Kammer Control Valves - polna-eng.pl · Stroke (mm) 10 10 20 20 20 40 40 Table 2: K vs / C v-values...
Transcript of Kammer Control Valves - polna-eng.pl · Stroke (mm) 10 10 20 20 20 40 40 Table 2: K vs / C v-values...
Flow Control Division
Kammer Control Valves
2
Series 132000Introduction
Figure 1: 132000 Body Assembly
The new series 132000 control valve completes the range oflined valves within the FLOWSERVE corporation. Many yearsof experience in the manufacture of lined ball and plug valvesand the sophisticated experience of manufacturing excellentreproducible trims for linear valves are combined in this newproduct.
High quality lining materials such as PFA (standard), PVDF,PP, ETFE and FEP as well as PFA antistatic cover mostmediums and applications. The revolutionary PTFE bellowsdesign allows a standard pressure rating of PN 16. Theincreased flow capacity means that the most economicalvalve can be chosen for the application.
T-groove liner connection
Optional test portNPT 1/4“
Guided stem
Metal to metal body/bonnetconnection for definedcompression of the gasket
Liner thicknessminimum 5mm(3,5 mm for DN15 / 1/2“and DN 20 / 3/4“)
Threaded plug andseat interchangeable withother plug and seat sizes
DIN and ANSIbodies and connections
PN 16 modified PTFE bellowsseal,as standard configuration
Optional Hastelloy C276plug and seat inserts for
small Kvs / Cvs-values
Anti-blowout stem design
Flow Control Division
Kammer Control Valves
3
Series 132000Advantages and Features
Features Advantages
Trim DesignThreaded plug and seat design for easy replacement and maintenance. Excellent reproduceable trims and Cv-values based on longterm experience even for small and very small Cv-values
Figure 3: Hastelloy plug and seat insertsFigure 2: Plug and seat PTFE
Liner materials High Quality liner materials PFA (standard), FEP, PVDF, PP, ETFE for mostcorrosive applications.
Liner thickness A minimum liner material thickness of 3,5 - 5 mm provides highest protectionfrom the medium.
Liner connection T-grooves ensure a positive mechanical connection between the liner materialand the valve body.
Bellows seal Standard PN 16 bellows seal manufactured from modified PTFE permituniversal valve applications.
Hastelloy plug and seat inserts Hastelloy C276 plug and seat inserts for small Kvs/Cv values. ReproducableKvs/Cv values and characteristics as well as large rangeability.
Face-to-Face DIN bodies PN 16, integral flanges, DIN face-to-face dimensionsDIN bodies with integral flanges drilled in accordance with ANSI Class 150.ANSI bodies with ANSI face-to-face dimentions and ANSI Class 150 flanges.
Safety Anti-blowout stem design for all sizes, optional test connection for bellows sealleak detection and safety packing ensure maximum safety
Flow Control Division
Kammer Control Valves
4
Series 132000Lining Materials
Figure 5: Vacuum Temperature DiagramFigure 4: Pressure Temperature Diagram
Bellows Seal Design
Figure 6: Bellows Seal
Table 1: Bellows Seal Details
The liner material, the seat and the bellows seal are the only partswhich are in contact with the medium. High quality lining materialssuch as PFA, (Perfluoroalkoxy resin) protect the metal parts of thevalve assembly. T-grooves provide an extremly positive connec-tion between the liner and the valve metal body, especiallyimportant in vacuum applications. Liner thickness is at least 5mm(3,5 mm liner thickness for DN 15 / 1/2” and DN 20 / 3/4”).
Standard PN 16 bellows seal manufactured from modifiedPTFE (TFM) for all applications.Extensive bellows life-cycle testing is based on extrem envi-ronmental conditions. All tests are performed at a tempera-ture of 120 °C and 16 bar pressure.
Size Effective Stroke Open/Closearea Bellows thrust(cm2) (mm) daN
DN 15 6,4 10 110DN 20 6,4 10 110DN 25 8,6 20 52DN 40 8,6 20 45DN 50 8,6 20 45DN 80 13,2 40 75
DN 100 13,2 40 75
-20 0 50 100 150 200
5
10
16
20
T/°C
p/bar
PP FEP
PFA
p/mbar
12345
10204060
100200300400500900
1015 80 100 120 130 140 150 160 170 180 190 200 T/°C
Liner materials are available in most common combinations.PFA, FEP, PP, PVDF ETFE or antistatic PFA cover mostapplication requirements.
FEPPFA
Flow Control Division
Kammer Control Valves
5
0,01 0,012 3 50 : 1 Hast C276* Hast C276*0,016 0,019 3 50 : 1 Hast C276* Hast C276*0,025 0,029 3 50 : 1 Hast C276* Hast C276*0,04 0,047 3 50 : 1 Hast C276* Hast C276*
0,063 0,074 3 50 : 1 Hast C276* Hast C276*0,01 0,012 4,5 50 : 1 Hast C276* PTFE**
0,016 0,019 4,5 50 : 1 Hast C276* PTFE**0,025 0,029 4,5 50 : 1 Hast C276* PTFE**0,04 0,047 4,5 50 : 1 Hast C276* PTFE**
0,063 0,074 4,5 50 : 1 Hast C276* PTFE**0,1 0,12 4,5 50 : 1 Hast C276* PTFE**
0,16 0,19 4,5 50 : 1 Hast C276* PTFE**0,25 0,29 4,5 50 : 1 Hast C276* PTFE**0,4 0,47 4,5 50 : 1 Hast C276* PTFE**
0,63 0,74 4,5 50 : 1 Hast C276* PTFE**1,0 1,2 7 50 : 1 PTFE** PTFE**1,6 1,9 7 50 : 1 PTFE** PTFE**2,5 2,9 10 50 : 1 PTFE PTFE4,0 4,7 12 50 : 1 PTFE PTFE5,0 5,8 15 50 : 1 PTFE PTFE6,3 7,4 16 50 : 1 PTFE PTFE10 12 20 50 : 1 PTFE PTFE13 15 25 50 : 1 PTFE PTFE16 19 25 50 : 1 PTFE PTFE25 29 32 50 : 1 PTFE PTFE32 37 40 50 : 1 PTFE PTFE40 47 40 50 : 1 PTFE PTFE47 55 50 50 : 1 PTFE PTFE63 74 50 50 : 1 PTFE PTFE
100 120 63 50 : 1 PTFE PTFE120 140 80 50 : 1 PTFE PTFE180 210 100 50 : 1 PTFE PTFE
Series 132000Kvs / Cv Table
Seat
dia
met
er(m
m)
Rang
eabi
lity
Seat
mat
eria
l(s
tand
ard)
Plug
mat
eria
l(s
tand
ard)
C v-v
alue
Body size DIN 15 20 25 40 50 80 100Body size ANSI 0,5 0,75 1 1,5 2 3 4Stroke (mm) 10 10 20 20 20 40 40
Table 2: Kvs / Cv-values
k vs-v
alue
* Hastelloy C276 inserts** Optional Hastelloy C276 inserts
The optimised body design of the lined valve series 132000 allows Flowserve to offer one of the widest ranges of Kvs / Cv-valuesfor each individual valve size. This means that smaller valve sizes can be offered with larger Kvs / Cv-values ensuring economicaldimensioning.With more than 35 years experience in the manufacture of smallest Kvs / Cv-values Flowserve has gained a reputation as the„Small Flow Specialist“ with the ability to manufacture „reproducible“ trims.
Flow Control Division
Kammer Control Valves
6
Table 3: Body and Lining materials
Table 4: Trim
Table 5: Bellows seal
Series 132000Standard Materials of Construction
Body type Bonnet Actuator
Series132 Globe valve 132000
3 Bellows seal
1 3 2 3 P 3
P2, P3 Pneumatic P4, P5
E3, E4, E5 Electric motor
Valve Code
Body/Bonnet material 0.7043 (GGG 40.3)
Body pressure class PN 16ANSI Class 150
End connections Integral flanges:DIN PN 16ANSI Class 150
Lining material PFA, FEP, PVDFPFA antistaticETFE
Liner thickness 3,5 - 6 mm
Kvs-values See table 2
Rangeability 50 : 1
Material Modified PTFEfor small Kvs / Cv:Hastelloy C276 plug and / orseat inserts
Leakage class ≤ 0,01 of rated Kvs/Cv-value,class IV acc. to DIN IEC 534
Characteristics Equal percentageLinearOn - Off
Material Modified PTFETF 1620 for DN 15, 20, 25TFM 1600 for DN 40, 50, 80, 100
Pressure 16 bar at 120 °C
Table 6: Options
Bellows seal Hastelloy C276
Stem Hastelloy C276
Flow Control Division
Kammer Control Valves
7
Series 132000Dimensions and Shipping Weights
Table 8: Weights (kg)
Dimensions A A A FDIN PN 16 Class 150 Class 150
Size DIN ANSI
DN 15 / 1/2“ 130 130 130 185
DN 20 / 3/4“ 130 130 130 185
DN 25 / 1“ 160 160 184 240
DN 40 / 11/2“ 200 200 222 245
DN 50 / 2“ 230 230 254 250
DN 80 / 3“ 310 310 298 400
DN 100 / 4“ 350 350 350 450
Table 7: Dimensions (mm)
TypeSize DIN ANSI
DN 15 / 1/2“ 6 6
DN 20 / 3/4“ 6 6
DN 25 / 1“ 11 12
DN 40 / 11/2“ 17 19
DN 50 / 2“ 19 21
DN 80 / 3“ 39 37
DN 100 / 4“ 44 44
F
A
Flow Control Division
Kammer Control Valves
8
All data subject to change without notice©09.2002 Flowserve Corporation. Flowserve and Kämmer are trademarks of Flowserve Corporation
ADK3
2210
0E -
07.0
2
Regional Headquarters
Flowserve Flowserve FlowserveManderscheidstr. 19 1350 N. Mt. Springs Prkwy. 12 Tuas Avenue 2045141 Essen Springville, UT 84663Germany USA Republic of Singapore 638824Telephone: +49 (0) 201 8919 5 Telephone: +1 801 489 8611 Telephone: +65 862 3332Facsimile: +49 (0) 201 8919 662 Facsimile: +1 801 489 3719 Facsimile: +65 862 4940
Main Sales Offices (Europe, Middle East, Africa)
Flowserve Flowserve Flowserve Flowservevon-Braun-Straße 19a 12, av. du Québec Station Road Allee du Quartz 148681 Ahaus 91965, Courtaboeuf Cedex Pershore, Worcestershire CH-2300 La-Chaux-de FondsGermany France England WR102BZ SwitzerlandTelephone: +49 (0) 2561 6860 Telephone: +33 (0) 1 60 923 251 Telephone: +44 (0) 1386 55 45 51 Telephone: +41 (0) 32 925 9700Facsimile: +49 (0) 2561 68648 Facsimile: +33 (0) 1 60 923 299 Facsimile: +44 (0) 1386 55 49 68 Facsimile: +41 (0) 32 926 5422
Flowserve Flowserve Flowserve FlowserveUnits 1 and 2 C/O Saleh & Abdulaziz Abahsain Kasernengasse 6 Burrell Road26, Imvuba Road, Sebenza Ext 6 P.O. Box 209Edenvale, Gauteng Hayward HeathEdenglen 1613 Al Khobar 31952 9500 Villach Wesr SussexSouth Africa Saudi Arabia Austria EnglandTelephone: +27 11 609 2094 Telephone: 9663 857 3442 Telephone: +43 (0) 424241 181-0 Telephone: +44 (0) 1444 314400Facsimile: +27 11 609 3735 Facsimile: 9663 859 5284 Facsimile: +43 (0) 424241 181 50/51 Facsimile: +44 (0) 144 3144401