Kötőelem , csavar, katalógus
-
Upload
accord-plus-kft -
Category
Documents
-
view
321 -
download
29
description
Transcript of Kötőelem , csavar, katalógus
-
Koelner SA has been singled out in the prestigious FORBES report, Forbes
Diamonds 2009, as amongst the most dynamically developing Company.
The Management Board of the Warsaw Stock Exchange hereby certi es that Koelner
SA securities were listed on 30 November 2004, which entitles the Company to use the
logo of Listed Company.
In 2008, in the contest organized by Roland Berger Strategy Consultants under the auspices of the
European Business Summit and CNN, KOELNER SA was awarded the title of Best of European
Business in the Growth category.A company is chosen through the process of syn-thetic assessment taking into account diversi ed
quantitative and qualitative criteria. The best and the most ef cient European Compa-
nies are the winners.
Puls Biznesu counted KOELNER Com-pany among the Pillars of the Polish
Economy in 2008.
Pillars of the Polish Economy include medium-sized and large companies which
conduct their business activities in a clear and honest way, achieve excellent
nancial results, but at the same time are highly committed to society, and know how to react positively to the needs of the local
people.
In 2007 KOELNER SA received EuroCerti ca-te. The distinction is a signal to other entities that they are dealing with a responsible, and
highly esteemed partner on the market. Having successfully gone through a three-stage as-
sessment, conducted by law, management and accounting specialists, the company may then
say it is reliable and honest.
-
www.koelner.czwww.koelner.pl1
UNO universal plug with screw 15
FIX expansion plugs with ange and countersunk head screw
17
FIX expansion plugs with ange and hooks 17
FIX expansion plugs without ange and with countersunk head screw
18
FIX expansion plugs without ange and with hooks 18
FIX expansion plugs without ange and with coachscrew 18
KS universal expansion plugs with countersunk head screw 20
KS universal expansion plugs with hooks 20
LSB and LSM stair-tread xings 21
KPU washbasin xings 22
KPM WC- xings 22
Door stops ball shaped 23
KGS steel anchors for aerated concrete
23
FF1 frame xing 25
KDS, KD, KDT frame xings with long expansion zone 27
KKS, KKD, KKT frame xings with short expansion zone 29
WHS and WHO hardened screws 31
O metal frame anchors and masking caps 32
PU adhesive for foamed polystyrene 32
Primers 32
Foam Gun 32
RPC PU foam cleaner 32
RPS and RPP handheld and gun grade PU foams 33
Silicones 34
p.
GENERAL AND FRAME FIXINGS concret
e
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
2www.koelner.czwww.koelner.pl
FS bugle head drywall screws for metal 37
FT bugle head drywall screws for wood 37
FSC and FTC collated bugle head drywall screws 37
WS bugle head self drilling drywall screws 37
WS pan head self drilling drywall screws 37
FX hammer xing with steel nail
41
FX hammer xings with metric thread head connector screw 41
KMW Zn-Al alloy hammer xings with steel nail 42
KWD long expansion zone ham-mer xings with countersunk head and steel nail
43
DRA plasterboard xings 43
SM metal cavity xings 44
AT metal cavity xings setting tools 44
SPO spring toggles 45
BIGIPS cavity xings with coun-tersunk cross-head screw PZ2 and agle hook
45
KTS sleeve anchor with round hook 46
TMS brass anchor with round hook 46
SRS ceiling wire hanger 46
Z-KSP ceiling spring pin 47
GS ceiling wedge anchor 47
Hangers, channel connectors, angle sections, brackets, fasten-ers for suspended ceilings
47
Plaster & dry-wall beads 49
Thermal insulation beads 50
GKT tapes 50
PLASTER BOARD FIXINGS AND CONNECTORS
p.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
wood
pro
led sh
eet
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
plywo
od
steel
ITB
-
www.koelner.czwww.koelner.pl3
FACADE THERMAL INSULATION FIXINGS
p.
KI-10 xings 53
KI-10M xings 54
KI-10N xings 55
KI-10NS xings 56
TFIX-8M xings 57
KWL insulation holding ange 58
Facade insulation xings in bags 58
KC insulation ange with masking cap 59
MKI re resistant metal insulation supports
60
KIK xings
61
KES polysterene cap 61
KSF plastic cutter 61
Spacers 61
Plinth sections connector 61
HR sca olding hooks 61
HRK expansion plugs 61
Masonry connector 61
KWB hammer in wall ties 62
Expansion plugs for KWB wall ties 62
NKRK Expansion plugs with long expansion zone for KWB 62
KWK screw in wall ties 62
L type wall ties 63
MULTI type wall ties 63
Joint vents for cavity walls 63
Retaining clip with draining nozzle 63
Setting tool for KWB wall ties 63
conc
rete
brick
stone
cellu
lar b
rick
cera
mic
hollo
w br
ick
grav
elite
conc
rete
wood
plyw
ood
ETA
conc
rete
blo
cks
silica
te b
rick
hollo
w br
ick
hollo
w cla
y pot
light
conc
rete
block
s
aera
ted
conc
rete
chipb
oard
ITB
-
4www.koelner.czwww.koelner.pl
ROOFING INSULATION FIXINGSp.
GOK Plastic sleeve for xing insu-lations layers to at roofs 67
GOK-PLUS Plastic sleeve with an additional function of clamping to at roofs
67
Steel washer deep type 68
Steel washers at type 68
WO Self-tapping fastener to the plate max. 0.9 mm 70
WX Self-drilling fastener to the plate max. 2 x 1.25 mm
70
WB Self-drilling fastener
72
WW Fastener to wood substrates 72
WBT Self-tapping fastener for concrete 72
WCS Self-tapping fastener for concrete 72
K08L Expansion plug to the self-tapping fastener 73
Installation ends 73
SDS+ Drills for concrete 73
SDS Adapter for cone drill bit 73
G-WB080 Cone drill bit for concrete 73
PE Polyethylene insulation foil 73
Adapter bit 73
Fixing selector for appropriate thickness of roo ng insulation 74
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
www.koelner.czwww.koelner.pl5
FARMER self drilling screws with EPDM washer 77
Self drilling stitching screws with reduced drilling point to 2.5 mm Staples
78
EPDM washer 79
Closed-end waterproof aluminum blind rivets 79
OC type self drilling screws with drilling capacity up to 3 mm 81
OC type self drilling screws with drilling capacity up to 5 mm 81
OC type self drilling screws with drilling capacity up to 6 mm 81
OC type self drilling screws with drilling capacity up to 8 mm 81
ON and ONP type self drilling screws with drilling capacity up to 12 mm
83
Self drilling screws for xing the composite panels OC and ON 84
Wafer head screws zinc plated 86
EPDM washer 87
Sealing caps 87
Stainless steel self drilling screws with reduced drilling point to 2.5 mm STAPLES
88
Stainless steel self drilling screws with reduced drilling point to 3 mm STAPLES
88
OCS stainless steel self drilling screws with drilling capacity up to 6 mm
89
ONS stainless steel self drilling screws with drilling capacity up to 12 mm
90
OCS and ONS stainless steel self drilling screws for xing the com-posite panels
91
ODWS stainless steel self drilling screws for xing composite panels 92
Sealing of tile and trapezoidal sheets 93
Universal seals 94
Self-adhesive polyurethane sealing insulation tapes 94
Tools and accessories 94
SELF DRILLING FIXINGSp.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipw
ood
wood
pro
led sh
eet
ITB
-
6www.koelner.czwww.koelner.pl
PATron MX powder actuated tool 96
PATron MX powder actuated tool accessories 96
Strip cartridges 96
Single and stripe nails for concrete and steel 97
Grease for PATron MX
Cordless gas nailer SC 40; nails and fuel cells 99
Frame nailer WW90CH; nails and fuel cells 100
Nails and fuel cells for frame nailer WW90CH in cartons 100
Cordless gas 2nd x nailers and brads 101
Metal connector nailer 38 mm and nails 101
Industrial pneumatic strip framing nailer 102
Coil nailers 103
Nails for coil nailers 103
Oil compressors 104
SPIT powder actuated tools 105
Nails for SPIT tools 105
Cartridge disks for SPIT tools 105
SP-MAX Rebar tying tool 106
Accessories for SP-MAX tool 106
DIRECT FASTENING FIXINGS, TOOLS AND ACCESSORIES
p.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
www.koelner.czwww.koelner.pl7
R-CAS-V spin in capsule 115
R-HAC-V hammer in capsule (studding) 117
R-KEX Epoxy resin 119
R-KEM+ Styrene free polyester resin 121
R-KER Epoxy acrylate resin 123
R-KF2 Polyester resin 125
CFS Cartridge free dispensing system 127
RV200 Vinylester styrene free resin 300ml 128
RP30 Polyester resin 300 ml 130
RM50 Polyester styrene free resin 300ml 132
COPY-ECO Reinforcement system 134
Bonded anchor studs 135
Internally threaded sockets 136
Dispenser guns 136
Additional socket drivers and adaptors for SDS MAX
137
Mesh sleeves, blow pumps, caps, brushes 137
R-XPT, R-XPT-HD and R-XPT-A4 Throughbolts 139
R-HPT Troughbolt 141
Safetyplus 145
Rawlbolt 147
R-DCA and R-DCL wedge anchors 153
Setting tools for wedge anchors 154
SR and SRS throughbolts 155
KT and KTS sleeve anchors 157
Brass anchors 158
HEAVY DUTY ANCHORS p.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
8www.koelner.czwww.koelner.pl
Threaded rods 160
Hexagon studs connector 160
Zinc plated wafer head screws 160
Special countersunk at head hardened screws
161
Countersunk at head hardened chipboard screws
162
Hexagonal head coachscrews din 571
163
Decking screws 164
Stud screws zinc plated 164
Furniture screws 164
Common nails DIN 1151B 165
Masonry nails 165
Roo ng nails 165
Spiral shank nails DIN 68163A 166
Ring shank nails DIN 68163K 166
Ring shank timber nails 166
Roo ng nail washers 166
Galvanized fence staples 166
Chains 167
Steel ropes zinc plated
167
Plaited polypropylene ropes (coiled on reels)
167
Elastic ropes(Coiled on reels)
167
Ropes accessories 168
Tensioners 170
THREADED RODS, WASHERS, NUTS, SCREWS, NAILS, CHAINS, ROPES
p.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
www.koelner.czwww.koelner.pl9
WOOD CONNECTORS, POST BASES AND HINGES
p.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
D-BP Coiled strapping
173
D-WB, D-WC, D-WD Joist hangers 173
D-SP, D-SP-LP Rafter twist straps 175
D-LP Strap ties plus 176
D-PP Tie plates 176
D-LX, D-LA Perforated angle brackets 177
D-T T-shaped strap ties 177
D-LWG Strap ties 178 D-KB Unequal length angle brackets 178
D-ZK Equal length angle brackets L-shaped 179
D-ZU Universal angle brackets 179
D-MI, D-MK, D-KF, D-KP Equal length angle brackets 180
D-ZN Unequal length angle brackets plus 182
D-ZS Equal length brackets 135 plus 182
D-ZKR Adjustable angle brackets 183
D-I Anchor nails 183
D-ED Two-sided spiked plate 183
D-KN L shaped strap ties
184
D-MS Angle connector wide type 184
D-PD Batten roo ng strut 184
D-TB, D-TU Post base with base-plate 185
D-TC, D-TCR, D-TL, D-TA Post base with embedment rebar 185
D-TD, Hammer in post base 186
D-OP Pergola bracket 186
Hinges 187
-
10www.koelner.czwww.koelner.pl
UNO Universal expansion plugs 190
Frame xings 190
Drywall screws for steel and timber 191
Drywall screws self drilling 191
Hammer xings nylon 191
Rawlnut exi-plug 191
Tap-in 191
Nylon self drill 191
Plasterboard plugs 191
Intersets 191
Self-drilling Farmer screws with EPDM washers z/p 192
Wafer head screws electro zinc plated 192
Wafer head self drilling screws electro zinc plated 192
Window tting screws with co-untersunk head with self-tapping coarse thread z/p
192
Self-drilling window screws with countersunk head with self-tapping ne thread z/p
192
Pan head self-tapping screws for sheet metal with cross head 193
Fitting screw 193
Hardened chipboard Premium screws with countersunk head zinc plated
193
Decking screws 193
R-KEM+ Styrene free polyester resin 194
DIY RANGEp.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
www.koelner.czwww.koelner.pl11
Universal expansion plugs 195
FIX expansion plugs 196
Washbasin xing set 197
WC xing set 197
Stair tread xings 197
Frame xings 198
Hammer xings 199
Zamak hammer xings 199
Sleeve anchors 200
Metal frame anchors 200
Hardeners frame concrete screws
200
Expansion anchors 200
Fine thread drywall screws 201
Plasterboard xings 202
Metal cavity anchors 202
Plastic spring toggle 203
Spring toggle bolts 203
Hardened chipboard screws with countersunk pozi drive head PZ2 204
Wafer head screws 204
Self-drilling screws with EPDM washer 205
Self-tapping pan head screws for sheet metal, zinc plated
205
Angle and round screw hooks 206
Socket head furniture screw 206
Machine screws, zinc plated 206
DIY RANGEp.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
-
12
DIY RANGEp.
conc
rete
hollo
w blo
ckwo
rk
brick
plaste
rboard
plywo
od
steel
plasti
c she
et
ETA
aerat
ed co
ncret
e
stone
hollo
w bri
ck
chipb
oard
wood
pro
led sh
eet
ITB
Washers and nuts 209
Nails 207
Cable clips 209
Felt pads 209
Ball shaped door stops 209
Quick links 209
DIY sets 210
Hose clamps 210
Door latch 210
Steel anchors for aerated concrete 210
Pins 210
FIX expansion plugs 211
Hammer xings 211
Fine thread drywall screws 211
FIX plugs MIX 212
Hammer xings MIX 212
Nails MIX 212
-
General FixinGs
Gene
ral an
d fram
e fixi
ngs
G en e
r al a
n d f r
a me
f i xi n
g s
G en e
r al a
n d f
r am
e f i
x in g
s
G
e
n
e
r
a
l
a
n
d
f
r
a
m
e
f
i
x
i
n
g
s
Ge
ne
ra
l
an
d
fr
am
e
fi
xi
ng
s
G
e
n
e
r
a
l
a
n
d
f
r
a
m
e
f
i
x
i
n
g
s
G
e
n
e
ra
l
fi
x
in
g
s
-
14www.koelner.plwww.koelner.pl
Additional elements prevent spinning in the hole
2
Anti-rotational fins
3
Unique zigzag design, offering instant secure plug expansionthroughout the entire length
4
Additional grip feature
Optimal internal design provides an even expansion and fixing leading the screw through the plug
5
6
Expands at top giving instant grip
1
Description:Universal plug made of high quality polypropylene or nylon. Suitable to use in every kind of substrate. Cleverly designed an inventive packag-ing helps to choose the right drill and screw size for plug installation.UnivErSAl plUg
UNO
General FixinGsGeneral FixinGs
-
www.koelner.plwww.koelner.pl15
General FixinGs
UnivErSAl plUg
Product codemm mm pcs. pcs.
Uno-05+330 5 3.530 100 2400Uno-06+430 6 4.030 100 2400Uno-06+435 6 4.035 100 2400Uno-06+445 6 4.045 100 2400Uno-08+435 8 4.535 100 2400Uno-08+450 8 4.550 100 2400Uno-08+560 8 5.060 100 1800Uno-10+540 10 5.040 100 1200Uno-10+650 10 6.050 100 1200Uno-10+660 10 6.060 100 1200
Product codePolyprolylen
Product codenylon (grey) mm mm mm pcs. pcs.
Uno-k-05 r-Uno-n-05 5 24 3.0-4.5 200 4800Uno-k-06 r-Uno-n-06 6 28 3.5-5.0 200 4800Uno-k-07 - 7 30 4.0-6.0 100 2400Uno-k-08 r-Uno-n-08 8 32 4.5-6.0 100 2400Uno-k-10 r-Uno-n-10 10 36 5.0-8.0 100 1200
Product codemm mm pcs. pcs.
P-Uno-06k 6 3.535 200 2400
Product codemm mm pcs. pcs.
P-Uno-06S 6 3.535 200 2400
Product codePolyprolylen
Product codenylon (grey) mm mm mm pcs. outer
Uno-yel-96-C r-Uno-yel-96n 5 24 3.0-4.5 96 10Uno-reD-48-C r-Uno-reD-48n 6 28 3.5-5.0 48 5Uno-reD-96-C r-Uno-reD-96n 6 28 3.5-5.0 96 10Uno-brn-48-C - 7 30 4.0-6.0 48 5Uno-blU-40-C r-Uno-blU-40n 8 32 4.5-6.0 40 5Uno-blU-80-C r-Uno-blU-80n 8 32 4.5-6.0 80 10Uno-gry-40-C r-Uno-gry-40n 10 36 5.0-8.0 40 5Uno-gry-80-C r-Uno-gry-80n 10 36 5.0-8.0 80 10
5Yellow
6Red
7Brown
8Blue
10Grey
UNIVERSAL PLUG UNOwith AnglE hOOk
UNIVERSAL PLUG UNOwith rOUnd hOOk
UNIVERSAL PLUG UNOwith COUntErSUnk hEAd SCrEw
UNO
All SUBStrAtES
ApprOvAlS
ApprOvAlSApprOvAlS
ApprOvAlS
-
16www.koelner.plwww.koelner.pl
Size 5 6 7 8 10Plug diameter d [mm] 5 6 7 8 10Hole diameter in substrate d0 [mm] 5 6 7 8 10Hole diameter in fixture dfix [mm] 6 7 8 9 11Minimum hole depth h0 [mm] 34 38 40 42 46Installation depth hnom [mm] 20 24 26 28 32Minimum substrate thickness hmin [mm] 50 55 60 65 70
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN] PERfORMANCE dATA IN [Kg]
Size 5 6 7 8 10Installation depth hnom [mm] 20 24 26 28 32ConCrete C20/25Characteristic resistance nrk [kn] 1.39 1.48 0.89 1.25 3.59Design resistance nrd [kn] 0.77 0.82 0.49 0.69 1.99recommended loads nrec [kn] 0.55 0.59 0.35 0.49 1.42SolID brICk 7.5 MPaCharacteristic resistance nrk [kn] 0.47 0.85 0.32 0.68 0.69Design resistance nrd [kn] 0.19 0.34 0.13 0.38 0.38recommended loads nrec [kn] 0.14 0.24 0.09 0.27 0.27aerateD ConCrete 600Characteristic resistance nrk [kn] 0.27 0.63 0.51 0.48 0.42Design resistance nrd [kn] 0.13 0.31 0.25 0.24 0.21recommended loads nrec [kn] 0.09 0.22 0.18 0.17 0.15CavIty brICk 15 MPaCharacteristic resistance nrk [kn] 0.72 0.51 0.71 0.95 1.18Design resistance nrd [kn] 0.29 0.20 0.28 0.38 0.47recommended loads nrec [kn] 0.21 0.14 0.20 0.27 0.34Hollow brICk 15MPaCharacteristic resistance nrk [kn] 0.39 0.51 0.60 0.81 0.92Design resistance nrd [kn] 0.15 0.20 0.24 0.32 0.37recommended loads nrec [kn] 0.11 0.14 0.17 0.23 0.26PlaSterboarD MIn. 12.5 MMCharacteristic resistance nrk [kn] 0.17 0.21 0.25 0.26 0.34Design resistance nrd [kn] 0.07 0.08 0.10 0.10 0.13recommended loads nrec [kn] 0.05 0.06 0.07 0.07 0.09
Size 5 6 7 8 10Installation depth hnom [mm] 20 24 26 28 32ConCrete C20/25Characteristic resistance nrk [kg] 139.0 148.0 89.0 125.0 359.0Design resistance nrd [kg] 77.0 82.0 49.0 69.0 199.0recommended loads nrec [kg] 55.0 58.6 35.0 49.3 142.1SolID brICk 7.5 MPaCharacteristic resistance nrk [kg] 47.0 85.0 32.0 68.0 69.0Design resistance nrd [kg] 19.0 34.0 13.0 38.0 38.0recommended loads nrec [kg] 13.6 24.3 9.3 27.1 27.1aerateD ConCrete 600Characteristic resistance nrk [kg] 27.0 63.0 51.0 48.0 42.0Design resistance nrd [kg] 13.0 31.0 25.0 24.0 21.0recommended loads nrec [kg] 9.3 22.1 17.9 17.1 15.0CavIty brICk 15 MPaCharacteristic resistance nrk [kg] 72.0 51.0 71.0 95.0 118.0Design resistance nrd [kg] 29.0 20.0 28.0 38.0 47.0recommended loads nrec [kg] 20.7 14.3 20.0 27.1 33.6Hollow brICk 15MPaCharacteristic resistance nrk [kg] 39.0 51.0 60.0 81.0 92.0Design resistance nrd [kg] 15.0 20.0 24.0 32.0 37.0recommended loads nrec [kg] 10.7 14.3 17.1 22.9 26.4PlaSterboarD MIn. 12.5 MMCharacteristic resistance nrk [kg] 17.0 21.0 25.0 26.0 34.0Design resistance nrd [kg] 7.0 8.0 10.0 10.0 13.2recommended loads nrec [kg] 5.0 5.7 7.1 7.1 9.4
L
d
General FixinGsGeneral FixinGs
INSTALLATION
-
www.koelner.plwww.koelner.pl17
Product codemm mm mm pcs. pcs.
FIX-K-06K 6 30 3.535 200 4800FIX-K-08K 8 40 4.550 100 2400FIX-K-10K 10 50 6.055 100 1200FIX-K-12K 12 60 8.065 50 600
Product codemm mm mm pcs. pcs.
FIX-K-06S 6 30 3.550 200 4800FIX-K-08S 8 40 4.565 100 1200FIX-K-10S 10 50 6.085 50 600
Product codemm mm mm pcs. pcs.
FIX-K-06+ 6 30 3.530 200 4800FIX-K-06+340 6 30 3.540 200 4800FIX-K-06+350 6 30 3.550 200 2400FIX-K-06+435 6 30 4.035 200 4800FIX-K-06+440 6 30 4.040 200 4800FIX-K-06+450 6 30 4.050 200 2400FIX-K-08+ 8 40 5.045 200 2400FIX-K-08+450 8 40 4.550 200 2400FIX-K-08+460 8 40 4.560 100 1200FIX-K-08+550 8 40 5.050 100 1200FIX-K-10+560 10 50 5.060 100 1200FIX-K-10+660 10 50 5.060 100 1200
Product codemm mm mm pcs. pcs.
FIX-K-12H 12 60 8.0130 25 300
Product codeIpolypropylene PP
Product codePolyamide PA 6.0 (nylon) mm mm pcs. pcs.
FIX-KK-06 FIX-NK-06 6 30 250 6000FIX-KK-08 FIX-NK-08 8 40 200 2400FIX-KK-10 FIX-NK-10 10 50 100 1200FIX-KK-12 FIX-NK-12 12 60 50 600FIX-KK-14 FIX-NK-14 14 70 25 600Mega packFIX-KK-06M FIX-NK-06M 6 30 - 35000FIX-KK-08M FIX-NK-08M 8 40 - 15000FIX-KK-10M FIX-NK-10M 10 50 - 8000FIX-KK-12M FIX-NK-12M 12 60 - 4500FIX-KK-14-070M FIX-NK-14-070M 14 70 - 3000
FIX WITH FLANGE
FIX WITH FLANGEwith countersunk head screw
FIX WITH FLANGEwith angle hook
FIX WITH FLANGEwith pig tail hook
FIX WITH FLANGEwith round hook
suBstrate
eXpansion plugs
General FixinGsGeneral FixinGs
Fix expansion pluGs
MATERIAL:Plug sleeve: polyamide PA 6.0 (Nylon) or impact resistant co-polymer of polypropylene PPScrew: zinc electroplated steel ~10 m.
TyPIcAL APPLIcATIoNS:Shelving and cabinetsSuspended ceilingsSwitch boxesTrunking and cable traysBoilersWater heaters & radiators
approvals
approvals
approvals
approvals
approvals
-
18www.koelner.plwww.koelner.pl
nylon on request
FIX WITHOUT FLANGE
FIX WITHOUT FLANGEwith countersunk head screw
FIX WITHOUT FLANGEwith angle hook
FIX WITHOUT FLANGEwith coachscrew
FIX WITHOUT FLANGEwith pig tail hook
FIX WITHOUT FLANGEwith round hook
Product codemm mm mm pcs. pcs.
FIX-05+* 5 25 3.530 200 4800FIX-06+ 6 30 3.530 200 4800FIX-06+340 6 30 3.540 200 4800FIX-06+350 6 30 3.550 200 4800FIX-06+435* 6 30 4.035 200 4800FIX-06+440 6 30 4.040 200 4800FIX-06+450 6 30 4.050 200 4800FIX-08+ 8 40 5.045 200 2400FIX-08+450* 8 40 4.550 200 2400FIX-08+460 8 40 4.560 200 2400FIX-08+550 8 40 5.050 200 2400FIX-08+560 8 40 5.060 100 1200FIX-08+580 8 40 5.080 100 1200FIX-08+100 8 40 5.0100 100 1200FIX-10+550 10 50 5.050 100 1200FIX-10+560 10 50 5.060 100 1200FIX-10+660 10 50 6.060 100 1200FIX-10+680 10 50 6.080 50 600FIX-10+100 10 50 6.0100 50 600FIX-10+120 10 50 6.0120 50 600FIX-10+160 10 50 6.0160 25 300FIX-12+680 12 60 6.080 50 1200FIX-12+100 12 60 6.0100 50 600FIX-12+120 12 60 6.0120 50 600
Product codepolypropylene PP
Product codePolyamide PA 6.0 (nylon) mm mm pcs. pcs.
FIX-K-05 FIX-N-05 5 25 400 9600FIX-K-06 FIX-N-06 6 30 250 6000FIX-K-08 FIX-N-08 8 40 200 2400FIX-K-10 FIX-N-10 10 50 100 1200FIX-K-12 FIX-N-12 12 60 50 1200FIX-K-14 FIX-N-14 14 70 25 600Mega packFIX-K-05M FIX-N-05M 5 25 - 50000FIX-K-06M FIX-N-06M 6 30 - 35000FIX-K-08M FIX-N-08M 8 40 - 15000FIX-K-10M FIX-N-10M 10 50 - 8000FIX-K-12M FIX-N-12M 12 60 - 4500FIX-K-14-070M FIX-N-14-070M 14 70 - 3000FIX-K-14-100M FIX-N-14-100M 14 70 - 3000
Product codemm mm mm pcs. pcs.
FIX-06K 6 30 3.535 200 4800FIX-08K 8 40 4.550 100 2400FIX-10K 10 50 6.055 100 1200FIX-12K 12 60 8.065 50 600
Product codepolypropylene PP
Product codePolyamid PA 6.0Nylon mm mm mm pcs. pcs.
FIX-06S - 6 30 3.550 200 4800FIX-08S FIX-N-08S 8 40 4.565 100 1200FIX-10S FIX-N-10S 10 50 6.085 50 600
Product codemm mm mm pcs. pcs.
FIX-10/660 10 50 6.060 100 1200FIX-10/680 10 50 6.080 50 600FIX-10/100 10 50 6.0100 50 600FIX-10/120 10 50 6.0120 50 600FIX-12/60 12 60 8.060 50 600FIX-12/70 12 60 8.070 50 600FIX-12/80 12 60 8.080 50 600FIX-12/100 12 60 8.0100 50 600FIX-12/120 12 60 8.0120 50 600FIX-12/140 12 60 8.0140 25 300FIX-12/160 12 60 8.0160 25 300FIX-12/180 12 60 8.0180 25 300FIX-12/200 12 60 8.0200 25 300FIX-14/80 14 70 1080 25 300FIX-14/100 14 70 10100 25 300FIX-14/120 14 70 10120 25 300FIX-14/160 14 70 10160 25 300FIX-14/180 14 70 10180 25 300FIX-14/200 14 70 10200 25 300FIX-14/220 14 70 10220 25 125FIX-14/260 14 70 10260 25 125
Product codemm mm mm pcs. pcs.
FIX-12H 12 60 8.0130 25 300
suBstrate
eXpansion plugs
General FixinGs
approvals
approvals
approvals
approvals
approvals
-
www.koelner.plwww.koelner.pl19
Size 5 6 8 10 12 14Plug diameter d [mm] 5 6 8 10 12 14Hole diameter in substrate d0 [mm] 5 6 8 10 12 14Hole diameter in fixture dfix [mm] 6 7 9 11 13 15Minimum hole depth h0 [mm] 35 40 50 60 70 80Installation depth hnom [mm] 25 30 40 50 60 70Minimum substrate thickness hmin [mm] 55 60 70 80 90 100
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN]
PERfORMANCE dATA IN [Kg]
INSTALLATION
Size 5 6 8 10 12 14Installation depth hnom [mm] 25 30 40 50 60 70ConCrete C20/25Characteristic resistance nrk [kn] 0.38 0.22 0.64 0.85 2.64 2.99Design resistance nrd [kn] 0.20 0.10 0.30 0.40 1.30 1.50recommended loads nrec [kn] 0.14 0.07 0.21 0.29 0.93 1.07SolID brICk 7.5 MPaCharacteristic resistance nrk [kn] - - 0.93 0.92 2.42 1.49Design resistance nrd [kn] - - 0.45 0.45 1.20 0.75recommended loads nrec [kn] 0.32 0.32 0.86 0.54aerateD ConCrete 600Characteristic resistance nrk [kn] - - 1.13 0.73 1.47 1.33Design resistance nrd [kn] - - 0.55 0.35 0.75 0.65recommended loads nrec [kn] 0.39 0.25 0.54 0.46
Size 5 6 8 10 12 14Installation depth hnom [mm] 25 30 40 50 60 70ConCrete C20/25Characteristic resistance nrk [kg] 38.0 22.0 64.0 85.0 264.0 299.0Design resistance nrd [kg] 20.0 10.0 30.0 40.0 130.0 150.0recommended loads nrec [kg] 14.3 7.1 21.4 28.6 92.9 107.1SolID brICk 7.5 MPaCharacteristic resistance nrk [kg] - - 93.0 92.0 242.0 149.0Design resistance nrd [kg] - - 45.0 45.0 120.0 75.2recommended loads nrec [kg] 32.1 32.1 85.7 53.7aerateD ConCrete 600Characteristic resistance nrk [kg] - - 113.0 73.0 147.0 133.0Design resistance nrd [kg] - - 55.0 35.0 75.0 65.0recommended loads nrec [kg] 39.3 25.0 53.6 46.4
General FixinGs
-
20www.koelner.plwww.koelner.pl
UNIVERSAL EXPANSION PLUGS
UNIVERSAL EXPANSION PLUGSUNIVERSAL EXPANSION PLUGS
UNIVERSAL EXPANSION PLUGS
with COUntErSUnk hEAd SCrEw with pz rECESS with AnglE hOOk
with rOUnd hOOk
Product codemm mm mm pcs. pcs.
kS-06040 6 40 4,040 200 2400kS-06050 6 40 4,050 200 2400kS-06060 6 40 4,060 200 2400kS-08050 8 50 4,550 100 1200kS-08060 8 50 4,560 100 1200kS-08070 8 50 4,570 100 1200kS-10060 10 60 5,060 50 600kS-10070 10 60 5,070 50 600kS-10080 10 60 5,080 50 600kS-10100 10 60 5,0100 25 300
Product codemm mm mm pcs. pcs.
kS-06k 6 40 3,550 200 2400kS-08k 8 50 4,565 100 1200
Product codemm mm mm pcs. pcs.
kS-06S 6 40 3,565 200 2400kS-08S 8 50 4,585 100 1200
Product codemm mm pcs. pcs.
kS-06 6 40 200 3600kS-08 8 50 200 2400kS-10 10 60 100 1200MasterkS-06M 6 40 200 3600kS-08M 8 50 200 2400kS-10M 10 60 100 1200
SUBStrAtE
General FixinGs
uniVersal expansion pluGs
MaterIal:Plug sleeve:polyamide Pa 6.0 (nylon) or impact resistant co-polymer of polypropylene PPScrew:electro-zinc coated steel ~10 m.
tyPICal aPPlICatIonS:Shelving and cabinets Suspended ceilings Switch boxes trunking and cable trays boilers water heaters & radiators
INSTALLATION
-
www.koelner.plwww.koelner.pl21
SEt COntEntS:
expansion plug, countersunk head screw, 4 levelling washers.
SEt COntEntS:
2 expansion plugs, 2 stud screws, 2 nuts, 2 off-centre washers, 2 masking caps.
FOr inStAllAtiOn On StEEl StAirCASE StringErS
FOr inStAllAtiOn On COnCrEtE StAirCASE StringErS
CENTRE PUNCHESFOr StAir trEAdS
STAIR-TREAD FIXINGS
STAIR-TREAD FIXINGS
Product codeS1 l1 S2 l2
mm mm mm mm pcs. pcs.lSM 14 20 9 10 25 600
Product codeS2
mm pcs.lSb-P 8 2
Product codeS1 l1 S2 l2
mm mm mm mm pcs. pcs.lSb 14 22 8 40 25 600
SUBStrAtE
SUBStrAtE
General FixinGs
INSTALLATION
INSTALLATION
-
22www.koelner.plwww.koelner.pl
SEt COntEntS:
2 masking caps 2 expansion plugs
2 countersunk head screws 2 nuts
SEt COntEntS:
2 expansion plugs, 2 snap-fit sleeves,
2 hexagonal head screws, 2 masking caps.
WASHBASIN FIXINGS
WC-FIXINGS
Product codemm mm mm pcs. pcs.
kPU100 10 50 M880 1 125kPU120 12 60 M8100 1 100kPU140 12 60 M8120 1 75kPU141 14 70 M10140 1 65
Product codemm mm mm pcs. pcs.
kPM100 10 50 6.080 1 500
SUBStrAtE
SUBStrAtE
General FixinGs
INSTALLATION
INSTALLATION
-
www.koelner.plwww.koelner.pl23
SET CONTENTS:
expansion plug, countersunk head screw,
ball-shaped door stop.
DOOR STOPSBALL SHAPED
Product codeS2 L2
mm mm pcs. pcs.FIX-ODBK-01 8 40 white 15 180FIX-ODBK-02 8 40 beige 15 180FIX-ODBK-03 8 40 brown 15 180FIX-ODBK-04 8 40 black 15 180FIX-ODBK-05 8 40 gray 15 180
SUBSTRATE
STEEL PLUGS FOR AERATED CONCRETE
Product codemm mm mm mm pcs. pcs.
KGS-0530 5.0 30 4.5 min. 30 200 2400KGS-0632 6.0 32 4.5-5.0 min. 32 200 2400KGS-0838 8.0 38 5.0-6.0 min. 38 200 1200KGS-0860 8.0 60 5.0-6.0 min. 60 200 1200KGS-1060 10.0 60 6.0-8.0 min. 60 100 1200
SUBSTRATE
INSTALLATION
INSTALLATION
-
24www.koelner.plwww.koelner.pl
FrAME FiXing
FF1
longitudinal ribs facilitate easy insertion into hole and prevent rotation
2
2 long wings to stabilise plug while inserting screw, especially in hollow material
3
2 rows of spring wings expand to keep plug in required position
axially located expansion slots in mid length of plug to allow an even distribution of forces and to increase load carrying capacity
4
easy opening of fi nal expansion zone is achieved by the undercut and curved expansion slots reducing the required torque
expansion in 4 directions in 4 base materials according to EtAg (A, B, C, d).
5
6
two zones of threadhigher thread and lesser core diameter in fi rst zone to facilitate initial installation
bigger diameter of core in second zone, boosts expan-sion in centre zone of plug
1
screW Features:carbon steel, hardened, zinc electroplated, Cr 3+
two types of screw head countersunk, tOrX 40, provides ush fi nish in fi xture hex ange head, tOrX 40, install using hex socket or tOrX drive
pluG Features:two types: countersunk for ush fi xing of soft material like wood & wide ange for solid fi xing of hard material like steel
profi led internal geometry, designed to fi t both types of screw heads
for 4 base material types according to EtAg 020 specially formulated Ultramid
equal embedment depth for all base materials, 70 mm
embedment depth mark
multi axis expansion
FraMe FixinGs
-
www.koelner.plwww.koelner.pl25
FraMe FixinGs
FF1 FRAME FIXING
FF1 FRAME FIXING
with COAChSCrEw
with COUntErSUnk hEAd SCrEw
Product codePolypropylen
Product codenylon grey
Product codenylon blue mm mm pcs.
r-FF1-10k080 r-FF1-n-10k080/g r-FF1-n-10k080 1080 789 torX40/M13 50r-FF1-10k100 r-FF1-n-10k100/g r-FF1-n-10k100 10100 7109 torX40/M13 25r-FF1-10k120 r-FF1-n-10k120/g r-FF1-n-10k120 10120 7129 torX40/M13 25r-FF1-10k140 r-FF1-n-10k140/g r-FF1-n-10k140 10140 7149 torX40/M13 25r-FF1-10k160 r-FF1-n-10k160/g r-FF1-n-10k160 10160 7169 torX40/M13 25r-FF1-10k200* r-FF1-n-10k200/g* r-FF1-n-10k200* 10200 7209 torX40/M13 25r-FF1-10k240* r-FF1-n-10k240/g* r-FF1-n-10k240* 10240 7249 torX40/M13 25r-FF1-10k300* r-FF1-n-10k300/g* r-FF1-n-10k300* 10300 7309 torX40/M13 25
Product codePolypropylen
Product codenylon grey
Product codenylon blue mm mm pcs.
r-FF1-10l080 r-FF1-n-10l080/g r-FF1-n-10l080 1080 789 torX40 50r-FF1-10l100 r-FF1-n-10l100/g r-FF1-n-10l100 10100 7109 torX40 25r-FF1-10l120 r-FF1-n-10l120/g r-FF1-n-10l120 10120 7129 torX40 25r-FF1-10l140 r-FF1-n-10l140/g r-FF1-n-10l140 10140 7149 torX40 25r-FF1-10l160 r-FF1-n-10l160/g r-FF1-n-10l160 10160 7169 torX40 25r-FF1-10l200* r-FF1-n-10l200/g* r-FF1-n-10l200* 10200 7209 torX40 25r-FF1-10l240* r-FF1-n-10l240/g* r-FF1-n-10l240* 10240 7249 torX40 25r-FF1-10l300* r-FF1-n-10l300/g* r-FF1-n-10l300* 10300 7309 torX40 25
SUBStrAtE
SUBStrAtE
FraMe FixinGsApprOvAlS
pEnding
* made to order
* made to order
-
26www.koelner.plwww.koelner.pl
FraMe FixinGs
Size Concrete C12/15 Concrete C20/25 Structural clay tile lightweight concrete hollow brickaerated concrete
Plug diameter d [mm] 10 10 10 10 10Hole diameter in substrate d0 [mm] 10 10 10 10 10Hole diameter in fixture dfix [mm] 11 11 11 11 11Minimum hole depth h0 [mm] 60 60 80 80 80Installation depth hnom [mm] 50 50 70 70 70Minimum substrate thickness hmin [mm] 100 100 100 100 100
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN]
PERfORMANCE dATA IN [Kg]
Size Concrete C12/15 Concrete C20/25 Structural clay tile lightweight concrete hollow brickaerated concrete
Installation depth hnom [mm] 50 50 70 70 70Characteristic resistance nrk [kn] 10.00 11.00 1.20 0.60 1.50Design resistance nrd [kn] 5.00 5.50 0.60 0.30 0.75recommended loads nrec [kn] 3.57 3.93 0.43 0.21 0.54
forcmin [mm] 50 50 50 50 50smin [mm] 100 100 100 100 100
Size Concrete C12/15 Concrete C20/25 Structural clay tile lightweight concrete hollow brickaerated concrete
Installation depth hnom [mm] 50 50 70 70 70Characteristic resistance nrk [kg] 1000.0 1100.0 120.0 60.0 150.0Design resistance nrd [kg] 500.0 550.0 60.0 30.0 75.0recommended loads nrec [kg] 357.1 392.9 42.9 21.4 53.6
forcmin [mm] 50 50 50 50 50smin [mm] 100 100 100 100 100
INSTALLATION
-
www.koelner.plwww.koelner.pl27
TORX 40
PZ3/PZ4
KDS, KD, KDT FRAME FIXINGS
Product codemm mm pcs. pcs.
kDt-10080 1080 6.885 50 600kDt-10100 10100 6.8105 25 450kDt-10120 10120 6.8125 25 300kDt-10140 10140 6.8145 25 300kDt-10160 10160 6.8165 25 300kDt-10200 10200 6.8205 25 300
Product codemm mm pcs. pcs.
kDS-08100 8100 4.8105 50 600kDS-08120 8120 4.8125 50 600kDS-08140 8140 4.8145 50 600kDS-10080 1080 6.885 50 600kDS-10100 10100 6.8105 25 450kDS-10120 10120 6.8125 25 300kDS-10140 10140 6.8145 25 300kDS-10160 10160 6.8165 25 300kDS-10200 10200 6.8205 25 300kDS-10240 10240 6.8245 25 300
Product codemm mm pcs. pcs.
kD-10080 1080 6.885 50 600kD-10100 10100 6.8105 25 450kD-10120 10120 6.8125 25 300kD-10140 10140 6.8145 25 300kD-10160 10160 6.8165 25 300kD-10200 10200 6.8205 25 300kD-10240 10240 6.8245 25 300kD-16140 16140 12150 20 200kD-16160 16160 12170 20 200kD-16200 16200 12210 20 200kD-16240 16240 12250 20 200
Product codemm mm
kmm pcs. pcs.
kD-08100k 8100 5.0120 60* 50 600kD-08120k 8120 5.0140 60* 50 600kD-08140k 8140 5.0160 60* 50 600kD-10080k 1080 7.0100 60* 50 600kD-10100k 10100 7.0120 60* 25 300kD-10120k 10120 7.0140 60* 25 300kD-10140k 10140 7.0160 60* 25 300kD-10160k 10160 7.0180 60* 25 300kD-10200k 10200 7.0200 60* 25 300
SUBStrAtE
with lOng EXpAnSiOn zOnE
ApprOvAlS
FraMe FixinGs
DeSCrIPtIon:Fixing timber or metal window and door frames.
FeatUreS:Countersunk Pozi-head screw provided, suitable for use with screw caps.Durable PA6 grade nylon for extended fi xing life. tough nylon sleeve prevents frame distortion during tightening.anti-rotation lugs. Extended zig-zag design for enhanced expansion.
SUItable For USe In:Concrete,Stonebrickwork & blockwork
tyPICal aPPlICatIon: Quick, easy fixing of timber or metal
door and window frames. No marking out drill straight through
frame.
13/19
* made to order (no approval)
* made to order (no approval)
-
28www.koelner.plwww.koelner.pl
KDS KD, KDT
k min. embedment depthd plug diameterl plug lengthU max. fixture thickness
KD-...K
Size 8 10 16Plug diameter d [mm] 8 10 16Hole diameter in substrate d0 [mm] 8 10 16Hole diameter in fixture dfix [mm] 9 11 17Minimum hole depth h0 [mm] 70 70 100Installation depth hnom [mm] 60 60 90Minimum substrate thickness hmin [mm] 80 80 120
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN]
PERfORMANCE dATA IN [Kg]
Size 8 10 16Installation depth hnom [mm] 60 60 90Hollow brICk 3.5 MPaCharacteristic resistance nrk [kn] 0.60 1.40 2.10Design resistance nrd [kn] 0.30 0.70 1.10recommended loads nrec [kn] 0.21 0.50 0.79PorotHerM 400Characteristic resistance nrk [kn] - 0.80 1.30Design resistance nrd [kn] - 0.40 0.70recommended loads nrec [kn] - 0.29 0.50aerateD ConCrete 500Characteristic resistance nrk [kn] 0.90 1.20 2.70Design resistance nrd [kn] 0.50 0.60 1.40recommended loads nrec [kn] 0.36 0.43 1.00
Size 8 10 16Installation depth hnom [mm] 60 60 90Hollow brICk 3.5 MPaCharacteristic resistance nrk [kg] 60.0 140.0 210.0Design resistance nrd [kg] 30.0 70.0 110.0recommended loads nrec [kg] 21.4 50.0 78.6PorotHerM 400Characteristic resistance nrk [kg] - 80.0 130.0Design resistance nrd [kg] - 40.0 70.0recommended loads nrec [kg] - 28.6 50.0aerateD ConCrete 600Characteristic resistance nrk [kg] 90.0 120.0 270.0Design resistance nrd [kg] 50.0 60.0 140.0recommended loads nrec [kg] 35.7 42.9 100.0
FraMe FixinGs
INSTALLATION
-
www.koelner.plwww.koelner.pl29
KKS-R, KKD, KKT FRAME FIXINGS
Product code mm
mm pcs. pcs.
kkD-10100 10100 6.8105 25 450kkD-10120 10120 6.8125 25 300kkD-10140 10140 6.8145 25 300kkD-10160 10160 6.8165 25 300
Product code mm
mm pcs. pcs.
kkt-10100 10100 6.8105 25 300kkt-10120 10120 6.8125 25 300kkt-10140 10140 6.8145 25 300kkt-10160 10160 6.8165 25 300
Product code mm
mm pcs. pcs.
kkS-08100 kkS-08100-r 8100 5.5105 PZ2 50 600kkS-08120 kkS-08120-r 8120 5.5125 PZ2 50 600kkS-10080 kkS-10080-r 1080 7.085 PZ4 50 600kkS-10100 kkS-10100-r 10100 7.0105 PZ4 25 450kkS-10120 kkS-10120-r 10120 7.0125 PZ4 25 300kkS-10140 kkS-10140-r 10140 7.0140 PZ4 25 300kkS-10160 kkS-10160-r 10160 7.0165 PZ4 25 300
KKS--R
KKS
with ShOrt EXpAnSiOn zOnE
ApprOvAlS
FraMe FixinGs
DeSCrIPtIon:Fixing timber or metal window and door frames.
FeatUreS:Countersunk Pozi-head screw provided, suitable for use with screw caps.Durable PA6 grade nylon for extended fixing life. tough nylon sleeve prevents frame distortion dur- ing tightening.anti-rotation lugs. Extended zig-zag design for enhanced expansion.
SUItable For USe In:Concrete, Stonebrickwork & blockwork
tyPICal aPPlICatIon: Quick, easy fixing of timber or metal
door and window frames. No marking out drill straight through
frame.
PZ2/PZ4
13
TORX 40
* made to order
* made to order
SUBStrAtE
-
30www.koelner.plwww.koelner.pl
Concrete Solid brick 7.5 MPa
Size 8 10 8 10Plug diameter d [mm] 8 10 8 10Hole diameter in substrate d0 [mm] 8 10 8 10Hole diameter in fixture dfix [mm] 9 11 9 11Minimum hole depth h0 [mm] 50 50 70 70Installation depth hnom [mm] 40 40 60 60Minimum substrate thickness hmin [mm] 80 80 80 80
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN]
PERfORMANCE dATA IN [Kg]
Concrete Solid brick 7.5 MPa
Size 8 10 8 10Installation depth hnom [mm] 40 40 60 60Characteristic resistance nrk [kn] 1.20 2.00 0.80 1.70Design resistance nrd [kn] 0.60 1.00 0.40 0.90recommended loads nrec [kn] 0.43 0.71 0.29 0.64
forcmin [mm] 50 50 50 50smin [mm] 100 100 100 100
Concrete Solid brick 7.5 MPa
Size 8 10 8 10Installation depth hnom [mm] 40 40 60 60Characteristic resistance nrk [kg] 120.0 200.0 80.0 170.0Design resistance nrd [kg] 60.0 100.0 40.0 90.0recommended loads nrec [kg] 42.9 71.4 28.6 64.3
forcmin [mm] 50 50 50 50smin [mm] 100 100 100 100
k min. embedment depthd plug diameterl plug lengthU max. fixture thickness
KKS KKDKKT
FraMe FixinGs
INSTALLATION
-
www.koelner.plwww.koelner.pl31
WHS
WHO
TORX 30
* no approval
* no approval
CONCRETE FRAME SCREWS
CONCRETE FRAME SCREWS
with CYlindEr hEAd, hArdEnEd, FOr wOOd
with COUntErSUnk hEAd, hArdEnEd, FOr pvC
TORX 30
HARDENED SCREWS
Product codemm pcs.
wHS-75052 7.552 100wHS-75072 7.572 100wHS-75092 7.592 100wHS-75112 7.5112 100wHS-75132 7.5132 100wHS-75152 7.5152 100wHS-75182 7.5182 100wHS-75202 7.5202 100wHS-75212 7.5212* 100
Product codemm pcs.
wHo-75052 7.552 100wHo-75072 7.572 100wHo-75092 7.592 100wHo-75112 7.5112 100wHo-75132 7.5132 100wHo-75152 7.5152 100wHo-75182 7.5182 100wHo-75202 7.5202 100wHo-75212 7.5212* 100
SUBStrAtEpredrilled 6: no predrilling required:
ApprOvAlS
Size Concrete C20/25
Solid brick 7.5
MPa
Honeycomb clay brick
k3
aerated concrete
400Plug diameter d [mm] 7.5 7.5 7.5 7.5Hole diameter in substrate d0 [mm] 6 6 6 -Hole diameter in fi xture dfi x [mm] 8 8 8 8Minimum hole depth h0 [mm] 40 70 70 -Installation depth hnom [mm] 30 60 60 60Minimum substrate thickness hmin [mm] 60 90 90 90
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN]
PERfORMANCE dATA IN [Kg]
Size Concrete C20/25
Solid brick 7.5
MPa
Honeycomb clay brick
k3
aerated concrete
400Installation depth hnom [mm] 30 60 60 60tenSIon loaDSCharacteristic resistance nrk [kn] 5.10 2.10 0.90 1.10Design resistance nrd [kn] 1.70 0.70 0.30 0.40recommended loads nrec [kn] 1.21 0.50 0.21 0.29
forcmin [mm] 50 50 50 50smin [mm] 100 100 100 100
SHear loaDSCharacteristic resistance vrk [kn] 5.10 2.10 0.90 1.10Design resistance vrd [kn] 1.70 0.70 0.30 0.40recommended loads vrec [kn] 1.21 0.50 0.21 0.29
Size Concrete C20/25
Solid brick 7.5
MPa
Honeycomb clay brick
k3
aerated concrete
400Installation depth hnom [mm] 30 60 60 60tenSIon loaDSCharacteristic resistance nrk [kg] 510.0 210.0 90.0 110.0Design resistance nrd [kg] 170.0 70.0 30.0 40.0recommended loads nrec [kg] 121.4 50.0 21.4 28.6
forcmin [mm] 50 50 50 50smin [mm] 100 100 100 100
SHear loaDSCharacteristic resistance vrk [kg] 510.0 210.0 90.0 110.0Design resistance vrd [kg] 170.0 70.0 30.0 40.0recommended loads vrec [kg] 121.4 50.0 21.4 28.6
FraMe FixinGs
INSTALLATION
-
32www.koelner.plwww.koelner.pl
PU ADHESIVE FOR FOAMED POLYSTYRENE
WIPES
PU FOAM CLEANER
PU FOAM GUN
PRIMERS
PU FOAM GUN
Product code Description
Sizel pcs.
rgU-01 Primer emulsion 1 480
rgU-05 Primer emulsion 5 123
rgU-05-g Deep penetrating primer emulsion 5 123
rgU-05-k Primer emulsion concentrate 5 123
Product codeCan size Content Effi ciency
DIn 4102ml ml m2 pcs. pcs.
rPP-FIX 1000 750 up to 8 b3 12 768
Product code DescriptionCan size Content
ml ml pcs. pcs.
rPC-0500 Cleaner for uncured PU foam 650 500 12 768
Product codepcs. pcs.
rPC-wIPeS 60 8
Product codepcs.
rPP-gUn 1
A* concrete;
B* solid brick.
k min. embedment depthd plug diameterl plug lengthU max. fi xture thickness
METAL FRAME ANCHORS
METAL FRAME ANCHORS MASKING CAP
Product codemm
Predrilled holemm
kmm
Umm
a* b* a* b* pcs.o-10072 1072 10 30 60 40 10 100o-10092 1092 10 30 60 60 30 100o-10112 10112 10 30 60 80 50 100o-10132 10132 10 30 60 100 70 100o-10152 10152 10 30 60 120 90 100o-10182 10182 10 30 60 150 120 100o-10202 10202 10 30 60 170 140 500
Product code Cap colourmm pcs. pcs.
ko-braZ brown 15 100 1000ko-bIaly white 15 100 1000
SUBStrAtE
ApprOvAlS
FraMe FixinGs
-
www.koelner.plwww.koelner.pl33
APPROVAL
PU GUN FOAMS
HANDHELD PU FOAMS
RPS-EKOMAXRPS-EKOMAX-W
RPP-EKOMAXRPP-EKOMAX-W
RPS-500RPS-500-W
RPPRPP-W
RPSRPS-W
RPP-65RPP-65-W
RPP-45RPP-45-W
RPS-PVC
RPS-PVC
APPROVAL
Product code Description Can sizemlContent
mlEffi ciency
lDIn 4102 pcs. pcs.
rPS-ekoMaX ekoMaX handheld PU Foam 1000 650 up to 40 b3 12 768rPS-ekoMaX-w ekoMaX handheld PU Foam winter 1000 650 up to 40 b3 12 768rPS-500 Handheld PU Foam 650 500 up to 30 b3 12 1152rPS-500-w Handheld PU Foam 650 500 up to 30 b3 12 1152rPS Handheld PU Foam winter 1000 750 up to 45 b3 12 768rPS-w Handheld PU Foam winter 1000 750 up to 45 b3 12 768rPS-PCv Handhels PU Foam for PvC 1000 750 up to 45 b3 12 768rPS-PCv-w Handhels PU Foam for PvC winter 1000 750 up to 45 b3 12 768
Product code Description Can sizemlContent
mlEffi ciency
lDIn 4102 pcs. pcs.
rPP-ekoMaX ekoMaX PU gun Foam 1000 720 up to 40 b3 12 768rPP-ekoMaX-w ekoMaX PU gun Foam winter 1000 720 up to 40 b3 12 768rPP PU gun Foam 1000 750 up to 42 b3 12 768rPP-w PU gun Foam winter 1000 750 up to 42 b3 12 768rPP-45 PU gun Foam 45l 1000 750 up to 45 b3 12 768rPP-45-w PU gun Foam 45l winter 1000 750 up to 45 b3 12 768rPP-65 PU gun Foam 65l 1000 840 up to 65 b3 12 768rPP-65-w PU gun Foam 65l winter 1000 840 up to 65 b3 12 768rPP-PCv PU gun Foam for PvC 1000 750 up to 45 b3 12 768rPP-PCv-w PU gun Foam for PvC winter 1000 750 up to 45 b3 12 768
RPP-45 RPP-65RPP
RPS-500 RPS
pu FoaMs
RPP-EKOMAX
RPS-EKOMAX
-
34
UNIVERSAL SILICONE
DISPENSERS
SANITARY SILICONE
CONSTRUCTION SILICONE
NEUTRAL SILICONE NO 11
ACRYL
GLASS WORK SILICONE
ROOF SEALANT
SILICONEhigh tEMpErAtUrE
SILICONE GLUEFOr MirrOrS
MN-79-011MN-79-012MN-79-012
Product codemm pcs. pcs.
Mn-79-011 9/23 12 24Mn-79-012 9/23 6 24
Product code Cap colourCan size
ml pcs. pcs.r-Sl-UnI-01 Clear 300 15 1260r-Sl-UnI-02 white 300 15 1260r-Sl-UnI-03 grey 300 15 1260r-Sl-UnI-04 brown 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-San-01 Clear 300 15 1260r-Sl-San-02 white 300 15 1260r-Sl-San-03 grey 300 15 1260r-Sl-San-04 brown 300 15 1260r-Sl-San-07 black 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-bUD-01 Clear 300 15 1260r-Sl-bUD-02 white 300 15 1260r-Sl-bUD-03 grey 300 15 1260r-Sl-bUD-04 brown 300 15 1260r-Sl-bUD-07 black 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-neU-01 Clear 300 15 1260r-Sl-neU-02 white 300 15 1260r-Sl-neU-03 grey 300 15 1260r-Sl-neU-04 brown 300 15 1260r-Sl-neU-07 black 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-Dek-01 Clear 300 15 1260r-Sl-Dek-02 white 300 15 1260r-Sl-Dek-04 brown 300 15 1260r-Sl-Dek-06 brick-red 300 15 1260r-Sl-Dek-08 graphite 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-Skl-01 Clear 300 15 1260r-Sl-Skl-02 white 300 15 1260r-Sl-Skl-03 grey 300 15 1260r-Sl-Skl-04 brown 300 15 1260r-Sl-Skl-07 black 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-tk-05 red 300 15 1260r-Sl-tk-07 black 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-lUS-01 Clear 300 15 1260
Product code Cap colourCan size
ml pcs. pcs.r-Sl-Ma-02 white 310 15 1260
silicones
-
DRYWALL SCREWS, SCREWDRIVERS, COLLATED DRYWALL SCREWSDRYWALL SCREWS, SCREWDRIVERS, COLLATED DRYWALL SCREWS
Drywa
ll syst
ems fi
xings
Drywa
ll syst
ems fi
xings
Dr
yw
al
l
sy
st
em
s
fi
xi
ng
s
Dr
yw
al
l
sy
st
em
s
fi
xi
ng
s
D
r
y
w
a
l
l
s
y
s
t
e
m
s
f
i
x
i
n
g
s
-
36www.koelner.plwww.koelner.pl
FS and FT
FS
FT
drYWALL SCrEWS
DRYWALL SCREWS, COLLATED DRYWALL SCREWS DRYWALL SCREWS, COLLATED DRYWALL SCREWS
DESCRIPTION xing of plasterboard to supporting structures, steel pro les (FS type), timber laths (FT type)
MATERIALblack phosphate low carbon steel.
PROPERTIEScross-head pH2
MINMM
CM
MINMM
CM
MINMM
CM
S
MM
MMS
MM
MM
S
MM
MM
-
www.koelner.pl37
www.koelner.pl
Product codemm pcs. pcs.
FS-3525 3,525 1000 24000FS-3535 3,535 1000 12000FS-3545 3,545 500 6000FS-3555 3,555 500 6000FS-4270 4,270 250 3000FS-4890 4,890 250 3000FS-48100 4,8100 200 2400FS-48110 4,8110 200 2400FS-48120 4,8120 200 2400
FoR MeTAL FoR WooD
Product codemm pcs. pcs.
FT-3525 3,525 1000 24000FT-3535 3,535 1000 12000FT-3545 3,545 500 6000FT-3555 3,555 500 6000FT-4270 4,270 250 3000FT-4890 4,890 250 3000FT-48100 4,8100 200 2400FT-48110 4,8110 200 2400FT-48120 4,8120 200 2400
Product codemm pcs. pcs.
WS-3525 3,525 1000 18000WS-3535 3,535 1000 12000WS-3545 3,545 500 6000
Product codemm pcs. pcs.
WS-3595 3,59,5 1000 24000WS-3595-oC 3,59,5 1000 24000
Product codemm pcs. pcs.
WS-3911 3,911 1000 24000WS-3911-oC 3,911 1000 24000
Product code Pcs./stripmm pcs. pcs.
FSC-3525 3,525 50 1000 10000FSC-3535 3,535 50 1000 10000
Product code Pcs./stripmm pcs. pcs.
FTC-3525 3,525 50 1000 10000FTC-3535 3,535 50 1000 10000FTC-3545 3,545 50 1000 10000FTC-3550 3,550 50 1000 10000FTC-3555 3,555 50 1000 10000
DRYWALL SCREWS, COLLATED DRYWALL SCREWS
Black phosphate low carbon steel
Low-carbon electro zinc plated steel min. 6 m.
BuGLE HEAD DRYWALL SCREWS
COLLATED BuGLE HEAD DRYWALL SCREWS
PAN HEAD SELF DRILLING BuGLE HEAD SELF DRILLINGDRYWALL SCREWSDRYWALL SCREWS
SUBSTrATE
SUBSTrATE
SUBSTrATE SUBSTrATE
SUBSTrATE
SUBSTrATE
FoR MeTAL FoR WooD
-
38www.koelner.plwww.koelner.pl
Steel profile Timber Steel profile
Screw type FS- FT- WS-Screw diameter d [mm] 3.5 4.2 4.8 3.5 4.2 4.8 3.5 3.9Hole diameter in substrate d0 [mm] N/A N/A N/AInstallation depth hnom [mm] N/A 14.0 16.8 19.1 N/AMinimum substrate thickness hmin [mm] 0.5 28.0 34.0 38.0 0.75
MECHANICAL PROPERTIES
PERfORMANCE dATA IN [KN]
FS-
Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kN] 0.70 0.75 0.80design resistance NRd [kN] 0.35 0.40 0.45Recommended loads Nrec [kN] 0.25 0.29 0.32PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kN] 0.57 0.55design resistance NRd [kN] 0.30 0.29Recommended loads Nrec [kN] 0.21 0.21
FT-
Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kN] 1.00 1.40 2.15design resistance NRd [kN] 0.30 0.45 0.52Recommended loads Nrec [kN] 0.21 0.32 0.37PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kN] 0.55 0.59 0.52design resistance NRd [kN] 0.17 0.18 0.16Recommended loads Nrec [kN] 0.12 0.13 0.11
WS-
Size 3.5 3.9PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kN] 1.15 1.15design resistance NRd [kN] 0.60 0.60Recommended loads Nrec [kN] 0.43 0.43SHeARINg beTWeeN TWo STeel SHeeTSCharacteristic resistance NRk [kN] 2.10 1.65design resistance NRd [kN] 1.15 0.90Recommended loads Nrec [kN] 0.82 0.64
FSWS-3911 WS-3595
WS
FT
DRYWALL SCREWS, COLLATED DRYWALL SCREWS DRYWALL SCREWS, COLLATED DRYWALL SCREWS
-
www.koelner.pl39
www.koelner.pl
PERfORMANCE dATA IN [Kg]
FS-
Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kg] 70 75 80design resistance NRd [kg] 35 40 45Recommended loads Nrec [kg] 25 29 32PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kg] 57 55design resistance NRd [kg] 30 29Recommended loads Nrec [kg] 21 21
FT-
Size 3.5 4.2 4.8TeNSIoN loAdCharacteristic resistance NRk [kg] 100 140 215design resistance NRd [kg] 30 45 52Recommended loads Nrec [kg] 21 32 37PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kg] 55 59 52design resistance NRd [kg] 17 18 16Recommended loads Nrec [kg] 12 13 11
WS-
Size 3.5 3.9PullINg ouT SCReW HeAd THRougH PlASTeRboARd 12 MMCharacteristic resistance NRk [kg] 115 115design resistance NRd [kg] 60 60Recommended loads Nrec [kg] 43 43SHeARINg beTWeeN TWo STeel SHeeTSCharacteristic resistance NRk [kg] 210 165design resistance NRd [kg] 115 90Recommended loads Nrec [kg] 82 64
DRYWALL SCREWS, COLLATED DRYWALL SCREWS
-
40www.koelner.plwww.koelner.pl
Expansion zone pro le along with new screw design aids central screw travel.
2
External pro le design opti-mizes grip in base material.
3
Larger ange and screw head diameter increases xture hold.
4
Thread lock design prevents pre-expansion during transit installation.
5
Internal Zig Zag expansion ridges in conjunction with tapered lead in provide maxi-mum expansion.
1
MATERIALPlug: percussion-resistant Copolymer polypropylene pp; high quality polyamide pA 6.0 (nylon).Nail: electro zinc plated steel ~10 m.
FXHAmmEr-IN pLUg
HAMMER-IN FIXINGS
-
www.koelner.pl41
www.koelner.pl
HAMMER-IN FIXINGS
CYLINdrICAL HEAd WITH STEEL NAIL
mUSHrOOm HEAd WITH STEEL NAILWITH mETrIC THrEAd HEAd CONNECTOr SCrEW
COUNTErSUNk HEAd WITH STEEL NAIL
Product code Nylon
Product code Polypropylene mm mm mm pcs. pcs.
FX-N-05C025 FX-05C025 5 25 PZ2 200 3600FX-N-05C030 FX-05C030 5 30 PZ2 200 3600FX-N-05C035 FX-05C035 5 35 PZ2 200 3600FX-N-05C040 FX-05C040 5 40 PZ2 200 3600FX-N-06C035 FX-06C035 6 35 PZ2 100 1800FX-N-06C040 FX-06C040 6 40 PZ2 200 1800FX-N-06C045 FX-06C045 6 45 PZ2 100 1800FX-N-06C060 FX-06C060 6 60 PZ2 100 1800FX-N-06C080 FX-06C080 6 80 PZ2 100 1800FX-N-08C045 FX-08C045 8 45 PZ2 100 1200FX-N-08C060 FX-08C060 8 60 PZ2 100 1200FX-N-08C080 FX-08C080 8 80 PZ2 50 600FX-N-08C100 FX-08C100 8 100 PZ2 50 600FX-N-08C120 FX-08C120 8 120 PZ2 50 600FX-N-08C140 FX-08C140 8 140 PZ2 50 600FX-N-08C160 FX-08C160 8 160 PZ2 50 600
Product code Nylon
Product code Polypropylene mm mm mm pcs. pcs.
FX-N-06k040 FX-06k040 6 40 PZ2 200 2400FX-N-06k045 FX-06k045 6 45 PZ2 100 1800FX-N-06k060 FX-06k060 6 60 PZ2 100 1200FX-N-06k080 FX-06k080 6 80 PZ2 100 1200
Product code Nylon
Product code Polypropylene mm mm mm pcs. pcs.
FX-N-05l025 FX-05l025 5 25 PZ2 200 3600FX-N-05l030 FX-05l030 5 30 PZ2 200 3600FX-N-05l035 FX-05l035 5 35 PZ2 200 3600FX-N-05l040 FX-05l040 5 40 PZ2 200 3600FX-N-05l050 FX-05l050 5 50 PZ2 200 2400FX-N-06l035 FX-06l035 6 35 PZ2 200 2400FX-N-06l040 FX-06l040 6 40 PZ2 200 2400FX-N-06l050 FX-06l050 6 50 PZ2 100 1800FX-N-06l060 FX-06l060 6 60 PZ2 100 1200FX-N-06l080 FX-06l080 6 80 PZ2 100 1200FX-N-08l045 FX-08l045 8 45 PZ2 100 1200FX-N-08l060 FX-08l060 8 60 PZ2 100 1200FX-N-08l080 FX-08l080 8 80 PZ2 50 600FX-N-08l100 FX-08l100 8 100 PZ2 50 600FX-N-08l120 FX-08l120 8 120 PZ2 50 600FX-N-08l140 FX-08l140 8 140 PZ2 50 600FX-N-08l160 FX-08l160 8 160 PZ2 50 600N-10l100 10l100 10 100 PZ3 25 300N-10l120 10l120 10 120 PZ3 25 300N-10l140 10l140 10 140 PZ3 25 300N-10l160 10l160 10 160 PZ3 25 300
Product code Nylon
Product code Polypropylene mm mm pcs. pcs.
FX-N-06l040-M6 FX-06l040-M6 6 40 100 1800
HAMMER-IN FIXINGSHAMMER-IN FIXINGS
HAMMER-IN FIXINGS HAMMER-IN FIXINGS
ApprOvALS
ApprOvALS ApprOvALS
ApprOvALS
Size 5 6 8Plug diameter d [mm] 5 6 8Hole diameter in substrate d0 [mm] 5 6 8Hole diameter in fi xture dfi x [mm] 6 7 9Minimum hole depth h0 [mm] 35 35 45Installation depth hnom [mm] 30 30 40Minimum substrate thickness hmin [mm] 55 55 65
MECHANICAL PROPERTIES
SUBSTrATE
SUBSTrATE
SUBSTrATE
SUBSTrATE
-
42www.koelner.plwww.koelner.pl
PERfORMANCE dATA IN [KN] PERfORMANCE dATA IN [Kg]
Size 5 6 8Installation depth hnom [mm] 35 35 45CoNCReTe C20/25Characteristic resistance NRk [kN] 0.40 0.70 1.00design resistance NRd [kN] 0.20 0.35 0.50Recommended loads Nrec [kN] 0.14 0.25 0.36SolId bRICk 7.5 MPACharacteristic resistance NRk [kN] 0.40 0.60 0.70design resistance NRd [kN] 0.20 0.30 0.35Recommended loads Nrec [kN] 0.14 0.21 0.25AeRATed CoNCReTe 600Characteristic resistance NRk [kN] 0.30 0.45 0.50design resistance NRd [kN] 0.15 0.25 0.25Recommended loads Nrec [kN] 0.11 0.18 0.18
Size 5 6 8Installation depth hnom [mm] 35 35 45CoNCReTe C20/25Characteristic resistance NRk [kg] 40 70 100design resistance NRd [kg] 20 35 50Recommended loads Nrec [kg] 14 25 36SolId bRICk 7.5 MPACharacteristic resistance NRk [kg] 40 60 70design resistance NRd [kg] 20 30 35Recommended loads Nrec [kg] 14 21 25AeRATed CoNCReTe 600Characteristic resistance NRk [kg] 30 45 50design resistance NRd [kg] 15 25 25Recommended loads Nrec [kg] 11 18 18
Product codemm mm mm pcs. pcs.
kMW-05020 5 20 12 200 3600kMW-06030 6 30 12 100 1800kMW-06040 6 40 12 100 1200kMW-06050 6 50 12 100 1200kMW-06065 6 65 12 100 1200
HAMMER-IN FIXINGSZN-AL ALLOY WITH STEEL NAIL
ApprOvALS
Size 5 6Plug diameter d [mm] 5 6Hole diameter in substrate d0 [mm] 5 6Hole diameter in fixture dfix [mm] 6 7Minimum hole depth h0 [mm] 25 35Installation depth hnom [mm] 20 30Minimum substrate thickness hmin [mm] 40 50
MECHANICAL PROPERTIES
kMW-06
Substrate Non-cracked concrete C20/25Solid brick
15 MPaInstallation depth hnom [mm] 30 30Characteristic resistance NRk [kN] 3.55 2.00design resistance NRd [kN] 1.40 0.80Recommended loads Nrec [kN] 1.00 0.57
forcmin [mm] 50 50smin [mm] 100 100
kMW-06
Substrate Non-cracked concrete C20/25Solid brick
15 MPaInstallation depth hnom [mm] 30 30Characteristic resistance NRk [kg] 355 200design resistance NRd [kg] 140 80Recommended loads Nrec [kg] 100 57
forcmin [mm] 50 50smin [mm] 100 100
PERfORMANCE dATA IN [KN] PERfORMANCE dATA IN [Kg]
HAMMER-IN FIXINGS
deSCRIPTIoN/:For light duty fixings of metal constructions and sheet metal to solid building materials
MATeRIAl:Plug sleeve: zamak (Zn-Al). Nail: steel electro-zinc coated ~10 m.
SuITAble FoR uSe IN:ConcreteMasonryetc.
TYPICAl APPlICATIoN: Profiled metal roof and wall cladding.
SUBSTrATE
INSTALLATION
-
www.koelner.pl43
www.koelner.pl
PLASTERBOARD FIXINGS
Product codemm mm pcs. pcs.
dRA-01PluS 14 22 100 1800dRA-02PluS 14 28 100 1800dRA-03PluS 14 32 100 1800
Product codemm mm pcs. pcs.
dRA-01 14 22 100 1800dRA-02 14 28 100 1800dRA-03 14 32 100 1800
DRA-01
DRA-01PLUS
DRA-03PLUSDRA-02PLUSDRA-02 DRA-03
PLASTERBOARD AND CAVITY FIXINGSHAMMER-IN FIXINGS
Product codemm mm mm pcs. pcs.
kWd-08l100 8 100 PZ2 50 600kWd-08l120 8 120 PZ2 50 600kWd-08l140 8 140 PZ2 50 600
LONg ExpANSION ZONE HAmmEr FIxINgS WITH COUNTErSUNk HEAd ANd STEEL NAIL
deSCRIPTIoN/:For fast, repetitive fixing with minimal screwdriver work.
MATeRIAl:Plug sleeve: impact resistant co-polymer of polypropylene PP or polyamide PA 6.0 (Nylon). Nail: steel electro-zinc coated ~10 m.
FeATuReS: Reinforced screwhead - facilitates high knock-in loads with the added benefit of plug neck grip.Hammer in drive screw for fast installation. deforming crumple zone allows quick adjust- ment in uneven surfaces.Extended expansion zone gives extra grip.
deSCRIPTIoN/:No drill required simply pierce paper skin and screw home. Can be used in single and double thickness plasterboard. Ideal for use with either a power or standard Pozi driv screwdriver.Must only be used with screws provided.
FeATuReS: Flange prevents accidental push through in plasterboard.Short length ideally suited for dry-lined walls.
SuITAble FoR uSe IN:Plasterboard
SuITAble FoR uSe IN:lightweight concrete Cellular brick Hollow bricketc.
TYPICAl APPlICATIoN: Fixing stud battens to walls before cladding.
Fixing long runs of shelf supports. Fixing skirting boards to walls.
TYPICAl APPlICATIoN: Securing wall and ceiling fittings, installing
hooks and brackets etc. Fixing electrical boxes, sanitary ware, cable
trunking etc. Installing shelving units and wooden bat-
tens.
SUBSTrATE
SUBSTrATE
INSTALLATION
INSTALLATION
-
44www.koelner.plwww.koelner.pl
METAL CAVITY FIXINGS
Product codemm mm mm pcs. pcs.
with slotted screwSM-04020 8 425 3-5 100 1800SM-04032 8 440 4-10 100 1800SM-04046 8 454 15-21 100 1800SM-04059 8 466 34-38 100 1800SM-05037 11 546 6-12 100 1800SM-05052 11 561 6-16 100 1800SM-05065 11 573 16-30 100 1200SM-06037 13 646 8-12 100 1200SM-06052 13 661 8-18 100 1200SM-06065 13 673 16-30 50 600SM-06080 13 690 32-45 50 600SM-08080 13 890 32-45 50 600with angle hookSM-04032k 8 M455 4-10 100 1800with round hookSM-04032S 8 M470 4-10 100 1800
SM SM-04032K SM-04032S
TOOLSMETAL CAVITY FIXINGS SETTING
Product codepcs.
AT-88M dIY 1AT-88-RAWl professional 1
DIY PRoFeSSIonAL
deSCRIPTIoN:Fixing heavy objects securely in a variety of board materials.Fixtures can be removed and re-fitted, eg when moving radiators for redecoration.Can be secured using slotted or Pozi driv screw-driver.
FeATuReS: Combination head screw supplied. Integral anti-rotation lugs. Hinged legs positioned to maximise load capacity. one piece stamping, with integral thread and flange for increased reliability.
SuITAble FoR uSe IN:PlasterboardHardboard & Plywood.
TYPICAl APPlICATIoN: Coat hooks to hollow doors. Shelves and bathroom accessories to
standard plasterboard. Radiators and kitchen cabinets to double
thickness and tiled plasterboard.
PLASTERBOARD AND CAVITY FIXINGS
SUBSTrATE
INSTALLATION
-
www.koelner.pl45
www.koelner.pl
deSCRIPTIoN:Medium duty plasterboard fixing.Fixtures can be removed and replaced for redecoration.
MATeRIAl:Plug sleeve: impact resistant co-polymer of polypropylene PP or polya-mide PA 6.0 (Nylon). Nail: steel electro-zinc coated ~10 m.
SuITAble FoR uSe IN:PlasterboardHardboardPlywood
TYPICAl APPlICATIoN: Securing bathroom and kitchen fittings. Installation of ceiling fixtures, such as light fittings. Fixing light shelving, brackets and hooks.
deSCRIPTIoN:Cavity fixing with long threaded screw, ideal for double thickness plaster-board and large fixtures.
FeATuReS:Machine screw for ease of tightening. Heavy gauge material for superior loads. Spreads load over wide area for extra load capacity. Heavy gauge nut to prevent stripping under load..
SuITAble FoR uSe IN:Plasterboardlathe and plasterPlywoodHardwood
TYPICAl APPlICATIoN: Installing overhead lights, ceiling fans and other fixtures.
CAVITY FIXINGS
Product codemm mm mm pcs. pcs.
08g 8 3,535 12,5 100 180010g 10 4,050 9,5 100 1800with countersunk cross-head screw PZ208gl 8 3,545 12,5 100 180010gl 10 4,060 9,5 100 1800with angle hook08gk 8 3,535 12,5 100 180010gk 10 4,050 9,5 100 1800
08G
08GL
08GK
10GL
10GK
10G
PLASTERBOARD AND CAVITY FIXINGS
SPRING TOGGLES
Product codemm mm pcs. pcs.
with pan head metric screwSPo450 14 450 50 900with eyeSPo475Z 14 475 50 900with round hookSPo475 14 475 50 900
SPo450 SPo475Z
SPo475
SUBSTrATE SUBSTrATE
INSTALLATION INSTALLATION
-
46www.koelner.plwww.koelner.pl
Product codemm mm pcs. pcs.
TMS-05 6 20 100 1800
BRASS ANCHOR WITH HOOk
Product codemm mm pcs. pcs.
SRS-06063 6 63 100 2400
CEILING WIRE HANGER
Product codemm mm pcs. pcs.
kTS-08050 8 40 50 600
SLEEVE ANCHOR WITH HOOkApprOvALS
deSCRIPTIoN/:Mainly for fi xing lightweight ceilings and sus-pended ceilings to solid building materials. Fire resistant
MATeRIAl:electro-zinc coated steel.
SuITAble FoR uSe IN:ConcreteMasonryetc.
TYPICAl APPlICATIoN: lightweight suspended ceilings.
METAL HAMMER FIXINGS, HANGERS, CHANEL CONNECTORS
SUBSTrATE
SUBSTrATE
SUBSTrATE
INSTALLATION INSTALLATION
INSTALLATION
-
www.koelner.pl47
www.koelner.pl
METAL HAMMER FIXINGS, HANGERS, CHANEL CONNECTORS
Product codemm mm pcs.
Z-kSP 8 42 100
Product code mm mm pcs. pcs.gS-06040 6 40 100 1800gS-06065 6 65 100 1200
CEILING SPRING PIN
CEILING WEDGE ANCHOR
Product codemm pcs. kg
with eyeZ-l-0125-o 125 100 1,6Z-l-0250-o 250 100 2,8Z-l-0500-o 500 100 5,3Z-l-0750-o 750 100 7,8Z-l-1000-o 1000 100 10,0Z-l-1500-o 1500 100 15,3with hookZ-l-0125-H 125 100 1,6Z-l-0250-H 250 100 2,8Z-l-0500-H 500 100 5,3Z-l-0750-H 750 100 7,8Z-l-1000-H 1000 100 10,0Z-l-1500-H 1500 100 15,3
SuSPENDED WIRES
ANGLE SECTIONS
Product codepcs. kg
Z-Wd 100 1,23
DOuBLE SPRING SECuRING CLIP
FRAME FITTING SET
Product codemm pcs. pcs.
SZNP-08020 M820 50 1200
Product codepcs.
Z-kdP50 48Z-kdP75 48Z-kdP100 48
Product codepcs. kg
Z-ue30 100 3,85Z-ue65 100 5,46Z-ue90 100 6,40
FLEXIBLE DIRECT BRACkET
Product codepcs. kg
Z-eS-50/070 250 3,20Z-eS-50/120 250 4,70Z-eS-60/070 250 3,30Z-eS-60/120 250 4,80
uNIVERSAL DIRECT BRACkET
FOr dOOr FrAmE prOFILE INSTALLATION
deSCRIPTIoN:Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant.
MATeRIAl:steel 4.6 - electro-zinc coated ~10 m .
SuITAble FoR uSe IN:ConcreteMasonryetc.
TYPICAl APPlICATIoN: lightweight suspended ceilings.
deSCRIPTIoN:Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant.
MATeRIAl:steel 4.6 - electro-zinc coated ~10 m .
SuITAble FoR uSe IN:ConcreteMasonryetc.
TYPICAl APPlICATIoN: lightweight suspended ceilings.
ApprOvALS
INSTALLATION
INSTALLATION
-
48www.koelner.plwww.koelner.pl
CHANEL INTErSECTION CONNECTOr
Product codepcs. kg
Z-Wk 100 3,75
Product codepcs. kg
Z-Wkb 100 2,45
FLUSH TrANSvErSE CONNECTOr
Product codepcs. kg
Z-lPJ 100 5,20
Product codepcs. kg
Z-lW 100 4,50
Product codepcs. kg
Z-lkRZ 100 3,35
uNIVERSAL TIMBER CONNECTOR
CHANEL CONNECTOR
Product codemm pcs. kg
Z-WP170b 170 100 3,40
Product codel
mm pcs. kgZ-N-g0200 200 100 4,60Z-N-g0300 300 100 6,30
Product codepcs. kg
Z-N-WobR 100 4,90
Product codepcs. kg
Z-N-WT 100 3,80
Product codepcs. kg
Z-N-klM 100 0,61
HANgEr CLIp
TErmATEx HANgEr WITH AdjUSTABLE LENgTH
rOTArY CHANEL HANgEr WITH AdjUSTABLE LENgTH
* other lengths available
UppEr AdjUSTABLE LENgTH HANgEr
FASTENERS FOR SuSPENDED CEILINGS
CHANEL HANGER WITH SPRING CLIP
CHANEL HANGER WITH SPRING CLIP
Product codemm pcs. kg
Z-WkP170 170 100 3,10
DIRECT TIMBER CONNECTOR
Product codemm pcs. kg
Z-WP170 170 100 3,40Z-WP270 270 100 5,80
uNIVERSAL TIMBER CONNECTOR
CHANEL CONNECTORS, ANGLE SECTIONS
ROTARY CHANEL HANGERWITH SINgLE SprINg CLIp
WITH SprINg CLIpTERMATEX HANGER
Product codepcs. kg
Z-WobR 100 4,80
Product codepcs. kg
Z-ue30 100Z-ue65 100Z-ue90 100
-
www.koelner.pl49
www.koelner.pl
Product codecm pcs.
NAl-20 200 200NAl-25 250 200NAl-30 300 200
Product codecm pcs.
PC-53/25 250 10PC-83/25 250 10PC-103/25 250 10PC-123/25 250 10PC-153/25 250 10
Product code Widthmm cm pcs.
Nbo2-30 20 300 20Nbo3-30 30 300 20Nbo5-30 50 300 20
Product codecm pcs.
NAl-P-25 250 50
* box
* box
Product codecm pcs.
Ngk125-25 250 25 Product codecm pcs.
NAluk-30 300 50
Product codecm pcs.
NuNI-75 750 1
PVC PLASTERBOARD FINISHING BEAD
PVC CORNER ARCH BEAD
PVC TRuNKING BEAD
Product codecm pcs.
W6-25 250 25W6-30 300 25W10-25 250 25W10-30 300 25
PVC
* box
WET PLASTER BEAD
ALuMINIuM CORNER BEAD
PVC uNIVERSAL CORNER BEAD ROLL
ALuMINIuM PLINTH BEAD
ALuMINIuM CORNER HALF-BEAD
PLASTER & DRY-WALL BEADS
Product codecm pcs.
NAlM-25 250 20NAlM-30 300 25NAlM-25/50 250 20NAlM-30/50 300 20
WET PLASTER STEEL CORNER
ALU
-
50
* box
* box
* box
* box; ** with seal
* box
* box
Product codeMesh hole
sizecm mm pcs.
NAPS-25 250 1010 20
Product codecm pcs.
NkAP-20 200 25NkAP-25 250 25 Product code
cm pcs.NdYl-20 200 25NdYl-25 250 25NdYl-N-20 200 25NdYl-N-25 250 25
NDYL
NDYL-N
Product codecm pcs.
NPAR-20 200 30
Product codecm pcs.
Nlok-14 140 25Nlok-16 160 25Nlok-24 240 25Nlok-25** 250 25
Product codecm pcs.
NAlS-25 250 20NAlS-30 300 20
Product codemm cm pcs.
Nlu6-14 6 140 60Nlu6-24 6 240 60Nlu9-24 9 240 60
1.2
23
PVC EXPANSION JOINT CONTROL LATH
PVC WINDOW SEALING BEAD
PVC uNDER SILL BEAD
DRIP CORNER BEAD
ALuMINIuM CORNER BEAD WITH mESH
WITH mESH
WITH mESH
WITH mESH
WITH mESH
INTErNAL
PVC CORNER BEADWITH mESH
PVC WINDOW SEALING BEAD
THERMAL INSuLATION BEADS
Product codem pcs.
gkT-P20 20 72gkT-P45 45 48gkT-P90 90 24
FIBrEgLASS jOINT TApE
Product codem pcs.
gkT-S25 25 40
ACOUSTIC FOAm TApE*
Product codemm pcs.
gkT-A30 330 8gkT-A50 350 8gkT-A70 370 5gkT-A95 395 4
* lenght 30 m
TAPES
SELF-AdHESIvE jOINT TApE
-
Facad
e the
rmal
insula
tion f
ixing
sFac
ade t
herm
al ins
ulatio
n fixi
ngs
Fa
ca
de
t
he
rm
al
i
ns
ul
at
io
n
fi
xi
ng
s
Fa
ca
de
t
he
rm
al
i
ns
ul
at
io
n
fi
xi
ng
s
F
a
c
a
d
e
t
h
e
rm
a
l
in
su
la
ti
o
n
f
ix
in
g
s
Fa
ca
de
th
er m
al
i ns
ul a
t io
n f
i xi n
gs
-
52
Facade Thermal InsulaTIon FIxIngs
www.koelner.plwww.koelner.pl
no moisture penetration or nail corrosion e ectPrecise design of the pivot overmoulding and ideally adjusted internal pro le of the pin guarantee tight-ness of connection after assembly.
2
excellent thermal insulat-ing propertieslong overmoulding of metal pivot prevents occur-rence of thermal bridges and limits heat loss below 0,002 W/m2K.
1
no e ect of glue bulging or breaking on the facade. increased sti ness of the plate and pin according to guidelines of the eTiCs system is the guarantee of successful utilization of each facade.
3
maTerIalplug sleeve: impact resistant copolymer of polypropylene PP,
nail pin: electro zinc plated pin,
head coating: Polyamid Pa 6.0 (nylon) reinforced with ber glass.
TFIX-8MinsUlaTion fiXing
short assembly timeThe smallest depth of anchoring: 25 mm cheaper product25 mm anchoring instead of standard depth 40 mm results in 10% saving on the product cost.
5
european standardDiameter 8 mm compliant with european standards higher economy of work and less interferences with the base.
6
8 mm
ring nailComplete immobilization of the connector after the assembly process reducing vibration and horizontal movements of anchoring.
4
-
www.koelner.pl53
www.koelner.pl
FACADE THERMAL INSULATION FIXINGS
Product code Lmm mm pcs.KI-070 70 40 250KI-090 90 60 250KI-120 120 90 250KI-140 140 110 250KI-160 160 130 250KI-180 180 150 250KI-200 200 170 250KI-220 220 190 250
6010
25L
WITH HAMMER IN NYLON PINKI-10 INSULATION FIXINGS
6010
25L
APPROVAL
ETA-07/0291
INSULATION MATERIAL
SUBSTRATE
Substrate Concrete Solid brick 20 MPaFixing diameter d [mm] 10 10Hole diameter in substrate d0 [mm] 10 10Minimum hole depth h0 [mm] 35 35Installation depth hnom [mm] 25 25Minimum substrate thickness hmin [mm] 100 100
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN]
PERFORMANCE DATA IN [KG]
Size ConcreteC12/15ConcreteC16/20
Solid brick20MPa
Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kN] 0.50 0.60 0.50Design resistance NRd [kN] 0.25 0.30 0.25Recommended loads Nrec [kN] 0.18 0.21 0.18
Size ConcreteC12/15ConcreteC16/20
Solid brick20MPa
Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kg] 50 60 50Design resistance NRd [kg] 25 30 25Recommended loads Nrec [kg] 18 21 18
MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: polyamide PA 6.0 (Nylon) reinforced with bre glass.
INSTALLATION RECOMMENDATIONS:drill diameter: 10 mmminimum embedment depth: ETA 25 mm
INSTALLATION
-
54
FACADE THERMAL INSULATION FIXINGS
www.koelner.plwww.koelner.pl
Product code Lmm mm pcs.KI-090M 90 60 250KI-120M 120 90 250KI-140M 140 110 250KI-160M 160 130 250KI-180M 180 150 250KI-200M 200 170 250KI-220M 220 190 250KI-260M 260 230 200
6010
25L
6010
25L
WITH HAMMER IN STEEL PINKI-10M INSULATION FIXINGS
INSULATION MATERIAL
SUBSTRATE
Substrate Concrete Solid brick 20 MPaFixing diameter d [mm] 10 10Hole diameter in substrate d0 [mm] 10 10Minimum hole depth h0 [mm] 35 35Installation depth hnom [mm] 25 25Minimum substrate thickness hmin [mm] 100 100
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN]
PERFORMANCE DATA IN [KG]
Size ConcreteC12/15ConcreteC16/20
Solid brick20MPa
Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kN] 0.50 0.75 0.50Design resistance NRd [kN] 0.25 0.38 0.25Recommended loads Nrec [kN] 0.18 0.27 0.18
Size ConcreteC12/15ConcreteC16/20
Solid brick20MPa
Installation depth hnom [mm] 25 25 25Characteristic resistance NRk [kg] 50 75 50Design resistance NRd [kg] 25 38 25Recommended loads Nrec [kg] 18 27 18
MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pin.
INSTALLATION RECOMMENDATIONS:drill diameter: 10 mmminimum embedment depth: ETA 25 mm
INSTALLATION
APPROVAL
ETA-07/0291AT-15-8091/2009
-
www.koelner.pl55
www.koelner.pl
FACADE THERMAL INSULATION FIXINGS
Product code Lmm mm pcs.KI-120N 120 50 250KI-140N 140 70 250KI-160N 160 90 250KI-180N 180 110 250KI-200N 200 130 250KI-220N 220 150 250KI-260N 260 190 200KI-300N 300 230 200
60
L60
10 60
L60
10
60
L60
10
KI-10N LONG EXPANSION ZONE INSULATION FIXING
INSULATION MATERIAL
SUBSTRATE
SubstrateSolid brick
20MPa
Honeycomb clay brick12MPa
Lightweight concrete10MPa
Aerated concrete
500Fixing diameter d [mm] 10 10 10 10Hole diameter in substrate d0 [mm] 10 10 10 10Minimum hole depth h0 [mm] 70 70 70 70Installation depth hnom [mm] 60 60 60 60Min. substrate thickness hmin [mm] 100 100 100 100
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN]
PERFORMANCE DATA IN [KG]
SizeSolid brick
20MPa
Honeycomb clay brick12MPa
Lightweight concrete10MPa
Aerated concrete
500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kN] 0.90 0.40 0.30 0.90Design resistance NRd [kN] 0.45 0.20 0.15 0.45Recommended loads Nrec [kN] 0.32 0.14 0.11 0.32
SizeSolid brick
20MPa
Honeycomb clay brick12MPa
Lightweight concrete10MPa
Aerated concrete
500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kg] 90 40 30 90Design resistance NRd [kg] 45 20 15 45Recommended loads Nrec [kg] 32 14 11 32
WITH HAMMER IN STEEL PIN WITH PLASTIC COATED HEAD
MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pin.Head coating: polyamide PA 6.0 (Nylon) reinforced with ber glass.
INSTALLATION RECOMMENDATIONS:drill diameter: 10 mmminimum embedment depth: ETA 25 mm
INSTALLATION
APPROVAL
ETA-07/0221
-
56
FACADE THERMAL INSULATION FIXINGS
www.koelner.plwww.koelner.pl
SubstrateSolid brick
20MPa
Honeycomb clay brick12MPa
Lightweight concrete10MPa
Aerated concrete
500Fixing diameter d [mm] 10 10 10 10Hole diameter in substrate d0 [mm] 10 10 10 10Minimum hole depth h0 [mm] 70 70 70 70Installation depth hnom [mm] 60 60 60 60Min. substrate thickness hmin [mm] 100 100 100 100
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN]
PERFORMANCE DATA IN [KG]
SizeSolid brick
20MPa
Honeycomb clay brick12MPa
Lightweight concrete10MPa
Aerated concrete
500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kN] 1.20 0.40 0.30 0.75Design resistance NRd [kN] 0.60 0.20 0.15 0.38Recommended loads Nrec [kN] 0.43 0.14 0.11 0.27
SizeSolid brick
20MPa
Honeycomb clay brick12MPa
Lightweight concrete10MPa
Aerated concrete
500Installation depth hnom [mm] 60 60 60 60Characteristic resistance NRk [kg] 120 40 30 75Design resistance NRd [kg] 60 20 15 38Recommended loads Nrec [kg] 43 14 11 27
KI-10NS LONG EXPANSION ZONE INSULATION FIXINGS
60
L60
10 60
L60
10
Product code Lmm mm pcs.KI-140NS 140 70 250KI-160NS 160 90 250KI-180NS 180 110 250KI-200NS 200 130 250KI-220NS 220 150 250KI-260NS 260 190 200KI-300NS 300 230 200
INSULATION MATERIAL
SUBSTRATE
WITH SCREW IN STEEL PIN WITH PLASTIC COATED HEAD
MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pinHead Coating: polyamide PA 6.0 (Nylon) reinforced with ber glass.
INSTALLATION RECOMMENDATIONS:drill diameter: 10 mmminimum embedment depth: ETA 60 mm
INSTALLATION
APPROVAL
ETA-07/0221
-
www.koelner.pl57
www.koelner.pl
FACADE THERMAL INSULATION FIXINGS
Substrate ConcreteC12/15Solid brick
12 grade
Structural hollow clay tile
12 grade
Silicate brick
12 grade
Silicate hollow brick
12 grade
Solid lightweight concrete
DIN 18152
Hollow light-weight concrete
DIN 18151
Fixing diameter d [mm] 8 8 8 8 8 8 8Hole dia. in substrate d0 [mm] 8 8 8 8 8 8 8Minimum hole depth h0 [mm] 35 35 35 35 35 35 35Installation depth hnom [mm] 25 25 25 25 25 25 25Min. substrate thickness hmin [mm] 100 100 100 100 100 100 100
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN]
PERFORMANCE DATA IN [KG]
Substrate ConcreteC12/15Solid brick
12 grade
Structural hollow clay tile
12 grade
Silicate brick
12 grade
Silicate hollow brick
12 grade
Solid lightweight concrete
DIN 18152
Hollow light-weight concrete
DIN 18151
Installation depth hnom [mm] 25 25 25 25 25 25 25Characteristic resistance NRk [kN] 1.50 1.50 0.60 1.50 0.90 0.50 0.50Design resistance NRd [kN] 0.75 0.75 0.30 0.75 0.45 0.25 0.25Recommended loads Nrec [kN] 0.54 0.54 0.21 0.54 0.32 0.18 0.18
Size ConcreteC12/15Solid brick
12 grade
Structural hollow clay tile
12 grade
Silicate brick
12 grade
Silicate hollow brick
12 grade
Solid lightweight concrete
DIN 18152
Hollow light-weight concrete
DIN 18151
Installation depth hnom [mm] 25 25 25 25 25 25 25Characteristic resistance NRk [kg] 150 150 60 150 90 50 50Design resistance NRd [kg] 75 75 30 75 45 25 25Recommended loads Nrec [kg] 54 54 21 54 32 18 18
INSULATION MATERIAL
SUBSTRATE
WITH HAMMER IN STEEL PIN WITH PLASTIC COATED HEADTFIX-8M INSULATION FIXINGS
INSULATION MATERIAL
60
L
8
25
60
L
8
25
60
L
8
25
Product code Lmm mm pcs.TFIX-8M-095 95 60 200TFIX-8M-115 115 80 200TFIX-8M-135 135 100 200TFIX-8M-155 155 120 200TFIX-8M-175 175 140 200TFIX-8M-195 195 160 200TFIX-8M-215 215 180 100TFIX-8M-235 235 200 100TFIX-8M-255 255 220 100TFIX-8M-275 275 240 100TFIX-8M-295 295 260 100
MATERIAL:Plug Sleeve: impact resistant copolymer of polypropylene PPNail Pin: electro zinc plated pinHead Coating: polyamide PA 6.0 (Nylon) reinforced with ber glass.
INSTALLATION RECOMMENDATIONS:drill diameter: 8 mmminimum embedment depth: ETA 25 mm
INSTALLATION
APPROVAL
ETA-07/0336
-
58
Facade Thermal InsulaTIon FIxIngs
www.koelner.plwww.koelner.pl
Kwl InsulaTIon holdIng Flange
Product code mm pcs.
polyamide PA 6.0, reinforced with bre glassKWL-90 90 250KWL-110 110 200KWL-140 140 200impact resistant copolymer of polypropyleneKWL-90-PP 90 250KWL-140-PP 140 200
aPProval
eTa-07/0221eTa-07/0291eTa-07/0336insUlaTion
MaTerialsUBsTraTe
for all type of base material
KWL-140
KWL-110
KWL-90
MATERIAL:Polyamide PA 6.0 (nylon) reinforced with bre glass, impact resistant copolymer of polypropylene PP.
1
40 m
m
140
mm
Product code Lmm mm pcs.Insulation xings with hammer in nylon pinB-W-KI-090 90 60 100B-W-KI-120 120 90 100B-W-KI-140 140 110 100B-W-KI-160 160 130 100B-W-KI-180 180 150 100B-W-KI-200 200 170 100
in BagsFacade InsulaTIon FIxIngs
Product code Lmm mm pcs.Insulation xings with hammer in steel pinB-W-KI-090M 90 60 100B-W-KI-120M 120 90 100B-W-KI-140M 140 110 100B-W-KI-160M 160 130 100B-W-KI-180M 180 150 100B-W-KI-200M 200 170 100
aPProval
mm pcs.Insulation xings with hammer in steel pin
100100100
INSTALLATION
-
www.koelner.pl59
www.koelner.pl
Facade Thermal InsulaTIon FIxIngs
WiTh MasKing CaPKc InsulaTIon Flange
Product code
KC 60 5.5 200
60
15
aPProval
aT-15-4627/2006
insUlaTion MaTerial
sUBsTraTe
applicable to: UC screws for wood WB screws for trapezoid sheet
Substrate Steel Timber Plywood OSB chipboard Timber Plywood OSB chipboardFixing type KC + WB UC-05 UC-06Fixing diameter d [mm] 4.8 5.0 5.0 5.0 6.0 6.0 6.0Hole diameter in substrate d0 [mm] N/A N/A N/A N/A N/A N/A N/AMinimum hole depth h0 [mm] N/A N/A N/A N/A N/A N/A N/AInstallation depth hnom [mm] N/A 20 20 18 25 20 18Minimum substrate thickness hmin [mm] 0.75 20 20 18 25 20 18Maximum substrate thickness hmax [mm] 2.5 - - - - - -
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN]
PERFORMANCE DATA IN [KG]
Substrate Steel Timber Plywood OSB chipboard Timber Plywood OSB chipboardFixing type KC + WB UC-05 UC-06Installation depth hnom [mm] 0,75 20 20 18 25 20 18Characteristic resistance NRk [kN] 0.90 0.70 0.70 0.70 0.80 0.80 0.80Design resistance NRd [kN] 0.45 0.35 0.35 0.35 0.40 0.40 0.40Recommended loads Nrec [kN] 0.32 0.25 0.25 0.25 0.29 0.29 0.29
Substrate Steel Timber Plywood OSB chipboard Timber Plywood OSB chipboardFixing type KC + WB UC-05 UC-06Installation depth hnom [mm] 0,75 20 20 18 25 20 18Characteristic resistance NRk [kN] 90 70 70 70 80 80 80Design resistance NRd [kN] 45 35 35 35 40 40 40Recommended loads Nrec [kN] 32 25 25 25 29 29 29
MATERIAL:Impact resistant copolymer of polypropylene PP.
INSTALLATION RECOMMENDATIONS:minimum embedment depth: timber 20 mm, steel 0.75 mm
KC + UC KC + WB
INSTALLATION
-
60
Facade Thermal InsulaTIon FIxIngs
www.koelner.plwww.koelner.pl
mKI FIre resIsTanT meTal InsulaTIon supporTs
Product codemm mm pcs.
MKI-090/8 90 30 250MKI-110/8 110 50 250MKI-140/8 140 80 250MKI-170/8 170 110 250MKI-200/8 200 140 250
aPProval
aT-15-8092/2009
insUlaTion MaTerial
sUBsTraTe MATERIAL:electro zinc plated steel, stainless steel (made to order).
INSTALLATION RECOMMENDATIONS:drill diameter: 8 mmminimum embedment depth: ETA 50 mm
Substrate ConcreteC20/25Solid brick 15 grade
Silicate brick
15 grade
Solid lightweight concrete
600Fixing diameter d [mm] 8 8 8 8Hole diameter in substrate d0 [mm] 8 8 8 N/AMinimum hole depth h0 [mm] 60 60 60 N/AInstallation depth hnom [mm] 50 50 50 50Min. substrate thickness hmin [mm] 100 100 100 100
MECHANICAL PROPERTIES
PERFORMANCE DATA IN [KN