Key Benefits - Farid European Group

Key Benefits:� Designed and constructed for robust reliability

� Proven Swing Link mechanism transmits more packing force into load

� Reduced packing pressures for increase hydraulic longevity

� Greater load density for optimum payload

� Simple design producing reduced maintenance costs

� Full range of body sizes from 16 to 26m3

� Compatible With full range of Domestic and Trade Bin Lifts

W_A1

ALFAF

FB1

FBL1

FB2

W_A2 FB3

V12V

FB3B

FBKE

FBAH

FBA1

FBKVE

FBKE FBKE

FBKVE

FBKE

FBA2

GAMMAB

FBKE

FBKVE

FBKE

FB3A

FBKVE

FBKE FBKE

V22V

FBKE

FBKVE

FBKE FBKE

FBKVE

FBKE

FBHE

FBF

FBAO

W_G2 FB4 W_B2 W_B1

H12V

FBKE FBKE

FBKVE

FB7

Farid Hillend Engineering LimitedTaxi Way, Hillend Industrial Estate, Dunfermline,Fife KY11 9ES United Kingdom

Tel: +44 (0) 1383 823625Fax: +44 (0) 1383 824062

[email protected] www.hillendeng.com Jan20 - E&OE

PowerLink - Helping keep our local environment free of refuse whilstdoing its bit for the global environment.

Quality

- Re

liability - D

urab

ility - After S

ales Care - Quality

- Reliability - Durability

- After Sales Care

W_A1

ALFAF

FB1

FBL1

FB2

W_A2 FB3

V12V

FB3B

FBKE

FBAH

FBA1

FBKVE

FBKE FBKE

FBKVE

FBKE

FBA2

GAMMAB

FBKE

FBKVE

FBKE

FB3A

FBKVE

FBKE FBKE

V22V

FBKE

FBKVE

FBKE FBKE

FBKVE

FBKE

FBHE

FBF

FBAO

W_G2 FB4 W_B2 W_B1

H12V

FBKE FBKE

FBKVE

FB7

PowerLink with UniPod

Fire Hydrant Connection Under Body WeighingEquipment

Liquid Catchment Tray Energy Saving ECO-PTO Multi Density ControlSystem

Wear is kept to a minimum with the unique Farid Hillend full-cycle, Swinglinkcompaction mechanism developing less friction than conventional channelledcompaction systems ensuring that a greater force is directed into the load.

The reduction of friction increases durability of materials improving whole lifecosts. Incorporating the most up to date hydraulic system design, the powerlinkoffers unique and unparalleled performance, reduced downtime, lowermaintenance costs and less risk of environmental pollution. Farid HillendEngineering offers a variety of options for body sizes on the powerlink withcubic capacities of 16-26m³.

The Intelligent Canbus Electrics and advanced hydraulics allow greater flexibilitywith waste densities when dealing with different recycling commodities. Allpush buttons, relays and switches are protected to IP 65. Simple convenientn/s and o/s control panel incorporating emergency stop buttons.

The refuse collection body and equipment iscompatible with any suitable 4, 6 or 8 wheeled chassisof the customer’s choice.

Waste Unloading

Unloading of waste is achieved by a conventional ejection plate ensuringcomplete discharge of waste materials collected.

Options - a full range of options is available, please ask for details. Featured Options:


Tel: +44 (0) 1383 823625Fax: +44 (0) 1383 824062


MAIN FEATURES� Modelled on bigbite Swinglink design� Canbus electrical control system. Leading edge technology� Packer bearings & tailgate hinges greased via outside hopper� Inverted cylinders with rods uppermost & case hardened� Large hopper capacity� Hardened chrome plated pins & composite bushes� DIN mounted hoist frame/open back configuration, standard� Uncluttered hopper due to swinglink design� Loading mechanism programmed in unison with split Autolift� Dual tailgate controls as standard

� 8mm abrasion resistant steel hopper floor & sides� Additional Sacrificial wear plates fitted to high wear areas� 4.7mm high strength steel floor� Front of body screened with mesh� Body mounted using all flexible components� Galvanised hydraulic pipes, fittings & fasteners pre-paint� Unique paint application process� Ejector rollers are replaceable without removing plate

Body Specifications PLK-16 PLK-19 PLK-21 PLK-23 PLK-26Body Volume (m3) 16 19 21 23 26 Overall Length - Body and Tailgate (mm) 5783 6443 6995 7155 8132 Overall Length - Tailgate Raised (mm) 6753 7413 7965 8125 9102 Overall Width (mm) - same for all 2530 Overall Height - Tailgate Lowered (mm)a 2267 2190 2190 2190 2190 Overall Height - Tailgate Raised (mm)a 4038 3962 3962 3962 3962Gross Weight (approx) (kg) 6150 6500 6850 6935 7740 a. Height from the bottom of the long-member.

Tailgate SpecificationsSwept Capacity (m3) - same for all 2.13 Hopper Loading Width (mm) - same for all 2032Cycle Time 22 - 24 secondsLoading Height (from bottom of long-member) Even with bottom of long-member, except PLK-16 which is 80mm above.Wheelie Bin Capacities (figures are hoist dependant) 120 L, 240 L and 360 L and 1100 L (conforming to EN840)

Electrical Specifications In Cab External-Kerbside External-OffsideControl Type Controls “CE" certified, IP-66 rated. PLC based.Cab Control Box � � �

Emergency Stop � � �

Auto Control Box � � �

Manual Control Box � � �

Tailgate Lower � (one metre) � �

Ejector and Tailgate Raise � � �

Standard � Not Fitted � Optional �

Technical SpecificationW_A1

ALFAF

FB1

FBL1

FB2

W_A2 FB3

V12V

FB3B

FBKE

FBAH

FBA1

FBKVE

FBKE FBKE

FBKVE

FBKE

FBA2

GAMMAB

FBKE

FBKVE

FBKE

FB3A

FBKVE

FBKE FBKE

V22V

FBKE

FBKVE

FBKE FBKE

FBKVE

FBKE

FBHE

FBF

FBAO

W_G2 FB4 W_B2 W_B1

H12V

FBKE FBKE

FBKVE

FB7

Quali

ty - R

eliab

ility -

Durab

ility -

Afte

r Sale

s Care

QUALITY ENGINEERED


Tel: +44 (0) 1383 823625Fax: +44 (0) 1383 824062


Notes:1. All Farid Hillend Engineering equipment combinations on your chosen chassis cab variant

must be fully qualified and approved for legal compliance by our technical salesdepartment.

2 . Our technical sales department will provide an indicative weight calculation and layoutdrawing for your chosen equipment / chassis combination.

3. The weights and payload data supplied will be calculated in accordance with chassis cab,and, other third party component part manufacturers technical information supplied to ourtechnical sales department.

4. Any indicated engine rpm speed setting figures are dependent on individual chassis cabmodel derivatives and their respective engine / transmission performance characteristics.

5. All designs, specifications and component parts are subject to change at the manufacturerssole discretion and at any time without prior notice.

6. All weights, payload indications and vehicle dimensions are subject to manufacturingtolerance of ±5%.

7. Any payload indications are subject to quoted / example ‘waste density’ figures, shown inour calculations.

8. Data published herein is for information purposes only and shall not be construed towarrant suitability of the unit for any particular purpose as performance characteristicsmay vary with the operational conditions encountered.

9. The only warranty is our standard written “Warranty Statement Terms & Conditions” for thebrand product at the time of delivery shipment.

10. ©2018 Farid Hillend Engineering Limited. All rights reserved.

Hydraulic Specifications PLK-16 PLK-19 PLK-21 PLK-23 PLK-26Pump Type High pressure vaneMaximum Operating Pressure 170 BarLitres at Working RPM 112 litres/minTank Capacity (litres) 112.5 180 180 180 180 Filter 6µ, replaceable elementValve - Shut-off Tank to Pump StandardValve - Packing Controls Spool typeValve - Ejector Controls and Tailgate Raise Spool type

Cylinder Specifications PLK-16 PLK-19 PLK-21 PLK-23 PLK-26Ejector - Double Acting TelescopicNumber of Stages 4 4 5 5 6Largest Stage Diameter (mm) 152 152 179 179 203 Stroke (mm) 2781 3159 3696 3861 4747 Tailgate RaiseBore x Stroke 85 x 876 mmPacking Blade - Double ActingBore x Stroke 102 x 606 mmShield - Double ActingBore x Stroke 127 x 943 mmTailgate Shur-Lock - Double ActingBore x Stroke 63.5 x 76 mm

Plate SpecificationsBody Sides - Thickness 3 mm BS EN 10025 S275Body Floor - Thickness 4.7 mm BS EN 10025 S550Roof - Thickness 3 mm BS EN 10025 S275Hopper Floor - Thickness 8 mm FORA 400Tailgate Side Walls - Compaction Area 5 mm XAR 400 Brinell Anti-wearTailgate Side Walls - Other 5 mm BS EN 10025 S275Ejector - Material Thickness 3 mm BS EN 10025 S275

FINISHING� Fully chemically pre treated units prior to the application of a 2k

epoxy primer surfacer coating� Finished in a customer specific colour range of either 2k High

Solid Polyurethane topcoat or Waterborne based metallic’s &clear coats

� Ultra modern in house colour database & full technical paintmanufacturers support

� Vast range of customer livery & printed graphic detailing available

BIN LIFTER � Optional UTL bin lifter, not fitted as standard, for 120 – 1,100 litre

comb bin lift� The UTL also has an option for clamping arms to lift 950 litres

cylindrical paladin containers� The Powerlink can also be fitted with a hoist from a third party

supplier

WASTE UNLOADINGUnloading of waste is achieved by a conventional ejection plateensuring complete discharge of waste materials collected.

W_A1

ALFAF

FB1

FBL1

FB2

W_A2 FB3

V12V

FB3B

FBKE

FBAH

FBA1

FBKVE

FBKE FBKE

FBKVE

FBKE

FBA2

GAMMAB

FBKE

FBKVE

FBKE

FB3A

FBKVE

FBKE FBKE

V22V

FBKE

FBKVE

FBKE FBKE

FBKVE

FBKE

FBHE

FBF

FBAO

W_G2 FB4 W_B2 W_B1

H12V

FBKE FBKE

FBKVE

FB7

Quali

ty - R

eliab

ility -

Durab

ility -

Afte

r Sale

s Care

QUALITY ENGINEERED


Tel: +44 (0) 1383 823625Fax: +44 (0) 1383 824062


Technical Specification

Key Benefits - Farid European Group

Documents

Transcript of Key Benefits - Farid European Group