Kingspan Gefinex Gefitas - Home - · PDF fileKingspan® Gefi nex® Gefi tas®...
Transcript of Kingspan Gefinex Gefitas - Home - · PDF fileKingspan® Gefi nex® Gefi tas®...
02/04/16
Kingspan®
Gefinex®
Gefitas®
WATERPROOFING MEMBRANES
Kingspan® Gefi nex
® Gefi tas®
Overview
Area of use
Construction waterproofing on floor slab to counteract
rising damp in accordance with DIN 18195 Part 4.
Description
Kingspan® Gefinex® Gefitas® PE moisture barriers have
been developed by specialists and prove their
established status every year with a laid surface area of
more than 3 million square metres. There are no
limitations to the choice of floor covering consumers
wish to make. They are installed in accordance with
DIN 18195 Part 4 on top of floor slabs.
A compound consisting of a PE film and a closed-cell
polyethylene foam, which protects the waterproofing
membrane from damage and levels out any
unevenness of the floor at the same time.
Some of the noteworthy features of the Gefitas® PE
moisture barriers include their enormous robustness,
high ductility, extreme temperature flexibility,
very good vapour denseness and their exceptional
chemical resistance. Kingspan® Gefinex® Gefitas® PE
moisture barriers do not contain any softening agents
or other additives, they are bitumen-resistant and
are absolutely safe to use in living spaces and public
buildings such as kindergardens, schools, hospitals, etc.
All Kingspan® Gefinex® Gefitas® system components
are coordinated with one another in such a way that
installation is always safe and simple. The joint strip
R300, the fixing tape, sealant, adhesive, and sealing
tape all have a supportive role to play in ensuring that
the laying process is executed correctly. Our laying
recommendation provides precise details of how the
Kingspan® Gefinex® Gefitas® waterproofing system can
be applied and processed in the best possible way
for any situation.
Kingspan® Gefi nex® Gefi tas® PE barriers are availa-
ble in the following variants:
Kingspan® Gefi nex® Gefi tas® - PE 3/300 Original
Kingspan® Gefi nex® Gefi tas® - PE 3/300 Standard
Kingspan® Gefi nex® Gefi tas® - PE 3/300 AL
Kingspan® Gefi nex® Gefi tas® DACH - PE 1/250
Kingspan® Gefi nex® Gefi tas® DACH - PE 1/400
A moisture barrier prevents moisture from passing via capillary transport processes into the floor construction or
living space and causing detrimental effects as a result. It protects us from any damage to health that could be
caused, for example, from mould formation.
Certifi cations & Standards
The use of Kingspan® Gefi nex® Gefi tas® moisture barriers is regulated in the form of a general German building authority
test certifi cate ('AbP'). In addition, the Kingspan® Gefi nex® Gefi tas® system is also externally monitored by the 'MPA
Braunschweig' and tested for quality standards on an ongoing basis. Kingspan® Gefi nex® Gefi tas® moisture barriers
and vapour barriers are standardised in accordance with DIN EN 13967, classifi ed as fi re class B2 per DIN 4102-1 and
bear the CE mark accordingly. Moreover, the products have been tested for VOCs (volatile organic compounds that can
be harmful to human health) and classifi ed as harmless.
• Universal processing
for all substrate layers
• Fast and time-saving processing
• Immediate and � ameless processing
• Environmentally sound
and health-conscious
• Free of bitumen and softening agents
• Free of odour nuisances
• System and component solutions
• Comprehensive system of accessories
• Outstanding price-performance ratio
• Certifi ed and approved system
• 'Made in Germany‘
Benefi ts
PE 3/300 Original PE 3/300 Standard
* 1mm = 1000 µm / ** SD value = „vapour diffusion equivalent air layer thickness” / The term SD value is a theoretical value that determines the vapour permeability of a building
material. The higher the value, the less moisture diffuses (seeps) through the material.
The cost-effective alternative to the 'Kingspan® Gefi nex®
Gefi tas® Original' with a 200 µm PE fi lm. A high-quality product,
'Made in Germany', that forms part of the Kingspan® Gefi nex®
product range. The 200 µm PE fi lm and the 3 mm PE foam are
joined together with a fi rmly bonded lamination.
Product Properties
Extremely resistant to mechanical damage and suitable for
instalment on rough, uneven concrete substrates. An adhesive
tape integrated along the length of the membrane allows for
the sheets to be easily joined up to one another. Low structural
height in the area of overlap.
Benefi ts
• Economical to process
• High quality, 'Made in Germany'
• Outstanding price-performance ratio
• Width of the sheet incl. overlap
Product Information
SD**-value ≥ 60 m
The original and robust moisture barrier with a 300 µm* PE fi lm.
It is a cutting-edge quality product, 'Made in Germany‘ and
developed by Kingspan Gefi nex GmbH. The 300 µm PE fi lm
and the 3 mm PE foam are joined together with a fi rmly bonded
lamination.
Product Properties
Extremely resistant to mechanical damage and suitable for
instalment on rough, uneven concrete substrates. An adhesive
tape integrated along the length of the membrane allows for the
sheets to be easily linked up to one another.
Benefi ts
• Economical to process
• High quality, 'Made in Germany'
• Outstanding price-performance ratio
Product Information
SD**-value ≥ 100 m
Article Widthm
Rollm
Rollqm
Rollkg
perPalette
13022 1,25 40 50 19 8
Article Widthm
Rollm
Rollqm
Rollkg
perPalette
14146 1,25 40 50 16 8
Areas of use
Construction waterproofing on floor slab to counteract rising damp in accordance with DIN 18195 Part 4.
Kingspan® Gefi nex
® Gefi tas®
PE 3/300 AL
The moisture barrier with an integrated aluminium fi lm for
specialist requirements. The Kingspan® Gefi nex® Gefi tas®
PE 3/300 AL consists of an aluminium fi lm, which is laminated
for protection between a 150 µm PE fi lm and a 3 mm
PE foam layer.
Product Properties
The product is characterised by a high resistance to perforation,
ductility and tensile strength. An adhesive tape integrated along
the length of the membrane allows for the sheets to be easily
joined up to one another.
Benefi ts
• Economical processing
• High quality, 'Made in Germany'
• Outstanding price-performance ratio
Product Information
SD**-value ≥ 1500 m
Article Widthm
Rollm
Rollqm
Rollkg
perPalette
14495 1,25 40 50 13 8
The Kingspan® Gefinex® Gefitas® PE vapour barrier 1/400 is
made from a high-quality, closed-cell 1 mm PE foam and a
400 µm PE laminate layer. This means that a fleece is no longer
required as an additional layer for rough substrates.
The integrated sealing edge means that the sheets can be easily
bonded to one another. Together with the compatible Kingspan®
Gefinex® Gefitas® accessories, air-tightness is ensured for the
vapour-proof and air-tight joints as per the requirements.
Product Information
SD**-value ≥ 240 m
PE Dach 1/250 with Sealing Tape
The Kingspan® Gefinex® Gefitas® PE vapour barrier 1/250
consists of a high-quality, closed-cell 1 mm PE foam and a
250 µm PE laminate layer. This means that a fleece is no
longer required as an additional layer for rough substrates.
The integrated sealing edge means that the sheets can be easily
bonded to one another. Together with the compatible Kingspan®
Gefinex® Gefitas® accessories, air-tightness is ensured for the
vapour-proof and air-tight joints as per the requirements.
Product Information
SD**-value ≥ 100 m
PE Dach 1/400 with Sealing Edge
Areas of Use
For use on flat roofs for preventing the formation of condensation in wood, steel and concrete constructions.
Product Properties
The Kingspan® Gefinex® Gefitas® PE vapour barriers 1/250 and 1/400 have a high resistance to perforation, as well as a high level of
ductility and tensile strength. They are also penetration-proof making them safe to walk on.
They do not contain any softening agents or other harmful additives.
Benefits
• Economical to process • High quality 'Made in Germany' • Outstanding price-performance ratio
Article Widthm
Rollm
Rollqm
Rollkg
perPalette
14377 1,50 50 75 34 11
Article Widthm
Rollm
Rollqm
Rollkg
perPalette
14378 1,50 50 75 34 11
A vapour barrier in the roof prevents any water vapour contained in the room air cavity from getting into the insulating layer and roof
truss. In addition, it optimises the windproofi ng of the roof construction.
Kingspan® Gefi nex
® Ge fi tas®
Assessed to ISO 50001:2011
Certificate number 0001 EnMS
4163
Assessed to ISO 9001, ISO 14001 & OHSAS 18001
LPCB Cert No. 388
Kingspan® Gefi nex
® Gefi tas®
Accessories
System Joint Strip
R300
• secure
System Joint Strip
R300 Plus
• comprehensive
System Joint Strip R300 has been specially developed to
ensure that the Kingspan® Gefi nex® Gefi tas® moisture barrier is
conjoined to the outer wall barrier or rising structural elements
('white tank') in the proper and correct manner. With the R300,
the inner and outer corners can be formed. It also serves as a
way of securing the moisture barrier.
System Joint Strip R300 Plus has been specially developed to
ensure that the Kingspan® Gefi nex® Gefi tas® moisture barrier is
conjoined to the outer wall barrier or rising structural elements
('white tank') in the proper and correct manner. The R300 Plus
also features a 10 mm � anking insulation strip in order to form
the perimeter edge around the � oor screed.
Fixing Tape is a highly elastic and malleable butyl adhesive tape
for the formation of corners, as well as to ensure additional wa-
terproofi ng from any possible permeations, e.g. supports, pipes,
etc., to repair any apertures and link up the short-end joints of
the membrane sheets.
Sealing Tape is ideally suited for the joining of Kingspan®
Gefi nex® Gefi tas® waterproofi ng membranes to the outer wall
barrier and for linking up the short-end joints of the membrane
sheets.
Adhesive in the cartridge guarantees that it can be applied
precisely and simply when joining the waterproofi ng membrane
to the outer wall barrier and when linking up the short-end joints
of the membrane sheets.
Fixing Tape
• � exible
Sealing Tape
• meticulous
Sealant & Adhesive
• precise
A r t i c l e W i d t h/ c m R o l l / m B a g / k g p e r B a g
13029 20 25 13 5
A r t i c l e W i d t h/ c m R o l l / m B a g / k g p e r B a g
14800 25 25 9 4
A r t i c l e W i d t h/ c m R o l l / m C a r t o n/ k g p e r C a r t o n
13558 10 5 6 4
A r t i c l e C o nt e nt / m l C a r t o n/ k g p e r C a r t o n
14214 300 6 12
A r t i c l e W i d t h/ c m R o l l / m C a r t o n/ k g p e r C a r t o n
13024 2 15 5 8
The information provided in this print publication is based on our current state of knowledge and experiences. It does not constitute any guarantee in the legal sense.
Any use of this information should always take the specifi c conditions of the use case into consideration, in particular with regard to structural, physical construction and legal
construction aspects. (Status: 01/2016)
As Team Leader of Trade, I am responsible, together with my colleagues in the external
and internal sales force, not only for the fi nancial success of our company, but also, more
importantly, for the success of our customers in their distribution of our products and
services. The needs and societal requirements placed on modern products and
companies are what dictate our actions here.
We sales employees act as points of contact both for customers and for internal
departments. The values we stand for include collaborative partnership, high competence
and reliability, as well as open communication based on fi nding solutions.
This focus on solutions is, in my view, based above all in the development of markets through active demand creation
together with the consultancy of architects and construction planners, and the conception of new innovative products
by means of perceptive market observation. Conceiving marketing strategies for our products through close cooperation
with our customers in the fi elds of trade and craftsmanship is a key component here. One of the most important remits
in my job is commitment to the use of energy-effi cient and above all sustainable products, which preserve resources and
have the lowest possible environmental impact. With every consultation meeting I hold with building owners, architects,
construction planners and retail traders, understanding for this issue grows, along with a willingness to fi nd integrated
solutions.
Together with my team, I am dedicated to ensuring the high quality of Kingspan Gefi nex products and their sustainability
in production and application, and I look forward to every customer I can support in this respect.
René Rosenkranz
Kingspan Gefi nex GmbHJakobsdorfer Straße 1 · D -16928 Pritzwalk
+ 49 (0) 3395 752 100 · Fax: + 49 (0) 3395 752 121 · info@kingspangefi nex.de
www.kingspangefi nex.de
® Kingspan, Gefi nex, Gefi cell, Gefi con, Gefi dehn, Gefi tas and the Lion Device are Registered Trademarks of the Kingspan Group plc in Germany.
All rights reserved.
Commitment for our Customers