JuNeng Company Profile

R&D Office: 15 Ibeziaku Street, Off Behind Ziks Flats, Onuiyi, Nsukka, Enugu State, Nigeria, P.O. BOX 698 Nsukka, Enugu State, Nigeria; Lagos Office: 94 Alabi Oyo Street, Bucknor, Ejigbo, Lagos State; Abuja Office: Suite 144, BEF’s Plaza, Ground Floor, Utako District, Abuja; Tel: +234 (0) 803 480 6486, +234 (0) 8139454807, +234 (0) 7031327759; Website: www.junengnigltd.ng.cm; Email: [email protected]

JJUUNNEENNGG NNIIGGEERRIIAA LLIIMMIITTEEDD

CORPORATE PROFILE 2012

INTRODUCTION AS AN INTEGRATED GENERAL CONTRACTING, FIBREGLASS MANUFACTURING AND

RESEARCH & DEVELOPMENT COMPANY


Company Profile

Introduction

JuNeng Nigeria Limited (RC: 925745) is incorporated under the laws of the Federal Republic of Nigeria Companies

and Allied Matters Act with an initial share capital of One Million Naira to carry out the business of general contracts,

procurement and supplies of general goods and services, manufacturers agents, distributors & sales representatives.

JuNeng Nig ltd was established after recognizing the need for a smaller sized company able to utilize a good working

knowledge of an integrated service oriented industry and to enable the economic manufacture of superior quality

custom products for a broad spectrum of end user applications whilst understanding the need for a reliable service and

the ability to meet delivery schedules whilst being flexible.

Our idea of service translates into three imperatives. First, to make ourselves available: good communication is vital to

the success of any job. Second, to deliver our services on time; meeting your expectations is crucial, particularly

because our work most often ties with our customers. Third, we stay within budget.

The company has three overall strategic directions:

General Contracting

Specialize Manufacturing

Research & Development

General Contracting

JuNeng Nig provides solutions to an integrated general contracting services and products including but not limited to:

Anti–corrosion fibre-glassing & expoxification of industrial floors & essential machinery parts;

Lamination and Leakage seal of industrial pipelines, underground & surface tanks, platforms;

Insulation and lagging of industrial pipelines, air circulation systems & storage vessels;

Restoration, repair & retrofit of corrosion damaged concrete structures, tanks, pipelines, floors, roofs;

Suppliers and applicators specialist corrosion resistant lining, coating and sealing paints;

Fibreglass and polymer resin composite materials suppliers, applicators and consultant;

Suppliers of specialist industrial and analytical laboratory equipment, chemicals & services;

Procurement, supplies & installers of Renewable Energy/Environmental Friendly Technologies;

Procurement, supplies & installers of Office, Communication and Security Equipment & Gargets;

Procurement, supplies & installers of complete range agricultural machineries and equipment;

Procurement & supplies of Personal Protective Equipment (PPE) and Industrial Safety Materials;

Procurement & supplies of industrial machineries, equipments & total turnaround maintenance;

Design, Procurement and Construction of Mechanical, Electrical & Civil Engineering Installations, etc.


Specialize Manufacturing

JuNeng NIG specialize in the manufacture of superior anti-corrosion FRP composite mouldings parts for most

applications, we provide expertise to companies looking to incorporate innovative composite materials into their

product lines. JuNeng NIG can engineer material to meet the needs of specific product applications. These composites

perform well in applications requiring resistance to corrosion in damp soil conditions, acids, oxidising agents, metal

salts, reducing gases, sulphur gases, acid, alkali or salt. Our knowledge of fibre tensile strength, resin characteristics,

and molding technologies allows us to evaluate the requirements of a given application and create a material to meet

those needs. Products have included among many:

Design and Development of FRP storage tanks, water filter tanks, brine filter tanks, brine tanks, food

processing tanks, vessels & containers for industrial applications;

Construction of High performance corrosion protection anti-slip resinous epoxy floors, polyurethane

floors, polyurea floors, acrylic floors, etc, on virtually any surface;

Development of Fire-proof fiberglass panels and structures, Acoustic and high impact resistant

composite panels, FRP roofing panels, FRP security cabin, FRP window sheds, FRP domes, FRP columns,

FRP WC cubicles, FRP louvers and window louvers;

Manufacture of specialist anticorrosion paints, primers and resins.


JuNeng Nig ltd is also a Research & Development (R&D) company with many years of industrial and academic

research on composite materials development. Our center for composite research and development (CCRD) unit was

establish as an interdisciplinary centre for carrying out teaching, research, design and development in the field of local

materials processing and their applications. The main objectives of the centre are as follows:

promote the development of local content materials through research studies on renewable

agricultural fibers and byproducts as ecological reinforcing fillers in plastics for structural and non-

structural applications;

provide expertise to organizations and companies looking to incorporate innovative composite

materials technology into their projects or product lines;

promote the dissemination and transfer of composite materials technology through workshops,

seminars, training, pilot projects, R&Ds, etc.

facilitate a more profitable, dynamic and sustainable rural industry through research studies on

application of local content raw materials in sustainable development of rural societies.

Our center for composite research and development (CCRD) comprises of a team of well qualified researches and

scholars draw from both the industry and academia with good research experience. The research activities carried out

within CCRD involve computational and experimental studies of engineering materials and structures for both

academic and industrial research projects.


Our Core Values and Services and Systems

Unparalleled fiberglass reinforced polymer solutions—from materials to design through completion

Proven experience in all project delivery methods and contract types

Dedicated virtual design and research and development specialists

Cutting-edge communications and project management tools

Trained green building specialists and renewable energy projects help achieve sustainable goals

Strong relationships with subcontractors and technical partners

A commitment to diversity, minority mentoring and collaboration

Established and continuously enhanced field procedures to reflect the highest industry best practices

Highly rated, proactive Safety Program, with a focus on total project safety and work design efficiency

One-of-a-kind Quality Program that raises the industry bar on high performance services and products

Accurate and timely project closeout

Our Planned Future

Planned growth built upon a solid strategic foundation

Continue to foster an ownership culture where each partner is empowered to make a difference

Further enhance our culture built around research and development

Continuing to cultivate diversity in our people, purchases and projects

A true commitment to finding and nurturing a new generation of researchers and developers

Creatively developing new value-added services for our clients and partners

Mission Statement

JuNeng Nigeria Limited has been taking a leading role in providing integrated general contracting services with

uncompromised commitment to Quality, Health, Safety and Environment. We do this through the combination of an

open relationship with our employees and clients based on mutual trust, transparency, accountability and discipline. In

preparation to meet the growing market demands for diverse industry, we have invested so much in R&D. We hope to

be a model of our values and beliefs through our products, services, people and our influence in the society we are in.

Being proud of our achievements, we will continue to further enhance our commitment and capabilities in the general

contracting industry with integrity and strive for business excellence.

Best Regards! Agbiogwu Darlington For, JuNeng Nigeria Limited Call: 08034806486, 08085308968, 08139454807, 08189693174 Email: [email protected] or [email protected]

http://www.mccarthy.com/work/construction/

http://www.mccarthy.com/work/delivery-methods/

http://www.mccarthy.com/about/leading-technology/

http://www.mccarthy.com/work/high-performance-green/

http://www.mccarthy.com/about/diversity-and-inclusion/

http://www.mccarthy.com/about/safety/

http://www.mccarthy.com/work/post-construction/

http://www.mccarthy.com/work/overview/


Organizational Structure &Chart

Managing Director/Chief Executive Officer

Chief Technical Director

Projects & Contracts




Production & Manufacturing

Business Process

Development Manager

Research &

Development Manager

Production &

Manufacturing Manager

Corporate Legal &

Regulatory Adviser

Corporate

Communication Manager

Human Resources

Manager

Customer Care

Executive Manager

Chief Financial &

Account Manager

Procurement

Executive Manager

Design & IT

Development Officer

Estimation & Cost

Control Officer

Plant Control/Technical

Section Officer

Process/Production

Engineers

Research &

Development Scientists

Technical Sales

Representatives

Operation’s Manager

– Electrical


– Civil


– Mechanical

Board of Directors


JJUUNNEENNGG NNIIGG LLTTDD - STRENGTH THROUGH DIVERSITIES -

Capabilities


Capabilities JuNeng™ Seamless Polymer Floors & Wall Systems

JuNeng Epoxy Seamless Flooring for Auditoriums

JuNeng Heavy Duty Industrial Epoxy Flooring for Warehouses, Factories & Production Areas

JuNeng Commercial Seamless Floors for Office

Complexes, Banks, Terminals, Hotels, etc.

JuNeng Bacterial Resistant & Antimicrobial Seamless Flooring for Pharmaceuticals, Hospitals & Laboratories

JuNeng Seamless Flooring for Libraries

JuNeng provide seamless polymer floor and wall finishes designed specifically for laboratories production, clinically controlled clean rooms, and processing areas within the pharmaceutical, hospitals, industrial laboratories, process industries, food & drink production facilities, factories, workshops, car park decking, storage areas, office complex, auditoriums, residential areas and anywhere else where a safe, slip-free, long-wearing corrosion resistant and easy to clean surface systems is needed.

JuNeng™ Polymer Flooring Systems is a 4 layers design specially engineered to be applied on virtually any surface and designed to withstand the heavy duty wear and tear of industrial use, each floor coating we apply is guaranteed to offer superior longevity and promises to give your premises a clean and easily maintainable, tough and professional floor coating.

With JuNeng™ Polymer Flooring Systems you will find these polymer floor coverings to be dense and seamless. We offer a variety of colors, enabling you to match your floor’s new look to the rest of your facility, or custom design the color to match your exact environment. Our floor coatings are also available with different aggregates for non-slip texture..

Polymer Flooring Types Provided:

Epoxy Flooring Quartz Flooring Acrylic Flooring Low Odor Flooring Resinous Flooring Waterproof Flooring Decorative Flooring Decorative Flooring Paint Flake Flooring Heavy Duty Flooring Polyurethane Flooring UV Resistant Flooring Skid Resistant Flooring Low Maintenance Flooring Chemical Resistant Flooring Seamless / Monolithic Flooring Secondary Containment Flooring Static Dissipation / ESD Flooring Pharmaceutical and Laboratory Flooring Bacterial Resistant & Antimicrobial Flooring Thermal Shock & Temperature Resistant Flooring Seamless Hygienic Floors for Restaurants & Hotels Commercial Flooring for office complex & auditoriums

Industrial Flooring for Food & Breakage Manufacturers


Capabilities Anti-corrosion/Chemical-resistant applications

JuNeng NIG offers an outstanding range of corrosion

resistant, chemical grade high performance polymer resins

such as epoxy, acrylic, polyurethane, polyester and vinyl ester

resins. They are suitable for the manufacture of GRP tanks,

pipes and containers for acids, alkalis, fuels, foodstuffs, drinks,

water and other demanding materials containment.

We also provide a diverse range of anti-corrosion

services including but not limited to Anti–corrosion Fibre-

glassing & Epoxification of industrial floors, drainages, pipes

and essential machinery parts; Lamination of oil pipelines,

underground and surface fuel tanks, oil wells and decks;

Repair and Retrofit of corrosion damaged structures and

buildings, Corrosion Protective flooring for laboratories,

chemical plants, food processing plant, aircraft hangars,

engine rooms and hospitals; Internal lining of Oil, Gas, and

highly corrosive chemical storage tanks; Corrosion resistant

and high temperature resistant lining and coating; Pipeline

and storage insulating Coating; FRP - Lining for acid, MTBE,

Methanol and other corrosive chemical resistant for steel and

concrete surface; Anti slip, anti abrasion, anti static chemical

resistant protective coating; Glass Flak, Epoxy Vinyl ester

Lining & coating on concrete & steel surface for high chemical

resistant; etc. Our engineers have the experience to identify the

types of material and select the most suitable repair system to

arrest the corrosion process.

Trenchless Sewer Repairs Using JuNeng Epoxy-

Cement Mortar System

Tankage bottom Repair & Fiber Lining for

Corrosive Chemical Resistant

Fluid applied thermal insulated water proofing

and Corrosion protective system

The result of pipe refurbishment with JuNeng

INLINER® is a long lasting, corrosion and abrasion resistant lining

Market sectors served by chemical resistant composites include water and wastewater

treatment, pulp and paper, food processing, chemical processing, pharmaceuticals, power

generation, renewable energy processes, oil & gas industries. Applications include piping, fittings,

connectors, tanks, scrubbers, weirs, baffles, flumes, domes, grating, ladders, walkways, enclosures,

buildings and panels.


Capabilities JuNeng™ Composite FRP Tanks & Piping Systems

FRP Tanks for Typical Industrial Tank Farm

JuNeng FRP Pressure Tanks

3x30m3 Storage tanks for Water Treatment

Manufactured Using JuNeng™397PA

Corrosion-resistant Composite FRP Pipes

Composite FRP Pipes Manufactured Using

JuNeng™204PA

JuNeng NIG specializes in the design, manufacture, supply

and installation of superior composite FRP tanks, piping and

chemical containing systems for most applications. Today JuNeng

is taking its place in the local Nigerian market as a major supplier

of FRP mouldings for water, chemical and petroleum product

containment and transmission - including septic, recirculation,

dosing, holding and treatment tanks, etc.

Each time a JuNeng fiberglass FRP tank is delivered to a

customer, the same performance standard has been met — a

vessel for safe keep of liquids and careful protection of the

environment.

Typical GRP applications Storage tanks Piping Ducts Scrubbers Containers Chemical plants Sewage and water treatment plants

Typical chemical products handled Composite FRP tanks, containers and pipes are ideally suited for the safe, reliable storage and transfer of:

Corrosive chemicals Fuels Potable water Effluents and contaminated liquids Wine Sewage Agricultural waste Animal feeds Foodstuffs

Benefits of using GRP JuNeng composite FRP components have other added benefits:

Lightweight, strong, tough composite structure Require little maintenance Easy to clean using a high-pressure hose Repair work can be carried out in-situ, fast and cost

effectively On-site system modifications are often feasible.


Capabilities JuNeng™ Composite FRPs for Oil & Gas Facilities

FRP Tanks for Typical Industrial Tank Farm

Composite FRP Floating Oil & Gas Drilling Deck

FRP Staircase & Platform solution

Composite FRP Underground Storage Tank

Manufactured Using JuNeng™204PA

104m3 Double Wall Fibreglass Underground Storage Tank Made Using JuNeng™10297PA

Within the oil and gas industry; corrosion resistance, safety

and maintenance requirements are critical considerations. For

nearly four decades, FRP composites have met the challenge of the

harsh environmental conditions found in the oil and gas industry

with its wide selection of outstanding features. Key advantageous

features such as corrosion resistance, slip resistance, flame

retardancy, nonconductivity, impact absorption and low

maintenance make these products ideal for use in all types of oil

and gas facilities.

JuNeng's FRP products offer superior resistance to corrosive

saltwater, drilling fluids, acids, alkalis and other chemical

compounds. The result is minimal maintenance requirements, a

long service life and a lower life cycle cost than ferrous metals and

aluminum. Today, end applications can be found on offshore

platforms, floating facilities, processing skid packages, land-based

and offshore drilling rigs, marine terminals, storage facilities, gas

processing plants, subsea manifolds and refineries.

Applications

• Boat Landings, Splash Zone Areas, Wind walls • Stairways, Decking, Bridges, Catwalks, Ship's Ladders • Walkways over Mud Pits/Mud Tanks • Access Platforms for Metering Stations, Valve Operations & Other Areas • Communication Platforms/Chemical Injection Skids (Access Platforms) • Coverings, Support, Protection for Subsea Components • Drilling Derrick (Crown, Belly Boards, RackingBoards) • Air Intake and Personnel Protection Screens Features and Benefits of JuNeng FRP Products for Oil & Gas Environments . Corrosion Resistance . Slip Resistance . Low Maintenance . Fire Retardant . High Strength-to-Weight Ratio . Electrically and Thermally . Impact Resistance . Easily Fabricated - . Electronically Transparent


Capabilities JuNeng™ Fiberglass Reinforced Plastic (FRP) products

JuNeng™ Composite FRP Doors

JuNeng™ FRP Cubicle Designs

Composite FRP Roofing Sheets

Composite FRP Roofing Sheets

JuNeng™ FRP Metal Detector Canopy

Composite FRP Security Cabin

JuNeng NIgLtd is engaged in the manufacturing of a wide range FRP products or fiberglass reinforced plastic products that are known for their excellent quality, high durability, corrosion resistance and optimum utility. Fabricated from quality raw material such as FRP, Resin and others, our range of fiberglass reinforced plastic products are widely used in various construction industries across the nation. We also offer customized requirement as per client’s specifications. Our range includes fiberglass reinforced plastic products, FRP roofing, FRP security cabin, FRP window sheds, FRP domes, FRP columns, FRP WC cubicles, FRP louvers and window louvers.

JuNeng™ FRP Doors

We offer quality range of Composite FRP Doors that are made using superior composite materials, which ensures their durability and trouble free performance. These doors are suitable for domestic purposes and exhibit the versatility of polyester matrix with the strength of glass fiber. We provide our range of FRP Composite Doors in different exquisite designs, colors, & sizes and are extremely durable and maintenance free. We also provide our clients with customize designs as per their tastes and specifications.

JuNeng™ FRP Roofing Sheets We offer FRP roofing for various industries, including residential, commercial &industrial roofing. Our range of FRP roofing is available at market leading prices and we also offer customization as per client’s specifications.

JuNeng™ FRP Security Cabin & WC Cubicles We provide FRP security cabins and WC cubicles that are made of superior quality raw

material and cater to various industries across the nation. These FRP security cabins and

WC cubicles are known for their excellent resistance to moisture/water, ultraviolet rays, electrical shock, temperature/heat, water hammering and all chemical effects like oils, acid

and various types of fumes etc. Our range of FRP security cabins and WC cubicles can be

designed and manufactured to suit elevation of the building.

JuNeng™ FRP Columns & Capitals Our range of FRP column capitals gives a classical look to the interior of abode styles enabling us to provide exactly what each customer desires. We supply our FRP column capitals with the most careful attention to details combined within surpassed service in a cost effective, timely manner.

JuNeng™ FRP Canopies & Domes The ultimate in metal detector canopies and specialty domes, FRP metal detector canopy and specialty domes provide elegance, to enhance any style and decoration. We can design and install a huge range of FRP metal detector canopy and specialty domes as internal and external shades for equipment suitable for almost all applications

Features and Advantages of Composite FRP Products Some of the silent Features and Advantages of Composite FRP Products are:

Excellent resistance to moisture and water

No effect of temperature and heat

Weather & corrosion resistant

Smooth surface

Durable

Excellent finish

Available in different sizes and in built attractive colors


Capabilities JuNeng™ Epoxy Countertops & Laboratory Work Surfaces

JuNeng™ Epoxy Countertops



JuNeng™ Laboratory Surfaces

Composite FRP Solar Cooker

Composite FRP Solar Water Heater

FRP Framework Solar Panel Support

JuNeng NigLtd offers high quality range of Epoxy Resin Countertops & Laboratory Work Surfaces that are made using premium materials, which ensures their extreme durability, aesthetical pleasing, trouble free performance and maintenance free. We offer these countertops in a wide variety of custom from epoxy countertops (available in different exquisite designs, colors, & sizes), and phenolic (available in white, black, gray and off white) countertops to maple hardwood or stainless steel. We also offer traditional high-pressure laminate lab tops. JuNeng NigLtd has a wide spectrum of color combinations to choose from. We also provide our clients with customize designs based upon unique individual lab /work surface requirements for: Resistance to the chemicals to be used, Heat resistance, Liquid absorption, Load bearing capabilities, Impact and abrasion resistance, Electrical conductivity, Liquid containment and liquid disposal (especially in sink areas and fume hoods), Ease of maintenance, Ergonomics, Availability, Color, Overall appearance, Special requirements (i.e., irregular shapes, minimal joints, etc.). Whether you like a traditional look or more modern resin laboratory countertops, all of our lab tops are designed for beauty as well as durability and longevity.

These countertops are suitable for Universities & Colleges, Hospitals & Private Medical Facilities, Research (R&D) Facilities, Pharmaceutical Companies, Water treatment Facilities, Biological Science Labs, Ministry of Health & Education, Public Works Authority, Microbiology / Biomedical Laboratories, Molecular Pathology, Industrial Lab Testing, etc., or anywhere else where a safe, long-wearing, corrosion resistant and easy to clean countertop surface system is needed.

JuNeng™ FRP Components for Renewable Energy Technologies

The need of a broader utilization of renewable energy technologies becomes more and more obvious because of the increasing prices of fossil energy and their upcoming shortage. A rapidly growing market and substitution is needed in order to achieve a significant share rapidly and in time. Fibre reinforced polymeric materials offer a great potential to meet the requirements from the market better than the materials currently in use and thus lead to a break through for renewable energy production. Examples for components which could be substituted by polymers: reflector substrates, glazing for collectors, absorber, insulation materials, casing for collectors, sealant, overheating protection devices, storage materials, containers, insulation, heat exchangers, etc. JuNeng NIG is pioneering new product lines of natural fibre reinforced composite materials for renewable energy technologies and applications. Today, end applications can be found in biogas digesters, solar water still, solar dryers, solar chicken brooder, solar water heater, hot water storage tanks, solar panel framework, solar battery casing, wind turbine blades, etc. We are also suppliers of high quality renewable energy materials and technologies.


Capabilities JuNeng™ Civil, Electrical & Mechanical Structures

Composite FRP Wall Cladding Panel Solutions

Concrete Deck Floor & Screed Construction

JuNeng™ Waste Incinerator Design

JuNeng Pre-designed Sewage Treatment Plant

Restoration, repair & retrofit of corrosion damaged

concrete structures

FFP Column, Capitals & Windom Covers

JuNeng NIG specialized in the design, procurement and construction of turnkey Projects related to the following:

EPIC projects

Oil & Gas facilities

Power and desalination plants

Petrochemical plants

Industrial plants

Sewage treatment plants

Waste management facilities

Water treatment plants

Water transmission systems

Tanks and reservoirs

Maintenance of petrochemical and industrial installations

HV substations JuNeng NIG strength Includes:- Engineering: JuNeng NIG has a highly qualified technical team to manage the requirements and performance of design sub-contractors including any specialized services such as HAZOP. Procurement: Our Procurement team has extensive experience in managing and performing procurement activities for large EPIC contracts. Construction JuNeng NIG construction team has worked on complex projects and has technical experience to meet international contracting standards and capable to perform challenging high-profile diverse projects. Civil Works: • Underground and elevated concrete structures • Cooling towers, Silos, Precast concrete Pipe racks, Culverts • Structural Steel Works, Industrial buildings, Underground utility networks • Industrial/institutional road works, Fencing, Floor and roof screeds • Enabling works, Concrete works, Curtain wall systems, Stone cladding • Architectural finishes Electrical Works: • Supply & erection of major electrical equipment &Telecommunication systems • Power distribution systems, Lighting & power, Fire detection & alarm systems • Programmable logic control systems (PLC), Instrumentation & control works • Scada systems, Structural cabling, Security systems

Mechanical Works: • Supply, fabrication and erection of major process static equipment • Process piping and Pipelines, Pipe gantry’s and support systems • Supply and erection of rotary equipment, HVAC systems, Fire fighting systems • Insulation, Painting and scaffolding works, Cranes, Lifts

• Fire fighting and fire alarm systems • Building management system (BMS)


JJUUNNEENNGG NNIIGG LLTTDD - STRENGTH THROUGH DIVERSITIES -

Projects Portfolio


Projects Summary

Selected Projects FRP, M&E, Civil, Procurements and Industrial Projects

S/N Project Client Value: (N)

Status of Completion

1. Sub-contractor Design, Construction and Installation of FRP Double jacket Hot Water Storage Tank and insulated PVC pipelines Network for water distribution at Loyola Jesuit College, Abuja.

Lovana Nigeria Limited

4,250,00.00

Completed

2.

Design, Construction, Supply and installation of Fibreglass Renewable Energy Components such as Biogas Digester Containers, FRP Vessels, Solar Water Heaters, Solar Chicken Brooders, etc, with all associated civil and M&E works at National Center for Energy Research & Development, NCERD, University of Nigeria, Nsukka, UNN.

Energy

Commission of Nigeria, UNN

1,120,00.00

Completed

3. Shutdown associated works for Innoson Industries, Emene, Enugu, Enugu State.

Innoson Industries

115,00.00

Completed

4. Long term fabrication and maintenance support on call off basis, at Ama Breweries, Nine Miles, Enugu State.

Nigeria Breweries Plc

210,00.00

Completed

5. Design and construction of sewage treatment plant and labour compound infrastructure including boundary wall, paved walk ways and chainlink fence, 20th Anniversary hospital, Uyo.

Awka Ibom State

-

Design Stage

6. Refurbishment and upgrading works for various physics and chemistry laboratory including civil, mechanical, electrical works.

NAUA

-

Completed

7. Construction of paved walk ways, unpaved track road, landscaping and floor for staff parking space.

Reddick - Completed

8. Environmental clean-up for New Face of Imo Project including excavation and removal of waste, transportation from street site and placement at engineered landfill site in Nekede.

Imo State government

-

Completed

9. Sub-contractor EPIC of 2600 m² pre-engineered warehouse structure building with all associated M&E works at Delta Glass expansion project in Lagos.

Delta glass

-

Completed

10. Sub-contractor EPIC of 3240m² new office building complexes with all associated paved walk ways and external works including MEP and fire fighting systems at Eko Supreme, Ogun State.

Eko supreme

-

Completed

11. Sub-contractor EPIC of 2x2 storey building facilities with all associated M&E works for Nestle quarter project at Agbara, Ogun State.

Nestle

-

, Completed

12. Design and Construction Epoxy Resin Flooring National Salt Design Stage

13. Design and Construction Laboratory Epoxy Countertops NAUA Design Stage

14 Design, materials and fabrication for vertical, cylindrical, above ground composite fiberglass Water & Brine Filter Tank at Dangote Sugar Refinery PLC, Shed 20, Apapa Wharf, Lagos, Nigeria

Dangote Sugar Refinery PLC

-

Design Stage


JuNeng Nigeria Limited, Cooperate Profile

Concluding Remarks Quality, Health, Safety and Environment

FRP Weather Shades for multiple utility

Inspection/Repairs Work @ Dangote Sugar

Our Technical Partners

Our Strength is built on Team Work

Responsibility for Quality, Health, Safety and Environment (QHSE) rests

at the top management level of JuNeng Nigeria Limited and is

transferred to down the line for implementation. Everyone in our

organization is accountable for QHSE performance in their respective

area. The protection of human health, personal safety and environment

rank at the highest level of importance to us. We operate in a diligent

and responsible manner consistent with other worldclass corporations

and aligned with our stated QHSE business goals and policy.

The quality of everything we make and do brings value to our customers

and justifies their decision to do business with us. Therefore, JuNeng

NIG is interested in discussing your current and future projects as well

as the appropriate timing for presentation of our specialized capabilities

in the selection, procurement, design and management of the non-

metallic composite materials services and teachings. JuNeng NIG is well

suited to contract directly with the project owner, or to join the project

team as a sub-consultant to the project Architect/Engineer or Contractor.

Thank you for reviewing the enclosed information. If you have any

questions or would like to discuss how JuNeng corporate products and

services can enhance your project or business, please don’t hesitate to

contact us. We look forward to the opportunity of working with you.

Best Regards,

Agbiogwu, Darlington O.

JuNeng Nigeria Limited.

Phone: 08034806486 or 08085308968 or 08189693174 or

08151482687 or 08139454807

Email: [email protected] or [email protected]

Please visit our Internet web site at www.junengnigltd.ng.cm

JuNeng Company Profile

Documents

Transcript of JuNeng Company Profile