focus on other mill concerns. No more late nightphone calls about gear coupling failures due to lubrication – with your new Kop-FlexKD couplings, it’s possible to inspect the flexible discs without shutting down yourequipment – a feat not possible with gear couplings.

Proven Cost SavingsAt one paper mill working with Kop-Flex, the labor cost per shaft was calculated at$600 per year with an additional $87 per year allocated toward grease and O-ringsfor existing gear couplings. With 144 gear couplings in service at the mill betweentwo lines, a complete interchange to KD couplings could yield a savings of $98,928per year in maintenance costs.

Maximize ROI with KD Disc CouplingsBy accounting for labor rates, maintenance costs, maintenance schedules and requiredparts and lubricants, your Kop-Flex representative can demonstrate the ROI resultingfrom changing-out gear to disc couplings in your mill.

Additional Savings OfferFor a limited time, get 20% off on any KD coupling that replaces a competitor’scoupling.

For product informationwww.kop-flex.com410-768-2000

®

®

Choose Kop-Flex KD Couplings

www.kop-flex.comKop-Flex, Inc.P.O. Box 1696

Baltimore, MD 21203410-768-2000

Spacer Disc Coupling Interchange Guide

APPLICATION CONSIDERATIONSThe proper selection and application of power transmission products and components, including the related area of product safety, is theresponsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending uponthe use and application of such products and components. The scope of the technical and application information included in this publication isnecessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materiallyaffect the application and operating results of the products and components and the customer should carefully review its requirements. Anytechnical advice or review furnished by Emerson Power Transmission Corporation and its divisions with respect to the use of products andcomponents is given in good faith and without charge, and Emerson assumes no obligation or liability for the advice given, or results obtained,all such advice and review being given and accepted at customer's risk.

For a copy of our SSSSStttttananananandddddararararard Td Td Td Td Teeeeerrrrrms anms anms anms anms and Cd Cd Cd Cd Conononononddddditiitiitiitiitions oons oons oons oons of Sf Sf Sf Sf Salealealealeale, Dis, Dis, Dis, Dis, Disccccclllllaimeaimeaimeaimeaimerrrrrs os os os os of Wf Wf Wf Wf Warararararrrrrrananananantttttyyyyy, Limit, Limit, Limit, Limit, Limitaaaaatitititition oon oon oon oon of Lif Lif Lif Lif Liaaaaabbbbbiiiiilitlitlitlitlity any any any any and Rd Rd Rd Rd Reeeeemedmedmedmedmedyyyyy, , , , , please contactEmerson Power Transmission customer service, 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability applyto any person who may buy, acquire or use an Emerson Power Transmission Corporation product referred to herein, including any person whobuys from a licensed distributor of these branded products.

The Emerson logo is a trademark and a service mark of Emerson Electric Co.© Emerson Power Transmission Manufacturing, L.P. or affiliates 2007. All rights reserved.

Form #9034 • 2/07 • Printed in U.S.A.

The following trade names, trademarks and/or registered trademarks are used in this material by Emerson Power Transmission Corporation for comparison purposes only, are NOT owned or controlled byEmerson Power Transmission Corporation and are believed to be owned by the following parties: Falk, Thomas and Rexnord: Rexnord Industries, Inc.; TB Woods: TB Woods Incorporated.

While efforts have been made to confirm the information herein, Emerson Power Transmission Corporation cannot and does not represent or warrant the accuracy of this information.

xelF-poK xelF-poK xelF-poK xelF-poK xelF-poKDKDKDKDKDK ®®®®®

dronxeR/samohT dronxeR/samohT dronxeR/samohT dronxeR/samohT dronxeR/samohT ®®®®®

17seireS 17seireS 17seireS 17seireS 17seireSklaF klaF klaF klaF klaF ®®®®® DFDFDFDFDF

01A&13P 01A&13P 01A&13P 01A&13P 01A&13PsdooWBT sdooWBT sdooWBT sdooWBT sdooWBT ®®®®®

seireSFB seireSFB seireSFB seireSFB seireSFB

eziS eziS eziS eziS eziSeuqroT euqroT euqroT euqroT euqroT

).sbl.ni( ).sbl.ni( ).sbl.ni( ).sbl.ni( ).sbl.ni(

eroB.xaM eroB.xaM eroB.xaM eroB.xaM eroB.xaM).ni( ).ni( ).ni( ).ni( ).ni(obmuJ obmuJ obmuJ obmuJ obmuJ**buH **buH **buH **buH **buH

).ni(.D.O ).ni(.D.O ).ni(.D.O ).ni(.D.O ).ni(.D.O eziSeroB.xaM

).ni(buH.gL

).ni(.D.O eziSeroB.xaM

).ni().ni(.D.O eziS

eroB.xaM).ni(

buH.gL).ni(.D.O

2DK320 0541 00.2 45.3 051 83.2 95.3 02 52.2 64.3 A/N

2DK301 0172 57.2 13.4 571 57.2 61.4 03 57.2 20.4 51 83.2 56.3

02 57.2 91.4

2DK351 0887 00.4 96.5 522 52.3 49.4 04 573.3 48.4 33 52.3 39.4

003 00.4 79.5 83 00.4 00.6

02DK402 00063 26.4 26.6 053 05.4 57.6 05 521.4 97.5 34 05.4 77.6

573 00.5 26.7 06 526.4 45.6 84 00.5 26.7

214 13.5 00.8 07 52.5 65.7 35 31.4 00.8

02DK452 00025 26.5 88.7 264 00.6 00.9 58 52.6 28.8 85 36.4 00.9

36 31.5 00.01

02DK403 00098 05.6 52.9 215 96.6 30.01 59 57.6 18.9 86 36.5 00.11

265 13.7 79.01 501 05.7 57.01

02DK453 000051 26.7 57.01 006 18.7 27.11 511 05.8 39.11 37 05.6 57.21

217 52.9 88.31

02DK404 000512 57.8 00.21 008 83.01 65.51 80DF0052 88.5 58.01 A/N

80DF0613 00.7 31.21

02DK454 000552 83.9 00.31 578 83.11 21.71 A/N - - 87 05.7 03.51

02DK405 000063 05.7 21.41 8301 31.31 57.91 80DF0364 57.7 36.31 A/N

** Jumbo hubs to size 454.

Close Coupled Disc CouplingxelF-poK xelF-poK xelF-poK xelF-poK xelF-poK

01DK 01DK 01DK 01DK 01DKdronxeR/samohT dronxeR/samohT dronxeR/samohT dronxeR/samohT dronxeR/samohT ®®®®®

DR45 DR45 DR45 DR45 DR45klaF klaF klaF klaF klaF ®®®®® DFDFDFDFDF

01PDF 01PDF 01PDF 01PDF 01PDFsdooWBT sdooWBT sdooWBT sdooWBT sdooWBT ®®®®®

AD/AB AD/AB AD/AB AD/AB AD/AB

eziS eziS eziS eziS eziSeuqroT euqroT euqroT euqroT euqroT

).sbl.ni( ).sbl.ni( ).sbl.ni( ).sbl.ni( ).sbl.ni(eroB.xaM eroB.xaM eroB.xaM eroB.xaM eroB.xaM

).ni( ).ni( ).ni( ).ni( ).ni().ni(.D.O ).ni(.D.O ).ni(.D.O ).ni(.D.O ).ni(.D.O eziS

eroB.xaM).ni(

).ni(.D.O eziSeroB.xaM

).ni().ni(.D.O eziS

eroB.xaM).ni(

buH.gL).ni(.D.O

301 0004 05.1 49.3 521 91.1 96.3 02 31.1 64.3 33AB 57.1 96.4

03 26.1 20.4

351 00631 21.2 83.5 261 26.1 43.4 04 88.1 48.4 83AB 05.2 78.5

002 52.2 44.5 05 52.2 97.5

522 83.2 96.5

402 00063 26,2 83.6 262 57.2 26.6 06 26.2 45.6 34AB 36.2 07.6

213 83.3 18.7 07 00.3 65.7 13AD 83.3 18.7

053 57.3 96.8 53AD 57.3 96.8

452 00025 52.3 26.7 573 91.4 96.9 58 05.3 28.8 73AD 91.4 96.9

403 00098 57.3 00.9 524 05.4 05.01 59 00.4 16.9 24AD 05.4 05.01

054 57.4 13.11 501 05.4 57.01 54AD 57.4 13.11

453 000541 52.4 05.01 005 00.5 88.21 511 00.5 38.11 05AD 00.5 88.21

404 000512 57.4 57.11 A/N 521 00.6 93.31 55AD 05.5 44.41

454 000552 05.5 57.21 055 05.5 44.41 A/N 06AD 00.6 00.61

405 000063 57.5 88.31 006 00.6 00.61 A/N 07AD 00.7 52.81

007 00.7 52.81

Additional sizes available, please contact Kop-Flex for more details.