KFM Series Mud Pump GENERAL PUMPA member of the Interpump ...
2
KFM Series FEATURES GENERAL PUMPA member of the Interpump Group TRIPLEX TRIPLEX • High pressure “MUD” pump. • Specifically designed to pump mixtures of water, bentonite and/or polymers typical of mining and directional drilling applications. • 17-4 stainless steel valves are guided to promote efficient delivery of fluids. Seating areas are treated with abrasion resistant material to extend life of wearing surfaces. • Energized packings/seals are produced from high density polyethylene • Extended crosshead features open design and double lip oil seals to minimize unwanted collection of drilling fluids. • Patent pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion. • High performance aluminum alloy connecting rods permit higher loads while reducing overall weight. This reduces vibrations and off center loads on the bearing for longer life and quieter operation. • Easily coupled to SAE "C" hydraulic motor when using 71 series flange/coupler kit. • Splash lubrication. Pump Model KFM40A Maximum Volume 30.0 GPM Maximum Discharge Pressure 1500 PSI Horsepower 30 HP Maximum Pump Speed 600 RPM Plunger Bore 1.571 in./40mm Plunger Stroke 1.9 in. / 50 mm Crankcase Oil Capacity 124.4 oz. Inlet Port Thread 1-1/2” NPT Discharge Port Thread 1” NPT Shaft Diameter 1.6 in. / 40 mm Weight 160 lbs. Dimensions 23.6” x 10” x 9.9” SPECIFICATIONS High Pressure “Mud” Pump MATERIALS • High resistance light alloy crankcase. • Stainless steel manifold, nickel treated. • Tapered roller rim bearings. • Special antifriction light alloy connecting rods. • Forged alloy steel crankshaft, hardened, tempered and nitrited. • Cast iron piston guide, nickel treated. • Solid ceramic plungers, with ceramic coated Stainless Steel extension. • Valve disks and seats 17/4 Stainless Steel. General Pump is a member of the Interpump Group * Not the actual pump. The KFM40A is a member of the KF Series of pumps, which is pictured above.
Transcript of KFM Series Mud Pump GENERAL PUMPA member of the Interpump ...
KFM Series
FEATURES
GENERAL PUMPA member of the Interpump Group
TRIPLE
XTR
IPLE
X
• High pressure “MUD” pump.
• Specifically designed to pump mixtures of water,bentonite and/or polymers typical of mining anddirectional drilling applications.
• 17-4 stainless steel valves are guided to promoteefficient delivery of fluids. Seating areas are treatedwith abrasion resistant material to extend life ofwearing surfaces.
• Energized packings/seals are produced from highdensity polyethylene
• Extended crosshead features open design and doublelip oil seals to minimize unwanted collection of drillingfluids.
• Patent pending, symmetrical power end designfeaturing top and bottom mounting holes allowing foreasy left to right shaft conversion.
• High performance aluminum alloy connecting rodspermit higher loads while reducing overall weight.This reduces vibrations and off center loads onthe bearing for longer life and quieter operation.
• Easily coupled to SAE "C" hydraulic motor when using71 series flange/coupler kit.
• Splash lubrication.
Pump Model KFM40A
Maximum Volume 30.0 GPMMaximum Discharge Pressure 1500 PSIHorsepower 30 HPMaximum Pump Speed 600 RPMPlunger Bore 1.571 in./40mmPlunger Stroke 1.9 in. / 50 mmCrankcase Oil Capacity 124.4 oz.Inlet Port Thread 1-1/2” NPTDischarge Port Thread 1” NPTShaft Diameter 1.6 in. / 40 mmWeight 160 lbs.Dimensions 23.6” x 10” x 9.9”
SPECIFICATIONS
High Pressure “Mud” Pump
MATERIALS• High resistance light alloy crankcase.
• Stainless steel manifold, nickel treated.
• Tapered roller rim bearings.
• Special antifriction light alloy connecting rods.
• Forged alloy steel crankshaft, hardened, tempered andnitrited.
• Cast iron piston guide, nickel treated.
• Solid ceramic plungers, with ceramic coated StainlessSteel extension.
• Valve disks and seats 17/4 Stainless Steel.General Pump is a
member of theInterpump Group
* Not the actual pump. The KFM40A is a member of theKF Series of pumps, which is pictured above.
KFM Series Mud Pump GENERAL PUMPA member of the Interpump Group
GGEENNEERRAALL PPUUMMPP 1174 Northland Drive • Mendota Heights, MN 55120Phone: (651)686-2199 • Fax: (800)535-1745 • e-mail: [email protected] • www.generalpump.com
DIMENSIONAL DRAWING
