K79200155-00 One-Brochure 12S 4 printdentsplymea.com/sites/default/files/Brochure_0.pdf ·...
Transcript of K79200155-00 One-Brochure 12S 4 printdentsplymea.com/sites/default/files/Brochure_0.pdf ·...
Simple. Aesthetic.Easy to use restorative system solution for natural aesthetics:
Robust adhesive for high application security
Nano-ceramic composite with simplifi ed shading system
K79200155-00_One-Brochure_12S_4_print.indd 1 21.08.14 15:21
The Collection
It is diffi cult to routinely achieve an optimum level of dentin moisture prior to the application of an adhesive. Over-wet or over-dry dentin can lead to insuffi cient sealing, resulting in micro leakage and post-operative sensitivity. prime&bond® one ETCH & RINSE is a technique tolerant solution, providing high bond strength and reliable performance even on over-wet and over-dry dentin.
The technique tolerant etch&rinse adhesive for all restorations
Literature often recommends the use of a self-etch adhesive in cavities with a large proportion of exposed dentin in order to minimise the risk of post-operative sensitivity. However, etch&rinse adhesives often show superior long term results on enamel. prime&bond®one SELECT combines advantages from both techniques.It provides high bond strength in all etching techniques (self-etch, etch&rinse and selective enamel etching) and delivers reliable performance even on over-dried dentin, resulting in virtually no post-operative sensitivities1.
The versatile adhesive proven for all etching techniques
1 Data on fi le.
K79200155-00_One-Brochure_12S_4_print.indd 2 21.08.14 15:21
The Collection
Extremely simple and easy to use, ceram.x® one UNIVERSAL covers the full VITA1 range with just 7 shades. With intermediate translucency between natural enamel and dentin, ceram.x® one UNIVERSAL has a powerful chameleon eff ect resulting in natural lifelike restorations ideal for everyday use. The simplifi ed shading system of ceram.x® one UNIVERSAL saves you time, inventory and guess work.
Many composite systems provide a myriad of shades and translucencies, making it diffi cult to match the colour of the natural tooth. ceram.x® one DENTIN & ENAMEL replicates the structure of natural teeth by utilising only 2 translucencies: dentin shades that mimic the translucency of natural dentin and enamel shades which mimic natural enamel. With only 4 dentin and 3 enamel shades, ceram.x® one DENTIN & ENAMEL covers the full VITA range enabling highly aesthetic, natural restorations.
replicates the structure of natural teeth by utilising only 2 translucencies: dentin shades that mimic the translucency of natural dentin and enamel shades which mimic natural enamel. With only 4 dentin and 3 enamel shades, ceram.x
dentin, ceram.xchameleon eff ect resulting in natural lifelike restorations ideal for everyday use. The simplifi ed shading system of ceram.xsaves you time, inventory and guess work.
The single translucency system for lifelike everyday restorations
The dual translucency system for highly aesthetic, natural restorations
1 VITA® is a registered trademark of Vita Zahnfabrik H. Rauter GmbH & Co
K79200155-00_One-Brochure_12S_4_print.indd 3 21.08.14 15:21
• Excellent bond strength, even on over-wet and over-dry dentin
• Dark cure option available for indirect restorations
• Convenient
Most adhesives require an optimum level of dentin moisture to reach their full potential. This can be diffi cult to achieve under practice conditions.
Failure to achieve optimal moisture usually results in post-operative sensitivity and decreased bond strength.
prime&bond® one ETCH & RINSE is diff erent to most adhesives and demonstrates reliable performance under various degrees of dentin moisture.
10 SEC OVER DRIED 10 SEC OVER DRIEDIDEAL MOISTURE
Gaps
prime&bond® one ETCH & RINSE prime&bond® one ETCH & RINSE Optibond Solo Plus1
Collagen and tubules are infi ltrated by adhesive. Adhesive infi ltrates tubules and even collapsed collagen fi bers.
Marginal gaps can lead to micro leakage and post-operative sensitivity.
prime&bond® one ETCH & RINSE shows reliable performance even under various levels of dentin moisture, providing a high degree of technique tolerance.
Excellent bond strength on over-wet and over-dry dentin2
1 Not a registered trademark of DENTSPLY International, Inc.2 Latta MA, 2009, after 1800 thermo cycles (5/55 °C), n=10; 5 mm/min.
Shear bond strength [MPa]50
40
30
20
10
0
OptimumOver-dried (10 sec)
Over-wet
Excite1 Optibond Solo Plus1
Single Bond 21
Tetric N-Bond1
prime&bond® one ETCH & RINSE
K79200155-00_One-Brochure_12S_4_print.indd 4 21.08.14 15:21
Dark-cure option for indirect restorations
In cases where there is little confi dence that the curing light has fully penetrated all required areas of the indirect restoration, prime&bond® one ETCH & RINSE can be used in combination with Self Cure Activator and Calibra® to provide additional security, ensuring that curing is complete.
prime&bond® one ETCH & RINSE showed a very high fatigue limit that surpassed most other competitive adhesives including a filled multi bottle system.
Micro-shear fatigue limit2Excellent dentin sealing1
Restorations completed with prime&bond® one ETCH & RINSE demonstrated sealing in 100% of dental tubules.
[%]100
80
60
40
20
0Syntac3
+ Tetric EvoCeram3Single Bond 23
+ Z2503 p&b® one E&R+ ceram.x® one
1 Rosales-Leal JI, 2013. Data on fi le.2 Braem M, 2006. Data on fi le.3 Not a registered trademark of DENTSPLY International, Inc.4 10-28°C for 2 years.
µSFR (Micro Shear Fatigue Resistance) 10.000 at 2 Hz (35 °C) steps: ± 8% (immediate testing)
40
30
20
10
0Scotchbond
1 XT3 OptiBond
FL3OptiBond Solo Plus3
prime&bond® one ETCH & RINSE
The high-end Etch&Rinse Adhesive for all indications
prime&bond® one ETCH & RINSE contains t-butanol, a unique solvent which contributes to:
• Chair side storage (no refrigeration)4
• 15 minutes storage in CliXdish™
Convenient Precise application for less waste
K79200155-00_One-Brochure_12S_4_print.indd 5 21.08.14 15:21
• High Application Security
• Virtually no post operative sensitivity
• High and well balanced bond strength
• Convenient
SELECT your preferred etching technique
Phosphoric etching of dentin is believed to increase the risk of post-operative sensitivity. For cavities with a high proportion of exposed dentin, self-etch may be the bonding technique of choice.
The selective etching of enamel enhances the marginal quality and minimises the exposure of dentin to the etchant.
Etch & Rinse is ideal for clinical situations where there is a large amount of enamel.
Self-Etch Selective-Etch Etch & Rinse
Virtually no post-operative sensitivity
User survey3 with 6,288 restorations using prime&bond® one SELECT: 99.6% of the restorations did not show post-operative sensitivity
no post-operative sensitivity
post-operative sensitivity6,264
24
1 Perdigão J, 2013/2006. Data on fi le.2 Not a registered trademark of DENTSPLY International, Inc.3 Data on fi le.
High application security1
prime&bond® one SELECT delivers reliable performance even on 10 second over-dried dentin.
Gaps
prime&bond® one SELECT Self-Etch Etch&Rinse Etch&Rinseprime&bond® one SELECT Optibond Solo Plus2
Marginal gaps can lead to micro leakage and post-operative sensitivity.
Even on severely over-dried dentin, prime&bond® one SELECT shows a uniform hybrid layer and infi ltrates the dentin tubules forming resin tags.
10 SEC OVER DRIED 10 SEC OVER DRIED10 SEC OVER DRIED
K79200155-00_One-Brochure_12S_4_print.indd 6 21.08.14 15:21
0 250 500 750
Single Bond Universal3
Single Bond Universal3
prime&bond® one SELECT
SELF
-ETC
HET
CH&
RIN
SE
DENTIN
prime&bond® one SELECT
dye penetration [µm]
0 250 500 750
ENAMEL
dye penetration [µm]
Marginal sealing is paramount for the quality and longevity of a restoration.
High and well balanced bond strength1
prime&bond® one SELECT delivers high and well balanced bond strength in both self-etch and etch&rinse technique.
Dentin
Enamel
50
40
30
20
10
0
Etch&Rinse: Shear bond strength [MPa]
Single Bond Universal3
prime&bond® one SELECT
Shear bond strength after 6,000 thermo cycles1
Self-etch: Shear bond strength [MPa]50
40
30
20
10
0iBond SE3
Adper Prompt L-Pop3
AdheSE One F3
Clearfi l S33
Single Bond Universal3
prime&bond® one SELECT
Gbond3
prime&bond® one SELECT contains t-butanol, a unique solvent which contributes to:
• Chair side storage (no refrigeration)• 30 minutes storage in CliXdish™
Class V restorations completed with prime&bond® one SELECT demonstrated better sealing of dentin margins in both etching modes compared to control adhesives.
Convenient
Dye penetration2
1 Latta MA, 2013. Data on fi le.2 Rosales JI, 2005. Data on fi le.3 Not a registered trademark of DENTSPLY International, Inc.
Precise application for less waste
The versatile adhesive for all etching methods
K79200155-00_One-Brochure_12S_4_print.indd 7 21.08.14 15:21
Nano-ceramic Eff ect: Low monomer leakage of ceram.x® one
Conventional Hybride Composite1
ceram.x® one Technology
ConventionalFillers
ConventionalMonomer
Formulations
Organically Modifi edCeramic Particles
Diff usion possible Diff usion possible
The reduced content of conventional resin results in a minimised release of monomers compared to other composites.
Nano-ceramic technology of ceram.x® one
Adding organically modifi ed ceramic nano-particles allows a reduction of conventional resin to about 50%.
x100
Glass-fi ller[1.1-1.5 µm]
Nano-fi ller[10 nm]
Nano-particles[2-3 nm]
Fluorescence
Fluorescence is the main feature of natural tooth structure. ceram.x® one contains fl uorescent pigments which are visible under black-light conditions to give an appearance similar to natural teeth.
ceram.x®
one
Filtek2
1 2
3 4
1. ceram.x® one UNIVERSAL a2
2. ceram.x® one DENTIN & ENAMEL e2
3. Filtek Z2502
4. Filtek Z5002
Long working time3
ENA
MEL
DEN
TIN
UN
IVER
SAL
ceram.x® one
Time [s]
0
180
60
1202 minutes
(ambient light of 10,000 Lux)
1 Composite A with 23 % conventional monomers (data on fi le). ceram.x® one contains 12.5 % conventional monomers only. 2 Not a registered trademark of DENTSPLY International, Inc.3 Data on fi le.
• Simple.• Natural.• Aesthetic.
Nano - Ceramic Restorative
K79200155-00_One-Brochure_12S_4_print.indd 8 21.08.14 15:21
Before After
Extremely simple and easy to use, ceram.x® one universal comprises of just 7 versatile shades with an intermediate translucency between natural dentin and enamel. The 16 VITA1 shades have been regrouped based on close similarities in lightness and chroma resulting in the creation of 7 shades that result in natural lifelike restorations ideal for everyday use.
ceram.x® one UNIVERSAL is recommended for everyday restorations
The single translucency system for lifelike everyday restorations
• 7 shades cover the full VITA1 range
• Simple and effi cient shade selection
• Natural, lifelike everyday restorations
ceram.x® one UNIVERSAL clinical case: Lifelike posterior restoration
Treatment provider: Prof. Dr. Manhart, University of Munich, Germany.
Nano - Ceramic Restorative
1 VITA® is a registered trademark of Vita Zahnfabrik H. Rauter GmbH & Co
a1 a2 a3 a3.5c1 c2 a4
A1 B1 C1 D2
A2 B2 C2 C3 D4 A3.5
A3 D3 A4 C4
B3 B4
Ideal capping
material afte
r SDR®
bulk placement!
K79200155-00_One-Brochure_12S_4_print.indd 9 21.08.14 15:21
ceram.x® one DENTIN & ENAMEL closely replicates the translucency and chroma of the natural tooth, reproducing the characteristics of younger, adult and older teeth. The system combines just four dentin shades with a high opacity and chroma with three enamel shades that mimic the translucency of natural enamel enabling highly aesthetic, natural restorations.
ceram.x® one DENTIN & ENAMEL is recommended for all types of anterior restorations where aesthetic results are of major importance
The dual translucency system for highly aesthetic natural restorationsShade match at the cervical area
Shade match at the incisal area
• 7 shades cover the full VITA1 range
• Simple and effi cient shade seletion
• Dentin and enamel shades replicates the structure of natural teeth
• “Perfect” long term aesthetics2
4 dentin shades
3 enamel shades
d4d2 d3d1
e3e2e1
younger older
ceram.x® one DENTIN & ENAMEL clinical case: “Perfect”2 long-term aesthetics
Initial situation Directly after restoration After 9 years – no marginal discoloration
“Even after 9 years the present ceram.x® one DENTIN & ENAMEL restoration appears in perfect clinical condition.“
1 VITA® is a registered trademark of Vita Zahnfabrik H. Rauter GmbH & Co2 Klaiber B, University of Wurzburg Germany
Prof. Dr. Klaiber, University of Würzburg, Germany
Nano - Ceramic Restorative
K79200155-00_One-Brochure_12S_4_print.indd 10 21.08.14 15:21
Treatment provider: Prof. A. Putignano, University of Ancona, Italy Treatment provider: PD Dr. D. Dietschi, University of Geneva, Switzerland
BEFORE BEFORE
AFTER AFTER
Visible when smiling: noAesthetic expectations: mediumCavity size: largeMaterial used: ceram.x® one UNIVERSAL
Visible when smiling: completelyAesthetic expectations: highCavity size: mediumMaterial used: ceram.x® one DENTIN & ENAMEL
... placed by professionals
Treatment provider: Juri Beljakov, University of Tartu, Department of Stoma-tology, Estonia (Winner of the Global ceram.x® Case Contest 2011/12)
Treatment provider: Mehreen Safdar, University of Copenhagen, Denmark (ceram.x® Case Contest 2009/10)
BEFORE BEFORE
AFTER AFTER
Visible when smiling: completelyAesthetic expectations: highCavity size: largeMaterial used: ceram.x® one DENTIN & ENAMEL
Visible when smiling: completelyAesthetic expectations: highCavity size: largeMaterial used: ceram.x® one DENTIN & ENAMEL
... placed by students
Treatment provider: Bernd van der Heyd, Department of Preventive Dentistry, Periodontology and Cariology University of Göttingen, Germany (Winner of the Global ceram.x® Case Contest 2012/13)
Treatment provider: Luca Polonara, Università Politecnica delle Marche, Ancona, Italy (ceram.x® Case Contest 2005/06)
BEFORE BEFORE
AFTER AFTER
Visible when smiling: completelyAesthetic expectations: highCavity size: mediumMaterial used: ceram.x® one DENTIN & ENAMEL
Visible when smiling: noAesthetic expectations: mediumCavity size: mediumMaterial used: ceram.x® one DENTIN & ENAMEL
After 9 years – no marginal discoloration
Simple, Natural and Aesthetic clinical cases placed with ceram.x® one
K79200155-00_One-Brochure_12S_4_print.indd 11 21.08.14 15:21
DENTSPLY LimitedBuilding 3The Heights, BrooklandsWEYBRIDGESurrey KT13 ONYUNITED KINGDOMPhone +44 (0) 19 32 85 34 22
DENTSPLY International Inc.29/F Excel CentreNo. 483A Castle Peak RoadCheung Sha Wan, KowloonHong KongPR ChinaPhone +852 (0) 28 70 03 36
ceram.x® one DENTIN & ENAMELStarter Kit
ReOrder 607.01.390 4 x ceram.x® one Dentin Shades (3 g each) 3 x ceram.x® one Enamel Shades (3 g each) 1 x prime&bond® one ETCH & RINSE (3.5 ml) 1 x DT® Conditioner 36 (3 ml) 25 x Applicator Needles 50 x Applicator Tips 1 x CliXdish™ 1 x Dentin & Enamel Shade Guide 1 x Illustrated Technique Guide 1 x iShade Label 1 x Instructions for Use
ceram.x® one UNIVERSALStarter Kit
ReOrder 607.01.590 7 x ceram.x® one UNIVERSAL Shades (3 g each) 1 x prime&bond® one ETCH & RINSE (3.5 ml) 1 x DT® Conditioner 36 (3 ml) 25 x Applicator Needles 50 x Applicator Tips 1 x CliXdish™ 1 x Dentin & Enamel Shade Guide 1 x Illustrated Technique Guide 1 x iShade Label 1 x Instructions for Use
prime&bond® one ETCH & RINSE
ReOrder 606.67.4271 x 3.5 ml prime&bond® one ETCH & RINSE1 x 50 Applicator Tips1 x CliXdish™1 x Instructions for Use
ceram.x® one UNIVERSALRefi ll
a1 607.01.531a2 607.01.532c1 607.01.533c2 607.01.534 a3 607.01.535a3.5 607.01.536a4 607.01.537
ceram.x® one DENTINRefi ll
d1 607.01.591d2 607.01.592d3 607.01.593d4 607.01.594
ceram.x® one ENAMELRefi ll
e1 607.01.596e2 607.01.597e3 607.01.598
prime&bond® one SELECT
ReOrder 606.67.4261 x 3.5 ml prime&bond® one SELECT1 x 50 Applicator Tips1 x CliXdish™1 x Instructions for Use
K792
0015
5-00
©
DEN
TSPL
Y D
T
07
/201
4
The Collection
K79200155-00_One-Brochure_12S_4_print.indd 12 21.08.14 15:21